Flextac BGA Rework Stencils
|
|
- Kimberly Bishop
- 5 years ago
- Views:
Transcription
1 Description These flexible solder paste BGA rework stencils are laser cut from high quality, anti-static polymer film with a residue-free adhesive backing. Because they are self-sticking, no tape or fixturing is needed. The adhesive seals around each BGA pad to prevent solder paste from bleeding under the stencil when the paste is applied. Easy to use and leave no residue on the board surface. Typical BGA rework stencils are made from metal and require fixturing or taping to position them and hold them in place. Metal stencils warp easily, and if the circuit board has undulations in the board surface, the metal stencil will not sit flat. Since there is no gasket-like seal, solder paste can easily bleed under metal stencils when paste is applied with a squeegee. Also solder paste can spill out over the sides of flat metal stencils contaminating the circuit board surface. Metal stencils require tedious stencil cleaning. To use metal stencils effectively, a high level of operator skill is required. Features & Benefits Residue-free adhesive backing seals around BGA pads to prevent solder paste bleed Laser cut ensures precise aperture size Disposable eliminates tedious stencil cleaning Flexible conforms to board surface Fold-up sides for easy placement and solder paste containment Low cost Packaged in a handy ESD safe carrying case
2 Applications Applying solder paste for BGA rework How Flextac BGA Rework Stencils Work 1) Select the proper size and fold up the side tabs
3 2) Peel off the cover film exposing the adhesive backing 3) Place in position using the handy side tabs
4 4) Apply paste using a standard metal squeegee 5) Remove the stencil and save for another reuse or dispose Ordering Information Part Number CRC Description Flextac BGA Rework Stencil Kit Includes: 40 (2 x 20 sizes) Flextac BGA Stencils
5 Part Number Description 1 Squeegee Handle 3 Squeegee Blades (3 different sizes) 1 Stainless Steel Spatula 1 Conductive Storage Case Part Number Thickness Aperture Ball Count Ball Pattern Pitch Component Body CRCB enquire 5 15 mm x 15 mm Connector CRCB x (0.75 mm) 7 mm x 9 mm CRCB x 8 11 mm x 13 mm CRCB x 8 10 mm x 13 mm CRCB x 13 9 mm x 11.5 mm
6 CRCB x mm x 13 mm CRCB x mm x 13 mm CRCB x 16 9 mm x 15.5 mm CRCB x mm x 12 mm CRCB x 14 P5-Row 12 mm x 12 mm CRCB x mm x 15 mm CRCB x mm x 23 mm CRCB (0.483 mm) x mm x 22 mm CRCB (0.209 mm).029 (0.736 mm) x mm x 21 mm
7 CRCB (0.533 mm) x mm x 17 mm CRCB x 20 x CRCB x mm x 17 mm 20 x 20 CRCB x 4 x Center CRCB (0.813 mm) x mm x 25 mm 22 x 22 CRCB x 6 23 mm x 23 mm Center CRCB x mm x 19 mm
8 23 x 23 CRCB (0.736 mm) x 5 31 mm x 31 mm Center CRCB x mm x 25 mm CRCB (0.838 mm) x mm x 25 mm CRCB x mm x 25 mm CRCB x 20 P7-17 mm x 17 mm CRCB x 21 x 22 x 22 CRCB P7-Row + 6 x 6 23 mm x 23 mm Center
9 26 x 26 CRCB P5-Row + 8 x 8 x Center CRCB x mm x 23 mm CRCB x mm x 25 mm CRCB x 33 P5-Row 42.5 mm x 42.5 mm CRCB (0.813 mm) x mm x 32.5 mm CRCB x 26 x CRCB x 26 x CRCB x mm x 29 mm
10 CRCB x mm x 31 mm CRCB x mm x 35 mm CRCB x mm x 35 mm CRCB (0.559 mm) x mm x 40 mm Supplied by: INTERTRONICS 17 Station Field Industrial Estate, Banbury Road, Kidlington Oxfordshire England OX5 1JD t e sales@intertronics.co.uk Last updated: June 2018 Version: 4.1 Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.
PRELIMINARY APPLICATION SPECIFICATION
SEARAY BOARD TO BOARD INTERCONNECT SYSTEM 4970 / 466 SMT Plug Connector (shown with kapton pad for pick and place) 4971 / 467 SMT Receptacle Connector (shown with kapton pad for pick and place) SEARAY
More informationPI31xx Product Family Reflow Soldering Guidelines
APPLICATION NOTE AN:302 PI31xx Product Family Reflow Soldering Guidelines Chris Swartz Principal Applications Engineer Contents Page Introduction 1 Storage 1 Solder Paste 1 Leaded Applications 1 PCB Considerations
More informationPROCESSING RECOMMENDATIONS. For Samtec s SEAM8/SEAF8 Vertical Connectors
The method used to solder these high density connectors is the same as that used for many BGA devices even though there are some distinct structural differences. BGA s have spherical solder balls attached
More informationApplication Note AN-1028 Design, Integration and Rework Guidelines for BGA and LGA Packages
Application Note AN-1028 Design, Integration and Rework Guidelines for BGA and LGA Packages Table of Contents Page Design considerations...2 Substrate...2 PCB layout...2 Solder mask openings...3 Terminations...4
More informationImproved performance. APR-5000-XLS System configurations and technical specifications on pages 42-43
APR-5000-XL/-XLS Advanced Package Rework System The APR-5000-XL Advanced Package Rework System provides board capability with small board precision. This system performs precise, cost effective rework
More informationAssembly Considerations for Linear Technology Module TM BGA Packages. July
Assembly Considerations for Linear Technology Module TM BGA Packages July 2012 Package Construction PCB Design Guidelines Outline Moisture Sensitivity, Pack, Ship & Bake Board Assembly Process Screen Print
More informationAPPLICATION SPECIFICATION TITLE PAGE REVISION
1 of 10 E 1 OBJECTIVE...2 2 SCOPE...2 3 GENERAL...2 4 DRAWINGS AND APPLICABLE DOCUMENTS...2 5 APPLICATION REQUIREMENTS...2 5.1 PCB layout... 2 5.2 Keep-out zone... 2 5.3 Packaging... 2 5.4 Multiple connector
More informationManufacturing Notes for RF1602
Manufacturing Notes for RF1602 The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for
More informationEffect of Board Clamping System on Solder Paste Print Quality Dr. Rita Mohanty Speedline Technologies Franklin MA
Effect of Board Clamping System on Solder Paste Print Quality Dr. Rita Mohanty Speedline Technologies Franklin MA Rajiv L. Iyer & Daryl Santos Binghamton University Binghamton, NY Abstract Stencil printing
More informationREFLOW SOLDERING AND BOARD ASSEMBLY
MEMS Microphone Handling and Assembly Guide PURPOSE AND SCOPE This document provides information and general guidelines for handling and assembling boards with InvenSense Micro Electro- Mechanical Systems
More informationAPPLICATION SPECIFICATION
IPASS 0.8mm PITCH I/O CONNECTOR 1.0 SCOPE...2 2.0 PRODUCT DESCRIPTION...2 2.1 PRODUCT NAME AND SERIES NUMBER...2 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS...2 3.0 REFERENCE DOCUMENTS...2 3.1 MOLEX
More informationzqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe
zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe Application Specification 114-32023 02 MAR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationSocket Mounting Recommendations and Reflow Profile
Purpose This document is meant to serve as a guide for mounting E-tec surface mount device (SMD) sockets to the printed circuit board (PCB). The recommendations described here are guidelines only, and
More informationAPPLICATION SPECIFICATION
1 of 21 F 1.0 OBJECTIVE The objective of this specification is to provide information to assist with the application and use of MEG- Array High Speed Mezzanine BGA (Ball Grid Array) connectors system.
More informationPreliminary Product Overview
Preliminary Product Overview Features 1.0 A per channel / 3.0 A Total Current Maximum Voltage (AC or DC): +150 V Low On-State Resistance < 1.0 Ω 10 GΩ Input to Output Isolation < 10us Switching Time High
More information1. Table of contents History Tools Parts manipulation Soldering Soldering iron or station...
1. TABLE OF CONTENTS 1. Table of contents... 3 2. History... 15 3. Tools... 19 3.1. Parts manipulation... 19 4. Soldering... 23 4.1. Soldering iron or station... 23 4.2. Hot-air rework stations... 24 4.3.
More informationAssembly Considerations for Analog Devices Inc., µmodule TM LGA Packages AUGUST 2018
Assembly Considerations for Analog Devices Inc., µmodule TM LGA Packages AUGUST 2018 1 Outline Outline Package Construction PCB Design Guidelines Moisture Sensitivity, Pack, Ship & Bake Board Assembly
More informationPROCESSING RECOMMENDATIONS
PROCESSING RECOMMENDATIONS For Samtec s 0.80mm SEARAY Right Angle (SEAF8-RA) Connectors The method used to solder these high-density connectors is the same as that used for many BGA devices even though
More informationimac Intel 27" EMC 2546 Adhesive Strips
imac Intel 27" EMC 2546 Adhesive Strips Replacement Reattach your display with a set of adhesive foam strips. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION
More informationReflow Soldering of MEMS Microphones
Reflow Soldering of MEMS Microphones Page 1 of 7 Introduction This application note provides guidance and suggestions for assembling boards with MEMS microphones. Parameter and profile details are presented,
More informationManufacturing Notes for RFPA3809
Manufacturing Notes for RFPA3809 The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for
More informationModule 7 Electronics Systems Packaging
Module 7 Electronics Systems Packaging Component Assembly, materials for assembly and joining methods in electronics -Surface Mount technology- design, fabrication and assembly; -failures library; -materials
More informationRESTRICTED WORLD TRADE G/IT/SPEC/8/Rev.1 23 February 1998 ORGANIZATION PROPOSED ADDITIONS TO PRODUCT COVERAGE. Submission by Australia.
RESTRICTED WORLD TRADE G/IT/SPEC/8/Rev.1 23 February 1998 ORGANIZATION (98-0664) Committee of Participants on the Expansion of Trade in Information Technology Products Original: English PROPOSED ADDITIONS
More informationAN-100 MEMS Microphone Handling and Assembly Guide
MEMS Microphone Handling and Assembly Guide PURPOSE AND SCOPE This document provides information and general guidelines for handling and assembling boards with InvenSense Micro Electro- Mechanical Systems
More informationimac Intel 21.5" Retina 4K Display Adhesive
imac Intel 21.5" Retina 4K Display Adhesive Strips Replacement Replace the Adhesive Strips on your imac Intel 21.5" Retina 4K Late 2015 EMC 2833. Escrito por: Jeff Suovanen ifixit CC BY-NC-SA es.ifixit.com
More informationDISTRIBUTION LIST CHANGE RECORD
DISTRIBUTION LIST In charge of the document: Fabrice Soufflet Process Engineering Group Copy to: Pierre Maurice Marie-Cécile Vassal Dominique Blain Pierre Wang Responsibility President Project Group Manager
More informationCrimplok ST* and SC Non-Adhesive Fiber Optic Single & Multi-mode Connectors
Crimplok ST* and SC Non-Adhesive Fiber Optic Single & Multi-mode Connectors Instructions July 2002 78-8073-7660-9-F 1 Contents 1.0 Warnings and Recommendations... 3 2.0 Tool Kit Contents... 4 3.0 Termination...
More informationProduct Tape and Reel, Solderability & Package Outline Specification
Manufacturing Note MN-001 Product Tape and Reel, Solderability & Package Outline Specification Contents 1. General Information 2. Tape and Reel / T&R 3. Package Outline Drawing / POD 4. Electro Static
More informationimac Intel 21.5" EMC 2544 Adhesive Strips
imac Intel 21.5" EMC 2544 Adhesive Strips Replacement Replace the Adhesive Strips in your imac Intel 21.5" EMC 2544. Rédigé par: Sam Lionheart ifixit CC BY-NC-SA fr.ifixit.com Page 1 de 17 INTRODUCTION
More informationPRE: See Yun Jaan 15 Jul 08 Rev C. APP: Leong See Fan DCR No. D _438039
Application 114-1114 Specification PRE: See Yun Jaan 15 Jul 08 Rev C APP: Leong See Fan DCR No. D20080715001838_438039 SO(Small Outline) DIMM (Dual-In Memory Module) Sockets, 144 Positions with 0.8mm Centerline
More informationOptilia Instruments. Empowering Your Vision!
Optilia Instruments Empowering Your Vision! Product Review: Optilia BGA Inspection Systems Cutting edge technology in optical inspection of BGA, µbga, CSP and FlipChip soldering! RevB, November-2013 Optical
More informationTORX147(F,T) TORX147(F,T) FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE. 1. Absolute Maximum Ratings (Ta = 25 C) 2.
FIBER OPTIC RECEIVING MODULE TORX147(F,T) FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE Unit: mm For JEITA Standard CP 1212 (Digital Audio Optical Interface for Consumer Equipment). A self tapping
More informationProduct Tape and Reel, Solderability & Package Outline Specification
Manufacturing Note MN-001 Product Tape and Reel, Solderability & Package Outline Specification Contents 1. General Information 2. Tape and Reel / T&R 3. Package Outline Drawing / POD 4. Electro Static
More informationSOFIX - A fully shielded front IO solution. Product Presentation
- A fully shielded front IO solution Product Presentation Product Description SOFIX is a front IO interconnection system comprised of R/A headers and cable plugs, suitable for the distribution of power
More informationPAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 X3X 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE 13-08-18 SERIES Micro-SPDT PART NUMBER R516 X3X 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
More informationAssembly Considerations for Linear Technology mmodule TM LGA Packages. September 2016
Assembly Considerations for Linear Technology mmodule TM LGA Packages September 2016 1 Outline Package Construction PCB Design Guidelines Moisture Sensitivity, Pack, Ship & Bake Board Assembly Process
More informationUsing MLOs to Build Vertical Technology Space Transformers
Presentation to Southwest Test Workshop 2002 Using MLOs to Build Vertical Technology Space Transformers Bill Fulton and Bill Pardee Wentworth Laboratories Overview 1. Terminology 2. Benefits of MLOs vs
More informationIT3D(M)-300S-BGA (37) Lead-Free THERMAL CYCLING TEST REPORT
TR066E-018 ITD(M)-00S-BGA (7) Lead-Free THERMAL CYCLING TEST REPORT - Post 6000 Cycles Report - APPROVED TY.ARAI Nov. 18, 009 CHECKED TM.MATSUO Nov. 17, 009 CHARGED TY.TAKADA Nov. 17, 009 HIROSE ELECTRIC
More informationDome Camera. Hardware Manual Z81, Z /01/08
Dome Camera Hardware Manual Z81, Z82 2018/01/08 Table of Contents Precautions 3 Regulatory Compliance... 4 Safety and Compliance Information... 5 Introduction 7 List of Models... 7 Package Contents...
More informationPEREGRINE SERIES RETROFIT INSTALLATION GUIDE
06.05.17 HanleyLED H100W-PPS524V Spec Sheet SOLUTIONS THAT MAKE SENSE PEREGRINE SERIES RETROFIT INSTALLATION GUIDE Light Up New Markets Your Local Distributor: Grimco US www.grimco.com 800.542.9941 Canada
More information1. INTRODUCTION 2. REFERENCE MATERIAL. 1 of 8
Application Specification 67 Positions 0.5 Pitch M.2(NGFF) MINICARD 114-115006 19May14 Rev. B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
More informationPrecision Advanced Package Rework
Precision Advanced Package Rework The APR-5000 Series Advanced Package Rework Systems incorporate state-of-the-art vision, and closed-loop time, temperature and airflow control. Precision placement and
More informationInstructions for SVC-KIT-0020
Kaleidescape, Inc. July 22, 2010 Instructions for SVC-KIT-0020 Title Time to complete 1U Server Power Supply Replacement 1 hour Procedure to complete Locate Parts and Tools Service Kit Parts Power supply
More informationTORX178B TORX178B FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE. 1. Maximum Ratings (Ta = 25 C) FIBER OPTIC RECEIVING MODULE
FIBER OPTIC RECEIVING MODULE TORX178B FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE Unit: mm Conforms to EIAJ Standard CP 1201 (For Digital Audio Interface including Fiber Optic inter connections).
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationAdvance Package Rework Systems. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.
Advance Package Rework Systems Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com T o o l s f o r T e c h n o l o g y OK International has been a leading
More informationThese devices require adequately trained and experienced operating personnel.
MMA, 2014 PI Ceramic GmbH PD410 Circular PICMA Bender Piezo Actuators Figure 1: Circular PICMA bender actuator (here: PD410.10) INFORMATION Before soldering, installing and operating the actuator, read
More informationREMOTE HEAD ADAPTER INSTALLATION GUIDE
REMOTE HEAD ADAPTER INSTALLATION GUIDE The Remote Head adapter is a valuable accessory for the Uniden BC-780, 785 and 796 scanners. It allows the scanner's control panel to be removed from the radio and
More informationAdvanced BGA Rework Station. Suitable for all kind of reworks on different SMT components
Advanced BGA Rework Station Suitable for all kind of reworks on different SMT components Advanced BGA Rework Station New Key Features Compact and Stable Design Larger Board Holding Capacity One Touch Lock
More informationStandard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
More informationimac Intel 27" Retina 5K Display CPU Replacement
imac Intel 27" Retina 5K Display CPU Replacement Replace or upgrade the CPU in your imac Intel 27" Retina 5K Display. Written By: Sam Lionheart ifixit CC BY-NC-SA www.ifixit.com Page 1 of 36 INTRODUCTION
More informationNo. of. Voltage. Power
Value Flex Eco VFEG1 Data Sheet Benefits Energy saving low-power LED flexible strip for decorative, shelf and hospitality lighting. Self-adhesive tape on the back for easy and fast installation. Consistent
More informationInstallation Instructions
Time Commander II Electronic Time Lock Installation Instructions This Sargent & Greenleaf Time Commander II electronic time lock combines ease of operation with security. Advanced electronic circuit design
More informationReflow Kit V3 Basic Instruction Manual
Reflow Kit V3 Basic Instruction Manual www.beta-estore.com Beta LAYOUT Ltd. Bay 98 Shannon Free Zone, Co. Clare Ireland Telefon +353 (0) 61 70 11 70 Fax +353 (0) 61 70 11 65 Contents 1. V3 Basic Components...
More informationPogo Pin / Spring Probe. Custom Configurations. Test & Burn-in (ZIF) SOCKET SOLUTIONS. Up to 40 GHz. Prototyping. Production.
, PROTOTYPING How to Choose The Right Socket Finding the right socket for your project is easy. Gathering the following key characteristics will assist you in finding the correct ET part number: 1. Pin
More informationAssembly Considerations for Analog Devices Inc., mmodule TM BGA Packages
Assembly Considerations for Analog Devices Inc., mmodule TM BGA Packages FEBRUARY 2018 2018 Analog Devices, Inc. All rights reserved. 1 Outline Package Construction PCB Design Guidelines Moisture Sensitivity,
More informationA Backlighted LCD for your K1
A Backlighted LCD for your K1 (K1BKLTKIT) Tom Hammond - NØSS, July 27, 2006 Rev C Thanks to Wayne Burdick, N6KR for suggesting this implementation of backlighting the K1 display. APPLICABILITY This modification
More informationHGR-2488 Prism Installation Instructions
HGR-2488 Prism Installation Instructions These installation instructions are applicable to the following models: TASCAM 2488 MK1 (original model) TASCAM 2488 MK II TASCAM 2488 NEO Page 1 of 8 Important
More informationSKY : 5 GHz, ac Switch/Low-Noise Amplifier Front End
DATA SHEET SKY85608-11: 5 GHz, 802.11ac Switch/Low-Noise Amplifier Front End Applications Wi-Fi-enabled handsets, tablets, and mobile systems System-in-Package (SiP) modules for embedded systems 802.11n/ac
More informationTORX177(F,T) TORX177(F,T) TENTATIVE FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE. 1. Maximum Ratings (Ta = 25 C)
TENTATIVE FIBER OPTIC RECEIVING MODULE TORX177(F,T) FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE Unit: mm For JEITA Standard CP- 1212 (Digital Audio Optical Interface for Consumer Equipment).
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationMulTI-Touch Projected Capacitive Touch Screen Integration Guide
MulTI-Touch Projected Capacitive Touch Screen Integration Guide Document Number: 6500493 Rev. 1.1 Pg. 1 The information provided in this document is intended as a guide only and is subject to change without
More informationPlasma Panel Replacement Guide DU-42PX12X
Plasma Panel Replacement Guide DU-42PX12X Panel Replacement: At this point, the panel has been determined to be defective and replacement is necessary. Upon receiving the replacement panel, it must be
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationPERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
More informationUltra low capacitance ESD protection for Ethernet ports. ESD protection high-frequency AC-coupled Ethernet ports
Rev. 3 17 June 2010 Product data sheet 1. Product profile 1.1 General description The is designed to protect Input/Output (I/O) ports that are sensitive to capacitive loads, such as Ethernet, from destruction
More informationSKY33108: BAW GHz WiFi Pass/ GHz WiMAX Reject Filter
preliminary data sheet SKY3318: BAW 2.4 2.473 GHz WiFi Pass/ 2.495 2.69 GHz WiMAX Reject Filter Applications l 2.5 GHz WiMAX PCMCIA cards USB dongles CPE Notebook and ultra mobile PC Pico and Femto base
More informationTransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
More informationProlonged exposure to ultraviolet light may deteriorate the chemical composition used in the pc board jack connector material.
This specification covers the requirements for application of Terminal Block Stacking Connectors. The complete line consists of one piece side entry, angled entry, and top entry printed circuit (pc) board
More informationULL0402FC05C. Description. Mechanical characteristics PIN CONFIGURATION. SMART Phones Portable Electronics SMART Cards
LOW CAPACITANCE unbumped flip chip tvs array Description The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic
More informationAudi Climate Control LCD Rebuild Kit
Audi Climate Control LCD Rebuild Kit Restores cracked, leaking or missing segment LCD s for the following vehicles: 1997-98 Audi A4 with electronic climate control center 1995-97 Audi A6 with electronic
More informationDesign and Assembly Process Implementation for BGAs
ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES Design and Assembly Process Implementation for BGAs Developed by the Device Manufacturers Interface Committee of IPC October 25, 2000 Users of this standard
More informationProduct Configuration Solder Tail Press-fit Tail MBCE Vertical Receptacle Yes Yes MBCE Right Angle Receptacle Yes / MBCE Straddle Mount Yes /
Application Specification 114-128016 28 FEB 17 Rev A3 NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless otherwise
More informationRClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
More informationHow to Build Reliable Mobile Displays
How to Build Reliable Mobile Displays Petri Savolainen Thinner, lighter, larger From the early days of mobile phones to the present, manufacturers have fiercely competed on who is able to make the smallest,
More informationEQ573 Assembly guide. EQ573 Assembly guide Main board 1. Diodes. 2. Resistors (1) 3. Test pins. 4. Ceramic capacitors.
EQ573 Assembly guide Safety warning The kits are main powered and use potentially lethal voltages. Under no circumstance should someone undertake the realisation of a kit unless he has full knowledge about
More informationSPM0410HR5H-PB. "Mini" SiSonic TM Microphone Specification With MAX RF Protection - Halogen Free
"Mini" SiSonic TM Microphone Specification With MAX RF Protection - Halogen Free Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 10 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION "Mini"
More informationMVPplus Quick Reference Guide
MVPplus Quick Reference Guide Use this guide to operate your printer on a daily basis. For more detailed information, refer to the User Guide. Contents External View...........................................................
More information3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: January 14, 2008 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon
More informationMULTI-FACETED APPROACH TO MINIMIZE PRINTED CIRCUIT BOARD WARPAGE IN BOARD ASSEMBLY PROCESS
As originally published in the SMTA Proceedings MULTI-FACETED APPROACH TO MINIMIZE PRINTED CIRCUIT BOARD WARPAGE IN BOARD ASSEMBLY PROCESS Srinivasa Aravamudhan, Christopher Combs, Abhishek Prasad, and
More informationSolving Integration Challenges for Printed and Flexible Hybrid Electronics
Solving Integration Challenges for Printed and Flexible Hybrid Electronics SEMICON West 16 July 2015 Proprietary Information www.americansemi.com What are Flexible Hybrid Electronics 2 Flexible Hybrid
More informationModel 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
More informationPin-In-Paste (PIP) Solder Technology FASTON Contacts
Pin-In-Paste (PIP) Solder Technology FASTON Contacts Application Specification 114-133081 24 JUL 17 Rev A1 All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are
More information6 Channel EMI Filter Array with ESD Protection
6 Channel EMI Filter Array with ESD Protection Features Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network Greater than 32dB attenuation
More informationHolder, Speaker and Charger Functions (With Optional Cellular Phone Hands free capability) FEATURES...1
Holder, Speaker and Charger Functions (With Optional Cellular Phone Hands free capability) USER GUIDE CONTENT FEATURES...1 GETTING TO KNOW YOUR MULTI-FUNCTION MOUNT KIT...2 HOW TO MOUNT THE CRADLE IN YOUR
More informationDo s and Don ts with SCALE -2 Gate Drivers
Do s and Don ts with SCALE -2 Gate Drivers SCALE -2 IGBT Driver Cores and Plug-and-Play Drivers Introduction and Overview This highlights important points that must be considered when using SCALE -2 driver
More informationBGA CSP. BGA & CSP Rework Systems. The comprehensive solution to array package rework.
Worldwide and U.S. Headquarters 1530 O Brien Drive Menlo Park, CA 94025 USA Phone: + 1-650-325-3291 1-800-776-1778 Fax: + 1-650-325-5932 Europe Headquarters Eagle Close, Chandler s Ford Eastleigh Hampshire
More informationonlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
More informationSamsung Galaxy S10 Motherboard
Samsung Galaxy S10 Motherboard Replacement This guide shows how to remove the motherboard for the Galaxy S10. This assembly includes the USB-C charging port. Written By: Arthur Shi ifixit CC BY-NC-SA www.ifixit.com
More informationAutomated Sl Selective Laser Assembly System
Automated Sl Selective Laser Assembly System Ray Prasad Ray Prasad Consultancy Group President, BeamWorks Inc (2000-2006) Spark 400 Note: BeamWorks Ltd, an Israeli Based Company filed for Liquidation in
More informationTORX111 TORX111 FIBER OPTIC RECEIVING MODULE FOR APF. 1. Maximum Ratings (Ta = 25 C) FIBER OPTIC RECEIVING MODULE.
FIBER OPTIC RECEIVING MODULE TORX111 FIBER OPTIC RECEIVING MODULE FOR APF Unit: mm Non connector (connector less) type Data rate: DC to 6 Mb / s (NRZ code) Transmission distance: Up to 10 m (With TOTX111)
More informationSample board for USB DEVELOPPER KIT
Sample boards supporting several pressure modules including: - MS45xx family (on request only) - MS5536 - MS5540 / 5541 - MS5561 - MS5607 / 5611 - MS5637 - MS5803 - MS5805 - MS5806 2 connectors on board:
More informationMomentum Series. Printing System. Electronic Assembly Equipment
Electronic Assembly Equipment Momentum Series Printing System A proven high-performance printing platform - flexible, configurable, and easy to use, with speed and accuracy unmatched by any other printer
More informationP0201V05 ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only
More informationWiring Best Practices
Form Number F-2825 Issue Date Jan 3, 2018 Revision Date Jun 5, 2018 Wiring Best Practices Selecting, planning, and routing wires. Waterous Company 125 Hardman Avenue South South Saint Paul, MN 55075 (651)
More informationModel 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
More informationNewScope-7B Operating Manual
2016 SIMMCONN Labs, LLC All rights reserved NewScope-7B Operating Manual Preliminary May 13, 2017 NewScope-7B Operating Manual 1 Introduction... 3 1.1 Kit compatibility... 3 2 Initial Inspection... 4 3
More informationHV-CS kv Edge Mount Triaxial Jack
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley HV-CS-1589 3 kv Edge Mount Triaxial Jack Installation Information Description The Keithley Instruments
More informationWireless Access Point Server/Storage DIFF1 DIFF2
PCI-EXPRESS GEN 1, GEN 2, AND GEN 3 1:2 FAN-OUT CLOCK BUFFER Features PCI-Express Gen 1, Gen 2, and Gen 3 compliant devices Two low-power PCIe clock outputs Supports Serial-ATA (SATA) at 100 MHz No termination
More informationHeadset/Speaker EMI Filter with ESD Protection CM1416/D. Features. Product Description. Applications. ±30kV ESD protection on each channel per
Headset/Speaker EMI Filter with ESD Protection CM1416 Features Functionally and pin compatible with the CSPEMI201A and CM1411 OptiGuard coated for improved reliability at assembly Two channels of EMI filtering
More information