Customer Responsibilities
|
|
|
- Lauren Long
- 6 years ago
- Views:
Transcription
1 Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation of your Agilent software, please refer to this specification or set of requirements. Correct site preparation is the key first step in ensuring that your instruments and software systems operate reliably over an extended lifetime. This document is an information guide and checklist prepared for you that outlines the supplies, consumables, space and utility requirements for your equipment for your site. Customer Responsibilities Make sure your site meets the following prior specifications before the installation date. For details, see specific sections within this checklist, including: The computing environment and the necessary space is made available The number & location of electrical outlets for your computer systems and peripherals are planned That your site meets the software, hardware and networking specifications below Locate your sales order information, software authorization codes and/or software licenses/certificates The necessary software media, disks etc are available including upgrade/update disks That a suitable backup solution is identified for your software Availability of a system/network administrator as needed to connect to your intranet Please consult Other Requirements section below for other product-specific information. Complete Final Check: Software Site Preparation Tool. Please visit the following Agilent website to download the Software Installation Site Preparation Tool. US/Support/Downloads/Utilities/SWSitePrepTool/Pages/Default.aspx This easy-to-use tool verifies that your PC meets the necessary hardware and software pre-requisites before installing the Agilent software. If Agilent is delivering installation and familiarization services, users of the instrument should be present throughout these services; otherwise, they will miss important operational, maintenance and safety information. Author to add specific customer activities or additional help, information, or guidance for the customer to follow prior to installation>. Important Customer Information 1. If you have questions or problems in providing anything described as a Customer Responsibilities above, please contact your local Agilent or partner support/service organization for assistance prior to delivery. In addition, Agilent and/or its partners reserve the right to reschedule the installation dependent upon the readiness of your laboratory. 2. Should your site not be ready for whatever reasons, please contact Agilent as soon as possible to re-arrange any services that have been purchased. 3. Other optional services such as additional training, operational qualification (OQ) and consultation for user-specific applications may also be provided at the time of installation when ordered with the system, but should be contracted separately. Issued: 01-DEC-2011, Revision: 01 Copyright Agilent Technologies Page 1 of 3
2 Software Specifications for Workstations, Clients, and Servers Special Notes: 1. Upgrade system to the latest MS Windows Service Pack Specification Description Operating system type(s), versions Minimum Microsoft Windows XP Pro. Recommended Microsoft Windows XP Pro. Comments If Running with Windows 7, please ensure PC is configured to use XP Pro mode in Windows virtual PC mode (Please refer to other requirements section) O/S.NET & other add-ons Language settings/compatibility Regional settings/compatibility Account settings/privileges Specific drivers Computer Hardware Specifications for Workstations, Clients, and Servers Special Notes 1. Author to add special considerations or notes. Specification Description Processor type & speed Minimum Pentium 4 operating at 2GHz or greater microprocessor Recommended Pentium 4 operating at 2GHz or greater microprocessor Comments Memory 256 Mb 512Mb or better Internal Storage/devices/media External Storage/devices/media Video devices SVGA( 800 x 600) Resolution set to High Colour (16bit) Issued: 01-DEC-2011, Revision: 01 Copyright Agilent Technologies Page 2 of 3
3 Audio devices Printing devices Pointing devices Additional devices/ports Microsoft compatible mouse Minimum 2 USB ports and an RS-232 serial communications port Minimum 2 USB ports and an RS- 232 serial communications port Networking Specifications Special Notes 1. Author to add special considerations or notes. Specification Description Network type, bandwidth, speed, protocol etc Additional network or instrument devices/cards requirements Minimum Recommended Comments Important Customer Web Links For additional information about our solutions, please visit our web site at Need to get information on your product? Literature Library - Need to know more? Customer Education Need technical support, FAQs? Need supplies? Document part number: xxxxx-xxxxx Issued: 01-DEC-2011, Revision: 01 Copyright Agilent Technologies Page 3 of 3
![Document Control Logs Revision Log Revision Date Reason For Update [add revision # of doc here] Date of issuance Author to describe main features/changes made for this specific revision Approval Log](/docs-images/78/78577349/images/4-1.jpg "Revision Approver Title of Approver [add rev#] Add approver name here Add approver s function or title here Other Requirements: When running Windows 7, please ensure PC is configured to use XP Pro")
4 Do not include this section in the PDF version. Print only the checklist for the PDF. Do not include this page. This page is NOT intended for customer viewing. See the guidance instructions at the end of the template for more information. Document Control Logs Revision Log Revision Date Reason For Update [add revision # of doc here] Date of issuance Author to describe main features/changes made for this specific revision Approval Log Revision Approver Title of Approver [add rev#] Add approver name here Add approver s function or title here Other Requirements: When running Windows 7, please ensure PC is configured to use XP Pro mode in Windows virtual PC mode by following the configuration procedure below: Issued: 01-Dec-2011, Revision: 01 Copyright Agilent Technologies Page 1 of 7
5 Configuring the PL Instrument Control Software to Run On Windows 7 Summary The PL Instrument Control Software ( IN ) can be used to control the GPC50 GPC system, the 1260 MDS / 390-LC Multi Detector Suite, the Varian 290-LC PIM (Pump Injection system), the Varian 356-RI detector and PL GPC 120 & XT systems GPC systems. This software is only compatible with Windows XP Pro and Windows 2000 and will not install or function correctly under Windows Vista or Windows 7. This document describes how the this control software can be run on a Windows 7 system using the Windows XP Mode running on Windows 7. What is Windows Virtual PC? Windows Virtual PC is Microsoft s virtualization technology for Windows 7. It is the runtime engine for Windows XP Mode and provides a virtual Windows environment for Windows 7. Using Windows Virtual PC, Windows XP Mode applications can be seen and accessed from a Windows 7 desktop What is Windows XP Mode Windows XP Mode is a free addon for Windows 7 Professional and Windows 7 Ultimate and provides additional application compatibility. It allows you to install and run many of your applications for Windows XP directly from your Windows 7-based PC. Comprehensive information about Windows Virtual PC and XP Mode is available from Microsoft at: Issued: 01-Dec-2011, Revision: 01 Copyright Agilent Technologies Page 2 of 7
6 System requirements for Windows Virtual PC 1 GHz 32-bit / 64-bit processor required Memory (RAM) 2GB memory or higher recommended Recommended 15 GB hard disk space per virtual Windows environment Supported host operating system: Windows 7 Home Basic Windows 7 Home Premium Windows 7 Enterprise Windows 7 Professional Windows 7 Ultimate Note: Windows XP Mode is only available in Windows 7 Enterprise, Windows 7 Professional, and Windows 7 Ultimate. Support Documentation & Videos Comprehensive support information about Virtual PC & XP Mode is provide by Microsoft and is available from: Installation of Virtual PC and Windows XP Mode The required installations for your Windows configuration need to be download from Microsoft s web site available from To process is described in detail by Microsoft but in summary involces 3 steps. Step 1: Download Windows XP Mode Step 2: Download Windows Virtual PC Step 3: Update Windows XP Mode Opening Windows XP To install applications in Windows XP Mode, you start by selecting Windows XP Mode from the Windows 7 Start Menu. Issued: 01-Dec-2011, Revision: 01 Copyright Agilent Technologies Page 3 of 7
7 Adding your application You can install applications in Windows XP Mode just as you normally would on a physical PC. For example, you can install applications via web, from storage devices, or from physical media such as CD/DVD. Running Windows XP Mode applications To run your application directly from the Windows 7 desktop, just go to your Start menu. Issued: 01-Dec-2011, Revision: 01 Copyright Agilent Technologies Page 4 of 7
8 Installing the PL Instrument Control and Cirrus Do not connect the GPC 50 or MDS to your PC until all software & drivers are installed. Install and configure Windows XP mode & Virtual PC as described by Microsoft. In Windows 7, click the Start button, click All Programs, click on Windows Virtual PC, and then click Windows XP Mode. You will now get a session of Windows XP running in a new window. Insert the PL Instrument Control software CD into your computer's CD/DVD Run the program LAUNCH.EXE on the CD in the Windows XP session and follow the instructions to install the software and drivers as normal into the XP session not Windows 7. With XP Mode still running connect the GPC50 / MDS. The USB devices of the GPC50 / MDS will be detected and configured in the XP session. If using Cirrus for data collection, it should be installed into the XP session using the same procedure described for the Control software above. Issued: 01-Dec-2011, Revision: 01 Copyright Agilent Technologies Page 5 of 7
9 Running Instrument Control & Cirrus from within XP Mode. To control the instrument and collect data into Cirrus, the programs have to be loaded from the XP mode session. The programs can be launched from within the XP session Start menu or It is possible to drill down to the start menu of the XP Machine directly from the Windows 7 start menu. Use this menu option from Windows 7 start menu to launch XP Mode as a new window It is possible to drill down to the start menu of the XP Machine to launch a specifc program directly from the Windows 7 start menu. Attaching the USB devices to the XP machine on startup of XP Mode The USB devices of the GPC instrument need to be attached to the XP machine on startup of XP Mode. This is achieved by either: Selecting the Attach options for the USB devices in the USB menu of the XP Mode window Screen shot showing the USB devices currently connected to Windows 7 Screen shot of the USB devices currently connected to the XP machine. They can be released back to the Windows 7 machine Issued: 01-Dec-2011, Revision: 01 Copyright Agilent Technologies Page 6 of 7
10 Using the Right click menu on the minimised XP Machine Option available by right clicking on the minimised XP Machine in Windows 7 Example screen shot of the dialog launched from the Manage USB devices menu. Issued: 01-Dec-2011, Revision: 01 Copyright Agilent Technologies Page 7 of 7
Customer Responsibilities
Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation of your Agilent UV-Vis ChemStation software, please refer to this specification and
Customer Responsibilities
Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation of your Agilent Cary WinUV Pharma software, please refer to this specification and
Customer Responsibilities
Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation of your Agilent UV-Vis ChemStation software, please refer to this specification and
Customer Responsibilities
OpenLAB Site Preparation CDS Standalone Checklist and Networked Workstations Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that the
Purpose of Procedure. Customer Responsibilities. Important Customer Information. OpenLAB Data Store Server A Site Preparation Checklist
OpenLAB Site Preparation Data Store Checklist Server A.01.02 Purpose of Procedure To assure the installation of the OpenLAB Data Store Server can be completed successfully by careful preparation and evaluation
Customer Responsibilities
OpenLAB Site Preparation CDS Distributed Checklist ChemStation (A.01.05) Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that the installation
Customer Responsibilities
OpenLAB Site Preparation CDS Distributed Checklist EZChrom (A.01.05), AIC's, CDS Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that
Customer Responsibilities-networked
OpenLAB Site Preparation CDS Distributed ChecklistEZChrom Edition A.04.07 SR2 Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that the
OpenLAB Site Preparation CDS Distributed Checklist EZChrom (A.04.06), AIC's, CDS Clients, Instruments. Customer Responsibilities
OpenLAB Site Preparation CDS Distributed Checklist EZChrom (A.04.06), Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that the installation
Customer Responsibilities-networked
OpenLAB Site Preparation CDS A.02.02 Checklist SR2 ChemStation or EZChrom Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that the installation
Customer Responsibilities
OpenLAB Site Preparation CDS Standalone Checklist and Networked Workstations Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that the
Customer Responsibilities
OpenLAB Site Preparation CDS Distributed Checklist ChemStation (C.01.07) AIC s, Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that
Customer Responsibilities
OpenLAB Site Preparation CDS Distributed ChecklistChemStation Ed. C.01.07 SR2 Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that the
OpenLAB Site Preparation CDS Distributed Checklist ChemStation (C.01.06) AIC s, CDS Clients, Instruments. Customer Responsibilities
OpenLAB Site Preparation CDS Distributed Checklist ChemStation Thank you for purchasing Agilent software. Correct site preparation and evaluation is the key first step in assuring that the installation
OpenLAB Data Store Server A Site Preparation Checklist. Purpose of Procedure. Customer Responsibilities
OpenLAB Site Preparation Data Store Checklist Server A.02.01 Purpose of Procedure To assure the installation of the OpenLAB Data Store Server can be completed successfully by careful preparation and evaluation
Professional Edition. Hardware Requirements
Professional Edition Hardware Requirements For Blackbaud FundWare 1 to 8 user environments Revised August 6 th, 2008 Table of Contents Supported Platforms... 3 Single-User Environment... 4 2-User Environment...
Agilent 2100 Bioanalyzer System & Applications Site Preparation Checklist
Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation, please refer to this specification or set of requirements. Correct site preparation
L AB: W I N D O W S 7 V I R T U A L I Z A T I O N
Revision Date: 5/31/2013 Time 1.0 Hours O V E R V IEW In this lab, you will set up a Virtual PC Environment that you can configure at home to complete the lab activities in this course. L AB ACTIVIT IES
Varian Modular HPLC System Galaxie Driver Installation and Configuration Instructions
Varian Modular HPLC System Galaxie Driver Installation and Configuration Instructions These instructions, and the Varian Modular HPLC System Galaxie Driver, are for use with a Varian Modular HPLC System
Sage ACT! PRO 2011 System Requirements
Sage ACT! PRO 2011 System Requirements Important Note: All minimum system requirements are based on a single-user environment (one computer accessing a local database). In a shared environment, Sage ACT!
Customer Responsibilities
For Research Use Only. Not for use in diagnostic procedures. Thank you for purchasing the Agilent G5590A BenchCel Workstation. To get you started and to assure a successful and timely installation, please
Identify Windows Editions and Upgrade Paths
L E S S O N 2. 1 Identify Windows Editions and Upgrade Paths L E S S O N 2. 1 Lesson Overview Identifying Windows editions and upgrade paths. In this lesson, you will: Identify Windows editions Identify
F-Secure PSB Getting Started Guide
F-Secure PSB Getting Started Guide F-Secure PSB Getting Started Guide TOC 3 Contents Chapter 1: Introduction...5 Chapter 2: Getting Started...7 Creating a new account...8 Downloading Software...9 Recovering
Installing and Setting Up the Snap-on EPC. Rev.1.6 (12 Apr 2012) PN EN
Installing and Setting Up the Snap-on EPC Rev.1.6 (12 Apr 2012) PN 275-0800-EN Table of Contents 1. Introduction... 3 2. Minimum Requirements... 4 3. Installing the Snap-on EPC... 6 4. Licensing the Snap-on
Copyright Autodesk, Inc.
Customer and Administration Building, Ditzingen, Germany - Design by Barkow Leibinger Architects Copyright 2003-2008 Autodesk, Inc. Table of Contents 1 Introduction... 3 What is Facility Manager?... 3
Standard System Specifications
Standard Instrument Manager 8.10 Put science on your side. Table of contents 1. Introduction 3 2. Dedicated Instrument Manager Server 3 2.1 Server Class Computer (Recommended) 3 2.2 Using a Workstation
Customer Responsibilities
For Research Use Only. Not for use in diagnostic procedures. Thank you for purchasing an Agilent G5573A Bravo NGS Option A. To get you started and to assure a successful and timely installation, please
Lab Determining Data Storage Capacity
Lab 1.3.2 Determining Data Storage Capacity Objectives Determine the amount of RAM (in MB) installed in a PC. Determine the size of the hard disk drive (in GB) installed in a PC. Determine the used and
3M Molecular Detection System Software Upgrade/Installation Instructions
User Manual Supplement Number: TB.342837.03 Effective Date: March 2018 Supersedes: TB.342837.02 Technology Platform: 3M Molecular Detection System Originating Location: St. Paul, MN 3M Molecular Detection
Installing and Setting Up the Snap-on EPC. Rev.1.10 (10 Oct 2013) PN EN
Installing and Setting Up the Snap-on EPC Rev.1.10 (10 Oct 2013) PN 275-0800-EN Table of Contents 1. Introduction... 3 2. Minimum Requirements... 4 3. Installing the Snap-on EPC... 6 4. Licensing the Snap-on
Minimum System Requirements for Horizon s new Windows Product
Introduction The Windows Version of Horizon s PROMISE home care management software is a web-enabled application that will be hosted on your own in-house server and accessed over your local area or wide-area
Sage BusinessWorks v8.0 System Standards
. Sage BusinessWorks v8.0 System Standards For the latest revisions to this document, go to www.sagebusinessworks.com/product/sys_req.asp Note: The matrices beginning on page 6 are intended to provide
Avigilon Control Center Virtual Matrix User Guide
Avigilon Control Center Virtual Matrix User Guide Version 5.0.2 PDF-ACCVM-A-Rev2 Copyright 2013 Avigilon. All rights reserved. The information presented is subject to change without notice. No copying,
ACT! by Sage Corporate Edition 2010 System Requirements
ACT! by Sage Corporate Edition 2010 System Requirements (Includes ACT! by Sage Premium and ACT! by Sage Premium for Web) Important Note: All minimum system requirements are based on a single-user environment
Customer Responsibilities
Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation, please refer to this specification or set of requirements. Correct site preparation
Unity Loader V2.3 Readme
Unity Loader V2.3 Readme Table of Contents 1 SYSTEM REQUIREMENTS... 2 2 SETUP PROCEDURE... 2 2.1 Recommendations before installation... 2 2.2 Unity Loader Setup procedure... 2 2.3 Communication Drivers
GP-N100 Utility Software Manual
System Requirements En Thank you for your purchase of a GP-N100. This manual describes how to use the GP-N100 Utility to download the latest assisted GPS data from Nikon servers to your GP-N100. To ensure
IDIS Solution Suite. Streaming Service. Software Manual. Powered by
Solution Suite Software Manual Streaming Service Powered by Before reading this manual This Operation Manual provides instructions for using Solution Suite, a network integration solution enabling remote
VMware View Upgrade Guide
View 4.0 View Manager 4.0 View Composer 2.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition. To check for
Sage BusinessWorks Accounting 2012 System Standards
Sage BusinessWorks Accounting 2012 System Standards Hardware Standards (all editions): Laser or high-speed ink jet printer Notes: Multi-purpose printers: Sage BusinessWorks functions correctly with most
Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice.
Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing and using the software, please review the readme files,
Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice.
Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing and using the software, please review the readme files,
Sage 300 ERP. Compatibility Guide Version Revised: Oct 1, Version 6.0 Compatibility Guide i
Sage 300 ERP Compatibility Guide Version 2012 Revised: Oct 1, 2012 Version 6.0 Compatibility Guide i Overview 2 Sage ERP Accpac Contents Overview... 1 Version 2012 Compatibility... 2 All Environments...
QUICKBOOKS PRO 2008 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES
QUICKBOOKS PRO 2008 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES Installing QuickBooks Pro 2008 Software Before installing the software, verify that your computer meets the following minimum system
INDOT PAVEMENT SUBSURACE CONDITION EVALUATION SOFTWARE MANUAL. Version 1.0
INDOT PAVEMENT SUBSURACE CONDITION EVALUATION SOFTWARE MANUAL Version 1.0 January 2013 DISCLAIMER The contents of this manual do not necessarily reflect the official views or policies of the Indiana Department
CDR DICOM Quick Start Guide
CDR DICOM Quick Start Guide Schick Technologies, Inc. 30-30 47 th Avenue Long Island City, NY 11101 USA (718) 937-5765 (718) 937-5962 (fax) PART NUMBER B1051042 REV. B Copyright 2008 by Schick Technologies,
IntelliTrack DMS (Data Management System) v8.1 Quick Start Guide Preliminary Copy (July 2011) Copyright 2011 IntelliTrack, Inc.
Quick Start Guide Reasonable measures have been taken to ensure that the information included in this guide is complete and accurate. However, IntelliTrack reserves the right to change any specifications
Agilent GeneSpring Software
Agilent GeneSpring Software Installation Guide Quick Start Installation of Agilent GeneSpring 3 Detailed Instructions for Installing Agilent GeneSpring 5 Managing Licenses 16 Upgrading Agilent GeneSpring
SCT 3000 Smartline Configuration Toolkit Model SCT 101 Specifications
SCT 3000 Smartline Configuration Toolkit Model SCT 101 Specifications 34-CT-03-02 March 2010 Description The Smartline Configuration Toolkit is a PC-based engineering and maintenance tool designed specifically
ProSystem fx Engagement
ProSystem fx Engagement Guide November 2008 Copyright 2008 CCH INCORPORATED. A Wolters Kluwer Business. All Rights Reserved. Material in this publication may not be reproduced or transmitted, in any form
1 Minimum system requirements
Metrohm AG CH-9100 Herisau Switzerland Phone +41 71 353 85 85 Fax +41 71 353 89 01 info@metrohm.com www.metrohm.com Installation tiamo 2.x 1 Minimum system requirements Operating system RAM Memory Serial
Pastel ACT! What s New? What s New? Version ACT! What s New Version 13
Pastel ACT! Version 13 Version 13 What s New? What s New? 1 ACT! What s New Version 13 ACT! by Pastel 2011 Version 13 What s new in ACT! by Pastel 2011 Version 13 The ACT! by Pastel 2011 release is focused
Trend Micro Core Protection Module 10.6 SP1 System Requirements
Trend Micro Core Protection Module 10.6 System Requirements Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing
ThinkCentre M57e systems offer excellent performance at a competitive price
Lenovo Europe Announcement ZG08-0237, dated February 26, 2008 ThinkCentre M57e systems offer excellent performance at a competitive price Description...2 Warranty information... 5 At a glance Benefits
INIT USER S MANUAL (1)
INIT USER S MANUAL (1) The INIT (Integrated Network Installation Tool) program is provided with the product for remote operation. You can connect to the product remotely via Ethernet to change its settings
MYOB Enterprise Solutions software system requirements guidelines. Thursday, 6 May 2010 Version 2.0
MYOB Enterprise Solutions software system Thursday, 6 May 2010 Version 2.0 Contents 1 System Requirements... 4 1.1 Overview... 4 1.2 Server requirements... 4 1.2.1 Server Requirements (excluding Terminal
CorpSystem Workpaper Manager Installation Guide
CorpSystem Workpaper Manager Installation Guide August 2011 Copyright 2011 CCH INCORPORATED. A Wolters Kluwer business. All Rights Reserved. Material in this publication may not be reproduced or transmitted,
Get Started. Document Management 9.7.1
Get Started Document Management 9.7.1 NOTICE This document and the Sage Timberline Office software may be used only in accordance with the accompanying Sage Timberline Office End User License Agreement.
Installing Windows Vista TM Business on HP Compaq Business 4400, 6300, 7300, 7400 notebook models
Installing Windows Vista TM Business on HP Compaq Business 4400, 6300, 7300, 7400 notebook models Introduction... 2 Purpose... 2 Audience... 2 System requirements and prerequisites... 2 Appendix A: Known
AERMOD View. Course Installation & Web License Activation
AERMOD View AERMOD View is a Microsoft Windows -based program that can be installed in the following Windows operating systems (32-Bit or 64-Bit): Microsoft Windows 7 (Home Premium, Professional and Ultimate
DocSTAR v3.3 Software Installation Guide Page 1
Software Installation Guide (v3.3) Revision 2 6/21/2004 Software Installation Guide (v3.3) Revision 2 6/21/2004 Table of Contents Section 1: Software Requirements & Package Contents... 2 Section 2: DocSTAR
Copyright 2009 by Scholastic Inc. All rights reserved. Published by Scholastic Inc. PDF0090 (PDF)
Enterprise Edition Version 1.9 System Requirements and Technology Overview The Scholastic Achievement Manager (SAM) is the learning management system and technology platform for all Scholastic Enterprise
MYOB Enterprise Solutions System Requirement Guidelines. Wednesday 21 st March 2012 Version 2.6
Wednesday 21 st March 2012 Version 2.6 Contents 1 SYSTEM REQUIREMENTS... 4 1.1 OVERVIEW... 4 1.2 SERVER REQUIREMENTS... 4 1.2.1 SERVER REQUIREMENTS (EXCLUDING TERMINAL SERVER)... 4 1.2.2 WINDOWS TERMINAL
Installation Guidelines Ujjwala KYC Offline Application. By:
Installation Guidelines Ujjwala KYC Offline Application By: Table of Contents 1. Introduction... 3 About Ujjwala KYC Offline Application... 3 About this Document... 3 2. Ujjwala KYC Offline Application
QUICKBOOKS PRO 2009 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES
QUICKBOOKS PRO 2009 INSTALLING QUICKBOOKS PRO AND STUDENT DATA FILES Installing QuickBooks Pro 2009 Software Before installing the software, verify that your computer meets the following minimum system
Cannot Remove Service Pack 1 Windows 7 Full
Cannot Remove Service Pack 1 Windows 7 Full Version Cannot remove RollAround - posted in Resolved HijackThis Logs: I turned on the computer this afternoon OS version: 6.1.7601 Windows 7 Service Pack 1
F-Secure Client Security. Quick Installation Guide
F-Secure Client Security Quick Installation Guide F-Secure Client Security TOC 3 Contents Chapter 1: Introduction...5 Chapter 2: Installing Client Security...7 System requirements...8 Stand-alone installation...9
Intelligent Security & Fire Ltd
This document describes the standard software installation process for Doors.NET software. There are three steps to software installation: install the software, activate the license, enable the communication
Breeze 2 Installation and Configuration Guide
Breeze 2 Installation and Configuration Guide 715001951/Revision B Copyright Waters Corporation 2008 2009 All rights reserved Copyright notice 2008 2009 WATERS CORPORATION. PRINTED IN THE UNITED STATES
Installation Guide CONTROL MICROSYSTEMS
Installation Guide CONTROL MICROSYSTEMS 48 Steacie Drive n Kanata, Ontario Canada K2K 2A9 Telephone: 613-591-1943 n Facsimile: 613-591-1022 Technical Support: 888-226-6876 (888-2CONTROL) ClearSCADA Getting
Avigilon Control Center Virtual Matrix User Guide
Avigilon Control Center Virtual Matrix User Guide Version 5.2 PDF-ACCVM-B-Rev1 2013-2014 Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with respect
Installing MachineShop... 2
Table of Contents Installing MachineShop.................. 2 System Requirements.................... 2 Installing the MachineShop Suite........... 4 Installing Network Communication Software.. 5 Installing
GALILEOS SITE SURVEY FORM
Version 6.1 GALILEOS SITE SURVEY FORM To make sure that your planned installation of the Sirona GALILEOS system progresses as smoothly as possible with no delays, we ask you to fill out the following pages
Faxing within McKesson Lytec MD using Zetafax
Faxing within McKesson Lytec MD using Zetafax Zetafax 2007 (Version 11) and Zetafax 2009 (Version 12.5) is an integrated part of Lytec MD. Zetafax 2007 is certified for Lytec MD and Zetafax 2009 is certified
A Guide to Installing OLI Software
A Guide to Installing OLI Software OLI Systems delivers a comprehensive suite of tools designed to help you analyze complex aqueous and multi-solvent electrolyte solution chemistry, thermo-physical properties,
GIFTePay XML. SecurePay. Installation & Configuration Guide. Version Part Number: (ML) (SL)
GIFTePay XML Installation & Configuration Guide SecurePay Version 4.00 Part Number: 8662.82 (ML) 8662.83 (SL) GIFTePay XML Installation & Configuration Guide Copyright 2009 Datacap Systems Inc. All rights
Mailbox Manager Getting Started Guide. Licensing Installation Options System Requirements Installation Instructions
Mailbox Manager Getting Started Guide Licensing Installation Options System Requirements Installation Instructions Mailbox Manager Release 5.4 December 2006 Table of Contents Introduction... 1 Licenses...
MINIMUM HARDWARE AND OS SPECIFICATIONS File Stream Document Management Software - System Requirements for V4.2
MINIMUM HARDWARE AND OS SPECIFICATIONS File Stream Document Management Software - System Requirements for V4.2 NB: please read this page carefully, as it contains 4 separate specifications for a Workstation
2015 Computerized Assessments and Learning, LLC 8/20/2015. Installation Guide
2015 Computerized Assessments and Learning, LLC 8/20/2015 Installation Guide Table of Contents Table of Contents... 2 About This Guide... 3 Minimum Requirements for Testing Devices... 3 System Requirements...
Manual Internet Explorer 9 For Vista 32 Bit. English >>>CLICK HERE<<<
Manual Internet Explorer 9 For Vista 32 Bit English Dec 12, 2014. Installed Vista SP1 32 bit from DEll's own reinstallation disc OK. Then did manual install of SP2 then accepted ALL the offered windows
Agilent OpenLAB Chromatography Data System (CDS)
Agilent OpenLAB Chromatography Data System (CDS) Hardware and Software Requirements Agilent Technologies Notices Agilent Technologies, Inc. 2013-2014 No part of this manual may be reproduced in any form
Customers should provide all necessary operating supplies upon request of the engineer.
OpenLAB Installation Data Checklist Analysis Only A.01.01 Thank you for purchasing an Agilent software solution. This checklist is used by the installing engineer to ensure that the instrument and associated
Centrix WorkSpace Discovery Installation Guide. Version 1.0
Centrix WorkSpace Discovery Installation Guide Version 1.0 The latest software version and documentation for this product can be downloaded here: http://www.centrixsoftware.com/downloads/discovery If you
PrintShop Mail Web. Getting Started
PrintShop Mail Web Getting Started Copyright Information Copyright 1994-2010 Objectif Lune Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a
1 Act! Premium v17 System Requirements
1 Act! Premium v17 All minimum system requirements are based on a single-user environment (one computer accessing a local database). In a shared environment, Act! Pro is designed to work with up to 10
IBM SPSS Text Analytics for Surveys
Software Product Compatibility Reports Product IBM SPSS Text Analytics for Surveys 4.0.1.0 Contents Included in this report Operating systems Hypervisors (No hypervisors specified for this product) Prerequisites
Installing Lotus Notes on Your Computer Lotus Notes release (Standard and Basic versions)
Installing Lotus Notes on Your Computer Lotus Notes release 8.0.1 (Standard and Basic versions) You can install Lotus Notes on your PC just as you would install any other software. You may download the
This document describes the standard software installation process for Doors.NET software.
Doors.NET installation and controller configuration is a three step process. Each of these steps has its own document, with controller configuration broken into separate documents per hardware type. software
PPC s SMART Practice Aids Prepare for Installing database upgrade to SQL Express 2008 R2
PPC s SMART Practice Aids Prepare for Installing database upgrade to SQL Express 2008 R2 June 2013 Agenda Objectives SMART Practice Aids System Requirements SMART Installation Pre-Requisites Installation
Pension System/Windows. Installation Guide
Pension System/Windows Installation Guide Updated for Microsoft SQL Server 2008 R2 & MS SQL Express DATAIR Employee Benefit Systems, Inc. 735 N. Cass Ave. Westmont, IL 60559-1100 V: (630) 325-2600 F: (630)
Metasys for Validated Environments (MVE) Installation and Platform Requirements
Issue Date 2/7/03 TECHNICAL BULLETIN Metasys for Validated Environments (MVE) Installation and Platform Requirements Metasys for Validated Environments (MVE) Installation and Platform Requirements...2
Manual Do Windows Vista Home Premium 32 Bit
Manual Do Windows Vista Home Premium 32 Bit Iso 913d2 driver Microsoft windows vista home premium - cnet. How to download a vista iso and create an installation dvd or usb information (x86) and 64 bit
Sage ERP Accpac. Compatibility Guide Version 6.0. Revised: November 18, 2010
Sage ERP Accpac Compatibility Guide Version 6.0 Revised: November 18, 2010 Contents Overview... 1 Version 6.0 Compatibility... 2 All Environments... 2 Virtual Environments... 3 Additional Notes... 3 Citrix
Book Xpress Quick Startup Guide
Book Xpress Installation Windows 1) Insert the installation DVD and click on Note: System requirements: Pentium 4, 2.8 GHz Processor and above 1 GB RAM + 1 GB free disk space CD/DVD- ROM drive Microsoft
System Requirements Installation Desktop installation Activating your Amtech software Amtech 2014 Upgrade...
Amtech 2014 Quick Guide Contents System Requirements... 4 Installation... 5 Desktop installation... 5 Activating your Amtech software... 7 Amtech 2014 Upgrade... 10 Amtech FastTest... 10 Automatic Updates...
Kodak Capture Software Installation Guide
Kodak Capture Software Installation Guide Introduction System requirements Software Kodak Capture Software is a software application that enables all functions of the following scanners, both simplex and
Version 9 is a major update offering faster optimisation, quick and easy navigation and a new dashboard.
V9.0 NEW FEATURES Version 9 is a major update offering faster optimisation, quick and easy navigation and a new dashboard. The key improvements are: Faster optimisation with multiple core processors New
WA1735 Java Persistence (JPA) Programming using Rational Application Developer 7.5. Classroom Setup Guide. Web Age Solutions Inc.
WA1735 Java Persistence (JPA) Programming using Rational Application Developer 7.5 Classroom Setup Guide Web Age Solutions Inc. Copyright 2012 Web Age Solutions Inc. 1 Table of Contents Part 1 - Minimum
Technical Information Field Data Manager Software MS20 / MS21
TI01022R/09/EN/06.17 71356247 Products Solutions Services Technical Information Field Data Manager Software MS20 / MS21 PC analysis software for data management and visualization Application Automatic
Sage ERP Accpac. Compatibility Guide Version 6.0. Revised: February 2, Version 6.0 Compatibility Guide
Sage ERP Accpac Compatibility Guide Version 6.0 Revised: February 2, 2012 Version 6.0 Compatibility Guide i Contents Overview... 1 Version 6.0 Compatibility... 2 All Environments... 2 Virtual Environments...