Chunabhatti, IDEMI. IDEMI- Eastern Express Highway, Opp. Everard Nagar Bus Stop, Chunabhatti, Sion, Mumbai
|
|
- Rudolf Copeland
- 6 years ago
- Views:
Transcription
1 MSME- TECHNOLOGY CENTRE, MUMBAI MSME- TECHNOLOGY CENTRE, MUMBAI Eastern Express Highway, Opp. Everard Nagar Bus Stop, Chunabhatti, Sion, Mumbai Chunabhatti, Tel /2/3/4 Fax: training@idemi.org, idemi@vsnl.net Website- Extesion Centre -MSME DI, Kurla Andheri Road, Andheri East, Mumbai Nagpur, Plot No. W-14, Hingna, MIDC Area, Nagpur Download TRAINING PLANNER App from Google Play Store & E-Book from Website Android App. Google Play Store QR Code Training Planner
2 INDIA INSTITUTE FOR DESIGN OF ELECTRICAL MEASURING INSTRUMENTS MSME TECHNOLOGY DEVELOPMENT CENTER MUMBAI INTRODUCTION was established in September 1969 with joint efforts of UNIDO / UNDP, Vienna and Ministry of Industry, Govt. of India. It is a Govt. of India Society under the Ministry of Micro, Small & Medium Enterprises for Service-to-industry organization for Skill Development Training programme. is providing services in the following areas: 1) Training for Skill Development & Capacity Building of Man Power in various subjects 2) Calibration of Electrical, Electronic, Pressure, Temperature, Flow, Mass, Volume & Dimension Measuring Instruments. 3) Electrical & Environmental Testing of Domestic Appliances & Electrical/Electronic products. 4) EMI / EMC Testing on Electronic gadgets & various testing for CE Marking 5) Field Services in Calibration & Testing 6) Design & Development of Prototype Instruments. 7) Tool Design & Documentation. 8) Manufacturing of Tools, Jigs & Fixtures, Critical Components, Precision jobs. 9) Batch Production services 10) Consultancy services for Laboratory accreditation as per ISO/IEC ) Consultancy services for QMS certification as per ISO is conducting also following Sponsored Training Programmes: 1. Entrepreneurship cum Skill Development Programme (ESDP) sponsored by Ministry of Micro Small & Medium Enterprises, Govt. of India. 2. Skill Development Training Programmes for youth of North East states under Capacity Building & Technical Assistance Scheme sponsored by Ministry of Development of North Eastern Region (DoNER), Govt. of India. 3. Skill Development Training Programmes for youth of Madhya Pradesh Sponsored by Madhya Pradesh Council of Employment & Training (MAPCET), Govt. of Madhya Pradesh. 4. High Quality Skill Training Programmes for Tribal Development support for Governments of various States. Activity at a Glance Design and Development Tool Design & Tool Room Calibration & Testing Training for Skill Development is a Govt. of India Society and Basically Service-to-Industry Organization MICRO, SMALL,& MEDIUM ENTERPRISES MSME- TECHNOLOGY CENTRE, MUMBAI Training for Skill Development & Capacity Building of Man Power Training Division has been devoted to Technical Manpower Development particularly from Industrial Sector & Information Technology Sector. Skill Development Training is a continuous education & is required by every Practicing Professional and Student for improving his/her competency to meet the greater demands & challenges of Industry. is not only giving the class-room training but it is also supported with various Laboratories for complete hands on experience through practical & demonstrations. is having State of Art Laboratories in Calibration, Industrial Automation, Embedded Technology, CAD / CAM & Animation. faculty members are well qualified & having immense practical experiences, profound insights, broad perspectives and ready to part tips, tricks and techniques gained during their lifetime to the attending participants. We always ensure that every participant carry back home lot of clarity & confidence on the subject through Theory, Practical, Demonstrations, Role Play, Live Project etc. This enhances the work performance of participant & there by fulfilling our objective of Skill Development. 's Skill-Development Training Programmes has built-in potential to generate Employment or a possibility to start working independently as a Self Entrepreneur. is also conducting the Capacity Building Training Programme for Principals, Faculty members & Senior officers with main focus on Behaviour Science through several Soft Skills like Inter Personnel Skills, HR Management, Communication & Presentation skills, Leadership, Decision Making, Team Building, Stress & Conflict Management etc. NABL Accd. Lab C0085, C0086, C0087, C0186, T1358 AICTE Approved & MSBTE Accredited Diploma Tool & Die Making Mechatronics & Robotics 3D Animation & Graphics More than 4 decades of Experience
3 3 TRAINING PROGRAMME IN CALIBRATION & TESTING OF MEASURING INSTRUMENTS & LABORATORY ACCREDITATION AS PER ISO / IEC : 2005 & ISO 9001 : 2008 Training Programmes on Calibration & Testing Practices (Electrical, Temperature, Pressure, Flow, Mass, Dimensional Metrology) Sr. No. TITTLE PROG CODE DURATION DATES INTAKE FEE / PARTICIPANT 1 Workshop on Dimensional Metrology D-227 D-228 D Days Jun Nov Feb /- 2 Workshop on Calibration of Pressure, Temperature & Flow Measuring Instruments D-150 D Days 8 10 Jun Dec /- 3 Workshop on Calibration of Electrical & Electronics Measuring Instruments D-200 D Days 1-2 Sept Feb /- Quality Related Training Programmes for ISO / IEC : 2005, ISO 9001 : General Requirements for the Competence of Testing & Calibration Laboratories & Internal Audit as per ISO / IEC : 2005 D-301 D-302 D-304 D Days May Jul Oct Jan /- 2 Workshop on Estimation & Evaluation of Total Uncertainty in Measurement as per NABL 141 D-300 D-303 D-305 D Days 5 6 May Aug Nov Feb /- 3 Certified Internal Quality Auditor for ISO D-350 D Days Jul Jan /- 4 ISO 50001:2011 Energy Management System D-352 D Days Sep Feb /- SERVICE TAX: Additional Service Tax of 14.5% as applicable as per Central Govt. notification on above training fees TAILOR MADE TRAINING PROGRAMMES: is also conducting special training programmes exclusively for one Company / Laboratory as per their requirements either at or at company's location on all the above subjects.
4 INTAKE FEE/PARTICIPANT Sl. No. Sl. No. 5th Dec., 2016 There are 12 batches of each course per year and 20 intake for each batch AICTE Approved 3 Years Diploma Course in Tool & Die Making Duration: Full Time 3 Years( 6 Sem)/Part Time 4 Years (8 Sem) Tool & Die Making Diploma involves providing knowledge & skills related to Design & Manufacturing of intricate and complex Tools and Dies of Die Casting Dies, Press Tools, Plastic Moulds, Jig Fixtures & Gauges Design, Metrology Quality Control and Production Planning and Management with Industrial Projects with Exposure to modern CAD/CAM Software and Machinery. * For detailed information please visit our website: of AICTE approved courses.
5 Ongoing CAD / CAM / CAE Programmes (Batches available as Daily, Evening & Saturday / Sunday special batches) (Batches available in every Month) Sr. No. TITLE ELIGIBILITY DURATION FEE / PARTICIPANT PROG. CODE SYLLABUS 1 Auto CAD 10th 50 Hrs. 4,000/- D-231 2D Drafting, 3D Drafting, Auto Lisp Programming, Assembly in 2D & 3D Assembly in 2D & 3D 2 CATIA V5-R24 Diploma/ 60 Hrs. 10,000/- D-235 Sketcher, Part Modeling, Assembly Module, Drafting, Surface Modeling 3 Unigraphics NX 10 Diploma/ 60 Hrs. 10,000/- D-236 Part Modeling, Surfacing Modeling, Assembly Modeling, Drafting 4 Creo Paramatric (Pro-E) Diploma/ 60 Hrs. 10,000/- D-234 Part Modeling, Surfacing Modeling, Assembly Modeling, Drafting 5 Solid Works Diploma/ 60 Hrs. 10,000/- D-239 Part Modeling, Surfacing Modeling, Assembly & Drafting 6 CNC Programming & Machining ITI/ Diploma/ 60 Hrs. 10,000/- D-233 Introduction of CNC Technology, Geometrical Basic of CNC Machine, Turning, Milling Technology Basics of CNC Machine, Programming Introduction to NC, CNC Program Generation & Transfer 7 DELCAM ITI/ Diploma/ 8 Advance Creo Diploma/ 9 UG CAM Diploma/ 60 Hrs. 12,000/- D-238 Introduction Power Shape, 2D Tool Path, 3D Tool Path, Tool Path Editing, NC Program Generation 40 Hrs. 12,000/- D-240 Mould design, Core Cavity extraction, Family Mould/ multiple cavities design. 50 Hrs. 12,500/- D-237 Concept of 2D & 3D CAM, 2D Tool Path, 3D Tool Path, Tool Path Editing, NC Program Generation Tool Path Sheet 10 Master CAM ITI/ Diploma/ 60 Hrs. 10,000/- D-232 2D Drafting, 3D Drafting, Surface of Source, Solid Modeling, 2D Machining & 3d Machining 11 Hyper Mesh Diploma/ 60 Hrs. 12,000/- D-389 Pre-Processing, Post Processing, Meshing, Geometric Editing, Morphing, Processing, Radioss Solver 12 Hyper Mesh & Hyper Form Diploma/ 90 Hrs. 20,000/- Pre-Processing, Post Processing, Meshing, Geometric Editing, Morphing, Processing Radioss Solver,One Step Radioss, Incremental Radioss Form Fee : Rs. 250/-+ Exam Fee as per Courses There are 4 batches for each courses per year and 30 intakes for every course SERVICE TAX: Additional Service Tax of 14.5% or as applicable as per Central Govt. notification on above training fees Courses also available at CAD/CAM/CAE Extension Centre Saki Naka, Andheri East. D-390
6 There is 1 batch in a year and 40 intake for every batch Fee:- Rs. 30,000/- Exam Fees Rs.- 800/-, Form Fees Rs.- 250/- Payments:- Fees to be paid in cash/cheque/dd in favor of, Mumbai AICTE Approved 3 Years Diploma Course in Robotics & Mechatronics Robotics & Mechatronics is rapidly evolving field with growing application in all engineering branches. It is four disciplines engineering field with concurrent methodology. This course has been framed in such a way that it will fulfill all the requirements of industries for perfect Robotics & Mechatronics System Design Engineer. * For detailed information please visit our website: of AICTE approved courses.
7 1. PIC MCU 2. Embedded C/C++ 3. Communication Protocol Implementation 4. Robotics-Interfacing with Motors & Sensors 5. ARM-Advanced RISC Machine (LPC2148) 6. Concept of RTOS 7. VLSI Design with FPGA/CPLD 8. PCB Designing 9. Python Programming on Raspberry Pi
8 DIPLOMA & CERTIFICATE COURSESIN ANIMATION, GRAPHICS, WEB, VFX, APP. & GAMES Fees: 1,00,000/- 30 intake 2 batches per year 30 intake, 1 batch per year Fees: 90,000/-, 30 intake 3 batches per year Fees: 60,000/-, 30 intake 3 batches per year Objective: The Silverlight Technology will give the power to create the advance web animation. Which is vastly used in web pages now a days. With the other developing tools, you can develop your web pages and maintain it to standard level. The usage of multimedia files developed by you, makes your page technically rich. Animation, Graphics & Special Effects Fees: 45,000/-, 30 intake 2 batches per year Fees: 90,000/-, 30 intake 3 batches per year 08 Months Software Covers: Adobe Photoshop, Maya, Adobe Illustrator, Corel Draw, In-Design, Adobe Premiere, FCP, Adobe After Effects.
9 DIPLOMA & CERTIFICATE COURSESIN ANIMATION, GRAPHICS, WEB, VFX, APP. & GAMES Fees: 30,000/-, 30 intake 4 batches per year Fees: 30,000/-, 30 intake 6 batches per year Compositing & Editing Fees: 30,000/-, 30 intake 3 batches per year Fees: 25,000/-, 30 intake 4 batches per year Fees: 10,000/-, 30 intake 6 batches per year Fees: 15,000/-, 30 intake 6 batches per year Fees: 40,000/-, 30 intake 3 batches per year Fees: 1,20,000/-, 30 intake 3 batches per year
10
11 Syllabus: In-Design (Making letter head, visiting Card etc.), Corel Draw (Making Logos, Symbol, & Graphics) and Photoshop (Photo Editing, Color Editing).
12 (Full Time/Part Time) Diploma in Tool & Die Making Diploma in Robotics & Mechatronics Diploma in 3D Animation & Graphics MICRO, SMALL,& MEDIUM ENTERPRISES MSBTE AICTE MSME- TECHNOLOGY CENTRE, MUMBAI S Full/Part time Diploma in Tool & Die Making Diploma course in Software Programming & Testing Computer Software & DTP INDIA NABL Accd. Lab C0085, C0086, C0087, C0186, T1358 ral ent Rly Line e ly Lin our R Harb na Sta bhatti tion Chu Dharavi C n Siotation S Tata Nagar Bus Stop Somya Ground ATI iety n Sio Sion sti hru iv S (E) la r Ku Sh oc rti S u Trim er Flyov Bhakti Dham Mandir Somya Ground Evrard Nagar Bus Stop Priyadarshani (RCF) Fax: (022) training@idemi.org, idemi@vsnl.net Web Site: Extesion Centre- MSME DI, Kurla Andheri Road, Andheri East, Mumbai Nagpur, Plot No. W-14, Hingna, MIDC Area, Nagpur Download TRAINING PLANNER App from Google Play Store & E-Book from Website Android App. Google Play Store QR Code Training Planner
CALENDAR OF TRAINING PROGRAMMES FOR THE YEAR
CALENDAR OF TRAINING PROGRAMMES FOR THE YEAR 2017-18 Course Code Title of Programme Course Dates of Commenceme nt Duration Timings Intake Capacity Eligibility criteria Fee per participant Contents in brief
More informationNSIC TECHNICAL SERVICES CENTRE The National Small Industries Corporation Ltd. (A Government of India Enterprise)
NSIC TECHNICAL SERVICES CENTRE The National Small Industries Corporation Ltd. (A Government of India Enterprise) ISO 9001 : 2008 Okhla Phase-III, Near Govind Puri Metro Station, New Delhi - 110020. Job
More informationDiploma in Graphics & Multimedia
FINAL CERTIFICATION AWARDED BY IMRTC - USA Diploma in Graphics & Multimedia THIS HIGHLY SPECIALIZED AND WORTH FULL DIPLOMA IS IDEALLY SUITED TO FOLLOWING INDIVIDUALS WHO ARE: Fresh Matriculations who would
More informationNot Just a Degree. Join 100% Job Oriented Industry Ready Distance & Regular Education. Your Next Aim to A Successful Career
Not Just a Degree. Join 100% Job Oriented Industry Ready Distance & Regular Education Your Next Aim to A Successful Career GTECH INSTITUTE FOR IT & MANAGEMENT GOVT. REGD. SKILL DEVELOPMENT ORGANIZATION
More informationTechnology Application Centre
Get a technological edge for your business Technology Application Centre www.siemens.co.in Over the last decades, Machine Tool manufacturing has undergone significant changes due to growing demand for
More informationISO 9000:2015 LEAD AUDITOR
FINAL CERTIFICATION AWARDED BY PECB CANADA ISO 9000:2015 LEAD AUDITOR Training Program This course is based on the ISO quality management system (QMS) standard ISO 9001:2015 Lead Auditor, the guideline
More informationISO LEAD AUDITOR TRAINING
FINAL CERTIFICATION AWARDED BY PECB CANADA ISO 22301 LEAD AUDITOR TRAINING & CERTIFICATION (Business Continuity Management) Master the Audit of Business Continuity Management System (BCMS) based on ISO
More informationCOBIT 5 Foundation Workshop
COBIT 5 Foundation Workshop Dear Members, ISACA Pune chapter is pleased to organize Two / Three Days COBIT-5 Foundation course Dates of Training & Workshop: Date: Friday, 19 th Dec 2014 and Saturday, 20
More informationAWS-SCWI. American Welding Society Senior Certified Welding Inspector. Certification Programs for the Year 2018
BETZ ENGINEERING & TECHNOLOGY ZONE Educational & Research Division AWS-SCWI American Welding Society Senior Certified Welding Inspector Certification Programs for the Year 2018 Authorized International
More informationMBA (Part Time) Batch Program Structure
MBA (Part Time) 2019-21 Batch Program Structure MBA (Part Time) is a 30 months program conducted separately on Weekdays in the evening Monday to Friday and Weekends Saturdays & Sundays from morning to
More informationISO Lead Auditor Program Environmental Management System Training Program
FINAL CERTIFICATION AWARDED BY PECB CANADA ISO 14001 Lead Auditor Program Environmental Management System Training Program Master the Audit of Environmental Management Systems (EMS) based on ISO/14001
More informationAbout NIELIT. Demands for Courses in Computer Hardware
About NIELIT NIELIT is an autonomous scientific society under the administrative control of Department of Electronics and Information Technology (DeitY), Ministry of Communications & Information Technology,
More informationStudy Scheme & Syllabus Of B.Tech Production Engineering 2014 onwards
BOS/PE/1 Study Scheme & Syllabus Of B.Tech Production Engineering 2014 onwards Guru Nanak Dev Engineering College (An Autonomous College U/S [2(f) and 12 (B) of UGC Act 1956) NBA Accredited Programmes
More informationDEVELOP YOUR SKILLS & GET A REPUTED JOB
DEVELOP YOUR SKILLS & GET A REPUTED JOB JOIN 100% JOB ORIENTED INDUSTRY READY SKILL DEVELOPMENT COURSES GTECH INSTITUTE FOR IT & MANAGEMENT GOVT. REGD. SKILL DEVELOPMENT ORGANIZATION ISO 9001:2015 CERTIFIED
More informationIPC Certification Scheme IPC QMS/EMS Auditors
Page 1 of 16 International Personnel Certification Association I P C CERTIFICATION SCHEME IPC QUALITY/ENVIRONMENTAL MANAGEMENT SYSTEM AUDITORS ISSUE 1 Page 2 of 16 International Personnel Certification
More information2018 CALENDAR OF ACTIVITIES
2018 CALENDAR OF ACTIVITIES WHO WE ARE AND WHAT WE OFFER Ý Public Trainings Technical Sessions Reviews GMM Other Chapter Activities Conferences Professionals Night ISACA was incorporated by individuals
More informationEXAMINATION FOR DEGREE IN MASTER OF ENGINEERING (REVISED 2008 COURSE) Rs. 1440/- PER SEMESTER + Exam. Form Rs. 30/-
M.E. Production (CAD/CAM) Electrical (Control System) Electrical (Power System) Production (Manu. & Auto) October/April 20. University of Pune Price : Rs. 30/ Seat No :... Sr. No. :... EXAMINATION FOR
More informationISO Lead Auditor Program Risk Management System (RMS) Training Program
FINAL CERTIFICATION AWARDED BY PECB CANADA ISO 31000 Lead Auditor Program Risk Management System (RMS) Training Program ISO 31000 Lead Auditor Risk Manager training enables you to gain comprehensive and
More informationCertificate in Security Management
Certificate in Security Management Page 1 of 6 Why Attend This course will provide participants with an insight into the fundamentals of managing modern and effective security operations. It will address
More informationBatch Programme Structure
2019-20 Batch Programme Structure Executive PGDM is 15 months full-time Management Programme (generally known as Fast Track MBA), which is ideal for junior and middle level executives who need a management
More informationPG Certificate. Embedded, Internet Of Things & Android
PG Certificate in Embedded, Internet Of Things & Android (Project Based) A Corporate Member of FITT-IIT Delhi An Initiative by Industry Experts from Cadence, Atrenta & Patni with qualification from IITs
More informationSymbiosis Institute of Technology, Pune Bachelor of Technology (Electronics & Telecommunication) Programme Structure
B.Tech (E & TC) 218-22 Programme Structure 218-22 1. OBJECTIVE B.Tech is a full-time four year graduation programme, which aims at transforming a student into a technically sound professional. The syllabus
More informationIME CADCAM TRAINING COURSE 2018 SCHEDULE Petaling Jaya (Date change without prior notice) Update as at
(Date change without prior notice) Update as at 09-01-2018 PROGRAMME TITLE CODE J-Duration Jun Jul Aug Sept Oct Nov Dec SOLIDWORKS 3D Modeling Upgrade S-UPG 28 19 16 27 18 22 20 Essentials S-ESS 4 days+2days
More informationFREQUENTLY ASKED QUESTIONS (FAQ)
Version: V4.0 FREQUENTLY ASKED QUESTIONS (FAQ) Current promotion scheme In order to promote the International Day of Yoga, the stage-1 (theory) exam for both Level 1 and Level 2 will be free of cost. This
More informationDESIGN (DES) Design (DES) San Francisco State University Bulletin
DESIGN (DES) DES 210 Industrial Science (Units: 3) Nature, properties, and processing of common industrial materials used in the design and production of today's manufactured products: metallics, plastics,
More informationHead office: BALANAGAR, HYDERABAD A.P., INDIA. Ph: , , , , Fax:
Head office: BALANAGAR, HYDERABAD - 500 037. A.P., INDIA. Ph: 040-23771959, 23776156, 23772747, 23772748, Fax: 040-23772658 E-Mail: citdplacements@citdindia.org, www.citdindia.org Branch Offices Sub-Centre:
More informationMaster the Audit of Information Security Management Systems (ISMS) based on ISO/IEC 27001
Master the Audit of Systems (ISMS) based on ISO/IEC 27001 Why should you attend? Auditor training enables you to develop the necessary expertise to perform an System (ISMS) audit by applying widely recognized
More informationInternationally Recognised Courses Affordable Courses Job Guarantee
Career prospects in Hardware & Networking courses in India. Nearly a decade ago, computer hardware and networking was not considered as a very lucrative career option in India but currently, IT, Computer
More informationISO9001:2015 LEAD IMPLEMENTER & LEAD AUDITOR
ISO9001:2015 LEAD IMPLEMENTER & LEAD AUDITOR JPCANN ASSOCIATES LTD #58 NSAWAM ROAD, AVENOR JUNCTION, KOKOMLEMLE-ACCRA Office lines: +233 302 242 573 / +233 302 974 302 Mobile: +233 501 335 818 20 www.corptrainghana.com
More informationLaboratory Setup vis-a-vis NABL ACCREDITATION
Laboratory Setup vis-a-vis NABL ACCREDITATION National Accreditation Board For Testing and Calibration Laboratories (NABL) An Autonomous body under the aegis of Department of Science & Technology, Government
More informationRevised November EFESC Handbook
Revised November 2015 EFESC Handbook 1 Table of Contents EFESC Handbook... 1 Table of Contents... 2 Handbook EFESC... 4 1 Background and objectives... 4 1.1 Sectoral developments... 4 1.1 Objectives...
More informationPROJECT MANAGEMENT PROFESSIONAL (PMP)
PROJECT MANAGEMENT PROFESSIONAL (PMP) EXAM PREPARATION TRAINING WHAT IS PMP? Government, commercial and other organizations employ PMP certified project managers in an attempt to improve the success rate
More informationINDIAN SOCIETY FOR NON-DESTRUCTIVE TESTING Mumbai Chapter ANNOUNCEMENT NDT LEVEL III REFRESHER/TRAINING COURSES AT MUMBAI, INDIA February / March 2019
Dear All NDT Personnel INDIAN SOCIETY FOR NON-DESTRUCTIVE TESTING Mumbai Chapter ANNOUNCEMENT NDT LEVEL III REFRESHER/TRAINING COURSES AT MUMBAI, INDIA February / March 2019 ISNT Mumbai Chapter is happy
More informationISACA MANILA CHAPTER CALENDAR OF ACTIVITIES
MANILA CHAPTER 2017 CALENDAR OF ACTIVITIES 2017 MANILA CALENDAR OF ACTIVITIES GMM Professionals Night Public Trainings Reviews Conferences Technical Session & MANILA PROFILE HISTORY AND MISSION Who we
More informationC n e. Your Success Story Being Here... Sample Certificate. Sample Markssheet. An ISO 9001:2008 Certified Organisation
Sample Certificate Sample Markssheet Your Success Story Being Here... C.O. : Opp. Old Petrol Pump, Raja Bazar, Near Gatewell Hospital, Patna-14, H.O. & Regd. Off. : Avantika Rohini, New Delhi, Mob: 9304857262,
More informationLab Quality Management System- Technical Manager
TIPS ONLINE TRAINING & CERTIFICATION Information Brochure Training On Lab Quality Management System- Technical Manager Training Code: TIPS/T/LQMS/TM Page 1 of 7 Training Program On Laboratory Quality Management
More informationISACA MANILA CHAPTER CALENDAR OF ACTIVITIES
MANILA CHAPTER 2017 CALENDAR OF ACTIVITIES 2017 MANILA CALENDAR OF ACTIVITIES GMM Professionals Night Public Trainings Reviews Conferences Technical Session & MANILA PROFILE HISTORY AND MISSION Who we
More informationFrequently Asked Questions (FAQ)
Version: V2.3 Frequently Asked Questions (FAQ) Section 1-General Section 2-Examination process Section 3-Applying for certification Section 4-Registry of successful yoga Professionals Section 1 General
More informationCertStore is a ISO (International Standard Organization) Certified and Approved by Govt. Of India.
CertStore (The Certification Store) A complete certification online and offline store where you can accomplish any of IT certification and Training. CertStore is master and specialized to deliver the IT
More informationISO 9001 : 2015 Certified
Since 2002 SANJARY EDUCATIONAL ACADEMY Society Registered, No. 347 / 08, Government of Telangana Registered with Ministry of Commerce & Industry, Directorate General of Foreign Trade, Govt. of India. Registered
More informationFrequently Asked Questions (FAQs) for Trainer
Frequently Asked Questions (FAQs) for Trainer 1 What is a Training of Trainers program (ToT)? Training of Trainers (ToT) is a program for the development of training delivery skills of those who wish to
More informationBLAZE 600M HIGH-ACCURACY BLUE LIGHT MEASUREMENT SYSTEM PRODUCT BROCHURE
BLAZE 600M HIGH-ACCURACY BLUE LIGHT MEASUREMENT SYSTEM PRODUCT BROCHURE BLAZING SPEED, DAZZLING PERFORMANCE The BLAZE 600M portable blue light measurement system from Hexagon Manufacturing Intelligence
More informationMSIT System Private Limited
MSIT System Private Limited (IT Training Institute) Registered under the companies Act 2013, Ministry of corporate affairs, Government of India. CIN of the Company is U72900BR2017PTC033808, www.msitcomputer.com
More informationCapacity Enhancement Courses
1. Certification Courses Capacity Enhancement Courses If you are looking to advance your academics in the tech world or to gain prospects, ALIET is the right choice. It deals with students in a regular
More informationResource Inspections Canada Inc. Certification Scheme Requirements
1. Purpose To describe the requirements for certification scheme for certified calibration laboratory technician for mechanical calibrations conducted by Resource Inspections Canada Incorporated. This
More informationACCA Diploma in. Starting this January! International Financial Reporting (DipIFR)
ACCA Diploma in International Financial Reporting (DipIFR) Starting this January! Suite 4, Level 1, Tower Business Centre, Tower street, Swatar, BKR4013 +356 21 314 896 info@aimacademy.com.mt Overview
More informationPECB Certified ISO Lead Auditor. Master the Audit of Occupational Health and Safety Management System (OHSMS) based on ISO 45001
Certified Lead Auditor Master the Audit of Occupational Health and Safety Management System (OHSMS) based on Why should you attend? is the first global Occupational Health and Safety Management System
More informationCIMA Certificate BA Interactive Timetable
CIMA Certificate BA Interactive Timetable 2018 Nottingham & Leicester Version 3.2 Information last updated 09/03/18 Please note: Information and dates in this timetable are subject to change. Introduction
More informationMaster degree program Technical legislation, standardization and quality management
The experience of the Technical University of Sofia in education about standardization Master degree program Technical legislation, standardization and quality management Opened in 2007 at the Faculty
More informationTraining Catalog. Decker Consulting GmbH Birkenstrasse 49 CH 6343 Rotkreuz. Revision public. Authorized Training Partner
Management and Information Technology Solutions Decker Consulting GmbH Training Catalog Decker Consulting GmbH Birkenstrasse 49 CH 6343 Rotkreuz Revision 9.1 05.12.2018 public Authorized Training Partner
More informationContinuous Professional Development (CPD) Manual
Continuous Professional Development (CPD) Manual 2019 Version 4.1 TABLE OF CONTENTS Definitions... 2 Continuous Professional Development (CPD)... 3 SCA s commitment to the highest global professional standards...
More informationComputer Information Science xxx
1 xxx The mission of the Faculty is to provide future-focused, studentcentred programmes that prepare students for the dynamic Information Systems and Information sectors of the UAE. CIS programme graduates
More informationVision Develop ethically sound global professionals.
FM Academy (FMA) is an educational institution located at Kaloor, Kochi. FMA provides expert coaching for CMA (Certified Management Accountant) and CPA (Certified Public Accountant), the best-known credentials
More informationCertified Reliability Engineer (CRE) Workshop
Certified Reliability Engineer (CRE) Workshop Organized by Mahindra Institute of Quality (MIQ) and Institute of Quality and Reliability (IoQR) 23 to 27 July 2018 At Pune Lead Faculty Hemant Urdhwareshe
More informationNATIONAL CERTIFICATION BOARD. ANNOUNCEMENT ISNT Level III Training & Certification Programme APRIL MAY 2018, MUMBAI, India
Indian Society for Non Destructive Testing (Regd. Society: S. No. 49 of 1981) Module No. 60 & 61, Garment Complex, SIDCO Industrial Estate, Guindy, Chennai 600032 Tele: 044 22500412, 044 42038175 E Mail:
More informationResource Inspections Canada Inc. Certification Scheme Requirements
1. Purpose To describe the requirements for certification scheme for certified calibration laboratory technician for dimensional calibrations conducted by Resource Inspections Canada Incorporated. This
More informationISO Lead Implementation
FINAL CERTIFICATION AWARDED BY IMRTC - USA ISO 22000 Lead Implementation Training Program ISO 22000 FOOD SAFETY MANAGEMENT SYSTEM (FSMS) Course Introduction Food safety management systems (FSMS) are intended
More informationASTON UNIVERSITY PROGRAMME SPECIFICATION
ASTON UNIVERSITY PROGRAMME SPECIFICATION Programme Title UCAS/JACS School/Subject Area Final Award Interim Awards Mode(s) of Study Normal Length of Programme Total Credits Programme Accredited By Dates
More informationMIT DIPLOMA IN COMPUTER INTEGRATED MANUFACTURE (LEVEL 5) MN COURSE INFORMATION
CNC Programming Course Code: 22910 To develop CNC programming procedures for machining centres and turning centres. Anyone with an interest in the programming of CNC machinery or in the CAD/CAM industry.
More informationWORLD CLASS PROGRAMS IN IMAGE, STYLE, WARDROBE CONSULTING & SOFT SKILLS TRAINING
WORLD CLASS PROGRAMS IN IMAGE, STYLE, WARDROBE CONSULTING & SOFT SKILLS TRAINING GET WORLD CLASS TRAINING, PRACTICAL EXPOSURE, BUSINESS ENABLEMENT SUPPORT, AND CERTIFICATION TO BUILD CREDIBILITY START
More informationCourse Details. OUR VISION To empower people to achieve their aspirations by using Information and Communication Technologies
Course Details OUR VISION To empower people to achieve their aspirations by using Information and Communication Technologies OUR MISSION To be the premier corporate resource delivering relevant products
More informationEXAM PREPARATION GUIDE
EXAM PREPARATION GUIDE PECB Certified ISO/IEC 17025 Lead Auditor The objective of the PECB Certified ISO/IEC 17025 Lead Auditor examination is to ensure that the candidate possesses the needed expertise
More informationIT Auditing and IT Fraud Detection
IT Auditing and IT Fraud Detection Page 1 of 7 Why Attend In today s world, IT fraud prevention and investigation have become an everyday part of corporate life and auditors must gain expertise in this
More informationCertified Cyber Security Specialist
Certified Cyber Security Specialist Page 1 of 7 Why Attend This course will provide participants with in-depth knowledge and practical skills to plan, deliver and monitor IT/cyber security to internal
More informationN/A. Engineering (MEng) July 2014
Faculty of Engineering & Informatics School of Engineering Programme Specification Programme title: MSc Mechanical Engineering Academic Year: 2017/2018 Degree Awarding Body: Partner(s), delivery organisation
More informationDEMO OF ISO/IEC 17025:2017 AWARENESS AND AUDITOR TRAINING PPT PRESENTATION KIT
DEMO OF ISO/IEC 17025:2017 AWARENESS AND AUDITOR TRAINING PPT PRESENTATION KIT CONTENTS OF ISO/IEC 17025:2017 AWARENESS AND AUDITOR TRAINING PPT PRESENTATIONS TRAINING KIT ISO/IEC 17025:2017 Awareness
More informationCertification Requirements Competency-based Quality Management Engineer (QME) Certification Program
Certification Requirements Competency-based Quality Management Engineer (QME) Certification Program Exemplar Global Personnel Certification Programs Exemplar Global is accredited by the Joint Accreditation
More informationAccess Control and Physical Security Management. Contents are subject to change. For the latest updates visit
Access Control and Physical Security Management Page 1 of 6 Why Attend Today s security landscape requires individuals and businesses to take the threat to safety and security seriously. Safe and secure
More informationThe Application of CAD/CAM in the Design of Industrial Products
2018 International Conference on Medicine, Biology, Materials and Manufacturing (ICMBMM 2018) The Application of CAD/CAM in the Design of Industrial Products Hequn Liu Xianning Vocational Technical College,
More informationFINAL CERTIFICATION AWARDED BY IMRTC - USA CERTIFIED MARKETING PROFESSIONAL CPM. Program is offered by: 3D Educators Trainers & Consultants
FINAL CERTIFICATION AWARDED BY IMRTC - USA CERTIFIED MARKETING PROFESSIONAL CPM Training Program Program is offered by: 3D Educators Trainers & Consultants Page # 1 Suite # 7, Noble Heights, Opposite Sales
More informationISO 9001 : 2015 Certified
Since 2002 SANJARY EDUCATIONAL ACADEMY Society Registered, No. 347 / 08, Government of Telangana Registered with Ministry of Commerce & Industry, Directorate General of Foreign Trade, Govt. of India. Registered
More informationANDROID APPLICATION DEVELOPMENT COURSE Training Program
ANDROID APPLICATION DEVELOPMENT COURSE Training Program This Android Application Development Course is a 24 Hours Training Program with Certification. The program is to be developed for Matriculated, Intermediate
More informationDIABLO VALLEY COLLEGE CATALOG
ART DIGITAL MEDIA ARTDM Toni Fannin, Dean Applied and Fine Arts Division Business and Foreign Language Building, Room 204 Possible career opportunities Digital media or graphic design jobs cover all ends
More informationACCA DipIFR. Diploma in. International Financial Reporting
ACCA DipIFR Diploma in International Financial Reporting OVERVIEW The Diploma in International Financial Reporting (DipIFR) is an internationally recognized qualification in Financial Accounting using
More informationISO 9001 : 2015 Certified
Since 2002 SANJARY EDUCATIONAL ACADEMY Society Registered, No. 347 / 08, Government of Telangana Registered with Ministry of Commerce & Industry, Directorate General of Foreign Trade, Govt. of India. Registered
More informationSociety for Applied Microwave Electronics Engineering & Research Millimeter Wave Technology Centre
Advertisement No.: 09/2018 WALK-IN INTERVIEW FOR CONTRACT POSITIONS Society for Applied Microwave Electronics Engineering & Research (SAMEER) is an autonomous Research & Development Institute under the
More informationISO STANDARD IMPLEMENTATION AND TECHNOLOGY CONSOLIDATION
ISO STANDARD IMPLEMENTATION AND TECHNOLOGY CONSOLIDATION Cathy Bates Senior Consultant, Vantage Technology Consulting Group January 30, 2018 Campus Orientation Initiative and Project Orientation Project
More informationPMP & CAPM. Preparation
PMP & CAPM User rating* Preparation Getting PMP certified has certainly helped me gain deep insight into strategic project management. Putting PMP after my name in my email signature has given me some
More informationProfessional Evaluation and Certification Board Frequently Asked Questions
Professional Evaluation and Certification Board Frequently Asked Questions 1. About PECB... 2 2. General... 2 3. PECB Official Training Courses... 4 4. Course Registration... 5 5. Certification... 5 6.
More informationGLS UNIVERSITY. Faculty of Computer Technology Master of Computer Applications (MCA) Programme
GLS UNIVERSITY Faculty of Computer Technology Master of Computer Applications (MCA) Programme 1. GLS University s Master of Computer Applications programme is a three-year full-time postgraduate programme
More informationFULL TIME PROSPECTUS
FULL TIME PROSPECTUS 043 742 0235 www.elmi.co.za ELMI - Full Time Programmes Making dreams come true since 2008 Every day we help our students identify their dreams, build up their confidence to believe
More informationManufacturing PROGRAMS STUDY
PROGRAMS STUDY of Computer Numeric Control Machining 724 Basic Certificate (B.C.) 19 Credit Hours (CH) 15 CH 123 CNC Milling Operations & Programming 3 137 CNC Turning Operations & Programming 3 19 CH
More informationToll Free: 1(877) Website:
Management Certification for Manufacturing Professionals (Customized) Course No. 324 (DET Course ID: 1073267) This course consists of 4 courses which prepare students to have the knowledge and skills in
More informationISO/IEC INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO/IEC 27006 Second edition 2011-12-01 Information technology Security techniques Requirements for bodies providing audit and certification of information security management systems
More informationTraining programme. Hands-On Protection Relay School
Training programme on Hands-On Protection Relay School March 16-20, 2015 Power Systems Division Central Power Research Institute (Govt. of India Society, Ministry of Power) Prof. Sir. C.V.Raman Road, P.B.No.8066,
More informationZero Defect Zero Effect (ZED) Certification Scheme Rating Process
QUALITY COUNCIL OF INDIA (QCI) 2 nd Floor, Institution of Engineers Building, Bahadur Shah Zafar Marg, New Delhi 110002 Phone: +91-11-2337 8056 / 57; Fax: +91-11-2337 8678; Web: www.qcin.org Zero Defect
More informationThe Institute of Chartered Accountants of Sri Lanka
The Institute of Chartered Accountants of Sri Lanka 30A, Malalasekera Mw, Colombo 07. SPECIAL NOTICE STRATEGIC LEVEL EXAMINATION JUNE 2012 TO ALL STRATEGIC LEVEL CANDIDATES (1 st Attempt) Please draw the
More informationTOOL AND DIE MAKER INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification.
TOOL AND DIE MAKER Occupation Description Tool and Die Maker means a person who makes, repairs and tests dies, cutting tools, jigs, fixtures, moulds, gauges and special hand tools by laying out, setting-up,
More informationIPC Certification Scheme IPC Management Systems Auditors
Page 1 of 16 International Personnel Certification Association I P C CERTIFICATION SCHEME IPC MANAGEMENT SYSTEMS AUDITORS ISSUE 4 Page 2 of 16 International Personnel Certification Association I P C CERTIFICATION
More informationCATHODIC PROTECTION Training Program (PROFESSIONAL AND ADVANCE LEVEL)
FINAL CERTIFICATION AWARDED BY IMRTC - USA CATHODIC PROTECTION Training Program (PROFESSIONAL AND ADVANCE LEVEL) The application of protective coatings represents the most widely adopted means of controlling
More informationAcademic Course Description
BEC502 MICROPROCESSOR AND MICROCONTROLLER Course (catalog) description Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electronics and Communication Engineering
More informationCertification Process Household and Similar Equipment
Certification Process Household and Similar Equipment Ordinance No. 371, of December 29, 2009 Objective: Evaluation of household and similar appliances, with a focus on security requirements in order to
More informationCEM class in N.E.O. Northern Ohio Chapter. DATES: March 24-28, LOCATION: Goodyear Global HQ in Akron, OH. Curtis Dixon
Curtis Dixon Subject: FW: AEE Northern Ohio Chapter CEM Course Northern Ohio Chapter CEM class in N.E.O. DATES: March 24-28, 2014 LOCATION: Goodyear Global HQ in Akron, OH 1 CEM : The Mark of an Energy
More informationAccreditation process (LA-I-02)
Accreditation process (LA-I-02) Bureau of Laboratory Accreditation Department of Science Service Ministry of Science and Technology 75/7 Rama VI Road, Ratchathewi District, Bangkok 10400 Tel: 0-2201-7325,
More informationCOURSE INFORMATION PACK
COURSE INFORMATION PACK Contact Details (Head Office) Bellville Campus Bellville Business Park DJ Wood Street Bellville 7530 Tel: 021 949 5036/7 Fax: 021 948 1859 Email: info@prestigeacademy.co.za Website:
More informationOverview of conformity assessment programs and ASTM International s related activities
Overview of conformity assessment programs and ASTM International s related activities African Organization for Standardization 21 June 2016 Tim Brooke Vice President Certification Training, and Proficiency
More informationArchitectural Technology
Architectural Technology The Architectural Technology curriculum prepares individuals to apply technical knowledge and skills to the fields of architecture, construction, construction management, facility
More informationTITLE (Mr, Mrs, Ms, Dr, etc) MALE FEMALE SURNAME FIRST NAME DATE OF BIRTH NATIONALITY
LMS Academy 1 Anand Dhaam Opposite To Kukrail Picnic Spot Gate Faridi Nagar. Lucknow Pin - 226015. INDIA Phone: +91-9554645464 Mobile: +91-9839960011 Fax: +91-8957101005 Website: http://www.lmsacademy.com
More informationSchool of Reliability Maintenance
School of Reliability Maintenance COURSE INFORMATION 2018-19 Public Training Onsite Training Certification Prog. University Prog. Areas of Application Condition Monitoring Reliability Engineering Asset
More informationIIBM Institute Of. Business Management. Prospectus. Certified Manager Programs
IIBM Institute Of Business Management Prospectus Certified Manager Programs 1 Message from Director s Desk Dear aspirants, I welcome you all on behalf of the IIBM Institute of Business Management. IIBM
More information