Asia

Transcription

1 Administered by PRI July 21, 2011 Mr. Mike Hushek Quality Assurance Manager Dear Mike Hushek The report of the Nadcap accreditation audit of your facility on November 09 - November 12, 2010 has been approved for Nadcap accreditation. Nadcap accreditation entitles your organization to appear in the Qualified Manufacturers List (QML). Accordingly, we have enclosed your certificate(s) of accreditation/compliance, scope of accreditation and a logo sheet with a description on the uses of the PRI Mark of Conformity. Please note that your certificate has no expiration date. All customers are directed to the Online QML at for relevant accreditation dates and information. You will not receive an updated certificate following any future reaccreditation audits. We are also pleased to advise you that this letter is evidence of your conformance to the PRI/Nadcap Audit Criteria AC7004 Standard Quality Program Requirements. **Note that if any changes occur within your company (i.e., ownership, key managerial staff, equipment, company name, quality manager, address, etc.) that may affect your capability or scope of accredited activities, you are required to notify PRI Staff immediately by completing the "Notification of Change/Request for Revised Certification" form located in eauditnet.com/resources/public Documents/General Documents. We would like to congratulate you on your achievement in meeting the stringent requirements of Nadcap accreditation. If you have any questions concerning the Nadcap Process, please contact PRI Headquarters at +1 (724) Sincerely, /LZ Enclosures: Certificate(s) Logo Sheet Use of the Mark of Conformity (s-frm-48) Lisa Zajacs Heat Treating CSR Nadcap Business Unit Americas t-frm-53p Asia Europe Jan-10 P110190

2 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Heat Treating This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing) Certified since: 09 May 1995 Joseph G. Pinto, Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA

3 Page 1 of 2 Administered by PRI SCOPE OF ACCREDITATION Heat Treating This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7102 Rev E - Nadcap Audit Criteria for Heat Treating Aluminum Alloys AC7102/2 must also be selected Beryllium/Copper Customer Specs Beryllium/Copper Industry Specs Carburizing AC7102/3 must also be selected Nickel and Cobalt Alloys Customer Specs Nickel and Cobalt Alloys Industry Specs Stainless Steels Customer Specs Stainless Steels Industry Specs Stainless Steels, Martensitic Customer Specs Stainless Steels, Martensitic Industry Specs Martensitic Stainless Steels, Precipitation Hardening Customer Specs Stainless Steels, Precipitation Hardening Industry Specs Steels Customer Specs Steels Industry Specs Titanium Alloys Customer Spec Titanium Alloys Industry Specs Vacuum Heat Treating Customer Specs Vacuum Heat Treating Industry Specs Americas Asia Europe P110190

4 Page 2 of 2 SCOPE OF ACCREDITATION Heat Treating AC7102S Rev B - Nadcap Supplemental Audit Criteria for Heat Treating U10 - GE Aviation U11 - The Boeing Company U13 - Bombardier, Inc. AC7102/2 Rev B - Nadcap Audit Criteria for Aluminum Heat Treating Aluminum Alloys - Customer Specs Aluminum Alloys - Industry Specs AC7102/3 Rev A - Nadcap Audit Criteria for Carburizing Carbonitriding Customer Specs (to be used on or AFTER 31-Jan-2010) Carbonitriding Industry Specs (to be used on or AFTER 31-Jan-2010) Carburizing - Industry Specs (to be used on or AFTER 31-Jan-2010) Carburizing- Customer Specs AC7102/5 - Nadcap Audit Criteria for Hardness Testing for Heat Treating (M1)Brinell Hardness (M2)Rockwell Hardness AC7101/4 Rev C - Nadcap Audit Criteria for Materials Testing Laboratories - Metallography and Microhardness (L)Metallography (General) (L5)Near Surface Examinations - Microhardness (L6)Near Surface Examinations - Diffusion Coatings (L7)Near Surface Examinations - IGA/IGO

5 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Aerospace Quality System (AC7004) This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing) Certified since: 14 December 2001 Joseph G. Pinto, Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA

6 Page 1 of 1 Administered by PRI SCOPE OF COMPLIANCE Aerospace Quality Systems This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC Rev D Nadcap Audit Criteria for Inspection and Test Quality System Americas Asia Europe P110190

7 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Heat Treating This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing) Certified since: 09 May 1995 Joseph G. Pinto, Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA

8

9

10