DT243-D4 4.3" COLOR TFT MONITOR USER MANUAL. Please read this manual carefully before using the product you purchase,and keep it well for future use.

Size: px

Start display at page:

Download "DT243-D4 4.3" COLOR TFT MONITOR USER MANUAL. Please read this manual carefully before using the product you purchase,and keep it well for future use."

Barrie Dominick Thomas
6 years ago
Views:

1 2 DT-ENG-243-D4-V1 / WIRE SYSTEM DT243-D4 4.3" COLOR TFT MITOR USER MANUAL Please read this manual carefully before using the product you purchase,and keep it well for future use. Please note that images and sketch maps in this manual may be different from the actual product.

2 CTENTS 1. Part And Functions Mounting Basic Door Release Operation Monitoring Door Station / Camera Intercom Function Entrance Playback No Disturb Function Divert Call Opening Staircase Light Setup Function Monitor Parameter Setting Basic Connection Screen and Volume Adjustment Specifications

3 1 2 PSAU GND RING SW- SW+ 3 L L1 1 2 PSAU GND RING SW- SW+ 3 L L1 1. Parts And Functions Microphone LCD Screen Mounting Hook Handset Handset Handset Line 2 Up button Mon/Talk button UNLOCK button Return button Down button MENU button Connection Port Mounting Hook Handset Line Speaker No Disturb button Call button/unlock 2nd button Front view Back view Terminal Description RING SW- SW+ GND PSAU L2 L1 SW+,SW-: Door bell call button connection port. RING,GND: Extra buzzer connection port. PSAU: Reserved. L1,L2: Bus terminal. switches: Total 6 bits can be configured. Bit1~Bit5: Used to User Code setting. Bit6: Set to if the monitor is at the end of the line or works with DBC4A1. Otherwise, set to OFF. -1-

4 2. Mounting 145~160 cm 1. Use the screws to fix the Mounting Bracket on the mounting box.(fitting accesories includes a Bracket (Two pieces of 4X25 screws are needed for fastening the Mounting Bracket), Special 2 wire connectors to connect with Monitor) 2. Wire the system correctly(see the later connection chapter) then hang the Monitor on the Mounting Bracket firmly. 3. Press Menu button, in standby mode, the main menu page will be shown as follows: Monitor By Select Intercom Call Playback Don t Disturb 4. Basic Door Release Operation 1. Press CALL button on outdoor station, the Monitor rings, meanwhile, the screen displays the visitors' image. 2. Pick up handset (or press Mon/Talk button on panel), you can communicate hands free with the visitor for 90 seconds. After finishing communication, hand up the handset (or press 00:23 DS-1-2-

5 2 2 Monitor By Select Intercom Call Playback Don t Disturb 2 DS-1 DS-2 DS-3 DS-4 Select a Camara 2 00:23 DS-1 Mon/Talk button again/or press Return button) to end the communication. If nobody answers the phone, the screen will be turned off automatically after 40 seconds. 3. During talking state, Press Unlock button to release the first door. If the system connect 2 locks, press Call button/unlock 2nd button to open the second door. 5. Monitoring Door Station / Camera You can monitor the entrance at any time via the monitor. 1. Press Menu button on the panel in standby mode. 2. Select Monitor by Select item on main menu page, and then press Menu button to enter Select a Camera page. *Note: Press Mon/Talk button on panel in standby mode to monitor the master door station in shortcut. Monitoring door stations/cameras: DS1~4 and CAM1~4 can be selected to monitor individually if the system installs multi door stations/cameras.see the following steps: * Use / button to move upward / downward to select the item you want. * During monitoring, images can be viewed, but audio cannot be heard. * If there is a visitor at the entrance, press Mon/Talk button on panel to begin communication with door station. -3-

*Note: Press Call button/unlock 2nd button on panel in standby mode to enter the select intercom page in shortcut. Namelist Call: User in one apartment can call other apartments in the system.

6 6. Intercom Function When the monitor is in standby mode, press Menu button to enter main menu page. Use / button to move upward / downward to select Intercom Call item, press Menu button to enter the select intercom page, you have 3 items to select. *Note: Press Call button/unlock 2nd button on panel in standby mode to enter the select intercom page in shortcut. Namelist Call: User in one apartment can call other apartments in the system. the namelist will be created automatically by the system. Use / button to selete a name on the screen then press Menu button to call.(note:1. Press "MENU" button again to redial. 2.The switches code of the monitors are not the same.) Monitor By Select Intercom Call Playback Don t Disturb Select Intercom Namelist Call Call Guard Unit Inner Call Namelist Call [01] [02] [03] [04] Pick up handset, or use / button to selete Intercom Call item, then press Use / button to selete Namelist Call item,then press Menu button to confirm. Use / button to selete the item you want, then press Menu button to call. [01] Calling. Inner Call: If multi Monitors are installed in the same apartment, select Inner Call, all the other Monitors will ring at the same time, whichever Monitor answers the call, conversation is started, and the other monitors will stop ringing at the same time.(note:the switches setting of all monitors must be same. ) Call Guard Unit: A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Monitor answers the call, conversation with the guard person is started. -4-

7 7. Entrance Playback When the monitor is in standby mode, press Menu button to enter main menu page. Use / button to move upward / downward to select Playback item, press Menu button to confirm, the screen will display the playback page. *Note: The playback function requires SC6V to support. 8. No Disturb Function If you don't want to be disturbed,for example,at night. Activating the mute function is necessary for you. When the monitor is in standby mode, press Menu button to enter main menu page. Use / button to move upward / downward to select Don't Disturb item, press Menu button to enter the no disturb page, you have 4 items to select. Follow the steps: Monitor By Select Intercom Call Playback Don t Disturb No Disturb Normal 1 H 8 H Always Use / button to selete Don't Disturb item, then press Use / button to selete the item you want, then press Menu button to confirm. *Note: Press shortcut. No Disturb button on panel in standby mode to enter the no disturb page in -5-

8 9. Divert Call When the monitor is in standby mode, press Menu button to enter main menu page. Use / button to move upward / downward to select Divert Call item, press Menu Button to enter the call divert options page, you have 4 items to select. Follow the steps: Monitor By Select Intercom Call Playback Don t Disturb Divert Call Light Setup About Call Divert Options No Divert If No Answer Simultaneously Setup Tel Numbers. Use / button to to scroll pages. Use / button to selete Divert Call item, then press Use / button to selete the item you want, then press 1. No Divert----calls from outdoor station will not be diverted. 2. If No Answer----Calls form outdoor station without respond in 30 seconds will be transfer to the number you set. Even though the monitor will shut off when transfer via GSM/TPS, you still available to operate it (such as monitor, talk, and unlock). 3. Simutaneously----Calls from outdoor station will be diverted to your telephone immediately.at this mode,the monitor won't shut off when GSM/TPS divert sucessfully, but if the monitor answers the call at this time, GSM/TPS will quit absolutely. 4. Setup Tel Numbers.----Select this item to edit the divert numbers you want. 10. Opening Staircase Light When the monitor is in standby mode, press Menu button to enter main menu page. Use / button to move upward / downward to select Light item, press Menu button to enter the light option page, you have 3 items to select. Monitor By Select Intercom Call Playback Don t Disturb Divert Call Light Setup About Light Option Turn On Turn On 5min. Turn Off Use / button to to scroll pages. -6- Use / button to selete Light item, then press Use / button to selete the item you want, then press

9 1.Turn On: Select it to open the staircase light, the staircase light will be turned off automatically after 60 seconds. 2.Turn On 5min:Select it to open the staircase light, the staircase light will be turned off automatically after 5min. 3.Turn Off:Select it to close the staircase light. *Note: the staircase light function will be activated only when the system connect light via DT- RLC module, otherwise, this function is unvalid in normal. For more information, please refer to DT-RLC user instruction in detail. 11. Setup Function When the monitor is in standby mode, press Menu button to enter main menu page. Use / button to move upward / downward to select Setup item, press Menu button to enter the user setup page, you have 4 items to select. Monitor By Select Intercom Call Playback Don t Disturb Divert Call Light Setup About User Setup Ring Tune Ring Volume Monitor Time Language Select Use / button to to scroll pages. Use / button to selete Setup item, then press Use / button to selete the item you want, then press 1.Ring Tune: Select it to set the tune of Door Station, Intercom and Door Bell. 2.Ring Volume: Select it to set the volume of monitor. 3.Monitor Time: Select it to set monitor time. 4.Language Select: Select it to set the language. 12. Monitor Parameter Setting 12.1 How to enter the installation setting page Divert Call Light Setup About Use / button to selete About item, then press About H/W : a1.1 S/W : Addr : Video STD: AUTO Restore Press Unlock button and hold for 3s. [ 0000 ] Installer Setup Use / button to increase/decrease the value you want, and press -7-

10 12.2 Restore to Default The restore to default function allows the user to recover the settings to factory setting. Follow the steps: About H/W : a1.1 Restore? S/W : Addr : Video STD: AUTO Restore Press page. Menu button on About Press 12.3 The setting items and codes Code Setting Item Code Setting Item 2412 Reset To Default Setting Unlock Mode:Close/Open 2499 Restore Factory Settings Bypass Enable/Disable 8000 Master Monitor Video Display Standard 8001~8003 Slave Monitor Unlock Time Guard Unit / Not Guard Unit Door Station Use Unified /Independent ringtones Setting Slave Monitor Panel On/Off Enable/Disable Intercom Call 12.4 How to set the monitor as a Guard Monitor A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Monitor answers the call, conversation with the guard person is started.. The code number of 8004 is used to set the monitor as a guard unit monitor and 8005 is used to cancel this function. -8-

11 How to set the slave monitor address Maximum 4 monitors can be connected in one apartment,one master monitor together with 3 slave monitors, so you should set the address correctly.(note:must have one monitor to be set as master monitor) The code of 8000 is used to set the master monitor. The code of 8001 is used to set the first slave monitor. The code of 8002 is used to set the second slave monitor. The code of 8003 is used to set the third slave monitor How to set the monitor panel on In default mode,when receive a calling,the master and slave monitors will ring at the same time,and just the master monitor can display the image while the slave monitors can not.but the settings can be changed,you can set the master monitor and all the slave monitors to panel on at the same time when receiving a call, just input the code number of 8006 on each slave monitor How to set the unlock parameter Unlock mode: There are two unlock modes: 1.power-on- to-unlock type:unlock mode=0(by default) 2.power-off-to-unlock type:unlock mode=1. The code number of 8010 is used to set the unlock mode to 0 The code number of 8011 is used to set the unlock mode to 1 Unlock time: The unlock time can be changed by yourself at any time.it can be set from 1 to 9 seconds. The code number from 8021 to 8029 are used to set the unlock time to 1~ 9 seconds. -9-

12 12.8 User Code Setup In the DT system,every apartment must have a unique identification called User Code. The swiches are used to configure the User Code for each Monitor. When multi Monitors are installed in one apartment, these Monitors have to use the same User Code setting, and the Master/Slave mode should be set on the Monitor. Bit-1 to Bit-5 are used to User Code setting. The value is from 1 to 32, which have 32 different codes for 32 apartments. Bit-6 is line terminal switch, which have to be set to if the Monitor is in the end of the line(bus), otherwise set to OFF. The end of the line is terminal that no other section will start from it. Bit-6 line terminal setting: (1) OFF(0) Bit state Setting Bit state Setting Monitor not at the end of the line. Monitor at the end of the line. Bit state User Code Bit state User Code Bit state User Code Code=1 Code=12 Code=23 Code=2 Code=13 Code=24 Code=3 Code=14 Code=25 Code=4 Code=15 Code=26 Code=5 Code=16 Code=27 Code=6 Code=17 Code=28 Code=7 Code=18 Code=29 Code=8 Code=19 Code=30 Code=9 Code=20 Code=31 Code=10 Code=21 Code=32 Code=11 Code=22-10-

13 2 PSAU GND RING SW- SW+ L2 L1 13. Basic Connection AC~ door station PC6A BUS(IM) BUS(DS) Doorbell Button Switch 14. Screen and Volume Adjustment During monitoring or talking, press Menu button, the ADJUST MENU will be displayed. Use Menu button to select the adjustment item; use / button to decrease / increase the value, press Return button to quit the adjust page. 1. Total 4 screen modes can be selected in sequence: Contrast, Bright, Color and Volume. 2. The Bright and Color item is for the image quality setting, adjust the value to get the best image you like. Bright: 5 3. The Volume items are ring tone and talking volume adjustment. -11-

14 15. Specifications Power supply for indoor monitor: DC 20~28V Power consumption: Standby 0.17W; Working status 3.5W Monitor screen: 4.3 inch digital color TFT Display Resolutions: 480(R, G, B) x 272 pixels Video signal: 1Vp-p, 75Ω, CCIR standard Wiring: 2 wires, non-polarity Monitor time: 40 seconds Talking time: 90 seconds Dimensions: 186(H) 191(W) 37(D)mm -12-

15 Note -13-

16 The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. DT-ENG-243/D4-V1

2-Wire Video Intercom System

DT43/D4 USER MANUAL(EN) 2-Wire Video Intercom System Read this manual carefully before using the product, and keep it well for future use. NC GND RING sw- sw+ L1 L2 3 ON DIP NC GND RING sw- sw+ L1 L2 3