CALIBRATION REPORT FOR COORDINATE MEASURING MACHINE
|
|
- Steven Wells
- 5 years ago
- Views:
Transcription
1 CALIBRATION REPORT FOR COORDINATE MEASURING MACHINE Customer Information: Machine Information: Chad Richardson Precision Measuring Name: Inc Machine Serial No: Address: 1492 Maple Grove Church Road Machine Type: Global_Classic City: Mount Airy Machine Size: 9208 State: NC Probehead Type: TESASTAR-M Test Information: Certificate Date: 11/01/2012 Probe Type: PROBE_TP20 Engineer: Darryl Haynes Probe Serial No: R35050 B/L Number: Work Instruction No: HWI Engineers Temp Gage Cert: Test Method: American National Standard ASME B89,4,1b-2001 It is hereby certified that the above-described machine has been tested onsite per the American National Standard ASME B89,4,1b-2001 test method per ISO and ANSI Z540 and conforms to the original manufacturer's specifications that are traceable to NIST. Records of traceability are on file and available for review. Findings: Contracted Service, Minor adjustments to squareness were performed Environmental Conditions: Max Standard Ambient Temperature ( C):22 Meets Factory Specification Min Standard Ambient Temperature ( C):18 Meets Factory Specification Spatial Thermal Gradient ( C/meter):1 Max Recorded Temperature ( C):21.9 Min Recorded Temperature ( C):19.6 Meets Factory Specification Signed by: Darryl Haynes Date:11/01/2012 Page 1of 10
2 B89 Repeatability, (as derived from B b, Section 5.3).* Calibration Results: Uncertainty ±0.2 (µm) Axis Factory Specification Measured Range X 2.2 (µm) 0.45 (µm) Meets Factory Specification Y 2.2 (µm) 0.75 (µm) Meets Factory Specification Z 2.2 (µm) 0.65 (µm) Meets Factory Specification Calibration Data: Position X Deviation (µm) Y Deviation (µm) Z Deviation (µm) Diameter B89 Repeat Page 2of 10
3 B89 Volumetric Performance, Measurement Uncertainty (as derived from B b, Section 5.5.2).* Calibration Results:Meets Factory Specification Factory Specification : 11.0 (µm) Ballbar Gage Control No : GC_14060 Results : 4.33 (µm) Ballbar Gage Cert No : GS_14060 No of Bar Positions : 25 Ballbar Gage Due Date : 02/08/2013 Uncertainty : ±0.6 (µm/m) Nominal Bar Length :749.8 Calibration Data: Bar Position Measured Length Range (µm) Dev'n to Mean (µm) Page 3of 10
4 B89 Volumetric Performance, Measurement Uncertainty (as derived from B b, Section 5.5.2).* Calibration Data (Continued): Bar Position Measured Length Range Dev'n to Mean B89 Volumetric Page 4of 10
5 Calibration Results: Linear Displacement Accuracy = Maximum spread of mean differences over 3 runs Uncertainty Method:None Axis Factory Specification Uncertainty (µm) Measured Range (µm) Gage X L/ Serial No:GC_13619 Cert No:13619 Meets Factory Specification Due Date:10/14/2013 Calibration Data: X X X X X X X X X X X X X X X X X Page 5of 10
6 Calibration Data (Continued): B89 Lda X Page 6of 10
7 Calibration Results: Linear Displacement Accuracy = Maximum spread of mean differences over 3 runs Uncertainty Method:None Axis Factory Specification Uncertainty (µm) Measured Range (µm) Gage Y L/ Serial No:GC_13619 Cert No:13619 Meets Factory Specification Due Date:10/14/2013 Calibration Data: Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Page 7of 10
8 Calibration Data (Continued): Y Y Y Y Y Y Y Y Y Y Y Y Y B89 Lda Y Page 8of 10
9 Calibration Results: Linear Displacement Accuracy = Maximum spread of mean differences over 3 runs Uncertainty Method:None Axis Factory Specification Uncertainty (µm) Measured Range (µm) Gage Z L/ Serial No:GC_13619 Cert No:13619 Meets Factory Specification Due Date:10/14/2013 Calibration Data: Z Z Z Z Z Z Z Z Z Z Z Z Z Z Page 9of 10
10 Calibration Data (Continued): B89 Lda Z Page 10of 10
Laser diagonal testing
Laser diagonal testing H-5650-2056-01-B 20/08/2018 1 Introduction This presentation explains how Renishaw laser calibration systems can be used to check machine positioning performance along machine diagonals,
More informationPixel Size Calibration of Video Probe Measuring Machines James G. Salsbury Center for Precision Metrology University of North Carolina at Charlotte
Pixel Size Calibration of Video Probe Measuring Machines James G. Salsbury Center for Precision Metrology University of North Carolina at Charlotte Coordinate measuring machines (CMMs) equipped with video
More informationCyberGage 360 3D SCANNERS. One-Button Automation for 3D Scan Inspection.
CyberGage 360 One-Button Automation for 3D Scan Inspection. Powered by MRS Technology 3D SCANNERS Unprecedented speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection.
More informationCyberGage360 3D SCANNERS. One-Button Automation for 3D Scan Inspection.
CyberGage360 One-Button Automation for 3D Scan Inspection. 3D SCANNERS Unprecedented speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection. Powered by MRS Technology
More information1. Introduction 2. Specifications 3. Symbol Definition and Button Location 4. Operation Instructions 5. Temperature Measurement 6.
CONTENTS TITLE PAGE 1. Introduction.. 1 2. Specifications... 1 3. Symbol Definition and Button Location... 2 4. Operation Instructions.... 3 4.1 Power-Up...3 4.2 Connection of the Temperature Probe...
More informationRosemount 1595 Conditioning Orifice Plate
Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only
More informationTraceable 3D X-Ray Measurements ZEISS METROTOM
20 Traceable 3D X-Ray Measurements With a computer tomograph, you can successfully perform measuring and inspection jobs yourself with only one X-ray scan. The standard acceptance test, the precision engineering
More informationCompliance with API Standard 670 the PRO Product Standard for Proximity Probes
Connection Technology Center, Inc. 7939 Rae Boulevard Victor, New York 14564 Toll Free: (800) 999-5290 Phone: (585) 924-5900 Fax: (585) 924-4680 Compliance with API Standard 670 the PRO Product Standard
More informationAccuracy for CMMs and Machine Tools
Systematic machine errors Rapid Calibration and Compensation of CMM and Machine ools: Recent Developments of the Lasertracer echnology Motivation Geometry errors he LaserRACER RAC-CAL for Error Mapping
More informationQC20-W wireless ballbar system description and specifications
QC20-W wireless ballbar system QC20-W wireless ballbar system description and specifications Hardware Software QC20-W ballbar and ballbar kit QC20-W ballbar The QC20-W ballbar contains a precision linear
More informationPCMM System Specifications Leica Absolute Tracker and Leica T-Products
www.leica-geosystems.com/metrology PCMM System Specifications Leica Absolute Tracker and Leica T-Products Leica Absolute Tracker accuracy The measurement uncertainty of a coordinate U xyz is defined as
More informationPCMM System Specifications Leica Absolute Tracker and Leica T-Products
www.leica-geosystems.com/metrology PCMM System Specifications Leica Absolute Tracker and Leica T-Products Leica Absolute Tracker accuracy Feature Benefit The measurement uncertainty of a coordinate U xyz
More informationPIONEER The Affordable Quality Coordinate Measuring Machine
PIONEER The Affordable Quality Coordinate Measuring Machine Coordinate Measuring Machines www.sheffieldmeasurement.com PIONEER... PIONEER is the perfect fit for manufacturers purchasing their first coordinate
More informationInc. FLO-CAL Liquid Calibration System FLO-CAL SOFTWARE FLEXIBLE DESIGN TO MEET YOUR LIQUID FLOW CALIBRATION REQUIREMENTS
FLEXIBLE DESIGN TO MEET YOUR LIQUID FLOW CALIBRATION REQUIREMENTS FLO-CAL A portable Liquid Flow Standard FLO-CAL INSTRUMENT Data acquisition and interface tool with flow meter frequency and analog signals.
More informationNon-Contact Thickness Measurement
Non-Contact Thickness Measurement It's Our Business to be Exact! Reliable accuracy and exceptional repeatability for the most demanding thickness testing applications. Applications CONTACT AND INTRAOCULAR
More informationFamily of Water Cut Analyzers
Phase Dynamics Technology for Precision Measurements Phase Dynamics, Inc. 1251 Columbia Drive Richardson, TX 75081 USA E-Mail sales@phasedynamics.com Tel: 972-680-1550 Fax: 972-680-3262 Family of Water
More informationProposed new tests for evaluating CMM performance
Introduction Proposed new tests for evaluating CMM performance Pereira, P. H. & Beutel, D. E. Technical Services Division, Caterpillar Inc., Peoria, IL The current series of international standards for
More informationPrecimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION
Precimar Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed for absolute and relative measurement
More informationAxes 150 mm/s 150 mm/s. Y axis Z axis Vector 260 mm/s 260 mm/s. P in µm P in µm
ZEISS PRO / Specifications Version: May 2016 System description ZEISS PRO Models Operating mode Sensor mounts Software Horizontal-arm measuring machine on X-axis guide for flush-floor installation Horizontal-arm
More information! Ranges from -45º to 650ºC. ! Rapid heating, cooling and settling. ! Switch test, ramp, step and preset functions
DBC SERIES DBC 150/650 Series Dry Block Temperature Calibrators 99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com! s from -45º to 650ºC! Rapid heating, cooling and settling!
More informationStandard Trackstar material. FDA/USDA approved material. Improved wear resistance and reduced thermal expansion Available in all colors except white
2 The Advantage Fight friction and reduce costs with long-wearing Trackstar UHMW Belt and Chain Guides. Available from stock, Fenner Drives offers the widest range of standard profiles for use in guiding
More informationCalibration Procedure. DeFelsko Corporation. CAL-P# and STDP# Polystyrene Blocks
Management Procedure 2560 Revision: F Date Issued: April 16, 1999 Date Revised: August 20, 2015 Calibration Procedure DeFelsko Corporation CAL-P# and STDP# Polystyrene Blocks Table of Contents 1 Introduction
More informationPrecimar. PLM and CiM Universal Length Measuring Machines
24 Precimar. Precision Length Metrology Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed
More informationA NATIONAL MEASUREMENT GOOD PRACTICE GUIDE A NATIONAL MEASUREMENT GOOD PRACTICE GUIDE. No. 42. No. 42. CMM Verification.
A NATIONAL MEASUREMENT GOOD PRACTICE GUIDE A NATIONAL MEASUREMENT GOOD PRACTICE GUIDE No. 42 No. 42 CMM Verification CMM Verification The DTI drives our ambition of prosperity for all by working to create
More informationHigh Precision Lens Mounting
High Precision Lens Mounting APOMA Tucson Tech Workshop, 10-11 November, 2016 Presentation by Frédéric Lamontagne Institut national d optique (INO) Québec City, Canada 2016 Outline 1. Review of common
More informationDatasheet - ZR Z
Print - Create PDF - Create EXCEL file 21.04.2011-16:57:42h Datasheet - ZR 236-11Z Position switch / 236 thermoplastic enclosure - DIN EN 50047 with Actuator / 236 Roller plunger R thermoplastic enclosure
More informationRosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
More informationRosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
More informationContents 1 Measurement and Machine Tools An Introduction
Contents 1 Measurement and Machine Tools An Introduction... 1 1.1 Why the Need for Accurate and Precise Machine Tools a Brief History.... 1 1.2 The Early Historical Development of a Linear Measurements....
More informationInvestigating the volumetric performance of multi-axis measurement arms
Investigating the volumetric performance of multi-axis measurement arms J.Singh, M.Hughes & J N Petzing Wolfson School of Mechanical & Manufacturing Engineering Loughborough Universty, UK Abstract Multi-axis
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationLABMICROMETER. Pratt & Whitney UNIVERSAL LENGTH MEASURING SYSTEM. Measurement Systems, Inc.
Pratt & Whitney Measurement Systems, Inc. The Standard of Accuracy Laser-Based LABMICROMETER is designed to provide the ultimate in user-friendly operation while delivering calibration-quality accuracy
More informationEllab Temperature Indicator
Ellab Temperature Indicator FDA compliant alternative to mercury-inglass thermometers for retort monitoring - and much more ETI Ellab Temperature Indicator The ETI is availble in three different configurations
More informationGood Practice guide to measure roundness on roller machines and to estimate their uncertainty
Good Practice guide to measure roundness on roller machines and to estimate their uncertainty Björn Hemming, VTT Technical Research Centre of Finland Ltd, Finland Thomas Widmaier, Aalto University School
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection
More informationTEST METHODS FOR COORDINATED MOTION OF FIVE-AXIS MACHINING CENTERS
TEST METHODS FOR COORDINATED MOTION OF FIVE-AXIS MACHINING CENTERS Shawn P. Moylan, Ronnie R. Fesperman, and M. Alkan Donmez Manufacturing Engineering Laboratories National Institute of Standards and Technology
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0386 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. CALIPER $ (Vernier / Dial / Digital) L. C. 10µm Φ Up to 600 mm >600 mm to 1000 mm 14.0 µm 19.0 µm Using Gauge Block Set, Caliper Checker, Length Bar & External
More informationPORTABLE SURFACE ROUGHNESS GAGE. POCKET SURF
- PORTABLE SURFACE ROUGHNESS GAGE. POCKET SURF The Pocket Surf portable roughness gage is one of the easiest to use and most popular surface roughess gages ever made. The Pocket Surf performs traceable
More informationDatasheet - AZ 15 ZVRK
24.12.2015-09:51:40h Datasheet - AZ 15 ZVRK Safety switch with separate actuator / AZ 15 Preferred typ Thermoplastic enclosure Double-insulated Long life 52 mm x 75 mm x 30 mm Multiple coding Large wiring
More informationDatasheet - ZS Z
Datasheet - ZS 236-11Z Position switch / 236 thermoplastic enclosure - DIN EN 50047 with Actuator / 236 Plunger S thermoplastic enclosure Good resistance to oil and petroleum spirit Wide range of alternative
More informationGeneral Specifications
General Specifications Model MLX Loop Powered Process Indicator GS 60A02S01-01E-A The Model MLX Loop-Powered Process Indicator receives DC current signals from electronic transmitters and indicates process
More informationQuickly diagnose the performance of your machine tools
QC10 ballbar system Quickly diagnose the performance of your machine tools Reduces down-time Reduces both machine down-time and maintenance costs Compliance Reports comply with ISO, ASME and JIS standards
More informationSpecification for temperature sensor calibration setup
1. Item description Automated Temperature calibration setup made of: A. High accuracy temperature bath with internal and external reference probe, multiple sensors insert kits, carry case and other accessories.
More informationaccurate measurement of compressed air consumption and leakage detection Calibration certificates and continous calibration, OEKD calibration service
Series Flowmeter for compressed air and gases in Industrial Applications The flowmeter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 8 I. DIMENSION 1. PLAIN PLUG / WIDTH/ DEPTH / Upto 100 mm 2.0 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ Above 100 to 300 mm 3.0 µm Comparator with Stand
More informationSurface-mounting Thermostats AM Series with 1 or 2 single-pole snap-action switches IP40 protection
Page 1/6 Surface-mounting Thermostats AM Series with 1 or 2 single-pole snap-action switches IP40 protection Brief description Surface-mounting thermostats control and monitor thermal processes. Thermostats
More informationCovers NewView TM 8000/9000, Nexview TM & Nexview NX2. ZYGO Optical Profiler Accessory Guide OMP 0594J
Covers NewView TM 8000/9000, Nexview TM & Nexview NX2 ZYGO Optical Profiler Accessory Guide OMP 0594J Interferometric Objectives (1) Standard objectives provide a wide range of magnifications to accommodate
More informationQuadProII Resistivity System
QuadProII Resistivity System Measures V/I, Sheet Resistance, Resistivity or Thickness Reports Average, Standard Deviation, Minimum, Maximum and 1Sigma for the data set Temperature Coefficient of Resistance
More informationPOCKET SURF IV I ABSOLUTE MOBILITY FOR SURFACE ROUGHNESS MEASUREMENTS
+ POCKET SURF IV I ABSOLUTE MOBILITY FOR SURFACE ROUGHNESS MEASUREMENTS 2 Pocket Surf IV. Portable Surface Roughness Gage Important Definitions and Surface Parameters Real surface separates a body from
More informationMultisensor Coordinate Measuring Machines ZEISS O-INSPECT
Multisensor Coordinate Measuring Machines ZEISS O-INSPECT Having all the necessary options for reliable measurements. ZEISS O-INSPECT // RELIABILITY MADE BY ZEISS 2 The O-INSPECT multisensor measuring
More informationTHE ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS FOR AUTOMATED INSPECTION
METROLOGY SOLUTIONS THE ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS FOR AUTOMATED INSPECTION Accelerate your industrial inspection processes by bringing quality control as close to the part as possible. For
More informationDatasheet - ZR Z
12.02.2016-22:08:18h Datasheet - ZR 235-11Z Position switch / 235 Metal enclosure - DIN EN 50047 with Actuator / 235 Roller plunger r Preferred typ Metal enclosure Wide range of alternative actuators Good
More informationMESTRA +TOUCH INTRODUCTION
MESTRA + TOUCH 23 TRIMOS HEIGHT GAUGES MESTRA +TOUCH INTRODUCTION The "Mestra" height measuring instruments are classified among the most accurate ones worldwide. This new instrument line is the result
More informationDIGITAL SOUND LEVEL METER. Instruction Manual
DIGITAL SOUND LEVEL METER 840029 Instruction Manual CONTENTS I. Introduction... 3 II. Panel Description... 3 III. Operating Instructions A. Measuring Procedure... 4 B. Settings for General Applications...
More informationHMT360 Series Intrinsically Safe Humidity and Temperature Transmitters
www.vaisala.com HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters Customers may specify the transmitter configuration when ordering the instrument, however changes in configuration
More informationST-ATAC. Dynamic 3D Probe Head with Adaptive Touch Advanced Control
Industrial Measuring Technology from Carl Zeiss ST-ATAC. Dynamic 3D Probe Head with Adaptive Touch Advanced Control SIMPLY MEASURE Spectrum of Applications Fast, dynamic data acquisition by means of single-point
More informationA FEW CASE STUDIES IN UNCERTAINTY USING THE NIST M48 CMM
A FEW CASE STUIES IN UNCERTAINTY USING THE NIST M48 CMM John Stoup Precision Engineering ivision National Institute of Standards and Technology Gaithersburg, Maryland 20899 INTROUCTION The Moore M48 coordinate
More informationSurface Texture Measurement Fundamentals
Surface Texture Measurement Fundamentals Dave MacKenzie Slide 1 Presentation Scope Examples of Why We Measure Surface Texture Stylus Based Instruments Stylus Tracing Methods Filters and Cutoff Basic Parameters
More informationEE771 Series. Flowmeter for compressed air and gases in Industrial Applications. EE771 Compact. EE771 remote probe
Series Flowmeter for compressed air and gases in Industrial Applications The flowmeter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow
More informationDST600. Digi-Stem Digital RTD Reference Thermometer for Retorts & Temperature Critical Applications. Exclusive Continuous Self-Checking Technology
Actual Size Exclusive Continuous Self-Checking Technology Trustworthy Alternative to Mercury-in-Glass Designed in compliance with the FDA Final Rule Change for 21 CFR Part 113 Digi-Stem Digital RTD Reference
More informationMore Precision. optoncdt // Laser displacement sensors (triangulation)
More Precision optoncdt // Laser displacement sensors (triangulation) 1 High Speed PSD Sensors optoncdt 1610 / 1630 INTER FACE Nine models with measuring ranges from mm to 100 mm Sensor head and separate
More informationHMT360 Series Intrinsically Safe Humidity and Temperature Transmitters
www.vaisala.com HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters Customers may specify the transmitter configuration when ordering the instrument, however changes in configuration
More informationVECTRA-TOUCH
179 introduction The «Vectra-Touch» height measuring instruments are of universal use in any production field. They are the result of 30 years of experience in development and manufacturing. This experience
More informationEE75 Series. High-Precision Air / Gas Velocity Transmitter for Industrial Applications. Model A. Model B. Model C. Typical Applications.
Series High-Precision Air / Gas Velocity Transmitter for Industrial Applications The series air velocity transmitters were developed to obtain accurate measuring results over a wide range of velocities
More informationLaboratory Accreditation Building Confidence on Testing Quality
Laboratory Accreditation Building Confidence on Testing Quality Dr. George Anastasopoulos, Director (Conformity Assessment) & Prasanth S Ramakrishnan, MS, LEED-AP (Principal Staff & Program Manager) ASME
More informationTHE ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS FOR AUTOMATED INSPECTION
METROLOGY SOLUTIONS THE ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS FOR AUTOMATED INSPECTION Accelerate your industrial inspection processes by bringing quality control as close to the part as possible. For
More informationDr. Heinrich Schwenke, CEO Etalon AG
The latest trends and future possibilities of volumetric error compensation for machine tools Errors of machine tools Kinematic chain Conventional measurements Etalons Multilateration approach Compensation
More informationENVIRONMENTAL TEST REPORT N REV. N/C TEST STANDARDS: MIL-STD-202G
ENVIRONMENTAL TEST REPORT 1510-107N REV. N/C TEST STANDARDS: MIL-STD-202G For ANALOG DEVICES INC 3 TECHNOLOGY WAY NORWOOD, MA 02053 On ELECTRONICS MODULE MODEL NUMBER: NONE ; PART NUMBER: NONE ; SERIAL
More informationSquareness C0Y A0Z B0Z
ETALON offers system solutions for highly accurate and complete geometric analysis, monitoring and accuracy improvement of machine tools, measuring machines, robots and structures. Innovative technologies
More informationAPI Gaging Practice. PMC Lone Star Technical Brief Doc. 100 Rev. B
API Gaging Practice Doc. 100 Rev. B David R. Maisch Chief Engineer June 4, 2008 The American Petroleum Institute (API), headquartered in Washington, DC, USA is a world leader in the development of standards
More informationIntroduction. Prerequisites. Ballbar - QC20-W - Analysis LAST UPDATED: 12/01/2018
Ballbar - QC20-W - Analysis LAST UPDATED: 12/01/2018 Ballbar - QC20-W - Analysis Introduction This procedure tells you how to do a Renishaw QC20-W ballbar analysis. The QC20-W BallBar uses a Bluetooth
More informationGeneral Specifications
General Specifications Model MLX Loop Powered Process Indicator GS 60A02S01-01E-A The Model MLX Loop-Powered Process Indicator receives DC current signals from electronic transmitters and indicates process
More informationEfficiency (typ.) Load VDC VDC ma ma(typ.) ma(typ.) μf %
FEATURES Smallest Encapsulated 10W Industrial Standard DIP16 Package Ultrawide 4:1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500VDC Operating Ambient Temp. Range 40 to 88 Low No
More informationCAL250. Precision Acoustic Calibrator Manual
CAL250 Precision Acoustic Calibrator Manual APPENDIX Larson Davis CAL250 Reference Manual I250.01 Rev I Copyright Copyright 2016 PCB Piezotronics, Inc. This manual is copyrighted, with all rights reserved.
More informationMultisensor Coordinate Measuring Machines ZEISS O-INSPECT
Multisensor Coordinate Measuring Machines ZEISS O-INSPECT Having all the necessary options for reliable measurements. ZEISS O-INSPECT // RELIABILITY MADE BY ZEISS 2 The O-INSPECT multisensor measuring
More informationMicro-Flat Datums Pvt. Ltd., Plot No , Zone D-3, GIDC, Vitthal Udyognagar, Anand, Gujarat
Last Amended on 03.12.2015 Page 1 of 9 I. DIMENSION 1. CALIPERS $ L.C.: 0.01 mm Φ L.C.: 0.02 mm Φ 0 to 600 mm 0 to 1000 mm 0 to 2000 mm 9.37 µm 9.25 µm 14.64 µm Using Slip Gauge Set, Caliper Checker, Master
More informationDICKSON FH320/325 & FT300/325 DICKSON. Temperature/Humidity Recorder. Specifications. Applications & Product. Product. Contents: Getting Started
FH320/325 & FT300/325 Temperature/Humidity Recorder Contents: and Instrument Anatomy Accessories Warranty / Accessories, & Calibration FH325 Remote Probe Temperature & Humidity FT325 Remote Probe 2 Channel
More informationRHM160. Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications. Features. Applications. Benefits
RHM160 Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications Features Standard Pressure ratings up to 50bar (725 psi) Temperature ratings from -196 to 120 C (-320 to 248 F) Mass flow
More informationCalibration and setup of a tool probe
Calibration and setup of a tool probe Fundamentals Tool-setting is the process of determining geometric information length, radius and / or diameter of a cutting tool using a tool-setting device. Some
More informationOrdering details. Approval. Classification. Global Properties :27:33h. Solenoid interlock / AZM 161I / AZM 161I B6R
13.06.2016 05:27:33h Datasheet AZM 161SK 12/12RI 024 B6R Solenoid interlock / AZM 161I / AZM 161I B6R right hand model Compact design Interlock with protection against incorrect locking. For very smal
More informationMonte Carlo method to machine tool uncertainty evaluation
Available online at www.sciencedirect.com ScienceDirect Procedia Manufacturing 13 (2017) 585 592 www.elsevier.com/locate/procedia Manufacturing Engineering Society International Conference 2017, MESIC
More informationLimitations of laser diagonal measurements
Precision Engineering 27 (2003) 401 406 Limitations of laser diagonal measurements Mark A.V. Chapman Laser and Calibration Products Division, Renishaw Plc., Old Town, Wotton-under-Edge, Glos GL12 7DW,
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Quality Engineering Service of the Chippewa
More informationIndustrial Measuring Technology from Carl Zeiss. `lkqro^ `lkqro^ do=oap do=^hqfs
Industrial Measuring Technology from Carl Zeiss `lkqro^ `lkqro^ do=oap do=^hqfs lîéêîáéï fåíêççìåáåö=íüé=åéñí=öéåéê~íáçå ëå~ååáåö=éä~íñçêãk `lkqro^=do=oap=~åç=`lkqro^=do=^hqfsw=qüé=`jj=íü~í=äêçìöüí ^ÅíáîÉ=pÅ~ååáåÖ=íç=ëã~ää=~åÇ=ãáÇëáòÉ=ã~åìÑ~ÅíìêÉêë=Ü~ë=ÄÉÉå=êÉÇÉëáÖåÉÇ
More informationThe FaroArm. The world s best-selling measurement arm
The FaroArm The world s best-selling measurement arm The FaroArm One step closer to perfection Versatile Three models: Quantum, Platinum and Fusion. FARO offers diverse mounting options and accessories
More informationIndustrial Temperature Calibration
Industrial Temperature Calibration Hart Scientific, The World Leader in Temperature Calibration Hart Scientific, a Fluke company, is the world s leading manufacturer of temperature calibration and measurement
More informationGLOBAL SOLUTIONS IN ENGINEERING. Power Performance Testing
GLOBAL SOLUTIONS IN ENGINEERING Power Performance Testing Buildings Municipal Infrastructure Transportation Industrial Energy Environment 2 Why Power Perfomance Testing? Identification of turbine performance
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationHygroPalm 0. Portable Humidity Temperature Indicator. Instruction Manual
HygroPalm 0 Portable Humidity Temperature Indicator Instruction Manual v 3 20040211 - 2 Contents Overview... 3 General Description... 3 Power Source... 3 Optional Docking Station (PD1-ACA)... 3 Unit System...
More informationPRISMO Vario. Specifications and Performance Features. Industrial Measuring Technology from Carl Zeiss. Wide sensor variety
Industrial Measuring Technology from Carl PRISMO Vario Specifications and Performance Features Wide sensor variety For all requirements Highly versatile More measuring options PRISMO Vario Technology The
More information1 DESCRIPTION 2 APPLICATIONS. ACCUBAND STRIP WIDTH GAGE Model C765-F
ACCUBAND STRIP WIDTH GAGE Model C765-F Description & Specifications DS.ACB.896.4 1 DESCRIPTION The ACCUBAND Strip Width Gage model C765-F is an economical non-contact optoelectronic instrument which measures
More informationEMP1 OPERATING & INSTALLATION INSTRUCTIONS
468 Liberty Drive Wittenberg, WI 54499 U.S.A. Tel: 715-253-2801 Ver.11-01-2008 Fax: 715-253-2811 Web: www.solar.imcinstruments.com REV. 5-15-10 EMP1 OPERATING & INSTALLATION INSTRUCTIONS EMP1-0200 PILOT
More informationDBC 150/650 Series. Druck Dry Block Temperature Calibrators. GE Sensing. Features
Features Ranges from -45 C to 650 C Measures reference probe, RTDs, T/Cs, ma, mv and ohms Rapid heating, cooling and settling Ramp, step and preset functions Reads set temperature and device output simultaneously
More informationCALIBRATION OF LINEAR POTENTIOMETERS
1 PROCEDURE OVERVIEW The calibration of a linear potentiometer is outlined in this procedure. A scaling factor is determined based on the use of a calibration jig and gauge blocks meeting the requirements
More informationDST600. Digi-Stem Digital RTD Reference Thermometer for Retorts & Temperature Critical Applications
Actual Size Exclusive Patent- Pending Wahl Continuous Self- Checking Technology Trustworthy Alternative to Mercury-in-Glass Designed in compliance with the FDA Final Rule Change for 21 CFR Part 113 Digi-Stem
More informationGuideways X axis Precision-manufactured, anodized extruded profile made of light metal. On stabilized, welded steel supports
ZEISS MMZ E Specifications Version: November 2017 System description Type according to ISO 10360-1:2000 Gantry CMM Guideways X axis Precision-manufactured, anodized extruded profile made of light metal
More informationCalibration and setup of part probe
Calibration and setup of part probe Fundamentals To measure workpiece dimensions, an electronic touchtrigger probe is required that provides a signal change (edge) when deflected with the required repeat
More informationXM-60 measures all six degrees of freedom
XM-60 multi-axis calibrator 1 Process foundation Component quality is dependent on machine performance. Without understanding a machine s error profile it is impossible to have confidence that your components
More informationElcometer 456 Integral Coating Thickness Gauge
http://www.btmco.ir Elcometer 456 Integral Coating Thickness Gauge The new Elcometer 456 makes measuring coating thickness faster, reliable and accurate. Over 60 years of product design experience has
More informationLAUREL ELECTRONICS, INC.
LAUREL ELECTRONICS, INC. Laureate RTD Temperature Panel Meter / Controller Features Factory calibrated for 100Ω platinum, 10Ω copper & 120Ω nickel RTDs 2, 3 or 4-wire connection with lead resistance compensation
More information