Overview. Contents. Custom Features. Print Environment. Overview AB Media Corel Draw 12 Settings... 5 Printer Driver Settings...

Size: px

Start display at page:

Download "Overview. Contents. Custom Features. Print Environment. Overview AB Media Corel Draw 12 Settings... 5 Printer Driver Settings..."

Easter Lewis
5 years ago
Views:

2 Contents Overview Custom Features Print Environment AB Media Settings to Use f AB Media Media Feed Orientation Cel Draw 12 Settings Printer Driver Settings Paper/Quality Tab Job Options Tab Col Tab Overview Custom Features NOTE The term HDD throughout this document stands f Hard Disk Drive. Three custom media types f printing some special media have been downloaded to the printer HDD and can be selected from the printer driver when printing. Two custom col profiles have been downloaded to the printer HDD and can be selected from the printer driver when printing. The Printer Output Profile setting Default is recommended f all AB media. Driver default settings f AB: Print Quality: Fine / Detail (600x1200) Media Check: Off Col Mode: Graphics Pro CMYK input Profile: SWOP Printer Profile: Default The AB special media names have been added to the driver's Media Type selection. Print Environment Item Anheuser-Busch Comment Printer OKI C9600 HDD and Duplexer are installed. Custom Media Table Custom Col Profiles OS See page 2 f details. See page 8 f details. Windows 2000/XP Application Cel Draw 12 Custom AB media selections appear only in the Windows 2000 and XP drivers. Two are provided: Default Alternate Driver PostScript Windows 2000/XP specific version. Currently, Windows Logo is not available. 1

3 AB Media Media Type: Set the Media Type in the printer driver rather than in the printer menu. Paper /Output Bin: Use the suggested paper tray and output bin to prevent paper jams and misfeeding. Col Profile: Use the Default setting f the Graphics Pro Col Mode Printer Output Profile (see page 8). AB Media Types: Specific AB media types (e.g., AB CARDSTOCK) only appear in the Windows 2000 and XP drivers. F other Windows operating systems, select the alternate media type shown. Settings to Use f AB Media Media Select Media Type a Paper St Edge Versus Long Edge b Output Bin c Select Black Finish Comments Plain Paper Automatically Selected Any Either Either N.A. The printer automatically optimizes the print mode settings. #80 White Opaque Card Stock: AB-CS AB-CS AB-CS AB-CS AB-CS PT Paper: SSD-95LTR SSD x 18 SSD-95LGL Fold-up Table Tents, 3 up per sheet: SSD - Tabletents 12 x 19.12" 12 x 12 Triangle diecut adhesive: AB - LFV1212 White Low Tack Laser Vinyl (4 up): TMS - WCDSL-4 Frosted Low Tack Laser Vinyl (4up): TMS - FCDSL-4 Shelf Strip Media " x 11" strips (Matte): SSD-SS11x85 AB CARDSTOCK Ultra Heavy 2 AB GLOSSYPAPER Ultra Heavy 2 AB TABLETENTS Ultra Heavy 2 AB CORNERCLING Ultra Heavy 2 AB WHITECOOLER Ultra Heavy 1 (35-50 lb) AB FROSTEDCOOLER Ultra Heavy 1 (35-50 lb) AB SHELFSTRIPS MT User Type 1 (35-50 lb) Long Edge Long Edge - N.A. - (Facedown) - (Facedown) Sht Edge Matte Paper dust can damage the printer and shten the life of consumables. Periodically check f paper dust buildup on the rollers and clean the printer as necessary (see page 9). Befe printing Separate each sheet carefully to avoid multi-sheet feeding. Check f paper dust and chaff, particularly around the cut edge of the media. Paper dust can damage the printer and shten the life of consumables. Periodically check f paper dust buildup on the rollers and clean the printer as necessary (see page 9). If this media has severe curl, reduce the amount of media you load on the to avoid misfeeding. Separate each paper carefully to avoid multi-sheet feeding. Long edge feed causes multiple sheet feed. 2

4 Settings to Use f AB Media (continued) Media Select Media Type a Paper St Edge Versus Long Edge b Output Bin c Select Black Finish Comments Shelf Strip Media six 1.25" x 11" strips (Gloss) AB SHELFSTRIPS GL User Type 2 Sht Edge Separate each sheet carefully to avoid multi-sheet feeding. Long edge feeding causes multiple sheet feed. 4-up Perf 8.5 x 11", Matte Wobbler: AB-WBLRM AB WOBBLER MATTE User Type 1 (35-50 lb) Sht Edge Matte Separate each sheet carefully to avoid multi-sheet feeding. Long edge feeding causes multi-sheet feed. 4-up Perf 8.5" x 11", Gloss Wobbler: AB-WBLRG AB WOBBLER GLOSS User Type 2 Sht Edge Separate each sheet carefully to avoid multi-sheet feeding. Long edge feeding causes multi-sheet feed. Clear Low Tack Laser Vinyl: AB-8018 (Stockton Sticker) AB STOCKTONSTICK User Type 3 (59-80 lb) Long Edge Excess glue from the edges of this media could damage/ shten the printer and consumables life. Clear Cling Film: SSD- CFARK SSD- CFARK1218 AB CLEAR CLING User Type 3 (59-80 lb) Long Edge Separate each sheet carefully to avoid multi-sheet feeding. Excess glue from the edges of this media could damage/ shten the printer and consumables life. White Cling Film: SSD- WFARK SSD-WFARK1218 AB WHITE CLING User Type 3 (59-80 lb) Long Edge Separate each sheet carefully to avoid multi- sheet feeding. Excess glue from the edges of this media could damage/ shten the printer and consumables life. Bottle Top: TMS-BOTTLETOP AB BOTTLEHANGERS Ultra Heavy 2 - Table Tent: TMS-TABINSERT AB TBLTENT INSERTS Ultra Heavy 2 - Paper dust can damage the printer and shten the life of consumables. Periodically check f paper dust buildup on the rollers and clean the printer as necessary (see page 9). a. The AB specific media type names only appear in the Windows 2000 and XP drivers. If you are printing from another Windows operating system, select the alternate media type listed. b. Long Edge feed is restricted to a maximum of 11" c. Face Up = side exit tray (straight-through path), Face Down = top exit tray. 3

s 1 through 5 s 1 through 5 detect the paper size and ientation automatically. 4. Use the key to scroll down to Config, then press Enter. 5. With Paper Size highlighted, press Enter.

5 Media Feed Orientation (T) The ientation of letter-size media must match the media size and ientation in the printer menu. When media is loaded f long edge feed, if the printer menu is not set to Letter Long Edge, pages will be printed rotated 90 degrees. s 1 through 5 s 1 through 5 detect the paper size and ientation automatically. 4. Use the key to scroll down to Config, then press Enter. 5. With Paper Size highlighted, press Enter. Example To change from Letter Sht Edge to Letter Long Edge f the in the printer menu: 6. Use the key to scroll down to Letter Long Edge, then press Enter. An asterisk appears beside Letter Long Edge. 7. Press ON LINE to save the setting and exit the menu mode. 1. Press the Enter key to switch to the menu mode. 2. Use the key to scroll down to Menus, then press Enter. 3. With Configuration highlighted, press Enter. 4

Cel Draw 12 Settings Befe printing, click the Tools pull-down menu

Make sure that the profiles in red boxes below are selected as

PostScript Tab Make sure that the Screen frequency is set to

When printing a file from Cel Draw 12, make the following settings

6 Cel Draw 12 Settings Befe printing, click the Tools pull-down menu and select Col Management. Make sure that the profiles in red boxes below are selected as shown (default settings). PostScript Tab Make sure that the Screen frequency is set to Default (the default setting). When printing a file from Cel Draw 12, make the following settings in the print dialog box. General Tab Make sure that Use PPD is deselected (the default setting). Misc Tab Make sure that the options in red boxes below are set as shown (the default settings). 5

Printer Driver Settings (Windows 2000/XP) a. Set the Media Type: refer to the Media table on page 2.

Printing Preferences. Windows XP: click Preferences. The Printing Preferences dialog box appears.

Select the Paper Source: refer to the Media table on page 2. 2. Click Advanced.

7 Printer Driver Settings (Windows 2000/XP) a. Set the Media Type: refer to the Media table on page 2. In the Print dialog box, on the General tab: Windows 2000: right click the printer icon, then select Printing Preferences. Windows XP: click Preferences. The Printing Preferences dialog box appears. NOTE The illustrations shown below are from Windows XP. Paper/Quality Tab 1. Select the Paper Source: refer to the Media table on page Click Advanced. The Advanced Options dialog box appears. NOTE If the media table recommends the Face-up Output Bin f the media, this must be selected on the Job Options tab befe the Media Type is selected. 6

b. Make sure that Media Check is set to Off (the default

If this option is set to On, the printer may show Media Type

8 b. Make sure that Media Check is set to Off (the default setting). If this option is set to On, the printer may show Media Type Mismatch on the LCD display during printing. Job Options Tab c. Set the Switch option to Off. 1. On the Job Options tab, select Fine / Detail (the default setting) f the Quality. 2. Select the appropriate Output Bin: refer to the Media table on page 2. NOTE Make sure to open the printer's face-up stacker do when " " is selected. 3. Click OK. d. Click OK. 3. Click OK. 7

Select Graphic Pro, then click Details. The Graphics Pro Details dialog box appears.

9 Col Tab NOTE F general office documents, select Automatic under Col Mode. Graphics Pro Details Dialog Box a. Make sure that the Input and Output Profiles in red boxes below are set as shown. 1. Select Graphic Pro, then click Details. The Graphics Pro Details dialog box appears. NOTE The AB custom col simulation is designed to print Budweiser red as effectively as possible. If other red tones are not vivid enough, try setting CMYK Input Profile to None. b. Click OK. 2. Click OK. 8

Cleaning the Rollers Cleaning your printer s Multi-Purpose () rollers assures

Cleaning the Outer Roller Check the outer roller (1) frequently f dust

even though you have cleaned the outer roller, you should clean the inner

The tray suppt table moves down. 2. Move the paper guides inward slightly. 3.

Remove the print media from the. The tray suppt table moves down. 2.

10 Cleaning the Rollers Cleaning your printer s Multi-Purpose () rollers assures smooth, jam-free operation. Cleaning the Outer Roller Check the outer roller (1) frequently f dust build-up, especially when printing on dust-prone media such as AB #80 White Opaque Card Stock Table Tents. Cleaning the Inner Rollers Periodically, if you should experience jamming even though you have cleaned the outer roller, you should clean the inner rollers as well. 1. Remove the paper from the. The tray suppt table moves down. 2. Move the paper guides inward slightly. 3. Unlock the hinge latches at each end by pivoting them up. 1. Remove the print media from the. The tray suppt table moves down. 2. Dampen a soft, lint-free cloth with 90% isopropyl alcohol, then use the cloth to clean the outer roller. 3. Replace the print media in the. 4. Lift the slightly and pull in on the hinge to release the pin from the track. Repeat on the other end. 9

the rubber pad on the front roller access do. 9.

Swing open the front roller access do. 10.

slightly and place the hinge pins on each side

11 5. Lift the top roller cover. 8. Use a fresh area of the cleaning cloth to wipe the rubber pad on the front roller access do. 9. Close the front roller access do. 6. Swing open the front roller access do. 10. Lower the top roller cover, then lift the slightly and place the hinge pins on each side back in the track. 7. Dampen a soft, lint-free cloth with 90% isopropyl alcohol, then use the cloth to wipe all three rollers clean. 11. Push back on the hinge latches to lock the hinges in place. 12. Move the paper guides back to fit the print media, then replace the media in the. 10

12 Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ Tel: (856) FAX: (856) my.okidata.com Oki Data Americas, Inc., 2735 Matheson Blvd. East, Unit 1, Mississauga (Ontario), Canada L4W 4M8 Tél. : Téléc. : (905) Oki Data de Mexico, S.A. de C.V., Mariano Escobedo No Piso, Col Anzures, e. p , Mexico, DF Tel: FAX: Oki Data do Brasil Infmática, Ltda., Av. Leonardo da Vinci, 1178/1182, Jabaquara, São Paulo, Brasil Tel.: Grande São Paulo , Demais localidades FAX: (5511) okidata@okidata.com.br OKI is a registered trademark of Oki Electric Industry Company, Ltd.; marque déposeé de Oki Electric Industry Company, Ltd.; marca registrada Oki Electric Industry Company, Ltd Oki Data Americas, Inc Rev. A

Hard Disk Drive Installation Instructions

Hard Disk Drive Installation Instructions HDD PART NUMBER 70043501 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no