Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF

Transcription

1 Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF

2 Featured Instruments Ratcheting Screwdriver Handle [ ] For manual insertion of Synthes CMF screws Features For use with 1.5 mm, 2.0 mm, 2.4 mm and 3.0 mm screws Ergonomic, one-piece design no disassembly required for cleaning Clearly marked forward and reverse ratchet positions allow easy insertion and removal of screws Locked position allows use as a fixed handle Allows quick connection to all existing Synthes CMF hex coupling instruments 2.0 mm Mandible Locking Plate (MLP) Bender/Cutter [ ] For bending and cutting 2.0 mm plates Features Cuts all 2.0 mm plates Bends 2.0 mm plates in-plane and out-of-plane Duckbill end permits out-of-plane bending of all mandible plates and easily bends the last segment Simple, single-handed use for easy bending Etching on both sides of the instrument illustrates cutting and bending sequence

3 Graphic Cases for Mandible Modular Fixation System 3-High Case [ ] (with one instrument level) 4-High Case, long [ ] (with two instrument levels) 3-High Case High Case Holds 4 insert trays 4 in level 1 OR Holds 3 insert trays 3 in level 1 (when a basic tray is used) Module storage options in lower 2 levels 4 small modules OR 2 large modules OR 1 large and 2 small modules (as configured at left) comes with Graphic Case Case Lid (also sold separately) Two dividers (also sold separately) One insert tray holder (also sold separately) Holds up to 12 insert trays Module storage options in levels 3 and 4 4 small modules OR 2 large modules OR 1 large and 2 small modules (as configured at left) comes with Graphic Case Case Lid Two dividers (also sold separately) Two insert tray holders 4-High Case [ ] (with two instrument levels) Holds 8 insert trays 4 in level 1 4 in level 2 OR Holds 7 insert trays 3 in level 1 (when a basic tray is used) 4 in level 2 Module storage options in levels 3 and 4 4 small modules OR 2 large modules OR 1 large and 2 small modules (as configured at left) 4-High Case, long comes with Graphic Case Case Lid (also sold separately) Two dividers (also sold separately) Two insert tray holders (also sold separately) Note: The 3-High Case does not have a second instrument level. 1

4 Graphic Cases for Mandible Modular Fixation System Instrument Insert Trays 3-High Case Note: All items are sold separately. 4-High Case Standard Insert Tray [ ] (Takes up the space of 4 inserts) Combination Bending/Cutting Pliers [ ] Combination Bending Pliers [ ] Short-Cut Plate Cutter, for 2.4 mm plates [ ] (holds 2) 2.0 mm MLP Bender/Cutter [ ] Combination Bending Pliers, for 2.0 mm/2.4 mm [ ], or 2.7 mm/3.5 mm plates [329.15] Bending Irons (holds 2) Universal Bending Iron [ ] Bending Iron, for 2.4 mm plates [ ] Plate Holding Forceps with ball, for 2.4 mm plates [398.66] (holds 2) Bone Reduction Forceps (holds 2) Large [ ] Small [ ] Small, Straight [ ] Depth Gauge, for 2.0 mm/2.4 mm screws [ ] or [319.53] Plate Holding Forceps [347.98] 2.0 mm/2.4 mm Universal Drill Guide [ ] 4-High Case, long Screwdriver Handles (holds 2) Ratcheting Screwdriver Handle [ ] Large Screwdriver Handle with hex coupling [ ] Note: Unless otherwise noted, tray will hold one of each indicated item. 2

5 Basic Mandible Insert Tray [ ] (Takes up the space of 2 inserts) Screwdriver Handles (holds any 2) Ratcheting Screwdriver Handle [ ] Screwdriver Handle with hex coupling, large [ ] Plate Holding Forceps with ball, for 2.4 mm plates [398.66] (holds 2) Bone Reduction Forceps (holds any 2) Large [ ] Small [ ] Small, Straight [ ] Depth Gauges For 2.0 mm and 2.4 mm screws [ ] For 2.0 mm, 2.4 mm and 3.0 mm screws [319.53] Plate Holding Forceps [347.98] 2.0 mm/2.4 mm Universal Drill Guide [ ] Craniofacial Insert Tray [ ] Mesh Cutter [ ] Plate Cutter [391.98] Screwdriver Handle with hex coupling, small [ ] Screwdriver Blades with hex coupling (each slot holds 2) 1.5 mm Blades 2.0 mm Blades 2.4 mm Blades Plate Holding Tools (holds 2) Plate Holding Instrument, for 1.0 mm and 1.3 mm plates [ ] Plate Holding Instrument, for 1.5 mm and 2.0 mm plates [ ] Screw Holding Forceps, locking, for 1.0 mm and 1.3 mm screws [348.95] Plate Holding Forceps, locking, for 1.0 mm and 1.3 mm plates [348.98] Note: Unless otherwise noted, tray will hold one of each indicated item. 3

6 Instrument Insert Trays (continued) Universal Trocar Insert Tray [ ] Universal Trocar Handle [ ] Malleable C-Retractor [ ] Cheek Retractor Blades (holds 2) 2.0 mm [397.42] 2.4 mm [397.22] Cheek Retractor Rings (holds 2) 2.0 mm [397.43] 2.4 mm [397.23] 2.4 mm Cannula and Obturator [ ] 2.0 mm Cannula and Obturator [ ] Drill Guides (holds 3) 1.5 mm [ ] 1.8 mm DCU Compression [ ] 1.8 mm DCU Neutral [ ] Drill Bits/Taps (each slot will hold 2) Lag Screw Insert Tray [ ] Countersinks with centering pins, for 2.4 mm screws [ ] Drill Bits (each slot holds 2) 1.8 mm Insert Drill Guide [ ] 2.4 mm Drill Guide [ ] Lag Screw Cannula [ ] Lag Screw Pointer [ ] 2.4 mm Titanium Cortex Screws [ E E] (screw rack holds 20) Note: Unless otherwise noted, tray will hold one of each indicated item. 4

7 Ratcheting Screwdriver Insert Tray [ ] Ratcheting Screwdriver Handles (holds 2) Ratcheting Screwdriver Handle, one piece [ ] Screwdriver Body [ ] with Small Handle [ ] or Large Handle [ ] Holding Sleeve [313.97] Screwdriver Blades with hex coupling (2 slots each slot will hold 2) 1.5 mm blades 2.0 mm blades 2.4 mm blades Basic Screwdriver Insert Tray [ ] Screwdriver Handles (holds any 2) Screwdriver Handle with hex coupling, small [ ] Screwdriver Handle with hex coupling, medium [ ] Screwdrivers (fixed handle) (holds any 2) Cruciform [313.96] 1.5 mm/2.0 mm PlusDrive, self-retaining [ ] 2.4 mm cruciform, self-retaining [ ] Holding Sleeve [313.97] Note: Unless otherwise noted, tray will hold one of each indicated item. 5

8 Instrument Insert Trays (continued) IMF Screw Compact Insert Tray [ ] Precut cerclage wire (holds 20) 0.5 mm [ ] 0.6 mm [ ] 1.5 mm Drill Bits, with 12 mm stop (holds 2) 2.4 mm/3.0 mm Cruciform Screwdriver Blade, hex coupling [ ] Holding Sleeve [313.97] 2.0 mm IMF screws, self-drilling 8 mm [ ] (holds 15) 12 mm [ ] (holds 15) Screw Caddy Insert Tray [ ] 2.0 mm screws (holds 36) 2.4 mm/3.0 mm screws (holds 36) Combination Bender/Cutters Insert Tray [ ] 2.0 mm Mandible Locking Plate Bender/Cutter [ ] Combination Bending Pliers, for 2.0 mm and 2.4 mm plates [ ] Bending Pliers, for 2.7 mm and 3.5 mm plates [ ] Note: Recommend storing in top instrument level. Note: Unless otherwise noted, tray will hold one of each indicated item. 6

9 Shortcut Plate Cutters Insert Tray [ ] Shortcut Plate Cutter for 2.4 mm plates [ ] (holds 2) Bending Irons Insert Tray [ ] Bending Irons (holds 2) Universal Bending Iron [ ] Bending Iron for 2.4 mm plates [ ] Combination Bending Pliers Insert Tray [ ] Combination Bending/Cutting Pliers [ ] Combination Bending Pliers [ ] Note: Unless otherwise noted, tray will hold one of each indicated item. 7

10 Instrument Insert Trays (continued) Also Available Auxiliary Insert Tray [ ] This tray is designed to function as an auxiliary bin. It is an empty tray with a mat. Lid, for quarter size insert trays [ ] The lid allows individual insert trays to be stored separately outside of the set, while keeping the items in the tray securely covered. The translucent lid allows contents of the tray to be seen. 8

11 Product Information Mandible Modular Fixation System CASE OPTIONS Graphic Case for Mandible Modular Fixation System, 3-high Graphic Case for Mandible Modular Fixation System, 4-high Graphic Case for Mandible Modular Fixation System, 4-high, long All three cases come with the required insert holder(s), module divider(s) and lids. Also available separately if needed: Insert Holder (for and ) Module Divider, for small module storage Lid, for Mandible Modular Fixation System Graphic Cases (fits and ) INSERT TRAY OPTIONS Basic Mandible Insert Tray Craniofacial Insert Tray Universal Trocar Insert Tray Lag Screw Insert Tray Ratcheting Screwdriver Insert Tray Basic Screwdriver Insert Tray IMF Screw Compact Insert Tray Screw Caddy Insert Tray Combination Bender/Cutters Insert Tray Shortcut Plate Cutters Insert Tray Bending Irons Insert Tray Combination Bending Pliers Insert Tray Auxiliary Insert Tray Lid, for quarter-size insert tray Standard Instrument Tray, full size Sample configurations for insert holder with insert trays: Insert Holder Combination Bender/Cutters Insert Tray Craniofacial Insert Tray Basic Mandible Insert Tray Insert Holder Shortcut Plate Cutters Insert Tray Universal Trocar Insert Tray Basic Mandible Insert Tray Sterilization Parameters for Cases [ , and ] These Synthes cases with all additionally available items, as marked in the case or modules, can be sterilized by the following parameters. For more information, please see graphic case package insert. Method Cycle Temperature Exposure Time Dry Time Steam Gravity C 22 Minutes 25 Minutes Displacement ( F) (Wrapped) Steam Prevacuum C 8 Minutes 20 Minutes (Wrapped) ( F) 9

12 2.0 mm Mandible Locking Plate Module MODULE OPTIONS Module Case, for 2.0 mm Titanium Mandible Locking Plate Set (includes base, lid and standard plate insert tray) Insert Tray, for double angle plates (for ) Insert Tray, for specialty plates (for ) Insert Tray, for compression plates (for ) mm Mandible Locking Plate Module (Small) Screw Part Number Inserts T27 for T35 for T46 for for for for for for Screw Length Markers for 5 mm 18 mm screws W for 5 mm 8 mm self-drilling screws W INSTRUMENTS mm/2.0 mm PlusDrive Screwdriver, self-retaining 1.5 mm/2.0 mm PlusDrive Screwdriver Blades, self-retaining mm, hex coupling mm, hex coupling mm, hex coupling 2.0 mm StarDrive Screwdriver Blades, self-retaining Long, mini quick coupling Long, hex coupling Short, mini quick coupling Short, hex coupling mm Drill Guide, for 2.0 mm Mandible Locking Plates mm Threaded Drill Guide, long, for 2.0 mm Mandible Locking Plates mm Threaded Drill Guide, short, for 2.0 mm Mandible Locking Plates 2.0 mm Titanium Mandible Locking Plate Set Module Case mm Drill Bits, Stryker J-latch mm stop, 85 mm mm mm 2.0 mm Cruciform Screwdriver Blades, with Spring Holding Sleeve Short, hex coupling Long, hex coupling Short, mini quick coupling Long, mini quick coupling Tap for 2.0 mm Mandible Locking Screws, 100 mm Note: Contents ordered separately unless otherwise noted. 10

13 Screws with PlusDrive recess mm Titanium Locking Screws, self-tapping , 6 18 mm (5/pkg.) mm Titanium Cortex Screws, self-tapping , 5, 6, 8 mm (5/pkg.) mm Titanium Cortex Screws, coarse pitch self-tapping, mm (5/pkg.) mm Titanium Cortex Screws, self-drilling , 5, 6, 7 and 8 mm (5/pkg.) mm Titanium Locking Screws, self-drilling , 6, 8 mm (5/pkg.) E 2.4 mm Titanium Emergency Screws E 5, 6, 8 18 mm (1/pkg.) PlusDrive recess StarDrive recess Screws with StarDrive Recess mm Titanium Locking Screws, self-tapping , 6 18 mm (5/pkg.) mm Titanium Cortex Screws, self-tapping , 6 18 mm (5/pkg.) mm Titanium Cortex Screws, coarse pitch self-tapping, 4, 5, 6, 7, 8 24 mm (5/pkg.) mm Titanium Locking Screws, self-drilling , 6, 8 mm (5/pkg.) E 2.4 mm Titanium Emergency Screws E 6, 7, 8 18 mm (1/pkg.) 2.0 mm Mandible Locking Plate Module (Small) Specialty Plates Insert Tray * MANDIBLE LOCKING PLATES (MLP) 2.0 mm Titanium Mini Locking Plates Narrow, 4 holes, malleable Narrow, 6 holes, malleable Narrow, 4 holes Narrow, 6 holes Adaption, 12 holes* Adaption, 20 holes Tension Band, 4 holes Broad, 4 holes Broad, curved, 4 holes Pre-bent Tension Band, 4 holes, right* Pre-bent Tension Band, 4 holes, left* Double Wide, 12 holes, malleable* Double Wide, 9 holes, malleable* Box, malleable* Strut, 8 holes, malleable* Curved Strut, 8 holes, malleable* Double Y-Plate, malleable* L-Plate, right, malleable* L-Plate, left, malleable* Compression Plates Insert Tray * 2.0 mm Titanium Intermediate Locking Plates holes holes Compression, 4 holes* Compression, 5 holes* Compression, 6 holes* Compression, 8 holes* Angle Compression, 6 holes* Angle Compression, 8 holes* Crescent, 5 holes* Crescent, 7 holes* Note: Contents ordered separately unless otherwise noted. * Large Module only 11

14 2.0 mm Mandible Locking Plate Module (continued) MANDIBLE LOCKING PLATES (MLP) (cont d) 2.0 mm Titanium Large Locking Plates x 3 holes holes holes holes x 21 holes, right x 21 holes, left Crescent, 3 x 3 holes Angled, 3 x 3 holes Angled, 4 x 4 holes Double Angle, 4 x 20 x 4 holes* Double Angle, 5 x 22 x 5 holes* Double Angle, 6 x 24 x 6 holes* Specialty Plates Insert Tray * 2.0 mm Titanium Extra Locking Plates holes* holes* x 21 holes, right* x 21 holes, left* Double Angle, 4 x 20 x 4 holes* Double Angle, 5 x 22 x 5 holes* Double Angle, 6 x 24 x 6 holes* TEMPLATES For 2.0 mm Titanium Mini Locking Plates Adaption, 20 holes holes For 2.0 mm Titanium Intermediate Locking Plates holes holes Crescent, 5 and 7 holes Angle Compression, 6 and 8 holes Compression, 4, 6 and 8 holes For 2.0 mm Titanium Large and Extra Locking Plates x 21 holes, right Angled, 4 x 4 holes Crescent, 3 x 3 holes holes x 3 holes x 21 holes, left Double Angle, 4 x 20 x 4 holes Double Angle, 5 x 22 x 5 holes Double Angle, 6 x 24 x 6 holes Note: Contents ordered separately unless otherwise noted. * Large Module only 12

15 2.4 mm/3.0 mm Locking Reconstruction and Trauma Module MODULE OPTIONS Module Case for 2.4 mm/3.0 mm Locking Reconstruction and Trauma plates (includes base, lid and standard LRP plate insert tray) mm Mandible Trauma Plates Insert Tray (for ) mm Microvascular Plates Insert Tray (for ) Screw Part Number Inserts (included with ) for for for for Screw Length Markers for 6 mm 18 mm screws INSTRUMENTS mm Drill Bit, Stryker J-latch, 100 mm mm Drill Bit, Stryker J-latch, 125 mm mm Threaded Drill Guide, short, for Locking Reconstruction Plate mm Threaded Drill Guide, for Locking Reconstruction Plate mm Drill Bit, Stryker J-latch, 125 mm mm Threaded Drill Guide, short, for Locking Reconstruction Plate mm Threaded Drill Guide, for Locking Reconstruction Plate Titanium Bending Insert Screw, for Locking Reconstruction Plate TEMPLATES For Locking Reconstruction Plate x 20 x 4 holes, double-angled x 22 x 5 holes, double-angled x 24 x 6 holes, double-angled x 23 holes, angled holes, straight For Universal Fracture Plates (449.38, ) For Microvascular Plates x 20 x 4 holes x 22 x 5 holes x 24 x 6 holes SCREWS mm Titanium Cortex Screws, self-tapping, 6 mm 40 mm (5/pkg.) mm Titanium Emergency Screws, 8 18 mm (5/pkg.) mm Titanium Locking Screws, for Titanium Locking Reconstruction Plate, 8 mm 24 mm (5/pkg.) mm Titanium Locking Screws, for Titanium Locking Reconstruction Plate, 8 mm 24 mm (5/pkg.) 2.4 mm/3.0 mm Locking Reconstruction and Trauma Plate Module Case PLATES Titanium Locking Reconstruction Plates holes, straight holes, straight x 23 holes, left, angled x 23 holes, right, angled x 20 x 4 holes, double angled x 22 x 5 holes, double angled x 24 x 6 holes, double angled x 3 holes, crescent shape x 3 holes x 4 holes, angled x 8 holes, left angled x 8 holes, right angled Titanium Locking Reconstruction Plates, with Condylar Head x 16 holes, right x 16 holes, left x 18 holes, right x 18 holes, left x 20 holes, right x 20 holes, left Note: Contents ordered separately unless otherwise noted. 13

16 2.4/3.0 mm Locking Reconstruction and Trauma Module (continued) 2.4 mm Mandible Trauma Plates, optional insert tray [ ] accommodates: 2.4 mm Titanium Compression Tension Band Plates holes holes 2.4 mm Titanium LC-DCP Plates holes holes holes Crescent, 4 holes Crescent, 6 holes 2.4 Mandible Trauma Plates, optional insert tray for mm Titanium Universal Fracture Plates Straight, 8 holes Straight, 10 holes with angle, 3 x 3 holes with angle, 4 x 4 holes ALSO AVAILABLE 2.4 mm Titanium Eccentric LC-DCP Plates holes holes 2.4 mm Titanium Microvascular Plates, Insert Tray [ ] accommodates: Straight, 12 holes Straight, 20 holes with angle, 6 x 18 holes, right with angle, 6 x 18 holes, left with double angle, 4 x 20 x 4 holes with double angle, 5 x 22 x 5 holes with double angle, 6 x 24 x 6 holes 2.4 Microvascular Plates, optional insert tray for ALSO AVAILABLE 2.4 mm Titanium Microvascular Plates, straight holes holes holes holes holes 2.4 mm Titanium Microvascular Plates, with angle x 8 holes, right x 8 holes, left x 16 holes, right x 16 holes, left x 17 holes, right x 17 holes, left x 21 holes, right x 21 holes, left Note: Contents ordered separately unless otherwise noted. 14

17 OTHER MODULE OPTIONS Locking Reconstruction Plate Module (small) and Screw Length Marker Kit mm Mandible Trauma Module (small) and Screw Length Marker Kit mm Microvascular Module (small) and Screw Length Marker Kit

18 IMF Screw Set [ ] MODULE IMF Screw Module IMPLANTS mm IMF Screw, self-drilling, 8 mm, 6 pkgs. of mm IMF Screw, self-drilling, 12 mm, 6 pkgs. of mm (24 gauge) Precut Cerclage Wire, 175 mm, 2 pkgs. of mm (22 gauge) Precut Cerclage Wire, 175 mm, 2 pkgs. of 10 INSTRUMENTS mm/3.0 mm Cruciform Screwdriver Blade with hex coupling mm Screwdriver with Holding Sleeve mm Drill Bit, Stryker J-latch, with 12 mm stop, 2 ea Wire Twister Wire-Cutting Scissors ALSO AVAILABLE 1.5 mm Drill Bits, with 12 mm stop Mini quick coupling Hex coupling IMF Screws and Auto Wire Twister Wire Cutting Scissors, universal Wire Manipulator IMF Screw Compact Tray (accommodates up to 30 screws, 20 of one wire size, and two 1.5 mm Drill Bits with stop) 2.4 mm/3.0 mm Cruciform Screwdriver Blade, with hex coupling (shown with Holding Sleeve ) Wire-Cutting Scissors, straight pointed Wire Twister mm Screwdriver with Holding Sleeve (consists of and ) 16

19 SYNTHES CMF 1302 Wrights Lane East West Chester, PA Telephone: (610) To order: (800) Fax: (610) SYNTHES (CANADA) LTD Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) To order: (800) Fax: (905) SYNTHES CMF 2004 LC-DCP, PlusDrive, SYNTHES and ASIF are trademarks of SYNTHES (USA) and SYNTHES AG Chur. Printed in U.S.A. 8/05 J5483-B