Gereedskaplyste 2019
|
|
- Emma Pitts
- 5 years ago
- Views:
Transcription
1 Gereedskaplyste 2019
2 Inhoudsopgawe Diesel- /Trekkerwerktuigkunde... 2 Elektries & Meulmaker... 4 Gereedskapmaker... 6 Pas en Draai... 8 Sweis
3 Diesel- /Trekkerwerktuigkunde ITEM NO TOOLBOX: BESKRYWING AANBEVOLE HANDELSMERK AANTAL 1 Five Layer Toolbo Steel 550 mm Gedore 1 (Cantilever Type) 2 Pad Lock 40 mm Viro or Circle 1 FILES: 3 2nd Cut Flat File 250 mm with handle Nicholson 1 4 2nd Cut Hand File 150 mm with handle Nicholson 1 5 Bastard Flat File 300 mm with handle Nicholson 1 6 2nd Cut Square File mm with Nicholson 1 handle 7 2nd Cut Round File Own Choice - 1 Good Quality PUNCHES: 8 Center Punch Eclipse 1 9 Pin Punch Set Eclipse 1 HAMMERS: 10 Ball-Pein Hammer 300 gm R&W / Mitco 1 11 Ball-Pein Hammer 700 gm R&W / Mitco 1 12 Softface Hammer or Mallet Nylon Heads R&W / Mitco 1 MEASURING EQUIPMENT: 13 Vernier (0-150mm) Accuracy mm Mititoyo / Starret 1 14 Engineering Square - Steel 100 mm M&W / Rabone 1 15 Steel Ruler 300 mm Starrett / Asahi 1 16 Tape Measure 5 meter Stanley 1 17 Feeler Gauge Range: 0.03 up to 1 Eclipse 1 mm PLIERS: 18 Pliers Engineer - Snapping - Flat 200 mm Gedore 1 (Isolated) 19 Circlip Pliers - Inner (Straight) 150 mm Gedore 1 20 Circlip Pliers - Outer (Straight) 150 mm Gedore 1 21 Circlip Pliers - Inner (Bended) 150 mm Gedore 1 22 Circlip Pliers - Outer (Bended) 150 mm Gedore 1 23 Longnose Pliers (Isolated) 150 mm Gedore 1 24 Waterpump Pliers (Adjustable) 300 mm Gedore 1 25 Vice Grips - Vee Jaw 250 mm Gedore 1 26 Side Cutter (Isolated) 200 mm Gedore 1 SPANNERS & TOOLS: 27 Combination Spanners (Ring / Flat open) 28 Combination Spanners off (Ring / Ring) 29 Socket Wrenches set 12 mm. (⅟2") - DRIVE 6 mm to 32 mm Gedore 1 Set 6 mm to 32 mm Gedore 1 Set 6 mm to 32 mm Gedore 1 Set 2
4 30 Socket Wrenches set 9mm (⅜ )- 6 mm to 19 mm Gedore 1 Set Drive 31 Allen Keys (Metric) 1 mm to 10 mm Eight 1 Set 32 Chisel - flat mm Mitco 1 33 Tommy Bar 45 mm 19 mm Mitco 2 34 Hacksaw (Square frame 300 mm JBS / Kennedy 1 professional plus) 35 Screw Driver Set (7 piece set) Vera 1 Set 36 Impact screwdriver set Vera 1 37 Shifting Spanner 300 mm Bacho 1 38 Safety Glasses Own Choice - 1 Good Quality 39 Pipe wrench (Bobbejaan) Capacity: 35 mm Gedore 1 ELECTRICAL TOOLS & EQUIPMENT: 40 Test Lamp 6 to 24 Volt Major Tech 1 41 Multi Meter (Digital) AC/DC 1 Note: Brand Names are just an indication of quality M&W = Moore & Wright Other Names: King Tony / Micro-Tech 3
5 Elektries & Meulmaker ITEM NO TOOL DESCRIPTION RECOMMENDED BRAND NAME ELEKTRIES MEULMAKER TOOLBOX: Five Layer Toolbo 1 Steel (Cantilever Type) 550 mm Gedore 2 Pad Lock 40 mm Viro or Circle FILES: 3 2nd Cut Flat File 250 mm with handle Nicholson / Pferd 4 2nd Cut Hand 150 mm with handle Nicholson / Pferd 5 Bastard Flat File 300 mm with handle Nicholson / Pferd 6 2nd Cut Square file 7 File Brush mm with handle 4 Nicholson / Pferd Own Choice - Good Quality PUNCHES: Prick Punch & Center 8 Punch Eclipse 9 Centre Punch 10 Pin Punches Set HAMMERS: 11 Ball-Pein Hammer 300 gm R&W / Mitco 12 Softface Hammer of Mallet Nylon Heads MEASURING EQUIPMENT: Vernier - MPVF ( mm) Accuracy mm Mititoyo / Starret Engineering Square - 14 Steel 100 mm M&W / Rabone 15 Steel Ruler 300 mm Starrett / Asahi 16 Tape Measure 5 m (meter) Stanley 17 Divider (Steel) 150 mm M&W / Rabone 18 Spirit Level (Magnetic) 200 mm TA 19 Feeler Gauge 0.03 up to 1mm PLIERS: Pliers Engineer - Combination - Electric 20 (Isolated) 200 mm Gedore Circlip Pliers - Inner 21 (Straight) 150 mm Circlip Pliers - Outers 22 (Straight) 150 mm Roundnose Pliers 23 (Isolated) 150 mm Gedore Waterpump Pliers 24 (Adjustable) 300 mm Gedore 25 Vice Grips - Vee Jaws 250 mm
6 26 Side Cutter (Isolated) 200 mm Gedore SPANNERS & TOOLS: Combination Spanners 6 mm to 24 mm 27 (Ring - Flat) (1Set) Gedore Socket Wrenches set 28 (12 Point) Optional (1Set) 1 mm to 10 mm 29 Alan Keys (1 Set) Metric 30 Alan Keys (1 Set) Imperial 31 Chisel - Flat mm Hacksaw (Square frame 32 professional plus) 300 mm JBS / Kennedy Screw Driver Set (7 33 piece set) Insulated Vera 34 Scriber (Double ended) Kennedy 35 Shifting Spanner 300 mm Bacho Own Choice - 36 Safety Glassess Good Quality Pipe wrench 37 (Bobbejaan) Capacity 35 mm 38 Nut Driver 10 mm King Tony 39 Tinsnip universal TA 40 Tube Spanner ELECTRICAL TOOLS & EQUIPMENT: Digital Multimeter Auto 41 Range (Major Tech MT24) Major Tech 42 Line Tester DustPole Crimping Tool (for noninsulated 43 cable links mm) Up to 16 mm Conti Own Choice - 44 Wire-Stripper Good Quality 45 Pype Bending Spring 20 mm Own Choice - Good Quality Note: Brand Names are just an indication of quality M&W = Moore & Wright Other Names: King Tony / Micro-Tech * Meulmaker Ambag: Meulmaker items (Meganies & Elektries) word as volg benodig: Meganiese deel: Eerste 10 weke - Item nommer: 1-39 Elektriese deel: Na die 10 weke - Item nommer: Elektriese Ambag: Slegs Elektriese Items 5
7 Gereedskapmaker ITEM BESKRYWING NO TOOLBOX: 1 Five Layer Toolbo Steel (Cantilever Type) AANBEVOLE HANDELSMERK AANTAL 550 mm Gedore 1* 2 Pad Lock 40 mm Viro or Circle 1* FILES: 3 2nd Cut Flat File 250 mm with handle Nicholson 1* 4 2nd Cut Hand File 150 mm with handle Nicholson 1* 5 Bastard Flat File 300 mm with handle Nicholson 1* 6 2nd Cut Square File mm Nicholson 1* with handle 7 Needle Files Pherd 1* PUNCHES: 8 Prick Punch 1* 9 Center Punch Eclipse 1* 10 Pin Punches 1* HAMMERS: 11 Ball-Pein Hammer 300 gm R&W / Mitco 1* 12 Softface Hammer or Mallet Nylon Heads R&W / Mitco 1* MEASURING EQUIPMENT: 13 Vernier (0-150mm) Accuracy mm Mititoyo / Starret 1* 14 Engineering Square - Steel 100 mm M&W / Rabone 1* 15 Steel Ruler 150mm & 300 mm Starrett / Asahi 1* 16 Divider (Steel) 100 mm 1* 17 Dail Test Indicator & Range: 0-5 mm 1* Magnetic Base 18 Micrometer (Range: 0- Accuracy mm 1* 25mm) 19 Screw Cutting Gauge 60 /55 1* (Metric) PLIERS: 20 Pliers Engineer (Isolated) 200 mm Gedore 1 21 Radius gage Int & Et Edge Finder (Opsioneel) 1 23 Longnose Pliers (Isolated) 150 mm Gedore 1 24 Vice Grips - Vee Jaw 250 mm Gedore 1 25 Side Cutter (Isolated) 200 mm Gedore 1 SPANNERS & TOOLS: 26 Allen Keys (Metric) 1 mm to 10 mm Eight 1 Set 27 Allen Keys (Imperial) 1 Set 6
8 28 Hacksaw (Square frame 300 mm JBS / Kennedy 1* professional plus) 29 Screw Driver Set (7 piece Insulated Vera 1 Set set) 30 Scriber (Double Ended) 1* 31 Tinsnip Universal 1 Note: Brand Names are just an indication of quality M&W = Moore & Wright Other Names: King Tony / Micro-Tech * 'n Moet vir die 1ste fase daarna kan die res van items stuk-stuk aangekoop word soos nodig 7
9 Pas en Draai ITEM BESKRYWING NO TOOLBOX: 1 Five Layer Toolbo Steel (Cantilever Type) 8 AANBEVOLE HANDELSMERK AANTAL 550 mm Gedore 1* 2 Pad Lock 40 mm Viro or Circle 1* FILES: 3 2nd Cut Flat File 250 mm with handle Nicholson / Pferd 1* 4 2nd Cut Hand 150 mm with handle Nicholson / Pferd 1* 5 Bastard Flat File 300 mm with handle Nicholson / Pferd 1* 6 Bastard Square file mm Nicholson / Pferd 1* with handle PUNCHES: 7 Prick Punch Eclipse 1* 8 Center Punch 1* 9 Pin Punches Set 1* HAMMERS: 10 Ball-Pein Hammer 200 gm R&W / Mitco 1* 11 Softface Hammer or Mallet Nylon Heads 1* MEASURING EQUIPMENT: 12 Vernier (0-150mm) Accuracy mm Mititoyo / Starret 1* / Insise 13 Engineering Square - Steel 100 mm M&W / Rabone 1* 14 Steel Ruler 300 mm & 150 mm Starrett / Asahi 1* 15 Tape Measure 5 m (meter) Stanley 1* 16 Divider (Steel) 100 mm M&W / Rabone 1* 17 Micrometer (Range: 0-25mm) Accuracy mm 1 18 Screw Cutting Gauge (Metric) 60 /55 1* 19 Feeler Gauge Range: 0.03 up to 1 1* mm PLIERS: 20 Pliers Engineer (Isolated) 200 mm Gedore 1 21 Circlip Pliers - Inner (Straight) 150 mm Gedore 1 22 Circlip Pliers - Outer (Straight) 150 mm Gedore 1 23 Longnose Pliers (Isolated) 150 mm Gedore 1 24 Waterpump Pliers 300 mm Gedore 1 (Adjustable) 25 Vice Grips - Vee Jaw 250 mm 1 26 Side Cutter (Isolated) 200 mm 1 SPANNERS & TOOLS: 27 Combination Spanners (Ring - Flat) 6 mm to 24 mm 1 Set
10 28 Socket Wrenches Set Optional 1 Set (12Point) 29 Allen Keys (Metric) 1 mm to 10 mm 1 Set 30 Allen Keys (Imperial) 1/16-3/8 1 Set 31 Hacksaw (Square frame 300 mm Stanley 1* professional plus) 32 Screw Driver Set (7 piece Insulated 1 set) 33 Scriber (Double ended) 1* 34 Shifting Spanner 300 mm 1 35 Pipe Wrench (Bobbejaan) Capacity 35 mm 1 36 Tinsnip Universal 1 Note: Brand Names are just an indication of quality M&W = Moore & Wright Other Names: King Tony / Micro-Tech * 'n Moet vir die 1ste fase daarna kan die res van items stuk-stuk aangekoop word soos nodig Dial test indicator & Magnetic base is 'n moet! Vermy alle "no name brands" 9
11 Sweis ITEM BESKRYWING NO TOOLBOX: 1 Five Layer Toolbo Steel 10 AANBEVOLE HANDELSMERK AANTAL 550 mm Gedore 1 (Cantilever Type) 2 Pad Lock 40 mm Viro or Circle 1 FILES: 3 2nd Cut Flat File 250 mm with handle Nicholson 1 4 2nd Cut Hand 150 mm with handle Nicholson 1 5 Bastard Flat File 300 mm with handle Nicholson 1 6 Smooth Flat File 250 mm with handle 1 7 File Brush 1 PUNCHES: 8 Center Punch 1 HAMMERS: 9 Ball-Pein Hammer 300 g R&W / Mitco 1 MEASURING EQUIPMENT: 10 Vernier - MPFV15005 (0- Accuracy mm Starret / TA 1 150mm) 11 Steel Square 200 mm M&W / Rabone 1 12 Combination Square 45 deg. / deg./ 1 Adustable protractor 13 Steel Ruler 300 mm 1 14 Tape Measure 5 Meter 1 15 Divider (Steel) 150 mm 1 16 Spirit Level (Magnetic) 200 mm 1 PLIERS: 17 Pliers Engineer (Isolated) 200 mm Gedore 1 18 Side Cutter (Isolated) 200 mm Gedore 1 19 Pincers Grip Pliers 250 mm 1 20 Vice Grips - Vee Jaw 250 mm 1 SPANNERS & TOOLS: 21 Combination Spanners (Ring 10 mm to 24 mm 1 Set - Flat) 22 Allen Keys (Metric) 1 mm to 10 mm 1 Set 23 Allen Keys (Imperial) 1 Set 24 Chisel - Flat mm 1 25 Hacksaw (Square frame 300 mm 1 professinal plus) 26 Screw driver set (Isolated) 7 piece set 1 27 Scriber (Double ended) 300 mm 1 28 Shifting spanner 300 mm 1 29 Safety Glases 1 30 Welding Helmet 1 Note: Brand Names are just an indication of quality M&W = Moore & Wright Other Names: King Tony / Micro-Tech
12 Belê in jou toekoms 11
KING TONY LIST 2014 CODE DESCRIPTION 1/4"DR SOCKET SETS & ACESSORIES
Kingtony List 2014 CODE DESCRIPTION 1/4"DR SOCKET SETS & ACESSORIES 2021MR 1/4" DR SOCKET SET 4-13mm (19PCS) 2540MR 1/4" DR SOCKET SET 4-13mm (39PCS) C/W BITS 223508M 1/4" DR DEEP SOCKET 8mm 223510M 1/4"
More informationDatasheet RS Pro Tool Cabinet & Tool Module Kit
Datasheet RS Pro Tool Cabinet & Tool Module Kit RS Stock No: 125-3046 Central locking system Recessed work-top Low friction telescopic ball bearing slides, fully accessible drawers Side holder for spray
More informationMOBILE WORKSHOP SOLUTIONS
MOBILE WORKSHOP SOLUTIONS 2 4 Pro-line 300 6 Pro-line 400 8 Pro-line 200 10 Basic-line 12 Accessories 14 COMPLETO trays 15 COMPLETO Serie 4900 29 COMPLETO EVA3 Serie 4903 36 COMPLETO EVA Serie 4902 kraftwerktools.com
More information. 0 Insert Made Cat.-Nr
Hand tools. Insert Made Cat.-Nr. 963-969 Bicolour insert made of polyethylene (PE), colour black/blue. Resistant against most oils and chemicals thanks to closed-cell design. Contrasting colour and precisely
More informationSection One. Tool Kits & Sets
Section One Tool Kits & Sets 7 Tool Kits & Sets Kincrome Tool Workshops, Tool Chests & Tool Kits The quality and range to satisfy the most demanding user! Tool Workshop - The biggest of all Kincrome tool
More informationRATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
More informationLIST OF MACHINES/EQUIPMENT/ACCESSORIES/INSTRUMENTS TOOLS/AIDS WITH BROAD SPECIFICATIONS & ESTIMATED COST FOR MINI TOOL ROOM - VIZAG
LIST OF MACHINES/EQUIPMENT/ACCESSORIES/INSTRUMENTS TOOLS/AIDS WITH BROAD SPECIFICATIONS & ESTIMATED COST FOR MINI TOOL ROOM - VIZAG I. LIST OF ESSENTIAL MACHINES/EQUIPMENT WITH SUGGESTED QUANTITIES (Rs.
More informationSchedule. NO: SAMM 082 (Issue 2, 18 May 2018 replacement of SAMM 082 dated 8 December 2017) f applicable) Page: 5 of 40
Page: 5 of 40 Capability Plain Plug Gauge / Pin Gauge (Diameter) 10 mm to 100 mm 100 mm to 300 mm 0.4 µm Plain Gauge (Diameter) External Micrometer 50 mm frame 100 mm frame 150 mm frame 200 mm frame 300
More informationBetter hand tools - a simple philosophy.
PRODUCT CATALOGUE Better hand tools - a simple philosophy. Having left home at 16, my grandfather travelled the world for many years before settling in Toronto, Canada. During his travels, he met a wide
More informationVasals Engineering Industries, No. 33, First Floor, Govardhan Garden, J.C. Industrial Area, Kanakapura Road, Yelachenahalli, Bangalore, Karnataka
Last Amended on 01.06.2015 Page 1 of 8 I. DIMENSION 1. PLAIN PLUG 1 mm to 50 mm 2.2 µm Using LVDT Probe 100 mm to 200 mm 4.2 µm 0 Grade Gauge Blocks by Comparison 2. THREAD PLUG 3. TAPER PLAIN PLUG 4.
More informationCURRICULUM FOR SIX MONTH CERTIFICATE COURSE FITTING & PLUMBING UNDER DEVELOPMENT. Prepared By CURRICULUM DEVELOPMENT CELL
CURRICULUM FOR SIX MONTH CERTIFICATE COURSE IN FITTING & PLUMBING UNDER DEVELOPMENT Prepared By CURRICULUM DEVELOPMENT CELL INSTITUTE OF RESEARCH, DEVELOPMENT, TRAINING,U.P., KANPUR-208002 SIX MONTH CERTIFICATE
More informationContents: Contents: Contents:
JTC-39312 TOOL KIT JTC-39313 TOOL KIT JTC-5641+496 18 pcs combination wrench: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24. 9 pcs box wrench: 6 x 7, 8 x 9, 10 x 12, 11 x 13, 12 x
More informationSliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationHIT E VARIO. Workshop Trolleys Accessories MTS-Modules Tool Assortments. Become a MATADOR.
VARIO. Workshop Trolleys Accessories MTS-Modules Tool Assortments Become a MATADOR. VARIO Workshop Trolley xccasca info From an idea to a new standard. VARIO. Our new top modell VARIO is entirely newly
More informationWorking under tension V Tool cases. ...convincing solutions. Hard top tool cases, Leather tool cases
Working under tension 1000 V Tool cases Hard top tool cases, Leather tool cases...convincing solutions Tool cases 1000 V Tool case 1000 V made of plastic, complete with 3/8 tools. Dimension: 450 x 340
More informationalways the right accessories! NEW from kwb. The 5 kwb tool cases the proper solution for any requirement.
always the right accessories! NEW from kwb. The 5 kwb tool cases www.kwb.eu always the right accessories! 129x PH1 x 75 MM 2 MM - PHOO 3 MM - PHO 4 MM - PH1 1 x 4 x 1 MM 150 MM 4-6" 6 x 0 MM GS 200-250
More informationMicro-Flat Datums Pvt. Ltd., Plot No , Zone D-3, GIDC, Vitthal Udyognagar, Anand, Gujarat
Last Amended on 03.12.2015 Page 1 of 9 I. DIMENSION 1. CALIPERS $ L.C.: 0.01 mm Φ L.C.: 0.02 mm Φ 0 to 600 mm 0 to 1000 mm 0 to 2000 mm 9.37 µm 9.25 µm 14.64 µm Using Slip Gauge Set, Caliper Checker, Master
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationLUMBING & PIPELINE TOOLS. The contents of this product catalogue is a brief introduction of our full product range.
P LUMBING & PIPELINE TOOLS 60 The contents of this product catalogue is a brief introduction of our full product range. 61 48297 36620 97065 918-1 141 811A 815A Grooving 1-12 Schedule 10/40 2-1/2-4 1/8-2
More informationHANDTOOLS CATALOGUE. Shaping tools for you
TOOLS HANDTOOLS CATALOGUE Shaping tools for you P R I C E L I S T O K 0 / AUGUST RANGE INSIDE GLUE GUN UTILITY KNIFE RATCHET SCREW DRIVER CUTTING WHEEL TOOL POUCH AND BAG 7DRAWERS WORKSTATION Price List
More information$2, PC AF & METRIC TOOL KIT 11 DRAWER ROLL AWAY CABINET ATK338. Toolkit Catalogue 2018 Edition. kctools.com.au. since 1975
tools to last a lifetime kctools.com.au For the latest deals and special offers, follow us on Facebook 338 PC AF & METRIC TOOL KIT 11 DRAWER ROLL AWAY CABINET ATK338 since 1975 $2,900 11 drawer deep roll
More informationConnecting Mitutoyo Digimatic Devices to the Caliper2PC Interface A step by step Guide
Mitutoyo Digimatic Devices Mitutoyo is one of the world's leading manufacturers of precision measuring equipment, offering a huge range of professional products from micrometers, calipers to dial gauges.
More informationTHE CLEVER TOOL. TOTAL RANGE 17/18
THE CLEVER TOOL. TOTAL RANGE 17/18 YOUR CHALLENGE. OUR COMMITMENT. Tools from carolus by GEDORE convince through product innovation paired with functionality and ease of use, so they give our users the
More informationPROMOTION ENDS 31 MARCH
PROMOTION ENDS 31 MARCH 2018 QW BACK TO WORK 12 PC METRIC Reversible Combination Ratcheting Wrench Set SPEED // STRENGTH //ACCESS //RANGE 12 PC METRIC Open End Ratcheting Set + BONUS SPEAKER 8mm-19mm 239.00
More informationOnline version - not for reprint
(0) A Crankcase, Cylinder... X Tools, Extras... B Rewind starter... C Rewind starter ErgoStart... D Muffler... E Ignition system, Clutch... F Engine housing (Wrap around handle)... G Engine housing (Wrap
More informationNOTE ON PERFORMANCE TESTING
NOTE ON PERFORMANCE TESTING Performance Profile Sheet(s) are included in a format that can be easily photocop ied for each trainee. Performance tests are designed to mea sure competency in the tasks taught
More informationCalibration House, 71, Tarani Colony, Near Amir Vila, A. B. Road, Dewas, Madhya Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 8 I. DIMENSION 1. Calipers (Vernier/Dial/Digital) $ L.C.: 5 μm Φ 0 to 1000 mm 13.0 µm Using Caliper Checker, Gauge Block & Length Bar 2. Height Gauges $ (Vernier/Dial/Digital)
More informationTransparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationPIPE MANUFACTURERS LIMITED
PROMOTIONAL CATALOGUE a lot more than just pipes PIPE MANUFACTURERS LIMITED Mechanic s Tool Kit 60pc Model No. 679259 5 Tool Inserts & Metal Tray1/2 DRV Socket Set 8-32mm (Duometric) Combination Spanner
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0131 Valid Until Last Amended on - Page 1 of 10
Last Amended on - Page 1 of 10 I. DIMENSION 1. Angle Protractor Combination Set $ 0 to 180 35 min Using Angle Blocks, Sine Bar, Slip Gauges & Surface Plate by Comparison Method as per IS 4239 2. Bevel
More informationMK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
More informationPlasma Panel Replacement Guide DU-42PX12X
Plasma Panel Replacement Guide DU-42PX12X Panel Replacement: At this point, the panel has been determined to be defective and replacement is necessary. Upon receiving the replacement panel, it must be
More informationAMPRO PROFESSIONAL TOOLS
AMPRO PROFESSIONAL TOOLS Table of Contents SOCKETS AND SOCKET SETS... 7 STAR BIT SOCKET... 7 HEX BIT SOCKETS... 8 Tamper-proof star Bit Socket... 9 Tamper-Proof Hex Bit Socket... 10 Spline Bit Socket...
More informationTHE TOOLKITS LISTED BELOW ARE USED BY UNAVCO TO INSTALL PERMANENT POLAR GPS STATIONS
THE TOOLKITS LISTED BELOW ARE USED BY UNAVCO TO INSTALL PERMANENT POLAR GPS STATIONS HAND TOOLS Tool bucket Home Depot Fabric tool caddy Husky 53378 Field notebook and pencil 2 Wind turbine shorting plugs
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationMODEL R-502 ROUTER ITEM NO PART NO DESCRIPTION PRICE
1 6520038 CORD ASS'Y 1.5 X 2 X 2.5 FOR GBR (110V) 11.98 6520571 CORD ASS'Y 1 X 2 X 2.5 FOR GBR (240V) 13.98 6520025 CORD ASS'Y 1 X 2 X 2.2 EXCEPT ABOVE 13.79 2 6560044 CORD HOLDER 10 0.69 3 6560057 CORD
More informationElectronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 8 I. DIMENSION 1. PLAIN PLUG / WIDTH/ DEPTH / Upto 100 mm 2.0 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ Above 100 to 300 mm 3.0 µm Comparator with Stand
More informationPrices do not include imprint set-up or shipping. This presentation was produced from Total Awards & Promotions, Inc. 2009
Leveler features a 39 1/2" retractable metal tape measure which includes metric measurements and builders leveler across the top. Actual size is 1 3/4" x 1 3/4". 39 1/2" Global Direct Import Program -
More informationA M Supply Co. Hand Tools. Brad Nailers and Staplers Dewalt Hand Tools Heavey Duty Hammer Tacker. Heavy-Duty Staple & Brad Tacker
Brad Nailers and Staplers Dewalt Heavey Duty Hammer Tacker Part # Handle Length Max Staple Length Weight DWHTHT450 10.5".5" 2.50 lbs Heavy-Duty Staple & Brad Tacker Part # Handle Length Max Staple Length
More informationRYOBI 10 in. MITER SAW MODEL NO. TSS101L REPAIR SHEET
RYOBI in. MITER SAW MODEL NO. TSS1L REPAIR SHEET 2 1 3 4 9 7 8 13 12 6 14 66 1 16 19 18 20 2 26 71 64 70 28 6 64 0 23 22 21 17 24 63 0 68 73 69 72 0 67 62 61 72 9 8 60 2 6 3 7 4 74 2 0 27 28 29 30 31 32
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
More informationSTORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
More informationB - 5 DISC GRINDER
11-2010 9005B - 5 DISC GRINDER 1 2 51 3 15 7 8 9 18 16 11 10 20 7 22 35 36 19 12 13 14 23 24 37 52 25 27 26 57 38 50 17 29 39 28 41 40 30 49 31 48 55 A01 42 46 47 43 44 A02 A03 Item No Type Ref Part No
More informationTubbutec Sumtiple Kit Version Construction Manual
Tubbutec Sumtiple Kit Version Construction Manual This document describes the construction of the Sumtiple Kit. The following parts are included: 1x Sumtiple PCB with SMD-Parts already soldered 1x Front
More informationGRASS TRIMMER PARTS CATALOG MODEL SRM-2400 MODEL SRM-2410
GRASS TRIMMER PARTS CATALOG MODEL SRM-00 MODEL SRM- SERIAL NUMBER 000 & UP ECHO, INCORPORATED 00 OAKWOOD ROAD LAKE ZURICH, IL 00 0 0/ SRM-00/ ENGINE/EXTERNAL, INTERNAL, CRANKCASE, FAN HOUSING, COVER 0
More informationModel 2704 Parts List * = Standard Equipment 〇 = Circuit Diagram
2704 11-05 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 21 22 20
More informationABB DRIVES UK gland plate (+H358) ACS880-11, ACS880-31, ACH580-31, ACQ Installation guide
ABB DRIVES UK gland plate (+H358) ACS880-11, ACS880-31, ACH580-31, ACQ580-31 Installation guide Installation guide UK gland plate (+H358) ACS880-11, ACS880-31, ACH580-31, ACQ580-31 Table of contents 2018
More informationAssembly of the TACOS WAT-910BD Housing v2
1) Circuit Diagram 2) Assembly of PCB a)tools Required. Only simple hand tools are necessary to complete the assembly of the PCB. - Soldering Iron and solder - Needle nose pliers - Wire clippers/trimmers
More information3081 Test Leads Test Leads Test Leads
3081 Test Leads 4 mm safety plug system PVC-lead highly flexible, 0.8 mm 2 Safety plug at both ends Straight/angled, complying with Standard cable length: 500/1000/2000 mm Test Leads with Silicon-Isolation
More information102 Precision Measurement
102 Precision Measurement 4KU90 4KU86 4KU87 Outside Micrometers Quickly and easily adjusts to zero Features microfine graduations on satin chrome finish and carbide-tipped measuring faces. Ratchet stop
More informationLIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1
Model ROTARY HAMMER LIST F409 (E1) 2009 9 7 22% TU01658 DH28PD Rev.1 113 1 2 3 4 5 6 7 8 9 10 11 14 15 16 20 21 17 18 22 23 24 25 29 27 30 31 19 32 33 34 35 36 37 38 62 63 64 67 68 69 65 66 70 71 72 73
More informationComputer Technician. Technicians Tools. Copyright Texas Education Agency, All rights reserved. 1
Computer Technician Technicians Tools 1 Enabling Objectives Introduction to standard tools Introduction to specialized tools and supplies Introduction to software tools The domestic tools The foreign tools
More informationImpact & Drop Weight Testing Machine. JB Series Semi-automatic Pendulum Impact Testing Machine. Application:
JB Series Semi-automatic Pendulum Impact Testing Machine Application: JB series impact testing machines are used to determine the impact toughness of metal materials under dynamic load. The pendulum of
More informationCreative Calibration Centre, Plot No.-3802, Laxman Vihar, Phase-I, Gurgaon, Haryana. Discipline Mechanical Calibration Issue Date
Last Amended on 21.07.2015 Page 1 of 10 I. DIMENSION 1. HEIGHT GAUGE $ (Digital/Dial/Vernier) L.C: 0.01 mm Φ 0 to 300 mm 0 to 600 mm 8.1 µm 12 µm Using Slip Gauge Blocks & Accessories & Caliper Checker
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0386 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. CALIPER $ (Vernier / Dial / Digital) L. C. 10µm Φ Up to 600 mm >600 mm to 1000 mm 14.0 µm 19.0 µm Using Gauge Block Set, Caliper Checker, Length Bar & External
More informationLaser Alignment. For the Epilog Fusion CO2 10/10/2013
EPILOG LASER 16371 Table Mountain Parkway Golden, Colorado 80403 Phone 303-215-9171 FAX 303-277-9669 www.epiloglaser.com For the Epilog 10/10/2013 Requirements: Tools: 5/32 Allan Wrench 3/32 Allan Wrench
More informationPIONJÄR. Spare parts list. Petrol drills and breakers 120, 120 AV, 121 A, 130, 130 AV, 131 A
PIONJÄR 0, 0 AV, A, 0, 0 AV, A Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 00 0b 00 PIONJÄR 0, 0 AV, A, 0, 0 AV, A Contents Contents General Information................................................................
More informationQ2 XBee Handheld Controller Assembly Guide
Q2 XBee Handheld Controller Assembly Guide Copyright Quantum Robotics Inc. Q2 Controller V1.0 1 Parts List: The kit comes with 14 individual bags. 1. Case Top and Bottom 2. Case Screw Package containing:
More informationCOBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c
COBRA COMBI Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 0 0c 00 COBRA COMBI Contents Contents General information................................................................
More informationCOMPLETE S YSTEM SHELTER
COMPLETE S YSTEM SHELTER The weather-resistant Complete System Shelter (CSS) provides protection from the elements for system components such as the console, Solar Power Kit components, sensor interface
More information4-Other arc welding 4-1
-Other arc welding OTHER ARC WELDING Cables and connectors............................... -2 to -3 Clamps................................................................... - to -5 Magnetic ground clamps.............................
More information198. PROFILE ON TVET
198. PROFILE ON TVET 198-2 TABLE OF CONTENTS PAGE I. SUMMARY 198-3 II. SERVICE DESCRIPTION & APPLICATION 198-3 III. MARKET STUDY AND SERVICE CAPACITY 198-4 A. MARKET STUDY 198-4 B. SERVICE CAPACITY & OPERATIONAL
More informationReliance Calibration Laboratory, Sr. No. 21/7, (Gokul Nagar, Narhe), Lygude Estate, Dhayari-Sinhgad Road, Pune, Maharshtra
Last Amended on 20.10.2014 Page 1 of 8 I. DIMENSION 1. Caliper $ (Digital/ Dial/ Analogue) L.C.: 0.01 mm ф 0 to 300 mm 0 to 600 mm 0 to 1000 mm 14.0 µm 15.0 µm 19.0 µm Using Caliper Checker & Length Bars
More information"B" COLLETS SOYER COLLETS
STUD DIA. 3 mm CDB-003M 14 Ga CDB-008 12 Ga & #4 CDB-010 1/8 Ga & #5 CDB-012 10 Ga & #6 CDB-013 4 mm CDB-004M #8 CDB-015 #10 & 5 mm CDB-018 6 mm CDB-006M.215" CDB-021 1/4" CDB-025 5/16" & 8 mm CDB-031
More informationCS50 Chain Saw UT B Page 1 of 17 Accessories
CS50 Chain Saw UT-10710-B Page 1 of 17 Accessories CS50 Chain Saw UT-10710-B Page 2 of 17 Accessories A02177 1 BUMPER SPIKE KIT 7031099 1 S RUBBER TUBING (10') 18453 1 /P GREASE-Multi-Purpose (Sprocket
More informationEvery tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
More informationDIGIPLAN presents. Portable Folding Chair. Unfolded View. Folded Side View. 2004/01/02 rev
WWW..DIGIPLN..C DIGIPLN presents Portable Unfolded View Folded Side View 00/0/0 rev.0 WWW..DIGIPLN..C We are offering these plans for no charge as an example of what you can expect when you purchase other
More informationPTZ 140 Camera Head and Kits
PTZ 140 Camera Head and Kits PTZ6.0140AHDNB NTSC Camera head. 25x optical, 12x digital for a total of 300x total zoom. Dual 35 watt focused dichroic lamps. Includes strain relief cable part number PTZ6.0140AHDPB
More informationRigging and Miscellaneous Fittings
Turnbuckle Eye & Eye 0006 4MM 0121 5MM 0122 6MM 0123 8MM 0124 10MM 0125 12MM 0126 16MM Turnbuckle Jaw & Jaw 0137 5MM 0138 6MM 0139 8MM 0140 10MM 0141 12MM 0142 14MM 0143 16MM Turnbuckle Hook & Hook 0001i
More informationTools and Testers. Section Contents TOOLS AND TESTERS
Tools and Testers Siemon offers an extensive line of test equipment and tools designed to help cabling professionals simplify the delivery of high-performance cabling systems. Including the easy-to-use
More informationHeavy Duty Tool Trolleys New 1475K Series
A registered trademark of SNA Europe Group Heavy Duty Tool Trolleys New 1475K Series BAHCO TOP LINE TOOL STORAGE - 1475K SERIES SIZE 40" And the family grows THE ULTIMATE TROLLEY ASSORTMENT Stronger, reliable
More informationAdendorff Machinery Mart https://www.adendorff.co.za
SKU Product Price TWRENT-008 3/8 DRIVE 6-30 NM TORQUE WRENCH R 895.00 HSHUMP-001 HCPROT-002 HWSTOP-001 HSHUMP-002 HCPROT-001 HCPROT-003 MAC AFRIC Speed Hump Middle Body with Cat Eyes (100x35x5cm) MAC AFRIC
More informationSB 152. Spare parts list. Hydraulic breakers Atlas Copco Construction Tools AB No f
SB Spare parts list Hydraulic breakers 0 Atlas Copco Construction Tools AB No. 900 00 0f 00 SB Contents Contents General information................................................................ Spare
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E478 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2004 5 30 (E1) 1 2 3 4 5 6 23 24 7 8 9 10 25 26 17 18 27 28 29 30 31 32 33 34 11 35 12 36 13 14 37 38 15 16 19 20 21 22 54 55
More informationRyobi 12 in. Sliding Compound Miter Saw With Laser Model No. TSS120L Repair Sheet
Ryobi in. Sliding Compound Miter Saw With Laser Model No. TSS0L Repair Sheet 42 3 3 41 43 44 4 4 4 48 4 0 4 40 3 38 33 3 1 32 2 3 32 1 2 1 0 8 31 31 4 3 1 8 34 4 3 30 2 21 22 23 24 2 18 1 28 2 1 14 2 13
More informationLIST NO. F423 ROTARY HAMMER (E1) Model DH 28PMY
Model ROTARY HAMMER LIST F423 2014 4 2 (E1) A A 5 6 7 8 9 17 18 19 20 21 22 23 11 13 14 15 12 24 25 26 27 28 29 30 31 32 33 34 35 36 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
More informationAUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
More informationHow to build an Olympus D-360L Trail Camera using the PixController Universal "Digital Trail Camera Kit" w/ RS-232-U PIC Chip
Copyright, PixController, Inc. http://www.pixcontroller.com, all rights reserved. How to build an Olympus D-360L Trail Camera using the PixController Universal "Digital Trail Camera Kit" w/ RS-232-U PIC
More informationGET PROFESSIONAL, NOW!
NEUE PRODUKTE GET PROFESSIONAL, NOW! 3812-0576 ALLE WERKZEUG-SETS: 3812-0577 WE SUPPORT THE SPORT ALL CATEGORIES COMBINATION SPANNER DIN 3113 form A/ISO 7738 form A 5,5 mm 3812-0277 6 mm 3812-0278 7 mm
More informationMICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
More informationgastroparts NARZĘDZIA Części zamienne do urządzeń: GASTROPARTS Sp. J.
www.gastroparts.pl gastroparts NARZĘDZIA Części zamienne do urządzeń: NARZĘDZIA GASTROPARTS Sp. J. Klonowica 37 87-00 Toruń tel. +48 56 657 00 68 fax +48 56 657 00 67 gastroparts@gastroparts.pl www.gastroparts.pl
More informationTools for General Repairs
10 10-01 Magnetic Lifter (flexible) KL-0126-2 KL-0126-204 KL-0126-203 KL-0126-202 Magnetic Tools (Telescopic Design) KL-0126-205 KL-0126-206 KL-0126-212 KL-0126-20 Magnetic Lifter KL-0126-2 Magnetic Lifter
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
SERIES 207: MICROMETER DEPTH GAGES STARRETT SERIES 440, 445: Length No. of Order Range of Base Rods No. 0-4 2-1/2 4 5001502 0-4 4 4 5001503 0-6 4 6 5001504 The depths of holes, slots, shoulders, and projections
More informationVEUE WIRE GUIDE INSTALLATION MANUAL. June 2016
VEUE WIRE GUIDE INSTALLATION MANUAL June 2016 CONTENTS June 2016 This manual is to be read in conjunction with the Product Specifications & Assembly manual SECTION NO. DESCRIPTION PAGE NO. SECTION 1 ITEMS
More informationROTARY HAMMER Model DH 26PC
LIST F418 ROTARY HAMMER Model 2013 5 22 (E1) 1 2 18 19 20 3 4 5 6 21 22 7 8 53 23 24 25 26 27 A 28 29 30 31 11 32 12 33 34 13 35 14 36 15 24 37 16 17 9 A 10 54 41 64 65 55 56 57 58 59 60 42 43 44 45 46
More informationLIST NO. F421 ROTARY HAMMER (E1) Model DH 24PH
Model ROTARY HAMMER LIST F421 2013 5 22 (E1) A 29 73 1 2 3 4 5 6 7 17 8 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 A 501 502 503 38 39 9 24 17 40 41 42 43 44 45 46 47
More informationSB 302. Spare parts list. Hydraulic breakers. Valid from serial number Atlas Copco Construction Tools AB No f
SB 0 Spare parts list Hydraulic breakers SB 0 Valid from serial number BES 0 Atlas Copco Construction Tools AB No. 900 0 0f 0 SB 0 Contents Contents General information................................................................
More informationRYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20
A0 OUTFEED SUPPORT RYOBI in. ( mm) TABLE SAW - MODEL NO. BTS0 FIGURE B: OUTFEED SUPPORT 0 OUTFEED SUPPORT... 0 SCREW (/-0 x / in.)... 00 OUTFEED SUPPORT ROD... 00 STOP SCREW (M X mm)... FIGURE C: BLADE
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationWinter 2017 Promotions **Cannot be combined with any other Promo**
Winter 2017 Promotions **Cannot be combined with any other Promo** Pricing Ends March 31, 2017 Sales Deal # XXXXXX Part # Item List Promo 81011P 1/4" Drive 120XP Full Polish Teardrop Ratchet 51.37 19.65
More informationOnline version - not for reprint
(0) A Engine housing... B Cylinder... B Cylinder... C Rewind starter, Ignition system... C Rewind starter, Ignition system... D Chain brake... E Quick tensioner parts... F Air filter, Cover... G Handle
More information300 Chain Saw UT Page 1 of 17 Accessories I
300 Chain Saw UT-10687 Page 1 of 17 Accessories I 300 Chain Saw UT-10687 Page 2 of 17 Accessories I A-02177 A02177 1 BUMPER SPIKE KIT 9477299 9477299 1 /P RUBBER TUBING (10') 18453 18453 1 /P GREASE- Multi-Purpose
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationCIMCO apprentice case... for tomorrows professionals
Promotion CIMCO apprentice case... for tomorrows professionals Start your apprenticeship well prepared: The easiest way for a young apprentice electrician to do this is to have the right tools. CIMCO has
More informationMW-2012E PRODUCT CATALOGUE 12/13. Partners in Precision INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE
MW-2012E PRODUCT CATALOGUE 12/13 INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE MOORE & WRIGHT A Brief History... Founded in 1906 by innovative young engineer, Frank
More informationPRODUCT RANGE JUNE 2017
PRODUCT RANGE JUNE 2017 INDEX...4 PAINTING TOOLS...100 Caulking gun Paint mixer Scrapers ABOUT STACO...6 About STACO STACO NORDIC Social responsibility Packings and displays Newsletter Heavy Duty-Series
More informationCord- Mounted Female. Mounted Male. Strain relief clamp # needs to be ordered separately w/cord-mounted connections.
-Pin Amp Plastic 0883 Kit (consists of) 080 Receptacle 03 Pins (Qty ) 088 Kit (consists of) 080 Connector 03 Sockets (Qty ) Note: Strain relief clamp 03 needs to be ordered separately with cord-mounted
More informationDescription: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447
Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake
More information