The Need for Regulations For Private Labs Certification. Waleed Khaled Eid, PhD Consultant, Sematco Soil and Engineering Material Testing Co. W.L.L.
|
|
- Kory Wright
- 5 years ago
- Views:
Transcription
1
2
3 The Need for Regulations For Private Labs Certification Waleed Khaled Eid, PhD Consultant, Sematco Soil and Engineering Material Testing Co. W.L.L.
4 Outline Current Practice in Kuwait Sematco Soil & Engineering Material Testing Co. WLL Certification & Accreditation of Sematco Take Away Key Messages
5 Current Practice in Kuwait All private labs are licensed through Ministry of Commerce. No inspection or accreditation is required. If private lab wishes to provide services to Kuwait Municipality, approval of Practicing Engineering Profession Committee is required. No inspection or accreditation is required.
6 Current Practice in Kuwait If private lab wishes to provide services to government agencies, it has to register in the ministry s approved list of contractors. Documents required are the license, lab profile and may be the financial sheet. No inspection or accreditation is required.
7 Current Practice in Kuwait If private lab wishes to provide services to oil sector companies and organizations, it has to go through the registration process and get on the list of approved contractors. No inspection or accreditation is required.
8 Current Practice in Kuwait Upon the request of the private lab, Ministry of Public Works, Government Testing Center, will issue a Lab Certification after sending an inspection team to the lab facility. This certificate is rarely used in the different projects.
9 Current Practice in Kuwait In short certification is not required to open a lab facility in the State of Kuwait, practice material testing and issue testing reports and act as a third party inspector in the construction projects.
10 Current Practice in Kuwait Additional Points: Most quality work contracts are done through the main contractor and not through the consultant, this might create friction and conflicts Many contracts require the contractor to set up on site lab for material quality control.
11 Sematco Soil & Engineering Material Testing Co. WLL SEMATCO was established in 1995 as a specialized company in the field of engineering services, consultation, third party inspection and material testing. Personnel includes PhD, M.Sc. and B.Sc. holders in the field of Engineering with experience reaching to 30 years Fully equipped labs with latest technology and field testing equipment
12 Vision Sematco Soil & Engineering Material Testing Co. WLL To become the leading company in offering engineering services (material testing, third party inspection, consultation and engineering support services) to the Kuwaiti construction market.
13 Mission Sematco Soil & Engineering Material Testing Co. WLL To offer quality engineering services to the Kuwaiti construction market, utilizing the latest technology in testing equipment that is operated by well trained personnel as per international standards.
14 Sematco Soil & Engineering Material Testing Co. WLL Major Fields of Services: 1. Soil Investigation and in-situ testing (on shore & off shore) 2. Material Sampling & Testing (soils, aggregates, concrete and water) 3. Technical & Engineering Support 4. Third Party Inspection 5. Surveying (buildings, topographic and bathymetric)
15 Sematco Soil & Engineering Material Testing Co. WLL Personnel Equipment Process
16 Quality Control Measures in Personnel Sematco 1. Qualified Technicians with continuous training (Kuwaiti market lacks good certified technicians) 2. Encourage staff to be certified from different agencies like ACI, PE 3. Have library of international standards (ASTM, AASHTO, BS) and manuals (ACI).
17 Quality Control Measures in Equipment Sematco 1. All testing equipments are computer controlled 2. All equipments have up to date calibration certificates
18 Process Quality Control Measures in Sematco 1. Developed Procedures Manual 2. All Reports are computer generated with data entry at testing point. 3. Reports are printed on none copy able papers 4. Usage of Job Tracking System (Lab Information System)
19
20
21
22 Quality Control Measures in Sematco Process 5. All reports are revised and issued to conform to international standards. 6. Register with all government and oil sector agencies. 7. Certified from MPW 8. Accredited lab for total management system with ISO Working currently to obtain ISO Member of International Societies ASTM, ILAC, ACI
23
24
25 Take Away Key Messages Laboratory market should be regulated. Regular certification process should be implemented by MPW or KSE. None certified labs should not be allowed into government projects and projects supervised by consultants offices. Material quality control contracts should be independent of the contractor.
26 Thank You
Training Requirements. Quality Control Personnel Training
Training Requirements Quality Control Personnel Training 2 QC Personnel Training: Know Where to Find the Rules FDOT Section 105 FDOT Materials Manual Section 6.2 (RCP) Section 6.3 (Precast Box Culverts)
More informationACCAB. Accreditation Commission For Conformity Assessment Bodies
ACCAB Accreditation Commission For Conformity Assessment Bodies ACCAB Platinum Plus Accreditation For Certification Bodies, Inspection Bodies, Testing & Calibration Laboratories and Medical Laboratories
More informationAccreditation Body Evaluation Procedure for AASHTO R18 Accreditation
Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Final August 9, 2016 Page 1 of 12 Section Number Table of Contents Title of Section 0 Purpose 1 Scope 2 References 3 Objectives 4 Criteria
More informationSECTION 114 MATERIALS CERTIFICATION SCHOOLS PROGRAM
VIRGINIA DEPARTMENT OF TRANSPORTATION MATERIALS DIVISION MEMORANDUM GENERAL SUBJECT: MATERIALS CERTIFICATION SCHOOLS PROGRAM SPECIFIC SUBJECT: Revisions to the Materials Certification Schools policies
More informationMn/DOT Technical Certification Program
Mn/DOT Technical Certification Program Office of Construction and Innovative Contracting MNTRAC Meeting August 2010 Technical Certification Program (TCP) Introduction Why do we do what we do? The Code
More informationMATERIALS DIVISION MEMORANDUM SIGNATURE:
MATERIALS DIVISION MEMORANDUM GENERAL SUBJECT: Revision of Materials MOI Chapter 1 General Instructions NUMBER: MD 359-13 SPECIFIC SUBJECT: Revision of Materials MOI Section 115 Materials Certification
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationSECTION 115 MATERIALS CERTIFICATION SCHOOLS PROGRAM
SECTION 115 MATERIALS CERTIFICATION SCHOOLS PROGRAM The Materials Certification Schools (MCS) Program is offered by the Virginia Department of Transportation (VDOT) for individuals who wish to receive
More informationOverview of conformity assessment programs and ASTM International s related activities
Overview of conformity assessment programs and ASTM International s related activities African Organization for Standardization 21 June 2016 Tim Brooke Vice President Certification Training, and Proficiency
More informationSDDOT CONSTRUCTION MANUAL PROJECT MANAGEMENT SECTION CHAPTER 3 MATERIALS TABLE OF CONTENTS
SDDOT CONSTRUCTION MANUAL PROJECT MANAGEMENT SECTION CHAPTER 3 MATERIALS TABLE OF CONTENTS ITEM PAGE SDDOT MATERIALS MANUAL...3-2 ADMINISTRATION OF MATERIALS CERTIFICATION AND TESTING PROCEDURES...3-2
More informationInspection and Certification for Individual Farms, Smallholder Group Certification S S R A N A S R S C I E N T I S T
Inspection and Certification for Individual Farms, Smallholder Group Certification S S R A N A S R S C I E N T I S T What is Certification? Organic certification system is a quality assurance initiative,
More informationAccreditation Bodies in other
Accreditation Bodies in other WHO Regions Jeanette Twell 6July2011 Overview ILAC Accreditation International Standards vs Guidance Auditing (NATA) EQAS/Proficiency Testing Take home message 2 International
More informationSTANDARD FORM CPES (Testing) Engineer & Surveyor Selection Board Services
STANDARD FORM CPES (Testing) Engineer & Surveyor Selection Board Services 1a. Official Name of Firm 1b. Official Address of Office Performing the Work 1c. Name and Identification of Project On Which Submitting:
More informationLab Quality Management System- Technical Manager
TIPS ONLINE TRAINING & CERTIFICATION Information Brochure Training On Lab Quality Management System- Technical Manager Training Code: TIPS/T/LQMS/TM Page 1 of 7 Training Program On Laboratory Quality Management
More informationIAS Accreditation Overview. Mark Johnson, ICC
IAS Accreditation Overview Mark Johnson, ICC What We Will Cover IAS Background Overview of IAS Programs IAS Accreditation and Building Codes IAS Laboratory Accreditation Program 2 About IAS: Company Profile
More informationWorkshop Item 1 - ISO 9001: 2008 migration
Workshop Item 1 - ISO 9001: 2008 migration Joint IAF-ISO Communiqué on migration to ISO 9001: 2008 ISO 9001: 2008 does not contain any new requirements Accredited Certification to ISO 9001:2008 shall not
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES. Advisory Document on Tenders For Systems, Processes & Product Certifications
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES CAB Accreditation Advisory Document Document Title: Document Number: Advisory Document on Tenders For Systems, Processes & Product Certifications
More informationMinimum Qualifications for Special Inspectors, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
Minimum Qualifications for Special Inspectors, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians City of Novi Community Development Building Division 1 A. FABRICATORS A.1.
More informationPersonnel Certification
Personnel Certification Facilitating the Growth of a Global Economy Roy A. Swift, Ph.D. Senior Director, Personnel Credentialing Accreditation Programs American National Standards Institute Building a
More informationMINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
MINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians ORION TOWNSHIP BUILDING DEPARTMENT A. FABRICATORS A.1. Fabricators: Not
More informationThe Role of the American National Standards Institute (ANSI) Irwin Silverstein, Ph.D. IPEA
The Role of the American National Standards Institute (ANSI) 1 ANSI Activities American National Standard: Excipient GMP Accreditation of Product Conformity Bodies Certification to Excipient GMP 2 IPEA
More informationSCHEME MANUAL FOR ASTM TEST MONITORING CENTER RATER PERSONNEL CERTIFICATE PROGRAM
SCHEME MANUAL FOR ASTM TEST MONITORING CENTER RATER PERSONNEL CERTIFICATE PROGRAM INTERNATIONAL Standards Worldwide Issued June 8, 2011 Approved by CCP on July 1, 2011 BY AMERICAN SOCIETY FOR TESTING AND
More informationDCL PRODUCT CERTIFICATION
DCL PRODUCT CERTIFICATION ADDING CONFIDENCE TO GREEN BUILDING PRODUCTS AND MATERIALS 3 rd Annual Quality Assurance for Sustainable Construction Materials Conference and Workshop December 15-16, 2015 Abdulla
More informationR NOMINATED REPRESENTATIVE AND SIGNATORIES: RESPONSIBILITIES, QUALIFICATIONS AND APPROVAL
NOMINATED REPRESENTATIVE AND SIGNATORIES: RESPONSIBILITIES, QUALIFICATIONS AND APPROVAL Approved By: Chief Executive Officer: Ron Josias Executive Committee Reviewed By: SANAS Management and Stakeholders
More informationGreen Chemistry and Commerce Council Roundtable
NSF/ANSI Standards Green Chemistry and Commerce Council Roundtable Portland, Oregon July 10, 2008 Clif McLellan Director of Toxicology Services Overview of Presentation Introduction to NSF International
More informationIAF Strategic Plan to Identify and Achieve Expectations
Saturday,,, IAF Day IAF Strategic Plan to Identify and Achieve Expectations of the users of certified organisations like organisations, governments, end users, etc. Presentation by man Slide 1 Saturday,,,
More informationConformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Telecommunication Standardization Bureau (TSB) Consultant
Conformity Assessment Schemes and Interoperability Testing (1) Keith Mainwaring ITU Standardization Bureau (TSB) Consultant Moscow, 9-11 november 2011 Contents The benefits of conformity assessment Conformity
More informationFORENSIC LABORATORY DEVELOPMENT AND MANAGEMENT: INTERNATIONAL BEST PRACTICES BY AGWEYE, BENEDICT HEAD OF FORENSICS, EFCC
FORENSIC LABORATORY DEVELOPMENT AND MANAGEMENT: INTERNATIONAL BEST PRACTICES BY AGWEYE, BENEDICT HEAD OF FORENSICS, EFCC DISCLAIMER THIS PAPER IS NOT A LEGAL ADVISE OR OPINION IT DOES NOT SPEAK FOR OR
More informationThe American Society Of Phlebotomy Technicians, INC
The American Society Of Phlebotomy Technicians, INC Information Packet Charleston Location 1810 Trolley Rd. Suite A Summerville, SC 29485 843-970-8150 scoffice@asptsc.com Hickory Location P.O. Box 1831
More informationNew Mexico Technician Training and Certification Program (TTCP) M-TRAC Meeting
New Mexico Technician Training and Certification Program (TTCP) M-TRAC Meeting Joint Cooperative Effort St. Louis, MO August 178, 2010 How Does The Cooperative Effort Work? Who Utilizes the New Mexico
More informationSubcontractor Approval Form
Page 1 of 7 1. General Information Company / Partnership / Individual Address: Telephone: Email: Website: Main Contact Telephone: Email: Outline scope of company works: 2. Financial Information Bank Account
More informationThe U.S. Government s Role in Standards and Conformity Assessment
The U.S. Government s Role in Standards and Conformity Assessment ASTM International-Russian Federation on Technical Regulating and Metrology Coordinated Program Mary Saunders Chief, Standards Services
More informationIntegrated Food Safety System
Rance Baker NEHA Integrated Food Safety System Visionary Plan for Food Safety Training and Certifications for Federal/State/Local/Territorial/Tribal Regulators competent workforce doing comparable work
More informationTransitioning Your Laboratory To The New ISO/IEC 17025: 2017 Standard PAGE 26
Transitioning Your Laboratory To The New ISO/IEC 17025: 2017 Standard PAGE 26 NETWORKING / PEOPLE / COMMITTEES / LABORATORIES / REGIONAL EVENTS APRIL 2018 SPECIAL FEATURE Transitioning Your Laboratory
More informationMODULE B - PROCESS SUBMODULES B1.
Slide 1 MODULE B - PROCESS SUBMODULES B1. Organizational Structure B2. Standards Development: Roles and Responsibilities B3. Conformity Assessment: Roles and Responsibilities B4. Initiating Standards Projects
More informationUse of Standards and Conformity Assessment in U.S. Regulation: Perspective of the Private Sector
Use of Standards and Conformity Assessment in U.S. Regulation: Perspective of the Private Sector Standards Alliance Peru Workshop on Regulatory Decision Making October 29-30, 2014 Presentation Objectives
More informationCourse Description. Introduction of the Abu Dhabi Quality Conformity Council Construction & Materials Laboratory
Course Description Introduction of the Abu Dhabi Quality Conformity Council Construction & Materials Laboratory Presenter Abdulla Al Yazeedi Director of Technology & Science, Central Testing Lab Sector
More informationInspector for Stormwater Management. Department of Environmental Quality Office of Training Services
Inspector for Stormwater Management Department of Environmental Quality Office of Training Services Agenda Day 1 8:30 10:00 Mod. 1 Intro to VSMP 10:00 10:15 Break 10:15 11:00 Mod. 2 Basic Stormwater Principles
More informationPERFORMANCE OF THE ELECTRICITY DIVISION FOR FINANCIAL YEAR 2006/2007 AND FOCUS FOR FINANCIAL YEAR 2007/2008
MINISTRY PAPER No.: PERFORMANCE OF THE ELECTRICITY DIVISION FOR FINANCIAL YEAR 2006/2007 AND FOCUS FOR FINANCIAL YEAR 2007/2008 1.0 Purpose of Ministry Paper The purpose of this Ministry Paper is to inform
More informationInternational Laboratory Accreditation Cooperation. The ILAC Mutual Recognition Arrangement. global trust. Testing Calibration Inspection
International Laboratory Accreditation Cooperation The ILAC Mutual Recognition Arrangement Enhancing the acceptance of products and services across national borders Removing barriers to global trade Accreditation
More informationProgram Guidelines for Security Fenestration Rating and Certification Program Administered by Architectural Testing
Program Guidelines for Security Fenestration Rating and Certification Program Administered by Architectural Testing TABLE OF CONTENTS 1.0 FORWARD...2 2.0 GENERAL...2 3.0 REFERENCED DOCUMENTS...4 4.0 DEFINITION
More informationPRODUCT CERTIFICATION SCHEME FOR ORGANIC PRODUCTS
Ref No: RACS/SOP/36 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Organic
More informationProf.Dr. Sotiraq Dhamo Doc. Julian Naqellari The University of Tirana Accounting Department
Prof.Dr. Sotiraq Dhamo Doc. Julian Naqellari The University of Tirana Accounting Department 1. Key stakeholders in A&A Education 2. Current Third Level Qualification: University of Tirana (as an example)
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationInternationally Accredited Coating Applicator Training and Certification Programme
Internationally Accredited Coating Applicator Training and Certification Programme Welcome SSPC Trainthepainter is an internationally recognised Coating Applicator training and certification programme.
More informationACCAB. Accreditation Commission For Conformity Assessment Bodies
ACCAB Accreditation Commission For Conformity Assessment Bodies ACCAB Platinum Plus Accreditation For Certification Bodies, Inspection Bodies, Testing & Calibration Laboratories and Medical Laboratories
More informationITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability. Session 2: Conformity Assessment Principles
ITU Asia-Pacific Centres of Excellence Training on Conformity and Interoperability Session 2: Conformity Assessment Principles 12-16 October 2015 Beijing, China Keith Mainwaring ITU Expert Agenda 1. Context
More informationCERTIFICATION BODY (CB) APPROVAL REQUIREMENTS FOR THE IFFO RESPONSIBLE SUPPLY (IFFO RS) AUDITS AND CERTIFICATION
CERTIFICATION BODY (CB) APPROVAL REQUIREMENTS FOR THE IFFO RESPONSIBLE SUPPLY (IFFO RS) AUDITS AND CERTIFICATION Introduction The IFFO RS Certification Programme is a third party, independent and accredited
More informationWelder Qualification Testing to AS/NZS for accreditation. criteria. supplementary
supplementary criteria for accreditation Welder Qualification Testing to AS/NZS 2980 supplementary criteria for accreditation Welder Qualification Testing to AS/NZS 2980 Fourth edition August 2016 supplementary
More informationKENYA SCHOOL OF GOVERNMENT EMPLOYMENT OPORTUNITY (EXTERNAL ADVERTISEMENT)
KENYA SCHOOL OF GOVERNMENT EMPLOYMENT OPORTUNITY (EXTERNAL ADVERTISEMENT) 1. DIRECTOR, LEARNING & DEVELOPMENT - LOWER KABETE Reporting to the Director General, Campus Directors will be responsible for
More informationLaboratory Accreditation Building Confidence on Testing Quality
Laboratory Accreditation Building Confidence on Testing Quality Dr. George Anastasopoulos, Director (Conformity Assessment) & Prasanth S Ramakrishnan, MS, LEED-AP (Principal Staff & Program Manager) ASME
More informationName of the Institution. File / Code No. Name of the proposed course. Date of Inspection. NRC order No. & Date under which VT was constituted
FINAL CHECK LIST ON THE BASIS OF COMPLETE SCRUTINY OF APPLICATION AND ESSENTIAL DATA SHEET AS PER CLAUSE 7(7) & 8(5) OF THE NCTE REGULATIONS, 2014 PROVIDED BY THE APPLICANT INSTITUTION & VERIFICATION OF
More informationSection I. GENERAL PROVISIONS
LAW OF THE RUSSIAN FEDERATION NO. 5151-1 OF JUNE 10, 1993 ON CERTIFICATION OF PRODUCTS AND SERVICES (with the Additions and Amendments of December 27, 1995, March 2, July 31, 1998) Federal Law No. 154-FZ
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationQualification of National Board Team Leaders and National Board Representatives
Qualification of National Board Team Leaders and National Board Representatives The National Board of Boiler and Pressure Vessel Inspectors 1055 Crupper Avenue Columbus, Ohio 43229 614.888.8320 NB-290,
More informationTxDOT Internal Audit Materials and Testing Audit Department-wide Report
Materials and Testing Audit Department-wide Report Introduction This report has been prepared for the Transportation Commission, TxDOT Administration and management. The report presents the results of
More informationNATIONAL COMMISSION ON FORENSIC SCIENCE
NATIONAL COMMISSION ON FORENSIC SCIENCE Recommendation for the Accreditation of Digital and Multimedia Forensic Science Service Providers 1 Subcommittee Date of Current Version 25/02/16 Accreditation and
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationS. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7
Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:
More informationConference for Food Protection. Standards for Accreditation of Food Protection Manager Certification Programs. Frequently Asked Questions
Conference for Food Protection Standards for Accreditation of Food Protection Manager Certification Programs Frequently Asked Questions Q. What was the primary purpose for the Conference for Food Protection
More informationNavigating through the Risks and Challenges of implementing Green IT Projects
Navigating through the Risks and Challenges of implementing Green IT Projects Jerry Kopan, ITIL V3 Expert, V2 Service Manager, PMP, CMC, B.Sc. ITSM Project Manager and ITIL Trainer Page 1 Abstract Implementing
More informationThe Texas A&M University System. Internal Audit Department. Fiscal Year 2014 Audit Plan
Introduction The purpose of the Audit Plan is to outline audits and other activities the System Internal Audit Department will conduct during fiscal year 2014. The plan is developed to satisfy responsibilities
More informationKENYA ACCREDITATION SERVICE
KENAS-GUD-010 01 22/06/2013 22/07/2013 GUD 1 of 9 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature
More informationSIA Licensed Manned Guarding Mission Statement
Company Profile Introduction Main Event Security was created in 2005 and is based in the South West of England. We began as a small crowd safety and security management team assisting in the planning and
More informationAn unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail.
An unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail. Consolidated version of The Swedish Board for Accreditation
More informationWho is doing your calibration work?
The United Kingdom Accreditation Service Who is doing your calibration work? Are you confident that your goods and services and their component parts are based on measurements taken with correctly calibrated
More informationGlobal Wind Organisation CRITERIA FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members
More informationAl-Masader Al-Duwaliyah (AMAD) Overview
Al-Masader Al-Duwaliyah (AMAD) Overview History Founded in 2002 as a part of a major Saudi-European joint venture Focused on technology transfer to support local development while serving the public and
More informationWork Type Definition and Submittal Requirements Work Type: Pile Load Testing
MUST be qualified under Minnesota Department of Transportation Prequalification Program - Work Type 6.5 Pile Load Testing. The first section, Work Type Definition, provides a detailed explanation of the
More informationChoose only one. If you are registered in both category, PEPC & Accredited Checker, separate FORM H is required for each category.
FORM H REGISTRATION OF ENGINEERS ACT 1967 (REVISED 2015) APPLICATION FOR RENEWAL OF REGISTRATION FOR YEAR.... Regulation 20 of the Registration of Engineers Regulations 1990 (Revised 2015) A. APPLICATION
More informationKuwait Railroad & Rapid Transit Systems. Eng. Khaled A. Al-Awadhi General Manager Kuwait Metro Rapid Transport Co.
Kuwait Railroad & Rapid Transit Systems Eng. Khaled A. Al-Awadhi General Manager Kuwait Metro Rapid Transport Co. October2011 Contents Introduction Background Kuwait Rapid Transport System Kuwait Rail
More informationSECTION SPECIAL SYSTEMS. Website and Construction Cameras
PART 1 GENERAL SECTION 01121 SPECIAL SYSTEMS 1.01 WORK INCLUDED A. Project Construction Site Cameras and Video Streaming Servers B. Project Web site C. Network & Infrastructure D. Internet Connectivity
More informationConsumer Product Safety Certification IOM Workshop on Certification April 13, 2010
Consumer Product Safety Certification IOM Workshop on Certification April 13, 2010 This presentation has not been reviewed or approved by the Commission and may not reflect its views 1 What Products Must
More informationAPLAC Application to Enter the APLAC MRA or to Extend Scope - APLAC MR 003
ASIA PACIFIC LABORATORY ACCREDITATION COOPERATION MUTUAL RECOGNITION ARRANGEMENT (MRA) COUNCIL Application to Become a Signatory to the APLAC Mutual Recognition Arrangement (APLAC MRA) or to Extend Scope
More informationOIML MAA Annual Report
OIML MAA Annual Report NMi Certin B.V. (NL01) 2013 Table of contents Table of contents... 2 1. General information... 3 1.1. Issuing Authority information... 3 1.2. The organization... 3 1.3. Internal
More informationAPWA CERTIFICATIONS: WHAT ARE THEY REALLY ALL ABOUT?
APWA CERTIFICATIONS: WHAT ARE THEY REALLY ALL ABOUT? Keith Duncan, PE Senior Project Manager Olathe, KS Public Works APWA Certification Commission krduncan@olatheks.org VALUE OF CERTIFICATION Value to
More informationISO Certification For Laboratory Accreditation. Dr Amadou TALL Consultation
ISO 17025 Certification For Laboratory Accreditation Dr Amadou TALL Consultation ISO 17025 Certification ISO/IEC 17025 Global quality standard for testing and calibration laboratories. It is the basis
More informationSAI GLOBAL PRODUCT SERVICES
SMG03 Guidelines for Product Services Testing SAI GLOBAL PRODUCT SERVICES Guidelines for Product Services Testing A step by step guide for applicants and laboratories conducting type testing for certification
More informationInternational Telecommunication Testing Centre. Moscow, Russia, December 2009
training seminar CONFORMANCE TESTING Testing Centre (ITTC) Moscow, Russia, 10-11 December 2009 WTSA-08 Resolution 76: Conformance and Interoperability testing Paolo Rosa Head, Workshops and Promotion Division
More informationGold Label. The AAMA Certification
The AAMA Certification Gold Label on window and door products is the mark of integrity and Assurance of Quality that makes these products stand out among all others. American Architectural Manufacturers
More informationACCREDITATION AND REGULATION IN THE U.S. THE CHANGING LANDSCAPE
ACCREDITATION AND REGULATION IN THE U.S. THE CHANGING LANDSCAPE The Presenter Background OVERVIEW Accreditation Basics Current Status Issues Vice-President, Air Measurement Services, Southeast Region,
More informationCNAS-RC02. Rules for Sanctions against the Accreditation of Certification Bodies
CNAS-RC02 Rules for Sanctions against the Accreditation of Certification Bodies CNAS CNAS-RC02:2014 Page 1 of 7 Foreword This document is developed by CNAS. This document specifies rules for sanctions
More informationGlobal Standards Information. Standards Simulation Training for the USG ICES Workshop. July 6, 2010
Global Standards Information Standards Simulation Training for the USG ICES Workshop July 6, 2010 Today s Discussion Why use a Standards Simulation Exercise? Role of the U.S. Government and NIST in standards
More informationWHO/AFRO SLIPTA UPDATE
WHO/AFRO SLIPTA UPDATE ASLM2016 Capetown 3 December 2016 Background ASLM SLIPTA SLIPTA Progress Results General Observations Looking ahead SLIPTA 2.0? ADVANCING THE LABORATORY PROFESSION AND NETWORKS IN
More informationDEMO OF ISO/IEC 17025:2017 AWARENESS AND AUDITOR TRAINING PPT PRESENTATION KIT
DEMO OF ISO/IEC 17025:2017 AWARENESS AND AUDITOR TRAINING PPT PRESENTATION KIT CONTENTS OF ISO/IEC 17025:2017 AWARENESS AND AUDITOR TRAINING PPT PRESENTATIONS TRAINING KIT ISO/IEC 17025:2017 Awareness
More informationQuality Management Systems (ISO 9001:2015 and ISO 29001) Lead Auditor training (EY/IMSA Q03)
Quality Management Systems (ISO 9001:2015 and ISO 29001) Lead Auditor training (EY/IMSA Q03) Doha, 4 8 March 2018 IMSA is an IRCA/CQI Approved Training Provider Contents Section 1: About the program 04
More informationMonitoring System of Health Infrastructure Development
User Manual For Monitoring System of Health Infrastructure Development (Civil Works) Under Integrated MIS-GIS System (Version 1.0) (Date of Publication: 22nd Dec 2017) National Health Mission Department
More informationThe cooperation with professional associations possibly future for personnel certification Romana Hofmanova
The cooperation with professional associations possibly future for personnel certification 21.6.2011 Romana Hofmanova Agenda: About Czech Society for Quality Importance of personnel certificate t in crisis
More informationAccreditation: Assuring Competence
Accreditation: Assuring Competence Outline Background of SAC SAC Accreditation Programmes Accreditation Process What is conformity assessment? What is accreditation? Proof of Accreditation Benefits of
More informationAmerican Association for Laboratory Accreditation
Page 1 of 5 This document describes the accreditation requirements for organizations performing activities associated with Stationary Source Evaluation Testing per the requirements of ASTM D7036 (2004).
More informationFederal Communication Commission (FCC) Office of Engineering and Technology (OET) Program Accreditation Procedure
PJLA offers third-party accreditation services to Conformity Assessment Bodies (i.e. Testing and/or Calibration Laboratories, Reference Material Producers, Field Sampling and Measurement Organizations
More informationImplementation of INFCIRC 901: Promoting Certification, Quality Management and Sustainability of Nuclear Security Training
Implementation of INFCIRC 901: Promoting Certification, Quality Management and Sustainability of Nuclear Security Training Rhonda Evans Head, WINS Academy Presentation to the IAEA International Conference
More informationACCREDITATION: A BRIEFING FOR GOVERNMENTS AND REGULATORS
ACCREDITATION: A BRIEFING FOR GOVERNMENTS AND REGULATORS Accreditation is continuously gaining recognition as an important technical tool in the delivery of objectives across an increasing range of policy
More informationINDUSTRIAL ELECTRICIAN
INDUSTRIAL ELECTRICIAN Occupation Description Industrial s inspect, install, test, troubleshoot, repair, and service industrial electrical equipment and associated electrical and electronic controls. Service
More informationAccredited Testing Facility (ATF) 3 rd Year On-Site Audit Checklist
Facility Information: ATF Certificate #: Test Facility Name: Test Facility Representative: Address: City: State Zip: Phone Phone: Fax: Email: Facility Assessor: AWS Auditor: Date: Date: 3 rd Year On-Site
More information2.1. Scope of environmental site assessment
1. PURPOSE AND SCOPE This document contains the criteria used by the Québec Association of Environmental Auditors (QAEA) to determine whether a person may obtain the title of certified environmental site
More informationAPPROVED WORK ZONE TRAFFIC CONTROL TRAINING GUIDELINES TRAINING PROVIDERS / COURSES FOR CONTRACTORS / SUBCONTRACTORS
APPROVED WORK ZONE TRAFFIC CONTROL TRAINING GUIDELINES TRAINING PROVIDERS / COURSES FOR CONTRACTORS / SUBCONTRACTORS The South Carolina Department of Transportation will require work zone traffic control
More informationINDUSTRIAL ELECTRICIAN
INDUSTRIAL ELECTRICIAN Occupation Description "Industrial Electrician" means a person who inspects, installs, tests, troubleshoots, repairs, and services industrial electrical equipment and associated
More informationJOB DESCRIPTION: TECHNICAL ASSESSOR
Page of 6 Prepared by: Mulugeta Mekonnen Approved by: Araya Fesseha Signature: Signature: CONTENTS Purpose and scope... 2 2 References... 2 3 Selection Criteria... 2 4 Training... 3 5 Responsibilities...
More informationETHIOPIAN NATIONAL ACCREDITATION OFFICE. Minimum Requirements For The Operation Of Product Certification Bodies
ETHIOPIAN NATIONAL ACCREDITATION OFFICE Minimum Requirements For The Operation Of Product Certification Bodies April 2011 Page 1 of 7 NO CONTENTS Page 1. Introduction 2 2. Scope 2 3. Definitions 2 4 Management
More information