Alloyweld Inspection Co. Inc. Aerospace Quality System (AC7004)
|
|
- Patrick Wiggins
- 5 years ago
- Views:
Transcription
1 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Aerospace Quality System (AC7004) Certificate Number: Expiration Date: 31 October 2017 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
2 SCOPE OF COMPLIANCE Aerospace Quality Systems This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7004 Rev E - Nadcap Audit Criteria for Quality Management System t-frm-17 (17-Jun-10)
3 This certificate is granted and awarded by the authority of the Nadcap Management Council to: United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: NonDestructive Testing Certificate Number: Expiration Date: 31 October 2016 Joseph G. Pinto Executive Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
4 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: NonDestructive Testing Certificate Number: Expiration Date: 31 October 2016 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
5 SCOPE OF ACCREDITATION NonDestructive Testing This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev G - Nadcap Audit Criteria for NonDestructive Testing (NDT) Suppliers Accreditation (to be used on audits before 25 January 2015) AC7114S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing (NDT) Suppliers Accreditation Program S U1 Honeywell S U11 The Boeing Company S U17 Sikorsky S U21 Eaton AC7114/1 Rev G - Nadcap Audit Criteria for NonDestructive Testing Facility Penetrant Survey (to be used on audits before 25 January 2015) AC7114/1S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing Facility Penetrant Survey S U1 Honeywell S U17 Sikorsky S U21 Eaton AC7114/2 Rev G - Nadcap Audit Criteria for NonDestructive Testing Magnetic Particle Survey (to be used on audits before 25 January 2015) AC7114/2S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing Magnetic Particle Survey S U1 Honeywell S U17 Sikorsky t-frm-17 (17-Jun-10)
6 AC7114/3 Rev H - Nadcap Audit Criteria for NonDestructive Testing Facility Ultrasonic Survey (to be used on audits before 25 January 2015) AC7114/3S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing Facility Ultrasonic Survey S U11 The Boeing Company AC7114/4 Rev G - Nadcap Audit Criteria for NonDestructive Testing Facility Film Radiography Survey (to be used on audits before 25 January 2015) AC7114/4S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing Facility Film Radiography Survey S U1 Honeywell t-frm-17 (17-Jun-10)
7 August 04, 2015 Jennifer Anaya Dear Jennifer Anaya The report of the Nadcap accreditation audit of your facility on July 20 - July 22, 2015 has been approved for Nadcap accreditation. Nadcap accreditation entitles your organization to appear on the Qualified Manufacturers List (QML). Accordingly, we have enclosed your certificate(s) of accreditation/compliance, scope of accreditation and a logo sheet with a description on the uses of the PRI Mark of Conformity. Customers may be directed to the Online QML at for relevant accreditation dates and information. **Note that if any changes occur within your company (i.e., ownership, key managerial staff, equipment, company name, quality manager, address, etc.) that may affect your capability or scope of accredited activities, you are required to notify PRI Staff immediately by completing the t-frm-11: "Notification of Change / Request for Revised Certification" form located in eauditnet.com/resources/documents/procedures and Forms/Nadcap Controlled Forms/tforms. We would like to congratulate you on your achievement in meeting the stringent requirements of Nadcap accreditation. If you have any questions concerning the Nadcap Process, please contact PRI Headquarters at +1 (724) Sincerely, /CR Enclosures: Certificate(s) Scope of Accrediation Logo Sheet Use of the Mark of Conformity (s-frm-48) CATHY RUSH ASSOCIATE CSR Nadcap Business Unit
8 This certificate is granted and awarded by the authority of the Nadcap Management Council to: United States This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Welding Certificate Number: Expiration Date: 31 October 2016 Joseph G. Pinto Executive Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
9 SCOPE OF ACCREDITATION Welding This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7110 Rev E - Nadcap Audit Criteria for Welding/Brazing AC7110/1 Rev G - Nadcap Audit Criteria for Brazing (Torch/Induction) Supplement A Torch (Additional requirements) Supplement E GTA Tack Welding (Additional requirements) Supplement F Stress Relieve (Additional requirements) Supplement G Processes using gas (Additional requirements) Supplement H Processes using Flux (Additional requirements) AC7110/5 Rev H - Nadcap Audit Criteria for Fusion Welding Supplement E Foundry in process completion / repair welding of castings (Additional Requirements) Supplement F Filler Materials (Additional requirements) Supplement G Processes using Gas (For example GTAW, PAW) (Additional requirements) Supplement H Preheat / Interpass temperature control (Additional requirements) Supplement I Stress Relieve (Additional requirements) Supplement J Tack Welding (Additional requirements) Supplement K Metallographic Evaluation of Qualification Welds (Additional requirements) AC7110/5S Rev D - Nadcap Supplemental Audit Criteria for Fusion Welding U00 None AC7110/12 Rev E - Nadcap Audit Criteria for Welder/Welding Operator Qualification (This checklist is required if the audit includes AC7110/3, /5 or /6) Baseline (All audits) Supplement A Metallographic Evaluation of Qualification Welds (Additional requirements) AC7110/12S Rev F - Nadcap Supplemental Audit Criteria for Welder/Welding Operator Qualification (This checklist is required if the audit includes AC7110/3, /5 or /6) U00 None t-frm-17 (17-Jun-10)
STEICO Industries Inc. Welding
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: United
More informationSCOPE OF ACCREDITATION NonDestructive Testing
Administered by PRI SCOPE OF ACCREDITATION NonDestructive Testing This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at:
More informationArcadia Aerospace Industries LLC. NonDestructive Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Arcadia Aerospace Industries LLC Mooney Avenue Bldg 110 Punta Gorda, FL 33982 United States This certificate
More informationAsia
Administered by PRI July 21, 2011 Mr. Mike Hushek Quality Assurance Manager Dear Mike Hushek The report of the Nadcap accreditation audit of your facility on November 09 - November 12, 2010 has been approved
More informationFACC Operations GmbH. NonDestructive Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Fischerstrasse 9 Ried im Innkreis, A4910 This certificate demonstrates conformance and recognition of accreditation
More informationEllison Surface Technologies. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 106 Inovation Drive North Clarendon, VT 05759 United States This certificate demonstrates conformance and recognition
More informationEllison Surface Technologies - Mexico. Coatings
This certificate is granted and awarded by the authority of the Nadcap Management Council to: This certificate demonstrates conformance and recognition of accreditation for specific services, as listed
More informationFACC Operations GmbH. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Fischerstrasse 9 Ried im Innkreis, A4910 This certificate demonstrates conformance and recognition of accreditation
More informationNor-ell Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Nor-ell Inc 8251 Ashton Avenue NE Fridley, MN 55432 United States This certificate demonstrates conformance
More informationATI Flat Rolled Products Holdings LLC. Materials Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 1300 Pacific Ave Natrona Heights, PA 15065 United States This certificate demonstrates conformance and recognition
More informationNadcap Approvals How to Register
Nadcap Approvals How to Register 1. Access eauditnet at: https://www.eauditnet.com/eauditnet/ean/user/login.htm 2. Go to: New User? And hit the Register Now button Sean A Tull Supplier Quality December
More informationWelder Qualification Testing to AS/NZS for accreditation. criteria. supplementary
supplementary criteria for accreditation Welder Qualification Testing to AS/NZS 2980 supplementary criteria for accreditation Welder Qualification Testing to AS/NZS 2980 Fourth edition August 2016 supplementary
More informationUNCONTROLLED IF PRINTED
161Thorn Hill Road Warrendale, PA 15086-7527 1. Scope 2. Definitions PROGRAM DOCUMENT PD 1000 Issue Date: 19-Apr-2015 Revision Date: 26-May-2015 INDUSTRY MANAGED ACCREDITATION PROGRAM DOCUMENT Table of
More informationAccredited Testing Facility (ATF) 3 rd Year On-Site Audit Checklist
Facility Information: ATF Certificate #: Test Facility Name: Test Facility Representative: Address: City: State Zip: Phone Phone: Fax: Email: Facility Assessor: AWS Auditor: Date: Date: 3 rd Year On-Site
More informationCSA STANDARDS W47.1, W47.2 & W186 CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO. Congratulations and Welcome to the Certification Application Process
CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO CSA STANDARDS W47.1, W47.2 & W186 Congratulations and Welcome to the Certification Application Process This guide will help you as an applicant company meet
More informationENGINEERING INTEGRITY Asset Integrity & Corrosion Control Consultants
Training Schedule 2018 OUR SERVICES Asset Integrity Engineering Welding Engineering Consultancy Inspection Services API / ASME Training Welding Engineering NDT Services & Training # 4A, First Cross Street,
More informationAQMS AUDITOR APPLICATION GUIDE
AQMS OR AUTHENTICATION BODY AQMS OR APPLICATION GUIDE PROBITAS AUTHENTICATION 10 27 2015 RA 002 AAA UG AQMS Auditor Application User Guide pg. 1 of 22 TABLE OF CONTENTS 1 Introduction... 2 2 Certification
More informationENGINEERING INTEGRITY Asset Integrity & Corrosion Control Consultants
Training Schedule Jan - June, 2018 OUR SERVICES Asset Integrity Engineering Welding Engineering Consultancy Inspection Services API / ASME Training Welding Engineering NDT Services & Training # 4A, First
More informationWhat is equalified Background Purpose of equalified Benefits Participation Structure Program Documents How equalified works Activities to date Where
What is equalified Background Purpose of equalified Benefits Participation Structure Program Documents How equalified works Activities to date Where to find more information Questions 3 equalified is a
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationGUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION {A, M, PP, S, E, H, HLW, U, UM, U2, U3, PRT and T}
GUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION {A, M, PP, S, E, H, HLW, U, UM, U2, U3, PRT and T} The American Society of Mechanical Engineers Two Park Avenue
More information1. All stakeholders shall ensure conformance to 9104 series of standards and the published timeline for 91XX:2009 transition as they apply.
Purpose: Provide supplemental rules for all stakeholders to facilitate the transition to the 91xx:2009 Aerospace Quality Management Systems (AQMS) standards, including the implementation of 9104/1 and
More informationAWS-SCWI. American Welding Society Senior Certified Welding Inspector. Certification Programs for the Year 2018
BETZ ENGINEERING & TECHNOLOGY ZONE Educational & Research Division AWS-SCWI American Welding Society Senior Certified Welding Inspector Certification Programs for the Year 2018 Authorized International
More informationRe Authentication Guide
AQMS AUDITOR AUTHENTICATION BODY Re Authentication Guide This document contains guidance for completing the AQMS Auditor Re- Authentication process for individuals currently holding an AQMS Auditor Authentication
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationAPPLICATION FORM FOR CERTIFICATION BODIES Ready Mix Concrete Plant Certification Scheme (RMCPCS)
APPLICATION FORM FOR CERTIFICATION BODIES Ready Mix Concrete Plant Certification Scheme (RMCPCS) To apply for QCI Approval under Ready Mix Concrete Plant Certification Scheme (RMCPCS), please complete
More informationAmerican Welding Society
American Welding Society Senior Certified Welding Inspector Authorised International Agency: BETZ ENGINEERING & TECHNOLOGY ZONE Admin Office Door#74, Jeevan Nagar 1 st Street Adambakkam, Chennai-600088,
More informationCertification Report
Certification Report Nutanix Virtual Computing Platform v3.5.1 Issued by: Communications Security Establishment Certification Body Canadian Common Criteria Evaluation and Certification Scheme Government
More informationPressure to reduce time for new personnel to train and achieve adequate competency levels.
21 June 2018 2 Critical shortfall of qualified special process personnel is increasing difficulties with recruitment due to: Aging workforce Falling behind in relevant academic achievement Globalization
More informationAPPLICATION FORM FOR CERTIFICATION BODIES Yoga School Certification Scheme
APPLICATION FORM FOR CERTIFICATION BODIES Yoga School Certification Scheme To apply for QCI Approval under Yoga School Certification Scheme, please complete this application form and send it to QCI at
More informationPrerequisite: Review of the ISO Standard prior to attendance is strongly suggested. Bring a copy to the training class.
2 DAY ISO 9001-2008 *INCLUDES SPECIFIC ASPECTS OF ISO 9001-2015* INTERNAL AUDITOR TRAINING 8:30AM - 4:30PM 2015 Course Offering Description: This program is designed to develop internal quality management
More informationAQMS AUDITOR AUTHENTICATION BODY. Auditor Guide
AQMS AUDITOR AUTHENTICATION BODY Auditor Guide Probitas Authentication 7 22 2014 To review information regarding the application process, Ctrl + click to follow the links below: AS9100 AA & AEA Application
More informationAUDIT PROGRAM. Revision 6 Dated September 29, Management Systems Analysis, Inc. P.O. Box 136, Royersford, PA
AUDIT PROGRAM Revision 6 Dated September 29, 2010 Management Systems Analysis, Inc. P.O. Box 136, Royersford, PA 19468 610-409-0168 jhighl@aol.com Approved: 1.0 Objective 2.0 Scope 3.0 General To describe
More informationPolicy for Certification of Private Label Products Within the Cradle to Cradle Certified Certification Scheme. Version 1.0.
Policy for Certification of Private Label Products Within the Cradle to Cradle Certified Certification Scheme Version 1.0 March 2015 Copyright, Cradle to Cradle Products Innovation Institute, 2015 Cradle
More informationFederal Communication Commission (FCC) Office of Engineering and Technology (OET) Program Accreditation Procedure
PJLA offers third-party accreditation services to Conformity Assessment Bodies (i.e. Testing and/or Calibration Laboratories, Reference Material Producers, Field Sampling and Measurement Organizations
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationAQMS AUDITOR AUTHENTICATION BODY AQMS AUDITOR APPLICATION GUIDE
AQMS OR AUTHENTICATION BODY AQMS OR APPLICATION GUIDE AQMS OR APPLICATION GUIDE PROBITAS AUTHENTICATION 6 1 2014 TABLE OF CONTENTS 1 Introduction... 2 2 Certification Schemes... 3 3 Certification Grades...
More informationAuthorized Training Provider Application Process
Authorized Training Provider Application QuEST Forum Training Sub-Team 10 August 2015 This document describes the process and provides guidance to organizations that wish to become Authorized Training
More informationTraining and guidance on OASIS changes will be made available to affected stakeholders.
Purpose: Provide supplemental rules for all stakeholders to facilitate the transition to the 9100/9110/9120:2009 Aerospace Quality Management Systems (AQMS) standards, including use of the updated 9101:2009
More informationCertification Report
Certification Report EAL 2+ Evaluation of McAfee Enterprise Mobility Management 9.7 Issued by: Communications Security Establishment Canada Certification Body Canadian Common Criteria Evaluation and Certification
More informationAPPLICATION FORM FOR CERTIFICATION BODIES Voluntary Certification Scheme for Ayush Products / Provisional Approval
APPLICATION FORM FOR CERTIFICATION BODIES Voluntary Certification Scheme for Ayush Products / Provisional Approval To apply for QCI Approval under Provisional Approval of Certification Bodies for Ayush
More informationInternal Quality Assurance Report. Inspector General Department
Tim Parks, Chief Internal Audit Officer/Inspector General Sandy Bottone, Senior Internal Auditor/Accreditation Manager August 8, 2018 August 8, 2018 The Honorable Linda Doggett, Lee County Clerk of Circuit
More informationINSTITUTE OF NONDESTRUCTIVE TRAINING
PREPARATORY SEMINARS FOR ASNT LEVEL III EXAMINATION Course curriculum is specially designed & constantly updated to prepare you for the Similar exercises you will be expected to perform during the actual
More informationThe Role of Mobile Apps in NDT Management
The Role of Mobile Apps in NDT Management Dr. Ajay Pasupuleti Vice President Business and Technology Solutions Email: apasupuleti@nanoark.com Phone: 585-223-4334 6605 Pittsford Palmyra Rd., E6, Fairport,
More informationAudit Report. City & Guilds
Audit Report City & Guilds 21 February 2018 and 22 February 2018 Contents 1 Background 1 1.1 Scope 1 1.2 Audit Report and Action Plan Timescales 2 1.3 Summary of Audit Issues and Recommendations 3 1.4
More informationASNT NDT PROGRAM RENEWAL REQUIREMENTS
ASNT NDT PROGRAM RENEWAL REQUIREMENTS A. ASNT NDT/PdM Level III Certification The period of certificate validity is 60 months from date of issue, ending on the last day of the expiration month shown on
More informationProduct certification scheme requirements. Solar Photovoltaic Modules
Page 1 of 5 1. Introduction This document identifies the evaluation and assessment requirements and practices for the purposes of certification and listing of Solar Photovoltaic (PV) modules. Certification
More informationKENYA ACCREDITATION SERVICE
KENAS-POL-004 02 06/08/2018 06/09/2018 POL 1 of 5 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Authored by ASSISTANT DIRECTOR
More informationGreen Squared Certification Manual
SCS Global Services Manual Green Squared Certification Manual Environmental Certification Services Division 2000 Powell Street, Ste. 600, Emeryville, CA 94608 USA +1.510.452.8000 main +1.510.452.8001 fax
More informationCertification Report
Certification Report Issued by: Communications Security Establishment Certification Body Canadian Common Criteria Evaluation and Certification Scheme Government of Canada, Communications Security Establishment,
More informationCertification Report
Certification Report Issued by: Communications Security Establishment Canada Certification Body Canadian Common Criteria Evaluation and Certification Scheme Government of Canada, Communications Security
More informationMINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
MINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians ORION TOWNSHIP BUILDING DEPARTMENT A. FABRICATORS A.1. Fabricators: Not
More informationPolicy for Accrediting Assessment Bodies Operating within the Cradle to Cradle Certified Product Certification Scheme. Version 1.2
Policy for Accrediting Assessment Bodies Operating within the Cradle to Cradle Certified Product Certification Scheme Version 1.2 July 2015 Copyright, Cradle to Cradle Products Innovation Institute, 2015
More informationDOCUMENT NO. CSWIP-PED Requirements for the approval of NDT Personnel CERTIFICATION SCHEME FOR PERSONNEL. 2 nd Edition January 2011
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT NO. CSWIP-PED -2-01 Requirements for the approval of NDT Personnel 2 nd Edition January 2011 Issued under the authority of the Governing Board for Certification
More informationNational Certificate in Aeronautical Engineering (Aircraft Manufacture)
NZQF NQ Ref 0742 Version 4 Page 1 of 9 National Certificate in Aeronautical Engineering (Aircraft Manufacture) Level 4 Credits 120 This qualification has been reviewed. The last date to meet the requirements
More informationAccreditation process (LA-I-02)
Accreditation process (LA-I-02) Bureau of Laboratory Accreditation Department of Science Service Ministry of Science and Technology 75/7 Rama VI Road, Ratchathewi District, Bangkok 10400 Tel: 0-2201-7325,
More informationSouth African Forestry Assurance Scheme SAFAS 6:2018. Certification and Accreditation Procedures. Issue SAFAS Council SAFAS
South African Forestry Assurance Scheme SAFAS 6:2018 Issue 1 2018-05-22 SAFAS 346 Burger Street Pietermaritzburg South Africa Tel: +27 33 897 5000 1 Document name: Document number: SAFAS 6:2018 Approved
More informationIATF Transition Strategy Presenter: Cherie Reiche, IAOB
IATF 16949 Transition Strategy Presenter: Cherie Reiche, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy in April
More informationAudit Report. Mineral Products Qualifications Council (MPQC) 31 March 2014
Audit Report Mineral Products Qualifications Council (MPQC) 31 March 2014 Note Restricted or commercially sensitive information gathered during SQA Accreditation s quality assurance activities is treated
More informationCertification Report
Certification Report EAL 4+ Evaluation of JUNOS-FIPS for SRX Series version 10.4R4 Issued by: Communications Security Establishment Canada Certification Body Canadian Common Criteria Evaluation and Certification
More informationCertification Report
Certification Report Issued by: Communications Security Establishment Certification Body Canadian Common Criteria Evaluation and Certification Scheme Government of Canada, Communications Security Establishment,
More informationCertification Report
Certification Report Symantec Security Information Manager 4.8.1 Issued by: Communications Security Establishment Certification Body Canadian Common Criteria Evaluation and Certification Scheme Government
More informationDocument Type Policy Procedure Process / Workflow Guideline Checklist. Version 1.3 Implementation date 22/02/2018 Review date 4/02/2019
Version Information Document Title Policy Document Type Policy Procedure Process / Workflow Guideline Checklist Version 1.3 Implementation date 22/02/2018 Review date 4/02/2019 Policy Author / Editor Anna
More informationCertification Report
Certification Report EAL 2+ Evaluation of Verdasys Issued by: Communications Security Establishment Canada Certification Body Canadian Common Criteria Evaluation and Certification Scheme Government of
More informationFOOD SAFETY SYSTEM CERTIFICATION Part III: Requirements for Certification Process
FOOD SAFETY SYSTEM CERTIFICATION 22000 Part III: Requirements for Certification Process Version 4.1: July 2017 Part III: Requirements for Certification Process Contents 1 Purpose... 3 2 Application process...
More informationCASTI. CASTI Career Path. rev
CASTI Code and Standards Training Institute CASTI Career Path rev. 130531 Contents CAST CAREER PATH DIAGRAM CASTI CAREER PATH DESCRIPTION GETTING STARTED: ALBERTA WELDING EXAMINER 1 GETTING STARTED: CSA
More informationHazardous Locations. Product Certification Solutions
Hazardous Locations Product Certification Solutions 2 Designing and manufacturing products for hazardous locations is a complex environment to navigate, with many requirements for certification. To achieve
More informationMILITARY STANDARD NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND CERTIFICATION
NOT MEASUREMENT SENSITIVE MIL STD 410E 25 January 1991 SUPERSEDING MIL STD 410D 23 JULY l974 MILITARY STANDARD NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND CERTIFICATION AMSC N/A AREA NDTI DISTRIBUTION
More informationMinimum Qualifications for Special Inspectors, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
Minimum Qualifications for Special Inspectors, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians City of Novi Community Development Building Division 1 A. FABRICATORS A.1.
More informationInternal Quality Assurance Report. Inspector General Department
Tim Parks, Chief Internal Audit Officer/Inspector General Sandy Bottone, Senior Internal Auditor/Accreditation Manager August 30, 2017 August 30, 2017 The Honorable Linda Doggett, Lee County Clerk of Circuit
More informationCOMMON CRITERIA CERTIFICATION REPORT
COMMON CRITERIA CERTIFICATION REPORT CA Privileged Access Manager Version 2.5.5 v1.2 8 August 2016 FOREWORD This certification report is an UNCLASSIFIED publication, issued under the authority of the Chief,
More informationNDTMA 2015 Annual Conference
NDTMA 2015 Annual Conference Golden Nugget Hotel, Las Vegas, NV February 10-13, 2015 What was removed from the NAS 410 standard What was added to the NAS 410 standard What needs to be added to the employer
More informationAGRSS Compliance Package
AGRSS Compliance Package Supplement to SRP Installation Manual Version 8.0 Revised March 1, 2011 Supersedes all Previously Released Manuals March 1, 2011 Thank you for using the SRP line of automotive
More informationTRANSMITTED VIA ELECTRONIC MAIL, FACSIMILE, AND COURIER
4 January 2017 TRANSMITTED VIA ELECTRONIC MAIL, FACSIMILE, AND COURIER Stefan Hansmann (IANA #953) 18 Mai Yao Road Office 541 Building 7, Xian Zong Lin Yuan Nanjing Jiangsu 210000 China Email: stefan@domainerschoice.com
More informationBattery Program Management Document
Battery Program Management Document Revision 5.1 February 2011 CTIA Certification Program 1400 16 th Street, NW, Suite 600 Washington, DC 20036 e-mail: certification@ctia.org Telephone: 1.202.785.0081
More informationWELDER LEVEL B INDUSTRY TRAINING PROGRAM PROFILE ACCREDITED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education
WELDER LEVEL B Occupation Description means a person who has training in and is capable of welding ferrous and non-ferrous metals in all positions, on both plates and /or pipe, using SMAW, GTAW, and FCAW
More informationCertification Report
Certification Report McAfee Enterprise Security Manager with Event Receiver, Enterprise Log Manager, Advanced Correlation Engine, Application Data Monitor and Database Event Monitor 9.1 Issued by: Communications
More informationGuidelines for Certification - Elevating Work Platforms Inspectors
Guidelines for Certification - Elevating Work Platforms Inspectors DOCUMENT NO: Fourth Edition March 2015 Issued under the Authority of the Certification Board for Inspection Personnel, New Zealand (CBIP)
More informationTRANSMITTED VIA ELECTRONIC MAIL, FACSIMILE, AND COURIER
7 July 2015 TRANSMITTED VIA ELECTRONIC MAIL, FACSIMILE, AND COURIER Tian Shan Zhang (IANA #464) 717 Hai Tai Da Sha No. 229 Bei Si Huan Zhong Lu, Haidian District Beijing 100083 China Email: tianshanzhang@yahoo.com
More informationPart 5: Requirements for ABs FOOD SAFETY SYSTEM CERTIFICATION Part V: Requirements for Accreditation Bodies
Part 5: Requirements for ABs FOOD SAFETY SYSTEM CERTIFICATION 22000 Part V: Requirements for Accreditation Bodies Version 4.1: July 2017 Part V: Requirements for Accreditation Bodies Contents 1 Purpose...
More information2018 CANADIAN ELECTRICAL CODE UPDATE TRAINING PROVIDER PROGRAM Guidelines
2018 CANADIAN ELECTRICAL CODE UPDATE TRAINING PROVIDER PROGRAM Guidelines Under this program, CSA Group has developed a training program that provides detailed instruction on all changes of the CE Code
More informationSCS FSC Chain-of-Custody Guidance for Certification of Multiple Sites FSC-STD V2-1
2000 Powell Street, Ste. 600 Emeryville, CA 94608 USA +1.510.452.8000 main +1.510.452.8001 fax www.scsglobalservices.com SCS FSC Chain-of-Custody Guidance for Certification of Multiple Sites FSC-STD-40-003
More informationCOMMON CRITERIA CERTIFICATION REPORT
COMMON CRITERIA CERTIFICATION REPORT Dell EMC Unity OE 4.2 383-4-421 22 September 2017 Version 1.0 Government of Canada. This document is the property of the Government of Canada. It shall not be altered,
More informationThe Open Group Certification for People. Training Course Accreditation Requirements
The Open Group Certification for People Training Course Accreditation Requirements Version 1.1 February 2014 Copyright 2013-2014, The Open Group All rights reserved. No part of this publication may be
More informationRegulation update Monitoring and Compliance
Regulation update Monitoring and Compliance 2016 Statement of Compliance Evidence required for Conditions: A6 Risk management A7, B3 Event management and notification A1.3 Activity in Wales I3.1 Certificate
More informationProgram Guidelines for Security Fenestration Rating and Certification Program Administered by Architectural Testing
Program Guidelines for Security Fenestration Rating and Certification Program Administered by Architectural Testing TABLE OF CONTENTS 1.0 FORWARD...2 2.0 GENERAL...2 3.0 REFERENCED DOCUMENTS...4 4.0 DEFINITION
More informationISO Certification For Laboratory Accreditation. Dr Amadou TALL Consultation
ISO 17025 Certification For Laboratory Accreditation Dr Amadou TALL Consultation ISO 17025 Certification ISO/IEC 17025 Global quality standard for testing and calibration laboratories. It is the basis
More informationDescription of the Certification procedure FSSC 22000
Description of the Certification procedure FSSC 22000 Certific ation Table of contents 1 CERTIFICATION PROCEDURE... 2 1.1 Audit Preparation... 2 1.2 Audit Stage 1... 2 1.3 Audit Stage 2 Certification Audit...
More informationNATIONAL CERTIFICATE in Gunsmithing (Master) (Level 5)
NZQF NQ Ref 0347 Version 3 Page 1 of 10 NATIONAL CERTIFICATE in Gunsmithing (Master) (Level 5) Level 5 Credits 85 This qualification has been reviewed. The last date to meet the requirements is 31 December
More informationEOQ methods and criteria for approval of training courses and training providers
1. Scope This document is describing EOQ rules and criteria to be used for the approval of training providers and training courses using as reference the EOQ Competence Specifications (CoS) and by Accreditation
More informationACCREDITATION OF VR REPAIR ORGANIZATIONS
ACCREDITATION OF VR REPAIR ORGANIZATIONS The National Board of Boiler and Pressure Vessel Inspectors 1055 Crupper Avenue Columbus, Ohio 43229 614.888.8320 NB-514, Revision 1 Approved by BOT: August 3,
More informationNRMCA Sustainable Concrete Plant Certification Policies and Procedures
NRMCA Sustainable Concrete Plant Certification Policies and Procedures February 2011 1 Introduction 1.1 As interest in sustainable development grows, the ready mixed concrete industry must be able to support
More informationLL-C (Certification) Services Overview
LL-C (Certification) Services Overview Who is LL-C (Certification)? LL-C (Certification) is an international certification body operating in more than 40 countries with experience in the field. Provides
More informationBUSCHE PLANTS 2/3/ EAST STATE ROAD 8 ALBION, IN 46701
BUSCHE PLANTS 2/3/5 1563 EAST STATE ROAD 8 ALBION, IN 46701 with a scope of: MANUFACTURE OF MACHINED COMPONENTS AND ASSEMBLY American Systems Registrar issues this certificate and applicable appendices
More informationCertification. Causes of Reduction of Scope of Certification
Certification Granting Maintaining Suspension Reduction of Scope Withdrawal Changes & Modification of Certification Causes of Reduction of Scope of Certification Issue of changed certificate Assessment
More informationCOMMON CRITERIA CERTIFICATION REPORT
COMMON CRITERIA CERTIFICATION REPORT EMC VPLEX v5.5 Version 1.0 11 May 2016 FOREWORD This certification report is an UNCLASSIFIED publication, issued under the authority of the Chief, Communications Security
More informationMicrogeneration Certification Scheme: MCS 005
Microgeneration Certification Scheme: MCS 005 Product Certification Scheme Requirements: Solar Photovoltaic Modules Issue 2.5 This Microgeneration Installation Standard is the property of Department of
More informationJuniper Networks EX3200 and EX4200 Switches running JUNOS 9.3R2
122-B ASSURANCE MAINTENANCE REPORT MR1 (supplementing Certification Report No. CRP248) Juniper Networks EX3200 and EX4200 Switches running JUNOS 9.3R2 Version 9.3R2 Issue 1.0 February 2009 Crown Copyright
More informationIIW Guideline INTERNATIONAL WELDING INSPECTION PERSONNEL
IIW Guideline INTERNATIONAL WELDING INSPECTION PERSONNEL Minimum Requirements for the Education, Examination and Qualification IAB-041r4-16/SV-00 Copyright European Federation for Welding, Joining and
More informationS. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7
Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:
More information