DT-TPS. User Manual. Telephone Interface 2-wire series.

Size: px

Start display at page:

Download "DT-TPS. User Manual. Telephone Interface 2-wire series."

Kathryn Montgomery
5 years ago
Views:

1 DT-TPS Telephone Interface 2-wire series User Manual

2 1 About TPS Telephone Interface The TPS Telephone Interface is designed for 2-wire series video door entry systems. Enables to divert calls from Door Station to a land line telephone or a mobile via landline. Requires connection to a landline. Features: Maximum 3 telephone numbers can be programmed Only monitors with Call Divert function are compatible One only TPS Telephone Interface is needed per either house or apartments system Application: House and Apartments systems 1. Terminals Introduction DIP 485 PORT BUS(IN) BUS(OUT) TEL PBX DIP: DIP switches 485 PORT: 485 connection port for updating the software BUS(IN): Input port, connect to power supply BUS(OUT): Output port,connect to Monitor TEL: Connect Green&Red from the telephone cable PBX: Connect Black&Yellow from the telephone cable

3 2 Configuration LED BUTT Power Network Reset Signal Quality Status Transfer Recover Test LED Indicators LED indicator Description Power Network Status Transfer -LED off - TPS not working -LED flashes rapidly - system error -Steady on - TPS works normally -Steady on - TPS works normally -LED flashes ones - system receives the effective instruction -LED off - there is no call divert -LED flashes slowly - TPS in the divert awaiting state -LED flashes 3 times rapidly - divert has failed - Steady on - the system in the talking state *LED flashes ones- all settings are being restored to a default

4 3 Buttons Operating Button Description Reset Signal Quality Recover Test - Press Reset button for 3 seconds, it will restart the TPS - Reserved - Press for 3 seconds for factory default - Reserved 2. Mounting Din rail Step1: Mount the din rail to the wall with screws Step2: Pull down the mounting buckle, then hang the unit on din rail Din rail Mounting Buckle

5 4 3. DIP Switches Settings for TPS DIP DIP State Description DIP1 Not in use DIP2 Set Off - no connection Set On - connected to a telephone network directly DIP3 Door Station speaker adjustment set Off for default volume Door Station speaker adjustment set On to increase the volume DIP4 Door station micphone adjustment set Off for default volume Door station micphone adjustment set On to increase the volume DIP5 Reserved DIP6 Set Off for House system Set On for Apartment system Notes: DIP1 and DIP2 cannot be On at the same time DIP3 and DIP4 cannot be On at the same time

6 5 4.Telephone Numbers Settings on Monitor Touch screen monitors: -Telephone Number- 1> _ 2> _ 3> _ Don t divert calls Divert if not answered Divert simultaneously Exit&save Exit&Unsave Maximum 3 telephone numbers can be programmed Touch the telephone number frame Using the keypad, type in your number and save it Button operation monitors: 1) 0 2) 3) TPS configure 4)Divert mode select: 2 0:Not 1:Not Answer 2:Simulateously Cancel Edit Save&Exit Maximum 3 telephone numbers can be set. Use / Button to move up/down. Press the MENU button to edit. Use / button to increase / decrease the value Divert Modes There are 3 types of divert modes 1 - Do not divert calls. Calls from door station wan t be diverted 2 - Divert if not answered. If video monitor was not answered the call within 25 seconds, the call will be diverted to the telephone number you set. In this mode, monitor will shut down when TPS diverts successfully. The monitor still can do the operation of monitoring, talking and unlocking 3 - Calls from the door station will be diverted to your first telephone number immediately. In this mode, the monitor will rings with video, telephone will ring as well. If monitor answers the call, TPS will stop diverting and telephone will stop ringing

7 6 5.Operation Instructions Unlocking Hanging up Function Calling next telephone number Description Input 1# on your telephone or mobile phone to release the first lock Input 2# on you telephone or mobile phone to release the second lock Input 9# on your telephone or mobile phone to hang up. Maximum time untill disconnection is 5 minutes 1:Second telephone number must be programmed on monitor 2:If first number on the list did not answer the call, TPS will dial next number Calling extention Add a letter P between main telephone number and extention telephone number and TPS will call the extention telephone 6. Connection to a telephone line Use ready made 4-way BT cable or make your own. The end with BT Telephone Male plug should be plugged into telephone socket. Connection to a terminal on TPS Telephone Interface as shown below:

8 TALK/M TALK/M TALK/M 7 Wiring Daisy chain wiring mode for Houses Code=14, DIP-6=off Code=13, DIP-6=off Code=0, DIP-6=off DPS PS4 TPS AC~ DIP2=On DIP6=Off

9 TALK/M TALK/M TALK/M TALK/M TALK/M TALK/M TALK/M TALK/M 8 Star wiring mode for Houses Code=14, DIP-6=on Code=13, DIP-6=on Impedance switch OFF Code=12, DIP-6=on Code=11, DIP-6=on Code=3, DIP-6=on Code=2, DIP-6=on OFF A B C D DBC4A A B C D DBC4A Impedance switch Code=1, DIP-6=on Code=0, DIP-6=on DIP2=On DIP6=Off DPS PS5 TPS 85~260AC

10 TALK/M TALK/M TALK/M TPS 9 Daisy chain wiring mode for Apartments Code=32, DIP-6=on Code=30, DIP-6=off DIP2=On DIP6=On Code=1, DIP-6=off DPS PS5 85~260AC

11 TALK/M TALK/M TALK/M TALK/M TALK/M TALK/M TALK/M TALK/M 8 Star wiring mode for Apartments Impedance switch OFF Code=32, DIP-6=on Code=31, DIP-6=on Code=30, DIP-6=on Code=29, DIP-6=on OFF Code=4, DIP-6=on Code=3, DIP-6=on A B C D DBC4A A B C D DBC4A Impedance switch Code=2, DIP-6=on Code=1, DIP-6=on DIP2=On DIP6=On DPS PS5 TPS 85~260AC

12 7.Specification Power input: DC 20~28V Power Consumption: Standby(26V):30mA;working(26V):80mA Working temperature: -10ºC +40ºC Wiring: 2 wire, no-polarity Dimensions: H90 x W72 x D60mm 72 mm 90 mm 60 mm The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved

DT-TPS. User Manual. telephone interface

DT-TPS. User Manual. telephone interface DT-TPS telephone interface User Manual Please read this manual carefully before using the product you purchase, and keep it well for future use.we reserve the right to modify the specification in this