Purpose of Procedure. Customer Responsibilities. Important Customer Information. OpenLAB Data Store Server A Site Preparation Checklist

Transcription

1 OpenLAB Site Preparation Data Store Checklist Server A Purpose of Procedure To assure the installation of the OpenLAB Data Store Server can be completed successfully by careful preparation and evaluation of the installation site and by meeting or exceeding minimum requirements as outlined in this Site Prep Checklist. Correct site preparation is the key first step in ensuring that your instruments and software systems operate reliably over an extended lifetime. This document is an information guide AND checklist prepared for you that outlines the computing requirements for your site. It may also recommend tools where needed, that will help you get started. For additional information, please visit our web site at Customer Responsibilities Make sure your site meets the following specifications prior the installation date. Your site meets the software, hardware and networking specifications as outlined below Computing environment and the necessary space is made available The number and location of electrical outlets and network ports for your computer systems, peripherals and instruments are planned. Locate your sales order information such as software authorization codes, software licenses or software certificates. The necessary software media, disks etc. are available including upgrade or update disks A suitable backup solution is identified for your software. A system or network administrator is available as needed to connect to your intranet. Complete Final Check: Software Site Preparation Tool. Please visit the following Agilent website to download the Software Installation Site Preparation Tool: PrepTool.aspx This easy- to- use tool verifies that your PC meets the necessary hardware and software pre- requisites before installing the Agilent software. If Agilent is delivering installation and familiarization services, users of the instrument should be present throughout these services; otherwise, they will miss important operational, maintenance and safety information. Important Customer Information 1 If you have questions or problems in providing anything described as Customer Responsibilities above, please contact your local Agilent or partner support/service organization for assistance prior to delivery. In addition, Agilent and/or its partners reserve the right to reschedule the installation dependent upon the readiness of your laboratory. 2 Should your site not be ready for whatever reasons, please contact Agilent as soon as possible to re- arrange any services that have been purchased. 3 Other optional services such as additional training, operational qualification (OQ) and consultation for user- specific applications may also be provided at the time of installation when ordered with the system, but should be contracted separately. Page 1 of 5

2 Data Store Server - Hardware Specifications Agilent OpenLAB Components Supported Component OpenLAB Data Store OpenLAB CDS Agilent OpenLAB CDS Operating System Database Supported A A ChemStation Edition C EZChrom Edition A Server: Microsoft Windows 2008 R2 (64-bit) SP1 SQL Server 2008 R2 SP1 Server Hardware Requirements Component Processor type & speed Low End Labs with up to five instruments running concurrently. This configuration can store up to 300 gigabytes (GB) of data, which is sufficient for three to five years of normal use for five LC or GC instruments. 2 x (Intel Xeon 2.0 GHz 4 Core) or 1 x (Intel Xeon 3.0 GHz 6 Core) High End Memory 8 GB (8192 MB) 12 GB Labs with up to fifteen instruments running concurrently. This configuration can store up to one terabyte (TB) of data, which is sufficient for three to five years of normal use for fifteen LC or GC instruments. 2 x (Intel Xeon 3.0 GHz 4 Core) DISK OS, db, Indexes 2 x (150 GB 7.2K rpm SATA) RAID 1 2 x (250 GB 15K rpm SCSI) RAID 1 DISK Data 3 x (150 GB 7.2K rpm SATA) RAID 5 3 x (500 GB 7.2K rpm SATA) RAID 5 Monitor/Graphics Adapter SVGA or better x768 min. res. SVGA or better x768 min. res. Network Adapter 1 GB 1 GB Page 2 of 5

3 Client Software Requirements and Compatibility Component Supported Comment Operating System Microsoft Windows 7 Professional or Enterprise x64 (64 bits) SP1 or above Microsoft Windows 7 Professional or Enterprise x86 (32 bits) SP1 or above Microsoft Windows XP Professional x86 (32 bits) SP3 Microsoft Windows 7 Ultimate (32 bit and 64 bit) Microsoft Windows 7 SP1 Ultimate (32 bit and 64 bit) JRE (Java Runtime Environment) Web Browser Java Sun JRE 1.7.0_11 32 bits Internet Explorer bits Internet Explorer bits Not compatible with IE 9 64 bits. Internet Explorer 8 only supported with Microsoft Windows XP. PDF Reader Adobe Reader X 10.x (x >= 1) Adobe Reader is required Microsoft Office Adobe Flash Microsoft Office 2010 SP1 (or above) Professional, Professional Academic, Professional Plus Microsoft Office 2007 SP2 (or above) Professional, Professional Plus, Enterprise, Ultimate Adobe Flash Payer 11.4 and up for Internet Explorer Lab Applications can work without Office installed but search result exports are provided in Microsoft Excel format. OpenLAB Data Store web interface can work without this component. Installing flash provides additional ease of use while uploading files and provides enhanced preview. Centralized File Storage: OpenLAB CDS Networked and Distributed EZChrom Systems support a centralized shared location for the storage and retrieval of Laboratory Files (i.e - Data, Methods, Sequences, Results, Report Templates, etc.). The volume where the share will reside should be sized appropriately to support the files being generated from the Workstations and AIC s. Typical File Sizes are as follows: ~0.4 MB for 60 min. of 2D Data ~150 MB for 60 min. of 3D Data collecting UV Resolution from nm Page 3 of 5

4 Server Software Requirements: Specification Description Supported Operating System (OS): Windows Server 2008 R2 with SP1 (64-bit) Install Microsoft Hotfix for KB and KB Obtain from Support.Microsoft.com The following localized versions of Windows operating systems may be used: English Chinese (Non-localized instrument drivers are supported and will always appear in English) Japanese (Non-localized instrument drivers are supported and will always appear in English) NOTE The server operating system for OpenLAB Data Store, must be installed with the one of the languages English, Chinese or Japanese and the corresponding time and currency format must be selected. OS.NET & other Add-ins:.NET 3.5 SP1 (Installed by master installer launch if needed) Windows Installer 4.5 (Installed automatically by master installer if needed) Use Internet Explorer 9 Connect the Data Store Server Drives: Network: Privileges: Printing: IP Address: Virtualization: Citrix: Terminal Services: to the Domain (name resolution required for networked systems) NTFS Files system (2 Drives needed for best performance) TCP/IP Protocol version 4 only; TCPv6 addressing is not supported by OpenLAB CDS, Client for Microsoft Networks, File and Printer Sharing for Microsoft Networks. Domain controller hosting the domain connected to by networked system must have a Windows 2003 server operating system or newer. Windows 2000 and previous operating systems will not allow proper operation of a networked CDS system. See OpenLAB CDS Network Requirements guide for detailed specifications During installation a user with Local Administrator permissions is required for installation and configuration of the Data Store Server software. This allows the installer to grant appropriate windows firewall permissions on the correct network profile for successful system operation. Check that a valid Printer Driver is installed on the system and a Test Page prints successfully Static or DHCP Reservation only Virtualization of Data Store Server is not recommended Not supported for use with Data Store Not supported for use with Data Store Page 4 of 5

5 Database: NOTE For performance reasons, it is highly recommended that database files and any transaction logs are stored on physically exclusive hard drives. Agilent OpenLAB CDS Data Store Servers manage information using a database. When deploying networked system configurations this database may require additional installation in order to ensure acceptable performance of the system. The following database software is supported for hosting shared services databases: SQL Server 2008 R2 Standard or Enterprise with SP1 (64- bit) Windows/SQL Mixed Mode Authentication Service Logons must be a user that can access the Domain SQL Server Reporting Services should not be installed as it will conflict with Tomcat Services The use of SQL scripting for SQL based systems is not supported Licensing Agilent OpenLAB CDS supports the use of a central licensing server for the distribution and tracking of license entitlements. The following software is supported for hosting central licensing services: Flex- Net Publisher v This software is installed with the installation of a shared services server. A single server may be used to host licenses for multiple systems in the same network domain. Important Customer Web Links Agilent Customer Web Links For additional information about our solutions, please visit our web site at How to get information on your product: Literature Library - Need to know more? - Need technical support, FAQs? - Need supplies? - Software Status bulletins, patches, drivers, software utilities - OpenLAB CDS Software Updates - agilent.subscribenet.com Other important web links Microsoft Hardware Compatibility Lists Links to specific O/S fixes, updates needed Page 5 of 5