JIEJIE MICROELECTRONICS CO., Ltd AK Series 6A Transient Voltage Suppressor Rev.2 DESCRIPTION: The AK6 series of high current bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer bi-directional port protection from 15 volts to 43 volts. They provide a clamping voltage lower than the avalanche voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create very high capacity protection solutions. FEATURES: Symbol Halogen-free. Bi-directional. RoHS compliant. Low slope resistance. Very low clamping voltage. Sharp breakdown voltage. Glass passivated junction. Foldback technology for superior clamping factor. High temperature soldering: 26 /1s at terminals. ABSOLUTE MAXIMUM RATINGS(TA=25, RH=45%-75%, unless otherwise noted) Parameter Symbol Value Unit Peak current rating per 8/2 μs IEC 61-4-5 IPP 6 KA Operating junction temperature range TJ -55 to +125 Operating storage temperature range TSTG -55 to +15 TEL:+86-513-83639777-1 / 5- http://www.jjwdz.com
ELECTRICAL CHARACTERISTICS(TA=25 ) Part Number VR VBR@IT IT IR@VR VC@IPP IPP 1 Bi-Polar V Min(V) Max(V) ma μa V A AK6-15C 15 16 19 1 1 28 6 AK6-2C 2 22 24 1 1 5 6 AK6-25C 25 28 3 1 1 6 6 AK6-3C 3 32 37 1 1 9 6 AK6-42C 42 47 51 1 1 15 6 AK6-58C 58 64 7 1 1 11 6 AK6-66C 66 72 8 1 1 12 6 AK6-76C 76 85 95 1 1 14 6 AK6-1C 1 11 122 1 1 165 6 AK6-133C 133 147 162 1 1 22 6 AK6-17C 17 18 22 1 1 26 6 AK6-19C 19 2 245 1 1 29 6 AK6-24C 24 25 285 1 1 34 6 AK6-275C 275 3 335 1 1 435 6 AK6-3C 3 33 366 1 1 47 6 AK6-38C 38 41 443 1 1 52 6 AK6-43C 43 44 49 1 1 625 6 1 Surge waveform:8/2μs VR: Stand-off voltage -- Maximum voltage that can be applied VBR: Breakdown voltage VC: Clamping voltage -- Peak voltage measured across the suppressor at a specified IPP IR: Reverse leakage current TEL:+86-513-83639777-2 / 5- http://www.jjwdz.com
RATINGS AND V I CHARACTERISTICS CURVES (TA=25, unless otherwise noted) FIG.1:V- I curve characteristics (Bi-directional) VC VBR VR IPP IT IR I IR IT IPP VR VBR VC V Percent of VBR change 12 1 8 6 4 2-2 -4-6 FIG.2: Typical VBR Vs Junction Temperature -8-75 -5-25 25 5 75 1 125 Junction Tempurature (TJ) 15 FIG.3: Pulse waveform IPPM(%IRSM) tr=8μs tr = rise time to peak value td = decay time to half value FIG.4: Pulse derating curve PPP derating in percentage(%) 1 8 1 5 Peak value Half value 6 4 2 td t(μs) 2 4 6 8 TA( ) 25 5 75 1 125 15 175 SOLDERING PARAMETERS FIG.5: Lead-free profile Temperature( ) 3 25 2 15 1 5 Maximum Wave 26C Tab1: Flow/Wave soldering Peak temperature 265 Dipping time 1 seconds Soldering 1 times Time(minutes).5 1. 1.5 2. 2.5 3. 3.5 4. TEL:+86-513-83639777-3 / 5- http://www.jjwdz.com
PACKAGE MECHANICAL DATA A L2 G L1 F C D B E Size A Size B Symbol Inches Millimeter Symbol Inches Millimeter A.951±.4 24.15±1. A.63±.2 16.±.5 B.94±.24 2.4±.6 B.94±.24 2.4±.6 C.236±.4 6.±1. C.236±.4 6.±1. D.56max 14.max D.56max 14.max E.5±.2 1.27±.5 E.5±.2 1.27±.5 F.56max 14.max F.56max 14.max 15C to 25C.16max 4.max 15C to 25C.16max 4.max 3C to 42C.2max 5.max 3C to 42C.2max 5.max 58C to 76C.24max 6.max 58C to 76C.24max 6.max G 1C to 133C.32max 8.max G 1C to 133C.32max 8.max 17C to 19C.39max 1.max 17C to 19C None None 24C to 3C.55max 14.max 24C to 3C None None 38C to 43C.7max 17.max 38C to 43C None None L1/L2 L1=L2 tolerance±.47inch(±1.2 mm) L1/L2 L1=L2 tolerance±.47inch(±1.2 mm) Part Number Case Type Quantity Packing Option AK6-XXC AKS 84pcs Box TEL:+86-513-83639777-4 / 5- http://www.jjwdz.com
MARKING& ORDERING INFORMATION AK6-XXC AK 6 - XX C (1) (2) (3) (4) (1) AK series (2) IPP=6KA (3) Reverse stand-off voltage (4) Bi-directional Apply to P/N listed below: AK6-15C; AK6-2C; AK6-25C; AK6-3C; AK6-42C; AK6-58C; AK6-66C; AK6-76C; AK6-1C; AK6-133C; Type 1 - Side View AK6-XXC AK 6 - XX C (1) (2) (3) (4) (1) AK series (2) IPP=6KA (3) Reverse stand-off voltage (4) Bi-directional Apply to P/N listed below: AK6-17C AK6-19C AK6-24C AK6-275C AK6-3C AK6-38C AK6-43C Type 2 - Top View Information furnished in this document is believed to be accurate and reliable. However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. Information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, Jiangsu JieJie complies with the agreement. Products and information provided in this document have no infringement of patents. Jiangsu JieJie assumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. This document is the second version which is made in 6-May-217. This document supersedes and replaces all information previously supplied. is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd. Copyright 217 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved. TEL:+86-513-83639777-5 / 5- http://www.jjwdz.com