BACnet Protocol Implementation Conformance Statement

Transcription

1 BAnet Protocol Implementation onformance Statement Date: July Vendor Name: Schneider Electric Product Name: Low Voltage A Motor Drive Product Model Number: Altivar 212 Application Software Version: v184 and upper Firmware evision: v5.2 BAnet Protocol evision: 6 Product Description: The Altivar 212 is a high performance adjustable frequency drive specifically designed for HVA building application. This product supports BAnet (embedded) connecting to the MS/TP LAN. BAnet Standardized Device Profile (Annex L): X BAnet Operator Workstation (B-OWS) BAnet Building ontroller (B-B) BAnet Advanced Application ontroller (B-AA) BAnet Application Specific ontroller (B-AS) BAnet Smart Sensor (B-SS) BAnet Smart Actuator (B-SA) List all BAnet Interoperability Building Blocks Supported (Annex K): DS-P-B, DS-PM-B, DS-WP-B, DS-WPM-B, DM-DDB-B, DM-DOB-B, DM-D-B, DM-D-B Segmentation apability: Segmented requests supported Window Size Segmented responses supported Window Size Standard Object Types Supported: Object instantiation is static, i.e. objects cannot be created or deleted. efer to tables at end of document for object details. OPYING WITHOUT WITTEN AUTHOISATION POHIBITED.

2 Data Link Layer Options: BAnet IP, (Annex J) BAnet IP, (Annex J), Foreign Device ISO , Ethernet (lause 7) ANSI/ATA 878.1, 2.5 Mb. ANET (lause 8) ANSI/ATA 878.1, S-485 ANET (lause 8), baud rate(s) X MS/TP master (lause 9), baud rate(s): Auto, 9600, 19200, 38400, MS/TP slave (lause 9), baud rate(s): Point-To-Point, EIA 232 (lause 10), baud rate(s): Point-To-Point, modem, (lause 10), baud rate(s): LonTalk, (lause 11), medium: Other: Device Address Binding: Is static device binding supported? (This is currently necessary for two-way communication with MS/TP slaves and certain other devices.) Networking Options: Yes X No outer, lause 6 - List all routing configurations, e.g., ANET-Ethernet, Ethernet-MS/TP, etc. Annex H, BAnet Tunneling outer over IP BAnet/IP Broadcast Management Device (BBMD) Does the BBMD support registrations by Foreign Devices? Yes No haracter Sets Supported: Indicating support for multiple character sets does not imply that they can all be supported simultaneously. X ANSI X3.4 IBM /Microsoft DBS ISO ISO (US-2) ISO (US-4) JIS 6226 If this product is a communication gateway, describe the types of non-banet equipment/networks(s) that the gateway supports:

3 Object/Property Support Matrix The following table summarizes the Object Types/Properties Supported: Binary input object instance summary ID Object name Description Active/Inactive text Access 1 Binary input #0 O 1 AT Indicates status of relay ON/OFF Binary input #1 O 2 AT Indicates status of relay ON/OFF Y Binary input #6 DI 1 AT Value of F ON/OFF Binary input #7 DI 2 AT Value of ON/OFF Binary input #8 DI 3 AT Value of ES ON/OFF Binary output object instance summary ID Object name Description Active/Inactive text Access Binary Output #0 O1 MD FL relay out accessible ON/OFF if not assigned Binary Output #1 O2 MD Y relay out accessible if not assigned ON/OFF Analog input object instance summary Analog Input #0 ANALOG INPUT 1 VIA analogue % Analog Input #1 ANALOG INPUT 2 VIB analogue % Analog Input #2 ANALOG OUTPUT 1 AT Analogue output % Analog output object instance summary Analog Output #0 ANALOG OUTPUT 1 Analogue output % Binary value object instance summary ID Object name Description Active/Inactive Access text Binary Value #0 UN/STOP AT Indicates the drive status UNS/EADY Binary Value #1 FWD/EV AT Indicates the motor rotation s direction EV/FWD Binary Value #2 FAULT AT Indicates the drive s fault status FAULTED/NONE Binary Value #4 HAND/AUTO AT Indicates if the drive is locally controller or not. HAND/AUTO Binary Value #6 MAIN EQ umulative operation hours alarm YES/NO Binary Value #7 DIVE EADY The VSD is ready and waits a start EADY/NOT command. EADY Binary Value #8 AT SETPOINT The VSD has reached the target speed. EAHED/NO Binary Value #10 UN/STOP MD ommands a drive start. STAT/STOP Binary Value #11 FWD/EV MD ommands a motor direction s change. EV/FWD Binary Value #14 FAULT ESET esets faults ESET/NO Binary Value #15 MBOX EAD ommand to read parameter EAD/ESET W Binary Value #16 MBOX WITE ommand to write parameter WITE/ESET W

4 Binary Value #18 SP1PESET Preset speed operation frequencies 1 SP1/NONE Binary Value #19 SP2PESET Preset speed operation frequencies 2 SP2/NONE Binary Value #20 SP3PESET Preset speed operation frequencies 3 SP3NONE Binary Value #21 SPTSEL Frequency priority selection ENABLED/OFF Binary Value #22 MDSEL ommon priority selection ENABLED/OFF Binary Value #23 DAMPE FBK Damper feedback ON/OFF W

5 Analog value object instance summary Analog value #0 OUTPUT SPEED Output speed rpm Analog value #1 OUTPUT FEQ Output frequency Hz Analog value #2 D BUS VOLT D bus voltage V Analog value #3 OUTPUT VOLT Motor voltage V Analog value #4 UENT Motor current A Analog value #5 TOQUE Motor torque % Analog value #6 POWE Motor power % Analog value #7 DIVE TEMP Drive thermal state % Analog value #8 KWH () Energy counter (erasable) KWh Analog value #10 P PID FBK PID PID regulator feedback value % Analog value #14 UN TIME Operating time H Analog value #16 INPUT EF1 Velocity / frequency setpoint from BAnet % Analog value #18 LAST FLT Error code - Analog value #19 PEV FLT 1 Previous fault (occurred before LASTFLT) - Analog value #20 PEV FLT 2 Previous fault (occurred before PEVFLT1) - Analog value #23 AEL1 TIME Acceleration time S W Analog value #24 DEEL1 TIME Deceleration time S W Analog value #25 MBOX PAAM Parameter number - W Analog value #26 MBOX DATA Parameter value - W NOTE : For Present Value Access Types, = ead-only, W = Writeable, = ommandable Additional functions Besides the services of datasharing the communication port provides the following functions. Full parameters access. By the use of indirect access, it is possible to read or write any of the internal parameters of the VSD. This functionality is assured by these four objects: MBOX DATA, MBOX PAAM, MBOX EAD, MBOX WITE. eading: Write the logic address of the parameter to the present value property of the object MBOX PAAM. Set present value property of the object MBOX EAD to read. The current value of the parameter can be read in the present value property of MBOX DATA. Writing a parameter: Write the logic address of the parameter to the present value property of the object MBOX PAAM. Write the new value in the present value property of the object MBOX DATA. Set present value property of the object MBOX WITE to write. Note: MBOX EAD and MBOX WITE automatically return back to inactive once command sent. Always return 0 when read.