Converter RS232. Up to 16 addresses PV 6000 SP 6000 F C ALM SP3000 RSP OUT 1 2 UDC3000 UDC Figure 1 - LeaderLine PC Software

Transcription

1 L LeaderLine PC Software Overview Honeywell s LeaderLine PC Software (LPCS) is a cost effective and efficient means to monitor, archive, and configure Honeywell s LeaderLine controllers and recorders using a Windows -based Personal Computer program. These products include: UDC3 Universal Digital Controller UDC6 Process Controller DPR3 Digital Process Recorder DPRC/D Pen/Multipoint Digital Recorders The software has been developed around the industry standard MS- DOS 5./Windows 3. or higher operating system and is designed for either novice or experienced computer users. The familiar windows environment and the on-line and contextsensitive help utility allow the first time user to quickly accomplish the required tasks. Up to 6 addresses L ALM DI RSP OUT SP3 F C UDC3 Converter PV 6 SP 6 RS232 UDC 6 Figure - LeaderLine PC Software ASCII RS 422/485 DPR /96 Page of 8 Specification DPR 3 Software Capabilities Software capabilities include: Set-up - installs the LPCS software into the personal computer and allows changes to the installed settings and languages. Network Configuration - selects device node addresses and tag names. Product Configurator - configure devices either on-line or off-line. All devices are totally configurable with full configuration dependencies supported. Default device database templates provide for ease of initial device configuration. Operator Displays - let the operator monitor, archive, and selectively change device variables on-line to tune your process. Help - program accesses On-line and Context sensitive help. Standard Features Easy Set-up and Use - the software package is simple to install and requires no advanced PC skills. The set-up procedure uses preformatted displays and on screen selection. Transportable Software - this software is transportable across Windows (V3.) based, IBM equivalent desktop and portable Personal Computers having a minimum 386 processor and 4 MB of memory. Network Configuration - lets you specify the name of a network. Products are assigned to the network with associated addresses and tag names. Industrial Automation and Control, Virginia Drive, Fort Washington, PA 934 Printed in U.S.A. Copyright 996 Honeywell Inc. Standard Features, cont.. On-line/Off-line Device Configuration - all devices are totally configurable either On-line or Offline with full configuration dependencies supported during configuration. Default device database templates are provided for ease of initial device configuration. A record of device configuration can be printed out. Real Time Monitoring - real time operating displays are preformatted. Multiple display selection and organization within the workspace is supported. UDC displays can be mixed with a Trend display (built for the DPR) on the same screen. Trend displays can be mixed with loop displays.

2 Page 2 Standard Features, cont.. Archiving - is run as a background task, allowing you to run other operations while archiving is in progress. You can store PV s (up to 32 for DPR3) plus related Alarm and Digital Input status per recorder. Standard Features, cont.. Data Logging and Storage with Analysis - data is stored in ASCII format on the PC hard disk and can be easily imported to most spreadsheet programs such as Microsoft Excel and Lotus,2,3 to enable presentation in graphical format or for further calculations. Standard Features, cont.. Multilingual - support for international sales include English, French and German. Communications - lets you supervise 6 addresses with a mix of recorders and controllers. There are 28 points of data available Main Menu The Main Menu bar is located along the upper edge of the window (See Figure 2). The LPCS program s Main Menu is the top level menu that allows access to drop-down menus that will navigate you through the application and let you quickly select a specific function. Each menu item describes its functionality. A Toolbar at the top of the window offers shortcuts to the most common menu items. A Status bar at the bottom of the window indicates information about the current window including downloading and uploading status. LeaderLine PC Software File Edit View On-Line Comm Options Window Help Window Spreadsheet Toolbar Status Bar Copy Communication Parameters... Network Selection... New Configuration... Open Configuration... New Network Open Network... Close Save Sav e As... Remove Configuration Remove Network... Print Ctrl+ P Print Configuration... Exit Device Diagnostic... Password Dependencies Information Compare DB Save Workspace Upload Configuration... Monitor... Archive Cascade Ctrl+ R Tile Ctrl+ T Arrange Icons Ctrl+ A Select Product... Archiving Parameters... Start Archiving I Contents Tip of the Day About the LPCS Figure 2 - Main Menu Toolbar The toolbar (Figure 3) contains several commonly used functions that can be accessed by clicking on the corresponding button. The buttons are grouped to show relationships. Save Print Copy Open Configuration Window New Configuration Select Network Spread Sheet Dependencies Monitor Information Download Configuration Upload Configuration I 2295 Figure 3 - Toolbar

3 Page 3 Configuration Display and Template for Product Configuration Full Product Line configuration: Off-line or On-line. This function includes checks and adjustments for all dependencies associated with configuration. Off-line configuration lets you create new configuration databases from a template. On-line configuration lets you upload configuration data and modify the displayed configuration of a device that is connected to the link. In either case, configuration can be saved and downloaded to specific devices on the network. Figure 4 is an example of a UDC6 default configuration template. Tuning Tuning L2 SP Ramp Adaptive Algorithm Adv Math Out Alg Input Input 2 Input 3 Input 4 Input 5 Control Control 2 Options Com Alarm Template:UDC6 Tuning Parameters Operations PROP BD or GAIN GAIN VALn RATE MIN RSET MIN/RPM/MAN MAN RSET PROP BD2 or GAIN2 RATE2 MIN RSET2 MIN/RPM CYCLE SEC CYC2 SEC SECURITY LOCKOUT PVEU VAL PVEU VAL2 PVEU VAL3 Next Page 4 4 NONE Loop MANUAL AUTOMATIC Output Loop Loop 2 Output (Manual Mode) Setpoints Loop Loop 2 Local SPs Source Local SPs Value 5 ONE ONLY Remote SPs SourceNONE Compare DB Loop 2 MANUAL AUTOMATIC 5 DownLoad 2292 Figure 4 - Configuration Display and Template Monitoring Display For Control Loops You can group displays by opening multiple windows in the work space to create a monitoring display for control loops. (See Figure 5) The displayed operating parameters are: Process Variable Value Setpoint Value* Setpoint Source* Mode* - (Auto/Manual) Alarms Status (On/Off only) Bargraph of Setpoint(Optional SP Pointer) Process Variable (Eng. Units) Output Values* (%) Proportional Band or Gain value* Rate Value in minutes* Reset Value in min or rpm* *Value or selection can be changed. 3 5 Tag Name FT- % SP PV OP PV Value 2 SP Value 225 Output 5 SP Select Local Mode Man ALM ALM2 Tuning Loop SP Bargraph 3 5 Tag Name FT- % SP PV OP PV Value 2 SP Value 225 Output 5 SP Select Local Mode Man ALM ALM2 Tuning Loop SP Bargraph Figure 5 - Monitoring Display for Control Loops 3 5 Tag Name FT- % SP PV OP PV Value SP Value Output SP Select Mode ALM Local Man ALM2 Tuning Loop x SP Bargraph

4 Page 4 Monitoring/Trending Display For Recorders The Recorder Monitoring /Trending window enables operations such as: Trending of 8 Inputs per page can be displayed in real time. Change the vertical scale of the curves Display the tag name, value in engineering units of each channel, up to 8 channels per page, up to 4 pages (for DPR3) Display the alarm states Send user messages of up to 3 characters to the recorder to be printed on the recorder chart Display a warning message on alarm Page selection button allows display of up to 32 channels per recorder (DPR3) Capability to change background selection to Black or white Figure 6 is an example of a DPR3 recorder Monitor/Trend window. DPR3 Address: 6 OVEN M essage Help ARCHIVING P age: ALARM ON CHAN32 % 8% 6% 4% 2% % Scale Max : 4 :: min :5:34 n Al TAG NAME VALUE UNIT n Al TAG NAME VALUE UNIT SQUARE 45.3 MV 5 TRI-WAVE MV Min : SQUARE SQUARE MV MV 6 7 TRI-WAVE TRI-WAVE MV 22.4 MV OK 4 SQUARE 6.8 MV 8 TRI-WAVE 2.38 MV Figure 6 - DPR3 Recorder Monitor /Trend Window

5 Page 5 Archiving The LPCS software package lets you store data from up to 6 recorders (Max 28 data points) on the PC s hard disk. The software can save PV, Alarm, or Digital Input status data through a parameter selection window. The current date, time and channel numbers are also systematically saved each time the inputs are scanned and the data is archived. After enabling the archiving function for a specific recorder or group of recorders, the software will automatically start the storage for a preconfigured time period. A screen indication on the monitoring/trending display alerts the operator that the archiving function has been activated for the current recorder. The archiving function is still active when you switch to display another recorder. An overwrite selection lets you choose to stop archiving when the file is full or overwrite the oldest data with the most recently archived data. The software automatically indicates the free space available on the hard disk and the memory space required for data storage. Archiving Display For Recorders The Recorder Archiving Parameter Window is set up for all the recorders connected on the communications link and enables operations such as: Data storage - ASCII files Archiving time - Days, Hours, and Minutes selectable Scanning Period - Based on multiple of the scanning rate. Stop/start/Overwrite archived data Parameter selection of analog values, Digital Values, and alarms. Figure 7 is an example of an Archiving Parameter Window. ARCHIVING PARAMETERS Archiving Time Overwriting Files Days Hours Min. Yes No Number of consecutive Files: 5 Archive one Sample out of: 3 Scan Rate: 2 s Size of one File: 864 Number of recorder to archive: Global Size: 4 32 Samples by File: Free space on disk: OK Cancel Help Figure 7 - Archiving Parameter Window

6 Page 6 Archiving Data File Data can be stored in ASCII format (See Figure 8) either on the PC s hard drive or on a floppy disk Tag name of Recorder, Device Type, address, File Name, Chart Min. and Max.,Channel #, Date and Time are systematically stored. Archiving DATA file name can be selected as well as data to be stored such as PV value, Alarm, and Digital Input status. Data is stored in such a way that it can be imported into most current spreadsheet software packages such as EXCEL TM and LOTUS TM for further manipulation. (For example: Graphical and computing). File: c\lpcs\boiler.dpr Recorder: DPR3 Address: Tag Name: BOILER Name: SINE TRI-WAVE SQUARE CHANNEL Unit: mv mv mv mv Low: 3 2 High: DATE //996 //996 //996 //996 //996 //996 //996 //996 //996 //996 //996 //996 //996 //996 //996 //996 //996 TIME CH CH CH CH DIG ACH Figure 8 - Archiving Data File File Import Capability Figure 9 shows the ASCII file that has been imported into an spreadsheet. The graph has been made with EXCEL TM graphic tools INPUT INPUT2 INPUT3 INPUT4 9:33: 9:43: 9:54: 2:4: 2:5: 2:25: 2:35: 2:46: 2:56: Figure 9 - Excel Spreadsheet

7 Page 7 Condensed Specifications Platform Communications Operating System Compatibility Archived Data Documentation Honeywell Products Supported User Configuration Database Commercial PC Platform: CPU: 8386, 8486, Pentium families Display: VGA Color, SVG RAM: 4MB Min. Hard Disk: 5MB Min. for LPCS application with windows Floppy: MB Ports serial adapter required for RS232 to RS485/422 conversion Uses PC serial port and RS485/422 converter Multidrop RS485 ASCII, up to 6 addresses, mixed product type. For example: Recorders and controllers - Link supports up to 28 data points - Multiport switching capability RS232 to RS485/422 converter required: - recommend Burr Brown (Model LDM485-ST or -LE) or Westermo (Model MA42) Operates in the Windows 3. environment or higher The LPCS software will be compatible with the following commercially available packages: Database: Microsoft Access Spreadsheet: Microsoft Excell, Lotus,2,3 Archive File: ASCII Format An ASCII format file for recorder historized data that can be opened from packages such as Excel, Lotus,2,3, or any ASCII Editor. On-line Help User Manual and displays in English, German, or French Universal Digital Controllers and Digital Process Recorders with RS485 Communications Option: UDC3 Controller, rev 39 and 3 or later UDC6 Controller, rev 75 or later DPR3 Recorder, rev BD or later DPR Recorder, rev A*38A or AK or later Available through menu selections Communications Link Wiring Using an RS232 to RS485 Converter Figure shows the Honeywell communications link connecting a personal computer through an RS232 to RS485 converter to a maximum of 6 addresses. 2 Ohm Resistor Computer RS232 output RS232 to RS485 Converter T+/R+ T /R + ST Device on Link Shield Twisted pair shield connect shield wire with supplied crimp connector To other devices on link Maximum 6 addresses 2 ohm resistor between A and B on last device on link Figure - Communications Link Wiring Using a RS232 to RS485 Converter

8 Page 8 Ordering Information For the complete ordering information for LeaderLine PC Software, call in the U.S. or contact your local Honeywell Sales Office. Honeywell offers a full line of Sensors, Transmitters, and Final Control Devices for use with the Controllers and Recorders. These devices include: Thermocouples, RTDs Digital Panel Indicator, Pressure Transmitters, Flow Transmitters, Liquid Level Transmitters. Valve, Actuators, and Electric Motors. Specifications are subject to change without notice. Distributor : Industrial Automation and Control Honeywell Inc. In the U.S.A.: Honeywell Industrial Automation and Control, 644 North Black Canyon HWY., Phoenix, AZ 8523, (8) In Europe: Honeywell S.A., 884 Amiens Cedex 2, (33) Honeywell Control System Ltd., Honeywell House, Bracknell, UK-RG 2 EB, (44) In Japan: Yamatake-Honeywell Co. Ltd., Nagai Int l Bldg., Shibuya-Ku, Tokyo 5 Japan, In Asia: Honeywell Asia Pacific Inc., Room , Sun Hung kai Centre, No. 3 Harbor Road, Wanchai, Hong Kong, (852) In the Mediterranean: Africa and Middle East Region, Honeywell SpA, Via Vittor Pisani 3, 224 Milano, Italy (39-2) 6773 Honeywell Pacific Division: Honeywell Pty Ltd., 5 Thomas Holt Drive, North Ryde Sydney, NSW Australia 23, (6-2) In Canada: The Honeywell centre, 55 Gordon Baker Road., Ontarion M2H 3N7, In Latin America: Honeywell Inc.,455 Commerce Way, Suite 5, Miami Lakes, Florida , (35)