Code Version *Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by the POC and/or the Commission if necessary.
|
|
- Marylou Taylor
- 5 years ago
- Views:
Transcription
1 Florida Building Code Product Approval FL R3 Impact 9 0 x 8 0 Inswing, Full Lite DP50 FL # Application Type FL14752-R3 Revision Code Version 2010 Application Status Comments Archived Approved *Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by the POC and/or the Commission if necessary. Product Manufacturer Address/Phone/ Authorized Signature Technical Representative Address/Phone/ Quality Assurance Representative Address/Phone/ Category Subcategory Compliance Method Certification Agency Validated By Nan Ya Plastics Corporation USA 8989 North Loop East Houston, TX (713) Ext 105 ajen96@yahoo.com.tw RUSKIN WU ajen96@yahoo.com.tw Ruskin Wu 8989 North Loop East Houston, TX (713) Ext 105 ajen96@yahoo.com.tw Exterior Doors Swinging Exterior Door Assemblies Certification Mark or Listing National Accreditation & Management Institute National Accreditation & Management Institute, Referenced Standard and Year (of Standard) Standard Year AAMA/NWWDA 101/I.S AAMA/WDMA 2002
2 Florida Building Code Product Approval FL R3 Impact 9 0 x 8 0 Inswing, Full Lite DP50 Equivalence of Product Standards Certified By Product Approval Method 101/I.S.2/NAFS AAMA/WDMA/CSA 101/I.S.2/A ASTM E ASTM E ASTM E ASTM E ASTM E ASTM E Method 1 Option A Date Submitted 10/22/2014 Date Validated 11/24/2014 Date Pending FBC Approval Date Approved 11/25/ Series " 9'0" x 8'0" Fiberglass I/S Glazed Double Door" Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: Yes Design Pressure: N/A Other: REFER TO APPROVAL DOCUMENT FOR DESIGN PRESSURES. NEUMA IMPACT INSWING - 9'0" X 8'0", GLAZED, 3 PANEL, DP50 Certification Agency Certificate FL14752_R3_C_CAC_NI006487A- R7.pdf FL14752_R3_C_CAC_NI R5.pdf Quality Assurance Contract Expiration Date 02/28/2018 Installation Instructions FL14752_R3_II_ A.pdf Verified By: Luis R. Lomas, P.E Created by Independent Third Party: Yes Evaluation Reports FL14752_R3_AE_511736B.pdf Created by Independent Third Party: Yes
3 NOTICE OF PRODUCT CERTIFICATION CERTIFICATION NO: NI006487A-R7 DATE: 04/10/2006 CERTIFICATION PROGRAM: Structural COMPANY: Nan Ya CODE: REVISION DATE: 11/11/2014 To verify that the Notice of Product Certification is valid, please visit to assure that the product is active and currently listed. This certification represents product conformity to the applicable specification and that certification criteria has been satisfied. A NAMI approved certification label must be applied to the product to claim certification status. Please review and advise NAMI if any corrections are required to this document. COMPANY NAME AND ADDRESS Nan Ya Plastics Corporation USA PRODUCT DESCRIPTION Series 9'0" x 8'0" Fiberglass 8989 North Loop East, Suite 800 In-Swing Glazed Double Door Houston, TX Configuration: XXX Glazing: IG-Laminate-1/8" Annealed Glass/0.090" PVB Interlayer/1/8" Annealed Glass/1/8" Tempered Glass Frame: W-9'3" Panel: W-3"0" DLO: W-1'9" H-8'0" H-8'0" H-6'7" SPECIFICATION ASTM E /E PRODUCT RATING Design Pressure: +50/-50 psf Wind Zone 3 - Missile Level D Qualifies Configurations: X, XX, XXX Product Tested By: Certified Testing Laboratories Report No: CTLA-1508W Expiration Date: February 28, 2018 Administrator s Signature: NATIONAL ACCREDITATION AND MANAGEMENT INSTITUTE, INC George Washington Memorial Highway Hayes, VA Tel: (804) Fax: (804)
4 NOTICE OF PRODUCT CERTIFICATION CERTIFICATION NO: NI R5 DATE: 04/10/2006 CERTIFICATION PROGRAM: Structural COMPANY: Nan Ya CODE: REVISION DATE: 11/10/2014 To verify that the Notice of Product Certification is valid, please visit to assure that the product is active and currently listed. This certification represents product conformity to the applicable specification and that certification criteria has been satisfied. A NAMI approved certification label must be applied to the product to claim certification status. Please review and advise NAMI if any corrections are required to this document. COMPANY NAME AND ADDRESS Nan Ya Plastics Corporation USA PRODUCT DESCRIPTION Series 9'0" x 8'0" Fiberglass 8989 North Loop East, Suite 800 In-Swing Glazed Double Door Houston, TX Configuration: XXX Glazing: IG-Laminate-1/8" Annealed Glass/0.090" PVB Interlayer/1/8" Annealed Glass/1/8" Tempered Glass Frame: W-9'3" Panel: W-3"0" DLO: W-1'9" H-8'0" H-8'0" H-6'7" SPECIFICATION AAMA/NWWDA 101/I.S.2-97 ASTM E AAMA PRODUCT RATING HGD-LC25(w/water) Design Pressure: +50/-50 psf (w/o water) FER-Passed Qualifies Configurations: X, XX, XXX Product Tested By: Certified Testing Laboratories Report No: CTLA-1420W-1(Structural/FER) Expiration Date: February 28, 2018 Administrator s Signature: NATIONAL ACCREDITATION AND MANAGEMENT INSTITUTE, INC George Washington Memorial Highway Hayes, VA Tel: (804) Fax: (804)
5 L. Roberto Lomas P.E. Engineering Evaluation Report 233 W. Main St. Danville, VA Report No.: B Manufacturer: Product Line: Nan Ya Plastics Corporation 8989 North Loop East Houston, TX Series 9 0 x 8 0 Fiberglass In-swing Glazed Double Door w/ and w/o Sidelites Compliance: The above mentioned product has been evaluated for compliance with the requirements of the Florida Department of Business and Professional Regulation for Statewide Acceptance per Rule 61G method 1(a). The product listed herein complies with requirements of the Florida Building Code. Supporting Technical Documentation: Approval document: drawing number Revision A, prepared, signed and sealed by Luis Roberto Lomas P.E. 1. Report No.: CTLA 1420W-1 signed and sealed by Ramesh Patel P.E. Certified Testing Laboratories, Orlando, FL AAMA/NWWDA 101/I.S.2-97 Design pressure: ±50.0psf Water penetration resistance 3.75psf 2. Report No.: CTLA 1508W signed and sealed by Ramesh Patel P.E. Certified Testing Laboratories, Orlando, FL ASTM E and ASTM E ASTM E1886/ E1996 Large Missile Impact, Level D, Wind Zone 3 ASTM E1886/ E1996 Cyclic Load Test, ±50.0psf design pressure 3. Anchor calculations, report number , prepared, signed and sealed by Luis Roberto Lomas P.E. Limitations and Conditions of use: Maximum design pressure: ±50.0psf (where water resistance is not required) +25.0/-50.0psf (where water resistance is required) Maximum unit size: 111 x 95 ½ Units must be glazed per ASTM E , see installation instructions for glass options. This product is not rated to be used in the HVHZ. This product is impact resistant and does not require impact protection in wind borne debris regions. Installation: Units must be installed in accordance with approval document, Revision A. Certification of Independence: Please note that I don t have nor will acquire a financial interest in any company manufacturing or distributing the product(s) for which this report is being issued. Also, I don t have nor will acquire a financial interest in any other entity involved in the approval process of the listed product(s). 1 of 1 Luis R. Lomas, P.E. FL No.: /06/2014
6
7
8
9
10
11
12
Code Version *Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by the POC and/or the Commission if necessary.
Florida Building Code Product Approval FL14752.15-R3 Impact 9 0 x 8 0 Outswing, Full Lite DP50 FL # Application Type FL14752-R3 Revision Code Version 2010 Application Status Comments Archived Approved
More informationCode Version *Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by the POC and/or the Commission if necessary.
Florida Building Code Product Approval FL14752.8-R3 Impact 12 0 x 6 11/6 8 Outswing, Full Lite DP70 FL # Application Type FL14752-R3 Revision Code Version 2010 Application Status Comments Archived Approved
More informationCode Version *Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by the POC and/or the Commission if necessary.
Florida Building Code Product Approval FL14752.12-R3 Non-Impact 12 0 x 8 0 Outswing, Full Lite DP70 FL # Application Type FL14752-R3 Revision Code Version 2010 Application Status Comments Archived Approved
More informationCode Version *Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by the POC and/or the Commission if necessary.
Florida Building Code Product Approval FL14752.32-R3 Impact 12 0 x 6 8 Outswing, 3/4 Lite DP50 FL # Application Type FL14752-R3 Revision Code Version 2010 Application Status Comments Archived Approved
More informationFlorida Building Code Online
Florida Building Code Online http://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wgevxqwtdqsxyieb4opodd... Page 1 of 2 12/2/2010 BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats
More informationEvaluation Report from a Florida Architect or Engineer Evaluation by Architect or Engineer
Report from a Florida Architect or er er Report by a Florida Registered Architect or Professional er When Method 1D, Report from a Florida Registered Architect or Professional er is selected, the application
More informationEvaluation Report Evaluation Entity Method Evaluation by an Evaluation Entity
Report by an - Online Report Method by an Report from an Approved Product When Method 1C, Report from an Approved method is selected, the application will require you to upload the evaluation report to
More informationFlorida Product Approval FAQ s
Florida Product Approval FAQ s General Questions/Answers on process: 1. Who is eligible for a Quality Assurance Certificate? a. Licensees that are currently in the Hallmark Certification Program who utilize
More informationTO THE FLORIDA BUILDING COMMISSION
FLORIDA BUILDING COMMISSION PRODUCT APPROVAL VALIDATION WORKGROUP RECOMMENDATIONS TO THE FLORIDA BUILDING COMMISSION JUNE 1, 2006 Tampa, Florida Meeting Design & Facilitation By Report By Jeff A. Blair
More informationPage 1 of 3 BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats & Facts Publications FBC Staff BCIS Site Map Links Search Product Approval USER: Public User Product Approval Menu > Product
More informationGold Label. The AAMA Certification
The AAMA Certification Gold Label on window and door products is the mark of integrity and Assurance of Quality that makes these products stand out among all others. American Architectural Manufacturers
More informationDan Walker, P.E. Thomas Associates, Inc. NSA Fall Meeting October 7, 2010 St. Louis, Missouri
Dan Walker, P.E. Thomas Associates, Inc. NSA Fall Meeting October 7, 2010 St. Louis, Missouri 1 Today s Report in a Nutshell Updates to AAMA/NPEA/NSA 2100 Update on Component Testing Standard ICC 2012
More informationhurricane resistant Product Selector Architectural Window: ZS-2750 StormMax Curtain Wall: HR-250/ HR-251 StormMax Entrance: MSD-375 StormMax
hurricane resistant Product Selector Architectural Window: ZS-2750 StormMax Curtain Wall: HR-250/ HR-251 StormMax Entrance: MSD-375 StormMax Storefront: FG-5000/ FG-5100/FG-5100T StormMax Window Wall:
More informationCHAPTER 9N-3 Product Approval
9N-3.001 9N-3.002 9N-3.003 9N-3.004 9N-3.005 9N-3.006 9N-3.007 9N-3.008 9N-3.009 9N-3.010 9N-3.011 9N-3.012 9N-3.013 9N-3.014 9N-3.015 9N-3.016 CHAPTER 9N-3 Product Approval Scope. Definitions. Exceptions.
More informationAmerican Society of Sanitary Engineering Seal (Certification) Program
American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report for: Water Hammer Arresters Tested under ASSE Standard 1010 Revised: February, 2004 Laboratory File Number
More informationProposed Code Modifications This document created by the Florida Department of Business and Professional Regulation
Proposed Code Modifications This document created by the Florida Department of Business and Professional Regulation - 850-487-1824 WITHOUT COMMENTS Page 1 of 14 Total Mods for in Approved as Submitted:
More informationProgram Guidelines for Security Fenestration Rating and Certification Program Administered by Architectural Testing
Program Guidelines for Security Fenestration Rating and Certification Program Administered by Architectural Testing TABLE OF CONTENTS 1.0 FORWARD...2 2.0 GENERAL...2 3.0 REFERENCED DOCUMENTS...4 4.0 DEFINITION
More informationCode of Conduct. Certified Backflow Tester
Certified Backflow Tester Sarasota County Public Utilities (SCPU) has the primary responsibility of protecting the public water distribution system. The utility must take all reasonable precautions to
More informationAPPLICATION FOR AIR EMISSION TESTING BODY (AETB) ACCREDITATION
APPLICATION FOR AIR EMISSION TESTING BODY (AETB) ACCREDITATION Source Emission Measurement Quality Assurance Programs (SEMQAP) Stack Testing Accreditation Council (STAC) A. Purpose of Application: Mark
More informationBuilding Code Services, Education & Accreditation ,
CHAPTER 9B-70 FLORIDA BUILDING COMMISSION - BUILDING CODE TRAINING PROGRAM 9B-70.001 Building Code Core Education. The purpose of the Building Code Training Program is to educate licensed building department
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationDEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION (DBPR) Building Codes Information System (BCIS) Chapter 5 : Proposed Code Modifications: User Guide
DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION (DBPR) Building Codes Information System (BCIS) Chapter 5 : Proposed Code Modifications: User Guide B U I L D I N G C O D E S I N F O R M A T I O N S
More informationPRODUCT UNDER TEST TEST EVENT RESULT. Quality Manual ISO Test Lab Test Report
PRODUCT UNDER TEST Organization Name: Varian Medical Systems Address of Vendor: 3100 Hansen Way Palo Alto CA 94304 Test Product Name: 360 Oncology Patient Portal Test Product Version-with-Release: 1.0
More informationPRODUCT UNDER TEST TEST EVENT RESULT. Quality Manual ISO Test Lab Test Report
PRODUCT UNDER TEST Organization Name: SRS-Health Address of Vendor: 155 Chestnut Ridge Road Montvale NJ 07645 Test Product Name: SRS EHR Test Product Version-with-Release: v10 TEST EVENT RESULT Criteria
More informationONBOARDING APPLICATION
NATE s Blue Button Plus for Providers Trust Bundle ONBOARDING APPLICATION Main Point of Contact Name: Telephone Number: Organization: Mobile: Email: Physical Address: Overview of document This document
More informationThe Need for Regulations For Private Labs Certification. Waleed Khaled Eid, PhD Consultant, Sematco Soil and Engineering Material Testing Co. W.L.L.
The Need for Regulations For Private Labs Certification Waleed Khaled Eid, PhD Consultant, Sematco Soil and Engineering Material Testing Co. W.L.L. Outline Current Practice in Kuwait Sematco Soil & Engineering
More informationAPPROVAL FCA103 ISSUED BY THE COMPETENT AUTHORITY OF THE UNITED STATES EXPIRATION DATE: March 31, 2019
U.S. Department East Building, PHH 32 of Transportation 1200 New Jersey Avenue, Southeast Pipeline and Hazardous Materials Safety Administration Washington, D.C. 20590 APPROVAL FCA103 ISSUED BY THE COMPETENT
More informationCity of Winter Garden REQUEST FOR PROPOSAL RFP CR Mail and Fulfillment Services LEGAL ADVERTISEMENT CITY OF WINTER GARDEN
City of Winter Garden REQUEST FOR PROPOSAL Mail and Fulfillment Services LEGAL ADVERTISEMENT CITY OF WINTER GARDEN REQUEST FOR PROPOSAL (RFP) NO. CR18-001 FOR A VENDOR TO PROVIDE DOMESTIC AND INTERNATIONAL
More informationThe Value of ANSI Accreditation. Top 10 Advantages. of accredited third-party conformity assessment
The Value of ANSI Accreditation Top 10 Advantages of accredited third-party conformity assessment The American National Standards Institute (ANSI) offers highly recognized accreditation programs globally
More informationMEDICAID MARYLAND PRE-ENROLLMENT INSTRUCTIONS MCDMD
MEDICAID MARYLAND PRE-ENROLLMENT INSTRUCTIONS MCDMD HOW LONG DOES PRE-ENROLLMENT TAKE? Standard processing time is 2 weeks. WHAT FORM(S) SHOULD I COMPLETE? Maryland Medical Care Programs Submitter Identification
More informationMicrogeneration Certification Scheme: MCS 004
Microgeneration Certification Scheme: MCS 004 Product Certification Scheme Requirements: Solar Collectors Issue 3.1 This Microgeneration Product Certification Standard is the property of Department of
More informationGreen Squared Certification Manual
SCS Global Services Manual Green Squared Certification Manual Environmental Certification Services Division 2000 Powell Street, Ste. 600, Emeryville, CA 94608 USA +1.510.452.8000 main +1.510.452.8001 fax
More informationBattery Program Management Document
Battery Program Management Document Revision 5.1 February 2011 CTIA Certification Program 1400 16 th Street, NW, Suite 600 Washington, DC 20036 e-mail: certification@ctia.org Telephone: 1.202.785.0081
More information36" wide coverage with 1-1/4" high ribs at 12" o.c.
Manufacturer: Product Name: Panel Description: Union Corrugating Company PBR Panel 36" wide coverage with 1-1/4" high ribs at 12" o.c. FL 9555.6-R3 C1999-8 3.20.2015 Page 2 of 2 Materials: Minimum 26 ga.,
More informationMinimum Qualifications for Special Inspectors, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
Minimum Qualifications for Special Inspectors, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians City of Novi Community Development Building Division 1 A. FABRICATORS A.1.
More informationProduct certification scheme requirements. Solar Photovoltaic Modules
Page 1 of 5 1. Introduction This document identifies the evaluation and assessment requirements and practices for the purposes of certification and listing of Solar Photovoltaic (PV) modules. Certification
More informationAPPLICATION CHECKLIST IMPORTANT Submit all items on the checklist below with your application to ensure faster processing. APPLICATION REQUIREMENTS
State of Florida Construction Industry Licensing Board Continuing Education Course Approval Application Form # DBPR CILB 28 1 of 5 APPLICATION CHECKLIST IMPORTANT Submit all items on the checklist below
More informationUnderstanding Third-Party Certification of Personal Protective Equipment
Understanding Third-Party Certification of Personal Protective Equipment P A T R I C I A A G L E A S O N S A F E T Y E Q U I P M E N T I N S T I T U T E P G L E A S O N @ S E I N E T. O R G Certification
More informationAccreditation process (LA-I-02)
Accreditation process (LA-I-02) Bureau of Laboratory Accreditation Department of Science Service Ministry of Science and Technology 75/7 Rama VI Road, Ratchathewi District, Bangkok 10400 Tel: 0-2201-7325,
More informationANRC II. Eligibility requirements Authority Requirements for accreditation Review of application...
ANRC-138.00 Rules Governing the Arkansas Natural Resources Commission s* Floodplain Administrator Accreditation Program Title 18 (Effective Date November 29, 2003) *In 2005, the agency known as Arkansas
More informationMEDICAID MARYLAND PART A (MCDMD) PRE-ENROLLMENT INSTRUCTIONS
MEDICAID MARYLAND PART A (MCDMD) PRE-ENROLLMENT INSTRUCTIONS WHAT FORM(S) SHOULD I DO? Maryland Medical Care Programs Submitter Identification Form Trading Partner Agreement o Both Forms must have original
More informationMINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
MINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians ORION TOWNSHIP BUILDING DEPARTMENT A. FABRICATORS A.1. Fabricators: Not
More informationSAI GLOBAL PRODUCT SERVICES
SMG03 Guidelines for Product Services Testing SAI GLOBAL PRODUCT SERVICES Guidelines for Product Services Testing A step by step guide for applicants and laboratories conducting type testing for certification
More informationSECTION EGR ELEVATED GLASS RAILING SYSTEMS. A. Tempered Glass Wet Glazed in Elevated Railing Assemblies.
1 SECTION 05 7310 EGR ELEVATED GLASS RAILING SYSTEMS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Tempered Glass Wet Glazed in Elevated Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal Fabrications
More information1 of 5. APPLICATION CHECKLIST - IMPORTANT - Submit all items on the checklist below with your application to ensure faster processing.
of Florida Florida Real Estate Commission Application for Branch Office Form # DBPR RE 8 1 of 5 APPLICATION CHECKLIST - IMPORTANT - Submit all items on the checklist below with your application to ensure
More informationCLEANROOM CERTIFICATION AND ACCEPTANCE PROCEDURES
CLEANROOM CERTIFICATION AND ACCEPTANCE PROCEDURES PART I--GENERAL 1.1 Work Included [Edit this specification to eliminate tests not required. Place tests in the desired sequence of performance] A. This
More informationMCS: 005. Product Certification Scheme Requirements: Solar Photovoltaic Modules. Issue 2.3
MCS: 005 Product Certification Scheme Requirements: Solar Photovoltaic Modules Issue 2.3 This Microgeneration Installation Standard is the property of Department of Energy and Climate Change (DECC), 3
More informationCertification Commission of NAMSS Policies and Procedures
Certification Commission of NAMSS Policies and Procedures Recertification, Expiration, and Revocation of Certification Number: 300.30 Effective Date: March 2003 POLICY STATEMENT: Certification shall be
More informationINVESTIGATIVE REPORT FOR BROWARD COUNTY 911 DISPATCH CENTERS. January 18, 2013
INVESTIGATIVE REPORT FOR BROWARD COUNTY 911 DISPATCH CENTERS January 18, 2013 Scope of Work Building Scope 1) Year the facility was built. 2) Hurricane rating. 3) Flood Plain. 4) Future capacity. 5) Square
More informationLaboratory Accreditation Board
The purpose of this RFQ is to solicit proposals to have the five regional forensic crime laboratories within the New Jersey State Police Office of Forensic Sciences assessed to the ISO/IEC 17025 international
More informationMEDICAID MARYLAND PRE ENROLLMENT INSTRUCTIONS MCDMD
MEDICAID MARYLAND PRE ENROLLMENT INSTRUCTIONS MCDMD HOW LONG DOES PRE ENROLLMENT TAKE? Standard processing time is 2 weeks. WHAT FORM(S) SHOULD I COMPLETE? Maryland Medical Care Programs Submitter Identification
More informationCERTIFICATE. Issued Date: Aug. 16, 2012 Report No.: R-ITCEP07V03
CERTIFICATE Issued Date: Aug. 16, 2012 Report No.: 123048R-ITCEP07V03 This is to certify that the following designated product Product : HMI (Human Machine Interface) Trade name : EasyView, WeinView, Weintek
More informationAccreditation Criteria For Conformity Assessment Bodies
Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2
More informationNFRC Errata and Addendum Log
NFRC 705-2014 NFRC Errata and Addendum Log E0A2 (JUNE 2014) The NFRC Board of Directors has approved removal of section 4.2.D. 4.2.D Certified fenestration products/systems may be used in other projects
More informationPolicy for Accrediting Assessment Bodies Operating within the Cradle to Cradle Certified Product Certification Scheme. Version 1.2
Policy for Accrediting Assessment Bodies Operating within the Cradle to Cradle Certified Product Certification Scheme Version 1.2 July 2015 Copyright, Cradle to Cradle Products Innovation Institute, 2015
More informationWater Quality Association Sustainability Certification Program s Logo Policy. Version 1.0
Water Quality Association Sustainability Certification Program s Logo Policy Version 1.0 Effective Date: 7/19/2013 TABLE OF CONTENTS INTRODUCTION... 3 OWNERSHIP & REGISTRATION OF THE SUSTAINABILITY MARK...
More informationSECTION ENCLOSED SWITCHES AND CIRCUIT BREAKERS
SECTION 262816 - ENCLOSED SWITCHES AND CIRCUIT BREAKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationONBOARDING APPLICATION
NATE s Blue Button for Consumers (NBB4C) Trust Bundle ONBOARDING APPLICATION Main Point of Contact Name: Telephone Number: Organization: Mobile: Email: Physical Address: Overview of document This document
More informationGeneral Rules for Product Certification by the co-operation of certification bodies (GRPC)
29. January 2018 General Rules for Product Certification by the co-operation of certification bodies (GRPC) Contents: 1 The Co-operation of Certification Bodies (CCB) 1.1 General 1.2 Procedure 1.3 CCB
More informationAPPLICATION CHECKLIST IMPORTANT Submit all items on the checklist below with your application to ensure faster processing.
State of Florida Department of Business and Professional Regulation Building Code Administrators and Inspectors Board Application for Education Course Approval/Renewal and Provider And Internship Certification
More informationSDDOT CONSTRUCTION MANUAL PROJECT MANAGEMENT SECTION CHAPTER 3 MATERIALS TABLE OF CONTENTS
SDDOT CONSTRUCTION MANUAL PROJECT MANAGEMENT SECTION CHAPTER 3 MATERIALS TABLE OF CONTENTS ITEM PAGE SDDOT MATERIALS MANUAL...3-2 ADMINISTRATION OF MATERIALS CERTIFICATION AND TESTING PROCEDURES...3-2
More informationNew Supplier Training and Navigation
New Supplier Training and Navigation This document contains information related to isupplygw new supplier training and navigation at the George Washington University. This document is updated on a regular
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000035007 01 Certified AMS: Manufacturer: Test lnstitute: D-EMS 2000 DURAG data systems GmbH Kollaustr.105 22453
More informationThe CPE hour is equal to 50 minutes. Credit is given in whole hours only; any fractional hours must be rounded down.
Charlie Crist, Governor Holly Benson, Secretary Division of Certified Public Accounting Veloria Kelly, Director 240 NW 76th Drive, Suite A Gainesville, FL 32607-6655 Phone: 850.487.1395 Fax: 352.333.2508
More informationNew York Department of Financial Services Cybersecurity Regulation Compliance and Certification Deadlines
New York Department of Financial Services Cybersecurity Regulation Compliance and Certification Deadlines New York Department of Financial Services ( DFS ) Regulation 23 NYCRR 500 requires that entities
More informationState of Florida Department of Business and Professional Regulation Board of Accountancy CPA Change of Status Application Form # DBPR CPA 7
1 of 7 State of Florida Department of Business and Professional Regulation Board of Accountancy CPA Change of Status Application Form # DBPR CPA 7 APPLICATION CHECKLIST IMPORTANT Submit all items on the
More informationHOW TO FILE CERTIFICATION OF COMPLIANCE
HOW TO FILE CERTIFICATION OF COMPLIANCE New Filing (Meaning new filing in 2019): All prior filings have expired. When: File between January 1, 2019 February 15, 2019 Who: Qualifier: Any entity that has
More informationUL TYPE EXAMINATION CERTIFICATE Low Voltage Directive 2014/35/EU
00-IC-F0468 Issue #: 6.0_LVD Page 1/14 Applicant Manufacturer Product Sample Description WAAREE ENERGIES LTD 602, Western Edge-I, Off. Western Express Highway, Borivali(E), Mumbai 400066, Maharashtra,
More informationILNAS/PSCQ/Pr004 Qualification of technical assessors
Version 1.1 21.6.2016 Page 1 of 6 ILNAS/PSCQ/Pr004 Qualification of technical assessors Modifications: review of the document 1, avenue du Swing L-4367 Belvaux Tél.: (+352) 247 743-53 Fax: (+352) 247 943-50
More information[Document reference] COMMITTEE DRAFT (CD)
IEC/TC or SC: Title of TC/SC: Project number 0- Date of circulation [Document reference] COMMITTEE DRAFT (CD) Closing date for comments WIND TURBINE GENERATOR SYSTEMS Also of interest to the following
More informationFenestrationAssociate and FenestrationMaster CANDIDATE GUIDE
Welcome! This candidate guide will help program participants prepare for the AAMA FenestrationAssociate and FenestrationMaster certification exam. Part I contains general information about exam procedures
More informationNENA Procedures for Notification of ERDB and VPC Operators of ESN Changes by Administrator Operations Information Document
NENA Procedures for Notification of ERDB and VPC Operators of ESN Changes by 9-1-1 Operations Information Document NENA Procedures for Notification NENA 57-503, Version 1 Prepared by: National Emergency
More informationInstructions for Applying for Consultants Competitive Negotiation Act (CCNA) Certification with Palm Beach County (PBC)
Instructions for Applying for Consultants Competitive Negotiation Act (CCNA) Certification with Palm Beach County (PBC) In accordance with the Consultants Competitive Negotiation Act (CCNA), Florida Statutes
More informationMicrogeneration Certification Scheme: MCS 005
Microgeneration Certification Scheme: MCS 005 Product Certification Scheme Requirements: Solar Photovoltaic Modules Issue 3.0 This Microgeneration Guidance Document is the property of Department for Business,
More informationSECTION [13200] FRAMED 2000 CLEANROOM WALL SYSTEM
SECTION [13200] FRAMED 2000 CLEANROOM WALL SYSTEM SECTION 1 GENERAL 1.01 SECTION INCLUDES A. This Section specifies all requirements necessary to furnish and install a complete framed modular cleanroom
More informationCERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS
Accredited product certification CERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS Revisions in this document: Rev. no. Date Description of revision 3 2015-08-25 4.8 Added information regarding certificate
More informationVoluntary Prekindergarten Provider Monitoring Tool
Voluntary Prekindergarten Provider Monitoring Tool Program Assurance Specialist Information Specialist Name: Time in: Time out: Specialist #: Fax #: 954-377-2192 Specialist E-mail: Date: Program Year:
More informationCertification Process Household and Similar Equipment
Certification Process Household and Similar Equipment Ordinance No. 371, of December 29, 2009 Objective: Evaluation of household and similar appliances, with a focus on security requirements in order to
More informationNEW YORK CITY DEPARTMENT OF BUILDINGS. Notice of Public Hearing and Opportunity to Comment on Proposed Rules
NEW YORK CITY DEPARTMENT OF BUILDINGS Notice of Public Hearing and Opportunity to Comment on Proposed Rules What are we proposing? The Department of Buildings (DOB) is proposing to amend 1 RCNY 104-09
More informationKaren O. Zwolak Tampa Electric Company 702 N. Franklin Street Tampa, FL
5012 W. Lemon Street Tampa, Florida 33609 Ph 813.944.3464 Fax 813.944.4959 December 31, 2015 (via email) Karen O. Zwolak Tampa Electric Company 702 N. Franklin Street Tampa, FL 33602 kozwolak@tecoenergy.com
More informationThe CPE hour is equal to 50 minutes. Credit is given in whole hours only; any fractional hours must be rounded down.
Division of Service Operations Bureau of Education & Testing Continuing Education Correspondence 1940 North Monroe Street Tallahassee, Florida 32399-1046 Phone: 850.921.8582 Fax: 850.922.2316 Ken Lawson,
More informationMicrogeneration Certification Scheme: MCS 005
Microgeneration Certification Scheme: MCS 005 Product Certification Scheme Requirements: Solar Photovoltaic Modules Issue 2.5 This Microgeneration Installation Standard is the property of Department of
More informationKENYA ACCREDITATION SERVICE
KENAS-GUD-010 01 22/06/2013 22/07/2013 GUD 1 of 9 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature
More informationVOLUME ONE OF THE BUILDING CODE OF AUSTRALIA AND THE STRUCTURAL ENGINEER
PRACTICE NOTE NO: 16 Version 1 Amended May 2007 Page 1 of 7 Volume One of the building Code of Australia deals with Class 2 to Class 9 Buildings. A Structural Engineer is primarily concerned with two sections
More informationACCAB. Accreditation Commission For Conformity Assessment Bodies
ACCAB Accreditation Commission For Conformity Assessment Bodies ACCAB Platinum Plus Accreditation For Certification Bodies, Inspection Bodies, Testing & Calibration Laboratories and Medical Laboratories
More informationCertification Body Audit Resources
Certification Body Audit Resources Policy 13 v4.01 Original Issue 20 May 2012 Revision Date Effective Date Policy Applicable To All CertiSource Staff and Certification Body Staff Policy Managed By Approved
More informationA Bill Regular Session, 2017 HOUSE BILL 1259
Stricken language would be deleted from and underlined language would be added to present law. 0 State of Arkansas st General Assembly A Bill Regular Session, HOUSE BILL By: Representative Fortner For
More informationIAS Accreditation Overview. Mark Johnson, ICC
IAS Accreditation Overview Mark Johnson, ICC What We Will Cover IAS Background Overview of IAS Programs IAS Accreditation and Building Codes IAS Laboratory Accreditation Program 2 About IAS: Company Profile
More informationMARPA DOCUMENT MARPA Revision 1.1
MARPA 1100 - Page 1 MARPA DOCUMENT MARPA 1100 Revision 1.1 STREAMLINE PROGRAM FOR PMA APPLICATIONS OF NON-SAFETY-SIGNIFICANT ARTICLES SUBMITTED BY EXPERIENCED APPLICANTS WITH A QUALIFYING PERFORMANCE RECORD
More informationBABT 738. A guide to applying for US Equipment Approval for telephony terminal equipment through TÜV SÜD BABT as a TCB
BABT 738 A guide to applying for US Equipment Approval for telephony terminal equipment through TÜV SÜD BABT as a TCB BABT is the Telecommunications Certification body of TÜV SÜD TÜV SÜD BABT 2012 Issue
More informationSECTION (16410) - ENCLOSED SWITCHES AND CIRCUIT BREAKERS
SECTION 26 28 16 (16410) - ENCLOSED SWITCHES AND CIRCUIT BREAKERS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Individually Mounted Switches and Circuit Breakers Used for the following: a. Service
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland':` Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000054059 Evaluation system: D-EMS 2020 c/w remote emission data transmission module Manufacturer: Test Laboratory:
More informationCERTIFIED CONSTRUCTION CONTRACT ADMINISTRATOR (CCCA) DESIGNATION
APPLICATION FORM CERTIFIED CONSTRUCTION CONTRACT ADMINISTRATOR (CCCA) DESIGNATION Construction Specifications Canada Devis de Construction Canada 120 Carlton Street, Suite 312, Toronto, Ontario, M5A 4K2
More informationSECTION A. Tempered Glass Free Standing Swing Gate Post Assemblies.
Page 1 of 5 SECTION 05 7310 CRL-BLUMCRAFT FREE STANDING GLASS SWING GATE POST SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Tempered Glass Free Standing Swing Gate Post Assemblies. 1.2 RELATED SECTIONS
More informationDISADVANTAGED BUSINESS ENTERPRISE PROGRAM. Unified Certification Program OKLAHOMA
DISADVANTAGED BUSINESS ENTERPRISE PROGRAM Unified Certification Program OKLAHOMA TABLE OF CONTENTS General... 1 Ratification Process... 1 Implementation Schedule... 2 Regulatory Requirements... 2 DBE Directory...
More informationCENTRAL CALIFORNIA EMERGENCY MEDICAL SERVICES
CENTRAL CALIFORNIA EMERGENCY MEDICAL SERVICES Manual Subject Emergency Medical Services Administrative Policies and Procedures Emergency Medical Technician (EMT-I) Recertification / Continuing Education
More informationSECTION TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS. A. Monolithic Tempered Glass Dry Glazed Railing Assemblies.
1 SECTION 05 7310 TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Monolithic Tempered Glass Dry Glazed Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal
More informationCERTIFICATE OF APPROVAL No CAF 149 SPECIALIST JOINERY PRODUCTS LIMITED
CERTIFICATE OF APPROVAL No CAF 149 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection s The undermentioned products of Designated CERTIFIRE Approved
More informationIndonesia - SNI Certification Service Terms
Indonesia - SNI Certification Service Terms These Service Terms shall govern the Indonesian National Standard ( SNI ) Certification Services performed by the UL Contracting Party (as identified in the
More informationNRMCA Sustainable Concrete Plant Certification Policies and Procedures
NRMCA Sustainable Concrete Plant Certification Policies and Procedures February 2011 1 Introduction 1.1 As interest in sustainable development grows, the ready mixed concrete industry must be able to support
More information