Version: DSD0221EN01 Quick Start Guide
Table of Contents Quick Installation Guide... 1 What s in the Box... 1 Quick Start Guide... 2 Notes for Installation... 2 Operation Steps for ios Device... 3 Live video... 3 Wi-Fi setting... 8 Alarm setting... 10 Other settings... 11 Operation Steps for Android Device... 12 Live video... 12 Wi-Fi setting... 17 Alarm setting... 19 Other settings... 19 Operation Steps for Windows PC... 20 Operation Steps for Apple PC... 25 Reset Camera Password... 28 Frequently Asked Questions... 29
Quick Installation Guide NOTE: Certain functions, line drawing and snapshots mentioned in this manual may vary according to camera's model. For example, pan and tilt function are for Pan/Tilt enabled cameras only. What s in the Box Hardware installation Software installation Live video Wireless connection setting Alarm setting 1. IP Camera x1 2. DC Power Adapter x1 3. Network Cable x1 4. Mounting Bracket x1 5. Quick Installation Guide x1 6. CD-ROM with Setup Software x1 1
Quick Start Guide 1. Check whether all the accessories are complete. 2. Connect the power cable and link the IP camera to the router with network cable. 3. Debug the various machines and network Settings. 4. Fix the mounting bracket to the location where IP Camera will be placed. 5. Switch on the power. Notes for Installation 1. Please read all safety tips carefully before installation. 2. Please make sure to install the camera in the cool and dry place. 3. Please make sure to put the camera in a stable place to avoid damage. 4. Please make sure the camera is powered off before you clean it. 5. Rub the camera with a wet cloth. No chemicals or aerosol is allowed during cleaning. 6. Please send the camera to qualified service personnel if the following situations happen: 1. The power cable or plug is broken. 2. Liquid is infiltrated into the camera. 3. The camera falls and gets damaged. 4. The camera cannot work properly. 2
Operation Steps for ios Device Live video 1. Download and installl D3D Live from App Store 2. Tap on Sign up if you do not already have an account. Fill in the required information to register for a new user account. After signing up, please log on to your account. 3
3. Tap on to add your new camera to your account; find the camera by matching UID code in the list to the UID code displayed at the bottom of the camera. If your camera resides in the same LAN (Local Area Network) ), its UID code will show up in the list. 4
4. You can choose to add you camera manually: Click button and select your cameraa model and enter camera s UID code (displayed at the bottom of the camera) and password. You can scan camera s UID from Camera's QR code by tapping QR Code Icon to initiate the scan. 5. Enter the camera's name and password. By default the password is admin. 5
6. After adding the camera by default password, the App will remind you to change the camera s password for security concern. 7. Select the camera you've just added to start viewing live video. 6
8. Tap on to display additional functions: Snapshot Record Alarm events Albums Talk Audio Pan/tilt control: 8 directions pan/tilt control. Talk: Allows user to talk to the camera from App. Alarm Events: This camera does not support this function. Snapshot: Take a snapshot picture from current camera feed; Albums: View the snapshots taken. Audio: Allows user to listen to the camera s audio feed. 7
Wi-Fi setting 1. Click to start configuring your camera for wireless operation. 2. The camera will start scanning for Wi-Fi connections. Select your Wi-Fi connection or network ID (SSID). Enter the password for your Wi-Fi connection. 8
3. After clicking Join, you can now disconnect the network cable from your camera and start using your camera as a wireless device. *Notice: Please wait for 30 sec to 1 min for camera to switch to Wi-Fi mode; 9
Alarm setting 1. To enable motion detection of the camera, please choose the detection sensitivity level for movement detection. *Notice: We recommend this function to be deactivated in a busy environment to avoid massive notifications. 10
Other settings Flip Video Mirror the displayedd image horizontally or vertically when the camera is mounted. General About Device: Containing information of devicee and its firmware version. Change camera name: Change camera s display name; Change camera password: Changing camera s user password 11
Operation Steps for Android Devicee Live video 1. Download D3D Live Live directly in CD. from Google s Play Store, or install D3D 2. Tap on Sign up if you do not already have an account. Fill in the required information to register for a new user account. After signing up, please log on to your account. 12
3. Tap on to add your new camera to your account; find the camera by matching UID code in the list to the UID code displayed at the bottom of the camera. If your new camera resides in the same LAN (Local Area Network), its UID code will show up in the list. 13
4. You can choose to add your camera manually: Click button and select your camera model and enter camera s UID code (displayed at the bottom of the camera) and password. You can scan camera s UID from Camera's QR code by tapping QR Code Icon to initiate the scan. 5. Enter the camera's name and password. By default the password is admin. 14
6. After adding the camera by default password, the App will remind you to change the camera s password for security concern. 7. After change the password. Select the camera you've just added to start viewing live video. 15
Instructions for the icons and buttons on live video page: Pan/tilt control Tap on the button on the video to pan or tilt the camera Allows User to listen to the camera s audio feed and talk to the camera from the app. This camera does not support this function. Take a snapshot picture from current camera feed. View the snapshots taken. 16
Wi-Fi setting 1. Click to start configuring your camera for wireless operation. 2. The camera will start scanning for Wi-Fi connections. Select your Wi-Fi connection or network ID (SSID). Enter the password for your Wi-Fi connection. 17
3. When the Wi-Fi is successfully configured, you can now disconnect the network cable from your camera and start using your camera as a wireless device. *Notice: Please wait for 30 sec to 1 min for camera to switch to Wi-Fi mode; 18
Alarm setting 1. To enable motion detection of the camera, please choose the detection sensitivity level for movement detection. *Notice: We recommend this function to be deactivated in a busy environment to avoid massive notifications. Other settings Basic setting Video quality: Adjust the video quality. Video flip: Mirror the displayed image horizontally or vertically when the camera is mounted. Modify security code: Changing camera s user password 19
Operation Steps for Windows PC 1. Install D3D Search Tool from CD. 2. Run D3D Search Tool on desktop, click search to search cameras in LAN. 3. Select the camera listed in LAN by its UID code, highlight the camera in the list and click Open. 20
4. The default web browser will be launched to display the login window. Log on to the cameraa by using camera s username and password. By default username is admin and password is admin. 5. After login the camera, it will prompt you to installl the web browser plug-in. Click Install download and install the plug-in. 6. Click Install to allow the Internet Explorer to begin the plug in installation; 21
7. After installation of the live video. the plug-in, you can refresh the page and watch 22
Instructions for the icons and buttons on live video page: Power frequency Resolution Click this button to go to Cameraa Setup Adjust power frequency to stabilize camera video image Adjust video resolution 8 arrows to Pan/Tilt the camera and the center button is used for taking snapshot. Patrol horizontal or vertical. Go center when click Center button Preset positions are IP camera's memorized Pan/Tilt positions. Once a preset position is set, you can simply press the preset button that corresponds to the preset you want to see and the camera will point to that position automatically. Set preset position; (only available for the camera with Pan/Tilt) 23
Go to a specific preset position (only available for the camera with Pan/Tilt functionality) Turn on/off /IR-LED Adjust the brightness level; Invert the video horizontally and vertically Zoom in Zoom out Turn on audio reception of the camera (only available for camera with 2-way audio) Turn on speaker of the camera (only available for the camera with 2-way audio) Record video to PC, you can configure the recording path in the setup menu Full screen *Notice: For more functions and settings in web browser, please find details in advanced user manual in CD. 24
Operation Steps for Apple PC 1. Run D3D Search Tool in CD, click search to search cameras in LAN. 2. Select the camera listed in LAN by its UID code, double click the highlight the camera in the list. 3. The default web browser will be launched to display the login window. Log on to the cameraa by using camera s username and password. By default username is admin and password is admin. 4. After login the camera, you could get the live video. 25
Instructions for the icons and buttons on live video page: Power frequency Resolution Click this button to go to Cameraa Setup Adjust power frequency to stabilize camera video image Adjust video resolution 8 arrows to Pan/Tilt the camera and the center button is used for taking snapshot. Patrol horizontal or vertical. Go center when click Center button Preset positions are IP camera's memorized Pan/Tilt positions. Once a preset position is set, you can simply press the preset button that corresponds to the preset you want to see and the camera will point to that position automatically. Set preset position; (only available for the camera with Pan/Tilt) 26
Go to a specific preset position (only available for the camera with Pan/Tilt functionality) Turn on/off /IR-LED Adjust the brightness level; Invert the video horizontally and vertically *Notice: For more functions and settings in web browser, please find details in advanced user manual in CD. 27
Reset Camera Password Please press the reset button under or on the camera for about 15 seconds until the camera reboots. Please make sure the power supply is connected to the camera when you are doing it. Reset *Notice: Once you reset the camera, the camera will lose the entire configuration. 28
Frequently Asked Questions How do I reset my camera? 1. Press and hold the Reset button at the bottom for over 3 seconds until the camera confirms this action by rotating itself. 2. Please wait until the rotation is finished, unplug the power and plug in again. The camera is fully reset and restored to factory setting. 3. You will need to setup your camera again. Why is the image black and white? When the environment is getting dark the camera will activate night vision mode automatically. When night vision is activated, the video feed will be in black and white. Is there a limit on connection or viewing time? We provide unlimited access to your camera for free. Why is my camera offline? Please check the power button of the camera and the router to ensure the connection is valid then proceed to reboot. I forgot my password for the camera, how can I find it? Please go to reset password section. What is the default password for the camera? The default password of the camera is admin 29
Customer Service For any support issue, please contact: Email: support@d3dsecurity.com OR visit our website for Installation video: www.d3dsecurity.com