BELLY CRUZER DSLR Steady Camera Rig (FC-BC-DSR)

Transcription

1 BELLY CRUZER DSLR Steady Camera Rig (FC-BC-DSR) Setup and Operational Manual All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

2 FILMCITY BELLY CRUZER DSLR STEADY CAMERA RIG 2 I N T R O D U C T I O N Keeping pace with the advancements in today's DSLR and Camcorder technology, Amazingly advanced and totally re-engineered BELLY CRUZER DSLR STEADY CAMERA RIG from FILMCITY represents lightweight and state-of-art Rig. A lightweight, modular solution that is designed to be mobile and flexible so you can capture your footage smoothly, the way you want it to be seen. I N T H E B O X Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below. Base Plate Top Handle MB-600 Matte Box Top Plate Belly Support Handle Set 5x 300mm female rods Shoulder Pad Battery Mounting Plate 2x 300mm male rods 4x 250mm female rods Front Handle Bracket Handle Bracket AD-15 Adapter Accessories

3 FILMCITY BELLY CRUZER DSLR STEADY CAMERA RIG 3 A S S E M B LIN G YO U R M B M AT T E BOX Insert the French flag in to the Matte Box and tighten the screws. Using the same approach, insert the side flags into the (big) slots provided in the hinges and secure with the screws. Note: If the French flag (top) remains loose even after tightening the knob you have to slightly tighten the allen bolt as shown in the image. Insert the filter holders to your matte box as shown below. Note: For better gripping of filter in filter holder, retighten the filter tray knob to secure the filter properly.

4 FILMCITY BELLY CRUZER DSLR STEADY CAMERA RIG 4 Attach knicker on conversion ring, then screw in the conversion ring on ring holder. Attach Base Plate to your tripod plate and tighten it with help of screw driver. Now attach set-up to your tripod stand and tighten with provided knob to ensure slip free connection. Remove quick release plate from base plate by loosening provided knob and pushing button. Attach quick release plate to camera base and secure with screw driver. Now mount your camera set-up onto tripod and secure with provided knobs.

5 FILMCITY BELLY CRUZER DSLR STEADY CAMERA RIG 5 Attach quick release plate to camera base and secure with screw driver. Now mount your camera set-up onto tripod and secure with provided knobs. Insert 4x 250mm female rods onto base plate and tighten knobs to secure. Now attach top plate onto the rods and tighten with provided knobs. Insert 2x 300mm female rods to back of base plate, then attach belly support to it and tighten properly.

6 FILMCITY BELLY CRUZER DSLR STEADY CAMERA RIG 6 Now loosen the allen bolts on top plate and insert 2x 300mm male rods to it. Now insert top handle to the back of 300mm rails, loosen the knob in order to attach2x 300mm male rods to female rods as shown below. Insert Shoulder Pad to back of rails and tighten via allen key, then insert battery mounting plate to it and secure with provided knobs.

7 FILMCITY BELLY CRUZER DSLR STEADY CAMERA RIG 7 Attach rod adapter to front of top rails and secure. Now loosen the knob in order to insert 300mm female rod to it. Now attach side handles to both ends of 300mm rail as shown below. Now attach MB-600 matte box to front of rail system, tighten via allen key.

8 FILMCITY BELLY CRUZER DSLR STEADY CAMERA RIG 8 Adjust knicker to camera lens and tighten the knot properly. YO U R F I L M C I T Y B E L LY C R U Z E R D S L R S T E A DY C A M E R A R I G A L L D R E S S E D U P A N D G O O D TO G O (SHOWN WITH OPTIONAL ACCESSORIES)

9 FILMCITY BELLY CRUZER DSLR STEADY CAMERA RIG 9 WARRANTY We offer a limited time warranty for our products. For Mechanical products we provide a 6 month warranty & for electronic products we provide a 3 month warranty from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us. If any VAT or import duties are applied to the return, we will also charge these costs to the customer. The warranty does not include, by the way of example, damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. We are not liable for incidental or consequential damages resulting from the use of the unit or occurring due to any breach of this warranty. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired. We will cover the complete cost of sending replacement parts within the warranty period. After that, Nominal cost of the product & Actual shipping cost will be charged. Do not send the unit to us without first getting a response and getting the approval to send back the item. In case of any kind of dissatisfaction, we urge you to Contact us immediately and we shall do our best to help you out. For any other assistance you can reach us via .