POSTGRADUATE CERTIFICATE IN LEARNING & TEACHING - REGULATIONS

Size: px
Start display at page:

Download "POSTGRADUATE CERTIFICATE IN LEARNING & TEACHING - REGULATIONS"

Transcription

1 POSTGRADUATE CERTIFICATE IN LEARNING & TEACHING - REGULATIONS 1. The Postgraduate Certificate in Learning and Teaching (CILT) henceforth the Course - comprises two modules: an Introductory Certificate and a Full Certificate. 2. Candidates seeking registration for the Introductory Certificate will normally be staff of the School with little or no experience in higher education teaching. Candidates seeking registration for the Full Certificate will normally be staff of the School who have successfully completed the Introductory Certificate or who have been exempted from this requirement as outlined in either Regulations 3 or Candidates may exceptionally seek dual registration on the Introductory and Full Certificates. Candidates may be admitted to dual registration at the discretion of the Course Organiser, if i. They have work-based learning opportunities which are of strong relevance to the learning outcomes of the Full Certificate; or ii. They have submitted all of the assessed work for the Introductory Certificate as outlined in Regulation 6 and are awaiting the final assessment outcome. In the event of dual registration, the Board of Examiners will consider the candidate for the Full Certificate only following confirmation of successful completion of the Introductory Certificate (this may occur at one or more meetings of the Board). 4. Candidates for either certificate will normally complete it in eighteen months. Extensions of this time limit may be granted with the agreement of the Course Organiser. Internal candidates should also have the support of their Head of Department. External candidates should have the support of their home institution. 5. Candidates for either Certificate who are not current School staff may be admitted at the discretion of the Course Organiser. 6. The Introductory Certificate will be awarded to candidates who, to the satisfaction of the Board of Examiners, have participated in the compulsory workshops as detailed in the Course Handbook, completed a task-focused portfolio and undertaken three teaching observations, of which one is summatively assessed. Exemptions from participating in some workshops may be granted as detailed in Regulation The Full Certificate will be awarded to candidates who have, to the satisfaction of the Board of Examiners, participated in the compulsory workshops as detailed in the Course Handbook, completed a task-focused portfolio and undertaken a summative teaching observation. Exemptions from participating in some workshops may be granted as detailed in Regulation Candidates for either certificate who have previously attended any of the required workshops within two years of the date they started the course are exempted from retaking them. Candidates who undertook workshops more than two years before commencement of the course, or who took similar workshops outside the School, may be exempted from their retake with the permission of the Course Organiser. 9. Candidates may be allowed direct entry to the Full Certificate without having previously taken and passed the Introductory Certificate. Such candidates will attend a Professional Discussion with the Course Organiser (or their nominee) and one other member of the Programme team. The Professional Discussion will consider the candidate s CV and decide that the candidate: i. May progress directly to the Full Certificate without taking the Introductory Certificate,

2 ii. May progress directly to the Full Certificate but with the requirement to complete specified elements of the Introductory Certificate (workshops and/or assessment elements) concurrently, or iii. Should undertake the Introductory Certificate in full, or with some workshop exemptions as set out in Regulation No appeal is permitted against the outcome of the Professional Discussion. 11. Assessment of each certificate shall be by a Board of Examiners, appointed by the Senate, comprising a chair, up to three other teachers on the Course, an external examiner, a senior member of staff nominated by the Dean of Studies, and the Course Organiser (or their nominee). 12. The assessment scheme includes yes/no criteria in relation to, for example, whether the candidate has attended all of the required workshops. If the assessment response is no in relation to any of the yes/no criteria, the work will be returned to the candidate once for correction and resubmission. If after the work is returned to the candidate it is re-submitted and a further no response arises is relation to any of the yes/no criteria, then an un-compensatable fail has occurred. In exceptional circumstances, however, the Course Organiser has discretion to allow one further submission. 13. With regard to the summative teaching observations, up to 3 opportunities to repeat the observation are allowed if a pass assessment is not achieved on the first occasion. It will be the candidate s responsibility to ensure they have achieved a pass assessment for their summative teaching observation prior to submitting their finalised portfolio which is the last stage in the assessment process. 14. In the event of an overall fail on the graded assessments, after the compensations included within the assessment scheme, one opportunity is allowed for the candidate to review and resubmit only those elements that were graded D or E. A pass is the maximum award that can be achieved following a resubmission. 15. To achieve a distinction award for the Introductory Certificate candidates will need to: a. Meet all of the yes/no criteria and gain a pass in the summative teaching observation, and b. Pass all of the graded assessment tasks ( C or above), and c. Achieve an A or B+ grade in four of the assessment tasks including Task 6 (Reflective Commentary 1). 16. To achieve a distinction award for the Full Certificate the candidate s performance across both modules will need to: a. Meet all of the yes/no criteria and gain a pass in the summative teaching observations, and b. Pass all of the graded assessment tasks ( C or above), and either c. Achieve an A or B+ grade in eight of the assessment tasks including Task 8 (Teaching Design and Innovation) and Task 11 (Reflective Commentary 2), or d. For candidates granted direct entry under Regulation 9, achieve an A or B+ grade in four of the assessment tasks including Task 8 (Teaching Design and Innovation) and Task 11 (Reflective Commentary 2). Page 2 of 8

3 POSTGRADUATE CERTIFICATE IN LEARNING & TEACHING MARKING SCHEME Assessment Scheme and Criteria (These details are included in full in the Course Handbook) Assessment scheme for all assessed elements, and assessment criteria for Portfolio Assessment Tasks A successful assessment for each of Module 1 and Module 2 of the LSHTM Postgraduate Certificate in Learning and Teaching will require the following:- 1. Full workshop attendance YES/NO (Or agreed recognition in advance by the Course Director of prior development in the area covered by a workshop(s)) 2. One teaching observation by a programme assessor (refer to the specific assessment criteria for this included in Appendix 1) PASS/NOT ACCEPTABLE Note: Up to 3 opportunities to repeat the summative observation are possible. Feedback will be provided and areas for improvement clearly identified; Competency demonstrated in a teaching/learning session observed by a programme assessor is regarded as a threshold standard for completing the Module and therefore a pass must be achieved for successful completion of the Module. This aspect of the Programme cannot be compensated for by marks or achievements in other areas; Whilst only one assessor observation is required for each of Modules 1 and 2, further peer observations of teaching are encouraged throughout the programme, and evidence of these could be included in the Portfolios; Module 1 requires evidence of at least three teaching observations, including the observation by a programme assessor, and Assessment Task 4 requires a reflective commentary on one of these. 3. PORTFOLIO Introductory elements included YES/NO Note Module 2 can be the same as those included in the Module 1 portfolio or updated versions of them A timetable of teaching for the assessment period (from commencement of the Module to submission of the Portfolio) is included showing at least 60 to 90 hours invested in teaching and supporting student learning overall (can include planning and preparation) of which a minimum of 8 to 12 hours is teaching contact time YES/NO 4. ASSESSMENT TASKS Marking of assessed work (Module 1: Tasks 1 to 6, and Module 2: Tasks 7 to 11) will be done using the following scheme which is based on LSHTM s Masters assessment scheme: 5 (outstanding achievement) 4 (very good pass) 3 (good pass) 2 (satisfactory pass) 1 (borderline fail) 0 (outright fail OR not submitted). A more detailed narrative description of each of the marks as applied to this programme is given below. Page 3 of 8

4 Assessment Tasks 1 to 5 and 7, 9 and 10 For Portfolio Assessment Tasks 1 to 5 and 7, 9 and 10, a 2 or above is a pass for each individual task. However, with reference to each Module: Module 1: A 1 mark assessment can be gained in two of the tasks and, provided all other marks are 2 or above, an overall pass will be awarded. If more than two tasks are marked 1 or below, then an un-compensatable fail has occurred; A 0 mark can be gained in one of the tasks and, provided all other marks are 2 or above, an overall pass will be awarded. If more than one task is marked 0, or a 1 and a 0 assessment are gained, then an un-compensatable fail has occurred. Module 2: A 1 or 0 mark assessment can be gained in one of the tasks and, provided all other marks are 2 or above, an overall pass will be awarded. If more than one task is marked 1 or below, then an un-compensatable fail has occurred (note, Task 8 is excluded from this); Assessment Tasks 6, 8 and 11 For Portfolio Assessment Tasks 6 and 11 (Reflective Commentaries 1 and 2) and Task 8 (Teaching Design and Innovation), a 2 or above is a pass for this task and this must be achieved. If the mark is less than 2, then an un-compensatable fail has occurred. 5. ASSESSMENT CRITERIA FOR ALL PORTFOLIO ASSESSMENT TASKS The following assessment criteria will be applied. It is important to note that there is flexibility within the criteria to enable focus to be given appropriately to assessing Tasks of varied types, from those that arise from practical activities (e.g. evidencing a process) to those that focus on educational literature (e.g. linking theory to own practice): 5 Outstanding Achievement 4 Very Good Pass Content As appropriate to the nature of the Task, the work includes - A comprehensive discussion of all the major points A wide range of very well selected information and examples A high level of reflection, relevant to the task A process very well illustrated, described and evidenced with several levels of detail An appropriately extensive range of references to educational literature, research, informed opinion As appropriate to the nature of the Task, the work demonstrates - An outstanding grasp of issues combined with rigorous independent thinking and insights A reflective approach that clearly identifies learning and further development Sophisticated critical and creative evaluation of ideas and processes A fluent and imaginative ability to produce tailored resources and/or problem solve An excellent understanding of theory as related and applied to own practice The work is - Extremely well organised and structured Written with exceptional clarity, fluency and strength of argument Centred around reflection on own and others practice Sharply focussed on the issues Accurately and appropriately referenced Content As appropriate to the nature of the Task, the work includes - A very good discussion of the major points A wide range of relevant information and examples A high level of reflection, relevant to the task A process well illustrated, described and evidenced with several levels of detail Page 4 of 8

5 3 Good Pass 2 Satisfactory Pass A broad range of references to educational literature, research, informed opinion As appropriate to the nature of the Task, the work demonstrates - A very good grasp of issues combined with strong independent thinking A reflective approach that clearly identifies learning and further development Strong critical and creative evaluation of ideas and processes A fluent ability to produce tailored resources and/or problem solve A very good, thorough understanding of theory as related and applied to own practice The work is - Very well organised and structured Written with great clarity, fluency and strength of argument Reflective of own and others practice Very well focussed on the issues Accurately and appropriately referenced Content As appropriate to the nature of the Task, the work includes - A good discussion of most of the major points Sufficient relevant information and examples A good level of reflection, relevant to the task A process well described and evidenced A range of references to educational literature, research, informed opinion As appropriate to the nature of the Task, the work demonstrates - A good grasp of issues A reflective approach that clearly identifies learning and further development Sound critical evaluation of ideas and processes An ability to produce tailored resources and/or problem solve A good understanding of theory as related to own practice The work is - Well organised and structured Clearly and logically written Reflective of own and others practice Well focussed on the issues Accurately and appropriately referenced Content As appropriate to the nature of the Task, the work includes - Satisfactory discussion of the topic Sufficient relevant information and examples A good level of reflection, relevant to the task A process logically described and evidenced Basic references to educational literature, research, informed opinion As appropriate to the nature of the Task, the work demonstrates - Satisfactory grasp of issues A reflective approach that identifies learning and further development Basic critical evaluation of ideas and processes An ability to produce tailored resources and/or problem solve An understanding of theory as related to own practice The work is - Organised and structured Clearly and logically written Reflective of own and others practice Reasonably focussed on the issues Accurately and appropriately referenced Page 5 of 8

6 1 Borderline Fail 0 Outright Fail OR Not Submitted Content As appropriate to the nature of the Task, the work shows - Inadequate or confusing discussion of the topic Some but not sufficient relevant information and examples and/or the use of irrelevant points Little reflection, or that which is irrelevant to task A process that is not well enough described or evidenced Unfocussed or inaccurate references to educational literature, research, informed opinion Content As appropriate to the nature of the Task, the work demonstrates - Lack of understanding of the main issues Insufficient reflection on learning and future development Insufficient critical evaluation of ideas and processes Difficulties in producing appropriate resources and/or problem solving A lack of familiarity with key theories The work is - Poorly organised and structured in places Lacking in clarity in some key areas Lacking meaningful reflection on own or others practice Lacking focus on key issues Inaccurately or inappropriately referenced None of the major points or requirements of the task present Many irrelevant points included Includes no or irrelevant reflection Process, materials or problem solving not evidenced A serious lack of understanding demonstrated Inadequate grasp of issues No reflection or insight into learning and future development Unacceptable of work no reasonable level of organisation, reflection, referencing, clarity, focus or structure 6. ACHIEVING A DISTINCTION A distinction can be achieved for both the Introductory and the Full Certificate (Modules 1 and 2). This is awarded by reference to the marked work only and is calculated as follows:- To achieve a distinction award for Module 1 (Introductory Certificate) candidates will need to: a. Meet all of the yes/no criteria and gain a pass in the summative teaching observation, and b. Pass all of the marked assessment tasks ( 2 or above), and c. Achieve a 5 or 4 mark in four of the assessment tasks including Task 6 (Reflective Commentary 1). To achieve a distinction award for Module 2 (Full Certificate) the candidate s performance across both modules will need to: a. Meet all of the yes/no criteria and gain a pass in the summative teaching observations, and b. Pass all of the marked assessment tasks ( 2 or above), and either c. Achieve a 5 or 4 mark in eight of the assessment tasks including Task 8 (Teaching Design and Innovation) and Task 11 (Reflective Commentary 2), or d. For candidates granted direct entry to Module 2 through the accreditation of prior experience and learning, achieve a 5 or 4 mark in four of the assessment tasks including Task 8 (Teaching Design and Innovation) and Task 11 (Reflective Commentary 2). 7. NOTE ON THE YES/NO ASPECTS OF THE ASSESSMENT SCHEME If the assessment response is NO in relation to any of the above YES/NO criteria, the work will be returned to the candidate once for correction and resubmission. The point at which all of the above are considered is upon submission of the Module Portfolio. So, for example, it is the candidate s responsibility to ensure they have attended all of the Module workshops in full before submitting their portfolio (guidance will be provided by the candidate s Educational Supervisor on readiness for submission). Page 6 of 8

7 If after the work is returned to the candidate it is re-submitted and a further NO response arises is relation to any of the criteria, then an un-compensatable fail has occurred. In exceptional circumstances, however, the Course Director has discretion to allow one further submission. Note, the Assessment Tasks will not be marked until all of the YES/NO criteria are confirmed as YES and the assessor observation confirmed as PASS. As an exception to the above, if a candidate has been unable to attend one of the required workshops it is possible at the discretion of the chair of the Board of Examiners for them to nevertheless submit their task-focussed portfolio for assessment prior to the time limit for completion. The candidate must apply for this arrangement through the Course Director stating clearly why they have been unable to attend the workshop in question and providing a clear plan of when they will attend it. If agreed the portfolio will be assessed but the result withheld until attendance on the workshop is confirmed by the Course Director. All of the other requirements regarding submission of the finalised portfolio will still apply. A formal extension of the time limit for completion will not normally be required in these circumstances. 8. SUMMATIVE TEACHING OBSERVATIONS With regard to the summative teaching observations, up to 3 opportunities to repeat the observation are allowed if a pass assessment is not achieved on the first occasion. Feedback will be provided and areas for improvement clearly identified on each occasion. It will be the candidate s responsibility to ensure they have achieved a pass assessment for the summative teaching observation prior to submitting their finalised portfolio which is the last stage in the assessment process. 9. FINAL ASSESSMENT RESULT If all of the YES/NO criteria have been successfully assessed with a YES and the assessor teaching observation with a PASS, then the assessed Tasks will be marked to determine an overall distinction, pass or fail award for the Module in accordance with the scheme outlined above. The notes regarding uncompensatable fails, and the circumstances in which they arise, must also be noted. The Marking and Assessment Sheets corresponding to this assessment scheme, to be used by programme assessors are shown in Appendix RESUBMISSIONS In the event of an overall fail on the marked assessments, after the compensations included within the assessment scheme, one opportunity is allowed for the candidate to review and resubmit only those elements that were marked 1 or 0. A pass is the maximum award that can be achieved following a resubmission. 11. STUDENT APPEALS AND COMPLAINTS PROCEDURE The School has in place an appeals and complaints procedure the broad terms of which will apply to this Certificate programme with appropriate modifications. The procedure can be found at: FORMATIVE ASSESSMENT There will be opportunities throughout the course for students to undergo formative assessment for evaluation of their progress. A. Taught Components Participants will be encouraged to practice teaching skills in workshops (e.g. micro teaching sessions) and will receive informal feedback about these. B. Delivery of Teaching and Supporting Learning Peer review will be used not only to assess teaching summatively but also can be used for formative assessment (evidence of this is a requirement for Module 1 Assessment Task 4). C. Educational Supervisor On the commencement of the programme (or shortly thereafter) you will be allocated an Educational Supervisor to support you on a one-to-one basis. Your Educational Supervisor will provide support and feedback during the creation of learning resources and as critical and reflective writing is being produced. Page 7 of 8

8 Participants must show their first piece of Critical and Reflective Writing to their Educational Supervisor for discussion, and should aim to show their Portfolio to them at various stages throughout the course of the Module for feedback and discussion on progress. D. Progress Timetable Each cohort will be given an outline timetable suggesting a pattern of progress that would enable them to firstly spread the load in terms of the work involved and secondly complete the assessment tasks in stages and stay on track for completion of the Module overall. These stages may be seen as logical points to seek some feedback on draft work. 13. ACCREDITATION OF PRIOR EXPERIENCE AND LEARNING (APEL) Candidates for either Module (Introductory or Full Certificate) who have previously attended any of the required workshops within two years of the date they commence the Module are exempted from retaking them, unless they wish to. Candidates who undertook workshops more than two years before commencement of the Module, or who took similar workshops outside the School, may be exempted from their retake with the permission of the Course Director. Candidates may be allowed direct entry to the Full Certificate (Module 2) without having previously taken and passed the Introductory Certificate (Module 1). Such candidates will be required to attend a Professional Discussion with the Course Director (or their nominee) and one or two other members of the Programme team. The Professional Discussion will consider the candidate s CV, prior experience and development in learning and teaching, and decide that the candidate: 1. may progress directly to the Full Certificate without taking the Introductory Certificate, 2. may progress directly to the Full Certificate but with the requirement to complete specified elements of the Introductory Certificate (workshops and/or assessment elements) concurrently, or 3. should undertake the Introductory Certificate in full, or with some workshop exemptions as set out above. Applications for direct entry to the Full Certificate will only be considered if made prior to the commencement of the course or, exceptionally, if made immediately after commencement. 14. DUAL REGISTRATION Candidates may exceptionally seek dual registration on the Introductory and Full Certificates. Candidates may be admitted to dual registration at the discretion of the Course Director, if i. they have workbased learning opportunities which are of strong relevance to the learning outcomes of the Full Certificate; or ii. they have submitted all of the assessed work for the Introductory Certificate as outlined above and are awaiting the final assessment outcome. In the event of dual registration, the Board of Examiners will consider the candidate for the Full Postgraduate Certificate only following confirmation of successful completion of the Introductory Certificate (this may occur at one or more meetings of the Board). Candidates granted dual registration will normally have a three-year period to complete both Certificates starting from their commencement date for the Introductory Certificate (the provisions regarding extensions of time will apply). 20/02/13 Registry Page 8 of 8

PROGRAMME SUMMARY You are required to take eight core modules in terms one and two as outlined in the module list.

PROGRAMME SUMMARY You are required to take eight core modules in terms one and two as outlined in the module list. PROGRAMME SPECIFICATION MSc Real Estate Investment KEY FACTS Programme name Real Estate Investment Award MSc School Cass Business School Department or equivalent Specialist Masters Programme Programme

More information

Form 18 Heriot-Watt University Graduate/Postgraduate Course Structure and Course Notes Template (RAY) 2009/2010

Form 18 Heriot-Watt University Graduate/Postgraduate Course Structure and Course Notes Template (RAY) 2009/2010 Form 18 Heriot-Watt University Graduate/Postgraduate Course Structure and Course Notes Template (RAY) 2009/2010 s / F2V0-ITS Information Technology (Software Engineering) 6. Course Accredited by 7. QAA

More information

Level 2 IVQ Diploma in Training Skills( )

Level 2 IVQ Diploma in Training Skills( ) Level 2 IVQ Diploma in Training Skills(1106-02) Frequently asked questions-centres www.cityandguilds.com January 2007 Version 1.0 Contents 1 About the new qualification 3 What level is the Diploma in Training

More information

POSTGRADUATE DIPLOMA IN RESEARCH METHODS

POSTGRADUATE DIPLOMA IN RESEARCH METHODS POSTGRADUATE DIPLOMA IN RESEARCH METHODS AWARD SCHEME ACADEMIC YEAR 2012-2013 1. INTRODUCTION 1.1 This Award Scheme sets out rules for making awards for the Postgraduate Diploma in Research Methods which

More information

Part 3c Regulations for D level or level 8 modules in programmes and for Professional Doctorates (and associated awards)

Part 3c Regulations for D level or level 8 modules in programmes and for Professional Doctorates (and associated awards) Part 3c Regulations for D level or level 8 modules in programmes and for Professional Doctorates (and associated awards) These regulations apply to all Professional Doctorates unless Academic Board has

More information

PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES. Programme name Professional Engineering (Civil Engineering)

PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES. Programme name Professional Engineering (Civil Engineering) PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES KEY FACTS Programme name Professional Engineering (Civil Engineering) Award MSc School School of Engineering and Mathematical Sciences Department or equivalent

More information

Guidance for Centre Internal Verification Procedures

Guidance for Centre Internal Verification Procedures THE CHARTERED INSTITUTE OF BUILDING AWARDING ORGANSATION Guidance for Centre Internal Verification Procedures CIOB Level 3 Certificate in Supervising Construction Works to Existing Buildings and Structures

More information

ITC Level 3 Award in Teaching and Assessing First Aid Qualifications G50.T. Qualification Specification Guidance for Centres

ITC Level 3 Award in Teaching and Assessing First Aid Qualifications G50.T. Qualification Specification Guidance for Centres G50.T ITC L3 Award in Teaching and Assessing First Aid Qualifications Guidance for Centres [1] ITC Level 3 Award in Teaching and Assessing First Aid Qualifications Qualification Number: 603/0886/2 G50.T

More information

Your route to becoming a Chartered IT Professional

Your route to becoming a Chartered IT Professional Introduction Regulations 1 Structure of the qualifications, pathway to membership and further study 1.1 Certificate in IT 1.2 Diploma in IT 1.2.1 Diploma Examination 1.3 Professional Graduate Diploma in

More information

Edexcel GCSE ICT. Controlled Assessment. Teacher Support Book 2012

Edexcel GCSE ICT. Controlled Assessment. Teacher Support Book 2012 Edexcel GCSE ICT Controlled Assessment Teacher Support Book 2012 Edexcel GCSE ICT Controlled Assessment Teacher Support Book Unit 2: Using Digital Tools Unit 4: Creating Digital Products Welcome to the

More information

CIBTAC LEVEL 4 DIPLOMA IN SPA AND SALON MANAGEMENT CBD11 QAN 600/3328/9. Qualification Specification

CIBTAC LEVEL 4 DIPLOMA IN SPA AND SALON MANAGEMENT CBD11 QAN 600/3328/9. Qualification Specification CIBTAC LEVEL 4 DIPLOMA IN SPA AND SALON MANAGEMENT CBD11 QAN 600/3328/9 Qualification Specification CONTENTS CONTENTS... 2 1. CIBTAC... 3 2. Introduction to CIBTAC qualifications... 3 3. Level of the CIBTAC

More information

MSc Management with Project Management. BS524 (with PDP) Postgraduate Diploma in Management. January 2016 January 2021.

MSc Management with Project Management. BS524 (with PDP) Postgraduate Diploma in Management. January 2016 January 2021. PROGRAMME APPROVAL RECORD AND CERTIFICATE (PARC) PART 1 - GENERAL INFORMATION Programme title Award title Awarding Body/Institution Teaching Institution (if different) Language of Study UCAS Code Programme

More information

Post-accreditation monitoring report: British Computer Society (BCS) September 2006 QCA/06/2926

Post-accreditation monitoring report: British Computer Society (BCS) September 2006 QCA/06/2926 Post-accreditation monitoring report: British Computer Society (BCS) September 2006 QCA/06/2926 Contents Introduction... 3 Regulating external qualifications... 3 About this report... 3 About British Computer

More information

School of Engineering and Built Environment. MSc. Information Technology (Oil & Gas) Programme Specification Document

School of Engineering and Built Environment. MSc. Information Technology (Oil & Gas) Programme Specification Document School of Engineering and Built Environment MSc. Information Technology (Oil & Gas) Programme Specification Document 20/2016 1. Programme Specification Pro-forma GENERAL INFORMATION Programme Titles: Final

More information

BS523 (with PDP) Postgraduate Diploma in Management. January 2016 January September 2017

BS523 (with PDP) Postgraduate Diploma in Management. January 2016 January September 2017 PROGRAMME APPROVAL RECORD AND CERTIFICATE (PARC) PART 1 - GENERAL INFORMATION Programme title Award title Awarding Body/Institution Teaching Institution (if different) Language of Study UCAS Code Programme

More information

PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES

PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES PROGRAMME SPECIFICATION POSTGRADUATE PROGRAMMES KEY FACTS Programme name Telecommunications and Networks Award MSc School School of Engineering and Mathematical Sciences Department or equivalent School

More information

Levels 1-3 Qualifications in Engineering (2850)

Levels 1-3 Qualifications in Engineering (2850) Levels 1-3 Qualifications in Engineering (2850) General assignment guidance www.cityandguilds.com May 2012 Version 1.1 About City & Guilds City & Guilds is the UK s leading provider of vocational qualifications,

More information

Programme Regulations

Programme Regulations Programme Regulations 2017 18 Work Experience Entry routes related to BSc in Computing and Information Systems BSc in Creative Computing (New Regulations) Important document please read This document contains

More information

Programme Specification

Programme Specification Programme Specification Awarding Body/Institution Teaching Institution Queen Mary University of London Queen Mary University of London Name of Final Award and Programme Title Certificate in Intellectual

More information

DESIGN AND TECHNOLOGY

DESIGN AND TECHNOLOGY Qualification Accredited A LEVEL NEA Marking Criteria April 2017 DESIGN AND TECHNOLOGY H404, H405 and H406 For first teaching in 2017 www.ocr.org.uk/gcsedesignandtechnology A Level Design and Technology

More information

BCS HIGHER EDUCATION QUALIFICATIONS - REGULATIONS

BCS HIGHER EDUCATION QUALIFICATIONS - REGULATIONS BCS HIGHER EDUCATION QUALIFICATIONS - REGULATIONS 1 Structure of the Examinations 1.1 Certificate in IT 1.2 Diploma in IT 1.2.1 Diploma Examination 1.3 Professional Graduate Diploma in IT 1.3.1 Professional

More information

ILM Recognition Endorsed and Development programme application form Part Two

ILM Recognition Endorsed and Development programme application form Part Two ILM Recognition Endorsed and Development programme application form Part Two Version 0317 01 tes for completion Where you see this paperclip icon: Please attach the relevant document to your application,

More information

Qualification Specification

Qualification Specification CIBTAC Level 3 Award in Healthy Eating and Wellbeing for the Complementary Therapies Client CCQ12 QAN 600/6778/0 Qualification Specification CIBTAC V1.1(QCF) 1 Contents Contents... 2 1. CIBTAC... 3 2.

More information

Instructions for the Conduct of the Examination and Coursework (ICE) Physical Education. Entry Level Certificate (ELC) 8930

Instructions for the Conduct of the Examination and Coursework (ICE) Physical Education. Entry Level Certificate (ELC) 8930 8930 Instructions for the Conduct of the Examination and Coursework (ICE) Physical Education Entry Level Certificate (ELC) 8930 Summer 2006 Please pass one copy of this booklet to the teacher responsible

More information

Guide for the IRPM Member Examination

Guide for the IRPM Member Examination Chartered Institute of Housing Guide for the IRPM Member Examination January 2013 1 Contents Contents... 2 1. IRPM Member Examination.3 2. Regulations in respect of administration of Member examinations...

More information

Form 18 Heriot-Watt University Graduate/Postgraduate Course Structure and Course Notes Template (RAY) Version 3.0 (2007/2008)

Form 18 Heriot-Watt University Graduate/Postgraduate Course Structure and Course Notes Template (RAY) Version 3.0 (2007/2008) Form 18 Heriot-Watt University Graduate/Postgraduate Course Structure and Course Notes Template (RAY) Version 3.0 (2007/2008) 1. Course Codes 3. School/Institute Mathematical & Computer Sciences (University

More information

Financial Planning Institute of Southern Africa SETTING THE STANDARD. Continuous Professional Development (Cpd) Policy

Financial Planning Institute of Southern Africa SETTING THE STANDARD. Continuous Professional Development (Cpd) Policy FPI FPI Financial Planning Institute of Southern Africa SETTING THE STANDARD Continuous Professional Development (Cpd) Policy Table of Contents Definitions 3-4 Introduction 4 Primary Responsibility 5 Mandatory

More information

Recognition of Prior Learning - Guidance for Staff

Recognition of Prior Learning - Guidance for Staff Recognition of Prior Learning - Guidance for Staff Academic Registry Version 6 May 2017 Introduction This guidance document is to assist staff with recognition for prior learning (RPL). It should be read

More information

Computer Aided Draughting and Design: Graded Unit 1

Computer Aided Draughting and Design: Graded Unit 1 Higher National Graded Unit Specification General Information for Centres This Graded Unit has been validated as part of the HNC Computer Aided Draughting and Design (CADD) award. Centres are required

More information

CIBTAC LEVEL 3 CERTIFICATE IN MEDIA MAKE-UP CMC02 QAN 603/2350/4. Qualification Specification

CIBTAC LEVEL 3 CERTIFICATE IN MEDIA MAKE-UP CMC02 QAN 603/2350/4. Qualification Specification CIBTAC LEVEL 3 CERTIFICATE IN MEDIA MAKE-UP CMC02 QAN 603/2350/4 Qualification Specification CONTENTS 1. CIBTAC... 3 2. Introduction to CIBTAC qualifications... 3 3. Level of the CIBTAC Level 3 Certificate

More information

Programme Specification

Programme Specification Programme Specification BSc Honours Forensic Computing 1. Awarding institution Middlesex University 2. Teaching institution Middlesex University 3. Programme accredited by 4. Final qualification BSc Honours

More information

DESIGN AND TECHNOLOGY

DESIGN AND TECHNOLOGY Qualification Accredited GCSE (9 1) NEA Marking Criteria April 2017 DESIGN AND TECHNOLOGY J310 For first teaching in 2017 www.ocr.org.uk/gcsedesignandtechnology GCSE Design and Technology Iterative Design

More information

Programme Regulations

Programme Regulations Programme Regulations 2018 2019 Computer Science Computer Science (Data Science) Computer Science (Machine Learning and Artificial Intelligence) Computer Science (Web and Mobile Development) Computer Science

More information

RHS Qualifications. Approved Centre Guidance Guidance on how to become an RHS Approved Centre

RHS Qualifications. Approved Centre Guidance Guidance on how to become an RHS Approved Centre RHS Qualifications Approved Centre Guidance Guidance on how to become an RHS Approved Centre Introduction Welcome to RHS Qualifications. We are a leading awarding organisation working within the Horticultural

More information

Learn from experienced trainers with exceptional communication skills.

Learn from experienced trainers with exceptional communication skills. 1. Aims Unity College offers a unique range of training options for the Certificate IV in Training and Assessment tailored to meet both individual and organisational requirements. These training options

More information

GLASGOW CALEDONIAN UNIVERSITY. Programme Specification 1. GENERAL INFORMATION

GLASGOW CALEDONIAN UNIVERSITY. Programme Specification 1. GENERAL INFORMATION GLASGOW CALEDONIAN UNIVERSITY Programme Specification. GENERAL INFORMATION. Programme Title: BSc (ons) Quantity Surveying 2. Final Award: BSc (ons) Quantity Surveying 3. Exit Awards: University Certificate

More information

Graded Unit title: Computing: Networking: Graded Unit 2

Graded Unit title: Computing: Networking: Graded Unit 2 SQA Advanced Unit specification: general information for centres This graded unit has been validated as part of the SQA Advanced Diploma in Computing: Networking. Centres are required to develop the assessment

More information

Higher National Unit Specification. General information for centres. Unit code: DH3J 34

Higher National Unit Specification. General information for centres. Unit code: DH3J 34 Higher National Unit Specification General information for centres Unit code: DH3J 34 Unit purpose: This Unit is designed to develop a broad knowledge of the concepts, principles, boundaries and scope

More information

3.1 Marking Scales & Classifications 3.2 Requirements for Progression 3.3 Eligibility for Award

3.1 Marking Scales & Classifications 3.2 Requirements for Progression 3.3 Eligibility for Award Document Title/Reference Purpose Scope Contents Definitions Marks & Standards To outline the requirements for an award. To provide, as far as reasonably practical, consistent and fair assessment processes

More information

QCTO CERT 002/15 QCTO Certification Policy Page 2 of 14

QCTO CERT 002/15 QCTO Certification Policy Page 2 of 14 1 April 2016 Policy for the certification of learner achievements for trades and occupational qualifications on the Occupational Qualifications Sub-Framework (OQSF) Document name: Policy for the certification

More information

2D Computer Animation for Visual Communication: Advanced

2D Computer Animation for Visual Communication: Advanced Higher National Unit Specification General information for centres Unit title: 2D Computer Animation for Visual Communication: Advanced Unit code: DX3D 36 Unit purpose: The Unit is designed to extend candidates

More information

Post-accreditation monitoring report: British Gymnastics (BG) April 2007 QCA/07/3121

Post-accreditation monitoring report: British Gymnastics (BG) April 2007 QCA/07/3121 Post-accreditation monitoring report: British Gymnastics (BG) April 2007 QCA/07/3121 Contents Introduction... 3 Regulating external qualifications... 3 About this report... 4 About British Gymnastics (BG)...

More information

Qualification Manual. Level 3 Diploma in NGINEERING. Fabrication and Welding. Engineering Technology. Qualification Code: 501/1131/0. Issue 2.

Qualification Manual. Level 3 Diploma in NGINEERING. Fabrication and Welding. Engineering Technology. Qualification Code: 501/1131/0. Issue 2. Qualification Manual Level 3 Diploma in Fabrication and Welding NGINEERING Engineering Technology Qualification Code: 501/1131/0 Issue 2.0 0 Engineering and Technology Contents 1.0 About EAL 2.0 Introduction

More information

Postgraduate Diploma in Property Investment

Postgraduate Diploma in Property Investment Postgraduate Diploma in Property Investment Assessment, progression and award regulations Reference: PGDip PI regs Version: 03.00 Status: Final Author: G Fogg Date: 08/10/2014 File: PGDip PI regs Page

More information

Vocational Qualifications (QCF, NVQ, NQF) ICT Professional Competence. OCR Report to Centres

Vocational Qualifications (QCF, NVQ, NQF) ICT Professional Competence. OCR Report to Centres Vocational Qualifications (QCF, NVQ, NQF) ICT Professional Competence Level 2 Diploma in ICT Professional Competence (PROCOM) 08737 Level 3 Diploma in ICT Professional Competence (PROCOM) 10262 Level 2

More information

MSc entry onwards UCL UCL. Engineering Sciences

MSc entry onwards UCL UCL. Engineering Sciences PROGRAMME SPECIFICATION Programme Specification MSc in Information Security Programme title: Final award (BSc, MA etc): (where stopping off points exist they should be detailed here and defined later in

More information

Loyola Marymount University School of Education

Loyola Marymount University School of Education Loyola Marymount University School of Education The California Teaching Performance Assessment (CalTPA) Frequently Asked Questions The information presented in this guide is meant to serve as introductory

More information

Higher National Unit specification: general information. Graded Unit title: Computing: Networking: Graded Unit 2

Higher National Unit specification: general information. Graded Unit title: Computing: Networking: Graded Unit 2 Higher National Unit specification: general information This Graded Unit has been validated as part of the HND Computing: Networking. Centres are required to develop the assessment instrument in accordance

More information

GLASGOW CALEDONIAN UNIVERSITY. Programme Specification 1. GENERAL INFORMATION 2. EDUCATIONAL AIMS OF THE PROGRAMME

GLASGOW CALEDONIAN UNIVERSITY. Programme Specification 1. GENERAL INFORMATION 2. EDUCATIONAL AIMS OF THE PROGRAMME GLASGOW CALEDONIAN UNIVERSITY Programme Specification 1. GENERAL INFORMATION 1. Programme Title: BSc (Hons) Quantity Surveying 2. Final Award: BSc (Hons) Quantity Surveying 3. Exit Awards: University Certificate

More information

BSc (Hons) Real Estate

BSc (Hons) Real Estate School of Engineering and Built Environment Department of Construction and Surveying BSc (Hons) Real Estate August 2016 GLASGOW CALEDONIAN UNIVERSITY Programme Specification (effective from the beginning

More information

UCEM Postgraduate Diploma in Facilities Management

UCEM Postgraduate Diploma in Facilities Management UCEM Postgraduate Diploma in Facilities Management Assessment, progression and award regulations Reference: DipFM regs Version: 04.00 Status: Final Author: G Fogg Date: 06/01/2016 Effective From: February

More information

National Certificate in Electrical Engineering (Electrician for Registration) (Level 4)

National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) PROGRAMME REGULATIONS Programme Schedule National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) To be read in conjunction with Unitec Generic Certificate Regulations. 1.

More information

Advance with CIMA. Applying for CIMA Accreditation of Higher Education Programmes

Advance with CIMA. Applying for CIMA Accreditation of Higher Education Programmes Advance with CIMA Applying for CIMA Accreditation of Higher Education Programmes Education Directorate April 2013 Contents Page Introduction 3 Section 1: Core principles of accreditation 4 1.1 Rationale

More information

Computer Networking CCE1030. Module Leader: Usama Arusi. Faculty of Science and Technology. Term (AY/JS/T3) AY

Computer Networking CCE1030. Module Leader: Usama Arusi. Faculty of Science and Technology. Term (AY/JS/T3) AY Faculty of Science and Technology Computer Networking Module Leader: Usama Arusi Term (AY/JS/T3) AY Duration of the module in weeks (24 weeks) Document Version 01 Department of Computer Science Computer

More information

SQA Advanced Unit specification: general information. Professionalism and Ethics in Computing

SQA Advanced Unit specification: general information. Professionalism and Ethics in Computing SQA Advanced Unit specification: general information Unit title: Professionalism and Ethics in Computing Unit code: HP29 47 Superclass: DE Publication date: August 2017 Source: Scottish Qualifications

More information

Higher National group award Graded Unit Specification

Higher National group award Graded Unit Specification Higher National group award Graded Unit Specification General Information for Centres This group award Graded Unit has been validated as part of the HNC and HND Electronics awards. Centres are required

More information

2018 CANADIAN ELECTRICAL CODE UPDATE TRAINING PROVIDER PROGRAM Guidelines

2018 CANADIAN ELECTRICAL CODE UPDATE TRAINING PROVIDER PROGRAM Guidelines 2018 CANADIAN ELECTRICAL CODE UPDATE TRAINING PROVIDER PROGRAM Guidelines Under this program, CSA Group has developed a training program that provides detailed instruction on all changes of the CE Code

More information

Higher National Unit Specification. General information for centres. Unit code: DX33 35

Higher National Unit Specification. General information for centres. Unit code: DX33 35 Higher National Unit Specification General information for centres Unit title: Digital Imaging Project Unit code: DX33 35 Unit purpose: This Unit is designed to apply digital and computer technology within

More information

ITIL Master Qualification. Candidate Process Guidance

ITIL Master Qualification. Candidate Process Guidance ITIL Master Qualification Candidate Process Guidance ITIL Master Qualification Overview ITIL Master Assessment process Registration The Proposal The Work Package The Interview General Advice for Candidates

More information

National Council for Special Education. NCSE Support Service Assistant National Coordinator Job Description and General Notes

National Council for Special Education. NCSE Support Service Assistant National Coordinator Job Description and General Notes National Council for Special Education 1. Overview: NCSE Support Service Assistant National Coordinator Job Description and General Notes On 20 th March, 2017 three support services, the Special Education

More information

Qualification Specification

Qualification Specification Qualification Specification BT5C1 VTCT (ITEC) Level 5 Certificate in Advanced Blemish Removal 603/2912/9 BT5C1 Qualification Specification_v1 Page 1 of 19 About VTCT (itec) VTCT is a UK Government-approved

More information

Approved Trainers Certification

Approved Trainers Certification Approved Trainers Certification The APM Group Limited QMS Related Documents Eligibility Requirements Training Certification Overview Application forms Training Organisation Certification Certification

More information

BTEC Centre Guide to Standards Verification

BTEC Centre Guide to Standards Verification BTEC Centre Guide to Standards Verification 2017-2018 Contents Introduction How to use this guide 1. What you need to do 2. What you need to know Standards verification 1. Allocation of your Standards

More information

Higher National Unit specification: general information. Graded Unit 2

Higher National Unit specification: general information. Graded Unit 2 Higher National Unit specification: general information This Graded Unit has been validated as part of the HND Computing: Software Development. Centres are required to develop the assessment instrument

More information

BEng (Hons) Mechanical Engineering - E440 (Under Review)

BEng (Hons) Mechanical Engineering - E440 (Under Review) BEng (Hons) Mechanical Engineering - E440 (Under Review) 1.0 Introduction Mechanical Engineering is the historical root of engineering practice. It gave its name to the realm of technology-based problem-solving,

More information

New Zealand Diploma in Engineering

New Zealand Diploma in Engineering New Zealand Diploma in Engineering (Level 6) (Version 2.0) with strands in: Civil Engineering Electrical Engineering Electronic Engineering Mechanical Engineering Wintec code: EN1603 MoE: NZ2612 Level:

More information

APM Accreditation for training providers Application Guidance Notes

APM Accreditation for training providers Application Guidance Notes APM Accreditation for training providers Application Guidance Notes APM Accreditation for training providers Guidance Notes CONTENTS Overview 2 Application process 3 Guidance on completing your application

More information

RHS QUALIFICATIONS GUIDANCE FOR CENTRES OFFERING RHS QUALIFICATIONS IN PRACTICAL HORTICULTURE

RHS QUALIFICATIONS GUIDANCE FOR CENTRES OFFERING RHS QUALIFICATIONS IN PRACTICAL HORTICULTURE RHS QUALIFICATIONS GUIDANCE FOR CENTRES OFFERING RHS QUALIFICATIONS IN PRACTICAL HORTICULTURE Verification Year Starting September 2017 1 Contents: 1.0 Introduction 3 Page 2.0 Centre approval 7 3.0 Registering

More information

Digital Communication and Aesthetics,

Digital Communication and Aesthetics, Curriculum for the Elective Study at Bachelor Level in Digital Communication and Aesthetics, 2016 Corrected 2017 Amended 2018 Department of Media, Cognition and Communication Faculty of Humanities University

More information

Curriculum for the Bachelor's Degree Programme in Web Development Institutional section

Curriculum for the Bachelor's Degree Programme in Web Development Institutional section Curriculum for the Bachelor's Degree Programme in Web Development Institutional section Curriculum for the Bachelor's Degree Programme in Web Development Institutional section Table of contents 1.... 0

More information

Level 1 Certificate in Reception Services ( )

Level 1 Certificate in Reception Services ( ) Level 1 Certificate in Reception Services (8067-01) Assessment pack www.cityandguilds.com January 2012 Version 1.01 About City & Guilds City & Guilds is the UK s leading provider of vocational qualifications,

More information

Progression from this unit could be to J0HB 34 Penetration Testing to test the effectiveness of the firewall and its configuration.

Progression from this unit could be to J0HB 34 Penetration Testing to test the effectiveness of the firewall and its configuration. Higher National Unit Specification General information Unit code: J0SA 34 Superclass: CB Publication date: June 2018 Source: Scottish Qualifications Authority Version: 01 Unit purpose The purpose of this

More information

ASSESSMENT QUERIES 3 SUBMITTING YOUR WORK IN TURNITIN 4. How do I upload my case report/work in Turnitin? 4 ACCESSING YOUR FEEDBACK 5

ASSESSMENT QUERIES 3 SUBMITTING YOUR WORK IN TURNITIN 4. How do I upload my case report/work in Turnitin? 4 ACCESSING YOUR FEEDBACK 5 FAQs Contents Who should I contact with a query about assessment? 2 Who should I contact with a technical issues or issues regarding the teaching and learning materials on the module? 2 Who should I contact

More information

National Council for Special Education. NCSE Support Service Advisor Job Description and General Notes

National Council for Special Education. NCSE Support Service Advisor Job Description and General Notes National Council for Special Education NCSE Support Service Advisor Job Description and General Notes 1. Overview: On 20 th March, 2017 three support services, the Special Education Support Service (SESS),

More information

Unit title: Computing: Website Design and Development (SCQF level 5)

Unit title: Computing: Website Design and Development (SCQF level 5) National Unit Specification General information Unit code: HW52 45 Superclass: CB Publication date: February 2018 Source: Scottish Qualifications Authority Version: 02 Unit purpose The purpose of this

More information

RG146 Compliance Solution FAQs Content Summary

RG146 Compliance Solution FAQs Content Summary RG146 Compliance Solution FAQs Content Summary General... 3 How do I become a financial planner?... 3 How do I become RG146 compliant?... 3 Do I have to be a member of CPA Australia to be eligible to enrol?...

More information

Continuing Professional Development Verification and Recognition Policy

Continuing Professional Development Verification and Recognition Policy Continuing Professional Development Verification and Recognition Policy Summary of Policy The London Institute of Banking & Finance issues Statements of Professional Standing (SPS) to financial advisers

More information

ARMA Professional Qualifications. Marie Garnett Head of Professional Development

ARMA Professional Qualifications. Marie Garnett Head of Professional Development ARMA Professional Qualifications Marie Garnett Head of Professional Development Professional Recognition ARMA has long harboured ambitions to provide UK professional recognition for members: To help raise

More information

Component Specification NFQ Level 5. Web Authoring 5N Component Details. Web Authoring. Level 5. Credit Value 15

Component Specification NFQ Level 5. Web Authoring 5N Component Details. Web Authoring. Level 5. Credit Value 15 Component Specification NFQ Level 5 Web Authoring 5N1910 1. Component Details Title Teideal as Gaeilge Award Type Code Web Authoring Ceapadóireacht Gréasáin Minor 5N1910 Level 5 Credit Value 15 Purpose

More information

Civil Engineering, Civil Engineering with Industrial Placement. School of Mathematics, Computer Science and Engineering

Civil Engineering, Civil Engineering with Industrial Placement. School of Mathematics, Computer Science and Engineering PROGRAMME SPECIFICATION KEY FACTS Programme name Award School Department or equivalent UCAS Code Programme code Type of study Total UK credits 480 Total ECTS 240 Civil Engineering, Civil Engineering with

More information

MEng Integrated Engineering

MEng Integrated Engineering MEng Integrated Engineering UCAS code: H103 Awarding Institution: The University of Reading Teaching Institution: The University of Reading Relevant QAA subject benchmarking group(s): Engineering Faculty

More information

9 March Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF)

9 March Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF) 9 March 2016 Assessment Policy for Qualifications and Part Qualifications on the Occupational Qualifications Sub-Framework (OQSF) Document name: Assessment Policy for Qualifications and Part qualifications

More information

Technical Awards FAQs. General Questions

Technical Awards FAQs. General Questions Technical Awards FAQs Technical Awards are part of a suite of Technical Qualifications for 14-19 year olds which the Department for Education (DfE) approves annually for the following categories: 1. Technical

More information

COURSE SPECIFICATION

COURSE SPECIFICATION Date of production of course specification: September 2015 Date of review of course specification: N/A Date of course approval/validation: TBC COURSE SPECIFICATION This specification provides a concise

More information

ETSETB Academic Regulations for MET and MEE Master Degree Theses (TFM - Treball Fi de Màster)

ETSETB Academic Regulations for MET and MEE Master Degree Theses (TFM - Treball Fi de Màster) ETSETB Academic Regulations for MET and MEE Master Degree Theses (TFM - Treball Fi de Màster) MÀSTER EN ENGINYERIA DE TELECOMUNICACIÓ (MET) MÀSTER EN ENGINYERIA ELECTRÒNICA (MEE) Academic regulations for

More information

CDCS Recertification Handbook 2014

CDCS Recertification Handbook 2014 Level 4 Certificate for Documentary Credit Specialists (CDCS ) 601/1159/8 CDCS Recertification Handbook 2014 CONTENTS Page 1. CDCS recertification 3 2. Overview of continuing professional development (CPD)

More information

Quality Assurance Handbook Functional Skills English Levels 1 and 2

Quality Assurance Handbook Functional Skills English Levels 1 and 2 Quality Assurance Handbook 2017-18 Functional Skills English Levels 1 and 2 1 Introduction... 4 Registrations... 4 Section1: Pearson Edexcel Centres... 4 Key issues 2017-18... 4 Communicating with us...

More information

BEng (Hons) Electronic and Communication Engineering - E431 (Under Review)

BEng (Hons) Electronic and Communication Engineering - E431 (Under Review) BEng (Hons) Electronic and Communication Engineering - E431 (Under Review) 1. Introduction The field of Electronic and Communication Engineering is one that currently evolves at an extremely fast rate.

More information

INFORMATION SYSTEMS EXAMINATIONS BOARD

INFORMATION SYSTEMS EXAMINATIONS BOARD INFORMATION SYSTEMS EXAMINATIONS BOARD Certificate in Freedom of Information Guidelines for Candidates March 2009 ISEB/Regs&Guide/AccredV1.4 03/09 TABLE OF CONTENTS FOREWORD... 2 1 INTRODUCTION... 2 1.1

More information

Provider Monitoring Report. City and Guilds

Provider Monitoring Report. City and Guilds Provider Monitoring Report City and Guilds 22 May 2017 to 3 August 2017 Contents 1 Background 1 1.1 Scope 1 1.2 Provider Monitoring Report Timeline 2 1.3 Summary of Provider Monitoring Issues and Recommendations

More information

Higher National Qualifications Internal Assessment Report 2014 Electrical Principles

Higher National Qualifications Internal Assessment Report 2014 Electrical Principles Higher National Qualifications Internal Assessment Report 2014 Electrical Principles The purpose of this report is to provide feedback to centres on verification in Higher National Qualifications in this

More information

RULES AND REGULATIONS OF THE FACULTY ITC EXAMINATION BOARD APPLICABLE FOR COURSES STARTING FROM SEPTEMBER 2016 ONWARDS

RULES AND REGULATIONS OF THE FACULTY ITC EXAMINATION BOARD APPLICABLE FOR COURSES STARTING FROM SEPTEMBER 2016 ONWARDS RULES AND REGULATIONS OF THE FACULTY ITC EXAMINATION BOARD APPLICABLE FOR COURSES STARTING FROM SEPTEMBER 2016 ONWARDS Faculty of Geo-Information Science and Earth Observation (Faculty ITC) The Examination

More information

IPC Certification Scheme IPC QMS/EMS Auditors

IPC Certification Scheme IPC QMS/EMS Auditors Page 1 of 16 International Personnel Certification Association I P C CERTIFICATION SCHEME IPC QUALITY/ENVIRONMENTAL MANAGEMENT SYSTEM AUDITORS ISSUE 1 Page 2 of 16 International Personnel Certification

More information

European Diploma in advanced critical care EchoCardiography (EDEC)

European Diploma in advanced critical care EchoCardiography (EDEC) European Diploma in advanced critical care EchoCardiography (EDEC) Information and check list for candidates The accreditation process is run as a service for intensivists practising echocardiography.

More information

BCS Higher Education Qualifications. Diploma in IT. Professional Project Syllabus

BCS Higher Education Qualifications. Diploma in IT. Professional Project Syllabus BCS Higher Education Qualifications Diploma in IT Professional Project Syllabus Version 2.0 December 2016 This is a United Kingdom government regulated qualification which is administered and approved

More information

BIIAB ICT Systems and Principles for IT Practitioners and Professionals Qualifications Handbook

BIIAB ICT Systems and Principles for IT Practitioners and Professionals Qualifications Handbook Qualification Handbook BIIAB ICT Systems and Principles for IT Practitioners and Professionals Qualifications Handbook BIIAB Level 2 Award In ICT Systems and Principles for Practitioners (QCF) 601/6468/2

More information

Bachelor of Applied Management

Bachelor of Applied Management with majors in: Accounting (non-nzica/cpa), Accounting (NZICA/CPA), Business Transformation and Change, Event Management, Food and Beverage Management, Hotel Management, Human Resource Management, Innovation

More information

OCR Level 3 Award in Administration (Business Professional) Entry code 03958

OCR Level 3 Award in Administration (Business Professional) Entry code 03958 Administration (Business Professional) Centre Handbook OCR Level 3 Award in Administration (Business Professional) Entry code 03958 OCR Level 3 Certificate in Administration (Business Professional) Entry

More information

New Zealand Diploma in Engineering (Level 6) (Version 2.0)

New Zealand Diploma in Engineering (Level 6) (Version 2.0) New Zealand Diploma in Engineering (Level 6) (Version 2.0) with strands in: Civil Electrical Electronic Mechanical Wintec code: EN1603 MoE: NZ2612 Level: 6 Credits: 240 Owner: Centre for Engineering and

More information

Find out more about APM qualifications and keep up to date with the latest developments at apm.org.uk/apmqualifications

Find out more about APM qualifications and keep up to date with the latest developments at apm.org.uk/apmqualifications APM recognises the importance of keeping qualifications up to date and relevant, so they reflect the knowledge that you have, the work that you do and the skills that you have developed. Our APM Project

More information