Installation Guide V1.1 The information contained in this manual is the licensed property of Fujitsu Software Technology Corporation. Use of the information contained herein is restricted to the terms and conditions of a license agreement. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
REVISION NOTICE This is the second release of this manual. A complete revision history is provided at the end of the manual. ABSTRACT The Softek Storage Manager Installation Guide provides a brief overview of the installations procedures for Softek Storage Manager, including UNIX Agents. FOR FURTHER INFORMATION If you wish to obtain further information about the Fujitsu Software Technology Corporation product discussed in this publication, contact your Fujitsu Software Technology Corporation marketing representative, or write to Fujitsu Software Technology Corporation, Marketing Communications, Mail Stop 215, P.O. Box 3470, Sunnyvale, CA 94088-3470. RESTRICTIONS ON USE The information contained in this manual is the licensed property of Fujitsu Software Technology Corporation. Use of the information contained herein is restricted pursuant to the terms and conditions of a license agreement. Microsoft, Windows, Windows NT, and SQL Server are registered trademarks of Microsoft Corporation in the United States and other countries. Solaris is registered trademark of Sun Microsystems, Inc. in the United States. HP-UX is registered trademark of Hewlett-Packard Company. UNIX is registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. AIX is registered trademark of IBM Company. All other trademarks and product names are the property of their respective owners. Copyright(c) 2002 Fujitsu Limited. All rights reserved. Copyright (c) 2002 Fujitsu Software Technology Corporation. All rights reserved. All specifications are subject to change without notice. ii LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
CONTENTS CHAPTER 1: Installation on Windows.................... 1 Installation Requirements.................................... 3 Storage Manager Server................................... 3 Hardware Requirements............................................ 3 Software Requirements............................................. 3 Recommendations................................................. 4 Windows Agent.......................................... 4 Software Requirements............................................. 4 Solaris Agent............................................ 4 Software Requirements............................................. 4 HP-UX Agent............................................ 4 Software Requirements............................................. 4 AIX Agent............................................... 4 Software Requirements............................................. 4 Installing Softek Storage Manager............................. 4 Modificating Softek Storage Manager........................... 9 Configuring NetWorker...................................... 9 CHAPTER 2: Installation of UNIX Agents................. 15 Installing a UNIX Agent on Solaris 7 or Higher.................. 17 Installing a UNIX Agent on AIX 4.3.3 or Higher.................. 19 Installing a UNIX Agent on HP-UX 11 or Higher.................. 20 CHAPTER 3: Registering Licenses...................... 23 Finding your Host ID....................................... 25 Installing your Software Licenses............................. 26 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION iii
CHAPTER 4: MS SQL Installation....................... 29 Installing MS SQL Server 2000................................ 31 Installing MS SQL Service Pack 2............................. 39 CHAPTER 5: Troubleshooting and Modifying............. 45 Troubleshooting........................................... 47 Repairing Softek Storage Manager.......................... 47 Modifying Softek Storage Manager Components................. 48 Installing Additional Components.......................... 49 Uninstalling a Softek Storage Manager component............ 51 Uninstalling Softek Storage Manager Completely:............. 54 iv LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Figures Welcome Screen............................................... 5 Choose Destination Location Screen................................ 5 Select Features Screen.......................................... 6 Server Configuration Screen...................................... 7 Agent Configuration Screen....................................... 7 Start Copying Files Screen....................................... 8 Setup Status Screen............................................ 8 InstallShield Wizard Complete Screen............................... 9 NetWorker Main Window........................................ 10 Pools Screen................................................. 10 Create Pool.................................................. 11 NetWorker Main Window........................................ 11 NetWorker Clients Screen....................................... 12 Preferences Dialog Box......................................... 12 Solaris Install................................................. 16 System Settings Tab........................................... 37 Start/Stop/Reread............................................. 39 SSMLicense.lic................................................ 40 Start/Stop/Reread............................................. 41 MS SQL Server 2000 Installation - Main Screen...................... 45 MS SQL Server 2000 Installation - Component Selection............... 46 MS SQL Server 2000 Installation - Welcome Screen.................. 46 MS SQL Server 2000 Installation - Computer Name................... 47 MS SQL Server 2000 Installation - Installation Selection................ 47 MS SQL Server 2000 Installation - User Information................... 48 MS SQL Server 2000 Installation - License Agreement................. 48 MS SQL Server 2000 Installation - Installation Definition............... 49 MS SQL Server 2000 Installation - Instance Name.................... 49 MS SQL Server 2000 Installation - Setup Type....................... 50 MS SQL Server 2000 Installation - Services Accounts................. 50 MS SQL Server 2000 Installation - Authentication Mode................ 51 MS SQL Server 2000 Installation - Copying Files..................... 51 MS SQL Server 2000 Installation - Choose Licensing Mode............. 52 MS SQL Server 2000 Installation - Setup Complete................... 52 MS SQL Service Pack 2 Installation - Welcome Screen................ 53 MS SQL Service Pack 2 Installation - Computer Name................. 54 MS SQL Service Pack 2 Installation - License Agreement.............. 54 MS SQL Service Pack 2 Installation - Instance Name.................. 55 MS SQL Service Pack 2 Installation - Connect to Server............... 55 MS SQL Service Pack 2 Installation - Copying Files................... 56 MS SQL Service Pack 2 Installation - Microsoft Data Access Components. 56 MS SQL Service Pack 1 Installation - Setup Complete................. 58 Repairing Softek Storage Manager................................ 62 Modifying Softek Storage Manager Components..................... 63 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION v
Select Features Screen......................................... 64 Server Configuration Screen...................................... 64 Agent Configuration Screen...................................... 65 Modifying Softek Storage Manager Components...................... 66 Select Features Screen......................................... 67 Agent Configuration Screen...................................... 67 vi LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
About This Guide Audience This guide provides basic steps for installing and configuring Softek Storage Manager and the UNIX Agents. The Softek Storage Manager Installation Guide is designed system and network administrators and managers, who want to use Fujitsu Softek Storage Manager to manage their storage resources performance. Contents of this Manual Chapter/Appendix Installation on Windows Installation of UNIX Agents Installing The Mainframe Agent Registering Licenses MS SQL Installation Troubleshooting and Modifying Description An outline of the steps and procedures needed to install Softek Storage Manager on Windows-based systems. An outline of the steps and procedures needed to install Agents on Solaris, HP-UX, and AIX systems. An outline of the steps and procedures needed to install a Mainframe Agent. How to acquire and register your Softek Storage Manager Software Licenses. An appendix providing and outline of the steps and procedures needed to install MS SQL software. An appendix providing basic steps to be taken in the event you have problems with Softek Storage Manager, and steps to take should you wish to install additional Softek Storage Manager components, or remove any or all Softek Storage Manager components. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION vii
SOFTEK About This Guide Notices The following notices are used throughout this manual. NOTE TIP Gives readers additional significant information about the subject to increase their knowledge or to guide their actions. Helps users apply the techniques and procedures described in the text to their specific needs.! CAUTION: Alerts readers to a situation that could damage the software or interrupt operations. Related Publications The following publications contain related information: Title Softek Storage Manager Installation Guide Softek Storage Manager User Guide Softek Storage Manager Reports User Guide viii LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
1 Installation on Windows Installation Requirements 3 Installing Softek Storage Manager 4 Modificating Softek Storage Manager 9 Configuring NetWorker 9 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 1
This chapter is intended as a guide to installing and configuring Softek Storage Manager on Windows. Softek Storage Manger is protected by a Software Licence. In order to operate legally purchased versions of Softek Storage Manager, you must first register your product with Fujitsu Softek, using the procedures outlined in Chapter 3: Registering Licenses. Softek Storage Manager will not work until you do so.! CAUTION: A temporary Software Licence has been installed by your Fujitsu Softek representative. This Software Licence is used only to launch the registration process. It is not an actual Software license. Installation Requirements The following are the minimum requirements in order to install Softek Storage Manager: Storage Manager Server Hardware Requirements 1 GHz Processor 40 GB Hard Disk, NTFS format 1 GB RAM SVGA (1024 x 768) Accelerated 100Mb NIC Card Single processor softek.fujitsu.com Chapter 1 Installation Requirements! CAUTION: In general, installing a Softek Storage Manager Server, with an Agent, requires approximately 100 MB of free space. During some installations, a message may appear, warning you that you are running out of space. Ensure that you have the required 100 MB before continuing. NOTE Fujitsu Softek strongly recommends that you install ECC memory on the Softek Storage Manager Server. Approximately, 1 GB of memory is needed. Software Requirements Microsoft Windows 2000 Server, Service Pack 2 (English version) Microsoft MS SQL Server 2000 with Service Pack 2. For installation instructions, please refer to MS SQL Installation. Microsoft MS IIS Server (for remote reporting) LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 3
Internet browser, either Internet Explorer 5.5+ or Netscape 6.0+ SOFTEK Chapter 1 Installing Softek Storage Manager NOTE Recommendations Dedicated server for Softek Storage Manager Support for up to ten servers Single configuration, single user Windows Agent Software Requirements Windows 2000 Server or Client, with Service Pac k 2, or Windows NT v4.0 with Service Pack 6a Solaris Agent Software Requirements Sun Solaris v2.7 or 2.8 HP-UX Agent Software Requirements It is recommended that all previous versions of MS-SQL Server (for example, 6.5, 7.0) be removed from your computer before installing the newer versions. HP-UX v11 or v11i AIX Agent Software Requirements AIX v4.3.3 Installing Softek Storage Manager The following section describes how to install Softek Storage Manager from the installation CD. " To install Softek Storage Manager: 1. Launch the Softek Storage Manager InstallShield Wizard by inserting the Softek Storage Manager CD into your CD-ROM. The Softek Storage Manager CD will automatically begin the installation process. Wait a few moments while the InstallShield wizard prepares the installation process. The Welcome Screen appears. Click Next. 4 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Welcome Screen Chapter 1 Installing Softek Storage Manager softek.fujitsu.com 2. The Choose Destination Location Screen appears. If you would like to install Softek Storage Manager in a location other than the default option, click on the Browse button. Otherwise, click Next. NOTE No matter what location you decide to install Softek Storage Manager in, a directory entitled Space Manager will be appended onto your directory path. Choose Destination Location Screen LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 5
SOFTEK 3. The Select Features Screen appears. Use this screen to select the Softek Storage Manager components you wish to install on this machine. You may install the Softek Storage Manager Server, or Agent, or both. Click Next. NOTE It is recommended that you install the Softek Storage Manager Server first. It is also recommended that you have a server dedicated to just Softek Storage Manager. Select Features Screen Chapter 1 Installing Softek Storage Manager 4. If you selected Softek Storage Manager Server in the previous step, the Server Configuration Screen appears. This screen allows you to configure the e-mail alerts options available in Softek Storage Manager. Fill in the following fields and click Next. - The E-Mail Sender field identifies Softek Storage Manager as the source of the alert message. The name you enter here will be the name appearing in the From section of the e-mail alert. - The SMTP Server of Sender field identifies the name or IP address of the server that handles your network s e-mail. - The Console Reports URL field provides the HTML address needed for displaying Softek Storage Manage reports, and is in the following format: http://<network Computer Name>/Softek_Storage_Manager/index.asp 6 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Server Configuration Screen softek.fujitsu.com 5. If you selected Agent in the Select Features Screen, the Agent Configuration Screen appears. Enter in the name of the Softek Storage Manager Server. Click Next. If you also selected Server in the Agent Configuration Screen, the Storage Manager Server name will already be entered. Agent Configuration Screen Chapter 1 Installing Softek Storage Manager 6. The Start Copying Files Screen appears. Verify that all the information displayed in this screen is correct, and click Next. Click Back if you want to change some of the installation parameters displayed here. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 7
Start Copying Files Screen Chapter 1 Installing Softek Storage Manager SOFTEK 7. The Setup Status Screen appears. Softek Storage Manager will begin installing the selected components on your machine. At any time you may click Cancel to end the installation process. If you do so, the selected components will not be installed. Setup Status Screen 8. When the selected components are installed, the InstallShield Wizard Complete Screen appears. Click Finish. You will be asked whether or not you wish to reboot your machine. It is recommended that you do so. At this point, the Softek Storage Manager Agents and 8 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Data Collector begin collecting Storage information. CAUTION: Please execute the following commands in Modificating Softek Storage Manager after Installing Softek Storage Manager. InstallShield Wizard Complete Screen softek.fujitsu.com Modificating Softek Storage Manager 1. Open up a command prompt and go to the directory. inetpub\wwwroot\softek_storage_manager\adminscripts Chapter 1 Modificating Softek Storage Manager 2. Then type the following command from the prompt. cscript mkvirtdir.vbs -c localhost -w Default Web Site -v Softek_Storage_Manager, <inetpubdrive>:\inetpub\wwwroot\softek_storage_manager, Softek_Storage_Manage r 3. Go to the directory. inetpub\wwwroot\softek_storage_manager\appdictionary 4. Enter the command AppDictionary 5. Open Internet Service Manager and restart IIS. Configuring NetWorker LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 9
SOFTEK NetWorker is a product that allows for the backing up and recovery of data across your entire network. In order to ensure that Softek Storage Manager s archiving, and archive deleting commands work properly, you must now configure your NetWorker server and NetWorker Clients. Doing so allows for the necessary communication between Softek Storage Manager Agents, NetWorker Clients, and the server machines for both Softek Storage Manager, and NetWorker. There are two procedures that must be followed to configure NetWorker properly: 1. Mounting and configuring NetWorker devices 2. Configuring NetWorker Clients Chapter 1 Configuring NetWorker " To mount and configure a NetWorker device: 1. Navigate to your NetWorker Main Window. Typically, this can be found by clicking Start>Programs>NetWorker Group>NetWorker Administrator. NetWorker Main Window 2. In the Media Management column, click on Manage Pools, to bring up the Pools Screen. 10 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Pools Screen softek.fujitsu.com 3. Right-click Pools to bring up the Pools Context Menu, and then click Create. 4. In the Create Pools dialog box, select Archive in the Pool Type field. Configure the rest of the dialog. Chapter 1 Configuring NetWorker Create Pool 5. Click OK. You must now configure your NetWorker Clients. " To configure NetWorker Clients: 1. In the Client Operations column, click Manage Clients. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 11
NetWorker Main Window Chapter 1 Configuring NetWorker SOFTEK 2. The NetWorker Clients Screen appears. Select a client machine that has a Softek Storage Manager Agent installed on it. NetWorker Clients Screen 3. Select the Preferences tab, to bring up the Preferences Dialog Box. - Ensure that the Archived services field is Enabled. - Ensure that Administrators is in the Archive user List. This function will not work if Administrators is not one of the names entered in this field. Administrators is case-sensitive. 12 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Preferences Dialog Box Chapter 1 Configuring NetWorker softek.fujitsu.com 4. Click OK. For more information on using and configuring NetWorker, refer to your NetWorker documentation. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 13
Chapter 1 Configuring NetWorker SOFTEK 14 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
2 Installation of UNIX Agents Installing a UNIX Agent on Solaris 7 or Higher 17 Installing a UNIX Agent on AIX 4.3.3 or Higher 19 Installing a UNIX Agent on HP-UX 11 or Higher 20 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 15
This chapter is intended as a guide to installing and configuring different UNIX agents. Softek Storage Manger is protected by a Software Licence. In order to operate legally purchased versions of Softek Storage Manager, you must first register your product with Fujitsu Softek, using the procedures outlined in Chapter 3: Registering Licenses. Softek Storage Manager will not work until you do so.! CAUTION: A temporary Software Licence has been installed by your Fujitsu Softek representative. This Software Licence is used only to launch the registration process. It is not an actual Software license. Installing a UNIX Agent on Solaris 7 or Higher Softek Storage Manager Space Agent is installed with the Solaris pkgadd command. NOTE If you are using Solaris 7, before installing the agent, the Kernel patches 107544-03 and 106541-19 must be installed. " To install a UNIX Agent on Solaris: 1. Configure your account as root user. 2. Insert and mount the Softek Storage Manager - Space Manager CD-ROM. Enter in the following command, where x is equal to your version number (7 or 8): Change directory to /<mounted directory>/unix/solaris/5.x 3. Type the following command: pkgadd -d sftksrm.s5x 4. The following message appears: The following packages are available: 1 SFTKSrmSp SRM SpaceManager (sparc)1.1 softek.fujitsu.com Chapter 2 Installing a UNIX Agent on Solaris 7 or Higher Select package(s) you wish to process (or all to process all packages). (default: all) [?,??,q]:1 Enter 1. 5. The following message appears: Enter the SSM Network name or SSM IP address: [?,q] Enter in either the IP address for the Softek Storage Manager Server, or the Softek Storage Manager Server name. Press Enter. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 17
SOFTEK Chapter 2 Installing a UNIX Agent on Solaris 7 or Higher 6. The following message appears: Enter SSM DATA COLLECTOR PORT number, default [1-65535], [3222]: Press Enter to select the default port number, or enter an alternate port number. NOTE If you specify a port number other than the default of 3222, you must also enter that port number in the Configuration Tool Systems menu. It is not entered automatically. You must make provisions for firewall or proxy settings to allow TCP/IP connections through the selected port. Solaris Install " To verify that installation has completed successfully: Type the following command: pkginfo grep SFTK " To start the UNIX Agent on Solaris: Enter in the following command: /etc/init.d/sftksrmsp_startdaemons start! CAUTION: UNIX Agents will not start automatically. Unless you manually start the UNIX Agent, your Softek Storage Manager UNIX Agent will not begin collecting data. 18 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
" To uninstall a UNIX Agent on Solaris: Type the following command: pkgrm SFTKSrmSp Installing a UNIX Agent on AIX 4.3.3 or Higher " To install a UNIX Agent on AIX: 1. Configure your account as root user. 2. Insert and mount the Softek Storage Manager - Space Manager CD-ROM. Enter in the following command: Change directory to /<mounted directory>/unix/aix/4.3 3. Use the following command to launch the installation process:./install.sh 4. The following message appears: Enter the SSM Network name or SSM IP address Enter either the IP address for the Softek Storage Manager Server, or the Softek Storage Manager Server name. Press Enter. 5. The following message appears: Enter DATA COLLECTOR PORT number, default [1-65535], [3222]: Press Enter to select the default port number, or enter an alternate port number. NOTE You must make provisions for firewall or proxy settings to allow TCP/IP connections through the selected port. 6. The following message appears: Do you want to continue with the installation of <SFTKSrmSp> [y, n,?] 7. Enter y. Enter y to start the SFTKSrmSp daemon. The following message indicates that the installation completed successfully: softek.fujitsu.com Chapter 2 Installing a UNIX Agent on AIX 4.3.3 or Higher LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 19
SOFTEK Chapter 2 Installing a UNIX Agent on HP-UX 11 or Higher " To verify that installation has completed successfully: Type the following command: lslpp - l grep SFTK " To start the UNIX Agent on AIX: Enter in the following command: /etc/sftksrmsp/init.d/sftksrmsp_startdaemons start! CAUTION: UNIX Agents will not start automatically. Unless you manually start the UNIX Agent, your Softek Storage Manager UNIX Agent will not begin collecting data. " To uninstall a UNIX Agent on AIX 1. Change your directory to: /opt/sftksrmsp/bin 2. Enter the following command:./uninstall.sh Installing a UNIX Agent on HP-UX 11 or Higher " To install an HP-UX Agent: 1. Configure your account as root user. 2. Insert and mount the Softek Storage Manager - Space Manager CD-ROM. Enter in the following command: Change directory to /<mounted directory>/unix/hpux/11 20 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Use one of the following commands to launch the installation process: swinstall -s <Package Directory> -x ask=true SRM_SP The following message appears: Enter the SSM Network name or SSM IP address Enter either the IP address for the Softek Storage Manager Server, or the Softek Storage Manager Server name. Press Enter. 3. The following message appears: Enter DATA COLLECTOR PORT number [1-65535], [3222]: Press Enter to select the default port number, or enter an alternate port number. NOTE Note that you must make provisions for firewall or proxy settings to allow TCP/ IP connections through the selected port. The following message indicates that the installation completed successfully. softek.fujitsu.com Chapter 2 Installing a UNIX Agent on HP-UX 11 or Higher " To verify that installation has completed successfully: Type the following command: swlist grep SRM_SP LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 21
SOFTEK Chapter 2 Installing a UNIX Agent on HP-UX 11 or Higher " To start the UNIX Agent on HP-UX: Enter in the following command: /sbin/init.d/sftk_srm_sp_startdaemons start! CAUTION: UNIX Agents will not start automatically. Unless you manually start the UNIX Agent, your Softek Storage Manager UNIX Agent will not begin collecting data. " To unistall a Unix Agent on HP-UX Type the following command: swremove SRM_SP 22 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
3 Registering Licenses Finding your Host ID 25 Installing your Software Licenses 26 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 23
Softek Storage Manager is protected by a Software License. In order to operate legally purchased versions of Softek Storage Manager, you must first register your product with Fujitsu Softek, using the procedures outlined in this chapter. Softek Storage Manager will not work until you do so.! CAUTION: A temporary Software License has been installed by your Fujitsu Softek representative. This Software License is used only to launch the license management service. It is not an actual Software license. The following procedures, outlined in this chapter, must be undertaken in order to purchase Softek Storage Manager Agent Licenses: Finding your Host ID Obtaining and Installing your Software Licences Finding your Host ID The first step that must be undertaken when obtaining Softek Storage Manager licenses is to find your Host ID. " To find your Host ID: 1. Launch Windows Explorer. 2. During the installation of Softek Storage Manager, FLEXlm was installed. FLEXlm is a tool used to aid in electronic license management. Navigate to, and click lmtools.exe, in the following folder: Program Files> Softek > Storage Manager > FLEXlm softek.fujitsu.com Chapter 3 Finding your Host ID 3. The LMTOOLS dialog box appears. Click the Systems Settings Tab, to bring up the System Settings Tab. System Settings Tab 4. Choose one of the values listed in the Ethernet Address field. Each value is a twelve digit, hexadecimal number (numbers and letters). Multiple values are separated by spaces. You only need one value. Write this value down on a piece of paper. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 25
SOFTEK Installing your Software Licenses Once your Softek Storage Manager purchase has been processed, you will receive the Softek Storage Manager Licenses you have purchased. " To install a new license 1. Save your licenses in the following directory: <Drive>:\Program Files\Softek\Storage Manager\FLEXlm Save your licenses under the name: Chapter 3 Installing your Software Licenses SSMLicense.lic! CAUTION: If an old SSMLicense.lic file exists, it should be overwritten, unless your are adding licenses to an already purchased product. If you Save this file as a Text Document, a.txt. extension will be added to the file; it is recommended that you save it using All Files as File type. 2. Navigate to and click lmtools.exe, in the following folder: <Drive>:\Program Files\Softek\Storage Manager\FLEXlm, 3. The LMTOOLS dialog box opens. Click the Start/Stop/Reread tab. Start/Stop/Reread 4. Select SoftekSSMLicenseManager, and then click the Reread License File button. NOTE To verify your the reread procedure, click the Config Services tab, and then View Log button. You should see, at the end of the log file, a message saying Finished rereading. Click the Close Log button to exit. To complete your License Registration, you will need to do one of the following: Reboot your machine 26 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Stop the Softek Process Monitor service, then stop the SoftekSSMLicenseManager service, then re-start the Softek Process Monitor. The SoftekSSMLicenseManager will restart automatically, once you re-start the Softek Process Monitor. softek.fujitsu.com Chapter 3 Installing your Software Licenses LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 27
Chapter 3 Installing your Software Licenses SOFTEK 28 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
A MS SQL Installation Installing MS SQL Server 2000 31 Installing MS SQL Service Pack 2 39 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 29
Installing MS SQL Server 2000 1. Insert the MS-SQL Server 2000, Personal Edition (English version) CD into your CD- ROM drive, and go to the Standard directory. 2. Double-click AUTORUN.EXE. 3. The MS SQL Server 2000, Standard Edition welcome screen opens. Click SQL Server 2000 Components. MS SQL Server 2000 Installation - Main Screen Appendix A Installing MS SQL Server 2000 softek.fujitsu.com 4. At the next screen, click Install Database Server. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 31
MS SQL Server 2000 Installation - Component Selection Appendix A Installing MS SQL Server 2000 SOFTEK 5. The MS-SQL Server installation wizard is launched. Click Next. MS SQL Server 2000 Installation - Welcome Screen 6. At the Computer Name screen, select Local Computer, then click Next. 32 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
MS SQL Server 2000 Installation - Computer Name Appendix A Installing MS SQL Server 2000 softek.fujitsu.com 7. At the Installation Selection screen, select Create a new instance of SQL Server, or install Client Tools. Click Next. MS SQL Server 2000 Installation - Installation Selection 8. At the User Information screen, enter the user name and company name in the appropriate fields. Click Next. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 33
MS SQL Server 2000 Installation - User Information Appendix A Installing MS SQL Server 2000 SOFTEK 9. Read the Software License Agreement displayed on the next screen. If you accept the terms and conditions as specified, click Yes. MS SQL Server 2000 Installation - License Agreement 10. At the Installation Definition screen, select Server and Client Tools, then click Next. 34 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
MS SQL Server 2000 Installation - Installation Definition Appendix A Installing MS SQL Server 2000 softek.fujitsu.com 11. At the Instance Name screen, leave Default checked if you want a default installation. Click Next. MS SQL Server 2000 Installation - Instance Name 12. At the Setup Type screen, select Typical for a common installation. If you wish to change the destination folder, click Browse and select the desired folder. Click Next. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 35
MS SQL Server 2000 Installation - Setup Type Appendix A Installing MS SQL Server 2000 SOFTEK 13. Select Use the same account for each service. In the Service Settings area, select Use the Local system account. Click Next. MS SQL Server 2000 Installation - Services Accounts 14. At the Authentication Mode screen, select Windows Authentication Mode and click Next. 36 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
MS SQL Server 2000 Installation - Authentication Mode Appendix A Installing MS SQL Server 2000 softek.fujitsu.com 15. Click Next to continue the installation, or Back if you wish to change the settings. MS SQL Server 2000 Installation - Copying Files 16. At the next screen, you need to choose the Licensing Mode. Select Per Seat for 1 device and click Continue. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 37
MS SQL Server 2000 Installation - Choose Licensing Mode Appendix A Installing MS SQL Server 2000 SOFTEK 17. You will be notified when the installation has completed. Click Finish to exit the wizard. MS SQL Server 2000 Installation - Setup Complete 38 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Installing MS SQL Service Pack 2 After installing MQ-SQL Server 2000, you must now install the MS-SQL Service Pack 2. 1. Insert the MS-SQL Server 2000 Service Pack 2 (English version) CD into your CD-ROM drive, and navigate to the following directory: \ENGLISH\SQL2000SP2\STANDARD\X86\SETUP. 2. Double click SETUPSQL.EXE. 3. The installation wizard of MS-SQL Server 2000 Service Pack 2 is launched. Click Next. softek.fujitsu.com MS SQL Service Pack 2 Installation - Welcome Screen 4. At the Computer Name screen, select Local Computer, then click Next. Appendix A Installing MS SQL Service Pack 2 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 39
MS SQL Service Pack 2 Installation - Computer Name Appendix A Installing MS SQL Service Pack 2 SOFTEK 5. Read the Software License Agreement displayed on the next screen. If you accept the terms and conditions as specified, click Yes. MS SQL Service Pack 2 Installation - License Agreement 6. At the Instance Name screen, click Next, accepting the default options. 40 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
MS SQL Service Pack 2 Installation - Instance Name Appendix A Installing MS SQL Service Pack 2 softek.fujitsu.com 7. At the Connect to Server screen, select Windows account information as authentication mode to connect to SQL Server. Click Next. MS SQL Service Pack 2 Installation - Connect to Server 8. Click Next to start copying the program files, or Back if you wish to change the settings. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 41
MS SQL Service Pack 2 Installation - Copying Files Appendix A Installing MS SQL Service Pack 2 SOFTEK 9. Click Finish to begin installing Microsoft Data Access Components. MS SQL Service Pack 2 Installation - Microsoft Data Access Components 42 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
10. Wait a few moments while the MS SQL Service Pack 2 installation completes. Appendix A Installing MS SQL Service Pack 2 softek.fujitsu.com 11. Click OK at the following message and perform the necessary actions after Step 11. 12. The installation is now complete. Click Finish to exit the wizard. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 43
MS SQL Service Pack 2 Installation - Setup Complete Appendix A Installing MS SQL Service Pack 2 SOFTEK! CAUTION: Before continuing with the installation of Softek Storage Manager, it is recommended that you reboot your computer at this time. 44 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
B Troubleshooting and Modifying Troubleshooting 47 Modifying Softek Storage Manager Components 48 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 45
Troubleshooting Should you encounter any problems while utilizing Softek Storage Manager, Fujitsu Softek recommends you follow these steps: 1. Consult the Software Installation and Release Notes for the latest information on known issues, bugs, and fixes. 2. Use Softek Storage Manager s Repair tool. For more information on using this tool, see Repairing Softek Storage Manager. If you call Technical Support, you may be asked to provide the build number for your particular version of Softek Storage Manager. " To find your build number: 1. In your Control Panel, click Add/Remove Programs. 2. Click Softek Storage Manager. 3. Click support information. Your build number can be found on the dialog box that appears. Repairing Softek Storage Manager Softek Storage Manager provides a tool which in certain cases may repair minor bugs. Fujitsu Softek recommends that you attempt to fix Softek Storage Manager using this function before calling Technical Support. softek.fujitsu.com Appendix B Troubleshooting " To use Softek Storage Manager s Repair function: 1. On the Softek Storage Manager server, insert the Softek Storage Manager CD, included with your original Softek Storage Manager Media Kit. 2. Navigate to the Control Panel, and click Add/Remove Programs. 3. Click Softek Storage Manager to highlight it, and then Change/Remove. Select Repair, as shown in LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 47
Repairing Softek Storage Manager SOFTEK Appendix B Modifying Softek Storage Manager Components 4. Softek Storage Manager will now attempt to repair any minor problems in its files. This may take several minutes. NOTE The Repair function does not modify the Softek Storage Manager Database. Therefor, all of your data, configurations and settings will remain intact. 5. Once completed, you may be asked whether you wish to reboot your computer. Fujitsu Softek recommends you do so at this time. Modifying Softek Storage Manager Components You may decide to uninstall Softek Storage Manager Agents and/or Servers from certain machines on your network, should you no longer wish to monitor them. You may also decide to install Softek Storage Manager components on other machines across your network, after you have completed the initial installation. Softek Storage Manager allows you to do so. There are three modifying procedures you can do with Softek Storage Manager: Install an additional component or components Uninstall a component from a certain computer Uninstall Softek Storage Manager completely 48 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Installing Additional Components After you have completed your initial Softek Storage Manager installation, you decide to modify your Softek Storage Manager environment, by installing an additional component on one of your computers. " To install an additional component: 1. Insert the Softek Storage Manager CD, included with your original Softek Storage Manager Media Kit. 2. On the Softek Storage Manager machine you wish to remove a component for, navigate to the Control Panel, and click Add/Remove Programs. 3. Click Softek Storage Manager to highlight it, and then Change/Remove. Select Modify, as shown in Modifying Softek Storage Manager Components. Modifying Softek Storage Manager Components 4. The Select Features Screen appears. Select the component(s) you wish to add by selecting the checkbox beside its name. Components with a check beside them, are already installed. Click Next. That component will be installed on the machine. softek.fujitsu.com Appendix B Modifying Softek Storage Manager Components! CAUTION: When it first appears, the Select Features Screen will display the current install status. Components with checks beside them are already installed. Removing a check from beside a component will cause that component to be UNINSTALLED. If you wish to keep the components that are already installed, leave the checkboxes as they are. Selecting a checkbox that is empty will INSTALL that component. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 49
Select Features Screen Appendix B Modifying Softek Storage Manager Components SOFTEK 5. The Server Configuration Screen will appear. If a Softek Storage Manager server is already installed, you may re-configure your Softek Storage Manager Server settings, if you desire. Click Next. Server Configuration Screen 50 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
6. If you are installing a Softek Storage Manager Agent, the Agent Configuration Screen appears. Enter in the name of the Softek Storage Manager Server you wish your agents to connect to. NOTE At least one Softek Storage Manager Server is needed in order for Softek Storage Manager to work. If you have more than one Softek Storage Manager Server, enter in the name of one those Servers. Agent Configuration Screen softek.fujitsu.com 7. Click Next to finish adding additional Softek Storage Manager components. Uninstalling a Softek Storage Manager component You may desire to uninstall a Softek Storage Manager component that was previously installed. Softek Storage Manager allows you to do so. " To uninstall a Softek Storage Manager component Appendix B Modifying Softek Storage Manager Components 1. Insert the Softek Storage Manager CD, included with your original Softek Storage Manager Media Kit. 2. On the Softek Storage Manager machine you wish to remove a component for, navigate to the Control Panel, and click Add/Remove Programs. 3. Click Softek Storage Manager to highlight it, and then Change/Remove. Select Modify, as shown in Modifying Softek Storage Manager Components. LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 51
Modifying Softek Storage Manager Components SOFTEK Appendix B Modifying Softek Storage Manager Components 4. The Select Features Screen appears. Select the component(s) you wish to clear the checkbox beside its name. Components with a check beside them, will remain installed. Click Next. That component will be removed from the machine.! CAUTION: When it first appears, the Select Features Screen will display the current install status. Components with checks beside them are already installed. Removing a check from beside a component will cause that component to be UNINSTALLED. If you wish to keep the components that are already installed, leave the checkboxes as they are. Selecting a checkbox that is empty will INSTALL that component. 52 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION
Select Features Screen Appendix B Modifying Softek Storage Manager Components softek.fujitsu.com 5. If you are removing a Softek Storage Manager Server, the Agent Configuration Screen will appear. Enter in the name of the new Softek Storage Manager Server you wish your agents to connect to. NOTE At least one Softek Storage Manager Server is needed in order for Softek Storage Manager to work. If you are removing your only Softek Storage Manager Server, you will need to install another one someplace else. If you have more than one Softek Storage Manager Server, enter in the name of one those Servers. Agent Configuration Screen LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION 53
6. Softek Storage Manager will remove the requested components. This may take several minutes. SOFTEK Appendix B Modifying Softek Storage Manager Components Uninstalling Softek Storage Manager Completely: Softek Storage Manager may be removed in its entirety from a computer " To uninstall Softek Storage Manager completely: 1. On the Softek Storage Manager machine you wish to remove a component for, navigate to the Control Panel, and click Add/Remove Programs. 2. Click Softek Storage Manager to highlight it, and then Change/Remove. 3. Select Remove. 4. Click Softek Reporter to highlight it, and then Change/Remove. 5. Select Remove. 6. Click on Start>Setting>Control Panel>Administrative Tools>Internet Services Manager. 7. Select Default Web Site and then select Softek_Storage_Manager virtual directory. 8. Select Delete from Action Menu. 54 LICENSED MATERIAL - PROPERTY OF FUJITSU SOFTWARE TECHNOLOGY CORPORATION