Schedule. NO: SAMM 082 (Issue 2, 18 May 2018 replacement of SAMM 082 dated 8 December 2017) f applicable) Page: 5 of 40
|
|
- Barry Thornton
- 5 years ago
- Views:
Transcription
1 Page: 5 of 40 Capability Plain Plug Gauge / Pin Gauge (Diameter) 10 mm to 100 mm 100 mm to 300 mm 0.4 µm Plain Gauge (Diameter) External Micrometer 50 mm frame 100 mm frame 150 mm frame 200 mm frame 300 mm frame 400 mm frame 450 mm frame 600 mm frame Caliper Checker Dial / Digimatic & Vernier Caliper Dial Gauge 10 mm to 100 mm 100 mm to 300 mm Up to 25 mm 0 mm to 200 mm 200 mm to 450 mm 45 1,000 mm to 1,500 mm 1,500 mm to 2,000 mm 0 mm to 50 mm 0.4 µm 1 µm 1.1 µm µm 1.6 µm 3 µm 5 µm 7 µm 17 µm 23 µm ISO 3611:2010 based on ISO 7863:1984 ISO :2011 Dial Gauge Calibrator based on BS 907:2008 Dial Test Indicator 0 mm to 50 mm Dial Gauge Calibrator based on BS 2795:1981 Dial / Digimatic & Vernier Height Gauge 0 mm to 450 mm µm 7.7 µm ISO 13225:2012 Height Setting Micrometer & Riser Block 3 µm based on ISO 7863:1984
2 Page: 6 of 40 Capability Screw Plug (simple pitch diameter) Screw (simple pitch diameter) Gauge Block Set Grade Steel Rulers Vee Blocks Bubble Levelling Gauge 1 25 mm to 50 mm 50 mm to 75 mm 75 mm to 100 mm 1,000 mm to 3,000 mm 220 mm x 160 mm x 80 mm Height in respect to length 0.02 mm/m to 0.25 mm/m µm 0.14 µm 0.16 µm 0.2 mm 0.5 mm 4 µm 6 µm/m based on ISO 3650:1998 Standard Scale 7516:2005 Dial Test Indicator based on JIS B 7540:1972 Bubble Tube Tester and Dial Test Indicator 7510:1993 Cylinder Gauge 1 µm and Gauge JIS B 7515:1982 Internal Micrometer 25 mm to 100 mm 10 and Gauge BS 959:2008 Setting Rod 25 mm to 100 mm µm 2. and Gauge BS 870:2008
3 Page: 7 of 40 Capability Thickness Coating Film 0 mm to 2.5 mm and Gauge BS 5411 Pitch Gauge Radius Gauge Test Sieves Mµ Checker Feeler Gauge (Thickness) Dial Gauge Calibrator 0 mm to 12 mm 0 mm to 100 mm 0 mm to 200 mm 0 mm to 3 mm 0.01 mm to 10 mm Profile Projector Profile Projector Profile Projector 7536 : 1982 Precision Micrometer 957:2008 Precision Digital Linear Probe 7519:1994 Depth Gauge 25 mm to 100 mm 100 mm to 300 mm 1.4 µm 2.0 µm 6468:2008 Thickness Gauge 10 mm to 65 mm µm 7519:1994 Snap Gauge 0 mm to 100 mm 100 mm to 200 mm 0.4 µm 0.6 µm and Setting
4 Page: 8 of 40 Capability Taper Plain Plug Diameter 20 mm to 300 mm and Setting Taper Plain Diameter Taper Thread Plug Pitch Diameter Taper Thread Pitch Diameter 20 mm to 300 mm and Setting and Setting Length Bar 125 mm 150 mm 175 mm 200 mm 250 mm 300 mm 400 mm 500 mm 0.63 µm 0.71 µm 0.79 µm 0.87 µm µm 2.3 µm and Gauge Blocks
5 Page: 9 of 40 Capability Measuring Tape 1. Steel type 2. Fabric type Holtest Bevel Protractor Up to 1,000 mm 2,000 mm 5,000 mm 8,000 mm 10,000 mm 20,000 mm 30,000 mm 50,000 mm 100,000 mm Up to 1,000 mm 2,000 mm 5,000 mm 8,000 mm 10,000 mm 20,000 mm 50,000 mm 100,000 mm 0 mm to 175 mm 175 mm to 200 mm 0 to mm 0.17 mm 0.26 mm 0.33 mm 0.37 mm 0.53 mm 0.64 mm 0.83 mm 1.2 mm 0.12 mm 0.17 mm 0.27 mm 0.34 mm 0.38 mm 0.53 mm 0.84 mm 1.2 mm 1 µm 0.6 scale and tape calibration unit 7512:1993 scale and tape calibration unit 7522:2005 Master Gauge based on DIN 863-4:1999 for repeatability test only inclinometer and Feeler Gauge 1685:2008 Signatories: 1. Seah Leong Ho 2. Chin Inn Nkot 3. Kayalvili a/p Munusamy 4. Norita binti Md. Ali
6 Page: 10 of 40 SITE: CATEGORY I Capability Measuring Projector (individual linear axis only) Co-Ordinate Measuring Machine Caliper 0 mm to 50 mm 50 mm to 100 mm 100 mm to 200 mm 200 mm to 300 mm 1,000 mm to 1,500 mm 1,500 mm to 2,000 mm 1.7 µm 1.9 µm 3.5 µm 17 µm 23 µm Glass Scale, Precision Ball and Reading Scale based on JIS B7184:1999 Ball Bar Set, Long Gauge Block, Gauge Block Set and Thermometer with Sensor based on ANSI/ASME B89:1997 ISO :2011 Micrometer (External) ISO Linear Height Gauge ISO : 2012
7 Page: 11 of 40 SITE: CATEGORY I Capability Surface Plate Flatness Signatories: 1. Seah Leong Ho 2. Chin Inn Nkot 600 mm x 600 mm 800 mm x 800 mm 1m x1m SITE: CATEGORY I 1.3 µm 1.8 µm 2. Capability Planekator, Repeat-O-Meter and Micro- Comparator 817:2008 Measuring Microscope (Individual linear axis only) 0 mm to 200 mm 2. Glass Scale 7153:1995 Signatories: 1. Seah Leong Ho
Vasals Engineering Industries, No. 33, First Floor, Govardhan Garden, J.C. Industrial Area, Kanakapura Road, Yelachenahalli, Bangalore, Karnataka
Last Amended on 01.06.2015 Page 1 of 8 I. DIMENSION 1. PLAIN PLUG 1 mm to 50 mm 2.2 µm Using LVDT Probe 100 mm to 200 mm 4.2 µm 0 Grade Gauge Blocks by Comparison 2. THREAD PLUG 3. TAPER PLAIN PLUG 4.
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0131 Valid Until Last Amended on - Page 1 of 10
Last Amended on - Page 1 of 10 I. DIMENSION 1. Angle Protractor Combination Set $ 0 to 180 35 min Using Angle Blocks, Sine Bar, Slip Gauges & Surface Plate by Comparison Method as per IS 4239 2. Bevel
More informationCalibration House, 71, Tarani Colony, Near Amir Vila, A. B. Road, Dewas, Madhya Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 8 I. DIMENSION 1. Calipers (Vernier/Dial/Digital) $ L.C.: 5 μm Φ 0 to 1000 mm 13.0 µm Using Caliper Checker, Gauge Block & Length Bar 2. Height Gauges $ (Vernier/Dial/Digital)
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 8 I. DIMENSION 1. PLAIN PLUG / WIDTH/ DEPTH / Upto 100 mm 2.0 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ Above 100 to 300 mm 3.0 µm Comparator with Stand
More informationMicro-Flat Datums Pvt. Ltd., Plot No , Zone D-3, GIDC, Vitthal Udyognagar, Anand, Gujarat
Last Amended on 03.12.2015 Page 1 of 9 I. DIMENSION 1. CALIPERS $ L.C.: 0.01 mm Φ L.C.: 0.02 mm Φ 0 to 600 mm 0 to 1000 mm 0 to 2000 mm 9.37 µm 9.25 µm 14.64 µm Using Slip Gauge Set, Caliper Checker, Master
More informationCreative Calibration Centre, Plot No.-3802, Laxman Vihar, Phase-I, Gurgaon, Haryana. Discipline Mechanical Calibration Issue Date
Last Amended on 21.07.2015 Page 1 of 10 I. DIMENSION 1. HEIGHT GAUGE $ (Digital/Dial/Vernier) L.C: 0.01 mm Φ 0 to 300 mm 0 to 600 mm 8.1 µm 12 µm Using Slip Gauge Blocks & Accessories & Caliper Checker
More informationReliance Calibration Laboratory, Sr. No. 21/7, (Gokul Nagar, Narhe), Lygude Estate, Dhayari-Sinhgad Road, Pune, Maharshtra
Last Amended on 20.10.2014 Page 1 of 8 I. DIMENSION 1. Caliper $ (Digital/ Dial/ Analogue) L.C.: 0.01 mm ф 0 to 300 mm 0 to 600 mm 0 to 1000 mm 14.0 µm 15.0 µm 19.0 µm Using Caliper Checker & Length Bars
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0386 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. CALIPER $ (Vernier / Dial / Digital) L. C. 10µm Φ Up to 600 mm >600 mm to 1000 mm 14.0 µm 19.0 µm Using Gauge Block Set, Caliper Checker, Length Bar & External
More informationExcel Calibration Private Limited, No. 101, Legend Constructions, No /101, Barkathpura, Hyderabad, Telangana
Last Amended on 10.03.2016 Page 1 of 5 I. DINENSION 1. GAUGE BLOCKS $ (Grade 0, I & II) 0.5 mm to 10 mm 0.4 µm Using Gauge Block 10 mm to 25 mm 0.6 µm Comparator & Slip Gauges 25 mm to 50 mm 0.7 µm 50
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-1056 Valid Until Last Amended on - Page 1 of 8. 0.
Last Amended on - Page 1 of 8 I. MASS 1. Weights (Conventional) $ 1 mg 0.020 mg F2 Class Standard Weights 2 mg 0.020 mg and Mass Comparator 5 mg 0.021 mg (Readability: 0.001/0.01 10 mg 0.022 mg mg) Calibration
More informationSIMCO Calibration Laboratory, 101/102, Sri Balaji Home, Plot No: 258, Teacher's Colony, Secunderabad, Telangana
Last Amended on 03.02.2015 Page 1 of 5 I. PRESSURE & VACUUM 1. Pressure Gauge /Pressure Switch/ Pressure Transmitters / Pressure Indicator $ 0 to 3 bar 0.18% of rdg Using digital test gauge and Hand pump
More informationSri Calibrations Services, H. No /3/A, Fl. No. S1 & S2, Nomula Lakshmi Residency, Seethaphalmandi, Secunderabad, Telangana
Last Amended on 03.08.2015 Page 1 of 7 I. DIMENSION 1. Caliper (Digital/Vernier/Dial) $ L.C.: 0.01mm Φ Upto 300 mm 0.011 mm Using Caliper Checker & Gauge Block Set by 2. Depth Caliper $ (Vernier/Dial)
More informationIn-house based 1on OIML- R kg to 20 kg 10 kg to 20 kg
MASS BALANCE: Mechanical, Electronic VOLUME DENSITY Condition: On-site charge equipment 500.- but minimum charge 1000.- Analytical balance 0 mg to 200 g readability 0.0001 g 1 mg to 200 g CSIRO 3,000.-
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationLength, United States, NIST (National Institute of Standards and Technology)
Calibration or s Laser radiations Other stabilized laser: vacuum wavelength Optical beat frequency 633 633 4E-10 2 95% Yes 1 Length instruments Laser system: error of indicated L Comparison to master length
More informationMICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationMeasuring instruments and systems 2009 mechanical optical electronical
Measuring instruments and systems 2009 mechanical optical electronical Calipers 906.300 Digital calipers 75 mm 906.483 100 mm 906.484 150 mm 906.300 200 mm 906.302 906.304 Left-handed digital caliper 150
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationLength, Germany, PTB (Physikalisch-Technische Bundesanstalt)
Laser radiations Laser radiations Laser radiations Laser radiations Length Length Frequency stabilized laser (He- Ne): vacuum wavelength Frequency stabilized laser (He- Ne): absolute frequency Frequency
More informationTel mm mm mm mm mm
PRECISION VERNIER CALIPER DIGITAL ELECTRONIC CALIPER VVC-6 0.4 2023-001 VVC-8 0.02 mm 1/1000 0.5 2023-002 VVC-12 0.8 2023-003 VEC-6 0.4 2023-010 VEC-8 0.01 mm 0.5 2023-011 VEC-12 0.8 2023-012 DIAL CALIPER
More informationSliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationLength, Singapore, NMC, A*STAR (National Metrology Centre, Agency for Science, Technology and Research)
Calibration or m 633 633 nm 0.5 MHz 2 95% No LS/L/001 633 633 nm 0.016 fm 2 95% No LS/L/003 474 474 THz 12 khz 2 95% No LS/L/003 543 633 nm 0.0016 fm 2 95% No LS/L/003 553 474 THz 1.2 khz 2 95% No LS/L/003
More informationELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code
ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare
More informationMeasuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
More information0-1 /0-25mm Optional Accessories MSLP SALE 05CZA662 SPC cable (40 / 1m) $ $ CZA663 SPC cable (80 / 2m) $ $133.
Winter 2012 Prices effective from Jan. 3 to Apr. 30, 2012 New Year Sale Featuring Mitutoyo Precision Measuring Tools & Instruments Cable #02AZD790B Coolant Proof Micrometers - Ratchet Stop Range Order
More informationHoltest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
More informationMetrology. Jubilee campaign first half of Anniversary Gift. Vernier Caliper 100 mm. Exclusively available from specialized dealers
Metrology Anniversary Gift Vernier Caliper 100 Join the celebration and make sure to receive a caliper with our compliments Exclusively available from specialized dealers Jubilee campaign first half of
More informationd for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Quality Engineering Service of the Chippewa
More informationEvery tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
More informationMetrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers
800 SECTION H Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS
More informationElectronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
More informationAuxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
More information7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
More informationV-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
More informationMulti-functional Length Calibrator
Multi-functional Length Calibrator Invented Design Manufacture Taiwan invention patent German innovation patent United States invention patent Multi-functional Length Calibrator Multi-functional Length
More informationHorizon Premium. Length Measuring and Setting Instrument. The new Trimos Horizon Premium
410 Horizon Premium Length Measuring & Setting Instrument The new Trimos Horizon Premium Length Measuring and Setting Instrument fulfills todays requirements of high accuracy quality control equipment.
More informationDepth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type
epth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range in mm increments. Ratchet stop provides constant force.
More informationBEST DEALS. TESA Brown & Sharpe quality measuring instruments at the best prices. HexagonMI.com TESAtechnology.com
BEST DEALS TESA quality measuring instruments at the best prices. Valid until 08.31.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com TESA-HITE 400/700 Robust and reliable. Ideally
More informationHUGE SAVINGS! LIMITED TIME ONLY!
Valid from Aug. 17, 2015 to Dec. 31, 2015 Prices Subject to Change Without Notice & Stock Availability. Mitutoyo Savings! Dial Calipers - Series 505 Resolution:.001 Extra-rigid main beam Sliding surfaces
More informationAUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
More informationGAUGE BLOCKS REFERENCE GAUGES E-01
GAUG BLOCKS RFRNC GAUGS -01 Gauge Blocks Reference Gauges Gauge Blocks Reference Gauges Contents Gauge Blocks Features and Accuracies Metric Gauge Block Sets Inch Gauge Block Sets Micrometer Inspection
More informationMitutoyo General Catalog
Mitutoyo General Catalog Laser scan micrometer List of products Move to other products LSM-500H/501H/503H/506H/512H LSM-902/6900 1 SPC 2 Caliper 3 Depth gage 4 Height gage 5 Micrometer 6 Inside micrometer
More informationSummer Promo Precision Tool & Instruments Prices effective July 1st through Sept. 30th, Unless noted otherwise
S u m m e r 2 0 1 4 S p e c i a l s Summer Promo 2014 Precision Tool & Instruments Prices effective July 1st through Sept. 30th, 2014. Unless noted otherwise Season 2014 S u m m e r 2 0 1 4 S p e c i
More informationDepth Gage A standard measuring tool of industry
epth Gage standard measuring tool of industry epth Micrometer SERIES 329, 129 Interchangeable Rod Type This type uses interchangeable rods to enable wide-range measurement. Order Nos. 329-250-30, 329-251-30,
More informationS_Cal PRO. Professionnal Caliper DESCRIPTION
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
More informationProgressive Trading Corporation
+91-8048760385 Progressive Trading Corporation https://www.indiamart.com/progressivetradingcorporation/ The Only Place Where You Can Purchase The Full Range Of Mitutoyo Metrology Measuring Instruments,
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationlu~u1b~~b~u~u~n11 el1atje)1'ljl'<\l19l1:ufldl:ub'u'y'l1~11"lfururu~nl1:u1191'hi1'ubbvi.:l"lfl~ 'Y'l.f "'''' 03
L._ " uuu fl:lj'lj./'ujej.l!j 1'U-r'U';jB:jl~'U~ 15(077/0236 lu~u1b~~b~u~u~n11 el1atje)1'ljl'
More informationDigimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE
D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic
More informationLIST OF MACHINES/EQUIPMENT/ACCESSORIES/INSTRUMENTS TOOLS/AIDS WITH BROAD SPECIFICATIONS & ESTIMATED COST FOR MINI TOOL ROOM - VIZAG
LIST OF MACHINES/EQUIPMENT/ACCESSORIES/INSTRUMENTS TOOLS/AIDS WITH BROAD SPECIFICATIONS & ESTIMATED COST FOR MINI TOOL ROOM - VIZAG I. LIST OF ESSENTIAL MACHINES/EQUIPMENT WITH SUGGESTED QUANTITIES (Rs.
More informationThickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
More informationDigimatic Caliper. Digimatic Height Gages. Linear Height. Depth Gages. New Products. SuperCaliper ABSOLUTE. Coolant Proof Caliper ABSOLUTE
Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages New Products SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper INDEX Caliper
More informationPrecision Tools & Instruments Prices effective from Jan. 1 - Apr. 30, 2010 or while quantities last. Some items may not be exactly as shown.
WINTER FLYER 2010 Precision Tools & Instruments Prices effective from Jan. 1 - Apr. 30, 2010 or while quantities last. Some items may not be exactly as shown. QuantuMike Micrometer SERIES 293 For significant
More informationSPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION
Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system
More informationi-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54
i-checker SERIES 170 EATURES The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4"). ±(0.2+L/100)µm
More informationDigital Measurement Metrology, Inc. Bulletin No Digital Measurement Metrology, Inc PRECISION IS OUR VISION
Bulletin No. 2021 Profile Projectors A series of midsize profile projectors featuring bright, 12.40" (315mm) diameter screens and easy-to-operate XY measurement tables. Easy-to-read digital counters are
More informationNew Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.
Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationHeightmatic SERIES 574 High Precision Height Gage
Height Gages Heightmatic 159 Digimatic Height Gage 160 ABSOLUTE Digimatic Height Gage 162 Dial Height Gage 164 Vernier Height Gage 166 CERA Caliper Checker 168 Carbide-tipped Scriber 169 Optional Accessories
More informationpage page page Measurements page page science
1 page 2 page 3 page 4 page 6 Measurements page 10 2 measurements Length Ruler Wood. Length: 50 cm, graduated in millimetres and centimetres. Horizontal reading. 1405.00 Ruler 1405.00 Ruler Wood. Length:
More informationPopular Items Recomended
1 2 CALIPER Vernier Caliper - Standart Type Round depth bar (30-102) OD measurement ID measurement 530-101 Step measurement Depth measurement MT0000098 530-101 0-150MM 0.05MM - MT0000099 530-102 0-150MM
More informationi-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved
More informationALL-INCLUSIVE, EASY TO USE
THE ESSENTIAL METROLOGY CATALOGUE 16/17 Partners in Precision Micrometers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016
More informationPrecision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
More informationDoes everything rotate around precision? no problem with Micromar.
Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers
More informationHUGE SAVINGS! LIMITED TIME ONLY!
Valid from April 1, 2016 to June 30, 2016 Prices Subject to Change Without Notice & Stock Availability. Mitutoyo Savings! Precision Measuring Tool Kits INCLUDES: (500-196-30) 0-6 /0-150mm Digimatic Caliper
More informationLABMASTER AUTOMATIC. Pratt & Whitney. Model 1000A UNIVERSAL MEASURING SYSTEM. Measurement Systems, Inc.
AUTOMATIC Pratt & Whitney Measurement Systems, Inc. The Standard of Accuracy Laser-Based is designed to provide the ultimate in user-friendly operation while delivering calibration-quality accuracy and
More informationSPECIAL APPLICATION MICROMETERS
SPECIAL APPLICATION MICROMETERS RELIABLE, REPEATABLE, AND DURABLE COOLANT PROOF MICROMETERS Rated IP65, for use in harsh shop environments Ratchet stop SPC data output With standard bar (except 0-1 /0-25mm
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Heads fine spindle feed INDEX Micrometers
More informationU. pr. E Calibration group
of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the
More informationSAVER ZONE WINTER FLYER 2014 SUPER BORE GAUGE SET BORE GAUGE ABSOLUTE DIGIMATIC CALIPER. Quality products from a brand you can trust.
WINTER FLYER 2014 Prices in effect from Jan. 2 to Apr. 30, 2014 or as otherwise noted, while quantities last. Some items may not be exactly as shown. Distributed by BORE GAUGE SET BORE GAUGE Gauge stem
More informationDOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
More informationuarter Flyer Prices in effect: October 1 to December 18, 2015 or as otherwise noted while quantities last. Some items may not be exactly as shown.
Distributed by SJ-210 SURFTEST Portable skid system for measuring surface roughness in the production environment. (See page 10). CMTS EDITION CANADIAN MFG. & TECH. SHOW 4 TH uarter Flyer Prices in effect:
More informationDial gauge testing stand M3
Dial gauge testing stand M3 DESCRIPTION probes (like P10 and P50) (P10 calibrated on channel 1 and P50 calibrated on channel 2) Fast fixing by knob-pulley Delivered with inspection software SYCOPRO II
More informationMeasuring microscope MS1
Measuring microscope MS1 Revision No.: 10 Portable measuring microscope with coaxial and angular incident illumination of high quality. The portable microscope MS1 with stable, eloxal coated aluminium
More informationLength, Thailand, NIMT (National Institute of Metrology (Thailand))
Calibration or s Laser raiations Stabilize laser of the mise en pratique: absolute frequency Optical beat frequency 633 633 24 khz 2 95% No 08010- Laser raiations Other stabilize laser: vacuum wavelength
More informationConnecting Mitutoyo Digimatic Devices to the Caliper2PC Interface A step by step Guide
Mitutoyo Digimatic Devices Mitutoyo is one of the world's leading manufacturers of precision measuring equipment, offering a huge range of professional products from micrometers, calipers to dial gauges.
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
More informationGereedskaplyste 2019
Gereedskaplyste 2019 Inhoudsopgawe Diesel- /Trekkerwerktuigkunde... 2 Elektries & Meulmaker... 4 Gereedskapmaker... 6 Pas en Draai... 8 Sweis... 10 1 Diesel- /Trekkerwerktuigkunde ITEM NO TOOLBOX: BESKRYWING
More informationBATHS SHAKERS STIRRERS HOTPLATES MECHANICAL MEASUREMENT HEATING MANTLES MECHANICAL MEASUREMENT
BATHS SHAKERS STIRRERS HOTPLATES MECHANICAL MEASUREMENT HEATING MANTLES MECHANICAL MEASUREMENT Universal Digital Calipers CALIPERS MT-1101060 MT-1101060, Universal Digital Calipers Universal Digital Calipers
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
More informationSTANDARD LEVEL 1 NATOLI.COM PROPER TOOL INSPECTION IS CRUCIAL PROCEDURE
INSPECTION NATOLI.COM LEVEL 1 STANDARD PROPER TOOL INSPECTION IS CRUCIAL Developing consistent tool inspection procedures is a critical part of all comprehensive tool maintenance programs and essential
More informationMW-2012E PRODUCT CATALOGUE 12/13. Partners in Precision INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE
MW-2012E PRODUCT CATALOGUE 12/13 INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE MOORE & WRIGHT A Brief History... Founded in 1906 by innovative young engineer, Frank
More informationCalipers. B-1
alipers www.tesatechnology.com -1 alipers THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation,
More informationMITUTOYO MEASUREMENT SOLUTIONS!
Action valid from 1st June to 30th June 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationLUMBING & PIPELINE TOOLS. The contents of this product catalogue is a brief introduction of our full product range.
P LUMBING & PIPELINE TOOLS 60 The contents of this product catalogue is a brief introduction of our full product range. 61 48297 36620 97065 918-1 141 811A 815A Grooving 1-12 Schedule 10/40 2-1/2-4 1/8-2
More informationCALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
More informationFiducialization Report SRC EPU Advanced Design Consulting
Overview Fiducialiation Report SRC EPU The following is a description of the Fiducialiation process performed at ADC on the SRC EPU. Fiducialiation A Kern E2 theodolite (Figure 1) with a model 190 optical
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationMeasuring microscope MS1
Measuring microscope MS1 Revision No.: 11 Portable measuring microscope with coaxial and angular incident illumination of high quality. The portable microscope MS1 with stable, eloxal coated aluminium
More informationLABMASTER. Pratt & Whitney. Model 1000M UNIVERSAL MEASURING SYSTEM. Measurement Systems, Inc.
Pratt & Whitney Measurement Systems, Inc. The Standard of Accuracy Laser-Based is designed to provide the ultimate in user-friendly operation while delivering calibrationquality accuracy and reproducibility.
More informationGeneral Micro Dissecting Instruments
General Micro Dissecting Instruments 58 Micro Dissecting Needles Micro Dissecting Needle Holders RS-6060 Light weight solid aluminum handle with nickel plated precision chuck. 5 ¼" RS-6061 Light weight
More informationHardness Tester Micro-Vickers Type HM-100
Hardness Tester Micro-Vickers Type HM-100 Hardness tester according to ISO 6507 and JIS B7725. Micro-Vickers hardness tester with Vickers tests from HV 0.01 HV 1. Up to 3 objectives can be connected that
More information