LDL2 Series. LDL2 Direct Illumination Bar Lights. 277 A Total of Models. Wide Range of Variations. CCS Inc. Patented Design Registered

Size: px

Start display at page:

Download "LDL2 Series. LDL2 Direct Illumination Bar Lights. 277 A Total of Models. Wide Range of Variations. CCS Inc. Patented Design Registered"

Norman Hubbard
5 years ago
Views:

1 LDL2 Series LDL2 Direct Illumination Bar Lights Patented Design Registered Wide Range of Variations 277 A Total of s CCS Inc.

2 Bar Light Units with Sophisticated High Performance: LDL2 Series Wide Product Lineup with 277 Variations * Includes customized products. A Total of 277 s The standard LDL2 Series lineup includes models with a lightemitting surface from a compact 33 mm 8 mm to a wide 2 mm mm. In addition, up to 2 customized models are available. Various combinations of size, color, and directional characteristics can be selected from a total of 277 models. s with mmwide Lightemitting Surface Sizes Lightemitting surface: 4 mm Up to 9 mm max. Light Color Directional Characteristics mm Standard products Special order sizes 4 colors 2 types Total of 4 models s with mmwide Lightemitting Surface Sizes Lightemitting surface: 2 mm Up to mm max. Light Color Directional Characteristics mm Standard products Special order sizes 4 colors 2 types Total of 8 models s with 8mmwide Lightemitting Surface Sizes 8 mm Lightemitting surface: 33 mm Standard products size Light Color Infrared Directional Characteristics 5 colors type Total of 5 models

s with Either Narrow and Wide Directional Characteristics Can Be Selected Two types of models are available with different directional

Directional Characteristics of Narrow s Enlargement of Lightemitting Surface Original lens Relative irradiation strength 0.5 0.5 0 0 0.

Enlargement of Lightemitting Surface Relative irradiation strength 0.5 0 0.

5 Angle (degrees) * Actual measurement using a model with mmwide lightemitting surface Free Selection of Mounting to Match Your Site

mounting or tapped mounting holes. s for which you can adjust the angle of irradiation are available to mount the Light Units.

The angle of irradiation can be adjusted when using surrounding emission from four directions.

internal grooves in the frame structure. * The LDL233 8 Series provides only tap holes for installation.

This improves the efficiency of heat dissipation and reduces the rise in temperature of the LED mounting section.

Common Power Supply for All Colors The same power supply can be used for all Light Units regardless of color.

The Compact LDL233 8 Helps You Save Space Lightweight, compact designs lend themselves to installation in tight equipment spaces,

3 s with Either Narrow and Wide Directional Characteristics Can Be Selected Two types of models are available with different directional characteristics: narrow models, which use an original lens, and wide models, which have diffuse illumination over a wide range. Directional Characteristics of Narrow s Enlargement of Lightemitting Surface Original lens Relative irradiation strength Angle (degrees) * Actual measurement using a model with mmwide lightemitting surface Directional Characteristics of Wide s Enlargement of Lightemitting Surface Relative irradiation strength Angle (degrees) * Actual measurement using a model with mmwide lightemitting surface Free Selection of Mounting to Match Your Site Environment You can select from two methods for greater mounting versatility to match your installation environments: frame structure mounting or tapped mounting holes. s for which you can adjust the angle of irradiation are available to mount the Light Units. Frame structure BKLDL2 BKLDQ2 series Tapped mounting holes Cable end The cable lies flat to the mounting surface, and so mounting can be made to any surface. The angle of irradiation can be adjusted for a variety of methods, such as for parallel emission from two directions. The angle of irradiation can be adjusted when using surrounding emission from four directions. With frame structure mounting, the lighting position and mounting location can be adjusted by sliding the mounting nuts into the internal grooves in the frame structure. * The LDL233 8 Series provides only tap holes for installation Highefficiency Heat Dissipation The heat radiating fins and the frame structure significantly increases the surface area. This improves the efficiency of heat dissipation and reduces the rise in temperature of the LED mounting section. This heat dissipation structure reduces the strain on the LEDs and enables a long and stable performance of the Light Unit. Common Power Supply for All Colors The same power supply can be used for all Light Units regardless of color. Although previously 2 V was used only for red light, the voltage is now for all colors. The Compact LDL233 8 Helps You Save Space Lightweight, compact designs lend themselves to installation in tight equipment spaces, contributing to saving space onsite. Features The LDL233 8series Compact Bar Light Units have a lightweight and compact design weighing only g. Infrared light is also available in addition to red, white, blue, and green light. s and s are available. Widetype directional characteristics are provided. Use the tap holes on the ends or on the back for mounting. A special bracket is also available. BKLDQ233 8 Directional Characteristics Relative irradiation strength Angle (degrees) 3 mm 44 mm Weighs only g Application Examples Bar Light Units can be used to supplement other illumination devices and can be installed in small spaces. 2

4 Supported Options s, s, and s of various sizes are available. They can be easily mounted by inserting them in the grooves on the sides of the Light Units. s for which you can adjust the angle of irradiation are also available. * The LDL233 8series Bar Light Units are mounted with screws. DFLDL2 Series PLLDL2 Series CVLDL2 Series For the LDL233X8 Series For the LDL233X8 Series Design Registered Three, M2, slimhead screws (including one spare screw) Three, M2, slimhead screws (including one spare screw) Design Registered The irradiated light is diffused to suppress workpiece glare and reflections. * This option is not effective with infrared light. This plate polarizes the light. Prevent light reflection by using the together with the Polarizing Filter (PL Series) mounted to the lens. * This option is not effective with infrared light. This cover shields the lightemitting portion. * It is not intended to protect the surface from dust or water droplets. * Cannot be used with the LDL233 8 Series. BKLDL2 (for All Series) BKLDQ2 Series For the LDL233X8 Series Two s are included. Nine M3 screws (including one spare) M3 screws Nine, M2 5 screws (including one spare) You can adjust the irradiation angle when you secure the Light Unit. * The cannot be used with LDL233 8 Series. This can be used to mount four Bar Light Units. You can adjust the irradiation angle when you secure the Light Unit. There are two types of s. Use a combination of pairs when mounting with emission from four directions. Example PLLDL24X Arrange them so that the pairs are opposite each other. How to Recognize a Pair Black Not black PLLDL24XVE The polarization direction differs by 90. A pair of s will form a dark area when they are overlapped at a right angle. They will not form a dark area when overlapped in parallel. Specifications of Options Separate s Integrated s Direct number Direct number Direct number Direct number Direct number Direct number 02 DFLDL233X8 028 PLLDL233X8HO 029 PLLDL233X8VE 03 BKLDQ233X DFLDL24X DFLDL2X DFLDL29X DFLDL274X DFLDL24X DFLDL228X DFLDL22X PLLDL24X PLLDL2X PLLDL29X PLLDL274X PLLDL24X PLLDL228X PLLDL22X PLLDL24XVE PLLDL2XVE PLLDL29XVE PLLDL274XVE PLLDL24XVE PLLDL228XVE PLLDL22XVE CVLDL24X CVLDL2X CVLDL29X CVLDL274X CVLDL24X CVLDL228X CVLDL22X 0087 BKLDL BKLDQ24X BKLDQ2X BKLDQ29X BKLDQ274X BKLDQ24X BKLDQ228X BKLDQ22X Number Description s, s, and s Optional product DF: PL : CV: LDL2 X BKLDL2 BK LDQ2 X of applicable Light Unit Polarizing direction (for ) None (H0 for LDL233 8 Series): The direction of polarization is horizontal to the length of the. VO: Light is polarized perpendicular to the length of the plate. Separate s * The Separate s are the same for all Light Units in the series. (The cannot be used with LDL233 8 Series.) Integrated s Light Unit size 3

Dimension Diagrams DF/PL/CVLDL2 Series mmwide s (23.2) n.2 8.4 LDL24 LDL2 LDL29 n 4 84.7 23.7 mmwide s n (37.2) 34.2 8.4 LDL274 LDL24 LDL228 LDL22 n 79.7 222.7 2.7 For the LDL233X8 Series Two, 2.

5 BKLDQ24 BKLDQ2 A B 8 48 C 0 For the LDL233X8 Series 22 8 42 2 BKLDQ29 8 48 38 Ø3.2 32 28 () 7 9 3.

holes for mounting Light Units * Please contact a CCS sales representative for the dimension diagrams of specialorder products.

5 Dimension Diagrams DF/PL/CVLDL2 Series mmwide s (23.2) n LDL24 LDL2 LDL29 n mmwide s n (37.2) LDL274 LDL24 LDL228 LDL22 n For the LDL233X8 Series Two, 2.2 dia. holes for mounting (2) BKLDL2 (for entire Series) BKLDQ2 Series BKLDQ233 8 Bilaterally Symmetric 5 Two, 3.5 dia. holes mmwide s and mmwide s 9 A B BKLDQ24 BKLDQ2 A B 8 48 C 0 For the LDL233X8 Series BKLDQ Ø () R9 90 (90 ) A B 9 C C Four, M4 tapped through holes (For mounting) BKLDQ274 2 BKLDQ BKLDQ BKLDQ Four, M3 for mounting , 2.5 dia. holes for mounting Light Units * Please contact a CCS sales representative for the dimension diagrams of specialorder products. Technical Data Brightness Distribution The wide models provide uniform illumination over a wide area. We recommend models with this new feature. LWD=mm Shutter speed: /4,000 s Actual measurement of LDL22XRDWD (The values are for reference only.) LWD=0mm LWD=0mm Shutter speed: /2,000 s Actual measurement of LDL22XRDWD (The values are for reference only.) Brightness distribution 0 Output level (%) Brightness distribution 2 Brightness distribution 0 Output level (%) Brightness distribution 2 * Relative sensor brightness distribution measurement conditions: Intensity: 0%, Lens: F, Width: 775 mm, Field of vision: mm * Brightness will vary based on the camera's spectral response. The values given here are for reference only. The values are for reference only. Graphs of Temporal Changes * There are virtually no changes in the graph values that result from the directional characteristics or whether optional products are mounted. LDL24XRDWD () LDL24XSWWD () Temperature ( C) Temporal Changes in Temperature Bottom of case Ambient air temperature Stable at approx. C Temperature ( C) Temporal Changes in Temperature Bottom of case Ambient air temperature Stable at approx. 38 C 0 Time (minutes) 0 Time (minutes) Relative irradiation strength (%) Temporal Changes in Irradiation Output Width of variations: 2% 0 Time (minutes) Relative irradiation strength (%) Temporal Changes in Irradiation Output Width of variations: % 0 Time (minutes) * Graph measurement conditions: Actual measurement values for an intensity or 0% and an ambient air temperature or C. (These values are for reference only.) 4

6 Product Lineup Standard Product Selection Table The standard models have eight sizes of lightemitting surface from a compact 33 mm 8 mm to a wide 2 mm mm. Up to models with different combinations of size, light color, and directional characteristics are available. * Product Number Guide: You can easily access the information page for any of our products by entering the item's 7digit product number in the designated box on the CCS website (image processing page). Lightemitting Power Direct number LED color surface size Input voltage consumption Weight Supported Options s with 8mmwide lightemitting surface LDL233 8RD LDL233 8SW LDL233 8BL LDL233 8GR LDL233 8IR8 Infrared 33 x 8 mm.3 W 0.8 W.3 W g DFLDL233X8 PLLDL233X8HO PLLDL233X8VE BKLDQ233X8 032 LDL24XRD DFLDL24X LDL24XSW LDL24XBL 4 x mm.9 W g PLLDL24X PLLDL24XVE CVLDL24X 033 LDL24XGR BKLDQ24X s with mmwide Lightemitting Surface s with mmwide Lightemitting Surface LDL2XRD LDL2XSW LDL2XBL LDL2XGR LDL29XRD LDL29XSW LDL29XBL LDL29XGR LDL24XRDWD LDL24XSWWD LDL24XBLWD LDL24XGRWD LDL2XRDWD LDL2XSWWD LDL2XBLWD LDL2XGRWD LDL29XRDWD LDL29XSWWD LDL29XBLWD LDL29XGRWD LDL274XRD LDL274XSW LDL274XBL LDL274XGR LDL24XRD LDL24XSW LDL24XBL LDL24XGR LDL228XRD LDL228XSW LDL228XBL LDL228XGR LDL22XRD LDL22XSW LDL22XBL LDL22XGR LDL274XRDWD LDL274XSWWD LDL274XBLWD LDL274XGRWD LDL24XRDWD LDL24XSWWD LDL24XBLWD LDL24XGRWD LDL228XRDWD LDL228XSWWD LDL228XBLWD x mm 9 x mm 4 x mm x mm 9 x mm 74 x mm 4 x mm 28 x mm 2 x mm 74 x mm 4 x mm 28 x mm 3.8 W 5.7 W.9 W 3.8 W 5.7 W 5.7 W 2 W 8 W 2 W 5.7 W 2 W 8 W 75 g 95 g g 75 g 95 g 0 g g 2 g 2 g 0 g g 2 g DFLDL2X PLLDL2X PLLDL2XVE CVLDL2X BKLDQ2X DFLDL29X PLLDL29X PLLDL29XVE CVLDL29X BKLDQ29X DFLDL24X PLLDL24X PLLDL24XVE CVLDL24X BKLDQ24X DFLDL2X PLLDL2X PLLDL2XVE CVLDL2X BKLDQ2X DFLDL29X PLLDL29X PLLDL29XVE CVLDL29X BKLDQ29X DFLDL274X PLLDL274X PLLDL274XVE CVLDL274X BKLDQ274X DFLDL24X PLLDL24X PLLDL24XVE CVLDL24X BKLDQ24X DFLDL228X PLLDL228X PLLDL228XVE CVLDL228X BKLDQ228X DFLDL22X PLLDL22X PLLDL22XVE CVLDL22X BKLDQ22X DFLDL274X PLLDL274X PLLDL274XVE CVLDL274X BKLDQ274X DFLDL24X PLLDL24X PLLDL24XVE CVLDL24X BKLDQ24X DFLDL228X PLLDL228X PLLDL228XVE CVLDL228X LDL228XGRWD BKLDQ228X LDL22XRDWD DFLDL22X LDL22XSWWD LDL22XBLWD 2 x mm 2 W 2 g PLLDL22X PLLDL22XVE CVLDL22X LDL22XGRWD BKLDQ22X 5

7 Custom Product Selection Table Ten sizes of models with mmwide lightemitting surface areas and 7 sizes of models with mmwide lightemitting surface areas are available. Various combinations of light color and directional characteristics can be selected from a lineup of 2 models. Direct number LED color Lightemitting surface size Input voltage Power consumption Weight Supported Options s with mmwide Lightemitting Surface s with mmwide Lightemitting Surface LDL258X LDL297X LDL223X LDL2275X LDL234X LDL2353X LDL2392X LDL243X LDL24X LDL29X LDL258XWD LDL297XWD LDL223XWD LDL2275XWD LDL234XWD LDL2353XWD LDL2392XWD LDL243XWD LDL24XWD LDL29XWD LDL22X LDL2X LDL298X LDL222X LDL2X LDL294X LDL2242X LDL2290X LDL234X LDL2338X LDL232X LDL238X LDL24X LDL2434X LDL2458X LDL2482X LDL2X LDL22XWD LDL2XWD LDL298XWD LDL222XWD LDL2XWD LDL294XWD LDL2242XWD LDL2290XWD LDL234XWD LDL2338XWD LDL232XWD LDL238XWD LDL24XWD LDL2434XWD LDL2458XWD LDL2482XWD LDL2XWD 58 x mm 97 x mm 23 x mm 275 x mm 34 x mm 353 x mm 392 x mm 43 x mm 4 x mm 9 x mm 58 x mm 97 x mm 23 x mm 275 x mm 34 x mm 353 x mm 392 x mm 43 x mm 4 x mm 9 x mm 2 x mm x mm 98 x mm 22 x mm x mm 94 x mm 242 x mm 290 x mm 34 x mm 338 x mm 32 x mm 38 x mm 4 x mm 434 x mm 458 x mm 482 x mm x mm 2 x mm x mm 98 x mm 22 x mm x mm 94 x mm 242 x mm 290 x mm 34 x mm 338 x mm 32 x mm 38 x mm 4 x mm 434 x mm 458 x mm 482 x mm x mm 7. W 9.5 W 2 W 4 W W 8 W 9 W 2 W 23 W 25 W 7. W 9.5 W 2 W 4 W W 8 W 9 W 2 W 23 W 25 W.9 W 3.8 W 7. W 9.5 W 4 W W 9 W 23 W 25 W 27 W 29 W 3 W 33 W 35 W 37 W 38 W W.9 W 3.8 W 7. W 9.5 W 4 W W 9 W 23 W 25 W 27 W 29 W 3 W 33 W 35 W 37 W 38 W W g 45 g g 95 g 2 g 245 g 2 g 295 g 3 g 345 g g 45 g g 95 g 2 g 245 g 2 g 295 g 3 g 345 g 55 g g 25 g g 0 g 225 g 275 g 325 g 3 g 375 g 0 g 425 g 4 g 475 g 0 g 525 g 5 g 55 g g 25 g g 0 g 225 g 275 g 325 g 3 g 375 g 0 g 425 g 4 g 475 g 0 g 525 g 5 g For details, please contact a CCS sales representative. Number Description LDL2 X 2 3 Lightemitting surface size 33 8 to 2 LED color 3 Directional Characteristics RD : None: SW: ( only for LDL233 8) BL : GR : WD: IR : Infrared (LDL233 8 only)

8 Common Specifications LED color Input voltage (max.) Peak wavelength (typical) Correlated color temperature (typical) Cable length Input connector Polarity and signals Case material Operating temperature and humidity Storage temperature and humidity Cooling method (RD) (SW) (BL) (GR) Infrared (IR) 35 nm DC 4 nm 525 nm 8 nm 0 K 0.3 m SMR03VB : Anode (+), brown, 2: NC, 3: Cathode ( ), blue Aluminum alloy Temperature: 0 to C, Humidity: % to 85% (with no condensation) Temperature: to C, Humidity: % to 85% (with no condensation) Natural air cooling Spectral distribution Relative irradiation strength (%) Infrared 8 9 Wavelength (nm) * Use an Rseries Sharpcut Filter for red light. * The values for irradiation strength that are given in this catalog are for reference only. Dimension Diagrams LDL2nxRD/SW/BL/GR (same for WD models) LDL2nxRD/SW/BL/GR (same for WD models) LDL233 8RD/BL/GR/SW/IR (Lightemitting surface) 2 A B (Lightemitting surface) A B LDL LDL2 92 LDL n=b , M3, Depth: 5 (Same on opposite side) Slot for three M3 nuts 34 (Lightemitting surface) 2 A B LDL LDL LDL LDL n=b A B (Lightemitting surface) , M3, Depth: 5 (Same on opposite side) 7 () 7 7 Slot for five M3 nuts 8 (Lightemitting surface) (Lightemitting surface) Two, M2 option mounting holes M2, Depth: 4 (Provided on both sides) Two, M3 holes, depth: 4 (for mounting) Cable length: 0 mm Cable length: 0 mm Cable length: 0 mm LDL is a trademark of CCS. * Please contact a CCS sales representative for the dimension diagrams of specialorder products. Precautions Carefully read the product's instruction manual before use to ensure correct operation. Product specifications and design are subject to change without notice. Examples of workpiece imaging in this catalog are a guide that may be informative for choosing Light Units. Please check the functions of the equipment and requirements before choosing a Light Unit. Headquarters Shimodachiuriagaru, Karasumadori, Kamigyoku, Kyoto 2 Japan Phone: / Fax: Copyright CCS Inc. All Rights Reserved. URL: intlsales@ccsinc.co.jp Descriptions in this catalog are based on information available as of March. 0003LDL2 catalog

LDL2 Series. LDL2 Direct Illumination Bar Lights. 277 A Total of Models. Wide Range of Variations. CCS Inc. Patented Design Registered

LDL2 Series. LDL2 Direct Illumination Bar Lights. 277 A Total of Models. Wide Range of Variations. CCS Inc. Patented Design Registered LDL2 Series LDL2 Direct Illumination Bar Lights Patented Design Registered Wide Range of Variations 277 Total of s WWW.STEMMERIMGING.COM CCS Inc. Bar Light Units with Sophisticated High Performance: LDL2