User Manual. GUI Application HiView 2.0. HiView Release /2013. Technical support

Transcription

1 User Manual GUI Application 2.0 Technical support

2 The naming of copyrighted trademarks in this manual, even when not specially indicated, should not be taken to mean that these names may be considered as free in the sense of the trademark and tradename protection law and hence that they may be freely used by anyone Hirschmann Automation and Control GmbH Manuals and software are protected by copyright. All rights reserved. The copying, reproduction, translation, conversion into any electronic medium or machine scannable form is not permitted, either in whole or in part. An exception is the preparation of a backup copy of the software for your own use. For devices with embedded software, the end-user license agreement on the enclosed CD/DVD applies. The performance features described here are binding only if they have been expressly agreed when the contract was made. This document was produced by Hirschmann Automation and Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right to change the contents of this document without prior notice. Hirschmann can give no guarantee in respect of the correctness or accuracy of the information in this document. Hirschmann can accept no responsibility for damages, resulting from the use of the network components or the associated operating software. In addition, we refer to the conditions of use specified in the license contract. You can get the latest version of this manual on the Internet at the Hirschmann product site ( Printed in Germany Hirschmann Automation and Control GmbH Stuttgarter Str Neckartenzlingen Germany Tel.: Rel /2013

3 Contents Contents 1 Introduction 5 2 Starting the application System Requirements Hardware Operating system Starting Starting under Windows Starting under Linux 9 3 Using Adding a device Tile view Table view Removing a device Saving an individual configuration Delete cache directory Devices in the Hirschmann Application Lab 18 4 Device access Graphical user interface (GUI) Command Line Interface (CLI) Displaying a certificate 22 5 Connecting to Industrial HiVision 23 3

4 Contents 6 Maintenance 25 7 Deinstallation 27 A Tested products and software versions 29 B Index 37 C Further Support 39 4

5 Introduction 1 Introduction is a stand-alone application. thus allows you to use the graphic user interface of Hirschmann Ethernet devices with management independently of other applications, such as a browser. is convenient in that it allows you to store on a portable storage medium and start it on other computers in your data network. also supports your security efforts, as accessing Hirschmann devices with product certificate is possible solely with a valid product certificate. Application Example As the administrator of a large data network, you sometimes have to visit sites within your data network. With a USB stick in your pocket, on which you have previously copied with your settings, you have barrier-free access to the graphic interface of Hirschmann Ethernet devices. Forget difficulties such as the incompatibility of browsers, Java versions or Java plug-ins, installation with entries in the registry or the changing cache content of browsers on different computers. 5

6 Introduction 6

7 Starting the application 2 Starting the application is a stand-alone, portable application. This section describes the prerequisites and preparations for starting the application. 7

8 Starting the application 2.1 System Requirements 2.1 System Requirements Hardware Processor x86 compatible CPU, min. 1 GHz RAM at least 1 GB, 2 GB recommended. requires approx. 50 MB free RAM. For every open window, requires an additional 130 MB RAM. To start Industrial HiVision, requires an additional 150 MB RAM. Disk space 1 GB free. Monitor resolution at least 1024x768 pixels Operating system Windows XP Professional, 32 Bit Windows 7 Professional 32 Bit 64 Bit Windows Server 2003, 32 Bit PC Linux 32 Bit: Debian Bit: Ubuntu

9 Starting the application 2.2 Starting 2.2 Starting Starting under Windows Unpack the zip file onto your portable medium (SD card, USB stick) or onto the hard drive of your computer. Start the application by double-clicking the program symbol.exe. The first time you start the application, asks you to accept the license conditions. After you have accepted the license conditions, creates the configuration file [version number].cfg. Among other things, the configuration file also contains the languages of the application interface that you can select. Note: opens the last saved configuration when you restart the computer Starting under Linux Extract the Zip file into a file system that supports Execute rights. Depending on the Linux derivative, the file system can be stored onto a portable medium (SD card, USB stick) or onto the hard drive of your computer. Provide Execute rights to the applications.sh and AppletLauncher.sh with the command chmod +x.sh. 9

10 Starting the application 2.2 Starting The application requires on 64-bit Linux systems 32-bit system libraries. For Ubuntu the following packages include the 32 bit system libraries: libc6:i386 libext6:i386 libxrender1:i386 libxtst:i386 libxi6:i386 libgtk2.0:i386 libxslt1.1:i386 Start the application.sh. The first time you start the application, asks you to accept the license conditions. After you have accepted the license conditions, creates the configuration file [version number].cfg. Among other things, the configuration file also contains the languages of the application interface that you can select. You will find details on the different Linux derivatives on the product pages of Belden. Note: opens the last saved configuration when you restart the computer. 10

11 Using 3 Using 11

12 Using 3.1 Adding a device 3.1 Adding a device After you start it the first time, displays the following program window: Figure 1: program window after you start it the first time To add a device to the program window, proceed as follows: In the URL field at the bottom of the program window, enter the path with the IP address of your device or its domain name. Click the button. establishes a connection to the device, opens the graphical user interface of the device and adds the device to the program window. copies the program file of the device to the cache directory of the installation directory. 12

13 Using 3.2 Tile view 3.2 Tile view Figure 2: Tile view The Tile view is the default setting. If you want to switch from Table View to Tile view, proceed as follows: To display the Tile view, select Preferences:View:Tile view. Every tile represents one device and displays the device symbol, the device name and the device address. The more often you establish a connection to the device, the further forward places the device in the Tile view. 13

14 Using 3.3 Table view 3.3 Table view provides a Table view as an alternative to the Tile view: Figure 3: Table view To display the Table view, select Preferences:View:Table view. Every table row represents one device and displays the device symbol, the device name and the device address. Furthermore, indicates with a checkmark in the Open column if the graphical user interface of the device is open. The more often you establish a connection to the device, the further up the list places the device in the Table view. 14

15 Using 3.4 Removing a device 3.4 Removing a device To remove a device from the start window, proceed as follows: Tile view Select the tile of the device you want to delete: Click. Table view Select the table row with the device you want to delete: Select Devices:Delete Selected Devices. 15

16 Using 3.5 Saving an individual configuration 3.5 Saving an individual configuration allows you to create configurations for particular application cases in the.hvw format and to save them to a location of your choice. Thus, you determine which devices the program window displays. Application examples are a network related device selection and a selection on the basis of device families. To save an individual configuration, select File:Save as. To open an individual configuration, select File:Open. 16

17 Using 3.6 Delete cache directory 3.6 Delete cache directory When establishing a connection to a device, loads the device-specific application to the cache directory of your folder. When you are setting up the connection to this device again, the devicespecific application saved in the cache directory keeps you from having to wait for a reload. In order to free memory space on your storage medium, allows you to delete the cache directory in fully or in part. Select Preferences:Cache. displays the - Cache dialog. Select the devices which you want to delete from the cache directory. Click. 17

18 Using 3.7 Devices in the Hirschmann Application Lab 3.7 Devices in the Hirschmann Application Lab allows you to access a selection of devices in the Hirschmann Application Lab through the Internet. These devices allow you to familiarize yourself with the graphical user interface of the devices. Select File:Hirschmann Application Lab. 18

19 Device access 4 Device access 19

20 Device access 4.1 Graphical user interface (GUI) 4.1 Graphical user interface (GUI) To access a device through the graphical user interface, proceed as follows: Tile view Select the tile of the desired device. Table view To view the context menu, right-click the table row of the desired device. Select GUI. Note: If your computer is connected to the device through a firewall, enter a rule in the firewall that allows the data traffic through port

21 Device access 4.2 Command Line Interface (CLI) 4.2 Command Line Interface (CLI) To access a device through the Command Line Interface (CLI), proceed as follows: Tile view To view the context menu, right-click the tile with the desired device. Select either Telnet or SSH. Table view To view the context menu, right-click the table row of the desired device. Select either Telnet or SSH. As an alternative, allows you, in both the Tile view and the Table view, to start the CLI through the URL field and the buttons at the bottom of the program window. Note: If your computer is connected to the device through a firewall, enter a rule in the firewall that allows the data traffic through port 22 (SSH) or port 23 (Telnet). 21

22 Device access 4.3 Displaying a certificate 4.3 Displaying a certificate Hirschmann devices usually have certificates for the Web application (jar file). Depending on the device you access, the connection also has a certificate. To view the certificates, select in the graphical user interface of the device Tools:Retrieve Product Certificate. 22

23 Connecting to Industrial HiVision 5 Connecting to Industrial HiVision Connecting to Industrial HiVision To establish a connection to the Web server of Industrial HiVision, you proceed as follows: Allow remote access in the Industrial HiVision settings and activate the Web server. In the URL field of the start window, enter the path with the IP address and the port of the Industrial HiVision Web server. For example: https is the Web server protocol is the IP address of the network management station on which Industrial HiVision is active is the port of the Industrial HiVision Web server xx. Click Open. Note: The Web server port Industrial HiVision uses is version-dependent. You will find the port Industrial HiVision uses in the settings under Preferences:Advanced:Services. 23

24 Connecting to Industrial HiVision 24

25 Maintenance 6 Maintenance Hirschmann are continually working on improving and developing their software. You should regularly check whether there is a new version of the software that provides you with additional benefits. You will find information about updates and upgrades on the Internet pages of Hirschmann Automation and Control GmbH. 25

26 Maintenance 26

27 Deinstallation 7 Deinstallation is a stand-alone, portable application. Therefore, deinstallation is also very simple. Quit the program before you start the deinstallation. Note: Remember that the directory also contains the configuration file [version number].cfg. If you want to use the configuration file after the deinstallation, save the configuration file in a different place before the deinstallation. Delete the directory that you created during the installation by unpacking the zip file. Also delete, if necessary, your individual configurations of the displayed devices which you have saved to a location of your choice in the.hvw format. 27

28 Deinstallation 28

29 Tested products and software versions A Tested products and software versions Products with Classic Switch Software EAGLE MACH100 L2P MACH100GE L2P MACH1000 L2P

30 Tested products and software versions MACH1000GE MACH1000GE L3P MACH MACH4000 L2P/L3E

31 Tested products and software versions MACH4000 L3P MACH4000XG L2P/L3E/L3P MS20/30 L2E

32 Tested products and software versions MS20/30 L2P Mice Octopus OM L2E Octopus OM L2P

33 Tested products and software versions Octopus OS L2P PowerMice L2P/L3E/L3P RS RS2-4R 1.00 RS20/30 L2B

34 Tested products and software versions RS20/30/40 L2E/L2P RSB RSR Products with software HiOS / HiSecOS EAGLE20 Ruggedized EES, EES-PRP EES-HSR, EES-MRP

35 Tested products and software versions MSP RSP, RSP-MRP, RSP-PRP RSP-HSR RSPL RSPS, RSPS-HSR, RSPS-MRP, RSPS-PRP

36 Tested products and software versions 36

37 Index B Index B Barrier-free 5 C Cache 12, 17 Certificate 22 Configuration file 9, 10, 27 D Deinstallation 27 Disk space 8 U Update 25 URL 12, 23 USB stick 5, 9, 9 W Windows 8, 9 Z Zip file 9, 9 F FAQ 39 H Hirschmann Application Lab 18 L Language 9, 10 License conditions 9, 10 Linux 8, 9 M Memory space 17 Monitor resolution 8 P Portable 5 Processor 8 Product certificate 22 Program window 12, 15 R RAM 8 S SD Card 9, 9 Stand-alone 5 Storage medium 17 System requirements 8 T Table view 14 Technical Questions 39 Tile view 13 Training Courses 39 37

38 Index 38

39 Further Support C Further Support Technical Questions For technical questions, please contact any Hirschmann dealer in your area or Hirschmann directly. You will find the addresses of our partners on the Internet at Contact our support at You can contact us in the EMEA region at Tel.: +49 (0) hac.support@belden.com in the America region at Tel.: +1 (717) inet-support.us@belden.com in the Asia-Pacific region at Tel.: inet-ap@belden.com Hirschmann Competence Center The Hirschmann Competence Center is ahead of its competitors: Consulting incorporates comprehensive technical advice, from system evaluation through network planning to project planning. Training offers you an introduction to the basics, product briefing and user training with certification. The current technology and product training courses can be found at Support ranges from the first installation through the standby service to maintenance concepts. 39

40 Further Support With the Hirschmann Competence Center, you have decided against making any compromises. Our client-customized package leaves you free to choose the service components you want to use. Internet: 40

41 Further Support 41

42