SPM0410HR5H-PB. "Mini" SiSonic TM Microphone Specification With MAX RF Protection - Halogen Free
|
|
|
- Darleen Eaton
- 6 years ago
- Views:
Transcription
1 "Mini" SiSonic TM Microphone Specification With MAX RF Protection - Halogen Free Knowles Acoustics 1151 Maplewood Drive Itasca, IL Sheet 1 of 10
2 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION "Mini" Surface Mount Silicon Microphone with MAX RF Protection - Halogen Free 1.2 APPLICATION Hand held telecommunication devices 2. PART MARKING Identification Number Convention S S: Manufacturing Location "S" - Knowles Electronics Suzhou Suzhou, China "No Alpha Character" - Knowles Electronics Itasca, IL USA "E" - Engineering Samples Digits 1-7: Job Identification Number 3. TEMPERATURE RANGE 3.1 Operating Temperature Range: -40 C to +100 C 3.2 Storage Temperature Range: -40 C to +100 C Sheet 2 of 10
3 4. ACOUSTIC & ELECTRICAL SPECIFICATIONS TEST CONDITIONS: +20 C, 60-70% R.H. SPM0410HR5H-PB 5. FREQUENCY RESPONSE CURVE Sheet 3 of 10
4 6. MECHANICAL SPECIFICATIONS "W" "H" "L" "AP" R0.254 R Note: Dimensions are in milimeters unless otherwise specified. Tolerance 0.15mm unless otherwise specified. Sheet 4 of 10
5 7. RECOMMENDED CUSTOMER LAND PATTERN (2X) (2X) 8. RECOMMENDED SOLDER STENCIL PATTERN N/A Sheet 5 of 10
6 9. RECOMMENDED INTERFACE CIRCUIT Sheet 6 of 10
7 10. PACKAGING DETAIL 12.0± ± ± ± A 0.30± ± ± ±0.10 R0.30 TYP. A ±0.10 PIN #1 COMPONENT ORIENTATION Note: Dimensions are in milimeters unless otherwise specified. Sheet 7 of 10
8 11. SOLDER FLOW PROFILE 12. ADDITIONAL NOTES (A) (B) (C) (D) (E) (F) Shelf life: Twelve (12) months when devices are to be stored in factory supplied, unopened ESD moisture sensitive bag under maximum environmental conditions of 30ºC, 70% R.H. MSL (moisture sensitivity level) Class 2a. Do not pull a vacuum over port hole of the microphone. Pulling a vacum over the port hole can damage the device. Do not board wash after the reflow process. Board washing and cleaning agents can damage the device. Do not expose to ultrasonic processing or cleaning. Do not brush board after the reflow process. Brushing the board with/without solvents can damage the device. Do not insert any object in port hole of device at any time as this can damage the device. Number of reflow - Recommend no more than 3 cycles. Sheet 8 of 10
9 13. RELIABILITY SPECIFICATIONS Note: After test conditions are performed, the sensitivity of the microphone shall not deviate more than 3dB from its initial value. Sheet 9 of 10
10 14. SPECIFICATION REVISIONS Revision Detailed Specification Changes Date E Updated to new format. (DMS) 8/14/2009 The information contained in this literature is based on our experience to date and is believed to be reliable and it is subject to change without notice. It is intended as a guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional requirements consult factory. This publication is not to be taken as a license to operate under, or recommendation to infringe any existing patents. This supersedes and voids all previous literature. Sheet 10 of 10
11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Knowles: SPM0410HR5H-PB
Digital "Mini" SiSonic TM Microphone Specification - Halogen Free. Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Digital "Mini" SiSonic TM Microphone Specification - Halogen Free Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 11 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION Digital "Mini" Surface
Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Enhanced RF Protected Amplified Mini SiSonic Microphone Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 1 of 10 1. DESCRIPTION AND APPLICATION 1.1 Description Mini Surface Mount Silicon
Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Zero Height SiSonic Microphone Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 1of 10 1. DESCRIPTION AND APPLICATION 1.1 Description Zero Height Surface Mount Silicon Microphone 1.2
MEMS Micro Joystick Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
MEMS Micro Joystick Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 9 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION KJ 33000 is an ultra low power MEMS (Micro Electro
KJ Joystick I 2 C Development Kit Programming and Application Note. Knowles Acoustics Maplewood Drive Itasca, IL 60143
Joystick I 2 C Development Kit Programming and Application Note KJ 33000 Installed within the Development Kit. Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 5 1. DESCRIPTION AND APPLICATION
CPC1824NTR. 4V Output Solar Cell INTEGRATED CIRCUITS DIVISION
4V Output Solar Cell Parameter Rating Units Open Circuit Voltage 4 V Short Circuit Current 00 ua * Direct sunlight (Approximately 6000 lux) Features 4V Output Triggers with Natural Sunlight Provides True
TransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
WM7133L. Bottom Port Analogue Silicon Microphone DESCRIPTION FEATURES APPLICATIONS
WM7133L Bottom Port Analogue Silicon Microphone DESCRIPTION The WM7133L is a lo-profile silicon analogue microphone. It offers high Signal to Noise Ratio (SNR) and lo poer consumption and is suited to
HSMF-C127. Data Sheet. Tri-Color Side-View ChipLED. Features. Description. Applications
Data Sheet HSMF-C127 Description The HSMF-C127 is a side-emitting tri-color RGB LED chipled. This surface-mount chipled is available in 3.2-mm 1.5-mm footprint. Its wide viewing angle allows good color
SIM800H_ Secondary Reflow SMT Guidelines _V1.01
SIM800H_ Secondary Reflow SMT Guidelines _V1.01 Document Title: SIM800H_ Secondary Reflow SMT Guidelines Version: 1.01 Date: 2014-5-6 Status: Release Document Control ID: SIM800H_ Secondary Reflow SMT
LCA701. Single Pole, Normally Open OptoMOS Relay INTEGRATED CIRCUITS DIVISION
Single Pole, Normally Open OptoMOS Relay Parameter Rating Units Blocking Voltage V P Load Current. A rms / A DC On-Resistance (max). Input Control Current ma Features V P Blocking Voltage Operational Temperature
MX877RTR. 8-Channel, 60V Driver with Push-Pull Output, 3 Wire Interface INTEGRATED CIRCUITS DIVISION. Features. Description.
8-Channel, 6V Driver with Push-Pull Output, 3 Wire Interface Features Eight (8) Outputs Rated at 6V, ±8mA Push-Pull Driver Configuration 6V to 6V Driver Supply Range 2.7V to 5.5V Logic Supply Range 3-Wire
LCA182STR. Single Pole, Normally Open OptMOS Relay INTEGRATED CIRCUITS DIVISION
Single Pole, Normally Open OptMOS Relay Parameter Rating Units Blocking Voltage 3 V P Load Current 12 ma rms / ma DC On-Resistance (max 3 Input Control Current.2 ma Features Very Low Input Control Current
AN-100 MEMS Microphone Handling and Assembly Guide
MEMS Microphone Handling and Assembly Guide PURPOSE AND SCOPE This document provides information and general guidelines for handling and assembling boards with InvenSense Micro Electro- Mechanical Systems
Product Tape and Reel, Solderability & Package Outline Specification
Manufacturing Note MN-001 Product Tape and Reel, Solderability & Package Outline Specification Contents 1. General Information 2. Tape and Reel / T&R 3. Package Outline Drawing / POD 4. Electro Static
LCA710STR. Single Pole, Normally Open OptMOS Relay INTEGRATED CIRCUITS DIVISION
LCA7 Single Pole, Normally Open OptMOS Relay Parameter Rating Units Blocking Voltage 6 V P Load Current A rms / A DC On-Resistance (max. Features Low On-Resistance:. High Current Handling Capability: A
LCA110LSTR. Single Pole, Normally Open OptoMOS Relay INTEGRATED CIRCUITS DIVISION
LCA11L Single Pole, Normally Open OptoMOS Relay Parameter Ratings Units Blocking Voltage 3 V P Load Current 12 ma rms & ma DC On-Resistance (max 3 Features Built-in Current Limiting 37V rms Input/Output
USB3740. High Speed Switch for Mobile and Portable Applications USB3740 PRODUCT FEATURES DATASHEET. USB3740 Block Diagram
USB3740 High Speed Switch for Mobile and Portable Applications PRODUCT FEATURES High Speed USB Mux for multiplexing the USB lanes between different functions Switch the USB connector between two different
LCA127LSTR. Single-Pole, Normally Open OptoMOS Relay INTEGRATED CIRCUITS DIVISION
Single-Pole, Normally Open OptoMOS Relay Parameter Ratings Units Blocking Voltage 2 V P Load Current 7 ma rms / ma DC On-Resistance (max Features Current Limiting 37V rms Input/Output Isolation Low Drive
PAA191STR. Dual Single-Pole, Normally Open OptoMOS Relays INTEGRATED CIRCUITS DIVISION
Dual Single-Pole, Normally Open OptoMOS Relays Parameter Rating Units Load Voltage 4 V P Load Current ma rms / ma DC On-Resistance (max 8 Features V rms Input/Output Isolation Low Drive Power Requirements
SiSonic FLEX Evaluation Kit KAS USER GUIDE.
Contents 1. Digital to Analog Converter (DAC) PCB 2. Mic-On-Flex Assemblies (10 Total) 3. Adapter PCBs (Digital and Analog) 1 2 3 Description The evaluation kit allows for simple and easy evaluation of
LCA127STR. Single-Pole, Normally Open OptoMOS Relay INTEGRATED CIRCUITS DIVISION
Single-Pole, Normally Open OptoMOS Relay Parameter Ratings Units Blocking Voltage V P Load Current ma rms / ma DC On-Resistance (max Features 37V rms Input/Output Isolation Low Drive Power Requirements
AKU142 Top Port, Analog Silicon MEMS Microphone
AKU142 AKU142 Top Port, Part number(s) Package type AKU142 Data sheet revision 1.03 4-pin LGA top port Release date 21 October 2014 Document number Notes DS32-1.03 AKU142 Specifications are subject to
HSMF-C116. Ultra Small Surface Mount Tricolor ChipLED. Data Sheet. Features. Description. Applications. Package Dimensions. Pin4. Pin1. Pin1.
Ultra Small Surface Mount Tricolor ChipLED Description This ultra-small tricolor chipled is designed for close pitch assembly and also for portable and wearables applications. The package uses high intensity
Model XDL S Rev A
Delay Line DESCRIPTION The XDL15-3-030S can be used in amplifier linearization applications from 135 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading to obtain longer delay. The Xinger
PRTR5V0U2X Ultra low capacitance double rail-to-rail ESD protection diode Rev January 2008 Product data sheet
Rev. 02 14 January 2008 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance rail-to-rail ElectroStatic Discharge (ESD) protection diode in a small SOT143B Surface-Mounted
AKU143 Top Port, Analog Silicon MEMS Microphone
AKU143 AKU143 Top Port, Part number(s) Package type AKU143 4-pin LGA top port Data sheet revision 1.01 Release date 12 December 2014 Document number Notes DS37-1.01 AKU143 Specifications are subject to
CPC1510GSTR. Single-Pole, Normally Open Relay with Integrated Current Limit INTEGRATED CIRCUITS DIVISION. Description
CPC Single-Pole, Normally Open Relay with Integrated Current Limit Parameter Rating Units Blocking Voltage 2 V P Load Current 2 ma rms / ma DC On-Resistance (max Features Integrated Active Current-Limit
AKU342 Bottom port, Analog Silicon MEMS Microphone
Bottom port, Part number(s) Package type Data sheet revision 1.04 6-pin LGA bottom port Release date 10 October 2014 Document number Notes DS28-1.04 Specifications are subject to change without notice.
PAA140STR. Dual Single-Pole, Normally Open OptoMOS Relays INTEGRATED CIRCUITS DIVISION
Dual Single-Pole, Normally Open OptoMOS Relays Parameter Rating Units Load Voltage 4 V Load Current ma rms / ma DC On-Resistance (max 8 Features 37V rms Input/Output Isolation Low Drive Power Requirements
SKY LF: 2.4 to 2.5 GHz SP3T Switch
DATA SHEET SKY13586-678LF: 2.4 to 2.5 GHz SP3T Switch Applications 802.11 a/b/g/n/ac WLAN networks Bluetooth systems Smartphones Connectivity modules RF1 RF2 RFC Features Positive low voltage control:
CPC1540GSTR. Features Integrated Active Current-Limit Protection Thermal Shutdown Guaranteed Turn-On: 2mA Input Control Current 350V P
Single-Pole, Normally Open OptoMOS Relay with Integrated Current Limit and Thermal Shutdown Parameter Rating Units Load Voltage 350 V P Load Current 120 ma Maximum On-Resistance 25 Input Control Current
AKU344 Bottom Port, Analog Silicon MEMS Microphone
AKU344 AKU344 Bottom Port, Part number(s) Package type AKU344 Data sheet revision 1.01 LGA, bottom port, metal lid Release date 12 December 2014 Document number Notes DS36-1.01 AKU344 Specifications are
SIM800H&L_ Secondary Reflow SMT _Guidelines_V1.00
SIM800H&L_ Secondary Reflow SMT _Guidelines_V1.00 Document Title: SIM800H&L_ Secondary Reflow SMT_Guidelines Version: 1.00 Date: 2013-08-30 Status: Document Control ID: Release SIM800H&L_ Secondary Reflow
Chip Phototransistor with Right Angle Lens EAPSV3010A0
Features Fast response time High photo sensitivity Small junction capacitance Package in 8mm tape on 7 diameter reels. Pb free The product itself will remain within RoHS compliant version. Compliance with
RClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
3SM122HZB1VA MEMS Microphone
Product Description The microphones are integrated with specialized pre-amplification ASIC to provide high sensitivity, high SNR output from a capacitive audio sensor. It s packaged for surface mounting
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
ESDA8P80-1U1M. High power transient voltage suppressor. Description. Features. Applications
High power transient voltage suppressor Description Datasheet - production data The ESDA8P80-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
Product Tape and Reel, Solderability & Package Outline Specification
Manufacturing Note MN-001 Product Tape and Reel, Solderability & Package Outline Specification Contents 1. General Information 2. Tape and Reel / T&R 3. Package Outline Drawing / POD 4. Electro Static
PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open
PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open Rev. 4 8 November 2010 Product data sheet 1. Product profile 1.1 General description 500 ma PNP Resistor-Equipped Transistor (RET)
REFLOW SOLDERING AND BOARD ASSEMBLY
MEMS Microphone Handling and Assembly Guide PURPOSE AND SCOPE This document provides information and general guidelines for handling and assembling boards with InvenSense Micro Electro- Mechanical Systems
Specification of Analog MEMS Microphone
Specification of Analog MEMS Microphone RoHS Compliance & Halogen Free Model: SA11BA383-Y21 Eng.No:SA1602007 Designed By: Ester 02.22 Checked By: Richard 02.22 Approved By: Nina 02.22 Customer: P/N of
GRF6011. Preliminary. SPDT Failsafe Switch GHz. Product Description. Features. Applications
Product Description Features Path: RFC to RF1: (1.9 GHz); Vdd: 3.3V Insertion Loss: 0.43 db IP1dB: 32.0 dbm IIP3: 49.5 dbm is linear, ultra-low loss SPDT switch that has been designed with failsafe characteristics
VM1000 Low Noise Bottom Port Analog Single-Ended Piezoelectric MEMS Microphone
GENERAL DESCRIPTION Vesper presents the world s first piezoelectric MEMS microphone. The provides superior performance and quality in all environments. The is a low noise, high dynamic range, single-ended
Low-Noise Bottom Port Piezoelectric MEMS Microphone
Low-Noise Bottom Port Piezoelectric MEMS Microphone Data Sheet PMM-3738-VM1000-R PUI Audio, featuring Vesper s exclusive technology, presents the world s first and only piezoelectric MEMS microphone. The
PM1206STR. AC Power Switch INTEGRATED CIRCUITS DIVISION
AC Power Switch Parameter Rating Units AC Operating Voltage 26 V rms Load Current 5 ma rms On-State Voltage Drop (I L =5mA rms ) 1.4 V rms Features Load Current up to.5a rms Blocking Voltages up to 6V
SKY LF: GHz Dual SPDT Crossed Switch
DATA SHEET SKY13354-368LF: 0.1-3.0 GHz Dual SPDT Crossed Switch Applications Cellular infrastructures Features Broadband frequency range: 0.1 GHz to 3.0 GHz Positive voltage control: 1.6 V to 5.0 V Low
CPC2025NTR. 400V Dual Normally-Open Single-Pole 8-Pin SOIC OptoMOS Relay INTEGRATED CIRCUITS DIVISION
4V Dual Normally-Open Single-Pole 8-Pin SOIC OptoMOS Relay Parameter Rating Units Blocking Voltage 4 V P Current 1 ma rms / ma DC On-Resistance (max) LED Forward Current (to Activate) 2 ma Features V rms
TQQ MHz LTE Band 3 Uplink BAW Filter
Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss
SKY LF: GHz SP3T Switch
DATA SHEET SKY13373-460LF: 0.1-6.0 GHz SP3T Switch Applications WCDMA band and mode switching Antenna switch for multimode systems 802.11a/b/g/n WLANs Features Broadband frequency range: 0.1 to 6.0 GHz
RClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
CPC1511Y. Single-Pole, Normally Open Relay with Thermal Shutdown & Current Limiting INTEGRATED CIRCUITS DIVISION. Description
Single-Pole, Normally Open Relay with Thermal Shutdown & Current Limiting Parameter Rating Units Blocking Voltage 23 V P Load Current 4 ma DC /ma rms On-Resistance (max 4 Features Integrated Active Current-Limit
Omnidirectional Microphone with Bottom Port and Analog Output ADMP401
FEATURES 4.72 mm 3.76 mm 1.0 mm surface-mount package High SNR of 62 dba Sensitivity of 42 dbv Flat frequency response from 100 Hz to 15 khz Low current consumption of
MPXHZ6130A, 15 to 130 kpa, Absolute, Integrated Pressure Sensor
Freescale Semiconductor Document Number: Data Sheet: Technical Data Rev. 1.2, 06/2015, 15 to 130 kpa, Absolute, Integrated Pressure Sensor The series sensor integrates on-chip, bipolar op amp circuitry
Smart Card Bridge to Full-Speed USB, SPI, and UART Interfaces
SEC00/SEC200 Bridge to Full-Speed USB, SPI, and UART Interfaces PRODUCT FEATURES Data Brief General Description The SEC00 and SEC200 provide a single-chip solution for a bridge to USB, SPI, and UART interfaces.
PESD0402MS05 Surface Mount Polymeric ESD Suppressor
\ Description polymeric ESD suppressor help protect sensitive electronic equipment against electrostatic discharge (ESD) without distorting data signals. This protection is a result of its ultra-low capacitance
CPC1964BX6. Rapid Turn-On AC Power Switch INTEGRATED CIRCUITS DIVISION. Description. Features. Approvals. Ordering Information.
Rapid Turn-On AC Power Switch Parameter Rating Units AC Operating Voltage - 24 V rms Load Current 1. A rms On-State Voltage Drop 1.4 V P (at = 1.A P Blocking Voltage 6 V P Features Load Current up to 1.A
AS179-92LF: 20 MHz to 4.0 GHz GaAs SPDT Switch
DATA SHEET AS179-92LF: 20 MHz to 4.0 GHz GaAs SPDT Switch Applications General purpose medium-power switches in telecommunication applications Transmit/receive switches in 802.11 b/g WLAN Bluetooth systems
Data sheet AKU142 Analog, Silicon MEMS Microphone
AKU142 Analog, Silicon MEMS Microphone AKU142 - Data Sheet Package type 4-pad LGA top port, L2L Document revision 1.1a Document release date 29 June 2016 Document number AKU-AKU142-DS32 Technical Reference
LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR44 - White Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 3 / 35 12 Volt Applications Automotive Indoor
RFSA2023TR7. Voltage Controlled Attenuator. Product Overview. Key Features. Functional Block Diagram Applications. Ordering Information
Product Overview Qorvo's is a fully monolithic analog voltage control attenuator (VCA) featuring exceptional linearity over 30dB adjustment range with on-chip temperature compensation. incorporates a revolutionary
Specification of Analog MEMS Microphone
Specification of Analog MEMS Microphone RoHS Compliance & Halogen Free Waterproof MEMS Microphone Model: SA04BA383-V21 Eng.No:SA1602011 Designed By: A a r o n 0 7. 0 2 Checked By: E s t e r 0 7. 0 2 Approved
Aluminum Electrolytic Capacitors Axial Standard Miniature
Aluminum Electrolytic Capacitors Axial Standard Miniature 041/043 ASH high voltage lower longer life 117 ASD CV-values 138 AML 105 C Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø
3SM102EZT13C MEMS Microphone
Product Description The brings excellent performance on the applications of ANC headphone, TWS headset, Beam-forming device and Voice Recognition device by the unique features of tiny package size, flat
MP3V5050V, -50 to 0 kpa, Gauge Pressure Sensor
Freescale Semiconductor Document Number: Data Sheet: Technical Data Rev. 3.0, 09/2015, -50 to 0 kpa, Gauge Pressure Sensor The piezoresistive transducer is a state-of-the-art, monolithic, signal conditioned,
PS2601 AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage 26 V rms Load Current 1 A rms On-State Voltage Drop (I L =1A rms 1.2 V rms Features Load Current up to 1A rms (3A rms with heat sink Blocking
Application Note AN-1028 Design, Integration and Rework Guidelines for BGA and LGA Packages
Application Note AN-1028 Design, Integration and Rework Guidelines for BGA and LGA Packages Table of Contents Page Design considerations...2 Substrate...2 PCB layout...2 Solder mask openings...3 Terminations...4
Common mode filter with ESD protection for high speed serial interface
Common mode filter with ESD protection for high speed serial interface Datasheet - production data µqfn-10l 2.60 x 1.35 mm Description The is a highly integrated common mode filter and low pass filter
300 V, 100 ma PNP high-voltage transistor
SOT89 Rev. 6 27 September 2011 Product data sheet 1. Product profile 1.1 General description PNP high-voltage transistor in a medium power and flat lead SOT89 (SC-62) Surface-Mounted Device (SMD) plastic
3mm Advanced Super Flux LEDs T4C-4PRB
3mm Advanced Super Flux LEDs Lead (Pb) Free Product - RoHS Compliant Feature RoHS compliant. Piranha package. Colorless clear resin. Low thermal resistance Packaged in tubes for Automatic Insertion Equipment.
AN I 2 S/TDM Output MEMS Microphone Flex Evaluation Boards
I S/TDM Output MEMS Microphone Flex Evaluation Boards GENERAL DESCRIPTION This user guide applies to the following MEMS microphone evaluation boards: EV_INMP FX EV_ICS FX EV_ICS 000 FX These are simple
CPC1563GSTR INTEGRATED CIRCUITS DIVISION
Single-Pole, Normally Open OptoMOS Relay Integrated Current Limit with Voltage and Thermal Protection Parameter Rating Units Load Voltage 600 V P Load Current ±120 ma On-Resistance (max) 35 Input Control
MPXH6300A, 20 to 300 kpa, Absolute, Integrated, Pressure Sensor
Freescale Semiconductor Document Number: Data Sheet: Technical Data Rev. 6.0, 09/2015, 20 to 300 kpa, Absolute, Integrated, Pressure Sensor Freescale's series sensor integrates on-chip, bipolar op amp
Ultra low capacitance ESD protection for Ethernet ports. ESD protection high-frequency AC-coupled Ethernet ports
Rev. 3 17 June 2010 Product data sheet 1. Product profile 1.1 General description The is designed to protect Input/Output (I/O) ports that are sensitive to capacitive loads, such as Ethernet, from destruction
AKU440 Family Bottom Port, Digital Silicon MEMS Microphones
AKU440 Family AKU440 Family Bottom Port, Part number(s) Package type Data sheet revision 1.0 AKU440, AKU441, AKU442* 5-pin LGA bottom port Release date 06 November 2014 Document number Notes DS46-1.0 AKU440
GRF2072. Preliminary. Ultra-Low Noise Amplifier Tuning Range: GHz. Product Description. Features. Applications
Product Description Features Reference: 5V/70mA/2.5 GHz Gain: 19.8 db Eval Board NF: 0.55 db OP1dB: 20.0 dbm OIP3: 37.5 dbm Flexible Bias Voltage and Current Process: GaAs phemt is a broadband, linear,
Obsolete Product(s) - Obsolete Product(s)
8 line low capacitance EMI filter and ESD protection Main product characteristics Where EMI filtering in ESD sensitive equipment is required: LCD and camera for mobile phones Computers and printers Communication
SKY LF: 20 MHz to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKY13587-378LF: 2 MHz to 6. GHz GaAs SPDT Switch Applications WLAN 82.11 a/b/g/n networks Low power transmit/receive systems INPUT Industrial IoT Lighting OUTPUT1 OUTPUT2 Smart energy Connected
Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Bottom Contact WR-FPC
![Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Bottom Contact WR-FPC](/thumbs/75/71576821.jpg "Dimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Bottom Contact WR-FPC")
Dimensions: [mm] Recommended Land Pattern: [mm] 0,96 pl ±0,15 3,28 0,50 0,30 1,20 1 End 1 End 0,20 ±0,05 0,50 ±0,15 3,00 L ±0,15 2,10 ±0,15 2,70 General tolerance ±0,05 Pl h 0,13 Pl Pl ±0,10 L1 ±0,10 0,80
SKY LF: 2.4 to 2.5 GHz SP3T Switch
DATA SHEET SKY13586-678LF: 2.4 to 2.5 GHz SP3T Switch Applications 802.11 a/b/g/n/ac WLAN networks Bluetooth systems Smartphones Connectivity modules RF1 RF2 RFC Features Positive low voltage control:
RClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
Specification Status: RELEASED
PAGE NO.: 1 OF 6 Specification Status: RELEASED BENEFITS Low capacitance; provides low insertion loss for high speed data signals Small size ESD protection diodes for high speed data signals (0201 size
SKY33108: BAW GHz WiFi Pass/ GHz WiMAX Reject Filter
preliminary data sheet SKY3318: BAW 2.4 2.473 GHz WiFi Pass/ 2.495 2.69 GHz WiMAX Reject Filter Applications l 2.5 GHz WiMAX PCMCIA cards USB dongles CPE Notebook and ultra mobile PC Pico and Femto base
MADR TR. SPDT PIN Diode Driver Rev. V3. Features. Functional Block Diagram. Description. Pin Configuration. Ordering Information
Features Moderate Speed, CMOS Technology (25 ns) Complementary Outputs High Drive Current Capability (± 50 ) Low Current Consumption Plastic SOIC Body for SMT Applications Tape and Reel Packaging Available
Data sheet AKU340 Analog, Silicon MEMS Microphone
AKU340 Analog, Silicon MEMS Microphone AKU340 - Datasheet Package type 5-pad LGA, bottom port, metal lid Document revision 1.1a Document release date 29 June 2016 Document number AKU-AKU340-DS26 Technical
RClamp3324P. Low Capacitance RailClamp 4-Line Surge and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Low Capacitance RailClamp 4-Line Surge and ESD Protection PROTECTION PRODUCTS Description RailClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage
GRF2505. Released. Broadband LNA/Linear Driver 4.0 to 6.0 GHz. Product Description. Features. Applications
Product Description is a broadband, ultra-low noise, linear amplifier offering the highest levels of performance for demanding 802.11ac and wireless backhaul LNA and PA driver applications. Features Reference:
TQM4M9073 Through Line
Applications General Purpose Wireless RF bypass paths Microwave Radio Test & Measurement Scientific Instruments 16-pin 3x3mm leadless SMT package Product Features Functional Block Diagram DC 6 GHz 50 ohm
ISL MMIC Silicon Bipolar Broadband Amplifier. Features. Ordering Information. Applications. Typical Application Circuit
ISL55 Data Sheet August 25, 1 FN258.2 MMIC Silicon Bipolar Broadband Amplifier The ISL55 is a high performance gain block featuring a Darlington configuration using high f T transistors and excellent thermal
M C C. ESDLC3603P3. Features Low Capacitance 0.4pF typical(i/o to I/O) Low operating Voltage: 5.0 V Low clamping voltage
Features Low Capacitance 0.4pF typical(i/o to I/O) Low operating Voltage: 5.0 V Low clamping voltage IEC61000 4 4 (EFT) 40A (5/50ns) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level
SKY LF: 0.1 to 3.0 GHz GaAs SPDT Switch
DATA SHEET SKY13323-378LF:.1 to 3. GHz GaAs SPDT Switch Applications WLAN 82.11 b/g networks WLAN repeaters INPUT ISM band radios Low power transmit receive systems OUTPUT1 OUTPUT2 Features Positive voltage
SKY LF: 0.1 to 6.0 GHz High-Isolation SPDT Absorptive Switch
DATA SHEET SKY13372-467LF:.1 to 6. GHz High-Isolation SPDT Absorptive Switch Applications GSM, PCS, WCDMA base stations 2.4 and 5.8 GHz ISM devices Wireless local loops J1 CBL Features 5 Single, positive
2PB709ARL; 2PB709ASL
Rev. 01 12 November 2008 Product data sheet 1. Product profile 1.1 General description PNP general-purpose transistors in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package. Table 1.
AKU240 Family Top port, Digital Silicon MEMS Microphones
AKU240 Family AKU240 Family Top port, Part number(s) Package type Data sheet revision 1.01 AKU240, AKU241, AKU242 8-pin LGA top port Release date 23 December 2014 Document number Notes DS45-1.01 AKU240
Passive MMIC 60GHz Equalizer
Page 1 The is a passive MMIC equalizer. It is a positive gain slope equalizer designed to pass DC to 60GHz. Equalization can be applied to reduce low pass filtering effects in both RF/microwave and high
Specification Status: RELEASED
PAGE NO.: 1 OF 6 BENEFITS Specification Status: RELEASED Industry-leading lowest capacitance; provides lowest insertion loss for high speed data signals Small size ESD protection diodes for high speed
3SM102E4T12A MEMS Microphone
MEMS Microphone Product Description The is a monolithic MEMS top performing miniature analog microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit
8-line IPAD low capacitance EMI filter and ESD protection in QFN package
Datasheet 8-line IPAD low capacitance EMI filter and ESD protection in QFN package Features 1 QFN 16L 3.3 mm x 1.5 mm (bottom view) 100 Ω Input 1 Output 1 C = 22.5 pf C = 22.5 pf Typical line capacitance
Cree LED Lamp Soldering & Handling
Cree LED Lamp Soldering & Handling This application note applies to the following products: P4 LEDs Surface-mount PLCC LEDs For XLamp LED soldering and handling information, refer to the XLamp Soldering