UltraNetCam3 HSPI User s Guide
|
|
- Marcia Osborne
- 5 years ago
- Views:
Transcription
1 UltraNetCam3 HSPI User s Guide A HomeSeer HS3 plug-in used to capture snapshots from network cameras for surveillance and security purposes. Copyright 2014 ultrajones@hotmail.com Revised 12/21/2014 This document contains proprietary and copyrighted information and may not be copied, reproduced, translated, or reduced to any electronic medium without prior consent, in writing, from ultrajones@hotmail.com.
2 Table of Contents Introduction... 5 Intended Audience... 5 UltraNetCam3 HSPI Overview... 5 How It Works... 5 Features... 5 Requirements... 6 UltraNetCam3 HSPI Installation... 6 Downloading the HomeSeer Plug-in... 6 UltraNetCam3 HSPI Configuration... 6 Web Page Layout... 6 Screenshot... 6 Options... 7 NetCam Options Notification Options... 7 Archive Options... 7 FTP Archive Options... 7 Snapshot Event to Video Options... 8 Web Page Access... 8 Application Options... 8 NetCam Types... 8 Screenshot... 8 Adding a New NetCam Type... 9 Modifying an Existing NetCam Type... 9 Deleting an Existing NetCam Type... 9 NetCam Controls... 9 Screenshot Adding a New NetCam Control Modifying an Existing Control Deleting an Existing Control
3 Deleting All Controls for a NetCam Type NetCam Controls - Import Screenshot Importing Controls Importing File Format NetCam Controls - Export Screenshot Exporting Controls NetCam Devices Screenshot Adding a New NetCam Device Modifying an NetCam Device Deleting an Existing NetCam Device Testing an Existing NetCam Device UltraNetCam3 HomeSeer Devices UltraNetCam3 Device Types Screenshot Screenshot UltraNetCam3 HSPI Snapshots Viewing Snapshots Screenshot UltraNetCam3 HSPI Cameras Viewing the Last Camera Snapshot Screenshot UltraNetCam3 HSPI Triggers UltraNetCam3 Alarm Trigger UltraNetCam3 HSPI Trigger Actions UltraNetCam3 Event Snapshots Action Properties Screenshot UltraNetCam3 Take Snapshot Action Properties
4 Screenshot UltraNetCam3 CGI Action Properties Screenshot UltraNetCam3 Purge Snapshot Action Properties Screenshot UltraNetCam3 HSPI Trigger Conditions UltraNetCam3 HSPI API Reference
5 Introduction UltraNetCam3 is a HomeSeer HS3 plug-in used to capture snapshots from network cameras installed in your home for surveillance and security purposes. UltraNetCam3 supports taking simultaneous snapshots from your network cameras and provides the ability to archive the snapshots locally or off site to an FTP repository or sending notifications containing the last snapshot, or a compressed attachment of the snapshots or an MP4 video of the snapshots. Intended Audience This document is intended for the HomeSeer user that has chosen to install and configure the UltraNetCam3 HomeSeer Plug-in. UltraNetCam3 HSPI Overview How It Works UltraNetCam3 HSPI connects to your network cameras using the HTTP protocol and captures a series of snapshots (still images) in response to an external trigger (motion sensor, door opening, etc.) to create a snapshot event. The snapshot event can be viewed using HomeSeer and can be sent by or archived locally or to an FTP repository. Features Multiple threading allows UltraNetCam3 HSPI to take simultaneous snapshots from your network cameras without disrupting the performance of HomeSeer. Supports multiple network cameras (limited by your HomeSeer hardware). An Event Snapshot Action supports taking from 1 to n snapshots with x seconds between each snapshot. In addition, you can send an notification, compress event snapshots and upload the compressed file to a local file system or remote FTP server. A Take Snapshot Action allows you to refresh the last snapshot and thumbnail image. A CGI Command Action allows you to run a command supported by your network camera (e.g. go to preset n and wait x seconds for command to complete). Automatically convert a snapshot event to MP4 video if snapshot count exceeds a set threshold. A Purge Snapshots Action allows you to purge snapshots (or all but the last n events) for the selected network camera. Snapshot events are automatically purged from the FTP archive directory based on a predefined FTP archive threshold. Foscam motion alarm trigger supported by select Foscam network cameras. A network camera View webpage that displays the last snapshot for each network camera. A Snapshot webpage that displays the event snapshot by camera and event number. User ID and password are not sent as part of the URL query string (unless required by the network camera). 5
6 Error Try/Catch logic to ensure plug-in doesn't fail with an unhandled exception. Requirements Homeseer 3.0 or greater One or more IP network cameras that support JPEG snapshots. UltraNetCam3 HSPI Installation Downloading the HomeSeer Plug-in 1. From your HomeSeer web page, select PLUG-INS > Manage. 2. Click the + icon next to Additional Interfaces to expand the list of available HomSeer3 plug-ins. 3. Click the + icon next to the Camera Support category, then click the checkbox next to the UltraNetCam3 (Network Camera) package to mark the plug-in for installation. 4. Under Pending Updates/Installs, click the Download and Install button. 5. Once the installer finishes, find the UltraNetCam3 plug-in under Installed Plug-Ins, then enable it. UltraNetCam3 HSPI Configuration Web Page Layout The UltraNetCam3 plug-in has 6 web pages that provide access to the available features of the plug-in. Screenshot The available web pages are as follows: 1. Status Displays the plug-in and the network camera status. 2. Options Displays and allows you to change the options associated with the plug-in. 3. NetCam Types Provides the ability to define the types of network cameras you have installed in your home. 6
7 4. NetCam Controls Displays and allows you to add, modify and delete network camera controls. You can also import and export controls. 5. NetCam Devices Displays and allows you to add, modify, delete and test network camera devices installed in your home. 6. Event Snapshots Provides the ability view and delete snapshot events. The snapshots are arranged by camera and date. 7. Latest Snapshots Provides the ability to display and refresh the latest snapshot from each network camera. Options All options are set from the Options web page. The following options are supported: NetCam Options Maximum Snapshot Events per Camera The maximum number of snapshots to keep per camera. The default is 50. Snapshots Per Page The default number of snapshots to display on the Snapshots web page. Snapshot Max Width The maximum width of the snapshots to display on the Snapshots web page. Snapshot Refresh Interval Specify how often the plug-in should refresh the camera snapshots. The default is disabled. Notification Options Notification Enable sending Snapshot Event notifications using the plug-in. To The default notification recipient address. From The default notification sender address. Subject The default notification subject. Body Template The default notification message body. Archive Options Archive Events Enable archiving Snapshot Events to local archive. Archive Directory Limit - The maximum size of all archived snapshot events to be stored in the archive directory. Archive Files Specifies the types of files to archive. Archive Directory The absolute path to the archive directory (e.g. c:\localdir or \\HostnameOrIPAddress\SharedFolder). FTP Archive Options Archive Events Enable archiving Snapshot Events to FTP archive. Archive Limit - The maximum size of all archived snapshot events to be stored in the archive directory. Archive Files Specifies the types of files to archive. Archive Directory The directory on the FTP archive to store the snapshot events. FTP Server Name The fully qualified domain name or IP address of the FTP server. 7
8 FTP User Name The FTP user name. FTP Password The FTP user password. Snapshot Event to Video Options FFmpeg Status The status indicating if the FFmpeg 3 rd party program is installed. This program is required to convert snapshots to MP4 video. Convert Snapshot Event to Video Snapshots will automatically be converted to an MP4 video if the number of snapshots exceeds this value. Web Page Access Authorized User Roles Specify the HomeSeer users authorized to access the UltraNetCam3 web page. Application Options Logging Level Select the level of application logging. Note: This option may produce a lot of output and should only be used when debugging. NetCam Types The NetCam Types web page allows you to add, modify and delete the types of network cameras you have installed in your home. A NetCam Type entry contains the vendor, model, snapshot path and video stream path. If your cameras do not have a video stream path, then simply reenter the snapshot path in this field. Before you begin to create the network camera devices, you ll need to review either the network camera user manual or obtain the application program interface (API) documentation from the network camera vendor. Screenshot 8
9 Adding a New NetCam Type 1. Click on the UltraNetCam3 > NetCam Types > New button. 2. Enter the NetCam Vendor name. 3. Enter the NetCam Model or Type (e.g. JPEG, H.264 or FI9820W). 4. Enter the path to the snapshot path (e.g. /snapshot.cgi) 5. Enter the path to the video stream (e.g. /videostream.cgi). Note: If your camera does not have a video stream path, then reenter the snapshot path in this field or keep the default value. 6. To add the NetCam Type, simply click on Create button. 7. To cancel, simply click the X icon in the upper right corner. Modifying an Existing NetCam Type 1. Click on the UltraNetCam3 > NetCam Types tab. 2. Find the NetCam Type you want to edit, and then click the Edit link. 3. Edit the values as needed, then press the Update button. 4. To cancel the changes, simply click the X icon in the upper right corner. Deleting an Existing NetCam Type 1. Click on the UltraNetCam3 > NetCam Types tab. 2. Find the NetCam Type you want to delete, and then click the Delete link. 3. Confirm you want to delete the NetCam Type by clicking the Delete button. 4. To cancel, simply click the X icon in the upper right corner. NetCam Controls The NetCam Controls web page allows you to add, modify and delete controls associated with the selected NetCam Type. NetCam Controls allow you to control your NetCam using HomeSeer device actions. Before you begin to create the network camera controls, you ll need to review either the network camera user manual or obtain the application program interface (API) documentation from the network camera vendor. 9
10 Screenshot Adding a New NetCam Control 1. Click on the UltraNetCam3 > NetCam Controls tab. 2. Select the Network Camera Type from the drop-down list. 3. Click the New button near the the upper left corner. 4. Enter the Control Name and Control URL into the text boxes provided, and then press the Create button. 5. To cancel, simply click the X icon in the upper right corner. Modifying an Existing Control 1. Click on the UltraNetCam3 > NetCam Controls tab. 2. Select the NetCam Type from the drop-down list. 3. Find the Control Name you want to edit, and then click the Edit link. 4. Edit the Control Name and/or the Control URL, then press the Update button. 5. To cancel the changes, simply click the X icon in the upper right corner. Deleting an Existing Control 1. Click on the UltraNetCam3 > NetCam Controls tab. 2. Select the NetCam Type from the drop-down list. 3. Find the Control Name you want to delete, and then click the Delete link. 4. Confirm you want to delete the control by clicking the Delete button. 5. To cancel, simply click the X icon in the upper right corner. Deleting All Controls for a NetCam Type 1. Click on the UltraNetCam3 > Controls button. 2. Select the NetCam Type from the drop-down list, and then click the Delete all NetCam Controls for the selected device. 3. Click the Update button to delete all the Controls for the selected device. NetCam Controls - Import The Import web page allows you to import NetCam controls exported by another user. 10
11 Screenshot Importing Controls 1. Click on the UltraNetCam3 > Controls button. 2. Select the NetCam Type from the drop-down list, and then press the Update button. 3. Click the Browse button to find the file you want to import. 4. Click the Upload button to import the NetCam Controls. Importing File Format When importing Controls into UltraNetCam3 HSPI, please using the following file format: [Control Name] /path-to-action.extenstion?parm1=value1&parm2=value2 Example # Comment [Move Up - Start] /decoder_control.cgi?command=0 [Move Up - Stop] /decoder_control.cgi?command=1 [Move Down - Start] /decoder_control.cgi?command=2 [Move Down - Stop] /decoder_control.cgi?command=3 [Move Left - Start] /decoder_control.cgi?command=4 [Move Left - Stop] /decoder_control.cgi?command=5 [Move Right - Start] /decoder_control.cgi?command=6 [Move Right - Stop] /decoder_control.cgi?command=7 NetCam Controls - Export The Export web page allows you to export the controls for archive purposes. Screenshot Exporting Controls 1. Click on the UltraNetCam3 > Controls button. 2. Select the NetCam Type from the drop-down list, and then press the Export File button. 3. Save the file to your local hard drive. NetCam Devices The NetCam Devices web page allows you to add, modify and delete the network cameras you have installed in your home. A NetCam Device entry contains the network camera name, IP address, TCP port, camera type and the credentials needed to log into the cameras interface. 11
12 Screenshot Adding a New NetCam Device 1. Click on the UltraNetCam3 > NetCam Devices tab. 2. Click the New button near the upper left corner of the web page. 3. Enter the NetCam name (e.g. Basement, outside, etc.). 4. Enter the NetCam IP address (e.g ). 5. Enter the NetCam TCP port number (e.g. 80). 6. Select the NetCam type. If the type is not available, you need to add a new type using UltraNetCam3 > NetCam Types. 7. Enter the NetCam User Id and User Password in the fields provided. 8. To add the NetCam Device, simply click on the Create button. 9. To cancel, simply click the X icon in the upper right corner. Modifying an NetCam Device 1. Click on the UltraNetCam3 > NetCam Devices tab. 2. Find the NetCam Device you want to edit, and then click the Edit link. 3. Edit the values as needed, then click the Update button. 4. To cancel the changes, simply click the X icon in the upper right corner. Deleting an Existing NetCam Device 1. Click on the UltraNetCam3 > NetCam Devices tab. 2. Find the NetCam Device you want to delete, and then click the Delete link. 3. Confirm you want to delete the NetCam Device by clicking the Delete button. 4. To cancel, simply click the X icon in the upper right corner. 12
13 Testing an Existing NetCam Device 1. Click on the UltraNetCam3 > NetCam Devices tab. 2. Find the NetCam Device you want to test, and then click the Snapshot Test icon Note: The Snapshot Test attempts to take a snapshot from your camera. Any errors are written to the HomeSeer log. UltraNetCam3 HomeSeer Devices The UltraNetCam3 plug-in automatically creates a HomeSeer device for each NetCam you define within the plug-in. The Controls are automatically updated for every NetCam associated with a particular NetCam Type. UltraNetCam3 Device Types This device is automatically created for each NetCam you define. To control your NetCam, simply selecting the HomeSeer Control dropdown and selecting an appropriate action. Screenshot You can also control your NetCam by selecting a Device Action, then selecting Device, then Device Action. See UltraNetCam3 > Controls for setting up custom controls for your NetCam type. 13
14 Screenshot UltraNetCam3 HSPI Snapshots The Snapshots web page allows you to view the snapshot events by network camera and snapshot event. Viewing Snapshots 1. Click on the UltraNetCam3 > Snapshots button. 2. Select the network camera from the list and optionally select the snapshot event you want to view. 3. Select the desired page size and the navigational controls to find the desired snapshot. You can view the original size of any snapshot by clicking on the image. You can also view the other snapshot associated with the event by clicking the right or left side of the larger image. 14
15 Screenshot UltraNetCam3 HSPI Cameras The Latest Snapshots web page allows you to view the most resent snapshot from your network cameras. The refresh internal can be changed from UltraNetCam3 > Options web page. Viewing the Last Camera Snapshot 1. Click on the UltraNetCam3 > Latest Snapshots tab. 2. Scroll though the list of snapshots from each network camera. 15
16 Screenshot UltraNetCam3 HSPI Triggers You can create HomeSeer events using any of the supported triggers below. UltraNetCam3 Alarm Trigger This trigger can be used to run a HomeSeer event whenever a Foscam camera detects motion. This may be useful if you do not have an external trigger to determine when you need to capture snapshots from your network cameras (e.g. External motion sensors, door sensors, etc.). Enabling the Foscam Alarm Trigger Hidden Feature You can enable the alarm trigger on the Foscam JPEG camera as follows: IP address}:{port}/set_alarm.cgi?http=1&http_url= Address of HomeSeer}/UltraNetCam3?trigger=alarm&user=admin&pwd=password Note: The user and pwd in the URL above is for the Foscam Camera and not HomeSeer. Once the command above had been sent, you can enable/disable the feature using the following commands: IP address}:{port}/set_alarm.cgi?http=1&user=admin&pwd=password IP address}:{port}/set_alarm.cgi?http=0&user=admin&pwd=password Note: You can use the UltraNetCam3 CGI HomeSeer event action to automate enabling and disabling the alarm notification trigger. To trigger a HomeSeer event when motion is detected by your network camera, select "UltraNetCam3 Alarm Trigger", and then select the Camera that will trigger the event. 16
17 UltraNetCam3 HSPI Trigger Actions UltraNetCam3 Event Snapshots This action causes the plug-in to capture a series of snapshots from your network camera. Action Properties Action Properly Name Select Action Select Network Camera Number of Snapshots Delay between Snapshots Notification Recipient Notification Attachment Options Action Property Description Event Snapshots The network camera you want to capture snapshots from. A numeric value specifying the number of snapshots you want to capture as part of the snapshot event. The recommended maximum value is 60. A numeric value containing the number of seconds to pause between snapshots. The recommended value is between 0 and 1 second (e.g..25). An alternate address for the notification (if different than the default specified in the options web page). Select the type of attachment you want to attach to the notification. Valid options are: 1. Do not include an attachment 2. Attach the latest snapshot of the event 3. Attach the compressed file of the event 4. Attach the MP4 video of the event Send Notification Compress Event Snapshots Upload Compressed File to FTP Server Archive Event Select this checkbox to have an notification sent at the completion of the event. Select this checkbox to have the snapshot events compressed. Select this checkbox to copy the compressed snapshot event to the selected FTP archive. See UltraNetCam3 > Options for FTP Archive options. This option will allow UltraNetCam3 to save the video or compressed snapshot event to an alternate location within your network. 17
18 Screenshot UltraNetCam3 Take Snapshot This action causes the plug-in to capture a single snapshot from your network camera. The snapshot can be viewed from UltraNetCam3 > Cameras or viewed from the camera s root snapshot folder. Action Properties Action Properly Name Select Action Select Network Camera Action Property Description Take Snapshot The network camera you want to capture the snapshot from. Screenshot 18
19 UltraNetCam3 CGI This action provides additional control of your network cameras. As an example, if your camera provides pan and tilt features, you can move your camera to a certain presets prior to capturing snapshots from your camera. Action Properties Action Properly Name Select Action Select Network Camera Query String Wait for Command to Complete Action Property Description NetCam CGI The network camera you want to send a command to. The URL for the command to run. The number of seconds to wait for the command to complete. As an example, if you configure this event to move your camera to preset 1, then you may need to wait several seconds for your camera to complete the request. Screenshot UltraNetCam3 Purge Snapshot This action allows you to purge snapshot events for a specific camera. The plug-in also automatically purges snapshot events from all cameras based on the value you specify in UltraNetCam3 > Options > Maximum Snapshots Events per Camera. Action Properties Action Properly Name Select Action Select Network Camera Number of Snapshot Events to Keep Action Property Description Purge Snapshot The network camera you want to capture the snapshot from. The number of snapshots to keep for the selected camera. 19
20 Screenshot UltraNetCam3 HSPI Trigger Conditions This plug-in does not have any HomeSeer trigger conditions defined. UltraNetCam3 HSPI API Reference To be determined 20
UltraNetCam HSPI User s Guide A HomeSeer HS2 plug-in used to capture snapshots from network cameras for surveillance and security purposes.
UltraNetCam HSPI User s Guide A HomeSeer HS2 plug-in used to capture snapshots from network cameras for surveillance and security purposes. Copyright 2013 ultrajones@hotmail.com Revised 02/03/2013 This
More informationUltraNetatmo3 HSPI User s Guide A HomeSeer HS3 plug-in to connect to the Netatmo Urban Weather Station.
UltraNetatmo3 HSPI User s Guide A HomeSeer HS3 plug-in to connect to the Netatmo Urban Weather Station. Copyright 2016 ultrajones@hotmail.com Revised 04/19/2016 This document contains proprietary and copyrighted
More informationUltraHTDAudio3 HSPI User s Guide A HomeSeer HS3 plug-in to control the Home Theater Direct (HTD) Whole-House Audio System.
UltraHTDAudio3 HSPI User s Guide A HomeSeer HS3 plug-in to control the Home Theater Direct (HTD) Whole-House Audio System. Copyright 2016 ultrajones@hotmail.com Revised 08/17/2016 This document contains
More informationUltraLighting3 HSPI User s Guide A HomeSeer HS3 plug-in used to control your LIFX Wi-Fi enabled, multi-colored LED lights.
UltraLighting3 HSPI User s Guide A HomeSeer HS3 plug-in used to control your LIFX Wi-Fi enabled, multi-colored LED lights. Copyright 2016 ultrajones@hotmail.com Revised 09/10/2016 This document contains
More informationUltraMon3 HSPI User s Guide A HomeSeer HS3 plug-in to monitor network connected devices
UltraMon3 HSPI User s Guide A HomeSeer HS3 plug-in to monitor network connected devices Copyright 2016 ultrajones@hotmail.com Revised 04/12/2016 This document contains proprietary and copyrighted information
More informationUltraMon HSPI User s Guide A HomeSeer HS2 plug-in to monitor network connected devices
UltraMon HSPI User s Guide A HomeSeer HS2 plug-in to monitor network connected devices Copyright 2012 ultrajones@hotmail.com Revised 12/23/2012 This document contains proprietary and copyrighted information
More informationNVR Management Software
NVR Management Software Quick Installation Guide Ver. 1.0 User Interface Overview 1 Live Video This is the section where the live videos are displayed Menu Bar This is where all functions can be accessed
More informationCentral Management Software. Cam Viewer 3 Lite. User Manual
Central Management Software Cam Viewer 3 Lite User Manual Version 1.0.0 Table of Contents 1. System Requirement...4 2. Software Installation...5 3. Configuration Wizard...9 3.1 Channel...10 3.1.1 Adding
More informationCOMMAND STATION PC SOFTWARE
COMMAND STATION PC SOFTWARE MULTI-SITE MANAGEMENT SOFTWARE USER MANUAL Version 1.6 OpenEye Command Station Software Manual V 1.6 Manual Edition 34863AI - June 2018 2018, OPENEYE All Rights Reserved No
More informationTable of Contents. Product Overview 3 System Requirements 4 Installing MicroView 5 Managing Users & Groups 8
User s Manual Table of Contents Product Overview 3 System Requirements 4 Installing MicroView 5 Managing Users & Groups 8 Add a new user 8 Modify Group Privilege 9 How to Add a new camera 10 Add a new
More informationNS15WG 1080P Web App User Manual
NS15WG 1080P Web App User Manual Table of Contents 1. Getting Started... 4 Download the Web App...4 2. Web App Top Menu... 5 Live Video...6 Video Playback...6 Settings...6 3. Device Configuration... 6
More informationAvigilon Control Center Web Client User Guide
Avigilon Control Center Web Client User Guide Version: 4.12 Standard PDF-WEBCLIENT-S-E-Rev2 Copyright 2013 Avigilon. All rights reserved. The information presented is subject to change without notice.
More informationMilestone Systems Milestone Mobile 2013 (Client)
Milestone Systems Milestone Mobile 2013 (Client) Contents INTRODUCTION... 4 WHAT'S NEW... 4 MILESTONE MOBILE... 6 ABOUT MILESTONE MOBILE CLIENT... 6 ABOUT MILESTONE MOBILE SERVER AND PLUG-INS... 6 ABOUT
More informationOnline Help StruxureWare Data Center Expert
Online Help StruxureWare Data Center Expert Version 7.2.7 What's New in StruxureWare Data Center Expert 7.2.x Learn more about the new features available in the StruxureWare Data Center Expert 7.2.x release.
More informationLENSEC, LLC. PERSPECTIVE VMS. Release Notes (Version 1.2.1) LENSEC, LLC. 8/17/2012
LENSEC, LLC. PERSPECTIVE VMS Release Notes (Version 1.2.1) LENSEC, LLC. 8/17/2012 *Release notes for the Perspective VMS* and Standard Editions CONTENTS 1. Introduction... 2 1.1. Scope... 2 2. System Requirements...
More informationAndroid Mobile Client. User Guide. Version 2.9.1
Android Mobile Client. User Guide Version 2.9.1 1. General information about the Android mobile client..................... 3 2. Connecting to the server and working with servers in the Android client........
More informationMilestone Systems. Milestone Mobile client 2017 R1. User Guide
Milestone Systems Milestone Mobile client 2017 R1 User Guide Contents Get started... 5 About server and client components of Milestone Mobile... 5 Installing Milestone Mobile server components (administrators)...
More informationGuide to Powering Agent Vi Analytics on Milestone s XProtect. savvi 5.3
Guide to Powering Agent Vi Analytics on Milestone s XProtect savvi 5.3 Contents Contents 1 Overview... 2 1.1 About this Guide... 2 1.2 Version Compliance... 2 1.3 Enabling Procedure... 3 2 Specific Installation
More informationLENSEC, LLC. PERSPECTIVE VMS. Release Notes (Version 1.1.0) LENSEC, LLC. 4/20/2012
LENSEC, LLC. PERSPECTIVE VMS Release Notes (Version 1.1.0) LENSEC, LLC. 4/20/2012 *Release notes for the Perspective VMS* and Standard Editions CONTENTS 1. Introduction... 2 1.1. Scope... 2 2. System Requirements...
More informationEASI MP-X Series. User Manual EASI MPR. Workstation. MPR Workstation user manual, , rev003
EASI MP-X Series User Manual EASI MPR Workstation MPR Workstation user manual, 59300234, rev003 Contents MPR Workstation Introduction...1 General...1 Software version...1 Structure of the Network...1 Workstation
More information+ milestone. Milestone Systems. Milestone Mobile client 2017 R3. User Guide
+ milestone Milestone Systems Milestone Mobile client 2017 R3 User Guide Contents Get started... 5 About server and client components of Milestone Mobile... 5 Installing Milestone Mobile server components
More informationMilestone Systems Milestone Mobile 2013 (Server)
Milestone Systems Milestone Mobile 2013 Contents INTRODUCTION... 4 ABOUT MILESTONE MOBILE... 4 PREREQUISITES FOR USING MILESTONE MOBILE... 4 ACCESS XPROTECT WEB CLIENT... 4 SYSTEM REQUIREMENTS... 6 XPROTECT
More informationZivif Security Camera
Zivif Security Camera Quick Installation Guide (RH and RS Series) Support and downloads: www.zivif.com CONNECTION OVERVIEW Wifi / SD onboard storage (supported models only) Wired Camera Router Modem Global
More informationAdministrative Tasks CHAPTER
15 CHAPTER This chapter describes administrative tasks to perform with WCS. These tasks include the following: Running Background Tasks, page 15-2 (such as database cleanup, location server synchronization,
More informationQVR Pro Client 1.2. User Guide
QVR Pro Client 1.2 User Guide Document Version: 4 31/08/2018 Contents 1. Preface Audience...3 Disclaimer... 3 Document Conventions... 3 2. Introduction About QVR Pro Client...4 Key Features and Benefits...
More informationInfinova 2217 Security Management System
Infinova 2217 Security Management System Security Management System - Using Safari browser Client on Macintosh August 2014 Page 1 of 16 Sections 01 Configuring Web Client user in Security Management System
More informationMirasys NVR. User s Guide
Mirasys NVR User s Guide CONTENTS Contents... 2 Before you start... 3 Introduction... 6 Logging in... 9 User interface... 13 Navigator... 16 Cameras... 25 Video outputs... 41 Digital outputs... 46 Digital
More informationTable of Contents Surveillance Center Overview...3 Log...30 Live Camera Panel...31 Live Camera Panel Explained I...32
Surveillance Center Overview...3 Introduction...3 System Requirements... 4 Features... 5 Checking the Hardware Requirements... 6 Installing and Accessing the Module... 8 Connecting a Camera to the Network...
More informationEnterprise Surveillance Manager
4111 Monarch Way Suite 510 Norfolk, VA 23508 p: 877.207.1112 f: 832.201.0342 www.ipconfigure.com About This Document This document describes the features and functions of ipconfigure s Enterprise Surveillance
More informationVideo Monitoring. Contents CHAPTER
CHAPTER 13 This chapter describes how to view live and recorded video streams from security cameras configured in the Cisco Video Surveillance Manager (Cisco VSM) system. Using Cisco PAM, you can associate
More informationGetting Started With Squeeze Server
Getting Started With Squeeze Server & Squeeze Server takes the proven Squeeze encoding engine and makes it available on- premise, in the cloud or both, with a robust application programming interface (API)
More informationAvigilon Control Center Standard Web Client User Guide. Version 5.6
Avigilon Control Center Standard Web Client User Guide Version 5.6 2006-2015, Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with respect to any copyright,
More informationGenie XMS Central Management Software
Enterprise-Level, Intelligent Analysis, Distributed Connectivity User s Manual Copyright EverFocus Electronics Corp, Release Date: January, 2015 Notice: The content is subject to change without notice.
More informationVideoXpert Integration - Symmetry Professional User Guide
VideoXpert Integration - Symmetry Professional User Guide USER GUIDE V1.2 26-Jul-17 Contents 1. Introduction... 3 2. Abbreviations... 3 3. Version Information... 3 3.1. Integration Component Version...
More informationVideo Management Software User Manual
Video Management Software User Manual Manual Version: V1.02 i Thank you for choosing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Disclaimer CAUTION!
More informationXProtect Go 2016 R2. Specification Sheet
XProtect Go 2016 R2 Specification Sheet Contents Feature Overview... 3 XProtect Go server modules... 3 XProtect Go client modules... 3 Detailed Product Features... 4 XProtect Go server modules... 4 XProtect
More informationicms Pro USER S Manual Ver 1.4
icms Pro USER S Manual Ver 1.4 Contents Panes... 7 How Can User Rights Affect Your Use of icms Pro SW?... 10 Minimum System Requirements... 11 Installing the icms Pro SW... 12 Download icms Pro from icatchinc
More informationAvigilon Control Center Enterprise Web Client User Guide. Version 5.8.4
Avigilon Control Center Enterprise Web Client User Guide Version 5.8.4 2006-2016, Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logo, AVIGILON CONTROL CENTER and ACC are trademarks
More informationHomeTroller SEL Getting Started Guide
HomeTroller SEL Getting Started Guide Congratulations on your purchase! Your HomeTroller SEL is ready to put you in control of your home. Please take a few minutes to read through this guide to familiarize
More informationS2 Security Corporation NetBox and Salient Systems CompleteView
Integrated security for an IP-connected world S2 Security Corporation NetBox and Salient Systems CompleteView Setup and Integration Guide December 2016 S2 Security Corporation 50 Speen St. Suite 300 Framingham,
More informationEMC Documentum My Documentum Desktop (Windows)
EMC Documentum My Documentum Desktop (Windows) Version 7.2 User Guide EMC Corporation Corporate Headquarters: Hopkinton, MA 017489103 15084351000 www.emc.com Legal Notice Copyright 2003 2015 EMC Corporation.
More informationInfinova 2217 Security Management System. User Guide
Infinova 2217 Security Management System Android SmartPhone Client For Smartphones, PDAs and other hand-held devices which use Android 2.2 (or higher) Operating System User Guide September 2015 Page 1
More informationWebsite Management with the CMS
Website Management with the CMS In Class Step-by-Step Guidebook Updated 12/22/2010 Quick Reference Links CMS Login http://staging.montgomerycollege.edu/cmslogin.aspx Sample Department Site URLs (staging
More informationSecure Guard Central Management System
Speco Technologies, Inc. Secure Guard Central Management System Usage Information Contents 1 Overview... 7 2 Installation... 7 2.1 System Requirements... 7 2.2 System Installation... 7 2.3 Command Line
More informationDownloading & Installing Audacity
Downloading Audacity 1. Open your web browser. 2. Navigate to the following URL: http://audacity.sourceforge.net/download/ 3. The system displays the Download page for Audacity. 4. Select your operating
More information2017 R3. Milestone Systems. XProtect Web Client 2017 R3. User Manual
2017 R3 Milestone Systems XProtect Web Client 2017 R3 User Manual Contents XProtect Web Client... 5 Log in... 5 Navigating the Home page (explained)... 5 Find a camera... 7 Search for a camera... 7 Navigate
More informationAndroid Mobile Client. User Guide. Версия 2.1.0
Android Mobile Client. User Guide Версия 2.1.0 1. General information about the Android mobile client..................... 3 2. Connecting to the server and working with servers in the Android client........
More informationForeScout Extended Module for Advanced Compliance
ForeScout Extended Module for Advanced Compliance Version 1.2 Table of Contents About Advanced Compliance Integration... 4 Use Cases... 4 Additional Documentation... 6 About This Module... 6 About Support
More informationHikCentral Control Client. User Manual
HikCentral Control Client User Manual Legal Information User Manual 2018 Hangzhou Hikvision Digital Technology Co., Ltd. About this Manual This Manual is subject to domestic and international copyright
More informationUSER S MANUAL FOR UNDER VEHICLE INSPECTION SYSTEM PORTABLE AND IN GROUND UNITS
USER S MANUAL FOR UNDER VEHICLE INSPECTION SYSTEM PORTABLE AND IN GROUND UNITS Revision Date Description Initials 0 2017 01 02 New template LR Index Chapter 1 INTRODUCTION... 3 Chapter 2 OPERATING INSTRUCTIONS...
More informationW Box VMS BOX T E C H N O L O G I E S.
W Box VMS BOX T E C H N O L O G I E S www.wboxtech.eu Contents Contents... 1 Overview... 3 1.1 Description... 3 1.2 Running Environment... 3 1.3 Function Modules... 3 Live view... 6 2.1 User Registration
More informationB3223P23 Release Notes. Zhejiang Uniview Technologies Co., Ltd.
Zhejiang Uniview Technologies Co., Ltd. Keywords: Version information, usage notes, precautions. Abstract: This document provides information about the B3223P23 board software, including version Acronym
More informationXProtect Corporate Integration with C CURE 9000 v2.60 User Manual April 25, 2018
XProtect Corporate Integration with C CURE 9000 v2.60 User Manual April 25, 2018 1 Table of Contents 1 Document information... 3 2 Document revision history... 3 3 Version Compatibility... 4 4 Feature
More informationWeb Push Notification
Web Push Notification webkul.com/blog/web-push-notification-for-magento2/ On - January 13, 2017 This impressive module allows you to send push notification messages directly to the web browser. The biggest
More informationXProtect Essential 2017 R1 Specification Sheet. Specification Sheet
Contents Feature Overview... 3 XProtect Essential server modules... 3 XProtect Essential client modules... 3 Detailed Product Features... 4 XProtect Essential server modules... 4 XProtect Essential Server
More informationTechnical Tip Building Rules and Actions Utilizing a Custom Query
Technical Tip Building Rules and Actions Utilizing a Custom Query Revision 07.06.2015 Technical Tip: Building Rules and Actions Utilizing a Custom Query Page 1 Table of Contents 1.0 HOW IT WORKS... 3 2.0
More informationicms Pro USER s MANUAL Ver 1.0
icms Pro USER s MANUAL Ver 1.0 Contents Target Audience for this Document... 5 Copyright, Trademarks and Important Information... 5 Copyright... 5 Disclaimer... 5 Introduction... 6 Tabs... 6 Panes... 7
More information1. Within the Configuration workspace go to Devices > Management and select the cameras you wish to display on the decoder.
2 3 1. Within the Configuration workspace go to Devices > Management and select the cameras you wish to display on the decoder. 2. Right-click and select User Management > Add user 3. Add a new user and
More informationHomeTroller Zee Quick-Start Guide
HomeTroller Zee Quick-Start Guide Congratulations on your purchase! Your HomeTroller Zee is ready to put you in control of your home. Please take a few minutes to read through this guide to familiarize
More informationTechnical Q&A. Questions & Answers. Last updated: February 28th, 2003 Rev: 1.1
NETWORK CAMERAS Technical Q&A AXIS Panorama PTZ Network Camera Questions & Answers Last updated: February 28th, 2003 Rev: 1.1 1 Q&A - Axis Panorama PTZ Network Camera 1.1 Topics covered Applications Features
More informationVMS2.0 Client Software. User Manual
VMS2.0 Client Software User Manual Chapter 1 Contents Brief Introduction...1 1.1 Description... 1 1.2 Running Environment...1 Chapter 2 Installation... 2 Chapter 3 Live View... 4 3.1 User Login...4 3.2
More informationSecure Transfer Site (STS) User Manual
Secure Transfer Site (STS) User Manual (Revised 3/1/12) Table of Contents Basic System Display Information... 3 Command Buttons with Text... 3 Data Entry Boxes Required / Enabled... 3 Connecting to the
More informationVMS-A1 Client Software. User Manual
VMS-A1 Client Software User Manual Contents Contents... 2 Chapter1. Overview... 4 1.1 Description... 4 1.2 Features & Functions... 4 Chapter2. Update Info... 6 Chapter3. Starting VMS-A1... 7 3.1 Installing
More informationSharePoint General Instructions
SharePoint General Instructions Table of Content What is GC Drive?... 2 Access GC Drive... 2 Navigate GC Drive... 2 View and Edit My Profile... 3 OneDrive for Business... 3 What is OneDrive for Business...
More informationTotal Connect 2.0 Online Help
Security Events Users Locations Video Hints for use. After logging in hit F11 to toggle full screen mode. Hover over icons for tool tip help. Upon the initial login, control panel data should be imported
More informationProduct and company names appearing in this document are trademarks of each respective company or organization.
. CMS_beta LEGAL INFORMATION Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of the company is prohibited.
More informationUser Guide. Avigilon Control Center Mobile Version for Android
User Guide Avigilon Control Center Mobile Version 1.4.0.2 for Android 2011-2014 Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with respect to any
More informationMagicInfo VideoWall Author
MagicInfo VideoWall Author MagicInfo VideoWall Author User Guide MagicInfo VideoWall Author is a program designed to construct a VideoWall layout and create VideoWall content by adding various elements
More informationManaging recording controls from Dashboard 1. On the Avaya Workforce Optimization Select Home
Avaya Workforce Optimization Select Quick Reference for Contact Center Agents Release 5.2.2 Issue 1 September 2018 2016-2018, Avaya, Inc. All Rights Reserved. Avaya Workforce Optimization Select Home page
More informationUsing MindManager 8 for Windows with Microsoft SharePoint 2007 October 3, 2008
l Using MindManager 8 for Windows with Microsoft SharePoint 2007 October 3, 2008 Table of Contents TABLE OF CONTENTS... 2 1 INTRODUCTION... 3 2 USING MINDMANAGER 8 WITH MICROSOFT SHAREPOINT... 4 2.1 ADD
More informationVizit 6 Installation Guide
Vizit 6 Installation Guide Contents Running the Solution Installer... 3 Installation Requirements... 3 The Solution Installer... 3 Activating your License... 7 Online Activation... 7 Offline Activation...
More informationInstruction Manual. Wi-Fi Full HD 1080p IP Concealed Junction Box Hidden Camera. V 1.3
Instruction Manual Wi-Fi Full HD 1080p IP Concealed Junction Box Hidden Camera After Sales Support techsupport@123anfang.com www.yooseecamera.com V 1.3 Hardware Installation 1. Connect the power supply
More informationIP Utility. User s Manual For Version
IP Utility User s Manual For Version 4.3.03 Table of Contents 1 Overview 3 What is IP Utility...3 Featured Functions...4 2 Getting Started 5 System Requirement...5 Operation System... 5 Running the Application...5
More informationCA Output Management Web Viewer
CA Output Management Web Viewer User Guide Release 12.1.00 This Documentation, which includes embedded help systems and electronically distributed materials, (hereinafter referred to as the Documentation
More informationVIEVU Solution App User Guide
VIEVU Solution App User Guide INTRODUCTION VIEVU Solution is the next generation, fully-hosted, cloud evidence management system. This guide describes how to operate the VIEVU Solution. Additional support
More informationMilestone Systems. XProtect Web Client 2018 R1. User Manual
Milestone Systems XProtect Web Client 2018 R1 User Manual Contents XProtect Web Client... 5 Log in... 6 Navigating the Home page (explained)... 7 Find a camera... 8 Search for a camera... 8 Navigate to
More informationPolicy Manager in Compliance 360 Version 2018
Policy Manager in Compliance 360 Version 2018 Policy Manager Overview 3 Create a Policy 4 Relate a Policy to Other Policies, Departments, and Incidents 8 Edit a Policy 10 Edit a Policy by Using the Edit
More informationHomeTroller S6 Getting Started Guide
HomeTroller S6 Getting Started Guide Congratulations on your purchase! Your HomeTroller S6 is ready to put you in control of your home. Please take a few minutes to read through this guide to familiarize
More informationVisual Presenter Visual Webcaster
) Visual Presenter Visual Webcaster Last Revised 8/3/11 Powered by Table of Contents Overview 3 System Requirements 4-5 Login 6 Main Menu 7 Preparing for the Event Presenter 8-12 Slides 13-20 URL s 21-23
More informationGuidelines for uploading and downloading documents through Logicaldoc
1: Logging in into Logicaldoc 1.1 Use this URL for login: http://172.16.2.9:8080/logicaldoc/ 2.1 Enter login id and password and click on Sign In Following window will appear after logging in: 2: Creating
More informationUSER MANUAL. SuitePort - SuiteCRM Customer Portal for WordPress TABLE OF CONTENTS. Version: 2.5.0
USER MANUAL TABLE OF CONTENTS Introduction... 1 Benefits of Customer Portal... 1 Prerequisites... 1 Installation... 2 SuiteCRM Plug-in Installation... 2 WordPress Manual Plug-in installation... 3 Plug-in
More informationDemonstrating Agent Vi s Analytics. savvi 5.3 & 5.4
Demonstrating Agent Vi s Analytics savvi 5.3 & 5.4 Contents 1 Overview... 3 1.1 About savvi Demo Setup... 3 1.2 System Requirements... 3 1.2.1 Hardware... 3 1.2.2 Operating System... 3 2 Installation Procedure...
More informationCompleteView & C CURE 9000 Integration Quick Start Guide Salient CompleteView
CompleteView & C CURE 9000 Integration Quick Start Guide Salient CompleteView i CompleteView - CCURE 9000 Integration Quick Start Guide Table of Contents Introduction... 3 Supported Operating Systems...
More informationCMS Shado 9. Quick Start Guide
CMS Shado 9 Quick Start Guide 1 Logging In 3 Shado Central Interface 4 Sections, Pages and Containers 7 Sections 7 Pages 7 Containers 7 The Site Tree 8 Edit Content on a Page 9 Editing Container Content
More informationLogin: Quick Guide for Qualtrics May 2018 Training:
Qualtrics Basics Creating a New Qualtrics Account Note: Anyone with a Purdue career account can create a Qualtrics account. 1. In a Web browser, navigate to purdue.qualtrics.com. 2. Enter your Purdue Career
More informationHow to configure the UTM Web Application Firewall for Microsoft Remote Desktop Gateway connectivity
How to configure the UTM Web Application Firewall for Microsoft Remote Desktop Gateway connectivity This article explains how to configure your Sophos UTM to allow access Microsoft s Remote Desktop Gateway
More informationMERCATOR TASK MASTER TASK MANAGEMENT SCREENS:- LOGIN SCREEN:- APP LAYOUTS:-
MERCATOR TASK MASTER TASK MANAGEMENT SCREENS:- LOGIN SCREEN:- APP LAYOUTS:- This is Navigation bar where you have 5 Menus and App Name. This Section I will discuss in brief in the Navigation Bar Section.
More informationTRIDENT - CMS Plus. 64CH Central Management System Software
TRIDENT - CMS Plus 64CH Central Management System Software Please read instructions thoroughly before operation and retain it for future reference. For video demonstration about CMS Lite operation, please
More informationUser Guide. Avigilon Control Center Mobile Version for ios
User Guide Avigilon Control Center Mobile Version 1.4.0.2 for ios 2011-2014 Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with respect to any copyright,
More informationPowerFocus USER S MANUAL. EverFocus Central Management Software for Network Video Recording. Release Date: August, 2011 Rev. 1.0
PowerFocus EverFocus Central Management Software for Network Video Recording USER S MANUAL Release Date: August, 2011 Rev. 1.0 System requirements Total FPS 3600 ~ 1200 1200 ~ 480 480 ~ 300 300 ~ 200 200
More informationUSER GUIDE for Salesforce
for Salesforce USER GUIDE Contents 3 Introduction to Backupify 5 Quick-start guide 6 Administration 6 Logging in 6 Administrative dashboard 7 General settings 8 Account settings 9 Add services 9 Contact
More information0. Introduction On-demand. Manual Backups Full Backup Custom Backup Store Your Data Only Exclude Folders.
Backup & Restore 0. Introduction..2 1. On-demand. Manual Backups..3 1.1 Full Backup...3 1.2 Custom Backup 5 1.2.1 Store Your Data Only...5 1.2.2 Exclude Folders.6 1.3 Restore Your Backup..7 2. On Schedule.
More informationPerceptive Intelligent Capture Visibility
Perceptive Intelligent Capture Visibility User Guide Version: 3.1.x Written by: Product Knowledge, R&D Date: February 2016 2015 Lexmark International Technology, S.A. All rights reserved. Lexmark is a
More informationGuide VIGIL Server Quick Start Guide
Guide 120040 VIGIL Server Quick Start Guide Guide #: 120040-5 Revised: July 31st, 2017 Product Affected: VIGIL Server v10.00.0000 Purpose: The purpose of this document is to quickly familiarize its reader
More informationHTTPS The New B2Bi Portal. Bank of America s secure web transmission interface user guide
HTTPS The New B2Bi Portal Bank of America s secure web transmission interface user guide This manual contains proprietary and confidential information of Bank of America and was prepared by the staff of
More informationIIBA Chapter Website: Quick Start Guide Version 1.3
IIBA Chapter Website: Quick Start Guide Version 1.3 Table of Contents Introduction... 3 Website Quick Start Guide... 4 A. Prerequisites... 4 B. Change Temporary Password... 4 C. User Groups... 8 D. Sections...
More informationOperating Instructions (Additional Features)
Network Camera Model No. BB-HCM381 Additional Feature table The following features are added to the camera. Read both Operating Instructions manuals before starting to use the product. Additional Features
More informationOSD Main Menu. Select this option to start EZ Setup Wizard. Select this option to enter the Setup menu.
OSD Main Menu To enter the main menu, press the setup button on the remote control or right click on the mouse and select setup from the submenu Enter username and password. The default username is Option
More informationHomeTroller S6 Quick-Start Guide
HomeTroller S6 Quick-Start Guide Congratulations on your purchase! Your HomeTroller S6 is ready to put you in control of your home. Please take a few minutes to read through this guide to familiarize yourself
More informationRecord snapshot and video to Dropbox
V.150618 Record snapshot and video to Dropbox 1. Overview All Phylink cameras have the ability to send timed or alert trigged images and video through the Dropbox cloud storage. You can configure Phylink
More information