ST70 Instruments Operatng Gude Welcome Congratulatons on havng chosen a Raymarne ST70 nstrument. Ths gves you easy access to the mportant nformaton you need to make your boatng experence both safe and enjoyable. ST70 provdes an adaptable, daylght-vewable color dsplay that you can customze to clearly show exactly what you want. No more, no less. CANCEL ENTER Ths Operatng Gude Ths Operatng Gude tells you how to use an ST70 nstrument, and descrbes how to swtch on the nstrument, set t up and dsplay the data you want, to best sut your style of operaton. Ths gude assumes that the nstrument has been prepared for use n accordance wth the Commssonng Procedures n the ST70 Instrument User Reference Manual. Note: ST70 products nclude nstruments and plot controllers. Ths gude gves user nstructons for the nstrument only. Informaton on usng the ST70 Plot Controller s gven n separate documentaton accompanyng the controller. MENU D9315-1 Contents Gettng started Swtch on/off & ntroducton... Card 1 Settng the screen brghtness... Card 2 Settng your preferences Choosng the screen colors... Card 3 Choosng data unts... Card 4 Organzng your pages Swtchng pages off & on... Card 5 Settng page rollover... Card 6 Changng the nformaton on a page... Card 7 Changng the layout of a page... Card 8 Resettng data... Card 9 Clocks Settng the correct local tme... Card 10 Usng the alarm clock... Card 11 Alarms Alarm events... Card 12 Settng alarms... Card 13 General nformaton Data lst... Card 14 Raymarne UK Ltd, Anchorage Park, Portsmouth, Hampshre PO3 5TD, Unted Kngdom Tel: +44 (0) 23 9269 3611, Fax:+44 (0) 23 9269 4642 Raymarne Inc,21 Manchester Street, Merrmack, New Hampshre 03054, USA Tel: +1 603.881.5200, Fax: +1 603.864.4756 Part Number: 81281-1 Date: June 2007 www.raymarne.com
Important Informaton WARNING: Product nstallaton & operaton Ths equpment must be nstalled and operated n accordance wth the Raymarne nstructons provded. Falure to do so could result n personal njury, damage to your boat and/or poor product performance. WARNING: Navgatonal safety Although we have desgned ths product to be accurate and relable, many factors can affect ts performance. Therefore, t should serve only as an ad to navgaton and should never replace common sense and navgatonal judgement. Always mantan a permanent watch so you can respond to stuatons as they develop. WARNING: Ensure Commssonng Procedures have been completed If the ST70 Commssonng procedures have not been completed, your nstrument could be dsplayng msleadng nformaton. Before usng ST70, ensure that the Commssonng Procedures (n the ST70 User Reference Manual) have been successfully carred out. EMC conformance All Raymarne equpment and accessores are desgned to the best ndustry standards for use n the recreatonal marne envronment. The desgn and manufacture of Raymarne equpment and accessores assures complance wth the approprate Electromagnetc Compatblty (EMC) regulatons, but correct nstallaton s requred to ensure that performance s not compromsed. Informaton The nformaton n ths gude s vald for ST70 Instruments and systems whch have been nstalled and commssoned n accordance wth the correct Raymarne procedures. Relevant documents are: ST70 Instrument User Reference Manual (contans commssonng, mantenance & troubleshootng procedures). ST70 Instrument Installaton Manual. SeaTalk NG Reference Manual. Handbook nformaton To the best of our knowledge, the nformaton on n ths operatng gude was correct when t went to press. However, Raymarne cannot accept lablty for any naccuraces or omssons. In addton, our polcy of contnuous product mprovement may change specfcatons wthout notce. Therefore, Raymarne cannot accept lablty for any dfferences between the product and the nformaton n ths gude. Waste Electrcal and Electronc (WEEE) Drectve The WEEE Drectve requres the recyclng of waste electrcal and electronc equpment. Whlst the WEEE Drectve does not apply to some of Raymarne's products, we support ts polcy and ask you to be aware of how to dspose of ths product. The crossed out wheele bn symbol, llustrated above, and found on our products sgnfes that ths product should not be dsposed of n general waste or landfll. Please contact your local dealer, natonal dstrbutor or Raymarne Techncal Servces for nformaton on product dsposal. Copyrght Raymarne 2007
CANCEL ENTER MENU Card1 ST70 nstrument - gettng started Swtch on/off & ntroducton Swtchng on your ST70 Instrument To swtch on your ST70 nstrument, hold down for 1 second. The nstrument powers up and shows the page that was dsplayed when the power was last swtched off. Note: If power to a system to whch ST70 nstruments s connected s swtched centrally (e.g.from a central crcut breaker), the on/off condton of each ndvdual nstrument when system power s appled reverts to what t was when the system power was last swtched off. See the ST70 User Reference Manual for system power protocol. Important Do not use the nstrument untl t has been commssoned as descrbed n the ST70 User Reference Manual. If you power up and a CHOOSE LANGUAGE page s dsplayed, the nstrument has not been commssoned snce t was nstalled, so you need to carry out the commssonng procedure before usng the nstrument. Depth 9.0 ft CANCEL ENTER MENU Speed 7.0 kts xx Lat Tme 47 o Lon 67 o 11:23 N 24H Language CANCEL ENTER MENU Englsh (UK) Headng o 63 D9271-1 D9302-1 Operatonal pages Data s dsplayed on operatonal pages, one page at a tme. Eght operatonal pages are avalable, and each page can be dvded nto up to sx separate data areas or frames. You can move from page to page ether manually usng or, or by means of an automatc rollover feature. Refer to Card 6 f you want to Set a rollover perod and actvate the automatc rollover. Swtch off the rollover to return to manual page selecton. Page 6 Page 7 Page 8 Page 5 Depth Speed Headng o 9.0 7.0 63 ft kts xx Page 1 Lat Tme 47 o Lon 47 11:23 N 24H D9262-1 Page 4 Page 3 Page 2 You can swtch OFF ndvdual operatonal pages. Refer to Card 5 for detals Customzng the operatonal pages You can change any operatonal page, to show only the nformaton you want. You can: Change the nformaton n any frame of any page. Refer to Card 7 for detals. Rebuld any page, so t has a dfferent frame layout wth dfferent data. Refer to Card 8 for detals. contnued...
ST70 nstrument - gettng started 1 Swtch on/off & ntroducton Card contnued Swtchng off an ST70 Instrument To swtch off your ST70 nstrument, hold down for 1 second, to dsplay the count-down popup, then contnue to hold down untl the dsplay counter reaches zero. At that pont: The dsplay goes blank. The nstrument power down s complete. Depth 9.0 Lat Power Down ft kts N Speed 7.0 3 47 o Lon 47 Headng o 63 Tme xx 11:23 Resolvng problems In the unlkely event that you experence problems usng your ST70 nstrument, refer to the troubleshootng procedures n the ST70 Instrument User Reference Manual. If you need further assstance, please vst the Customer Support area of our web ste at: www.raymarne.com As well as provdng a comprehensve Frequently Asked Questons secton and servcng nformaton, our web ste gves e-mal access to the Raymarne Techncal Support Department and detals of the locatons of Raymarne agents, worldwde. Telephone help lne If you do not have access to the world wde web, please call our help lne. In the USA, call: +1 603 881 5200 extenson 2444 In the UK, Europe the Mddle East or the Far East, call: +44 (0) 23 9271 4713 (voce) +44 (0) 23 9266 1228 (fax) Help us to help you When requestng servce, please quote the followng product nformaton: Equpment type. Model number. Seral number. Software verson. Hardware verson. You can fnd out ths nformaton by runnng the About Dsplay dagnostc functon (descrbed n the ST70 User Reference Manual). 24H D9337-1
Card2 ST70 nstrument - gettng started Settng the screen brghtness Use these nstructons to set the screen brghtness to the level you want. Quck Set Up To quckly change the screen brghtness: 1. Press and release to dsplay the brghtness adjust popup. 2. Use < or > to set the requred screen brghtness. 3. Press ENTER to accept the new brghtness settng and return to your operatonal page. Alternatve method 1. Go to Man Menu Wth any operatonal page dsplayed, press MENU to dsplay the Man Menu, then use < or > to scroll to the Dsplay Settngs opton. Press ENTER to show the Dsplay Settngs menu. Depth Speed 9.0 Lat ft N 7.0 Brghtness kts 47 o Lon 47 Press ENTER to accept Man Menu Dsplay Settngs Headng o 63 Tme 55% xx 11:23 24H D10030-1 2. Select opton At the Dsplay Settngs page, use < or > to scroll to the Brghtness opton. Press ENTER to dsplay the Brghtness setup box. Dsplay Settngs Brghtness D9328-1 Adjust the dsplay brghtness D9327-1 3. Set level Use < or > to set the screen brghtness, as requred. Press ENTER to save the selecton and return to the Dsplay Settngs menu. Brghtness 55 % Returnng to normal operaton To return to normal operaton from the Dsplay Settngs menu: 1. Press CANCEL to select the Man Menu. 2. Press CANCEL agan, to return to your operatonal page. < & > adjust brghtness. CANCEL exts wthout savng. Press ENTER to accept D9336-1
Card3 ST70 nstrument - settng your preferences Choosng the screen colors Use these nstructons to set the screen colors for optmum vewng. You can choose from three daytme and three nght-tme settngs Choosng colors 1. Go to Man Menu Wth any operatonal page dsplayed, press MENU, to dsplay the Man Menu, then use < or > to scroll to the Dsplay Settngs opton. Press ENTER to show the Dsplay Settngs menu. Man Menu Dsplay Settngs D9328-1 2. Go to Colors select box At the Dsplay Settngs menu, use < or > to scroll to the Colors opton. Press ENTER to dsplay the Colors select box. Dsplay Settngs Colours Select the dsplay colours. D9333-1 3. Select opton At the Colors select box, use < or > to select the color scheme that best suts your current vewng condtons. Press ENTER to save the selecton and return to the Dsplay Settngs menu. Colors Day1 Returnng to normal operaton To return to normal operaton from the Dsplay Settngs menu: 1. Press CANCEL to select the Man Menu. 2. Press CANCEL agan, to return to your operatonal page. < & > adjust colour. CANCEL exts wthout savng. Press ENTER to accept D9335-1
Card4 ST70 nstrument - settng your preferences Choosng data unts When an ST70 nstrument s connected to SeaTalk ng or SeaTalk 2, you can use the nstrument to select the unts n whch data s dsplayed throughout the system. A range of mperal, metrc and nautcal unts s avalable. Use the procedure on ths card to choose the unts you want. Choosng data unts 1. Select Man Menu Press MENU to dsplay the Man Menu then use < or > to scroll to Dsplay Settngs. Press ENTER to dsplay the Dsplay Settngs menu. Man Menu Dsplay Settngs 2. Intal actons At the Dsplay Settngs menu, use < or > to scroll to the Unts opton. Dsplay Settngs D9328-1 Unts Change the default unt settngs. 3. Unts summary Press ENTER to show a summary of the Unts currently appled. the second Unts summary page. If you do not want to change any unts, press CANCEL. Unts Speed KTS Dstance NM Depth FT Wnd Speed KTS Headng M Flow Rate G/H Temperature o C These are your current settngs. D9438-1 4. Unts select menu If you want to change any of the unts, press ENTER, to go to the Unts select menu. Unts Press ENTER to contnue D9439-1 5. Select the unts you want to change Use < or > to scroll to the requred data type (e.g. Wnd Speed Unts) Press ENTER to go to the Unts edt box. Wnd Speed Unts D9441-1 contnued...
ST70 nstrument - settng your preferences Choosng data unts Card 4contnued 6. Set the unts Use < or > to scroll to the requred unts. Press ENTER to save your settng and return to the Unts summary page. the second Unts summary page. Press ENTER to go to the Unts select menu. If you want to set other unts, repeat steps 5 and 6. Returnng to normal operaton When you have fnshed settng the unts and the Unts select menu s dsplayed: 1. If necessary, use < or > to scroll to the Contnue opton. 2. Press ENTER to return to your operatonal page. Wnd Speed Unts KTS Use < & > to adjust. CANCEL exts wthout savng. Unts Press ENTER to accept Contnue D9442-1 D9980-1
Card5 ST70 nstrument - organzng your pages Swtchng pages off & on If you need to quckly access only certan pages, you can swtch off the pages you do not need, and thus reduce the tme t takes to access the requred pages. Ths s a partcularly useful feature f you are usng the automatc rollover to select pages (see Card 6). Use the procedure on ths card to swtch pages off or back on agan, as requred. Swtchng pages on & off 1. Go to Man Menu Press MENU to dsplay the Man Menu then use < or > to scroll to Page Layout. Press ENTER to dsplay the Page Layout menu. Man Menu Page Layout 2. Select the page you want to swtch off At the Page Layout menu, use < or > to select the page you want to change. Press ENTER to dsplay the Setup optons menu for the selected page. 3. Select turn page on/off Use < or > to scroll to Turn page on/off. Press ENTER to dsplay the on/off select box.. Page Layout Select the page you wsh to confgure.. Page 1 Setup Page 1 On D9640-1 D9260-1 Turn page on/off 4. Select ether On or Off Use < or > to select ether On or Off, as requred. Press ENTER to save ths settng and return to the Setup optons menu. Page 1 On D9538-1 Use < & > to adjust. CANCEL exts wthout savng. Press ENTER to accept D9299-1 contnued...
ST70 nstrument - organzng your pages 5 Swtchng pages off & on Card contnued Returnng to normal operaton To return to your operatonal page: 1. Press CANCEL to select the Page Layout menu. 2. Press CANCEL to select the Man Menu.. 3. Press CANCEL to return to your operatonal page: If you swtched a page Off, the operatonal page s the next n sequence after the swtched off page. If you swtched a page On, then ths becomes the operatonal page.
Card6 ST70 nstrument - organzng your pages Settng page rollover You can set a rollover value so that operatonal pages are automatcally dsplayed n sequence, one after the other. Use the procedure on ths card to: Set a rollover perod and actvate the automatc rollover. Swtch off the rollover to return to manual page selecton. Settng rollover 1. Select Man Menu Press MENU to dsplay the Man Menu then use < or > to scroll to Dsplay Settngs. Press ENTER to dsplay the Dsplay Settngs menu. Man Menu Dsplay Settngs 2. Intal actons At the Dsplay settngs menu, use < or > to scroll to the Rollover opton. Press ENTER to show the Rollover setup box. Dsplay Settngs D9328-1 Rollover Automatc page rollover D10040-1 3. Set rollover value or swtch rollover off If you want the operatonal pages to cycle round automatcally, use < or > to set the rollover to the number of seconds you want each operatonal page to be dsplayed. Note: If you are usng the rollover feature, t s recommended you swtch off pages you do not requre (see Card 5). If you want to stop the rollover and manually select your operatonal pages, use < or > to set the rollover to OFF. Rollover 4 Secs < & > adjust rollover perod. CANCEL exts wthout savng. Press ENTER to accept D10039-1 Returnng to normal operaton Press ENTER to save your settng and return to the Dsplay Settngs menu then: 1. Press CANCEL to select the Man Menu. 2. Press CANCEL to return to your operatonal page.
ST70 nstrument - organzng your pages Choosng data unts Card contnued
Card7 ST70 nstrument - organzng your pages Changng the nformaton on a page You can change the nformaton dsplayed n any frame on any page. You can ether: Retan the basc page layout, but change the nformaton n ndvdual frames on a page, as descrbed on ths card, or Change the layout of a page by completely rebuldng t, as descrbed oncard 8. Changng nformaton 1. Go to Man Menu Press MENU to dsplay the Man Menu then use < or > to scroll to Page Layout. Press ENTER to dsplay the page select menu. Shortcuts: From an operatonal page you can drectly access the frame select box (see step 4 below) for that page, by holdng down ENTER for 1 second. Man Menu Page Layout 2. Select the page you want to change Use < or > to select the page you want to change. Press ENTER to dsplay the Setup optons menu for the selected page.. Page Layout D9640-1 3. Select the change tem opton Use < or > to scroll to Change an tem. Press ENTER to dsplay the frame select box. Page 1 On Select the page you wsh to confgure.. Page 1 Setup D9260-1 Change an tem 4. Select the frame you want to change Use < or > or or as approprate, to move the hghlght to the frame you want to change. Press ENTER to go to the data group select menu. Page 1 Xxx Xxx Xxx 0.0 0.0 0.0 xx xx xx Xxx Xxx Xxx 0.0 0.0 0.0 xx xx xx Depth CANCEL exts wthout savng. D9272-1 D9273-1 contnued...
ST70 nstrument - organzng your pages Changng the nformaton on a page 7 Card contnued 5. Select the requred data group Use < or > to select the data group that contans the data tem that you want (Depth shown here). If you don t know whch group you need, select ALL. Note: ST70 supports a wde range of data. Refer to Card 14 for a full data lst. Press ENTER to go to the data select menu. Page 1 Frame A Depth Select the data tems group. 6. Choose the data you want Use < or > to scroll to: Page 1 Frame A The data you want and The style n whch you want the data dsplayed. The styles avalable depend on the data type, but n many cases, Mnmum Depth data s avalable n the followng formats: Analog dal. Numerc value. Graph. the data and return to the frame select box. Select the new data tem for ths frame. 7. Set up other frames To set up other frames on ths page, repeat the procedure from step 4 to step 6. D9274-1 D9286-1 8. Complete page setup When you have completed the setup for the selected page, ensure the frame select box s dsplayed, then use <, >, and/or as approprate, to move the hghlght to the Save & Ext con. Press ENTER to return to your operatonal page, wth the changes appled. Press CANCEL to return to your operatonal page wthout applyng the changes. Page 1 Xxx Xxx Xxx 0.0 0.0 0.0 xx xx xx Xxx Xxx Xxx 0.0 0.0 0.0 xx xx xx Save and ext. CANCEL exts wthout savng. Save & ext D9338-1
Card8 ST70 nstrument - organzng your pages Changng the layout of a page Rebuldng pages If you want to make changes to the way a page s lad out, use the procedure on ths card to rebuld the page wth a dfferent layout and dfferent data. 1. Go to Man Menu Press MENU to dsplay the Man Menu then use < or > to scroll to Page layout. Press ENTER to dsplay the Select page menu. Shortcuts: From an operatonal page you can drectly access the frame select box (see step 5 below) for that page, by holdng down ENTER for 1 second. Man Menu Page Layout 2. Select the page you want to change Use < or > or to select the page you want to change. Press ENTER to dsplay the Setup optons menu for the selected page.. Page Layout D9640-1 3. Select Rebuld page Use < or > to scroll to Rebuld. Press ENTER to dsplay the Layout select menu. Page 1 On Select the page you wsh to confgure.. Page 1 Setup D9260-1 Rebuld 4. Select page layout Use < or > to hghlght the page layout you want. The followng layouts are avalable: Page Layout D9340-1 When you have selected the layout you want, press ENTER to go to the frame select box. Layout 1 Select the layout you wsh to use.. D9341-1 contnued...
ST70 nstrument - organzng your pages Changng the layout of a page Card 8contnued 5. Select the frame you want to change Use < or > or or as approprate, to move the hghlght to the frame you want to change. Press ENTER to go to the data group select menu. 6. Select the requred data group Use < or > to select the data group that contans the data you want (Depth shown here). If you don t know whch group you need, select ALL. Note: ST70 supports a wde range of data. Refer to Card 14 for a full data lst. Press ENTER to go to the data select menu. Page 1 Xxx Xxx Xxx 0.0 0.0 0.0 xx xx xx Xxx Xxx Xxx 0.0 0.0 0.0 xx xx xx Depth CANCEL exts wthout savng. Page 1 Frame A Depth D9273-1 7. Choose the data you want Use < or > to scroll to the data you want, n the style you want t dsplayed. The styles avalable depend on the data type, but n many cases, data s avalable n all the followng formats: Analog dal. Numerc value. Graph. the data and return to the frame select box. Select the data tems group. Page 1 Frame A Mnmum Depth Select the new data tem for ths frame. D9274-1 D9286-1 8. Set up other frames Repeat step 5 to step 7, to set up the remanng frames on the selected page. 9. Complete page setup When you have completed the setup for the selected page, ensure the frame select box s dsplayed, then use <, >, and/or as approprate, to move the hghlght to the Save & Ext con. Press ENTER to return to your operatonal page, wth the changes appled. Press CANCEL to return to the Setup optons menu, wthout applyng the changes. Page 1 Xxx Xxx Xxx 0.0 0.0 0.0 xx xx xx Xxx Xxx Xxx 0.0 0.0 0.0 xx xx xx Save and ext. CANCEL exts wthout savng. D9338-1 Save & ext
Card9 ST70 nstrument - organzng your pages Resettng data Resettable data The maxmum, mnmum and average runnng values of some data are accrued n the nstrument. You can reset these values usng the procedure on ths card. Most data reset to ther current values. An excepton s the trp log, whch resets to zero. Reset procedure 1. Requrement Make sure that the data you want to reset s dsplayed n at least one of the frames on your current operatonal page, then: 2. Enter Man Menu Press MENU to dsplay the Man Menu then f necessary, use < or > to scroll to the data you want to reset. 3. Reset data When you have selected the data, press ENTER. Ths resets the data and returns you to the operatonal page dsplayed before you started the reset procedure. Man Menu Reset maxmum depth Press ENTER to reset data D9339-1
Card10 ST70 nstrument - clocks Settng the correct local tme Note: Date and tme nformaton s avalable only f your ST70 nstrument s recevng GPS data. If your ST70 nstrument s recevng GPS data, you can use the procedure on ths card to set the correct local tme as your system tme. Set the tme 1. Go to Man Menu Press MENU to dsplay the Man Menu then use < or > to scroll to Dsplay Settngs. Press ENTER to dsplay the Dsplay settngs menu. Man Menu Dsplay Settngs 2. Select Tme & Date At the Dsplay Settngs menu, use < or > to scroll to the Tme and & Date opton. Dsplay Settngs D9328-1 Tme & Date 3. Tme & Date summary Press ENTER. A summary of the tme and date nformaton s then dsplayed. Change the default tme and date settngs. Tme & Date Tme 11:01:03 Date 14/06/07 Tme Offset -1 Hrs Tme Format 24-hour Date Format dd/mm/yy D9423-1 These are your current settngs. 4. Select tme offset Wth the summary page dsplayed, press ENTER to dsplay the Tme & Date menu. Use < or > to scroll to the Set tme offset opton. Note: If you want to change the tme or date format, use the procedure n the ST70 Instrument User Reference Manual. Press ENTER to contnue Tme & Date Set tme offset D9424-1 contnued... D9421-1
ST70 nstrument - clocks Settng the correct local tme 10 Card contnued 5. Set tme offset Press ENTER to dsplay the Set tme offset setup box. The tme offset s the dfference n tme between GMT (tme at Longtude 0 ) and local tme. Use < or > to set the approprate tme offset for your area. Press ENTER to accept the value and dsplay the Tme & Date summary page. Returnng to operatonal page Press ENTER to accept Wth the Tme & Date summary page dsplayed, press CANCEL to return to the Dsplay Settngs menu. Press CANCEL to return to the Man Menu. Press CANCEL to return to your operatonal page. Set tme offset -1.0 hrs Use < & > to adjust. CANCEL exts wthout savng. D9549-1
Card11 ST70 nstrument - clocks Usng the alarm clock Ths card tells you how to set and use the alarm clock. Settng alarm clock 1. Select Dsplay Settngs Press MENU to dsplay the Man Menu then use < or > to scroll to Dsplay Settngs. Press ENTER to dsplay the Dsplay Settngs menu. Man Menu Dsplay Settngs 2. Select Tmers At the Dsplay Settngs menu, use < or > to scroll to the Tmers opton, then press ENTER. to dsplay the Tmers menu. Dsplay Settngs D9328-1 Tmers Alarm clock D9445-1 Select Alarm Clock Alarm Clock s the only opton. Press ENTER to dsplay the Set alarm clock setup box. Tmers Alarm Clock 3. Set alarm Press to select the upper adjust box. Use < or > to set the alarm clock ether On or Off, as requred. Press to select the lower adjust box. Use < or > to set the alarm tme. Press ENTER to save the settng and dsplay the Tmers menu. Set alarm clock On 07:25 Hrs Press CANCEL to ext wthout savng. Press ENTER to accept D9627-1 D9626-1 contnued...
ST70 nstrument - clocks 11 Usng the alarm clock Card contnued Returnng to operatonal page To return to your operatonal page: 1. Press CANCEL to select the Dsplay Settngs menu. 2. Press CANCEL to select the Man Menu. 3. Press CANCEL to return to your operatonal page. Slencng alarm When the alarm sounds, press ENTER to slence the buzzer.
Card12 ST70 nstrument - alarms Alarm events Alarm ndcatons A range of alarm functons are avalable, to alert you to partcular events. When an alarm occurs, a popup box s dsplayed and an audble alarm ndcaton may sound. The popup dentfes the reason for the alarm. You can ether: Slence the alarm or Change the parameters for that partcular alarm. If an alarm occurs Depth 9.0 To slence the alarm, press CANCEL. To change the alarm parameters, press ENTER, to dsplay the alarm setup box. Use the procedures detaled, n steps 3 and 4 on,card 13, to set the parameters you want for the actve alarm. Alarm events The followng alarm functons are supported by ST70, although they may not all be applcable to your system. Alarm On-screen legend Alarm Group Apparent Wnd Angle hgh AWA Hgh Wnd Apparent Wnd Angle low AWA Low Wnd Apparent Wnd Speed hgh AWS Hgh Wnd Apparent Wnd Speed low AWS Low Wnd Boat speed hgh Boat Speed Hgh Speed Boat speed low Boat Speed Low Speed Deep water alarm Deep Depth Deep water anchor alarm Deep Anchor Depth Man Overboard MOB - Off course Off Course Depth Sea temperature hgh Sea Temp. Hgh Envronment Sea temperature low Sea Temp. Low Envronment Shallow water alarm Shallow Depth Shallow water anchor alarm Shallow Anchor Depth ST70 supply battery low alarm Battery Envronment True Wnd Angle hgh TWA Hgh Wnd True Wnd Angle low TWA Low Wnd True Wnd Speed hgh TWS Hgh Wnd True Wnd Speed low TWS Low Wnd Lat N Speed 7.0 Headng o 63 AWS maxmum kts xx Tme Press CANCEL to slence Press ENTER to edt 47 o Lon 47 11:23 24H D10032-1
Card13 ST70 nstrument - alarms Settng alarms For each alarm, you can: Dsable or enable the alarm. Set the level at whch the alarm operates. Settng up alarms 1. Enter alarm setup Press MENU to select the Man Menu then use < or > to scroll to Alarms. Press ENTER to dsplay the Alarms select menu. Man Menu Alarms 2. Select the alarm you want to set Use < or > to scroll to the alarm you want to select. Note: A complete lst of alarms s gven on Card 12. Press ENTER to dsplay the Alarm setup box. Alarms D9428-1 3. Set alarm status Press to select the upper (alarm status) adjust box. Use < or > to select the alarm status: Off - dsables the alarm. On - enables the alarm. 4. Set alarm value Press to select the lower (alarm value) adjust box. Use < or > to set the alarm value. Shallow Adjust the shallow depth alarm. Shallow On 4 feet Use < & > to adjust. CANCEL exts wthout savng. Press ENTER to accept D9551-1 D9429-1 Returnng to operatng page To return to your operatng page: 1. Press ENTER to save your settngs and return to the Alarms select menu. 2. Press CANCEL to return to the Man Menu. 3. Press CANCEL to return to your operatonal page.
Card14 Data lst ST70 nstrument - general nformaton Data lst Ths card lsts the data supported by ST70. Please note that these data are dependent on the confguraton of ndvdual systems, so wll be not all be avalable on all systems. Data Ar Temperature Alarm deep anchor Alarm Hgh Apparent Wnd Angle Alarm Hgh Apparent Wnd Speed Alarm Hgh sea temperature Alarm Hgh speed Alarm Hgh True Wnd Angle Alarm Hgh True Wnd Speed Alarm Low Apparent Wnd Angle Alarm Low Apparent Wnd Speed Alarm Low sea temperature Alarm Low speed Alarm Low True Wnd Angle Alarm Low True Wnd Speed Alarm maxmum depth Alarm mnmum depth (shallow alarm) Alarm off-course Alarm shallow anchor Alarm slence Alarm waypont arrval Apparent wnd angle Apparent wnd speed Apparent wnd speed maxmum Apparent wnd speed mnmum Average course error Average headng Average speed Barometrc pressure Battery Amps Battery temperature Battery voltage Beaufort Boost Pressure Bearng to waypont Group DEPTH SPEED SPEED DEPTH DEPTH HEADING DEPTH ALARM NAVIGATION HEADING HEADING SPEED ENGINE ENGINE ENGINE ENGINE NAVIGATION Data Calbraton lock Calbraton lock Cardnal Course made good Course over ground Course over ground + Speed over ground Coolant pressure Coolant Temperature Course to steer Cross track error Custom pages Depth Depth Offset Depth response Depth unts Devaton Dew pont Dstance made good Dstance made good + Course made good Dstance to empty Drft Dstance to waypont Economy Engne hours Engne RPM Engne Trm Poston Estmated tme of arrval Fuel Flow Fuel Level Fuel remanng GWD HDOP Headng Headng response Group DEPTH HEADING GPS GPS ENGINE ENGINE PILOT NAVIGATION RAYTECH DEPTH DEPTH DEPTH DEPTH HEADING HEADING HEADING FUEL NAVIGATION FUEL ENGINE ENGINE ENGINE NAVIGATION ENGINE ENGINE FUEL GPS HEADING HEADING contnued...
ST70 nstrument - general nformaton 14 Data lst Card contnued Data Group Data Group Humdty Seral number DIAGNOSTIC Illumnaton SYSTEM Set LAT GPS Software verson DIAGNOSTIC Local date TIME Speed over ground GPS Local tme TIME Speed SPEED Local tme + date TIME Speed adjust SPEED Locked headng HEADING Speed response SPEED Log LON Magnetc or true Max depth Max speed Maxmum ar temperature Maxmum sea temperature Mnmum depth Mnmum ar temperature Mnmum sea temperature MOB Ol Pressure Ol Temperature Rate of turn SATS SATS + HDOP Sea temperature SPEED GPS HEADING DEPTH SPEED DEPTH MOB ENGINE ENGINE BOAT GPS GPS Speed through water + Speed over ground Sunset / Sunrse Tack headng Temperature offset Temperature unts Tlt Trp Varaton VMG to waypont VMG to wndward True wnd angle True wnd speed Wnd angle response Wnd chll apparent Wnd chll true Wnd speed response GPS HEADING BOAT DISTANCE HEADING SPEED SPEED