Source: STATICE JULY 11-12, 2016, BESANÇON, FR HEALTH BUSINESS CONNECT Micro & Nano MEETS Medical Innovation
Health Business Connect Micro & Nano MEETS Medical Innovation Dear Sir or Madam, Furthering cooperation between component manufacturers and medical device manufacturers from Germany and France as well as joint projects, experience exchange and potential opportunities for cooperation are the focal point of the two-day, English-language event. Talks, discussions and company presentations will focus on current issues regarding medical device components like diagnostic sensors, integration technology in wearables, microfluidic parts for Point-of-Care-Analytics (PoC) and Lab-on-Chip, and electronic components for integration in medical devices. In addition, secondary topics like software requirements and digitalization will be featured as well. The program is rounded out with company visits at the Temis Technology Park, on-site B2B meetings, a guided tour through Besançon and a networking event in the evening of the first conference day. The event is aimed at medical technology companies on the entire value chain: technology developers, component manufacturers, software, test and analysis businesses and medical device manufacturers alike will find great opportunities for cooperation and networking. We look forward to seeing you at Health Business Connect! Dr. Thomas R. Dietrich Pierre Vivien, Benoît Studlé, Statice IVAM Microtechnology Pôle de compétitivité Network des Microtechniques
PROGRAM Monday, July 11, 2016 12.00 Lunch & company visit at Statice 14.00 Opening and introduction Ingolf Reischel, Jenoptik Polymer Systems GmbH, Triptis, DE Matthias Lorenz, AEMtec GmbH, Berlin, DE Companies present their experiences: Requirements on manufacturers of components for medical devices 14.15 Ralf Staud, KARL STORZ GMBH & Co. KG, DE 14.30 Florent Guyon, Statice, Besançon, FR 14.45 Matthias Lorenz, AEMtec, Berlin, DE 15.00 Markus Ebster, z-microsystems, Dornbirn, AT 15.15 Claire Flipo, CG.Tec Injection, Frasne, FR 15.30 Discussion and incorporation into the White Paper 16.00/16.15 End of session/ Hotel Check-in/2-minute-walk to TEMIS 16.30 Welcome word by TEMIS Bruno Favier, TEMIS, Besançon, FR 16.35 Opening word by PMT Pierre Vivien, PMT, Besançon, FR 16.40 Introduction of IVAM Microtechnology Network Dr. Thomas R. Dietrich, IVAM Microtechnology Network, Dortmund, DE 16.50 Introduction of Innov Health Florent Guyon, Innov Health, Besançon, FR 17.00 IVAM & Innov Health members elevator pitches 17.30 FEMTO-ST/Biom @x visit Bruno Wacogne, FEMTO Lab, Besançon, FR 19.30 Dinner and networking
Tuesday, July 12, 2016 9.00 Business challenges between component and equipment manufacturers Benjamin Roussel, Yole Developpement, Villeurbanne, FR 9.30 Company Pitches 10.00 B2B-Meetings 12.00 Lunch and networking 14.00 Transfer to city centre 14.30 Guided tour through Besançon 17.00 End of event
APPLICATION Health Business Connect - Micro & Nano MEETS Medical Innovation Please send the reply form to Ms. Orkide Karasu: Email: ok@ivam.de Fax: +49 (0) 231 / 97 42-150 Hereby, I register for Health Business Connect (July 11-12) The conference fee is 449,00 if you register until May 27, 2016. The fee for registrations that reach us later is 599,00. This conference fee contains digital conference materials, drinks and snacks and an administration fee. I am member of IVAM or PMT and register as participant for Health Business Connect (July 11-12) The conference fee is 299,00 if you register until May 27, 2016. The fee for registrations that reach us later is 399,00. The conference fee already contains the costs of drinks and snacks. I am a partner member and register as participant for Health Business Connect (July 11-12) The conference fee is 399,00 if you register until May 27, 2016. The fee for registrations that reach us later is 539,00. The conference fee already contains the costs of drinks and snacks. Every further participant from the same company or institute will benefit from a discount of 50,00. Name, surname Company Address (for invoice) Phone Fax Email Value Added Tax (VAT) ID No. Date, signature All prices plus 19 % VAT. The invoice will be sent after registration. In case of cancellation of participation up to June 10, 2016, a cancellation fee of 50,00 will be charged. Starting June 11, 2016, the full price will be charged. Of course, naming a replacement participant at any time and at no additional cost is possible. IVAM reserves the right to take photos and videos during this event. IVAM will use it for documentation, advertising purposes and press campaigns. It is possible that participants/exhibitors/presenters will appear clearly recognizable on photos/videos used by IVAM. By accepting our terms and conditions, you agree to the described usage. If you do not agree, please inform IVAM before the event starts. Thank you.
GETTING THERE Temis Innovation Maison des Microtechniques 18 rue Alain Savary 25000 Besançon France Hotel address : Hôtel All Suites Besançon 17 Avenue des Montboucons, 25000 Besançon, France Phone: +33 (0)3 81 85 10 60 Access by road A36 / E5 : Paris (France) <-> Freiburg im Breisgau (Germany) Exit 4 «Besançon». At the roundabout, take the second exit (N57 Besançon) «TEMIS». Take the second exit LES MONTBOUCONS and at the first roundabout, take the fourth exit. At the second roundabout, take the second exit. See Hotel ALL SUITES and «Chez Elle» restaurant on your right. FEMTO-ST and TEMIS Maison des Microtechniques, are a little farther on the same side. Timing from : Stuttgart (Germany) : 3h40 Bâle (Switzerland) : 1h45 Genève (Switzerland) : 2h15 Lyon (France) : 2h15 Paris (France) : 3h50 Access by Train Get off at Besançon/Viotte (in the city center) or Besançon TGV (out of the city) and get bus or taxi to ALL SUITES Hotel, FEMTO-ST or Maison des Microtechniques on the TEMIS Innovation Zone (rue Montboucons, Besançon) If you need any hotel room please contact: support@polemicrotechniques.fr