SECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS

Transcription

1 PC BORD HRDWRE SECTION CONTENTS COMPUTER BRCKETS COMPUTER BRCKET WORKSHEET MOUNTING BRCKETS PC BORD CCESSORIES Board Guides Card Ejectors

2 ED MOUNTING BRCKETS.062 [1.57].130 [3.3].343 [8.7].203 [5.2] [1.57].343 [8.7].203 [5.2] [1.19].136 [3.5] [6.8].187 [4.8] 4-40 ED MOUNTING BRCKETS CT. NO (1.57) Steel, Zinc Plate CT. NO (1.57) Steel, Zinc Plate CT. NO [.81] CT. NO (.81) Brass, Nickel Plate CT. NO [1.57].562 [14.3].412 [10.5].420 [10.7].165 [4.2].032 [.81].144 [3.7].343 [8.7].412 [10.5].562 [14.3].281 [7.2].062 [1.57].625 [15.9] [31.3].437 [11.1].390 [9.9].032 (.81) Brass, Tin Plate.130 [3.3] CT. NO (1.57) Steel, Nickel Plate CT. NO (1.57 Steel, Nickel Plate CT. NO. 617 OR [5.1].200 [5.1] CT. NO [14.7] [9.6].047 (1.19) Brass, Tin Plate.299 [7.6] [2.5].062 [1.57].165 [4.2].300 [7.6].340 [8.6].032 (.81) Brass, Tin Plate.062 (1.57) Steel, Tin Plate.037 [.94].062 [1.57].218 [5.6].531 [13.5].156 [4.0].037 [.94].135 [3.5].234 [6.0] [7.9] [19.9].281 [7.2].136 [3.5] CT. NO [4.8].062 (1.57) Brass, Nickel Plate.422 [10.7] CT. NO (.94) Brass, Tin Plate CT. NO [11.1].037 (.94) Steel, Tin Plate

3 SNP-IN ED PC MOUNT BRCKETS Snaps in for wave soldering Reduces assembly time Easily mount into predrilled or punched holes Stable no rock design For screw selection refer to pages 79 and 123 SNP-IN PC MOUNT.214 [5.5].180 [4.6] [ [5.1].360 [9.2].050 [1.27] (4) PLS Mounting Detail Mounting Detail.327 [8.3].295 [7.5].200 [5.1].312 [7.9].512 [13.0].060 [1.52] (4) PLS.197 [5.0] (.81) Brass, Tin Plate CT. NO CT. D HOLE E HOLE T NO. H L W D DIMETER E DIMETER MTERIL FINISH 633 (9.5) (9.5).281 (7.1).218 (5.5).140 (3.6).218 (5.5).140 (3.6).032 (.81) Brass Nickel (9.9).453 (11.5) (9.5).234 (5.9).147 (3.7).299 (7.6).128 (3.3).032 (.81) Brass Nickel (10.7).343 (8.7).281 (7.1).281 (7.1).144 (3.7).203 (5.2).128 (3.3).032 (.81) Brass Tin (14.3).562 (14.3).500 (12.7).412 (10.5) (3.0).411 (10.4) (3.0).062 (1.57) Steel Nickel (14.3).562 (14.3).500 (12.7).412 (10.5).144 (3.7).412 (10.5).144 (3.7).062 (1.57) Steel Nickel (16.0).628 (16.0) (9.5).378 (9.6).169 (4.3).378 (9.6).169 (4.3).050 (1.27) Brass Tin (17.4).687 (17.4) (9.5).500 (12.7).144 (3.7).500 (12.7).144 (3.7).032 (.81) Steel Tin (25.7).487 (12.4).312 (7.9).816 (20.7).140 (3.6).332 (8.4).140 (3.6).050 (1.27) Steel Nickel (29.4).656 (16.7) (9.5).906 (23.0).169 (4.3).420 (10.7).169 (4.3).032 (.81) Steel Tin BORD BRCKETS Originally designed for our line of standardized terminal boards; these brackets can also be used in other applications. See pages for Turret Terminal Boards. MTERILS:.062 (1.57) Steel, Nickel Plate UNIVERSL CLER HOLE BRCKETS H D T D HOLE E L L E HOLE S W W.156 [4.0].203 [5.2].032 (.81) Brass, Tin Plate CT. NO [5.0].196 [5.0].203 [5.2].328 MOUNTING BRCKETS.156 [4.0].530 [13.5].560 [14.2] CT. NO (2.03) luminum [15.9] [39.7].177 [4.5] (3) PLS.187 [4.8].312 [7.9].128 [3.3].484 [12.3].562 [14.3] [3.3] [4.8] [0.8] [11.1].437 [11.1].187 [4.8].156 [4.0].156 [4.0].281 [7.2] CT. NO (1.57) Steel, Nickel Plate CT. NO (1.27) Steel, Nickel Plate CT. NO (.81) Brass, Tin Plate 119

4 LEVER CTION PC CRD EJECTORS Card ejectors offer a simple and reliable way of installing and ejecting circuit boards. Card ejectors reduce the stress on board connectors by improper removal of board. Ejectors also protect components on board from damage during removal or installation. Ejectors supplied with stainless steel pin to assure quick assembly of ejector to card. Designed for.062 (1.57) PC cards. Level action ejectors aids card insertion and extraction. Supplied complete with stainless steel spring pin. White Nylon 6/6, UL Rated 94V-2 CRD MOUNTING DIMENSIONS PC CRD [9.6] 1 [28.6] 1 [28.6] PC BORD CCESSORIES CT. NO [9.9].109 [2.8] MOUNTING HOLE Natural Nylon 6/6, UL Rated 94V-2 1 [28.0].520 [13.2].640 [16.3] CT. NO CT. NO [3.4].290 [7.4] 1 [31.8].260 [6.6].600 [15.3] HORIZONTL TYPE PC BORD GUIDES Guides may be used horizontally or vertically and snap into (3.2) diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation. No special tools required to install..245 [6.2].172 REF. CT. NO CT. NO Sturdy Nylon construction Mounts into chassis with out tools ssures proper alignment of board Quick and easy installation of board. B L B.129 [3.3].078 [2.0] Mounting Detail.129 [3.3].085 [2.2].132 [3.4].390 [9.9].390 [9.9].980 [24.9].640 [16.3].640 [16.3] CT. NO. L B (63.5) 2.0 (50.8) (76.2) 2.5 (63.5) (88.9) 3.0 (76.2) (101.6) 3.5 (88.9) (114.3) 4.0 (101.6) (127.0) 4.5 (114.3) (139.7) 5.0 (127.0) (152.4) 5.5 (139.7) (165.1) 6.0 (152.4) (177.8) 6.5 (165.1) (177.8) 6.5 (165.1) 3.25 (82.6) (190.5) 7.0 (177.8) (190.5) 7.0 (177.8) 3.50 (88.9) (203.2) 7.5 (190.5) (203.2) 7.5 (190.5) 3.75 (95.3) (215.9) 8.0 (203.2) (215.9) 8.0 (203.2) 4.00 (101.6) 120

5 VERTICL PC BORD GUIDES Vertical board guides provide for a quick and easy assembly of circuit boards. Sturdy design assures boards stay square. These guards can be mounted to chassis or directly to a mother board. Mounting holes have brass threaded inserts to assure secure mounting of guide. fter bracket is installed, boards are quickly locked into place or released for repair or upgrades. Locking pins at the top of the bracket can be set/released using finger pressure, no tools are required. Brass threaded inserts assure sturdy connection to chassis or mother board. vailable for circuit boards to tall. Locking pin keeps circuit board locked into place. M3 mounting screws available. Supplied with hardware: 2 screws, 2 washers and 2 lock washers. ll brackets use same footprint, no redesign of mounting holes required if changing bracket height..118 [3.00].087 [2.20].072 [1.8].072 [1.8] PC BORD GUIDES H H.473 [12.00].710 [18.0] M3 X [12.00].709 [18.0] M3 X 8. CT. H LOCK NO. HEIGHT PIN HEIGHT (50.0) (42.0) (65.0) 2 (56.5) (90.0) (81.5) (120.0) (112.5) Guide: Nylon Threaded Insert: Brass, Nickel plate Guide: Polystyrene Threaded Insert: Brass, Nickel plate CT. H LOCK NO. HEIGHT PIN HEIGHT (160.0) 6.000(152.0) 121

6 These computer brackets have been designed to accommodate a large variety of board sizes and heights. vailable with tabs located properly for ES/EIS or formats. Blanks can be machined or stamped for prototype or low volume production. ll brackets are nickel plated for a clean look and a protective finish. Standard cut-outs can be added to these blanks to suit your specific production needs. See page for standard cut-outs and design worksheet. Premium quality Designed to fit all PC computers height brackets available Blanks available for fillers Fast delivery and cost effective tooling for special designs STNDRD BLNK BRCKETS.720 [18.3].187 [4.8] [56.5] EIS/IS 1 [31.8].240 [6.1].740 [18.8].110 [2.8].210 [5.4].350 [8.9].317 [8.1].032 (.81) Steel, Matte Nickel Plate. CT. NO COMPUTER BRCKETS CT. NO [4.8].398 [10.1] [85.4].343 [8.7].310 [7.9] [11.9] EIS/IS or CT. NO [4.8].609 [15.5].240 [6.1].177 [4.5].295 [7.5] Reinforced with rib for extra strength [4.8] [16.3].187 [4.8] [104.9] [110.8].330 CT. NO CT. NO

7 STNDRD BLNK BRCKETS EIS/IS.187 [4.8].187 [4.8].305 [7.8] [87.1].327 [8.3].229 [5.8] [10.1] [88.9].791 [20.1] [61.0].551 [14.0].110 [2.8] REF..740 [18.8].110 [2.8] [13.9].327 [8.3].740 [18.8] CT. NO CT. NO [4.8] [89.0].642 [16.3].736 [18.7] [90.8].490 [12.5].740 [18.8].850 [21.6] [13.9].791 [20.1] CT. NO CT. NO [8.3].310 [7.9].187 [4.8].472 [12.0] LOW PROFILE BLNK BRCKETS [88.9] [1.9].047 [1.2].758 [19.3].092 [2.4].235 [6.0].273 [7.0].421 [10.7].850 [21.6] COMPUTER BRCKETS [79.2] [71.5] [3.05] (EMI DIMPLE).466 [11.9].341 [8.7] [79.2] [71.5] [53.9] [3.05].190 [4.9] (EMI DIMPLE).466 [11.9].732 [18.6].557 [14.2].866 [22.0].732 [18.6].675 [17.2].031 [0.79] DIMPLE.141 [3.6].216 [5.5].141 [3.6].340 [8.7] CT. NO CT. NO

8 These computer brackets have been designed with a variety of holes and cutouts to connect most peripherals. The brackets shown reflect the most common configurations for most applications. If our standard brackets do not fit your EIS/IS STNDRD COMPUTER BRCKETS [37.4] D-SUB production requirements, we can fabricate a bracket to your exact specifications. Refer to pages for blank dimensions and page 126 for standard cutout dimensions. 9 PIN Peripherals Video Cards Parallel/Serial Ports External Hard Drives External CD Drives [43.4] [49.9] REF [55.9] REF. CT. NO CT. NO Refer to Cat. No EIS/IS.578 [14.7] EIS/IS.578 [14.7] COMPUTER BRCKETS CT. NO EIS/IS CT. NO CT. NO CT. NO CUTOUT TYPE [27.2] REF. EIS/IS 25 PIN [58.3] [75.0] REF [47.9] [71.3] REF. 15 PIN PIN CT. NO CT. NO EIS/IS EIS/IS 37 PIN CUTOUT TYPE PIN VENT [27.2] REF [55.7] [72.4] REF [57.3] REF [25.5] CUTOUT TYPE 50 EIS/IS 50 PIN.700 [17.8] EIS/IS OR HOLE TYP. CT. NO Refer to Cat. No [48.4] REF. CT. NO LOW PROFILE CCESS PORT CT. NO [8.0].270 [6.9] [40.7].462 [11.8] 124

9 EIS/IS [55.7].593 [15.1] MULTIPLE D-SUB CUTOUT TYPE 25 EIS/IS [47.9].320 [8.2] CT. NO [72.4] REF [31.8] REF. CT. NO [24.8] REF [71.3] REF. EIS/IS [61.2] [25.6] CUTOUT TYPE 25 EIS/IS [47.9].578 [14.7] CT. NO [38.1] REF [73.7] REF. CT. NO [27.2] REF [71.4] REF. CT. NO CT. NO Refer to Cat. No SCSI 1-50 PIN CUTOUT SCSI [2.24] 50 PIN [20.3].088 [2.24] SCSI 1-68 PIN.280 [7.1] (3) PLS CUTOUT SCSI 1 68 PIN EIS/IS INPUT MIC [43.6] REF..920 [23.4] [52.3] REF [50.2] [39.4].525 [13.4].335 [8.5] OUTPUT PERIPHERL SOUND CRDS SCSI CT. NO CT. NO Refer to Cat. No SCSI 2, 3 & 4-50 PIN CUTOUT SCSI 2, 3 OR 4 50 PIN [1.91].080 [2.03].640 [16.3].480 [12.2] SCSI 2, 3 & 4-68 PIN ISDN CUTOUT SCSI 2, 3 OR 4 68 PIN [38.4] [61.6] REF..982 [25.0] [53.9] REF [58.6] [44.9] HND SET ISDN/PC FX COMPUTER BRCKETS CT. NO [61.1] [77.7] REF. CT. NO Refer to Cat. No [6.9] [81.3] [71.4].585 [14.9] [27.2] VIDEO CRDS Refer to Cat. No [12.2] EIS/IS [26.5] [36.7] FX - MODEM PHONE LINE S-V IN VIDEO IN UDIO OUT UDIO IN CT. NO [37.9] [50.4] REF. CT. NO [13.5] EIS/IS OR [29.5] [55.5] [29.5].595 [15.1] USB Refer to Cat. No [3.8] (3) PLS [53.6] [48.5] [43.5].835 [21.2] NETWORK.550 [14.0] CT. NO [6.5].128 [3.3] (4) PLS CT. NO [7.7].650 [16.5] 125