pmvmounts.co.uk PMVSHORTTHROW Short Throw Projector Mount General Specification: +/- 40mm Fine Length Adjustment

Transcription

1 PMVSHORTTHROW Short Throw Projector Mount Height Adjustable Wall Plate Enables adjustment of 100 Dims H 215 x W 130 Height to /- 40 Fine Length Adjustment +/- 5 Fine Adjustment with integrated spirit level 4-point Fine Vernier Adjustment 100 Height Adjustment at the wall plate Adjustable Boom Arm Extends from 842 to a max of 1530 with mounting centres from 735 up to 1420 Fits all mainstream and major brand short throw projectors with a throw ratio between 0.3 and 0.9. Maximum fixing points 300 x 300 Integral Cable Management Cables run through boom arm when closed or extended Fine Length Adjustment +/-40 of fine length adjustment Enables finite levelling with integrated level marker Large 200x200 mounting plate. maximum fixing points to 300x Min / 1530 Max 735 Min / 1420 Max 215

2 PMVSHORTTHROW2 Medium Short Throw Projector Mount 345 to 660 +/- 35 Fine Adjustment +/- 5 Fine Adjustment with integrated spirit level Fine Vernier Adjustment Extendable Boom Arm Boom arm can be extended from 460 up to 775. Mounting plate centres are therefore /- 35 for fine adjustment. Integral Cable Management Cables run through boom arm Height Adjustable Wall Plate Enables adjustment of 100 Dims H 215 x W 130 Height Height Adjustment at the wall plate Unit Weight - 4.5Kgs Fits all mainstream and major brand short throw projectors with a throw ratio between 0.20 and Min 345 Min +/- 35 Includes extension arms to increase maximum fixing points 300 x Max 660 Max +/- 35 Large 200x200 mounting plate. maximum fixing points to 300 x 300 Enables finite levelling with integrated level marker

3 PMVULTRASHORT Ultra Short Throw Projector Mount 185 to 390 throw length (centre of fixing plate) maximum reach of fixing arms +/- 100 Fine length adjustment +/- 5 Fine Adjustment with integrated spirit level Throw Distance (projector dependent) Fine adjustment along the full length of the boom arm 4-point Fine vernier adjustment, tilt and yaw Fits all mainstream and major brand ultra short throw projectors with a throw ratio less than 0.3 Maximum fixing points 300 x 300 Fine Length Adjustment over 200 of fine length adjustment along boom arm Max Large 200x200 mounting plate. maximum fixing points to 300x300 Enables finite levelling with integrated level marker Max Min 185 / Max 390 +/ Ø8

4 PMVSECURITYMNT Tamper Proof Security Short Throw Projector Mount Low Profile Wall Plate Cables can be passed into the boom through a cavity within the wall plate 200 to Features to 675 Throw Distance (centre of mounting plate) Full movement available along 790 boom arm. +/- 5 Fine Adjustment with integrated spirit level 4-point Fine Vernier Adjustment Fits all mainstream and major brand short throw projectors via 200 x universal interface plate, extension arms come with the fixing kit giving up 300 x 300 Tamper proof design including security fittings. Projector cannot be adjusted or removed without included tool. No sharp edges or crevices. Cable knock outs only removable before assembly. Long Reach Boom Arm Useable throw length of along the 800 boom arm. Tamper Proof Fixings Special tool required to open allow access to projector adjustments and mounting points All fine level adjustments are enclosed within security box Integral Cable Management Cables run through boom 200 Max 200 Max Large 200x200 mounting plate. maximum fixing points to 300x300 as on other PMV Short Throw Mounts Min / 675 Max

5 PMVmounts Short Throw Projector Mounts Range of Mounts to suit all Short Throw Projectors General Specification for all PMV Short Throw mounts: Projectors can be mounted up against the wall or up to 1.46metres away (centre of mount) All mounts offer +/- 5 Fine Adjustment with integrated spirit level 4-point Fine Vernier Adjustment to setup tilt, yaw and pitch. Screen Size Calculation: Projector lens to Screen face distance Throw Ratio of the projector Screen Size Calculation: D Distance R Ratio W Width Width of screen Throw Distance Throw Ratio = Screen Width Note: Projector dimensions are given in millimetres. Screen sizes are often in inches. 1 centimetre = inch 1 inch = 2.54 centimetres max weight loading on all mounts Durable gloss white powdercoat finish All mounts feature a 200 x 200 universal mounting plate, also included in the fixing kit are small extension arms to increase maximum mounting size to 300 x :3 = Screen Width 4 x 3 = Screen Height Width² + Height² = Diagonal Screen Size 16:9 = Screen Width 16 x 9 = Screen Height Width² + Height² = Diagonal Screen Size Projector Mount PMVSHORTTHROW PMVSHORTTHROW2 Boom Length Throw Length (Centre of fixing plate) Fine Length Adjustment Maximum Fixing Points Wall Plate Profile / X X / X X 215 Listed Projectors will give a screen size between " or more Casio - XJ-ST145, XJ-ST155 Sanyo - PLCWL2501, PLCWL2503 Panasonic - PT-TW230EA, PT-TW231REA NEC - M260XS, M300XS, M350XS, M260WS, M300WS, U250X, U300X Hitachi - ED-A220NM, IPJ-AW250NM, CP-D10, CP-AW250N, CP-A300NM Optoma - EW533ST, EW605ST, EW610ST, EX605ST, EX610ST, EX665UT Mitsubishi - EX320ST, EW230ST, XD360U-EST, WD380U-EST ViewSonic - PJD5353, PJD7383, PJD7383I, PJD7583W, PJD7583WI Sony - VPL-SW535, VPL-SX535, VPL-SX125, VPL-SW125 Sanyo - PDG-DXL2000, PDG-WL2500 Panasonic - PT-CW230EA, PT-CX200EA NEC - U250X, U300X, U260W, U310W Hitachi - ED-A220NM, IPJ-AW250NM, CP-D10, CP-AW250N, CP-A300NM Optoma - EW605ST, EW610ST, EW675UT, EX665UT Mitsubishi - EW230ST, XD360U-EST, WD380U-EST ViewSonic - PJD7583W, PJD7583WI Sony - VPL-SW535, VPL-SX535 PMVULTRASHORT / X X 135 Sanyo - PDG-DWL2500, PDG-DXL2000 Panasonic - PT-CW230EA, PT-CX200EA NEC - Hitachi - U250X, U300X, U260W, U310W ED-A220NM, IPJ-AW250NM, CP-AW250N,CP-A300NM Optoma - EW675UT, EX665UT Sony - VPL-SW535, VPL-SX535 PMVSECURITYMNT Full length of boom 300 X X 150 Sanyo - PLCWL2501, PLCWL2503, PDG-DWL2500, PDG-DXL2000 Panasonic - PT-CW230EA, PT-CX200EA, PT-TW230EA, PT-TW231REA NEC - M260XS, M300XS, M350XS, M260WS, M300WS, U250X, U300X, U260W, U310W Hitachi - ED-A220NM, IPJ-AW250NM, CP-D10, CP-AW250N, CP-A300NM Optoma - EW605ST, EW610ST, EW675UT, EX665UT Mitsubishi - EW230ST, XD360U-EST, WD380U-EST ViewSonic - PJD7583W, PJD7583WI Sony - VPL-SW535, VPL-SX535 For compatability quiries contact PMVmounts: daniel@pmvmounts.co.uk /

6 PMVmounts Short Throw - Screen Size Chart Size Chart offering Min & Max screen size per projector & Mount combination Short Throw Projectors PMVmounts Short Throw Projector Mount Options Brand Model Throw Ratio PMVSHORTTHROW PMVSHORTTHROW2 PMVULTRASHORT PMVSECURITYMNT Min Max Min Max Min Max Min Max Casio XJST145EJ 0.68 : XJST155EJ 0.68 : Sanyo PLCWL : PLCWL : PDGDWL : PDGDXL : Panasonic PT-TW230EA 0.50 : PT-TW231REA 0.50 : PT-CW230EA 0.19 : PT-CX200EA 0.24 : NEC M260XS 0.47 : M300XS 0.47 : M350XS 0.47 : M260WS 0.47 : M300WS 0.47 : U250X : U300X : U260W 0.3 : U310W 0.3 : Hitachi ED-AW100N 82cm Needs PMVMOUNTECHAW1 due to unique mounting angle/distance ED-AW110N 82cm Needs PMVMOUNTECHAW1 due to unique mounting angle/distance ED-A220NM 0.3 : IPJ-AW250NM 0.3 : CP-D : CP-AW100N 0.37 : 1 Needs PMVMOUNTECHAW1 due to unique mounting angle/distance CP-AW250N 0.3 : CP-A300NM 0.3 : Optoma EW533ST 0.72 : EW605ST 0.52 : EW610ST 0.52 : EW675UT : EX605ST : EX610ST : EX665UT EPSON EB-440W 0.37 : EB-450W 0.37 : EB-450Wi 0.37 : EB-455Wi 0.37 : EB : EB-460i 0.37 : EB-465i 0.37 : Mitsubishi EX320ST 0.6 : EW230ST 0.5 : XD360U-EST : WD380U-EST : ViewSonic PJD : PJD : PJD7383I 0.61 : PJD7583W 0.5 : PJD7583WI 0.5 : Sony VPL-SW : VPL-SX : VPL-SX : VPL-SW : Ÿ Minimum and Maximum screen size available (and any size in between). Ÿ All sizes are diagonal, in inches and 4:3 screen ratio. Ÿ Sizes are calculated to the centre of the projector mounting plate, consideration should be given to the type of projector, its lens location and size. Ÿ All sizes are accurate to the centre of the mounting plate but should be used as a guide only. Ÿ For an accurate estimate contact info@pmvmounts.co.uk