24846 Avenue Rockefeller Suite 200 Valencia, CA Issue: SPC Tel: Fax: Web:

Transcription

1 CE BCKSTGE CO., INC. STGE POCKET SYSTEMS P NE LF B ION ST GE P ET S Y S S M E T T C RI OC K venue Rockefeller Suite 200 Valencia, C Issue: SPC Tel: Fax: Web: RI C N B G CF SPE EM EN T CONNECTIVITY TIO N M GE ST CONNECTRIX SYSTEM Stage Pocket Systems /// Panel Fabrication /// Spec Fabrication /// Stage Management /// Connectivity

2 BC CTLOG & MODEL NUMBER INDEX Company: ce Backstage Co., Inc. ddress: venue Rockefeller, Suite 200 Valencia, C Telephone: Fax: orders@acebackstage.com Web Site: This publication (Issue: SPC) is produced by ce Backstage Co., Inc. and no responsibility for errors and omissions is assumed. ll rights reserved ce Backstage Co., Inc. Subject to change without notice. CE BCKSTGE CO., INC. S CTLOG INDEX DESCRIPTION PGE # DESCRIPTION PGE # /C Electric Isolation Kit Back ccess Covers Back Boxes Back Boxes, Polyurethane Encapsulated Connectors, Connectrix & Stock Choir Stick Microphones Connectrix System & Panels Custom Panel Materials Custom Spec Panel/Pocket Fabrication & Engraving Double Wide Pocket Electrical Pocket Panels Full Pocket Half Pocket Microphone Hanger Slug...34 Microphone Softpod...34 Mini Pocket Mini Pocket Panels...5 Panel Connector Loading & Engraving Panel Materials and Specifications... 18, Pocket & Panel Selection Guide...3 Rack Mount Kits...35 Rack Panels...25 Super Pocket Super Double Wide Pocket Switchcraft Panels...23 Wall Panels...26 Model # Description Page # Model # Description Page # Model # Description Page # MINI POCKET LUMINUM PNELS - STOCK (CONNECTRIX) #MP luminum Panel - Blank, 2-9/16 X 2-7/ #MP luminum Panel - Machined 1 Connectrix Cutout #MP luminum Panel - Machined 2 Connectrix Cutouts #MP luminum Panel - Machined 1 Connectrix & 1 S-Video Cutout #MP luminum Panel - Machined 1 Connectrix & 1 ICC Cutout #MP luminum Panel - Machined 2 Neutrik Cutouts #MP luminum Panel - Machined 1 Neutrik & 1 ICC Cutout #MP luminum Panel - Machined 1 Neutrik & 1.38 Cutout #MP luminum Panel - Machined 1 Neutrik Cutout, Centered #MP luminum Panel - Machined 1 ICC & 1 15-Pin Cutout, Centered #MP luminum Panel - Machined 1 ICC Cutout, Centered #MP luminum Panel - Machined 1 ICC Cutout, Left or Right #MP luminum Panel - Machined 1 Inline #DV101CM Cutout #MP luminum Panel - Machined 1.C. Cutout, Centered #MP luminum Panel - Machined 1.C. Cutout, Left or Right #MP luminum Panel - Machined 1 VG Cutout, Centered STGE POCKET LUMINUM PNELS - STOCK (CONNECTRIX) #PNL luminum Panel - Blank, 4-1/2 X 3-11/ #PNL luminum Panel - Machined 2 Connectrix Cutouts #PNL luminum Panel - Machined 3 Connectrix Cutouts #PNL luminum Panel - Machined 4 Connectrix Cutouts #PNL luminum Panel - Machined 5 Connectrix Cutouts #PNL luminum Panel - Machined 6 Connectrix Cutouts #PNL luminum Panel - Blank, 4-1/2 X 7-3/ #PNL luminum Panel - Machined 4 Connectrix Cutouts #PNL luminum Panel - Machined 6 Connectrix Cutouts #PNL luminum Panel - Machined 8 Connectrix Cutouts #PNL luminum Panel - Machined 10 Connectrix Cutouts #PNL luminum Panel - Machined 12 Connectrix Cutouts #PNL luminum Panel - Blank, 9-1/32 X 7-3/ #PNL luminum Panel - Machined 25 Connectrix Cutouts RCK LUMINUM PNELS, BLCK - STOCK (CONNECTRIX) #RPL luminum Panel - Single Space Rack Panel Blank, 19 X 1-3/ #RPL luminum Panel - Single Space Rack Panel Machined 10 Connectrix Cutouts #RPL luminum Panel - Two Space Rack Panel Blank, 19 X 3-1/ #RPL luminum Panel - Two Space Rack Panel Machined 30 Connectrix Cutouts #RPL luminum Panel - Three Space Rack Panel Blank, 19 X 5-1/ #RPL luminum Panel - Three Space Rack Panel Machined 45 Connectrix Cutouts WLL LUMINUM PNELS, BLCK - STOCK (CONNECTRIX) #WP luminum Panel - Single Gang Wall Panel Blank, 4-1/2 X 2-3/ #WP luminum Panel - Double Gang Wall Panel Blank, 4-9/16 X 4-1/ #WP luminum Panel - Triple Gang Wall Panel Blank, 6-3/8 X 4-1/ #WP luminum Panel - Four Gang Wall Panel Blank, 8-3/16 X 4-1/ #WP luminum Panel - Six Gang Wall Panel Blank, 11-13/16 X 4-1/ #WP luminum Panel - Single Gang Wall Panel Machined 1 Connectrix Cutout #WP luminum Panel - Single Gang Wall Panel Machined 2 Connectrix Cutouts #WP luminum Panel - Double Gang Wall Panel Machined 4 Connectrix Cutouts #WP luminum Panel - Double Gang Wall Panel Machined 6 Connectrix Cutouts #WP luminum Panel - Triple Gang Wall Panel Machined 6 Connectrix Cutouts #WP luminum Panel - Triple Gang Wall Panel Machined 8 Connectrix Cutouts #WP luminum Panel - Four Gang Wall Panel Machined 8 Connectrix Cutouts #WP luminum Panel - Four Gang Wall Panel Machined 12 Connectrix Cutouts #WP luminum Panel - Six Gang Wall Panel Machined 12 Connectrix Cutouts #WP luminum Panel - Six Gang Wall Panel Machined 16 Connectrix Cutouts WLL LUMINUM PNELS, WHITE - STOCK (CONNECTRIX) #WP luminum Panel - Single Gang Wall Panel Blank, 4-1/2 X 2-3/ #WP luminum Panel - Double Gang Wall Panel Blank, 4-9/16 X 4-1/ #WP luminum Panel - Triple Gang Wall Panel Blank, 6-3/8 X 4-1/ #WP luminum Panel - Four Gang Wall Panel Blank, 8-3/16 X 4-1/ #WP luminum Panel - Six Gang Wall Panel Blank, 11-13/16 X 4-1/ #WP luminum Panel - Single Gang Wall Panel Machined 1 Connectrix Cutout #WP luminum Panel - Single Gang Wall Panel Machined 2 Connectrix Cutouts #WP luminum Panel - Double Gang Wall Panel Machined 4 Connectrix Cutouts #WP luminum Panel - Double Gang Wall Panel Machined 6 Connectrix Cutouts #WP luminum Panel - Triple Gang Wall Panel Machined 6 Connectrix Cutouts #WP luminum Panel - Triple Gang Wall Panel Machined 8 Connectrix Cutouts #WP luminum Panel - Four Gang Wall Panel Machined 8 Connectrix Cutouts #WP luminum Panel - Four Gang Wall Panel Machined 12 Connectrix Cutouts #WP luminum Panel - Six Gang Wall Panel Machined 12 Connectrix Cutouts #WP luminum Panel - Six Gang Wall Panel Machined 16 Connectrix Cutouts LUMINUM PNELS - STOCK (SWITCHCRFT) #PSW luminum Panel - Machined 2 Switchcraft Cutouts #PSW luminum Panel - Machined 3 Switchcraft Cutouts #PSW luminum Panel - Machined 4 Switchcraft Cutouts #PSW luminum Panel - Machined 5 Switchcraft Cutouts #PSW luminum Panel - Machined 6 Switchcraft Cutouts ELECTRIC PNELS - STEEL #/C ISO KIT...C. Electric Isolation Kit #PE...Single Gang Electric Duplex Switch Box w/ Steel Mounting Panel #FP3E...Triple Gang Electric Duplex Switch Box w/ Steel Mounting Panel STGE POCKET CCESSORIES #BRK102BBX...Super Pocket Back Box & Bracket Kit #BRK104BBX...Super Double Wide Back Box & Bracket Kit #DB...Steel Duplex Cover Panel, Punched For Narrow Single Gang #DC...Steel Duplex Cover Panel, Solid For Narrow Single Gang #102BBX...Full Pocket Back Box #102BBXW...Full Pocket Back Box, Polyurethane Encapsulated #102DDBBX...Double Deep Full Pocket Back Box 10 x 10 x #103BBX...Half Pocket Back Box #103BBXW...Half Pocket Back Box, Polyurethane Encapsulated #104BBX...Double Wide Pocket Back Box #104BBXW...Double Wide Pocket Back Box, Polyurethane Encapsulated #104DDBBX...Double Deep Full Pocket Back Box 10 x 18 x #22BC...Full Pocket Back ccess Cover #23BC...Half Pocket Back ccess Cover #24BC...Double Wide Pocket Back ccess Cover #025BBX...Mini Pocket Back Box... 4 #025BBXC...Mini Pocket Back Box w/.c. Divider... 4 #SO Super Back Box 10 x 10 x , 17 #SO-200W...Super Back Box 10 x 10 x 8, Polyurethane Encapsulated #SO Super Double Wide Back Box 10 x 18 x , 17 #SO-201W...Super Double Wide Back Box 10 x 18 x 8, Polyurethane Encapsulated #WB-8x8x4...Wall Box 8 x 8 x #WB-10x10x4...Wall Box 10 x 10 x #WB-12x12x4...Wall Box 12 x 12 x MINI STGE POCKETS - Vertical Slant Panel #025BK...Mini Pocket w/ Black Powder Coat Finish #025BR...Mini Pocket w/ Brushed Brass Finish #025CV...Mini Pocket w/ Copper Vein Powder Coat Finish #024SV...Mini Pocket w/ Silver Vein Powder Coat Finish HLF STGE POCKETS - Vertical Slant Panel #123CLBK...Half Pocket w/ Black Powder Coat Finish & Carpet Lid #123CLCV...Half Pocket w/ Copper Vein Powder Coat Finish & Carpet Lid #123CLSV...Half Pocket w/ Silver Vein Powder Coat Finish & Carpet Lid #123LLBK...Half Pocket w/ Black Powder Coat Finish & Locking Lid ssembly #123SLBK...Half Pocket w/ Black Powder Coat Finish & Standard Lid #123SLCV...Half Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #123SLSV...Half Pocket w/ Silver Vein Powder Coat Finish & Standard Lid #223CLBR...Half Pocket w/ Brushed Brass Finish & Carpet Lid #223SLBR...Half Pocket w/ Brushed Brass Finish & Brass Lid #323CLSS...Half Pocket w/ Stainless Steel Finish & Carpet Lid #323SLSS...Half Pocket w/ Stainless Steel Finish & Stainless Steel Lid FULL STGE POCKETS - Vertical Slant Panel #122CLBK...Full Pocket w/ Black Powder Coat Finish & Carpet Lid #122CLCV...Full Pocket w/ Copper Vein Powder Coat Finish & Carpet Lid #122CLSV...Full Pocket w/ Silver Vein Powder Coat Finish & Carpet Lid #122LLBK...Full Pocket w/ Black Powder Coat Finish & Locking Lid ssembly #122SLBK...Full Pocket w/ Black Powder Coat Finish & Standard Lid #122SLCV...Full Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #122SLSV...Full Pocket w/ Silver Vein Powder Coat Finish & Standard Lid #222CLBR...Full Pocket w/ Brushed Brass Finish & Carpet Lid #222SLBR...Full Pocket w/ Brushed Brass Finish & Brass Lid #322CLSS...Full Pocket w/ Stainless Steel Finish & Carpet Lid #322SLSS...Full Pocket w/ Stainless Steel Finish & Stainless Steel Lid DOUBLE WIDE STGE POCKETS - Vertical Slant Panel #124CLBK...Double Wide Pocket w/ Black Powder Coat Finish & Carpet Lid #124CLCV...Double Wide Pocket w/ Copper Vein Powder Coat Finish & Carpet Lid #124CLSV...Double Wide Pocket w/ Silver Vein Powder Coat Finish & Carpet Lid #124LLBK...Double Wide Pocket w/ Black Powder Coat Finish & Locking Lid ssembly #124SLBK...Double Wide Pocket w/ Black Powder Coat Finish & Standard Lid #124SLCV...Double Wide Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #124SLSV...Double Wide Pocket w/ Silver Vein Powder Coat Finish & Standard Lid #224CLBR...Double Wide Pocket w/ Brushed Brass Finish & Carpet Lid #224SLBR...Double Wide Pocket w/ Brushed Brass Finish & Brass Lid #324CLSS...Double Wide Pocket w/ Stainless Steel Finish & Carpet Lid #324SLSS...Double Wide Pocket w/ Stainless Steel Finish & Stainless Steel Lid SUPER STGE POCKETS - Horizontal Panel #132CLBK...Super Pocket w/ Black Powder Coat Trim Bezel & Carpet Lid #132CLCV...Super Pocket w/ Copper Vein Powder Coat Trim Bezel & Carpet Lid #132CLSV...Super Pocket w/ Silver Vein Powder Coat Trim Bezel & Carpet Lid #132LLBK...Super Pocket w/ Black Powder Coat Finish & Locking Lid ssembly #132SLBK...Super Pocket w/ Black Powder Coat Trim Bezel & Standard Lid #132SLCV...Super Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #132SLSV...Super Pocket w/ Silver Vein Powder Coat Finish & Standard Lid #232CLBR...Super Pocket w/ Brushed Brass Trim Bezel & Carpet Lid #232SLBR...Super Pocket w/ Brushed Brass Trim Bezel & Brass Lid #332CLSS...Super Pocket w/ Stainless Steel Trim Bezel & Carpet Lid #332SLSS...Super Pocket w/ Stainless Steel Trim Bezel & Stainless Steel Lid SUPER DOUBLE WIDE STGE POCKETS - Horizontal Panel #134CLBK...Super Double Wide Pocket w/ Black Powder Coat Trim Bezel & Carpet Lid #134CLCV...Super Double Wide Pocket w/ Copper Vein Powder Coat Trim Bezel & Carpet Lid #134CLSV...Super Double Wide Pocket w/ Silver Vein Powder Coat Trim Bezel & Carpet Lid #134LLBK...Super Double Wide Pocket w/ Black Powder Coat Finish & Locking Lid ssembly #134SLBK...Super Double Wide Pocket w/ Black Powder Coat Trim Bezel & Standard Lid #134SLCV...Super Double Wide Pocket w/ Copper Vein Powder Coat Finish & Standard Lid #134SLSV...Super Double Wide Pocket w/ Silver Vein Powder Coat Finish & Standard Lid #234CLBR...Super Double Wide Pocket w/ Brushed Brass Trim Bezel & Carpet Lid #234SLBR...Super Double Wide Pocket w/ Brushed Brass Trim Bezel & Brass Lid #334CLSS...Super Double Wide Pocket w/ Stainless Steel Trim Bezel & Carpet Lid #334SLSS...Super Double Wide Pocket w/ Stainless Steel Trim Bezel & Stainless Steel Lid

3 BC POCKET & PNEL SELECTION GUIDE VERTICL SLNT PNEL POCKETS (Pages 4-11) Connectrix Connectrix Cutout See Pages for details Lid Choices STNDRD GENERL USE VERTICL SLNT PNEL POCKETS feature welded heavy steel construction, choice of 3 decorator oven cured powder coat finishes (inside and outside), plus solid brass or stainless steel bezel, 2 lid choices, and a host of standard and custom V and/or electric panels. See pages for panel and connector details. Mini Pocket Half Pocket Full Pocket Double Wide Pocket Standard Flush Hinged Lid PGES 4-5 PGES 6-7 PGES 8-9 PGES Recessed Carpet Flush Hinged Lid UL Listed UL Listed compliance Standard Capacity: Up to (4) Connectrix Connectors on (2) Mini Panels. Capacity: Up to (6) Connectrix Connectors or (1) Duplex Electric Outlet Panel. Capacity: Up to (12) Connectrix Connectors or (6) Connectrix Connectors and (1) Duplex Electric Outlet Panel. Capacity: Up to (24) Connectrix Connectors or multiple audio, communications, data, electric, sub-d, video, and voice connection Panels. HORIZONTL PNEL POCKETS (Pages 12-15) Connectrix Connectrix Cutout See Pages for details Lid Choices Standard Flush Hinged Lid Recessed Carpet Flush Hinged Lid SUPER CPCITY HORIZONTL PNEL POCKETS o ffer the same rugged welded steel construction and finishes with a detachable trim bezel, horizontal panel mounting brackets with included back boxes. Super Pockets provide more than twice the capacity of our vertical pockets in the same space. *Note: Connector capacity limitations apply depending on connectors and panels used. Super Pocket PGES Capacity: Up to (24) Connectrix Connectors Plus (2) Duplex Electric Outlet Panels in isolated raceway*. UL Listed Super Double Wide Pocket PGES Capacity: Up to (48) Connectrix Connectors or multiple audio, communications, data, electric, sub-d, video, and voice connection Panels. UL Listed when used with BC specified parts STOCK PNELS ND PNEL CONFIGURTIONS (Pages 18-24) STNDRD GENERL USE PRE-CUT STOCK PNELS are constructed of tough 1/16 (.062 thick) aircraft alloy aluminum. ll aluminum panels are CNC rotary machined to precisely mate with the designated connectors and in the specified pocket. Panels are oven cured semi-gloss black powder coat and most provide header space for custom engraving. See pages for panel and connector details. See panel types below for configurations. Standard Pocket Panels and Configurations Mini Pocket Panel Double Wide Pocket Panel Configurations Half Pocket Panel B Super and Super Double Wide Pocket Panels and Configurations Super Pocket Panel Configurations Super Double Wide Pocket Panel Configurations C Check Out for more Panel Configurations Full Pocket Panel Configurations C B D B B 3

4 MINI STGE POCKET The MINI STGE POCKET (#025) is a compact rugged, high utility, high density design. The lid/bezel is 1/8 steel with a footprint of 4-3/4 x 7. The hinge is brushed brass or stainless steel and will not rust or discolor. The lid and bezel assembly is available in 3 oven-cured powder coat finishes plus brushed brass. The lid/bezel mounts to the pocket body which easily installs in raised floors with or without a back box. Two panel positions in the pocket body permit a wide array of connection possibilities. While the space in the pocket is compact, a careful selection of connectors can satisfy requirements for audio, video, computer or 110VC connectivity. MINI POCKET #025BK INCLUDES: () 1 - Mini Pocket Body (B) 1 - Mini Pocket Trim/Bezel Lid ssembly (C) 4 - Machine Screws (for mounting with Back Box) (D) 8 - Self Tapping Sheet Metal/Wood Screws OPTIONL CCESSORIES: (E) 1 - #025BBX Mini Pocket Back Box (F) 1 - #025BBX/C Mini Pocket Back Box w/.c. Divider (G) 2 - #MP-xxx Mini Pocket Panels EXPLODED VIEW OF MINI POCKET #025BK Mini Pocket Model Numbers #025BK...Mini Pocket w/ Black Powder Coat Finish #025BR...Mini Pocket w/ Brushed Brass Finish #025CV...Mini Pocket w/ Copper Vein Powder Coat Finish #025BBX...Mini Pocket Back Box #025BBXC...Mini Pocket Back Box w/.c. Divider HIGH UTILITY - HIGH DENSITY The small footprint and compact size sets limits for the combination of connectors that may be used in a single pocket. Using the connectrix system in various 2-panel combinations for large and small connectors a surprising array of connections can be accomplished. single MINI POCKET may accommodate only one or two larger connectors (mic, speaker, VG,.C. etc.). When using smaller connectors four or more connections are possible. When selected large and small connectors are stategically placed in the opposing panels, 3-4 connectivity terminations can easily be accomplished. ESY INSTLLTION n installation template is provided to assure the correct cutout and screw locations in raised wood/ carpet floors. ll hardware to install the pocket, lid/bezel and panels is included. G D C G B INSTLLED MINI POCKET Mini Pocket shown installed in carpeted floor with 110VC receptacle using #025BBX/C Divided Back Box which provides isolation for low and high voltage terminations. CUSTOM PNELS Many pre-cut stock connector panels are available. The panels clip in with two self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket recess. Made of tough aircraft alloy aluminum, 1/16 thick, and finished with oven cured semigloss black powder coat. Most panels provide header space for custom engraving. CONNECTRIX MINI POCKET PNELS variety of Mini Pocket Connectrix panels are available. See page 5 for details. E Mini Pocket #025BBX Back Box (E) and #025BBX/C Back Box with 110 VC divider (F). F 4

5 MINI STGE POCKET SPECIFICTIONS MINI POCKET SPECIFICTIONS, INSTLLTION ND CUT- OUT TEMPLTE FOR RISED FLOOR MINI STGE POCKET TRIM BEZEL LID HINGE END HEVY DUTY STINLESS STEEL HINGE ND RIVETS 4.750" 2.880" 5.505" 3/8" x 1-1/4" CBLE EXIT SLOTS 2.750" CUTOUT RE 5.350" 7.000" DRILL 3/32" PILOT HOLES (8) PLCES INSTLLTION ND CUTOUT TEMPLTE FOR RISED FLOOR MX LID OPENING 135º TRIM BEZEL LID SSEMBLY 11 G CRS (.120" THICK) NRROW CLERNCE FOR SMLLER CONNECTORS CONNECTOR PNELS 2.062" WIDER CLERNCE FOR LRGER CONNECTORS 2.245" OPTIONL #025BBX BCK BOX " MINI STGE POCKET BODY 16 G CRS (.062" THICK) ll Dimensions are for reference only 5.560" 3.750" MP-100 Mini Pocket Panel Specifications 2.00".25".25" 2.00".203" DI. (2 PLCES) MINI POCKET CONNECTRIX LUMINUM PNELS ce s Mini Pocket luminum Panels are pre-cut stock connector panels. The panels clip in the Mini Pocket body with two self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket recess. Made of tough aircraft alloy aluminum, 1/16 thick, and finished with oven cured semi-gloss black powder coat. Most panels provide header space for custom engraving. 1.25".775".950" 2.50".062" RD. TYPICL Mini Pocket Panel Model Numbers MODEL # DESCRIPTION #MP Mini Panel, Blank #MP Mini Panel, 1 Connectrix Mounts #MP Mini Panel, 2 Connectrix Mounts #MP Mini Panel, 1 Connectrix & 1 S-Video Mount #MP Mini Panel, 1 Connectrix & 1 ICC Mount #MP Mini Panel, 2 Neutrik Mounts #MP Mini Panel, 1 Neutrik & 1 ICC Mount #MP Mini Panel, 1 Neutrik & 1.38 Mount #MP Mini Panel, 1 Neutrik Mount, Centered #MP Mini Panel, 1 ICC & 1 HD 15-Pin Mount, Centered #MP Mini Panel, 1 ICC Mount, Centered #MP Mini Panel, 1 ICC Mount, Left or Right #MP Mini Panel, 1 Inline #DV101CM Mount #MP Mini Panel, 1 /C Mount, Centered #MP Mini Panel, 1 /C Mount, Left or Right #MP Mini Panel, 1 VG Mount, Centered single MINI POCKET can accomodate various 2-panel combinations for large and small connectors accomplishing a surprising array of connections. The Mini Pocket Panels may accommodate only one or two larger connectors (mic, speaker, VG,.C. etc.) or when using smaller connectors four or more connections are possible. When selected large and small connectors are stategically placed in the opposing panels, 3-4 connectivity terminations can easily be accomplished. MINI POCKET CONNECTRIX LUMINUM PNELS #MP-100 #MP-101 #MP-102 #MP-103 #MP-104 #MP-105* #MP-106* #MP-107* #MP-108* #MP-109 #MP-110 #MP-111 #MP-112 #MP-113 #MP-114 #MP-115 *Note: These panels are machined for Neutrik connectors. Call for Switchcraft Mini Pocket Panel Model Numbers. 5

6 HLF STGE POCKET Heavy duty steel flush stage pocket conceals audio, video, data, communications, C power, switches etc. below the floor surface for easy access and to prevent connector damage. Medium capacity interchangeable panel system permits easy custom configurations. The optional CE #PNL-106 Panel will mount 6 connectrix connectors. (11 sq. in. panel area) Welded steel construction, lid and mounting flange 11 ga. (.120 thick), box assembly 16 ga. (.060 thick). Resists bending under even the most severe stage loads. Removable spring loaded hinge pins permits easy exchange of lids for carpet lid, locking lid and other custom applications. Generous cable way slot 3/8 x 4 permits easy cable exit from the pocket, even for large gauge speaker cables. cableway slot closure channel closes the slot when not in use. Easy installation into 8.5 x 4.75 cutout in stage floor. Open easy access from top or back to connector panels. Scratch/wear resistant finish, oven cured powder coat electro- static applied inside and outside. Decorator neutral antique copper vein, antique silver vein or textured black finishes are standard. Rubber lid stops cradle the lid to prevent lid rattle. Brass and Stainless Steel versions available by special order. HLF STGE POCKET TOP VIEWS Half Stage Pocket with antique silver vein finish (left) and standard lid. Half Stage Pocket with stainless steel trim bezel (right) and recessed carpet lid. Choose from five decorator finishes and a variety of custom application lids. HLF STGE POCKET CCESSORIES The Half Stage Pocket is available with a variety of bezel-lid assemblies including a carpet or standard lid and a bezel-lid assembly with a choice of 3 different keyed locks (shown below). B C Half Pocket Model Numbers MODEL # DESCRIPTION #123CLBK...Black Half Pocket w/ Carpet Lid #123CLCV...Copper Vein Half Pocket w/ Carpet Lid #123LLBK...Black Half Pocket w/ Lid Punched for Lock #123SLBK...Black Half Pocket w/ Standard Lid #123SLCV...Copper Vein Half Pocket w/ Standard Lid #223CLBR...Brass Half Pocket w/ Carpet Lid #223SLBR...Brass Half Pocket w/ Standard Lid HLF POCKET CUT-OUT DIMENSIONS 11 GUGE (.120" THICK) STEEL TRIM BEZEL ND LID SSEMBLY WITH POWDER COT FINISH INSIDE ND OUTSIDE NTIQUE COPPER VEIN NTIQUE SILVER VEIN TEXTURED BLCK BRUSHED BRSS* STINLESS STEEL* *Solid Brass or Stainless Steel Metal *Finish vailable as Special Order TOP VIEW 4.75" x 8.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #103BBX BCK BOX CPTIVE SLOT CLOSURE DROPS INTO BOX WHEN CBLE WY SLOT IS IN USE " CBLE WY SLOT Half Stage Pocket loaded with (1) #PNL-106 aluminum panel. The #PNL-106 panel holds up to 6 Connectrix connectors. Inset image illustrates the back access opening for connector finishing. Three different types of keyed locks with trim bezels are available for CE Vertical Slant and Horizontal Panel Pockets (Note: No Locking Lid for Carpet or Mini Pocket): ) Lock (S): Standard Flat Head Screwdriver Lock (screwdriver not included). B) Lock (H): Standard 5/32 llen Key Wrench (key included). C) Lock (K): Tubular Butterfly Key Lock (key included) " 6.875" TRIM BEZEL FRONT VIEW OPTIONL BCK BOX WELDED 14 GUGE (.071" THICK) STEEL 10" X 6.5" X 6" ZINC PLTED (CE #103BBX BCK BOX) OR OPTIONL BCK CCESS COVER 14 GUGE (.071" THICK) STEEL ZINC PLTED (CE #23BC BCK CCESS COVER - NOT SHOWN) " The Half Stage Pocket is also available with an optional Back Box (#103BBX) and a Back ccess Cover (#23BC) (shown below). For more information on these products see pages 16 and 17 for details. Half Stage Pocket Back ccess Cover (#23BC) See Page " 4.625" 6 The #PNL-106 luminum Panel loaded with 6 Neutrik #NC3FPP connectors. luminum panel engraved with custom lettering. See pages for panel specs and stock connectors. Half Stage Pocket Back Box (#103BBX) See Page 16 UL Listed compliance Standard 514 file FLOOR BOX 44LK Suitable for raised floor applications 4.75" x 8.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #103BBX BCK BOX 4.75" 6 8

7 HLF STGE POCKET SPECIFICTIONS 6.875" 4.375" LISTED ll Dimensions are for reference only TOP VIEW.375" CBLE WY SLOT 10 CPTIVE SLOT CLOSURE DROPS INTO BOX WHEN CBLE WY SLOT IS IN USE NOMINL OPENING "CONNECTRIX" FLEXIBLE CONNECTOR ND PNEL SYSTEM Choose Pre-fabricated audio, communications, data, electric, video, and voice connectors and panels or create custom panels as needed using the "Connectrix" System of panels and connectors. 11 GUGE (.120" THICK) STEEL TRIM BEZEL ND LID SSEMBLY WITH POWDER COT FINISH INSIDE ND OUTSIDE NTIQUE COPPER VEIN NTIQUE SILVER VEIN TEXTURED BLCK BRUSHED BRSS* STINLESS STEEL* *Solid Brass or Stainless Steel Metal *Finish vailable as Special Order REMOVBLE HINGE PINS PERMIT ESY LID EXCHNGE FOR CUSTOM LID CONFIGURTIONS 4.75" x 8.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #103BBX BCK BOX HLF POCKET CCESSORIES () Optional Back ccess Cover 14 gauge Steel Zinc Plated (#23BC) or (B) Optional Back Box Welded 14 gauge Steel 10 L x 6-1/2 W x 6 H Zinc Plated (#103BBX) See Pgs STNDRD HLF POCKET PNELS Many pre-cut stock connector panels are available. The panels mount with (4) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes. Made of tough aircraft alloy aluminum, 1/16 thick, and finished with oven cured semi-gloss black powder coat. Most panels provide header space for custom engraving. See Pgs OPTIONL BCK BOX WELDED 14 GUGE (.071" THICK) STEEL 10" X 6.5" X 6" ZINC PLTED (CE #103BBX BCK BOX) OR OPTIONL BCK CCESS COVER 14 GUGE (.071" THICK) STEEL ZINC PLTED (CE #23BC BCK CCESS COVER - NOT SHOWN) TRIM BEZEL 4 4 FRONT VIEW 6.000" SECTION VIEW OPEN BCK CCESS 6.000" 7/8" NOM " NOM. 1 NOMINL 3.656" 8.000" 7.187" 16 GUGE (.060" THICK) WELDED STEEL POCKET BODY CONSTRUCTION 4.375" 4.625" " 6 INSTLLTION OF PNEL INTO HLF STGE POCKET The images at right show the #123SLBK Black Powder Coat Half Pocket with Standard Lid installed into a carpeted floor. () Shows the open Half Pocket with back access opening. (B) Shows the #PNL-106 Panel placed into the Half Pocket. (C) Shows the #PNL-106 panel installed into the Half Pocket. (D) Shows the Half Pocket in a finished installation w/ lid closed. B C D 7

8 FULL STGE POCKET Heavy duty steel flush stage pocket conceals audio, video, data, communications, C power, switches etc. below the floor surface for easy access and to prevent connector damage. Large capacity #PNL-100 and #PNL- 120 series multi-panel system permits easy custom configurations. Two optional CE #PNL-100 series panels will mount 12 connectrix connectors. See pages for panel specifications. Welded steel construction, lid and mounting flange 11 ga. (.120 thick), box assembly 16 ga. (.060 thick). Resists bending under even the most severe stage loads. Removable spring loaded hinge pins permit easy exchange of lid for carpet lid, locking lid and other custom application lids. Generous cable way slot 3/8 x 8 permits easy cable exit from the pocket, even for large gauge speaker cables. cableway slot closure channel closes the slot when not in use. Easy installation into 8.5 square cutout in stage floor. Open easy access from top or back to connector panels. Scratch/wear resistant finish, oven cured powder coat electro- static applied inside and outside. Decorator neutral antique silver vein, antique copper vein or textured black finishes are standard. Rubber lid stops cradle the lid to prevent lid rattle. Brass and stainless steel pockets feature removable lid with brushed finish. Specify: #222-CLBR Brass Full Pocket, Carpet Lid #222-SLBR Brass Full Pocket, Standard Lid #322-CLSS Stainless Steel Full Pocket Carpet Lid #322-SLSS Stainless Steel Full Pocket, Standard Lid Full Stage Pocket with Brass or Stainless Steel brushed metal finish and carpet lid. lso available with standard brushed metal lid. INSET: Full Stage Pocket with brushed Stainless Steel finish and optional locking lid. FULL STGE POCKET CE s Full Stage Pocket #122SLBK (below) with (1) optional #PE Single Gang Electric Switch Box with steel mounting panel and (1) optional custom loaded #PNL-106 panel with (6) stock audio connectors. The Full Pocket has a black, oven-cured textured finish and standard lid. Choose from five decorator finishes and a variety of custom application lids. B Full Stage Pocket with - (1) #PNL-106 panel and B- (1) #PE Single Gang Electric Switch Box with steel mounting panel. FULL STGE POCKET CCESSORIES The Full Stage Pocket is available with a variety of bezel-lid assemblies including a carpet or standard lid and a bezel-lid assembly with a choice of 3 different keyed locks (see below). B C Three different types of keyed locks with trim bezels are available for CE Vertical Slant and Horizontal Panel Pockets (Note: No Locking Lid for Carpet or Mini Pocket): ) Lock (S): Standard Flat Head Screwdriver Lock (screwdriver not included). B) Lock (H): Standard 5/32 llen Key Wrench (key included). C) Lock (K): Tubular Butterfly Key Lock (key included). The Full Stage Pocket is also available with an optional Back Box (#102BBX) and a Back ccess Cover (#22BC) (shown below). For more information on these products see pages 16 and 17 for details. Full Pocket Model Numbers MODEL # DESCRIPTION #122CLBK...Black Full Pocket w/ Carpet Lid #122CLCV...Copper Vein Full Pocket w/ Carpet Lid #122LLBK...Black Full Pocket w/ Lid Punched for Lock #122SLBK...Black Full Pocket w/ Standard Lid #122SLCV...Copper Vein Full Pocket w/ Standard Lid #222CLBR...Brass Full Pocket w/ Carpet Lid #222SLBR...Brass Full Pocket w/ Standard Lid FULL POCKET CUT-OUT DIMENSIONS 8.5" x 8.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #102BBX BCK BOX CPTIVE SLOT CLOSURE DROPS INTO BOX WHEN CBLE WY SLOT IS IN USE TOP VIEW 8.000" TRIM BEZEL 11 GUGE (.120" THICK) STEEL TRIM BEZEL ND LID SSEMBLY WITH POWDER COT FINISH INSIDE ND OUTSIDE NTIQUE COPPER VEIN NTIQUE SILVER VEIN TEXTURED BLCK BRUSHED BRSS* STINLESS STEEL* *Solid Brass or Stainless Steel Metal *Finish vailable as Special Order 10 FRONT VIEW OPTIONL BCK BOX WELDED 14 GUGE (.071" THICK) STEEL 10" X 6.5" X 6" ZINC PLTED (CE #102BBX BCK BOX) OR OPTIONL BCK CCESS COVER 14 GUGE (.071" THICK) STEEL ZINC PLTED (CE #22BC BCK CCESS COVER - NOT SHOWN) 8.000" 8.250" " 8.5" x 8.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #102BBX BCK BOX.375" CBLE WY SLOT " Full Stage Pocket Back Box (#102BBX) See Page 16 8 Full Stage Pocket Back ccess Cover (#22BC) See Page 17 Full Stage Pocket image illustrating the Back ccess Opening allowing easy installation of connector panels and wire terminations. UL Listed compliance Standard 514 file FLOOR BOX 44LK Suitable for raised floor applications 8

9 FULL STGE POCKET SPECIFICTIONS " TOP VIEW 11 GUGE (.120" THICK) STEEL TRIM BEZEL ND LID SSEMBLY WITH POWDER COT FINISH INSIDE ND OUTSIDE NTIQUE COPPER VEIN NTIQUE SILVER VEIN TEXTURED BLCK BRUSHED BRSS* STINLESS STEEL* FULL POCKET CCESSORIES (-1). Optional Back ccess Cover 14 gauge Steel Zinc Plated (#22BC) (-2). Back ccess Cover being installed on Full Pocket (B-1). Optional Back Box Welded 14 gauge Steel 10 L x 10 W x 6 H Zinc Plated (#102BBX) (B-2). Full Pocket set into Back Box See Pgs *Solid Brass or Stainless Steel Metal *Finish vailable as Special Order 8.5" x 8.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #102BBX BCK BOX " CBLE WY SLOT 10 ll Dimensions are for reference only CPTIVE SLOT CLOSURE DROPS INTO BOX WHEN CBLE WY SLOT IS IN USE NOMINL OPENING B-1 B-2 LISTED "CONNECTRIX" FLEXIBLE CONNECTOR ND PNEL SYSTEM Choose Pre-fabricated audio, communications, data, electric, video, and voice connectors and panels or create custom panels as needed using the "Connectrix" System of panels and connectors. REMOVBLE HINGE PINS PERMIT ESY LID EXCHNGE FOR CUSTOM LID CONFIGURTIONS TRIM BEZEL OPTIONL BCK BOX WELDED 14 GUGE (.071" THICK) STEEL 10" X 6.5" X 6" ZINC PLTED (CE #102BBX BCK BOX) OR OPTIONL BCK CCESS COVER 14 GUGE (.071" THICK) STEEL ZINC PLTED (CE #22BC BCK CCESS COVER - NOT SHOWN) For more information on Connectrix Panels and Connectors see pages FRONT VIEW 6.000" SECTION VIEW OPEN BCK CCESS 6.000" 59/64" NOM " NOM. 1 NOMINL 3.656" 8.000" 7.187" 16 GUGE (.060" THICK) WELDED STEEL POCKET BODY CONSTRUCTION 8.000" 8.250" " " STNDRD FULL POCKET PNELS ND CONFIGURTIONS Many pre-cut stock connector panels are available. The panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes. Made of tough aircraft alloy aluminum, 1/16 thick, and finished with oven cured semi-gloss black powder coat. Most panels provide header space for custom engraving. The CE Full Stage Pocket has the capacity for either () (2) PNL-100 Series luminum Panels, (B) (2) PE Single Gang Electric Duplex Switch Boxes, (C) (1) PNL-100 Series luminum Panel + (1) PE Single Gang Electric Duplex Switch Box, or (D) (1) PNL-120 Series luminum Panel. See pages for panel information and specifications. B C D FULL POCKET FLEXIBILITY CE s Full Stage Pocket is designed with easy back access openings from the top or back allowing easy installation of connector panels and simple wire terminations. Full Pocket Back ccess Opening for easy panel installations 9

10 DOUBLE WIDE STGE POCKET Heavy duty steel flush stage pocket conceals audio, video, data, communications, C power, switches etc. below the floor surface for easy access and to prevent connector damage. Large capacity #PNL-100 and #PNL- 120 series multi-panel system permits easy custom configurations. Four optional CE #PNL-100 series panels will mount up to 24 connectrix connectors. Welded steel construction resists bending even under the most severe stage loads. The lid and mounting flange are made from 11ga. (.120 thick) steel and welded to a 16ga. (.060) steel pocket back body. Removable spring loaded hinge pins permit easy exchange of standard lid for carpet lid, locking lid and other custom application lids. Generous cable way slot 3/8 wide permits easy cable exit from the pocket even for large gauge speaker cables. Two accessible slot closures close the slot when not in use. Easy installation into 16.8 x 8.5 cutout in stage floor. Open easy access from top or back to connector panels. Scratch/wear resistant finish, oven cured powder coat, electro-static applied, inside and outside. Decorator antique copper vein, antique silver vein and textured black finishes are standard. Brass and stainless steel are special order. Rubber lid stops cradle lid to prevent lid rattle. DOUBLE WIDE STGE POCKET C E s D o u b l e Wide Stage Pocket #124SLBK (above) with (1) optional #PE Single Gang Electric Switch Box with steel mounting panel, (1) optional #PNL-100 Series panel and (1) #PNL-120 Series panel with various stock connectors. The Double Wide Pocket has a black, oven-cured textured finish and standard lid. Choose from five decorator finishes and a variety of custom application lids. DOUBLE WIDE STGE POCKET CCESSORIES The Double Wide Stage Pocket is available with a variety of bezel-lid assemblies including a carpet or standard lid and a bezel-lid assembly with a choice of 3 different keyed locks (see below). B C Double Wide Pocket Model Numbers MODEL # DESCRIPTION #124CLBK...Black Double Wide Pocket w/ Carpet Lid #124CLCV...Copper Vein Double Wide Pocket w/ Carpet Lid #124LLBK...Black Double Wide Pocket w/ Lid Punched for Lock #124SLBK...Black Double Wide Pocket w/ Standard Lid #124SLCV...Copper Vein Double Wide Pocket w/ Standard Lid #224CLBR...Brass Double Wide Pocket w/ Carpet Lid #224SLBR...Brass Double Wide Pocket w/ Standard Lid STNDRD DOUBLE WIDE POCKET PNELS ND CONFIGURTIONS Many pre-cut stock connector panels are available. The panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes. Made of tough aircraft alloy aluminum, 1/16 thick, and finished with oven cured semi-gloss black powder coat. Most panels provide header space for custom engraving. The CE Double Wide Stage Pocket has the capacity for a number of panel/connector configurations (see configurations below) using PNL-100 Series luminum Panels, PE Single Gang Electric Duplex Switch Box Panels, and PNL-120 Series luminum Panels. See pages for panel information and specifications. The images below of CE s Double Wide Stage Pocket with Copper Vein finish and standard lid illustrate the panel configuration flexibility. number of panel/connector configurations are available using the Connectrix System. See pages for details. Double Wide Stage Pocket Front / Top Open View Double Wide Stage Pocket Back ccess Opening View Three different types of keyed locks with trim bezels are available for CE Vertical Slant and Horizontal Panel Pockets (Note: No Locking Lid for Carpet or Mini Pocket): ) Lock (S): Standard Flat Head Screwdriver Lock (screwdriver not included). B) Lock (H): Standard 5/32 llen Key Wrench (key included). C) Lock (K): Tubular Butterfly Key Lock (key included). The Double Wide Stage Pocket is also available with an optional Back Box (#104BBX) and a Back ccess Cover (#24BC) (shown below). For more information on these products see pages 16 and 17 for details. Double Wide Stage Pocket Back Box (#104BBX) See Page 16 B C D Double Wide Stage Pocket Front / Top Closed View Double Wide Stage Pocket Back ccess Cover (#24BC) See Page 17 E UL Listed compliance Standard 514 file FLOOR BOX 44LK Suitable for raised floor applications 10

11 (2) CPTIVE SLOT CLOSURES DOUBLE WIDE STGE POCKET SPECIFICTIONS DOUBLE WIDE STGE POCKET SPECIFICTIONS DOUBLE WIDE STGE POCKET CUT-OUT DIMENSIONS 11 GUGE (.120" THICK) STEEL TRIM BEZEL ND LID SSEMBLY WITH POWDER COT FINISH INSIDE ND OUTSIDE NTIQUE COPPER VEIN NTIQUE SILVER VEIN TEXTURED BLCK BRUSHED BRSS* STINLESS STEEL* *Solid Brass or Stainless Steel Metal *Finish vailable as Special Order 16.8" x 8.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #104BBX BCK BOX 1.250" TYPICL TRIM BEZEL TOP VIEW 10 (2) CPTIVE SLOT CLOSURES DROP INTO BOX WHEN CBLE WY SLOT IS IN USE.375" CBLE WY SLOT " TOP VIEW " 18 TRIM BEZEL FRONT VIEW 4 11 GUGE (.120" THICK) STEEL TRIM BEZEL ND LID SSEMBLY WITH POWDER COT FINISH INSIDE ND OUTSIDE NTIQUE COPPER VEIN NTIQUE SILVER VEIN TEXTURED BLCK BRUSHED BRSS* STINLESS STEEL* " OPTIONL BCK BOX WELDED 14 GUGE (.071" THICK) STEEL 10" X 18" X 6" ZINC PLTED (CE #104BBX BCK BOX) OR OPTIONL BCK CCESS COVER 14 GUGE (.071" THICK) STEEL ZINC PLTED (CE #24BC BCK CCESS COVER - NOT SHOWN) 6.000" *Solid Brass or Stainless Steel Metal *Finish vailable as Special Order " " 16.8" x 8.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #104BBX BCK BOX.375" CBLE WY SLOT 1.250" TYPICL TRIM BEZEL 10 DROP INTO BOX WHEN CBLE WY SLOT IS IN USE NOMINL OPENING 8.5" x 16.5" CUTOUT IN STGE FLOOR WHEN MOUNTING IN STGE FLOOR WITHOUT CE #104BBX BCK BOX 8 LISTED "CONNECTRIX" FLEXIBLE CONNECTOR ND PNEL SYSTEM Choose Pre-fabricated audio, communications, data, electric, video, and voice connectors and panels or create custom panels as needed using the "Connectrix" System of panels and connectors. REMOVBLE HINGE PINS PERMIT ESY LID EXCHNGE FOR CUSTOM LID CONFIGURTIONS TRIM BEZEL 16 ll Dimensions are for reference only 4 4 FRONT VIEW 6.000" 59/64" NOM. SECTION VIEW OPEN BCK CCESS 1.875" NOM " OPTIONL BCK BOX WELDED 14 GUGE (.071" THICK) STEEL 10" X 18" X 6" ZINC PLTED (CE #104BBX BCK BOX) OR OPTIONL BCK CCESS COVER 14 GUGE (.071" THICK) STEEL ZINC PLTED (CE #24BC BCK CCESS COVER - NOT SHOWN) 1 NOMINL 3.656" 8.000" 7.187" 16 GUGE (.060" THICK) WELDED STEEL POCKET BODY CONSTRUCTION " " " " B Double Wide Stage Pocket Standard Flush Hinged Lid Double Wide Stage Pocket Recessed Carpet Flush Hinged Lid STNDRD DOUBLE WIDE POCKET LID SSEMBLIES Two standard Lid ssemblies are available for all CE Stage Pockets:.) Standard Flush Hinged Lids B.) Recessed Carpet Flush Hinged Lids Lids are fabricated from 11 ga. (.120 thick) steel. Recessed Carpet Flush Hinged Lids all maintain the same depth for the carpet recess area. The Standard Lid ssemblies specs are as follows: 1) Half Pocket Recessed Carpet Lid: 4-1/4 W x 7-3/8 L x 3/16 H, 2) Full Pocket Recessed Carpet Lid: 7-3/8 W x 7-3/8 L x 3/16 H, 3) Double Wide Pocket Recessed Carpet Lid: 15-3/4 W x 7-3/8 L x 3/16 H. Custom fabricated lid assemblies are also available, see page 31 for more information on our custom fabrication services. For more information on Connectrix Panels and Connectors see pages

12 SUPER STGE POCKET THE SUPER POCKET is the same size as the CE Full Pocket with Back Box except it provides almost 3 times the connectivity capacity using a HORIZONTL PNEL design. The basic construction incorporates 3 sub-assemblies. unique Bezel-Lid assembly with spring loaded blind hinge pins and hinged cableway slot closure that mounts directly to the CE #102BBX Back Box. ssembled in the Back Box is a set of panel mounting and C barrier isolation raceway brackets. The Bezel-Lid is a heavy duty welded 11 gauge (.120 thick) steel, solid brass or solid stainless steel assembly. Each Bezel is available with either a flat flush standard lid (SL) or a recessed carpet lid (CL). Steel Bezels with flush flat lids come in 3 oven cured powder coat decorator finishes: antique silver vein, antique copper vein or textured black. Solid Brass and Stainless Steel have a brushed finish and are available on a special order basis. The in-floor appearance is the same as the Full Pocket..) Super Pocket with a brushed brass trim bezel and recessed carpet lid. B.) Super Pocket with a brushed stainless steel trim bezel finish and standard brushed finished lid. SUPER STGE POCKETS Super Stage Pocket with (4) custom PNL-106 Panels and (2) duplex electric outlets The Super Stage Pocket has the capacity for up to 25* connectors and a barrier isolated raceway for (2) duplex electric outlets. This large connectivity capacity is possible using a Horizontal Panel Design and a set of panel mounting and.c. barrier isolation raceway brackets. Super Pocket Model Numbers MODEL # DESCRIPTION #132CLBK...Black Super Pocket w/ Carpet Lid #132CLCV...Copper Vein Super Pocket w/ Carpet Lid #132LLBK...Black Super Pocket w/ Lid Punched for Lock #132SLBK...Black Super Pocket w/ Standard Lid #132SLCV...Copper Vein Super Pocket w/ Standard Lid#232CLBR...Brass Super Pocket w/ Carpet Lid #232SLBR...Brass Super Pocket w/ Standard Lid SUPER STGE POCKET FLEXIBILITY X X The HORIZONTL PNEL in the SUPER POCK- ET is designed for high capacity connectivity. In less than one square foot (10.5 x10.5 ) the SUPER POCKET provides abundant panel space for up to 25 connectors* and a barrier isolated raceway ready for 2 duplex electric outlets (multiple circuits). Generous combination conduit knockouts on four sides provides in-out-and-thru ways for both low voltage and C electric cabling. The SUPER POCKET panel system is unique and flexible. Use any combination of standard CE pre-punched panels designed for the Full and/or Half Pockets, or choose a custom layout made to order aluminum connectrix or alumilam panel. Generous clearances above and below the panel(s) permit easy termination and access to an array of audio, video, data, communication and control connections. The SUPER POCKET and CE value added to its custom panel layouts, machining, engraving and assembly makes high capacity connectivity easy and economical. B For more information on Connectrix Panels and Connectors see pages *Note: Connector capacity limitations apply depending on connectors usde. SUPER STGE POCKET CCESSORIES The Super Stage Pocket is available with a variety of bezel-lid assemblies including a carpet or standard lid and a bezel-lid assembly with a choice of 3 different keyed locks (see below). B C Three different types of keyed locks with trim bezels are available for CE Vertical Slant and Horizontal Panel Pockets (Note: No Locking Lid for Carpet or Mini Pocket): ) Lock (S): Standard Flat Head Screwdriver Lock (screwdriver not included). B) Lock (H): Standard 5/32 llen Key Wrench (key included). C) Lock (K): Tubular Butterfly Key Lock (key included). The Super Stage Pocket is also available with an optional new polyurethane encapsulation process which provides for IN-GRDE applications. More information on the Polyurethane Encapsulated Super Stage Pockets (#BRK102BBXW) can be found on page 17. Polyurethane Encapsulated Super Stage Pocket (#BRK- 102BBXW) See Page 17 #DB and #DC Super Stage Pocket steel duplex cover panels UL Listed compliance Standard 514 file FLOOR BOX 44LK The Super Pocket Horizontal Panel Design and installation bracket kit provides room for up to 25 connectors* and a barrier isolated raceway for 2 duplex electric outlets. This design provides an C raceway isolated from the low volatage section (C duplex outlets are optional, see page 24). The center bracket Break-out (labeled X) bar must be removed to utilize the single panel (#PNL-1425) design. *Note that some limitations may apply depending on connectors installed. SUPER STGE POCKET PNELS ND CONFIGURTIONS C Many pre-cut stock connector panels are available. The panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the bracket mounting holes. Made of tough aircraft alloy aluminum, 1/16 thick, and finished with oven cured semi-gloss black powder coat. Most panels provide header space for custom engraving. See pages for panel information and specifications. B D 12

13 SUPER STGE POCKET SPECIFICTIONS TYPICL SUPER STGE POCKET SPECIFICTIONS FOR CONCRETE FLOOR INSTLLTION 1) 2) 3) 4) 5) 6) 7) 8) - Locate box and install conduit in accordance with local codes Secure box to reinforcing bars, mesh or otherwise to assure the box is fixed below the finished floor Grease the inside of the cement cover, the mating box flange and the box seams ttach the cover to the box and tape the seems Grease the outside of the cover NOMINL OPENING Pour concrete fter the concrete has set, remove the concrete cover Install wire and other devices as required The CE Full Pocket Back Box () is used to enclose the Full Pocket (B) in an in floor installation while the CE Super Pocket (D) uses a Bracket Kit ssembly (C) to configure the installation of panels and connectors inside the Super Pocket (E). LID (BLIND HINGE), SPRING LODED PINS, VILBLE IN STNDRD FLUSH, STNDRD FLUSH LOCKING, OR RECESSED CRPET REMOVBLE SPRING LODED HINGE PINS PERMIT ESY LID EXCHNGE FOR CRPET, LOCKING, ND STNDRD LID CONFIGURTIONS TRIM BEZEL MOUNTING FLNGE & LID SSEMBLY CRPET FLOOR LEVEL CRPET FLOOR LEVEL 8.000" SUPER STGE POCKET OR FULL POCKET BCK BOX? SUPER STGE POCKET BCK BOX #BRK102BBX 3.375" "CONNECTRIX" PNEL SYSTEM COMBINTION OF "#PNL-100", "#PNL-120", OR "#PNL-140" STGE POCKET PNELS CONCRETE FLOOR BRRIER ISOLTED C SECTION CRETED WHEN #BRK102 BRCKET KIT SSEMBLY IS INSTLLED.) #102BBX Back Box CONCRETE FLOOR BRRIER ISOLTED LOW VOLTGE SECTION CRETED WHEN #BRK102 BRCKET KIT SSEMBLY IS INSTLLED 2.335" 7.250" 2.530" " SQURE B.) #132SLSV Full Pocket loaded into #102BBX Back Box TYPICL SUPER STGE POCKET SPECIFICTIONS FOR WOOD FLOOR INSTLLTION 1) 2) 3) 4) 5) 6) 7) - Locate box and install conduit in accordance with local codes Secure box to wood floor framing, floor joist or otherwise to assure the box is fixed below the finished floor Provide support for the box equal to the floor loading requirements ccount for any height offset required for the finished floor Install wire and other devices as required using standard electrical conduit NOMINL NOMINL OPENING OPENING fter box and conduit are secured, complete the connector/panel installation Install trim bezel/lid hinge assembly to secured box with screws provided C.) #BRK102 Bracket Kit ssembly ll Dimensions are for reference only LID (BLIND LID HINGE), (BLIND SPRING HINGE), LODED SPRING PINS, LODED PINS, VILBLEVILBLE IN STNDRD IN STNDRD FLUSH, STNDRD FLUSH, STNDRD FLUSH LOCKING, FLUSHOR LOCKING, RECESSED OR RECESSED CRPET CRPET REMOVBLE REMOVBLE SPRING LODED SPRING LODED HINGE PINSHINGE PERMIT PINS ESY PERMIT LID ESY LID EXCHNGEEXCHNGE FOR CRPET, FOR LOCKING, CRPET, LOCKING, ND STNDRD ND STNDRD LID CONFIGURTIONS LID CONFIGURTIONS TRIM BEZELTRIM BEZEL MOUNTING MOUNTING FLNGE & FLNGE & LID SSEMBLY LID SSEMBLY CRPET FLOOR LEVEL CRPET FLOOR LEVEL 8.000" WOOD FLOOR 3.375" 8.000" SET THE SUPER SET THE STGE SUPER POCKET STGE POCKET BCK BOX BCK #BRK102BBX BOX #BRK102BBX SECURELY SECURELY BRCED INTO BRCED THE FLOOR INTO THE TO PROVIDE FLOOR TO PROVIDE SUPPORT EQUL SUPPORT TO THE EQUL FLOOR TO THE FLOOR LODING REQUIREMENTS, LODING REQUIREMENTS, CCOUNTING CCOUNTING FOR NY HEIGHT FOR NY OFFSET HEIGHT REQUIRED OFFSET REQUIRED FOR THE FINISHED FOR THEFLOOR FINISHED FLOOR SUPER STGE SUPER POCKET STGE POCKET BCK BOX BCK #BRK102BBX BOX #BRK102BBX WOOD FLOOR 3.375" BRRIER ISOLTED BRRIER ISOLTED "CONNECTRIX" "CONNECTRIX" PNEL SYSTEM PNEL SYSTEM C SECTION C CRETED SECTION CRETED COMBINTION COMBINTION OF "#PNL-100", OF "#PNL-100", WHEN #BRK102 WHEN BRCKET #BRK102 BRCKET "#PNL-120","#PNL-120", OR "#PNL-140" OR "#PNL-140" KIT SSEMBLY KIT SSEMBLY IS INSTLLED IS INSTLLED STGE POCKET STGE PNELS POCKET PNELS WOOD WOOD FLOOR FLOOR FRMING FRMING 2.335" CRPET FLOOR LEVEL CRPET FLOOR LEVEL WOOD FLOOR D.) #BRK102BBX with Bracket Kit Installed WOOD FLOOR WOOD WOOD FLOOR FLOOR FRMING FRMING BRRIER ISOLTED BRRIER ISOLTED LOW VOLTGE LOWSECTION VOLTGE SECTION WHEN CRETED #BRK102 WHEN #BRK " CRETED BRCKET KIT BRCKET SSEMBLY KIT SSEMBLY E.) #132SLBK Black Super Pocket with Standard Lid IS INSTLLED IS INSTLLED 7.250" 7.250" 2.530" 2.530" " SQURE " SQURE 13

14 SUPER DOUBLE WIDE STGE POCKET The SUPER DOUBLE WIDE POCKET is the same size as the CE Double Wide Pocket with Back Box except it provides almost 2 times the connectivity capacity using a HORIZONTL PNEL design. The basic construction incorporates 3 sub-assemblies. unique Bezel- Lid assembly with spring loaded blind hinge pins and hinged cableway slot closures mounted directly to the #104BBX Double Wide Back Box. ssembled in the Back Box is a set of panel mounting brackets. The Bezel-Lid is a heavy duty welded 11 gauge (.120 thick) steel, solid brass or solid stainless steel assembly. Each Bezel is available with either a flat flush standard lid (SL) or a recessed carpet lid (CL). Steel Bezels with flush flat lids come in 3 oven cured powder coat decorator finishes: antique silver vein, antique copper vein or textured black. Solid Brass and Stainless are brushed hand finished and available on a special order basis. The in-floor appearance is the same as the Double Wide Pocket. SUPER DOUBLE WIDE STGE POCKET Super Double Wide Stage Pocket with custom Panels and a duplex electric outlet The Super Double Wide Stage Pocket has the capacity for up to 48 connectors. This large connectivity capacity is possible using the Horizontal Panel Design and a bracket kit assembly. The Super Double Wide Pocket ease of installation and flexible Panel System make it economic and efficient. Super Double Wide Pocket Model Numbers MODEL # DESCRIPTION #134CLBK...Black Super Double Wide Pocket w/ Carpet Lid #134CLCV...Copper Vein Super Double Wide Pocket w/ Carpet Lid #134LLBK...Black Super Double Wide Pocket w/ Lid Punched for Lock #134SLBK...Black Super Double Wide Pocket w/ Standard Lid #134SLCV...Copper Vein Super Double Wide Pocket w/ Standard Lid #234CLBR...Brass Super Double Wide Pocket w/ Carpet Lid #234SLBR...Brass Super Double Wide Pocket w/ Standard Lid SUPER DOUBLE WIDE STGE POCKET FLEXIBILITY B Top view of a Super Double Wide Stage Pocket with a black powder coat finish and custom panels installed. The HORIZONTL PNEL in the SUPER DOUBLE WIDE POCKET is designed for high capacity connectivity. In less than two square feet (10.5 x 18.5 ) the SUPER DOUBLE WIDE POCKET provides abundant panel space for up to 48 connectrix connectors. Generous conduit combination knockouts on four sides provides in-out-and-thru ways. The SUPER POCKET panel system is unique and flexible. Use any combination of standard CE pre-punched panels designed for the Full and Half Pockets, or choose any custom layout lumi-lam or luminum panel made to order. Generous clearances above and below the panel(s) permit easy termination and access to the broadest array of audio, video, data, communication and control connections. The SUPER DOUBLE WIDE POCKET and CE value added to its custom panel layouts, machining, engraving and assembly makes high capacity connectivity easy and economical. SUPER DOUBLE WIDE STGE POCKET CCESSORIES The Super Double Wide Stage Pocket is available with a variety of bezel-lid assemblies including a carpet or standard lid and a bezel-lid assembly with a choice of 3 different keyed locks (see below). B C Three different types of keyed locks with trim bezels are available for CE Vertical Slant and Horizontal Panel Pockets (Note: No Locking Lid for Carpet or Mini Pocket): ) Lock (S): Standard Flat Head Screwdriver Lock (screwdriver not included). B) Lock (H): Standard 5/32 llen Key Wrench (key included). C) Lock (K): Tubular Butterfly Key Lock (key included). The Super Double Wide Stage Pocket is also available with an optional new polyurethane encapsulation process which provides for IN- GRDE applications. More information on the Polyurethane Encapsulated Super Double Wide Stage Pockets (#BRK104BBXW) can be found on page 17. Polyurethane Encapsulated Super Double Wide Stage Pocket (#BRK104BBXW) See Page 17 UL Listed compliance Standard 514 file FLOOR BOX 44LK C Image () shows a Super Double Wide Stage Pocket with installed Bracket Kit ssembly. This pocket can support up to 48 connectors in the same size area as the Double Wide Pocket. Image (B) shows panels mounted into the pocket utilizing the panel mounting Bracket Kit ssembly (which is pre-assembled for quick and easy panel/connector loading). Image (C) shows the Super Double Wide Stage Pocket with an installed Trim Bezel Lid ssembly while Image (D) shows how the pocket will look during final installation. SUPER DOUBLE WIDE STGE POCK- ET PNELS ND CONFIGURTIONS C D Many pre-cut stock connector panels are available. The panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the bracket mounting holes. Made of tough aircraft alloy aluminum, 1/16 thick, and finished with oven cured semi-gloss black powder coat. Most panels provide header space for custom engraving. See pages for panel information and specifications. D B For more information on Connectrix Panels and Connectors see pages

15 "CONNECTRIX" PNEL SYSTEM SUPER DOUBLE WIDE STGE POCKET SPECIFICTIONS TYPICL SUPER DOUBLE WIDE STGE POCKET SPECIFICTIONS FOR CONCRETE FLOOR INSTLLTION 1) - Locate box and install conduit in accordance with local codes 2) - Secure box to reinforcing bars, mesh or otherwise to assure the box is fixed below the finished floor 3) - Grease the inside of the cement cover, the mating box flange and the box seems 4) - ttach the cover to the box and tape the seems 5) - Grease the outside of the cover 6) - Pour concrete 7) - fter the concrete has set, remove the concrete cover 8) - Install wire and other devices as required SUPER DOUBLE WIDE STGE POCKET SPECIFICTIONS TYPICL SUPER DOUBLE WIDE STGE POCKET SPECIFICTIONS FOR WOOD FLOOR INSTLLTION 1) - Locate box and install conduit in accordance with local codes 2) - Secure box to wood floor framing, floor joist, or otherwise to assure the box is fixed below the finished floor 3) - Provide support for the box equal to the floor loading requirements 4) - ccount for any height offset required for the finished floor 5) - Install wire and other devices as required using standard electrical conduit 6) - fter box and conduit are secured, complete the connector/panel installation 7) - Install trim bezel/lid hinge assembly to secured box with screws provided " TOP TOP VIEW SUPER DOUBLE WIDE POCKET TRIM BEZEL LID SSEMBLIES Super Double Wide Stage Pockets are available with.) Standard Flush Hinged Lid Trim Bezel ssemblies and B.) Recessed Carpet Flush Hinged Lid Trim Bezel ssemblies. Standard Flush Hinged Lid Trim Bezel ssemblies (SL) are available in 3 decorator powder coat finishes: nitque Copper Vein, ntique Silver Vein, and Black. Recessed Carpet Flush Hinged Lid Trim Bezel ssemblies (CL) are finished Black and are recessed permitting carpet to be glued in for a custom decorator appearance. Standard and Carpet Brushed Brass and Stainless Steel Trim Bezels are also available as a special order. 11 GUGE (.120" THICK) STEEL TRIM BEZEL MOUNTING FLNGE ND LID SSEMBLY WITH POWDER COT FINISH INSIDE ND OUTSIDE NTIQUE COPPER VEIN NTIQUE SILVER VEIN TEXTURED BLCK BRUSHED BRSS* STINLESS STEEL* *Solid Brass or Stainless Steel Metal *Finish vailable as Special Order B.375" CBLE WY SLOT 1.250" TYPICL TRIM BEZEL 10 NOMINL OPENING LID (BLIND HINGE), SPRING LODED PINS, VILBLE IN STNDRD FLUSH, STNDRD FLUSH LOCKING, OR RECESSED CRPET TRIM BEZEL MOUNTING FLNGE ND LID SSEMBLY ll Dimensions are for reference only REMOVBLE SPRING LODED HINGE PINS PERMIT ESY LID EXCHNGE FOR CRPET, LOCKING, ND STNDRD LID CONFIGURTIONS.937" LID STOP WITH RUBBER PD, 2 PLCES " (2) HINGED CBLE WY SLOT CLOSURES 8.000" SUPER DOUBLE WIDE STGE POCKET BCK BOX #BRK104BBX 14 GUGE SHEET STEEL CRS (.071" THICK) WITH CLER ZINC FINISH FRONT SECTION SET THE SUPER STGE POCKET BCK BOX #BRK104BBX SECURELY BRCED INTO THE FLOOR TO PROVIDE SUPPORT EQUL TO THE FLOOR LODING REQUIREMENTS, CCOUNTING FOR NY HEIGHT OFFSET REQUIRED FOR THE FINISHED FLOOR SUPER DOUBLE WIDE STGE POCKET BCK BOX #BRK104BBX 14 GUGE SHEET STEEL CRS (.071" THICK) WITH CLER ZINC FINISH 3.281" RIGHT SIDE SECTION "CONNECTRIX" PNEL SYSTEM COMBINTION OF "#PNL-100", "#PNL-120", OR "#PNL-140" STGE POCKET PNELS 6.000" COMBINTION OF "#PNL-100", "#PNL-120", OR "#PNL-140" STGE POCKET PNELS COMBINTION KNOCK-OUTS 1/2", 3/4", ND 1-1/4", 2 PLCES TYPICL ON OPPOSING SIDES 2.375" COMBINTION KNOCK-OUTS 1/2" ND 3/4", 1 PLCE TYPICL ON OPPOSING SIDES 1.312" 1.000" 1.312" " 1.312" " 5.000" " EXTR DEEP BCK BOXES* #102DDBBX #104DDBBX #SO-200 #SO-201 ) #102DDBBX Double Deep Back Box for all CE Full Pockets, 10 x 10 x 12 B) #104DDBBX Double Deep Back Box for all CE Double Wide Pockets, 10 x 18 x 12 C) #SO-200 Super Deep Back Box, 10 x 10 x 8 D) #SO-201 Super Deep Double Wide Back Box, 10 x 18 x 8 * Special application Back Boxes NOT UL Listed B C D 15

16 BCK BOXES BCK BOXES (#BBX) The #102BBX, #103BBX and #104BBX Back Boxes are welded 14 gauge steel with a protective cover that is discarded when the pocket body is finally installed. The box and cover have a clear zinc corrosion resistant finish. 1/2 mounting flange is predrilled to mate with the pocket body flange. The pocket body assembly is 4.5 deep and the back box is 6 deep providing a 1.5 work clearance in the bottom of the back box (ideal for feed thru or distribution junction). The clearance volume is 445 sq. in. in the #104BBX, 146 sq. in. in the #102BBX, and 92 sq. in. in the #103BBX. ce Back Boxes come with standard Electrical Conduit Combination 1/2, 3/4, 1, and 1-1/4 Knock Outs, 2 places typical on opposing sides (see Knock Outs labeled on diagrams to the right) and Electrical Conduit Combination 1/2 and 3/4 Knock Outs, 1 place typical on opposing sides (see Knock Outs labeled B on diagrams to the right). #BBX BCK BOX IMGES The following images illustrate how CE Half, Full, and Double Wide Stage Pockets are placed into the #BBX Back Boxes. For more information on CE s Back Boxes, visit Check Out for more info on Back Boxes #102BBX #104BBX #103BBX Back Box Model Numbers MODEL # DESCRIPTION #102BBX... Back Box for Full Pocket #102DDBBX... Double Deep Back Box for Full Pocket #103BBX... Back Box for Half Pocket #104BBX... Back Box for Double Wide Pocket #104DDBBX... Double Deep Back Box for Double Wide Pocket #BRK Bracket Kit ssembly for #102BBX Back Box #BRK Bracket Kit ssembly for #104BBX Back Box #SO Super Back Box 10 W x 10 L x 8 H #SO Super Double Wide Back Box 10 W x 18 L x 8 H UL Listed compliance Standard 514 in combination with inner floor pocket file FLOOR BOX 44LK MTERIL: 14 Gauge Sheet Steel CRS (.071 Thick) FINISH: Clear Zinc, Mil Spec QQ-Z-325E Type I, Class II FBRICTION: Precision die formed and jig welded See our Extra Deep specialty Back Boxes on page 15 GENERL INSTLLTION OF BCK BOXES (#BBX) The #102BBX, #103BBX and #104BBX Back Boxes are designed exclusively for use with CE FULL, HLF and DOUBLE WIDE POCKETS respectively. Set the back box securely braced into the floor to provide support equal to the floor loading requirements, accounting for any height offset required for the finished floor. Standard electrical conduit may be connected to the back box on any side via combination knock-outs. The protective cover is discarded when the finish pocket is installed. Mating screw holes are provided to secure the pocket flange to the back box flange. #102BBX FULL POCKET BCK BOX The #102BBX is for all CE Full Stage Pockets 6" 10" 7-1/2" 1-1/4" Disposable Cover 10" B 1" 5" BRCKET KIT SSEMBLIES (#BRK) Full Pocket Back Box (1) with Bracket Kit ssembly (2) installed is model #BRK102BBX which makes the Super Pocket (3). Double Wide Pocket Back Box (B1) with Bracket Kit ssembly (B2) installed is model #BRK- 104BBX which makes the Super Double Wide Pocket (B3). #103BBX HLF POCKET BCK BOX The #103BBX is for all CE Half Stage Pockets 6" 6-1/2" Disposable Cover 10" B 1 2 B1 B2 #104BBX DOUBLE WIDE POCKET BCK BOX The #104BBX is for all CE Double Wide Stage Pockets 10" 7-1/2" 1-1/4" 1" Disposable Cover 18" 3-1/4" 6" 3 B3 B ll Dimensions are 15-1/2" 1" 5" 16 for referencee only 1-1/4" 1-1/4"

17 POLYURETHNE ENCPSULTED BCK BOXES IN-GRDE WET PPLICTION BCK BOXES POLYURETHNE ENCPSU- LTED (#BBXW) New polyurethane encapsulated back boxes are now available to provide for IN-GRDE applications. Using our standard double zinc plated back boxes (BBX), a 1/16 thick jacket of polyurethane is applied to the exterior sides and bottom of the Back Boxes permanently bonding with surfaces to form a watertight and airtight shield. ll seams, holes, and knock-outs are effectively sealed against the incursion of moisture and water. The polyurethane encapsulated back boxes provide great protection against abrasion, chemicals, impact, and harsh climates. ll polyurethane encapsulated back boxes in the Stage Pocket ccessories Back Box section will have a model number suffix of W. Wet pplication Polyurethane Encapsulated Back Box Model Numbers* MODEL # DESCRIPTION #102BBXW... Full Pocket Back Box - Polyurethane Encapsulated #103BBXW... Half Pocket Back Box - Polyurethane Encapsulated #104BBXW... Double Wide Pocket Back Box - Polyurethane Encapsulated #102DDBBXW... Double Deep Full Pocket Back Box - 10 W x 10 L x 12 H - Polyurethane Encapsulated #104DDBBXW... Double Deep Double Wide Pocket Back Box - 10 W x 18 L x 12 H - Polyurethane Encapsulated #BRK102BBXW... Super Pocket Back Box with Bracket Kit ssembly - 10 W x 10 L x 6 H - Polyurethane Encapsulated #BRK104BBXW... Super Double Wide Pocket Back Box with Bracket Kit ssembly - 10 W x 18 L x 6 H - Polyurethane Encapsulated #SO-200W... 8 Deep Super Pocket Back Box with Bracket Kit ssembly - 10 W x 10 L x 8 H - Polyurethane Encapsulated #SO-201W... 8 Deep Super Double Wide Pocket Back Box w/ Bracket Kit ssembly - 10 W x 18 L x 8 H - Polyurethane Encapsulated * Special application back box NOT UL Listed EXTR DEEP BCK BOXES Extra Deep Back Boxes (#DDBBX and #SO) are also available from CE. See page 15. #103BBXW* #102BBXW* #104BBXW* #SO-200* #SO-201* BCK CCESS COVERS BCK CCESS COVERS (#BC) The #22BC, #23BC and #24BC are closures for the back access opening on the CE Full Pockets, Half Pockets, and Double Wide Pockets, respectively. The BC provides 1/2 and 3/4 combination conduit knock-outs for easy conduit terminations. Use the BC with Double, Full or Half Pocket installations requiring wire closure. (The larger CE #BBX Back Boxes, #PE, and #P3E Electrical Panels cannot be used with the BC.) The BC is easy to install on to the Double, Half or Full Pocket body and permits many options in the typical installation sequence. The BC is precision formed to slide onto the back access opening of the pocket body. During rough-in the BC may be connected to the combination knock outs, 1/2 or 3/4, with flex conduit and temporarily left tacked to the floor joist approximately where the pocket is to be installed. ll the wire can be pulled and low voltage terminations to various connectors completed and ready for final installation into the pocket. The BC is smaller than the cutout in the stage floor and can easily be pulled through the cutout for assembly to the pocket body. Two self-tapping sheet metal attachment screws are provided. The pocket assembly can then be dropped into the stage cutout and all the panel/ plate sub-assemblies finally installed. The BC provides a closure for the open back access architecture of the Double, Full and Half Pockets while maintaining the benefits of easy installation. The sequence of installation can be varied such that all terminations are completed early in the job. t final installation simply screw the parts together and screw the pocket into floor. Or wait until the final install phase and do all the terminations, assembly and pocket body installation. #SO-200W* #SO-201W* Back ccess Cover Model Numbers MODEL # DESCRIPTION #22BC... Back ccess Cover for Full Pocket #23BC... Back ccess Cover for Half Pocket #24BC... Back ccess Cover for Double Wide Pocket MTERIL: 14 Gauge Sheet Steel CRS (.071 Thick) FINISH: Clear Zinc, Mil Spec QQ-Z-325E Type I, Class II FBRICTION: Precision die formed UL Listed compliance Standard 514 in combination with inner floor pocket file FLOOR BOX 44LK The #22BC Back ccess Cover Full Pocket installation is quick and easy. Three steps and the installation is completed. #23BC #22BC #24BC Check Out for more information! 17

18 PNEL MTERILS ND SPECIFICTIONS STOCK STNDRD CONNECTRIX LUMINUM PNELS (#PNL-100, #PNL-120, ND #PNL-140) Standard Panels (#PNL-100, #PNL-120, #PNL-140) are created from high strength aluminum alloy (6061-T6) that is.062 or.125 thick. Each standard blank panel is finished with electro-static applied, oven-cured black semi-gloss powder coat. Engraving the standard blank is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. CE standard panels are flat, strong, and rigid like the typical thinner mild steel panels. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. ll CE panels will mount separately or in combination in Half, Full, Double Wide, Super, and Super Double Wide Pockets. The machined Connectrix style cutouts combine popular mounting pattern of the Neutrik D series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors. On the connectrix system panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCs, mic jacks, speaker jacks, and numerous other standard connectors without a single custom punch. ll Dimensions are for reference only. #PNL-140 PNEL SPECIFICTIONS The #PNL-140 luminum Pocket panels may accommodate up to 20 connectrix connectors without removing the center break-out bar in the Super Pocket. This pocket and panel design allow the maximum number of connectors to be installed in the Super Pocket without modification. #PNL-1425 PNEL SPECIFICTIONS The #PNL-1425 luminum Pocket panels may accommodate up to 25 connectrix connectors by removing the center break-out bar in the Super Pocket. This pocket and panel design allows an extra row of 5 connectors to be loaded into the panel, creating a high density, high utility pocket system. 1" 7.375" 5.856" 1" 7.375" 5.856" 2.687" 3.688".25".25" 2.687" 3.688".25".25" NET LYOUT RE square inches NET LYOUT RE square inches 8.032" 8.532" 8.532" 9.032" Center "Break-Out" Bar removed on Super Pocket 9.032".25".25".203" DI. HOLE (6 PLCES) 5.856".5".203" DI. HOLE (6 PLCES) 5.856".5" #MP-100 PNEL SPECS #PNL-100 ND #PNL-120 PNEL SPECIFICTIONS 3.685" 7.38".25".25" 2.00".203" DI. (2 PLCES).25".5".5" 2.69" 3.7" 2.69" NET LYOUT RE: 11.1 square inches NET LYOUT RE: 24.1 square inches 2.00" 4.5" 4" 3.5" 3.5" 1.25".775".950" 2.50".062" RD. TYPICL.203" DI. HOLE 4 PLCES.203" DI. HOLE 6 PLCES 3.18" 6.86" 18

19 CONNECTRIX SYSTEM PNELS ND CONNECTIVITY CONNECTRIX SYSTEM PNELS MEN CONNECTIVITY USING NEUTRIK D ND SWITCHCRFT E PTTERNS The Connectrix system expands connectivity different connector layout patterns. Each standard possibilities utilizing a new panel cutout detail and blank is finished with electro-static applied, oven an array of standard and new isolated connectors. cured black simi-gloss powder coat. Engraving This system provides more connectors and mounting the standard blank is fast and easily accomplished options in stock standard CE panels. The on a separate dedicated CNC engraving routing benefit is faster order turn around and lower cost. machine. The finished panels show bright aluminum Less custom fabrication for custom spec results in the engraved characters and need not be with off-the-shelf stock prices. The Connectrix back filled. The Connectrix system connectors system panels are flat and strong. Made from high combine popular mounting pattern of the Neurtrik strength aluminum alloy (6061-T6) that is.062 or D series connectors with a generous rectangular.125 thick, they are ridged like the typical thinner cutout that mates with a growing array of adaptermounted mild steel panels. standard connectors. Because they are CNC rotary machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. These panels are made and stocked for all CE stage pockets plus an assortment of standard 19 rack panels. The Connectrix system panels are easily engraved. The strong flat aluminum system panels are cut in array of The adapter mount is plastic and provides ground isolation between the panel and connector. On the connectrix system panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. Connectors are loaded with black aluminum pop rivets. Stock Connectrix Panel Model Numbers MODEL # DESCRIPTION #MP Mini Panel Machined for 1 Connectrix Mounts #MP Mini Panel Machined for 2 Connectrix Mounts #PNL Panel Blank (4-1/2 H x 3-11/16 W) #PNL Panel Blank (4-1/2 H x 7-6/16 W) #PNL Panel Blank (9-1/16 H x 7-6/16 W) #PNL Panel Machined for 2 Connectrix Mounts #PNL Panel Machined for 3 Connectrix Mounts #PNL Panel Machined for 4 Connectrix Mounts #PNL Panel Machined for 5 Connectrix Mounts #PNL Panel Machined for 6 Connectrix Mounts #PNL Panel Machined for 4 Connectrix Mounts #PNL Panel Machined for 6 Connectrix Mounts #PNL Panel Machined for 8 Connectrix Mounts #PNL Panel Machined for 10 Connectrix Mounts #PNL Panel Machined for 12 Connectrix Mounts #PNL Panel Machined for 25 Connectrix Mounts.133 DI HOLE 2 PLCS CONNECTRIX CUTOUT.7500 STOCK CONNECTRIX LUMINUM PNELS.130R (2 PLCS) LOCTE CTR #PNL-100 #PNL-102 #PNL-103 #PNL-104 #PNL-105 #PNL #PNL-120 #PNL-124 #PNL-126 MTERIL: luminum lloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black semigloss powder coat FBRICTION: CNC Rotary Machined CONNECTRIX PNEL EXMPLE #PNL-128 #PNL-1210 #PNL-1212 #MP-101 #MP-102 #PNL-140 #PNL-1425 Custom Connectrix #PNL-106 panel with custom connectors and custom engraving including a female HD 15-Pin connector (#C-26104) utilizing break out connector positions 5 and 6. 19

20 STOCK CONNECTRIX CONNECTORS CONNECTRIX CONNECTORS UTILIZE NEUTRIK D ND SWITCHCRFT E MOUNTING PTTERNS The Connectrix system connectors may be used in any of the Connectrix panels utilizing the popular mounting pattern of the Neutrik D or Switchcraft E series mounting patterns. Connectors using the generous rectangular Connectrix cutout will add to a growing array of adapter-mounted standard connectors. The adapter mount is plastic and provides ground isolation between the panel and connector. rranged below and on page 21 is the current selection of stock Connectrix system connectors. When ordering, please specify model number and type of connector as well as panel model number (#PNL-100 Series, #PNL-120 Series, or #PNL-140 Series) the connectors will be loaded into. Connectors are loaded with black aluminum pop rivets. STOCK CONNECTRIX CONNECTORS #C #C #C #C #C #C #C Out of Stock #C #C #C #C #C #C-15113* #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C Connectrix Connector Model Numbers MODEL # DESCRIPTION #C Neutrik 3-Pin Nylon Female Connector (#NC3FPP) #C Neutrik 3 Pin Nylon Male Connector (#NC3MPP) #C Neutrik D-Series 3-Pin Locking Female Connector (#NC3FDL1-BG) #C Neutrik D-Series 3-Pin Male Panel Mount Connector (#NC3MDL1-BG) #C Neutrik 4-Pin Nylon Female Connector (#NC4FPP) #C Neutrik D-Series 4-Pin Female Connector (#NC4FDL1-BG) #C Neutrik D-Series 5-Pin Locking Female Connector (#NC5FDL1-BG) #C Neutrik D-Series 5-Pin Male Connector (#NC5MDL1) #C Neutrik RJ45-Cat5/110 IDC Panel Mount Connector (#NE8FDV-Y110) #C Neutrik 1/4 Mono Locking Phone Jack (#NJ3FP6C-BG) #C Neturik Speak-On Locking Connector (#NL4MP) #C Neutrik Blank Plug (#DB) #C-15113*... Neutrik D-Series Combo Speakon and 1/4 Panel Mount Connector (#NLJ2MDV) #C Neutrik D-Series USB to USB B Panel Mount Connector (#NUSBB) #C Neutrik D-Series Firewire 6-Pin to 6-Pin Panel Mount Connector (#N13946B) #C Neutrik D-Series 3-Pin Locking Female Connector, Gold Contacts (#NC3FDL1B) #C Neutrik D-Series 3-Pin Locking Male Connector, Gold Contacts (#NC3MDL1B) #C Neutrik D-Series 6-Pin Male Connector (#NC6MDL-1-BG) #C Neutrik 3-Pin Female Screw Terminal (#NC3FDSID) #C Neutrik 3-Pin Male Screw Terminal (#NC3MDSID) #C mm Stereo Feed Through #C BNC Isolated Solder Type #C BNC Isolated Feed Through #C CTV Isolated Solder Type #C CTV Isolated Feed Through #C RC Isolated Solder Type - Black Insulator #C RC Isolated Solder Type - Red Insulator #C RC Isolated Solder Type - Yellow Insulator #C RC Isolated Solder Type - White Insulator #C Dual RC on DB, Engraved L & R #C RC Isolated Feed Through #C RC-BNC Isolated Feed Through #C S-Video Solder Type on DB #C MIDI Isolated Solder Type #C DP/RJ11: Feed Through #C DP/RJ45: Feed Through #C DP/RJ45-CT5: Feed Through #C ICC Blank on DB #C ICC Blank with Hole on DB #C ICC BNC Feed Through on DB #C ICC CTV Feed Through on DB #C ICC MMJ Comp on DB #C ICC RJ11 Solid Wire on DB #C ICC RJ45 Solid Wire on DB #C ICC RJ45/CT3 Solid Wire on DB #C ICC RJ45/CT5 Solid Wire on DB #C ICC Fiber Optic on DB #C #11 Switchcraft on DB #C #12 Switchcraft on DB #C Rocker Switch on DB, DPDT ON-ON #C mm Stereo on DB #C Recessed BNC Feed Through #C Recessed RC to BNC #C Recessed RC Feed Through #C Recessed S-Video Feed Through #C #41 Switchcraft Mono 1/8 Isolated #C #C #C #C #C #C #C *Connector model #C is for circuit boards, no solder cups 20

21 STOCK CONNECTRIX CONNECTORS CONNECTRIX CONNECTORS UTILIZE NEUTRIK D ND SWITCHCRFT E MOUNTING PTTERNS The Connectrix system connectors may be used in any of the Connectrix panels utilizing the popular mounting pattern of the Neutrik D or Switchcraft E series mounting patterns. Connectors using the generous rectangular Connectrix cutout will add to a growing array of adapter-mounted standard connectors. rranged below and on page 20 is the current selection of stock Connectrix system connectors. When ordering, please specify model number and type of connector as well as panel model number (#PNL-100 Series, #PNL-120 Series, or #PNL-140 Series) the connectors will be loaded into. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 Connectrix Horizontal Spaces or 2 or 3 Connectrix Vertical Spaces, depending on connectors selected. Connectors are loaded with black aluminum pop rivets. STOCK CONNECTRIX DOUBLER ND TRIPLER MOUNT CONNECTORS #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C Connectrix Connector Model Numbers MODEL # DESCRIPTION #C Gender Bender, 25 Socket, Female to Female, Requires 2 Vertical Spaces* #C Gender Bender, 25 Pin, Male to Male, Requires 2 Vertical Spaces* #C Sub-D 25 Socket, Female to Solder Cups, Requires 2 Vertical Spaces* #C Sub-D 25 Pin, Male to Solder Cups, Requires 2 Vertical Spaces* #C HD 15 Socket, Female to Female, Requires 2 Horizontal Spaces* #C HD 15 Pin, Male to Male, Requires 2 Horizontal Spaces* #C HD 15 Socket, Female to Solder Cups, Requires 2 Horizontal Spaces* #C HD 15 Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 15 Socket, Female to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 15 Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C Gender Bender, 9 Socket, Female to Female, Requires 2 Horizontal Spaces* #C Gender Bender, 9 Pin, Male to Male, Requires 2 Horizontal Spaces* #C Sub-D 9 Socket, Female to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 9 Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C HD 15 Socket, Female to Screw Term., Requires 2 Horizontal Spaces* #C HD 15 Socket, Female to Screw Term., VG Only, Requires 2 Horizontal Spaces* #C HD 15 Pin, Male to Screw Term., Requires 2 Horizontal Spaces* #C Socket, Female to Screw Term., Requires 2 Horizontal Spaces* #C USB Coupler to B, Requires 2 Horizontal Spaces* #C Firewire Coupler Type 1 Shielded, Requires 2 Horizontal Spaces* #C HD 15 Socket, Female to Female w/ Stereo Mini Jack, Requires 2 Horizontal Spcs* #C DVI Feed Through, Female to Female, Requires 2 Horizontal Spaces* #C Gender Bender, 25 Socket, Female to Female, Requires 2 Vertical Spaces* #C Gender Bender, 25 Pin, Male to Male, Requires 2 Vertical Spaces* #C Sub-D 25 Socket, Female to Solder Cups, Requires 2 Vertical Spaces* #C Sub-D 25 Pin, Male to Solder Cups, Requires 2 Vertical Spaces* #C Gender Bender, HD 15 Socket, Female to Female, Requires 2 Horizontal Spaces* #C Gender Bender, HD 15 Pin, Male to Male, Requires 2 Horizontal Spaces* #C HD 15 Socket, Female to Solder Cups, Requires 2 Horizontal Spaces* #C HD 15 Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 15 Sockets, Female to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 15 Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C Gender Bender, 9 Socket, Female to Female, Requires 2 Horizontal Spaces* #C Gender Bender, 9 Pin, Male to Male, Requires 2 Horizontal Spaces* #C Sub-D 9 Socket, Female to Solder Cups, Requires 2 Horizontal Spaces* #C Sub-D 9 Pin, Male to Solder Cups, Requires 2 Horizontal Spaces* #C HD 15 Socket, Female to Screw Term., Requires 2 Horizontal Spaces* #C HD 15 Socket, Female to Screw Term., VG Only, Requires 2 Horizontal Spaces* #C HD 15 Pin, Male to Screw Term., Requires 2 Horizontal Spaces* #C Socket, Female to Screw Term., Requires 2 Horizontal Spaces* #C (5) BNC Solder Cups on Tripler, Requires 3 Horizontal Spaces* #C (5) BNC Feed Through on Tripler, Requires 3 Horizontal Spaces* #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C

22 STOCK CUSTOM PNEL CONNECTORS STOCK CUSTOM PNEL CONNECTORS ce s Stock Custom Panel Connectors may be mounted on any custom panel using our panel fabrication and engraving facilities. ll of our Stock Custom Panel Connectors will require a Custom CNC Rotary Machined Cutout (i.e. custom cut panel) which will require a longer lead time. Call the ce Custom Order Desk at for more information on our stock custom panel connectors, custom panels, mounting requirements, and turnaround times. STOCK CUSTOM PNEL CONNECTORS (NEUTRIK and SWITCHCRFT) #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C-30104* #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C-90122* #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C #C Custom Panel Connector Model Numbers MODEL # DESCRIPTION #C Neutrik 3-Pin Nylon Female Connector (#NC3FPP) #C Neutrik 3 Pin Nylon Male Connector (#NC3MPP) #C Neutrik D-Series 3-Pin Locking Female Connector (#NC3FDL1-BG) #C Neutrik D-Series 3-Pin Male Panel Mount Connector (#NC3MDL1-BG) #C Neutrik 4-Pin Nylon Female Connector (#NC4FPP) #C Neutrik D-Series 4-Pin Female Connector (#NC4FDL1-BG) #C Neutrik D-Series 5-Pin Locking Female Connector (#NC5FDL1-BG) #C Neutrik D-Series 5-Pin Male Connector (#NC5MDL1) #C Neutrik Combo Female XLR & 1/4 Panel Mount Connector (#NCJ6FI-S) #C Neutrik RJ45-Cat5/110 IDC Panel Mount Connector (#NE8FDV-Y110) #C Neutrik 1/4 Mono Locking Phone Jack (#NJ3FP6C-BG) #C Neturik Speak-On Locking Connector (#NL4MP) #C Neutrik Blank Plug (#DB) #C Neutrik D-Series Combo Speakon & 1/4 Panel Mount Connector (#NLJ2MDV) #C Neutrik D-Series USB to USB B Panel Mount Connector (#NUSBB) #C Neutrik D-Series Firewire 6-Pin to 6-Pin Panel Mount Connector (#N13946B) #C Switchcraft 3-Pin Locking Female Connector (#D3F) #C Switchcraft 3 Pin Locking Male Connector (#D3M) #C Switchcraft 4-Pin Panel Mount Female Connector (#D4F) #C Switchcraft 4-Pin Panel Mount Male Connector (#D4M) #C Switchcraft 5-Pin Panel Mount Female Connector (#D5F) #C Switchcraft 5-Pin Panel Mount Male Connector (#D5M) #C Switchcraft 6-Pin Panel Mount Female Connector (#D6F) #C Switchcraft 6-Pin Panel Mount Male Connector (#D6M) #C Switchcraft 1/4 Mono Phone Jack (#11) #C Switchcraft 1/4 Stereo Phone Jack (#12) #C Switchcraft 1/8 Mini Jack (#41) #C Plug Blank #C Plug Blank with Hole #C BNC Feed Through Female to Female #C F CTV Feed Through Female to Female #C Trim Bezel in Biege #C Trim Bezel in Black #C Trim Bezel in Blue #C Trim Bezel in Green #C Trim Bezel in Red #C Trim Bezel in White #C Trim Bezel in Yellow #C MMJ Computer Module #C RJ11 Solid Wire Voice/Data #C RJ11 Feed Through #C RJ45 Solid Wire UnKeyed Voice/Data #C RJ45 CT 3 UnKeyed Solid Wire #C RJ45 CT 5 High Speed Solid Wire #C RJ45 CT 5 Feed Through #C Fiber Optic Feed Through #C Gender Bender, 25 Socket, Female to Female #C Gender Bender, 25 Pin, Male to Male #C Sub D Panel Mount 25 Sockets #C Sub D Panel Mount 25 Pin #C Gender Bender, 15 Socket, Female to Female #C Gender Bender, 15 Pin, Male to Male #C High Density Panel Mount 15 Sockets #C High Density Panel Mount 15 Pin #C Sub D Panel Mount 15 Sockets #C Sub D Panel Mount 15 Pin #C Gender Bender, 9 Socket, Female to Female #C Gender Bender, 9 Pin, Male to Male #C Sub D Panel Mount 9 Sockets #C Sub D Panel Mount 9 Pin #C High Density Panel Mount, 15 Socket, Female Screw Term. #C High Density Panel Mount, 15 Pin, Female Screw Term. #C High Density Panel Mount, 15 Pin, Male Screw Term. #C DB9, 9 Pin, Female Screw Term. #C BNC Solder Type & Hardware - 75 ohm #C BNC Feed Through & Hardware - 75 ohm #C BNC Solder Type, Isolated, & Hardware - 50 ohm #C RC to BNC Feed Through Connector #C RC Solder Term. (Black Insulator Ring) #C RC Solder Term. (Red Insulator Ring) #C RC Solder Term. (White Insulator Ring) #C RC Solder Term. (Yellow Insulator Ring) #C RC Feed Through Connector #C Dual Banana Jack Panel Mount #C CTV Solder Term Connector & Hardware #C CTV Feed Through Connector & Hardware #C Midi 5-Pin Solder Type Connector, Screw Term. #C Midi 5-Pin Solder Type Connector, Rivet Holes #C S-Video Screw Term. Connector #C S-Video Feed Through Connector #C mm Stereo Panel Mount Solder Type Jack #C mm Stereo Panel Mount Female to Female Feed Through #C Edison Snap in Single Receptacle w/ Heavy Wire Leads #C RC-Dual Isolated Solder Term. (Red/Black) #C Rocker Switch #C S-Video Panel Mount Solder Type #C Recessed D Cut Panel Mount, Blank #C S-Video Feed Through Connector #C BNC Solder Type Isolated w/ Hardware - 75 ohm #C BNC Feed Through Isolated w/ Hardware - 75 ohm #C USB Coupler to B Panel Mount #C Firewire Coupler Type 1 Shielded Panel Mount #C DVI Feed Through Female to Female Panel Mount dapter 22

23 SWITCHCRFT PNELS SWITCHCRFT LUMINUM PNELS The machined Switchcraft style cutouts use the popular mounting pattern of the Switchcraft D series connectors made with a precise, CNC cutout that mates perfectly. Standard Switchcraft Panels (#PSW-102, #PSW-103, #PSW-104, #PSW-105, #PSW-106) are created from high strength aluminum alloy (6061-T6) that is.062 or.125 thick. Each standard Switchcraft panel is finished with electro-static applied, oven-cured black semi-gloss powder coat. Engraving the Switchcraft panel is fast and easily accomplished STOCK SWITCHCRFT LUMINUM PNELS on a separate dedicated CNC engraving machine. The finished Switchcraft panels show bright aluminum in the engraved characters and need not be back filled. CE Switchcraft panels are flat, strong, and rigid like the typical thinner mild steel panels. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. ll CE Switchcraft panels will mount separately or in combination in Half, Full, Double Wide, Super, and Super Double Wide Pockets. Switchcraft Panel Model Numbers MODEL # DESCRIPTION #PSW Panel Machined for 2 Switchcraft Mounts (4-1/2 H x 3-11/16 W) #PSW Panel Machined for 3 Switchcraft Mounts (4-1/2 H x 3-11/16 W) #PSW Panel Machined for 4 Switchcraft Mounts (4-1/2 H x 3-11/16 W) #PSW Panel Machined for 5 Switchcraft Mounts (4-1/2 H x 3-11/16 W) #PSW Panel Machined for 6 Switchcraft Mounts (4-1/2 H x 3-11/16 W) SWITCHCRFT PNEL TEMPLTE #PSW-100 BLNK #PSW-102 #PSW-103 #PSW-104 #PSW-105 #PSW SWITCHCRFT PNEL ENGRVING SPECIFICTIONS ce s Switchcraft Panel Engraving Specifications are as follows: Character Height Maximum: 1/8 (9 point type) Font: Single Stroke Stick Character Text Font lignment: Centered above component in the top row and as space permits below component in the bottom row Number of Characters: 8 (including spaces) Panel Materials ce will engrave: crylic Sheet, luminum, Plastic Laminants Backfill Characters: Optional extra using enamel or acrylic paint Connector Loading: Black aluminum pop rivets SWITCHCRFT PNEL CONNECTOR LODING ND ENGRVING The Standard Blank Switchcraft Panel Template has 6 positions that mark the standard connector centers for either Connectrix and/or Switchcraft connector layouts. Using a drill and chassis punch, panels may easily be punched in the field to satisfy on site custom connector panel configurations. When ordering, please specify the type and model number of the connector, the type and model number of the Pocket Panel, and the type and model number of the Stage Pocket the specified Switchcraft panels will be loaded into SWITCHCRFT PNEL MOUNT SPECIFICTIONS.130 DI HOLE 2 PLCES DI HOLE DI HOLE (4) PLCES PNEL MTERIL SPECIFICTIONS MTERIL: luminum lloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black semi-gloss powder coat FBRICTION: CNC Rotary Machined, Engraved SWITCHCRFT PNEL EXMPLE SWITCHCRFT PNEL CONNECTOR LODING ND ENGRVING FORMS Pocket Model # Pocket Model # Panel Model # Panel Model # Connector Model # Engraved Text Connector Model # Engraved Text #1 #2 #3 #1 #2 #3 Custom Switchcraft #PSW-106 panel with (6) #C Switchcraft 3-pin locking female connectors (#D3F) and custom engraving above and below connectors. #4 #5 #6 #4 #5 #6 Check Out for more information! 23

24 ELECTRICL POCKET PNELS ND CCESSORIES STNDRD ELECTRICL PNELS ND SWITCH BOXES Standard 110VC connections in CE pockets issue. Consult your local building codes for any is easy using compliant switch boxes and plate specific application. Each assembly is complete assemblies. The #PE (single gang box) and the with duplex or triple duplex switch box, black #FP3E (three gang box) provide for one or three powder-coated steel mounting plate, and a narrow standard duplex outlets, respectively. These items aluminum and/or steel black powder-coated cover are UL listed in conjunction with UL listed CE plate with mounting screws. The #PE and #FP3E pockets. When properly installed with isolating will install in any pocket that accepts a standard C wiring conduit, combining low voltage type #PNL-100 or #PNL-120 plate, respectively. connections in the same pocket should not be an #FP3E ELECTRICL PNEL EXPLODED VIEW #FP3E & #PE ELECTRICL PNELS Electrical Panels & ccessory Model Numbers MODEL # DESCRIPTION #025BBX/C...Mini Pocket Back Box with 110VC divider #/C ISO KIT...1/2 Conduit.C. Electrical Isolation Kit #DB...Steel Duplex Cover Panel, Punched for Narrow Single Gang in Super Pocket #DC...Steel Duplex Cover Panel, Solid for Narrow Single Gang in Super Pocket #FP3E...Triple Duplex Switch Box, Steel Mounting Panel, luminum Narrow Triple Duplex Cover #MP Mini Pocket Panel with Edison Snap-In Receptacle and heavy wire leads #PE...Duplex Switch Box, Steel Mounting Panel, luminum Narrow Duplex Cover #PE Single Gang Duplex Switch Box with Steel Mounting Panel and Steel Narrow Duplex Cover* TYPICL SSEMBLY SWITCH BOX TO STEEL PNEL B Typical assembly of a #FP3E Electrical Panel includes: ) 1 - Triple Gang Duplex Switch Box B) 1 - Steel Mounting Panel with black powder coat C) 3-3-Wire Grounding Duplex Outlets (not included) D) 1 - luminum Narrow Triple Duplex Cover with black powder coat This Electrical Panel will fit the Full, Double Wide, and Super Double Wide Pockets. *Duplex Outlets NOT included. MINI POCKET ELECTRICL PNELS ND BCK BOXES WITH C DIVIDER The #025 MINI POCKET has an added capacity for a single Edison C outlet. The outlet is a 125VC, 15 mp polarized, snap-in type with heavy 6 wire leads and CS/UL listings. It snaps into a #MP-113 center mount or #MP-114 left/right mount Mini Pocket Plate. These plates, in turn, mount into the #025 MINI POCKET which installs in the UL listed #025BBX Back Box (RCO 697) assuming no other low voltage connections are made in the same pocket. Use the #025BBX/C divider back box to isolate C and low voltage sections when C and low voltage connections are in the same pocket. Consult your local building codes for any specific application. Top view of an installed #025BK Mini Stage Pocket with a black powder coat finish and a #MP-113 Electrical panel installed. C D #FP3E Triple Gang Duplex Switch Box with Steel Mounti n g P a n e l a n d l u m i n u m N a r - row Triple Duplex Cover* () 1 - #025BK Mini Pocket Trim/Bezel Lid ssembly (B) 1 - #MP-113 Mini Pocket Electrical Panel w/ C outlet (B) 1 - #MP-102 Mini Pocket Panel w/ 2 Connectors (C) 1 - #025BK Mini Pocket Body (D) 1 - #025BBX/C Mini Pocket Back Box w/ C Divider (E) 8 - Self Tapping Sheet Metal/Wood Screws (F) 4 - Machine Screws (for Mounting w/ Back Box) B MINI POCKET W/ OPTIONL ELECTRICL CCESSORIES E F B C D NRROW STEEL COVER PLTE (REF RCO #8864) EDISON DUPLEX OUTLET (NOT PROVIDED) STEEL #PE MOUNTING PNEL UL LISTED SWITCH BOX (PROVIDED) SWITCH BOX MOUNTS ON #PE PNEL /C ELECTRIC ISOLTION KIT.C. and low voltage wiring must be isolated from each other in Stage Floor Pockets installed in back boxes (BBX) which include both low voltage terminations and #PE panel(s) for.c. connections. This kit provides the UL Listed conduit parts for isolated routing of the.c. wires inside the back box, and is suitable for use in Full and Double Wide Back Boxes..C. wiring and terminations should be done only by a qualified electrician. Top view of an #/C ISO KIT installed in a #102BBX Back Box without () and with (B) the Full Stage Pocket Body. UL Listed in conjunction with UL Listed CE Stage Pockets #/C ISO KIT - 1/2 Conduit.C. Electrical Isolation Kit Includes: - (1) #RCO Non-Metallic Extra-Flex Conduit B - (1) #RCO º Swivel Connector C - (1) #RCO Straight Connector D - (1) #GRC COUPLING...Coupling, Female-to-Female B B C D 24

25 CONNECTRIX RCK PNELS STOCK CONNECTRIX LUMINUM RCK PNELS The Connectrix system expands connectivity electro-static applied, oven cured black simi-gloss possibilities utilizing a new panel cutout detail and powder coat. Engraving the standard blank is fast an array of standard and new isolated connectors. and easily accomplished on a separate dedicated This system provides more connectors and mounting options in stock standard CE panels. The panels show bright aluminum in the engraved CNC engraving routing machine. The finished benefit is faster order turn around and lower cost. characters and need not be back filled. Less custom fabrication for custom spec results The Connectrix system connectors combine with off-the-shelf stock prices. popular mounting pattern of the Neurtrik D The Connectrix system rack panels are flat and series and Switchcraft E series connectors with strong. Made from high strength aluminum alloy a generous rectangular cutout that mates with (6061-T6) that is.125 thick, they are ridged like a growing array of adapter-mounted standard the typical thinner mild steel panels. Because they connectors. The adapter mount is plastic and are CNC rotary machined and not punched they provides ground isolation between the panel and stay flat and undistorted unlike punched panels connector. On the connectrix system panel it is which distort in the punching process. These possible to mount any combination of modular panels are made and stocked in an assortment of jacks (RJ45, RJ11 etc.), BNCs, dual RCs, mic standard 19 rack panels. jacks, speaker jacks and numerous other standard The Connectrix system panels are easily engraved. The strong flat aluminum system panels Pages 20-21). Connectors are loaded with black connectors without a single custom punch (See are cut in array of different connector layout aluminum pop rivets. patterns. Each standard blank is finished with Connectrix Rack Panel Model Numbers MODEL # DESCRIPTION #RPL Single Space Rack Mount Panel, Blank - 19 W x 1-3/4 H #RPL Single Space Rack Mount Panel Machined for 10 Connectrix Mounts #RPL Two Space Rack Mount Panel, Blank - 19 W x 3-1/2 H #RPL Two Space Rack Mount Panel Machined for 30 Connectrix Mounts #RPL Three Space Rack Mount Panel, Blank - 19 W x 5-1/4 H #RPL Three Space Rack Mount Panel Machined for 45 Connectrix Mounts.133 DI HOLE 2 PLCS CONNECTRIX CUTOUT R (2 PLCS) LOCTE CTR STOCK CONNECTRIX LUMINUM RCK PNEL SPECIFICTIONS 19.00" #RPL ".800" ".75" 1.50" 1.50" 1.50" 1.50" 1.50" 1.50" 1.50" 1.50" 2.75" 2.75" 9.50" 19.00" #RPL-230 MTERIL: luminum lloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black semigloss powder coat FBRICTION: CNC Rotary Machined, Engraved CONNECTRIX RCK PNEL 3.50" 1.625".800" " 1.66" 9.50" #RPL " 5.25" 1.625" Custom Connectrix #RPL-345 Rack Panel fully populated with custom Connectrix connectors and custom engraving. Call for more info on our custom Rack Panels ".800" " 1.66" 9.50" See page 36 for Pocket Panel Connector Loading & Engraving Form See page 37 for Rack Panel Connector Loading & Engraving Form See page 38 for Wall Panel Connector Loading & Engraving Form STOCK CONNECTRIX LUMINUM RCK PNEL POSITION REFERENCE NUMBERS MIC-1 MIC-9 MIC-1 MIC-9 MIC-1 MIC-2 MIC-3 MIC-4 MIC-5 MIC-2 MIC-3 MIC-4 MIC-5 MIC-6 MIC-7 MIC-8 MIC-10 MIC-11 MIC-12 MIC-13 MIC-14 MIC-15 MIC-16 MIC-2 MIC-3 MIC-4 MIC-5 MIC-6 MIC-7 MIC-8 MIC-10 MIC-11 MIC-12 MIC-13 MIC-14 MIC-15 MIC-16 MIC-6 MIC-7 MIC-8 UX-1 UX-2 UX-3 UX-4 SEND-1 SEND-2 SEND-3 SEND-4 TIE UX-1 UX-2 UX-3 UX-4 SEND-1 SEND-2 SEND-3 SEND-4 TIE UX-1 UX-2 TIE TIE TIE TIE TIE TIE TIE TIE Stock aluminum #RPL-100, #RPL-200, and #RPL- 300 Series Rack Panels are CNC rotary machined to hold 10, 30, and 45 Connectrix connectors. These panels are excellent switching panels when populated with #C Rocker Switches (see page 22). Position reference numbers 1-10, 1-30, and 1-45 identify standard CNC rotary machined positions. MIC-9 MIC-17 MIC-18 MIC-19 MIC-20 MIC-21 MIC-22 MIC-23 MIC-24 SEND-5 SEND-6 SEND-7 SEND-8 TIE TIE TIE #RPL-110, #RPL-230 and #RPL-345 illustrated with Position Reference Numbers #RPL-110, #RPL-230 and #RPL-345 illustrated with Connectrix connectors installed and custom engraving 25

26 CONNECTRIX WLL PNELS STOCK CONNECTRIX LUMINUM WLL PNELS The Connectrix system expands connectivity nectrix system wall panels are easily engraved. possibilities utilizing a new panel cutout detail The strong flat aluminum system panels are cut and an array of standard and new isolated connectors. This system provides more connectors and Each standard blank is finished with electro-static in array of different connector layout patterns. mounting options in stock standard CE panels. applied, oven cured black or white simi-gloss The benefit is faster order turn around and lower powder coat. Engraving the standard blank is fast cost. Less custom fabrication with custom spec and easily accomplished on a separate dedicated results for off-the-shelf stock prices. CNC engraving routing machine. Each wall panel The Connectrix system wall panels are flat is supplied with #6 screws. Optional connector and strong. Made from high strength aluminum loading and engraving is available, see pages alloy (6061-T6) that is.062 thick. The Con- and 27 for details. STOCK CONNECTRIX LUMINUM WLL PNELS #WP-100 #WP-200 #WP-300 #WP-400 #WP-101 #WP-204 #WP-306 #WP-408 Connectrix Wall Panel Model Numbers MODEL # DESCRIPTION Stock Connectrix luminum Wall Panels, Black Finish #WP Single Gang Wall Panel Blank, 4-1/2 H x 2-3/4 W #WP Double Gang Wall Panel Blank, 4-1/2 H x 4-9/16 W #WP Triple Gang Wall Panel Blank, 4-1/2 H x 6-3/8 W #WP Four Gang Wall Panel Blank, 4-1/2 H x 8-3/16 W #WP Six Gang Wall Panel Blank, 4-1/2 H x 11-13/16 W #WP Single Gang Wall Panel Machined 1 Connectrix Cutout #WP Single Gang Wall Panel Machined 2 Connectrix Cutouts #WP Double Gang Wall Panel Machined 4 Connectrix Cutouts #WP Double Gang Wall Panel Machined 6 Connectrix Cutouts #WP Triple Gang Wall Panel Machined 6 Connectrix Cutouts #WP Triple Gang Wall Panel Machined 8 Connectrix Cutouts #WP Four Gang Wall Panel Machined 8 Connectrix Cutouts #WP Four Gang Wall Panel Machined 12 Connectrix Cutouts #WP Six Gang Wall Panel Machined 12 Connectrix Cutouts #WP Six Gang Wall Panel Machined 16 Connectrix Cutouts Stock Connectrix luminum Wall Panels, White Finish #WP Single Gang Wall Panel Blank, 4-1/2 H x 2-3/4 W #WP Double Gang Wall Panel Blank, 4-1/2 H x 4-9/16 W #WP Triple Gang Wall Panel Blank, 4-1/2 H x 6-3/8 W #WP Four Gang Wall Panel Blank, 4-1/2 H x 8-3/16 W #WP Six Gang Wall Panel Blank, 4-1/2 H x 11-13/16 W #WP Single Gang Wall Panel Machined 1 Connectrix Cutout #WP Single Gang Wall Panel Machined 2 Connectrix Cutouts #WP Double Gang Wall Panel Machined 4 Connectrix Cutouts #WP Double Gang Wall Panel Machined 6 Connectrix Cutouts #WP Triple Gang Wall Panel Machined 6 Connectrix Cutouts #WP Triple Gang Wall Panel Machined 8 Connectrix Cutouts #WP Four Gang Wall Panel Machined 8 Connectrix Cutouts #WP Four Gang Wall Panel Machined 12 Connectrix Cutouts #WP Six Gang Wall Panel Machined 12 Connectrix Cutouts #WP Six Gang Wall Panel Machined 16 Connectrix Cutouts WLL PNEL EXMPLE #WP-102 #WP-206 #WP-308 #WP-4012 #WP-600 #WP-6012 #WP-6016 MTERIL: luminum lloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black or white semi-gloss powder coat FBRICTION: CNC Rotary Machined, Engraved See Page 35 for a Wall Panel Connector Loading & Engraving Form Custom Connectrix #WP-318 Wall Panel with white powder coat finish, custom engraving, and custom connectors including a female HD 15-Pin connector (#C-26104) utilizing break out connector positions 7 and 8. STOCK STEEL WLL BOXES Wall Boxes made from.074 (1/16 ) thick steel and finished with a gray, heat-set enamel. Standard Electrical Conduit combination knock-outs located on all 4 sides. Note: Custom wall panels are available. Wall Boxes at right DO NOT accommodate the Wall Panels listed above. WLL BOXES #WB8x8x4 #WB10x10x4 #WB12x12x4 Wall Box Model Numbers MODEL # DESCRIPTION luminum Wall Boxes, Gray Finish #WB8x8x4...Wall Box w/ Knockouts - 08 W x 08 L x 4 D #WB10x10x4...Wall Box w/ Knockouts - 10 W x 10 L x 4 D #WB12x12x4...Wall Box w/ Knockouts - 12 W x 12 L x 4 D MTERIL: 14 Gauge Sheet Steel,.074 (1/16 ) thick FINISH: Sprayed on heat-set gray enamel FBRICTION: Precision die formed and welded 26

27 CONNECTRIX PNEL LODING ND ENGRVING CUSTOM CONNECTRIX PNEL CONNECTOR LODING ND ENGRVING The Standard Blank Connectrix Panel Template fashion. When ordering, please be sure to include has 6 positions that mark the standard connector the model number of the Connector, the centers for either Connectrix and/or Switchcraft type and model number of the Pocket Panel, connector layouts. Using the example and the type and model number of the Stage illustrated at right, custom Connectrix connector Pocket the specified Connectrix panels will panels may be easily designed and produced, be loaded into. allowing the panels to be shipped in a timely CONNECTRIX PNEL ENGRVING SPECIFICTIONS ce s Connectrix Panel Engraving Specifications are as follows: Character Height Maximum: 1/8 (9 point type) Font: Single Stroke Stick Character Text Font lignment: Centered above component Number of Characters: 8 (including spaces) Panel Materials ce will engrave: crylic Sheet, luminum, Plastic Laminants Backfill Characters: Optional extra using enamel or acrylic paint Connector Loading: Black aluminum pop rivets CONNECTRIX PNEL CONNECTOR LODING ND ENGRVING EXMPLE Custom Connectrix #PNL-106 panel with (6) #C connectors and custom engraving. The above form should be filled out completely to avoid any delays in custom panel designs. #MP-100 SERIES MINI POCKET CONNECTRIX PNELS Stock #MP-100 Series Mini Pocket Panels can be customed machined to hold 1 or 2 Connectrix connectors. Position reference numbers 1 and 2 identify standard machined positions. #MP-102 #PNL-100 SERIES HLF POCKET CONNECTRIX PNELS Stock #PNL-100 Series Half Pocket Panels can be customed machined to hold 1 to 6 Connectrix connectors. Position reference numbers 1 through 6 identify standard machined positions. #PNL Pocket Model # #123SLBK Panel Model # #PNL-106 Connector Model # Engraved Text #1 #C #1 MIC 19 #2 #C #2 MIC 20 #3 #C #3 MIC 21 #4 #C #4 MIC 22 #5 #C #5 MIC 23 #6 #C #6 MIC 24 #PNL-120 SERIES FULL POCKET CONNECTRIX PNELS Stock #PNL-120 Series Full Pocket Panels can be customed machined to hold 1 to 12 Connectrix connectors. Position reference numbers 1 through 12 identify standard machined positions. #PNL CONNECTRIX PNEL TEMPLTE #PNL-140 SERIES SUPER POCKET CONNECTRIX PNELS Stock #PNL-140 Series Super Pocket Panels can be customed machined to hold 1 to 25 Connectrix connectors. Position reference numbers 1 through 25 identify standard machined positions. Note: Super Pocket center Break- Out bar must be removed to use #PNL-1425 panel (see page 18). #PNL DI HOLE (4) PLCES PNEL MTERIL SPECIFICTIONS MTERIL: luminum lloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick FINISH: Electro-static applied oven-cured black semi-gloss powder coat FBRICTION: CNC Rotary Machined, Engraved 27

28 POCKET PNEL CONNECTOR LODING & ENGRVING FORM #025 MINI POCKET MODEL #: #MP-100 SERIES PNEL MODEL #(S): #MP-100 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #123 HLF POCKET MODEL #(S): #PNL-100 SERIES PNEL MODEL #(S): #PNL-100 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #122 FULL POCKET MODEL #(S): #PNL-100/120 SERIES PNEL MODEL #(S): #PNL-100/120 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #124 DOUBLE WIDE POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE C CONNECTOR ENGRVE B CONNECTOR ENGRVE D CONNECTOR ENGRVE #132 SUPER POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE C CONNECTOR ENGRVE B CONNECTOR ENGRVE D CONNECTOR ENGRVE #134 SUPER DOUBLE WIDE POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE E CONNECTOR ENGRVE B CONNECTOR ENGRVE F CONNECTOR ENGRVE C CONNECTOR ENGRVE G CONNECTOR ENGRVE D CONNECTOR ENGRVE H CONNECTOR ENVGRVE

29 CUSTOM PNEL MTERILS ND SPECIFICTIONS CUSTOM PNEL MTERILS ND SPECIFICTIONS Made to order Custom Panels may be created from crylic, luminum, and Plastic Laminate materials. Custom Panels are available in sizes up to 24 W x 36 L with multi-panel ganged machined operations providing scaled economies and the lowest panel cost. CE can provide a complete professional finished panel resource for all your custom panel design installation needs. Call the ce Custom Order Desk at for more detailed panel information and specifications or custom@acebackstage.com. CNC ROTRY PNEL ROUTING MCHINE CRYLIC SHEET crylic sheet stock is an excellent panel material. t 3/16 thick it is very flat and ridged, ideal for mounting large multi-pin connectors that require a heavy push/pull for engagement. It provides electrical isolation for connectors with grounded shells typical of many audio and video applications. This acrylic has a glossy black finish which is easily engraved and back filled with white acrylic paint for an up scale hi-tech appearance. lternately, use the acrylic panel as a sub-panel and engrave a plastic laminant over lay panel for nomenclature call outs. LUMINUM LLOY SHEET luminum alloy sheet stock can be cut, black powder coated and engraved for almost any panel requirement. This alloy (6061-T6) is very ridged and flat. Stocked in 1/16 and 1/8 thickness. Smaller panels are typically made from 1/16 aluminum. Larger panels (e.g. rack panels) are cut from 1/8 aluminum. Other thickness are available on a custom order basis. Currently the connectrix system pocket panels, rack panels, and wall panels are fabricated from this tough aluminum alloy (see pgs 20 & 25). ce Backstage Co., Inc. s CNC Rotary Panel Routing machine can produce custom cut panels from a number of different materials, including acrylic, aluminum, and plastic laminate sheets. This router can machine custom panels from 1/16 and 1/8 thick aluminum. INSET: CE s CNC Rotary Panel Engraving machine can engrave on acrylic, aluminum, and plastic laminate sheets. Backfill characters are optional and extra using enamel or acrylic paint. CRYLIC ND PLSTIC LMINTE OVERLY PNEL EXMPLE PLSTIC LMINNT SHEET Plastic Laminant sheet stock is used for engraved over lay panel. This material is 1/16 thick and provides an opaque engraveable laminated surface over a contrasting sub-surface (e.g. black over white). For example, when using a standard high density cutout panel, (connectrix #PNL1425, pg. 22) where some cutouts are not populated, an over lay panel can be cut and engraved showing only the positions used and covering unused positions. Many colors and combinations of front and reverse engraveable stock are available on request. Other uses include signs, operating instructions, block diagrams etc. for a permanent professional presentation on any project. B C In this custom example the Plastic Laminate Overlay Panel () is routed and engraved to match the crylic Sub Panel (B) which is loaded with custom audio, data, electrical, and video connectors. The crylic Sub Panel provides electrical isolation for connectors with grounded shells. The 2 panels are then combined (C) and are ready for installation and wiring. PLSTIC LMINNT ENGRVING SECOND LYER (TEXT COLOR) ENGRVED RE CRYLIC SIZE(S) MTERIL: crylic Sheet,.1875 (3/16 ) Thick LUMINUM SIZE(S) MTERIL: luminum lloy Sheet (6061-T6),.062 (1/16 ) or.125 (1/8 ) Thick PLSTIC LMINTE SIZE(S) SURFCE COLOR MTERIL: Plastic Laminate Sheet,.062 (1/16 ) Thick 29

30 CUSTOM SPEC PNEL FBRICTION ND ENGRVING CUSTOM SPEC PNEL FBRICTION ND ENGRVING FCILITIES Your panel will be made to the exact agreed specification and delivered on time. Panels are precision cut and engraved to your exact specifications from a variety of materials on precision CNC rotary cutting machines. Computer ssisted Drafting (CD) systems feed data to the machines that define your panel cuts accurate ±.001. Panels and parts with identical material requirements are ganged together into a single production run. crylic, aluminum, and plastic laminate material panels are completely cut and engraved in the single set-up and production run for the fastest turn around time possible. The luminum panels, after cutting, are prepared for powder coating and thereafter sent to the engraving router. Lead times are generally much shorter for acrylic and plastic laminate because they are completed in the single fabrication event, and no further surface finishing is required. luminum requires additional time to powder coat and engrave. Cut, engraved, back filled and painted panel blanks are sent to the assembly bench and populated with the specified connectors, switches, nutserts etc. The final completed panel is carefully inspected and checked twice before packaging for shipment. CUSTOM ENGRVING ND SSEMBLY SPECIFICTIONS Unless otherwise specified ce s Standard Panel Engraving and ssembly specifications are as follows: Character Height Maximum: 1/8 (9 point type) Font: Single Stroke Stick Character Text Font lignment: Centered above component Number of Characters: 8 (including spaces) Panel Materials ce will engrave: crylic, luminum, Plastic Laminants Backfill Characters: Optional extra using enamel or acrylic paint Connector Install: Black aluminum pop rivets, nutcerts with screws optional extra Panel Install: Black self tapping sheet metal/wood screws CUSTOM ENGRVED ND POPULTED WLL PNELS #WP-300 CUSTOM WLL PNEL #WP-214 CUSTOM CONNECTRIX WLL PNEL CUSTOM ENGRVED ND POPULTED CONNECTRIX POCKET PNELS CNC PNEL ROUTER #PNL-106 CUSTOM CONNECTRIX POCKET PNEL #PNL-1212 CUSTOM CONNECTRIX POCKET PNEL CUSTOM ENGRVED ND POPULTED CONNECTRIX POCKET & RCK PNELS CNC PNEL ENGRVER #PNL-1425 CUSTOM CONNECTRIX POCKET PNEL #RPL-345 CUSTOM CONNECTRIX RCK PNEL 30

31 CUSTOM SPEC POCKET FBRICTION CUSTOM SPEC POCKET FBRICTION FCILITIES Services available from ce Backstage Co., Inc. pocket from the ground up to meet your specified include Custom Spec Pocket Fabrication. In addition requirements. From conceptual planning to to our Standard and Super Pockets, ce can creation, ce can build you a custom pocket that develop custom pockets by utilizing our library of will meet all your design expectations. Call the standard components and pocket bodies to design CE CUSTOM DESK at for more and create pockets that will fit your specific application. detailed information or us at custom@ace- Or you can have ce create a custom backstage.com for custom quotes and questions. CUSTOM SPEC PPLICTION LID FBRICTION Custom Lids from ce Backstage Co. can be designed to meet your custom application requirements. ce can produce the following custom lids: ) Custom Keyed Locking Lids, B) Custom Sized Lids, and C) Custom Slot Closure Lids. (See below) CUSTOM STGE POCKET PRODUCTION EXMPLE B C ) Custom crylic and Plastic Laminate Panel with connectors B) Custom Horizontal Panel Double Wide Double Deep Pocket C) Double Wide Double Deep Pocket with Custom Panel installed D E F D) Stock Double Wide Trim Bezel Lid ssembly fits Custom Pocket E) Custom Pocket w/ Panel and Trim Bezel Lid ssembly installed F) Final view of Custom Pocket with closed Trim Bezel Lid CUSTOM KEYED LOCKING LIDS Three different types of keyed locks with trim bezels are available for CE Vertical Slant and Horizontal Panel Pockets (Note: No Carpet Locking Lids or Mini Pocket Locking Lids): ) Lock (S): Standard Flat Head Screw-driver Lock (key not included). B) Lock (H): Standard 5/32 llen Key Wrench (key included). C) Lock (K): Tubular Butterfly Key Lock (key included). B C CUSTOM SPEC SIZED LIDS Lids can be designed to fit your application. This lid has the length of a Super Double Wide Pocket but half the width. Custom Lids are designed for ce Pockets only. Call for more info on your custom ce Stage Pocket Lids. Custom application Stainless Steel Trim Bezel Lid ssembly for step riser CUSTOM SLOT CLOSURE LIDS The Full Pocket below illustrates how a standard 3/8 cable way slot may be custom designed to meet your specified measurements. The X in the example shows how the cable way slot may be reduced or enlarged to create a custom designed pocket lid. Custom slot closure lids apply to Standard Lids only. 10-1/2 Square Custom application Full Pocket Lid with (2) keyed locks and an ntique Silvervein finish Custom application Trim Bezel Lid ssembly with extra large cable way U slot and extra wide Trim Bezel X = Custom Slot Closure Size X 31

32 STGE MNGEMENT PRODUCTS - CHOIR STICK MICS #CSM-40 ND #CSM-60 CHOIR STICK MICROPHONES The CSM-60 and CSM-40 Choir Stick Microphone mounts on any standard microphone stand with any offers the ultimate performance of an standard taper-body mic stand clip. It is extremely overhead hanging choir mic in a totally portable stable and will not easily tip over. Five pick-up configuration. The low profile, light weight, black, pattern choices mean one will be right for your aluminum, space age alloy Stick mic is available needs. Use the CSM-40 or CSM-60 Choir Stick in both 40 and 60 models. The Boom Stick Microphone for children or adult groups on the places the microphone element ideally above and stage steps, portable risers or anywhere. over any choir. This versatile Stick microphone Choir Stick Microphone Model Numbers MODEL # DESCRIPTION #CSM-40/C...40 Long Choir Stick Mic w/ 120º Cardioid Element #CSM-40/H...40 Long Choir Stick Mic w/ 100º Hypercardioid Element #CSM-40/ML...40 Long Choir Stick Mic w/ 90º MicroLine Element #CSM-60/C...60 Long Choir Stick Mic w/ 120º Cardioid Element #CSM-60/H...60 Long Choir Stick Mic w/ 100º Hypercardioid Element #CSM-60/ML...60 Long Choir Stick Mic w/ 90º MicroLine Element #CSM-40 ND #CSM-60 CHOIR STICK MICROPHONE SPECIFICTIONS MODEL NUMBER MOUNT TYPE POLR PTTERN ELEMENT TYPE FREQUENCY RESPONSE OPEN CIRCUIT SENSITIVITY 1 MX INPUT SOUND LEVEL 2 DYNMIC RNGE 3 SIGNL-TO- NOISE RTIO 4 #CSM-40/60C Stick Mic Cardioid Fixed-charge back plate 40-20,000 Hz -42 db (7.9mV) 142 db SPL 115 db 67 db #CSM-40/60H Stick Mic Hypercardioid permanently polarized 40-20,000 Hz -42 db (7.9mV) 142 db SPL 115 db 67 db #CSM-40/60ML Stick Mic Microline condenser 30-20,000 Hz -35 db (17.7mV) 135 db SPL 109 db 68 db 1 re 1V at 1 Pa = 1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 db 2 1 khz at 1% T.H.D 3 1 khz at Max SPL 4 1 khz at 1 Pa - Typical -weighted using System 1 #CSM-40 ND #CSM-60 CHOIR STICK MICROPHONE DESCRIPTIONS The CSM-40 (40 long) and CSM-60 (60 long) Choir Stick Microphone features UDIO TECHNIC S miniature back-plate condenser elements assembled into an ultra light weight aluminum boom shaft (.312 Dia.) for long reach, high performance microphone applications. Each Stick microphone version is supplied with a Taper-Body Clutch Stand Mount and a U-U Clip ready for use with any standard microphone stand. The CSM STICK MICROPHONE is a wide range condenser microphone available with a series of interchangeable elements. It is designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup situations. The small-diameter gooseneck design permits highly flexible positioning while maintaining a smooth, well contoured appearance. The OUTPUT CONNECTION POWER MODULE for the Stick microphone is an Integral 3-pin XLRM-type, phased with PHNTOM POWER REQUIREMENTS of 9-52V dc, 2m typical and an IMPEDNCE range of 200 ohms. CHOIR STICK MICROPHONE UDIO-TECHNIC PICK-UP ELEMENTS CSM ELEMENT The flexible design of the udio Technica gooseneck allows greater maneuverability of the condenser while maintaining a sleek, compact appearance. Extra udio Technica elements (Cardioid, Hypercardioid, and MicroLine) optional. ML ELEMENT The MicroLine element designed by udio Technica has a flexible gooseneck and extra long microphone yielding a tighter pattern and longer reach. Choir Stick Microphone shown in use at a music conference CHOIR STICK MIC INCLUDES... #Clutch Stand Mount TPER BODY CLUTCH STND MOUNT ND U-U CLIP #U-U Clip TPER BODY CLUTCH STND MOUNT The simple design of the Taper Body Clutch Stand Mount makes it easy to use on almost any standard microphone stand. The compact size creates a sleek look while maintaining a stable foundation. U-U CLIP The U-U Power Module Clip captures the power module against the mic stand for easy connection with mating cable. Made with state of the art molded plastic, this clip is strong and durable. vailable in black. The Choir Stick Microphone is supplied with a Phantom Power Module, a U-U Power Module Clip, and a Taper Body Clutch Stand Mount. The Stick Mic also requires 9-52v of Phantom Power and Does Not include the stand. For more information on ce s Choir Stick Mics including specifications, polar patterns, and installation guides, visit com 32

33 STGE MNGEMENT PRODUCTS - CHOIR STICK MICS #CSM-41 ND #CSM-61 CHOIR STICK MICROPHONES The CSM-41 and CSM-61 Choir Stick Microphones Stick microphone mounts on any standard mi- offer the ultimate performance of an crophone stand with any standard taper-body mic overhead hanging choir microphone in a totally stand clip. It is extremely stable and will not easily portable configuration. The low profile, light tip over. Three pick-up pattern choices mean one weight, black, aluminum, space age alloy Stick will be right for your needs. Use the CSM-41 or mic is available in both 40 and 60 models. The CSM-61 Choir Stick Microphone for children Boom Stick places the microphone element or adult groups on the stage steps, portable risers, ideally above and over any choir. This versatile or anywhere. #CSM-41 ND #CSM-61 CHOIR STICK MICROPHONE SPECIFICTIONS Choir Stick Microphone Model Numbers MODEL # DESCRIPTION #CSM-41/C...40 Long Choir Stick Mic w/ 115º Cardioid Element #CSM-41/SC...40 Long Choir Stick Mic w/ 130º Supercardioid Element #CSM-61/C...60 Long Choir Stick Mic w/ 115º Cardioid Element #CSM-61/SC...60 Long Choir Stick Mic w/ 130º Supercardioid Element MODEL NUMBER MOUNT TYPE POLR PTTERN FREQUENCY RESPONSE OPEN CIRCUIT SENSITIVITY 1 MX INPUT SOUND LEVEL 2 DYNMIC RNGE 3 SIGNL-TO- NOISE RTIO 4 #CSM-41/61C Stick Mic Cardioid 50-17,000 Hz db (2.11mV) 123 db SPL 94 db 65 db #CSM-41/61SC Stick Mic Supercardioid 50-17,000 Hz db (2.37mV) 122 db SPL 94 db 66 db 1 at 1 khz, reference 1/V microbar = 1 microbar = 74 db SPL 2 1 khz at 1% T.H.D, 1 k ohm load 3 at 1 k ohm load 4 referenced at 94 db SPL #CSM-41 ND #CSM-61 CHOIR STICK MICROPHONE DESCRIPTIONS The CSM-41 (40 long) and CSM-61 (60 long) ChOIR. Stick Microphone features SHURE S miniature electret condenser elements assembled into an ultra light weight aluminum boom shaft (.312 Dia.) for long reach, high performance microphone applications. Each Stick microphone version is supplied with a Taper-Body Clutch Stand Mount and a U-U Clip ready for use with any standard microphone stand. The CSM Stick Microphone is a miniature electret condenser microphone available with a series of interchangeable cartridges. It is designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup situations. The small-diameter gooseneck design permits highly flexible positioning while maintaining a smooth, well contoured appearance. The Ouptput Connection Power Module for the Stick microphone is an Integral 3-pin XLRM-type, phased with Phantom Power Requirements of 11 to 52 Vdc, 2.0m typical and an Output Impeadance EI rated at 150 ohms (180 ohms actual). CHOIR STICK MICROPHONE SHURE PICK-UP ELEMENTS CSM ELEMENT The flexible design of the SHURE Micro-flex MX202 elements allow greater maneuverability of the condenser while maintaining a sleek, compact appearance. Extra SHURE elements (Cardioid and Supercardioid) are optional. Choir Stick Microphone being set up at a music conference #Clutch Stand Mount TPER BODY CLUTCH STND MOUNT ND U-U CLIP #U-U Clip TPER BODY CLUTCH STND MOUNT The simple design of the Taper Body Clutch Stand Mount makes it easy to use on almost any standard microphone stand. The compact size creates a sleek look while maintaining a stable foundation. U-U CLIP The U-U Power Module Clip captures the power module against the mic stand for easy connection with mating cable. Made with state of the art molded plastic, this clip is strong and durable. vailable in black. CHOIR STICK MIC INCLUDES... The Choir Stick Microphone is supplied with a Phantom Power Module, a U-U Power Module Clip, and a Taper Body Clutch Stand Mount. The Stick Mic also requires 9-52v of Phantom Power and Does Not include the stand. For more information on ce s Choir Stick Mics including specifications, polar patterns, and installation guides, visit com 33

34 STGE MNGEMENT PRODUCTS - MICROPHONE SOFTPOD MICROPHONE SOFTPOD The Microphone Softpod is another great idea put into action by ce Backstage Co., Inc. This simple yet sturdy device was designed to thread on any standard microphone stand and hold up to 6 standard ball-type microphones securely...the Microphone Softpod is easy to use and lightweight, which makes it portable and efficient. MIC SOFTPOD ON STND MIC SOFTPOD FETURES MICROPHONE SOFTPOD SPECS Soft foam isolates and cushions microphones from each other and minimizes noise when placing or removing microphones. Sturdy black metal base threads directly onto any standard microphone stand. 8 7 The Microphone Softpod s small footprint and light weight design make it great for small locations and portable systems. The Microphone Softpod holds up to (6) standard ball type microphones securely and mounts on most standard microphone stands. STGE MNGEMENT PRODUCTS - MIC HNGER SLUG MICROPHONE HNGER SLUG The CE #42 Microphone.hanger Slug allows you to hang almost any microphone from a cable end and point it in any direction. The Microphone hanger Slug permits a standard microphone stand mount clip to be attached near the end of a hanging cable and the microphone to be clipped in place. The cable is clamped to the slug with a cable tie allowing the cable above to come to a normal relaxed position.. This permits the adjustment of the microphone side-to-side movements (yaw) by turning the microphone clip on the slug without twisting the cable above the slug... the microphone will stay exactly where it is pointed. The up-down movements (pitch) is accomplished by pivoting the microphone up or down at the clip pivot...the Microphone.hanger Slug is a handy, quick-fix item for sound reinforcement, recording, production, or broadcast engagements...the simple design of the CE #42 Microphone.hanger Slug makes it easy to install, use and break down...the Slug screws into many microphone stand mount clips and can even be left in the clip by simply disconnecting the microphone cable from the mic.. This allows the user to keep his original location/direction of the microphone without the hassle of maneuvering it into position again. CE #42 MICROPHONE HNGER SLUG FETURES... Overhead microphone applications over choirs, orchestras, audiences etc... Flexibility means it will work for both permanent or temporary settings Quick and easy set-up and take-down of hanging microphones Positive indexing side-to-side (yaw) and up and down (pitch) Machined aluminum w/ a standard 5/8-27 threaded end and a black anodized finish MICROPHONE HNGER SLUG DETILS ) standard cable tie clamps the microphone cable in place and keeps it from twisting and moving B) The groove helps to eliminate cable movement by maintaining the cable tie in place C) The Microphone Hanger Slug is made from aluminum with a black anodized non-reflective finish CE #42 Microphone Hanger Slug 34

35 Existing Mixer Screws STGE MNGEMENT PRODUCTS - RCK MOUNT KITS RCK MOUNT ERS ND SHELF KITS ce Backstage Co. Inc. s Rack Mount Ears and Shelf Kits are made up of left and right rack mount ears and at shelf pan. The left/right rack ears are fabricated from 16 ga. steel and precision punched to matchup with various tape and CD decks and are finished with a black powder coat. The pan is also 16 ga. steel and is finished with the same heat set black powder coat finish as the rack mount ears. The pan lip may be assembled at the front or rear and in the up or down position for rigid support where needed. This kit provides a positive solid attachment of the deck to standard EI rack rails. Both 2-space and 3-space kits are available. ssembly screws and self-locking nutwashers are included. #BC-RS2U RCK MOUNT ERS ND SHELF KIT WITH 2 SPCE RCK ERS #BC-RS2U Rack Kit Includes: ) 1 Shelf Pan B) 1 Pair of 2 Space Rack Ears C) Screws w/ Self-Locking Nut-washers Mounts in standard EI 19 rack with an open front space up to 17-3/16 wide and an 11 front to back depth. MCKIE RCK MOUNT ERS ce Backstage Co., Inc. has designed NEW Rack Mount Ears specifically for MCKIE mixers. The rack mount ears are manufactured using 16 gauge steel. These rack mount ears will work on a variety of Mackie mixers, including the following models: RCK MOUNT ERS FOR MCKIE MIXERS #RE-1202 Rack Mount Ears for #1202-VLZ Mixer MCKIE RCK MOUNT ERS INSTLL Mackie Rack Mount Ear Kits attach to the mixer using (4) existing chassi screws found at the corners of the mixer. The rack mount ears when properly installed permit the mixer to mount into standard EI rack rails. Follow the steps listed below for compete installation. 1) Disconnect the.c. power from the mixer 2) Remove screws at each corner that match the mounting holes provided in the rack mount ears CUTION: DO NOT REMOVE NY OTHER SCREWS 3) lign the rack mount ears on each side of the mixer to match up with the screw holes 4) ttach the rack mount ears with the screws removed in Step 2 CUTION: DO NOT OVERTIGHTEN SCREWS MCKIE RCK ERS INSTLL (4) Places 1 #RE-1402 Rack Mount Ears for #1402-VLZ Mixer EXMPLE ONLY Rack Mount Ears (2) Places Rack Mount Ears (2) Places #BC-RS2U 2-Space Rack Mount Ears and Shelf Kit #BC-RS3U RCK MOUNT ERS ND SHELF KIT WITH 3 SPCE RCK ERS #BC-RS3U Rack Kit Includes: ) 1 Shelf Pan B) 1 Pair of 3 Space Rack Ears C) Screws w/ Self-Locking Nut-washers Mounts in standard EI 19 rack with an open front space up to 17-3/16 wide and an 11 front to back depth. #BC-RS3U 3-Space Rack Mount Ears and Shelf Kit MTERIL: Steel Sheet, 16 Gauge (.0598 Thick) FINISH: Electro-static applied oven-cured black semi-gloss powder coat FBRICTION: Precision Die Cut #RE-1642 Rack Mount Ears for #1642-VLZ Mixer WLL PNEL LODING/ENGRVING WP-XXXX = 1, 2, 3, 4, and 6 Gang Wall Panels PNEL MODEL #: CONNECTOR ENGRVE WLL PNEL LODING/ENGRVING WP-XXXX = 1, 2, 3, 4, and 6 Gang Wall Panels PNEL MODEL #: CONNECTOR ENGRVE

36 POCKET PNEL CONNECTOR LODING & ENGRVING FORM #025 MINI POCKET MODEL #: #MP-100 SERIES PNEL MODEL #(S): #MP-100 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #123 HLF POCKET MODEL #(S): #PNL-100 SERIES PNEL MODEL #(S): #PNL-100 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #122 FULL POCKET MODEL #(S): #PNL-100/120 SERIES PNEL MODEL #(S): #PNL-100/120 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #124 DOUBLE WIDE POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE C CONNECTOR ENGRVE B CONNECTOR ENGRVE D CONNECTOR ENGRVE #025 MINI POCKET MODEL #: #MP-100 SERIES PNEL MODEL #(S): #MP-100 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #123 HLF POCKET MODEL #(S): #PNL-100 SERIES PNEL MODEL #(S): #PNL-100 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #122 FULL POCKET MODEL #(S): #PNL-100/120 SERIES PNEL MODEL #(S): #PNL-100/120 SERIES PNEL NME(S): CONNECTOR ENGRVE B CONNECTOR ENGRVE #124 DOUBLE WIDE POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE C CONNECTOR ENGRVE B CONNECTOR ENGRVE D CONNECTOR ENGRVE

37 POCKET PNEL CONNECTOR LODING & ENGRVING FORM #132 SUPER POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE C CONNECTOR ENGRVE B CONNECTOR ENGRVE D CONNECTOR ENGRVE #134 SUPER DOUBLE WIDE POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE E CONNECTOR ENGRVE B CONNECTOR ENGRVE F CONNECTOR ENGRVE C CONNECTOR ENGRVE G CONNECTOR ENGRVE D CONNECTOR ENGRVE H CONNECTOR ENVGRVE #132 SUPER POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE C CONNECTOR ENGRVE B CONNECTOR ENGRVE D CONNECTOR ENGRVE #134 SUPER DOUBLE WIDE POCKET MODEL #: #PNL-100/120/140 SERIES PNEL MODEL #(S): #PNL-100/120/140 SERIES PNEL NME(S): CONNECTOR ENGRVE E CONNECTOR ENGRVE B CONNECTOR ENGRVE F CONNECTOR ENGRVE C CONNECTOR ENGRVE G CONNECTOR ENGRVE D CONNECTOR ENGRVE H CONNECTOR ENVGRVE

38 RCK PNEL CONNECTOR LODING & ENGRVING FORM RPL-110 = 1 Space Rack Panels w/ 10 Cutouts PNEL MODEL #: CONNECTOR ENGRVE RPL-230 = 2 Space Rack Panels w/ 30 Cutouts PNEL MODEL #: CONNECTOR ENGRVE RPL-110 = 1 Space Rack Panels w/ 10 Cutouts PNEL MODEL #: CONNECTOR ENGRVE RPL-230 = 2 Space Rack Panels w/ 30 Cutouts PNEL MODEL #: CONNECTOR ENGRVE RPL-345 = 3 Space Rack Panels w/ 45 Cutouts PNEL MODEL #: CONNECTOR ENGRVE

39 NOTES SKETCHES 39

40 CE BCKSTGE CO., INC. STGE POCKET SYSTEMS venue Rockefeller Suite 200 Valencia, C Issue: SPC Tel: Fax: Web: CONNECTRIX SYSTEM Pages #C #C #C #103BBXW #102BBXW #104BBXW #42-MHS #MSP #CSM #WP-310 #WP-214 #PNL-1425 IN-GRDE BCK BOXES Pages STGE PRODUCTS Pages CUSTOM PNELS Pages CE BCKSTGE CO., INC. r Stage Pocket Systems, pages r Panel Fabrication, pages CE BCKSTGE CO., INC venue Rockefeller Suite 200 Valencia, C r Spec Fabrication, pages r Stage Management, pages CHNGE SERVICE REQUESTED r orders@acebackstage.com r Web: CONNECTRIX SYSTEM CONNECTIVITY