How to configure the Matlab interface

Transcription

1 How to configure the Matlab interface 1. MATLAB must be installed For step 2 (required for MATLAB versions 2009b and over), we need to know whether the 32-bit or 64-bit version of MATLAB is installed. We also need to know the path to the Matlab installation (e.g. c:\program Files\MATLAB\2009b\). 2. PATH environment variable For versions 2009b and over, make sure that the path to the Win32 or Win64 folder in the MATLAB installation to the PATH environment variable is defined: The path for the 64-bit version for Matlab 2009b is typically c:\program Files\MATLAB\R2009b\bin\win64. For the 32-bit version, the path is typically c:\program Files\MATLAB\R2009b\bin\win32. Open the "System Properties" Dialog by holding down the Windows key and pressing the Pause key at the same time. In XP, the dialog is opened directly. In Vista and Window 7, the key combination opens the System Display. Click on the link "Change Settings". In Windows 8, the key combination also opens the System Display. Click on the link Advanced system settings. Skip the step in this description, as you have already chosen the advanced settings. Configuring the Matlab interface Page 1 of 6

2 Select the "Advanced" tab. Configuring the Matlab interface Page 2 of 6

3 Press the "Environment Variables" button. Under "System variables" click on the "Path" variable and press "Edit". In the resulting dialog, enter a semicolon (;) at the end of the path string, and add the path after the semicolon. Press "OK" to close and save the path variable. Press "OK" to close the "System Properties" Dialog. When using Windows Vista/7/8, you will also need to close the Control Panel window afterwards. 3. Additional configuration (only required after a change of your MATLAB configuration after installation of BESA ) Configuring the Matlab interface Page 3 of 6

4 During the installation process of BESA, the program "SetupBesaMatlabInterface.exe" in the BESA root folder was executed. Run this program again when your MATLAB configuration has changed, e.g. after updating your MATLAB version. In the dropdown list, select the Matlab version that you are using. This program performs two operations: it copies the appropriate interface Dll to the BESA root folder and renames it to "BesaMatlab.dll" (32-bit version) or "BesaMatlab64.dll" (64-bit version), and if you are using a 64-bit version it creates an entry in BESA.ini as follows: [Matlab] Platform=64 4. Testing Start BESA and check if Send to MATLAB is displayed in the File menu. If it is, the interface is set up correctly. (Note that the item will be grayed if no file is open in BESA.) Test the interface: open a data file, mark a short (e.g. 1 s) time range, and select File / Send to Matlab to open the Export Dialog: Configuring the Matlab interface Page 4 of 6

5 The Matlab window should open, and BESA will display a progress bar: After the window closes, open the Matlab window, and type "Workspace" to open the workspace window, or "Desktop" to open the standard Matlab desktop. Configuring the Matlab interface Page 5 of 6

6 Examine the "besa_channels" variable, which contains the data for the marked data segment. 5. Troubleshooting if the interface is not working after the above steps If the File / Send to MATLAB... menu item is not shown, this means that either the path (step 2 above) is not defined properly, or that the interface Dll BesaMatlab.dll or BesaMatlab64.dll is not compatible with the currently installed version of Matlab. If the path is correct, then please us at research-support@besa.de, including the following information: Which MATLAB version are you using? Specify also if you are using the 32-bit or 64-bit version. Configuring the Matlab interface Page 6 of 6