Release Note MDA V7.0.0 Hotfix 10 Copyright (c) 2011 ETAS GmbH All Rights Reserved =============================================================== Release: 11th February, 2013 =============================================================== Thank you for using our products. This file contains important information. We strongly recommend that you read the entire document. For additional important information read the corresponding readme documents and MDA documentation. We welcome your comments and suggestions. Important Information This hotfix supports the efficient usage of MDA. This hotfix runs on Windows 7 machines, in addition to WINDOWS VISTA SP2 and WINDOWS XP SP2 or SP3 machines. It also contains the most current bug fixes for MDA. The functionality of the bug fixes has been thoroughly tested. However, this hotfix has not been subject to the complete release tests of MDA. Therefore, it is not possible to guarantee the usual high quality standards for this hotfix. ETAS GmbH accepts no further obligation in relation to this hotfix. Installation - Minimum requirement: MDA V7.0.0 installed - Shutdown all running applications (Especially all ETAS applications have to be closed) - Start the hotfix installation Release Note MDA V700 HF10.doc. Seite 1 von 7
Bug fixes Each new hotfix contains all corrections released in previous hotfixes. The malfunctions listed below have been fixed in MDA V7.0.0 HF 10. MDA V7.0.0 HF 1 1) EHI Id. 98945 - MDA 7.0 - CCD Plug-in support 2) EHI Id. 98946 - MDA 7.0 - Scrolling table for mf4 format causes problems 3) EHI Id. 1004382 - MDA 7.0 - MDA hangs when signals added to scope and then perform search in Help 4) EHI Id. 2010404112 - EW_MDA630: Printing a xy-osci containing a long measurement is not possible 5) EHI Id. 2010407100 - EW_M700 Measure files from Drive Recorder NG cannot be opened 6) EHI Id. 2011400388 - EW_M700 Generate ASCII measure file fails if file contains calculated signals 7) EHI Id. 2011400472 - EW_M700 ASCII files are extremely slow 8) EHI Id. 99087 - MDF-IP V1.0: MDF interface enhancement for CCD plug-in 9) EHI Id. 99171 - MDF-IP V1.0: Wrong HResult for MoveNext on IRecordStream 10)EHI Id. 99234 - MDF-IP V1.0: SeekByMasterChannel has a problem 11)EHI Id. 99602 - MDF-IP V1.0: ASCII file cannot be loaded by MDA on some PCs 12)EHI Id. 99690 - MDF-IP V1.0: MDA Display Window issue MDA V7.0.0 HF 2 1) EHI Id. 2011402646 - Configuration cannot be saved MDA V7.0.0 HF 3 Not released Release Note MDA V700 HF10.doc. Seite 2 von 7
MDA V7.0.0 HF 4 1) EHI Id. 2011400522 - EW_M700: VSD: Variable names are not sorted 2) EHI Id. 2011401426 - EW_M700: Global Option "From - To Decimal Setting" does not work 3) EHI Id. 2011402041 - EW_M700 Recorded Calibration is not displayed 4) EHI Id. 2011402139 - EW_M700 X-axis of XY-ocilloscope is not correctly loaded 5) EHI Id. 2011402997 - EW_M700: Opening of MDA after snapshot function in I700 using trigger function program will crash MDA V7.0.0 HF 5 1) EHI Id. 280989 - MDA700Beta20_ Data file Replacement cause error "Invalid operation", when data file path contains Chinese characters 2) EHI Id. 281359 - EW_M700 Autoscale does not work for x-axis 3) EHI Id. 281363 - EW_M700<?: Timestamp and Cursorvalue do not match 4) EHI Id. 308791 - Adapt code in MDA7 according to fix in MDFLib for Setting/Getting of Start Time/Time Offset & DST (Ref. #100649) 5) EHI Id. 309358 - EW_M700: wrong values visualized 6) EHI Id. 309534 - EW_M700 Virtual master channel not working 7) EHI Id. 310934 - EW_M700 Signal disappears zooming in 8) EHI Id. 311408 - EW_M700 measurement could not displayed in the osci 9) EHI Id. 311566 - MDFLib - IRecordStream->SeekByMasterChannel() returns 0x80040300 - "invalid vector<t> subscript" 10)EHI Id. 311743 - EW_M700 Offset is not applied on generated data 11)EHI Id. 311847 - MDA700 - Improve scrolling and zooming performance when working with CCD plug-in 12)EHI Id. 312345 - EW_M700 HF 5_TX_MDA: Default file format selection in the global option does not match with OnC, VSD, Generate measure file dialog box 13)EHI Id. 322948 - EW_M700HF5_TI_MDA: ASCII files generated does not have the correct time stamp and date 14)EHI Id. 322954 - EW_M700HF5_TX_MDA: Mf4 Measure file details are not shown once we modify the comment in Measure file comment window Release Note MDA V700 HF10.doc. Seite 3 von 7
MDA V7.0.0 HF 6 1) EHI Id. 311064 - EW_M700 / 4 Snapshot function in INCA leads already loaded MDA configuration to overwriting the currently used configuration 2) EHI Id. 311247 - EW_I700: MDF3 files from INCA V7 do not include the "Description" field for variables 3) EHI Id. 311742 - EW_M700 Measure file from ASCET V5.2.2 is wrongly interpreted 4) EHI Id. 323957 - EW_M700 Measurement file comment change in MDA changes the date/time displayed with MDF Shell extension 5) EHI Id. 324648 - EW_M700 A larger measurement file recorded with INCA V7.0.0 and with empty data groups cannot be used with MDA V7.0.0 6) EHI Id. 324798 - EW_M700:ASCII-Files cannot be used in MDA 7) EHI Id. 324833 - EW_M700 Not possible to generate ascii file from MDR when it contains a calculated signal 8) EHI Id. 324834 - EW_M700 Not possible to generate *dat file from MDR when it contains a calculated signal 9) EHI Id. 324973 - EW_M7007/5 Open a measurement file MDA crashes 10)EHI Id. 325974 - EW_M700: MDA sorts signal list alphabetically after one signal was removed 11)EHI Id. 326033 - EW_M700: ASCII Files will not include Constants generated with Calculated Signal or coming from Formula Editor MDA V7.0.0 HF 7 1) EHI Id. 324043 - MDA: Opening data file changes the date/time stamp of the folder 2) EHI Id. 324917 - EW_M700: MDA hangs when trying to open the measurement file from CD 3) EHI Id. 327977 - EW_M6.3.0 The scaling of the time axis is not included in the printout. 4) EHI Id. 328186 - EW_M700/5>?: Export to ASCII incomplete 5) EHI Id. 329965 - EW_M700 MDA writes "dot" instead of "Comma" into the ASCII file if selected language is "German" Release Note MDA V700 HF10.doc. Seite 4 von 7
MDA V7.0.0 HF 8 1) EHI Id. 330221 - EW_M700 Error message pops up on opening the dialog open file and configure MDA V7.0.0 HF 9 1) EHI Id. 329921 - EW_M700 Generate Measure File from MDR window fails 2) EHI Id. 330986 - EW_M700 measure file is inconsistent 3) EHI Id. 330989 - EW_M700 generate Measure file fails 4) EHI Id. 333007 - Replace function not working when type of signal is different (CCD issue) 5) EHI Id. 333341 - EW_M700: Unclear information dialog while starting of MDA from INCA-EE 6) EHI Id. 333348 - EW_M700: Unclear information dialog after start of MDA from INCA 7) EHI Id. 336665 - EW_M700 Data Exchange problem with the current configuration XDA using other dat files with identical variables 8) EHI Id. 336904 - EW_M700 MDA ignorates the time shift in the basic statistics window MDA V7.0.0 HF 10 1) EHI Id. 338696 EW_M700: "Custom operation " is not found" message when adding any calculated signal in osci window 2) EHI Id. 339364 EW_M700/9 Generation of measure file fails 3) EHI Id. 336896 EW_M700: Crash on change colors 4) EHI Id. 338193 EW_M700 ASCII character not accepted in the filename 5) EHI Id. 338928 EW_M700 The measure file from the customer cannot be opened in MDA V7.0.0. 6) EHI Id. 339705 EW_M700: The values from ASCII file are displayed wrongly 7) EHI Id. 340182 error "Komponente für StandardDialog konnte nicht erzeugt werden" when trying to start MDA 8) EHI Id. 342858 MDA 7.0: Ascii file contains no data if calculated signal is included Release Note MDA V700 HF10.doc. Seite 5 von 7
9) EHI Id. 344304 MDA 7.0: Long load time of ASCII file with several samples and no user indication 10) EHI Id. 345387 MDA 7.0: Problem with bits exporting in ASCII file from MDA 11) EHI Id. 344142 EW_MDA700: difference between the ascii file generated by MDA7 in comparison with MDA6 regarding the pauses 12) EHI Id. 344594 EW_M700 Failed measure data after conversion from ASCII to MDF format (.dat) Release Note MDA V700 HF10.doc. Seite 6 von 7
Contacting ETAS Europe (except France, Belgium, Luxemburg) +49-711-89661-315 mailto: inca.hotline.de@etas.com France, Belgium, Luxemburg +33-1-5670-0234 mailto: support.fr@etas.com Great Britain +49-711-89661-315 mailto: inca.hotline.de@etas.com USA +1-888-ETASINC (382-7462) mailto: support.us@etas.com Japan +81-(45)-222-0950 mailto: inca.hotline.jp@etas.com Korea +82(2)5742-231 mailto: inca.hotline.kr@etas.com China +86-21-5037-2220 ext.800 mailto: support.cn@etas.com India +91-80-4191-6400 mailto: support.in@etas.com Copyright and Trademark Attributions The data in this document may not be altered or amended without special notification from ETAS GmbH. ETAS GmbH undertakes no further obligation in relation to this document. The software described in it can only be used if the customer is in possession of a general license agreement or single license. Using and copying is only allowed in concurrence with the specifications stipulated in the contract. Under no circumstances may any part of this document be copied, reproduced, transmitted, stored in a retrieval system or translated into another language without the express written permission of ETAS GmbH. Copyright 2011 ETAS GmbH, Stuttgart The names and designations used in this document are trademarks or brands belonging to the respective owners. Release Note MDA V700 HF10.doc. Seite 7 von 7