Roller Rail Systems (Additional roller runner blocks SNS R18, SLS R183, FXS R1854) R31EN 315 (1.9) The Drive & Control Company
Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical Elements Manual Production Systems Transfer Systems www.boschrexroth.com/dcl
R31EN 315 (1.9) Roller Runner Blocks SNS/SLS/FXS Bosch Rexroth AG 3 Roller Rail Systems Additional roller runner blocks SNS, SLS, FXS Product Overview 3 Rigidity, SNS 4 Rigidity, SLS 6 Rigidity, FXS 8 Roller Runner Block 1 SNS Slimline, normal, standard height 1 SLS Slimline, long, standard height 1 FXS Flanged, extra long, standard height 14 Product Overview The new roller runner blocks SNS R18 (slimline, normal, standard height) and SLS R183 (slimline, long, standard height) and FXS R1854 (flanged extra long, standard height) expand the already extensive range of Rexroth Roller Rail Systems by another 3 series. For more information on Roller Rail Systems, please refer to the main Roller Rail Systems R31EN 3 catalog. SNS R18 SLS R183 FXS R1854
4 Bosch Rexroth AG Roller Runner Blocks SNS/SLS/FXS R31EN 315 (1.9) Standard Roller Runner Blocks made of steel Rigidity, SNS Rigidity of the roller rail system at preload C Standard roller runner blocks SNS 18 Size 5 to measured values Roller runner block mounted using 6 screws of strength class 1.9 5 4 3 35 5 1 1 3 4 5 6 1. Down load. Lift-off load 5 5 35 4 3 1 1 3 4 5 6 3. Side load 5 5 35 4 3 Preload class C = preload 8 % C Key to graphs = elastic deflection F = load (N) 1 1 3 4 5 6
R31EN 315 (1.9) Roller Runner Blocks SNS/SLS/FXS Bosch Rexroth AG 5 Rigidity of the roller rail system at preload C3 Standard roller runner blocks SNS 18 Size 5 to measured values Roller runner block mounted using 6 screws of strength class 1.9 5 4 3 5 35 1 1 3 4 5 6 1. Down load. Lift-off load 5 5 35 4 3 1 1 3 4 5 6 3. Side load 5 5 35 4 3 Preload class C3 = preload 13 % C Key to graphs = elastic deflection F = load (N) 1 1 3 4 5 6
6 Bosch Rexroth AG Roller Runner Blocks SNS/SLS/FXS R31EN 315 (1.9) Standard Roller Runner Blocks made of steel Rigidity, SLS Rigidity of the roller rail system at preload C Standard roller runner blocks SLS R183 Sizes 5 to measured values Roller runner block mounted using 6 screws of strength class 1.9 5 4 3 5 35 1 1 3 4 5 6 1. Down load. Lift-off load 5 5 35 4 3 1 1 3 4 5 6 3. Side load 5 5 35 4 3 Preload class C = preload 8 % C Key to graphs = elastic deflection F = load (N) 1 1 3 4 5 6
R31EN 315 (1.9) Roller Runner Blocks SNS/SLS/FXS Bosch Rexroth AG 7 Rigidity of the roller rail system at preload C3 Standard roller runner blocks SLS R183 Sizes 5 to measured values Roller runner block mounted using 6 screws of strength class 1.9 5 4 3 35 5 1 1 3 4 5 6 1. Down load. Lift-off load 5 35 4 5 3 1 1 3 4 5 6 3. Side load 5 5 35 4 3 Preload class C3 = preload 13 % C Key to graphs = elastic deflection F = load (N) 1 1 3 4 5 6
8 Bosch Rexroth AG Roller Runner Blocks SNS/SLS/FXS R31EN 315 (1.9) Standard Roller Runner Blocks made of steel Rigidity, FXS Rigidity of the roller rail system at preload C Standard roller runner blocks FXS R1854 Size 65 measured values Roller runner block mounted using 4 screws of strength class 1.9 screws of strength class 8.8 5 4 3 65 1 4 6 8 1 1. Down load. Lift-off load 5 4 3 65 1 4 6 8 1 3. Side load 5 4 3 65 Preload class C = preload 8 % C Key to graphs = elastic deflection F = load (N) 1 4 6 8 1
R31EN 315 (1.9) Roller Runner Blocks SNS/SLS/FXS Bosch Rexroth AG 9 Rigidity of the roller rail system at preload C3 Standard roller runner blocks FXS R1854 Size 65 measured values Roller runner block mounted using 4 screws of strength class 1.9 screws of strength class 8.8 5 4 3 65 1 4 6 8 1 1. Down load. Lift-off load 5 4 3 65 1 4 6 8 1 3. Side load 5 4 3 65 Preload class C3 = preload 13 % C Key to graphs = elastic deflection F = load (N) 1 4 6 8 1
1 Bosch Rexroth AG Roller Runner Blocks SNS/SLS/FXS R31EN 315 (1.9) Standard Roller Runner Blocks made of steel Roller Runner Blocks SNS R18... 1 Slimline, normal, standard height Corrosion-resistant runner blocks, Resist CR, matte silver hard chrome plated, on request. Size Accuracy Part numbers for preload class class C C3 5 P R18 1 R18 3 1 SP R18 1 1 R18 31 1 35 P R18 3 1 R18 33 1 SP R18 31 1 R18 331 1 P R18 4 1 R18 43 1 SP R18 41 1 R18 431 1 P R18 5 1 R18 53 1 SP R18 51 1 R18 531 1 Preload classes C = preload 8 % C (preferred) C3 = preload 13 % C Note on dynamic load capacities and moments (see table) Determination of the dynamic load capacities and moments is based on a travel life of 1 m as per ISO 1478-1. Often only 5 m are actually stipulated. For comparison: Multiply values C, M t and M L from the table by 1.3. Size Load capacities (N) Load moments (Nm) C C M t M t M L M L 5 6 9 53 348 69 6 5 35 56 3 113 5 1 114 7 1 4 9 3 184 8 77 4 9 1 43 86 18 9 48 6 3 779 7 88 4 4 6
R31EN 315 (1.9) Roller Runner Blocks SNS/SLS/FXS Bosch Rexroth AG 11 Standard Roller Runner Blocks SNS R18... 1 S 9 d 8 E 8. E 8 S S B K 11 E 9. E 9 V 1 N 3 H 1 H d 8. H N 6 A 3 A A 1 A d) ØS 5 T B B 3 a) K 1 E b) B 1 E c) E 1 a) For O-ring Size 5: Ø 5 1.5 (mm) Size 35 to : Ø 7 1.5 (mm) Open lube bore as required (see Lubrication section in the main Roller Rail Systems catalog). b) Recommended location for pin holes (see Mounting Instructions, section on Locating Pins in the main Roller Rail Systems catalog). Due to manufacturing reasons, there may be rough-drilled holes at the recommended positions. These may be bored open to accommodate the locating pins. c) Lube nipple, thread M6 8 deep: can be fitted on all sides (end face only on size 5). Other lube fittings will have different dimensions. For more details on lube fittings, see the Accessories section in the main Roller Rail Systems catalog. d) Due to manufacturing reasons, guide rails in accuracy class H may not have a groove on the base. Size Dimensions (mm) A A 1 A A 3 B B 1 B B 3 d 8 d 8. E 1 E E 8 E 8. E 9 E 9. 5 48 4 3 1.5 91. 63.5 93. 97 6 5 35 35 33.4 4. 8.3 1.4 35 7 35 34 18. 114. 79.6 116. 11 6 5 5 5 5.3 56.6 13.1 9.1 86 43.5 14. 11.5 144. 15 8 6 6 6 6.9 69. 16.7 36.5 1 5 53 3.5 166.5 13.1 17.5 177 1 6 75 75 74. 81.6 18.85 4.75 Size Dimensions (mm) Weight H H 1 H 1) H ) K 1 K N 3 N ±.5 6 S S 5 S 3) 9 T 4) V 1 (kg) 5 36 3 3.6 3.4 19.1 8 5.5 14.3 M6 7 M3-5deep 3. 7.5.5 35 48 41 31.1 3.8 1. 3.4 1 7. 19.4 M8 9 M3-5deep 4. 8. 1. 6 51 39.1 38.8 7. 3.35 15 8..4 M1 14 M4-7deep 5.5 1..4 7 58 47.85 47. 31.75 34.95 17 9. 8.7 M1 16 M5-8deep 6. 1. 3.6 1) Dimension H with cover strip ) Dimension H without cover strip 3) Thread for attachments 4) Dimension T = hole spacing in the guide rail
1 Bosch Rexroth AG Roller Runner Blocks SNS/SLS/FXS R31EN 315 (1.9) Standard Roller Runner Blocks made of steel Roller Runner Blocks SLS R183... 1 Slimline, long, standard height Corrosion-resistant runner blocks, Resist CR, matte silver hard chrome plated, on request. Size Accuracy Part numbers for preload class class C C3 5 P R183 1 R183 3 1 SP R183 1 1 R183 31 1 35 P R183 3 1 R183 33 1 SP R183 31 1 R183 331 1 P R183 4 1 R183 43 1 SP R183 41 1 R183 431 1 P R183 5 1 R183 53 1 SP R183 51 1 R183 531 1 Preload classes C = preload 8 % C (preferred) C3 = preload 13 % C Note on dynamic load capacities and moments (see table) Determination of the dynamic load capacities and moments is based on a travel life of 1 m as per ISO 1478-1. Often only 5 m are actually stipulated. For comparison: Multiply values C, M t and M L from the table by 1.3. Size Load capacities (N) Load moments (Nm) C C M t M t M L M L 5 33 3 7 43 98 4 9 35 69 7 149 3 1 375 953 1 135 43 119 56 6 941 6 331 5 5 43 165 3 3 4 837 1 1 4 3 8 44
R31EN 315 (1.9) Roller Runner Blocks SNS/SLS/FXS Bosch Rexroth AG 13 Standard Roller Runner Blocks SLS R183... 1 S 9 d 8 E 8. E 8 S S B K 11 E 9. E 9 V 1 N 3 H 1 H d 8. H N 6 A 3 A A 1 A d) ØS 5 T B B 3 a) E K 1 B 1 E E 1 b) c) a) For O-ring Size 5: Ø 5 1.5 (mm) Size 35 to : Ø 7 1.5 (mm) Open lube bore as required (see Lubrication section in the main Roller Rail Systems catalog). b) Recommended location for pin holes (see Mounting Instructions, section on Locating Pins in the main Roller Rail Systems catalog). Due to manufacturing reasons, there may be rough-drilled holes at the recommended positions. These may be bored open to accommodate the locating pins. c) Lube nipple, thread M6 8 deep: can be fitted on all sides (end face only on size 5). Other lube fittings will have different dimensions. For more details on lube fittings, see the Accessories section in the main Roller Rail Systems catalog. d) Due to manufacturing reasons, guide rails in accuracy class H may not have a groove on the base. Size Dimensions (mm) A A 1 A A 3 B B 1 B B 3 d 8 d 8. E 1 E E 8 E 8. E 9 E 9. 5 48 4 3 1.5 19. 81.5 111. 115 6 5 35 5 33.4 4. 8.3 1.4 35 7 35 34 18. 138. 13.6 14. 1 6 5 5 7 5.3 56.6 13.1 9.1 86 43.5 17.5 134. 176.5 183 8 6 6 8 6.9 69. 16.7 36.5 1 5 53 3.5 5.5 16.1 9.5 16 1 6 75 95 74. 81.6 18.85 4.75 Size Dimensions (mm) Weight H H 1 H 1) H ) K 1 K N 3 N ±.5 6 S S 5 S 3) 9 T 4) V 1 (kg) 5 36 3 3.6 3.4.6 8 5.5 14.3 M6 7 M3-5deep 3. 7.5.8 35 48 41 31.1 3.8. 4.4 1 7. 19.4 M8 9 M3-5deep 4. 8. 1.6 6 51 39.1 38.8 33.7 36.6 15 8..4 M1 14 M4-7deep 5.5 1. 3.1 7 58 47.85 47. 41.5 44.4 17 9. 8.7 M1 16 M5-8deep 6. 1. 4.9 1) Dimension H with cover strip ) Dimension H without cover strip 3) Thread for attachments 4) Dimension T = hole spacing in the guide rail
14 Bosch Rexroth AG Roller Runner Blocks SNS/SLS/FXS R31EN 315 (1.9) Standard Roller Runner Blocks made of steel Roller Runner Blocks FXS R1854... 1 Flanged, extra long, standard height Corrosion-resistant runner blocks, Resist CR, matte silver hard chrome plated, on request. Size Accuracy Part numbers for preload class class C C3 65 H R1854 63 1 P R1854 6 1 R1854 63 1 SP R1854 61 1 R1854 631 1 UP R1854 69 1 R1854 639 1 Preload classes C = preload 8 % C (preferred) C3 = preload 13 % C Note on dynamic load capacities and moments (see table) Determination of the dynamic load capacities and moments is based on a travel life of 1 m as per ISO 1478-1. Often only 5 m are actually stipulated. For comparison: Multiply values C, M t and M L from the table by 1.3. Size Load capacities (N) Load moments (Nm) C C M t M t M L M L 65 366 8 79 8 13 3 8 17 13 38 8 9
R31EN 315 (1.9) Roller Runner Blocks SNS/SLS/FXS Bosch Rexroth AG 15 Standard Roller Runner Blocks FXS R1854... 1 E 8. S E 9 8 S S d 8 S 1 S 1 V 1 N N 1 E 9 E 9. H 1 H K 11 B d 8. H N 6 A 3 A ØS 5 B A 1 A c) T B 3 a) K 1 B 1 E E a) For O-ring: open lube bore as required. b) Lube nipple, thread M6 8 deep: can be fitted on all sides (end face only on size 5). Other lube fittings will have different dimensions. For more details on lube fittings, see the Accessories section in the main Roller Rail Systems catalog. c) Due to manufacturing reasons, guide rails in accuracy class H may not have a groove on the base. E 1 b) Size Dimensions (mm) A A 1 A A 3 B B 1 B B 3 d 8 d 8. E 1 E E 8 E 8. E 9 E 9. 65 17 85 63 53,5 335 75 339,5 3 8 8 14 35, 16, 9,3, Size Dimensions (mm) Weight H H 1 H 1) H ) K 1 K N 1 N N ±,5 6 S 1 S S 5 S 3) 9 T 4) V 1 (kg) 65 9 76 58,15 57,85 49,5 5,5 3 1,5 9,3 36,5 14,5 M16 18 M4-7tief 75, 15,,3 1) Dimension H with cover strip ) Dimension H without cover strip 3) Thread for attachments 4) Dimension T = hole spacing in the guide rail
Bosch Rexroth AG Linear Motion and Assembly Technologies Ernst-Sachs-Straße 1 9744 Schweinfurt, Germany Tel. +49 971 937- Fax +49 971 937-75 www.boschrexroth.com/dcl Find your local contact person here: www.boschrexroth.com/addresses-dcl Subject to technical modifications Bosch Rexroth AG 1 Printed in Germany R31EN 315 (1.9) EN DC-IA/MKT