www.homesystems-legrandgroup.com
Index Description of the 4 Use of the with Web pages from Personal computer 5 Base functions 7 Scenarios 7 Diagnostics 7 Functions reserved for the administrator user 8 Configuration - Device 8 Configuration Language 9 Troubleshooting 9 The does not respond to requests via Ethernet (browser, ping, etc.) 9 3
Description of the This device can be used to manage up to 300 simple and advanced scenarios. Thanks to the scenario programmer, the system can perform certain actions, not only following a command from the user, but also when external events occur, such as the opening of a door. The execution of an advanced scenario combined with a set time and date, may initiate, for example, the simulation of a presence inside the home by automatically activating the rolling shutters or the lights at certain preset times, when no one is in fact at home. Scenarios are programmed inside the device thanks to the software. The installation of the scenario programmer only requires connection to the power supply, and to the MY HOME Automation BUS. Types of scenarios that can be saved in : EVENT DAY ETHERNET Made in Italy Dawn SCS Garden lights OFF Shutters UP NIGHT ETHERNET Made in Italy Dusk SCS Garden lights ON Shutters DOWN ETHERNET No wind - 10.00 o clock SUMMER Made in Italy SCS Sun shades open Shutters UP Watering ON WAKE UP ETHERNET Made in Italy Dawn - 7.15 a.m. Monday to Friday SCS Garden lights OFF Shutters UP Sound system ON WINTER ETHERNET Made in Italy Dusk - 5.15 p.m. SCS 4 Garden lights ON Shutters DOWN Temperature control ON 22
Use of the with Web pages from Personal computer The connection between PC and is only available for one access at the time. It is therefore not possible to connect several users to the, and therefore to the system, at the same time. Access to the system control pushbuttons is clearly protected by a personal login name and password system. Once the correct login name and password have been entered, it will be possible to display the list of all the functions that can be activated, defined during the configuration of the using the software. Warning: if the system is left idle for a period of time, set during the programming stage, the scenario programmer will sign itself off and the system will return to the login page. It will then be necessary to re-enter the login name and the password. Identification page Control home page Two types of user can access the Web pages: administrator user user user In addition to being able to access the same pages as a normal user, the system administrator can also access the CONFIGURATION section, and define certain parameters, such as login and password for accessing the pages as normal user, set the date and time, select the language, etc. Note: the login name and password details of the administrator are set using the software and can be modified through the web. 5
Example of a Web page: 1 2 3 9 8 7 6 5 4 1. address 2. identification name 3. Pushbutton to return to the home page. 4. Icon of the function selected 5. Activation pushbuttons 6. Activation pushbuttons 7. Information and operation area 8. Exit pushbutton 9. Functions available selection area 6
Base functions Scenarios This function can be used to display, activate/deactivate and enable/disable the scenarios configured in the scenario programmer. Note: The confirmation message: Command sent is displayed in the page for each command sent successfully. Diagnostics On clicking on DIAGNOSTIC the page containing the device parameters and the diagnostic message (e.g.: No anomaly found) is displayed. 7
Functions reserved for the administrator user If accessing the Web page as administrator, the function bar will display the CONFIGURATION box, which includes two pages: DEVICE LANGUAGE Configuration - Device In this page the system administrator can configure the login and password for the normal user (Web access), and the Ethernet configuration parameters for access to. To confirm the entered data press the pushbutton. Clicking on TIME/DATE gives access to the page to configure the date, time and time zone data. To confirm the entered data press the pushbutton. 8
Configuration Language In this page the administrator user can configure the Web page display language. The default language is Italian; several other languages are also available. When the language required is selected and confirmed the Web pages will be displayed in the new language. If the system is performing other operations a wait message will appear. Troubleshooting General checks on switching ON after connection When the SCS BUS is connected, the system LED turns on, and then off again after a few instants. It then comes back on again to indicate that the scenario programmer is in operation. If this does not happen contact the technical after-sales service. The does not respond to requests via Ethernet (browser, ping, etc.) Make sure that the SCS system is correctly powered and working. Check that the PC Ethernet cable (used to communicate with the ) and the cable are correctly connected to their RJ45 ports. Check that the PC used to communicate with the and the are correctly configured (in particular, check that the PC network interface is active and that its IP address and netmask are compatible with those of the device). Also check that the IP addresses set in the PC and the are not already being used by other devices in the LAN. 9
Legrand SNC 128, av. du Maréchal-de-Lattre-de-Tassigny 87045 Limoges Cedex - France www.legrand.com BTicino SpA Viale Borri, 231 21100 Varese www.bticino.it Legrand SNC si riserva il diritto di variare in qualsiasi momento i contenuti illustrati nel presente stampato e di comunicare, in qualsiasi forma e modalità, i cambiamenti apportati.