GLOBAL MARKET ACCESS WORLDWIDE WIRELESS, SAFETY AND EMC CERTIFICATION SERVICES FOR ELECTRICAL/ELECTRONIC PRODUCTS

Transcription

1 GLOBAL MARKET ACCE WORLDWIDE WIRELE, AFETY AND EMC CERTIFICATION ERVICE FOR ELECTRICAL/ELECTRONIC PRODUCT

2 Fast Global Market Access throu When shipping products to global markets, it is necessary to understand and abide by the requirements of each country/region. However, with radical changes in technology and system Europe changes in each country, the regulations, UL-EU Mark Asia standards and certification systems imposed changing. D Mark E CCC Mark ENEC Mark E BMI Mark at the time of market entry are also constantly At UL, our global market access services include certification services for wireless, EMC E UL-G Mark (electromagnetic compatibility) and product safety. No matter which markets you would E KC Mark AFETY Mark E EAC Mark like to enter, we can provide one-stop service E CE Marking for testing and certifications in your target countries/regions and assist you in reducing time, cost and labour for the global launch of your products. E EMC * Wireless is regulated in most countries. Global Certification Process Customer Contact UL for application and request quotes Accept quotes and request project launch Prepare and submit all documents and samples UL Issue quotation including expected turnaround time and fee Inform necessary documents and samples Prepare and submit application documents Conduct testing, if necessary Competent authority/agent Local testing laboratory 2 Conduct testing, if necessary Verify application documents

3 gh Well-proven Global Programs North America UL Mark Japan cul Mark UL-JP Mark culus Mark E PE Mark Enhanced UL Mark PC Mark E FCC Doc Mark E Mark E Central and outh America VCCI UL-MX NOM Mark Radio Law Certification Telecommunications Business Act Certification UL-BR INMETRO Mark* UL-AR Mark Oceania E RCM Mark International Enhanced UL Mark culus-eu Mark E CB Certification *To access the full scope of our Brazilian Certification please visit ul.com.br (language: Portuguese). Please use a specified INMETRO Mark on your certified product. Receive certificate Testing by local authority/agent may not be in countries that accept test reports such as; U.. FCC and Europe R&TTE, RE for wireless, Receive certificate Issue invoice Issue certificate, IEC/ EN report for safety, and, EN, CN report for EMC. The time for ob taining the certificates and gathering information differ by target countries and product categories. Application documents Documents for certification application differ by countries. However, the following documents are generally. In most cases, all the documents need to be available in English. Application form Product specification Circuit diagram Antenna specification (for wireless devices) Labelling diagram Declaration (for proxy) Block diagram Par ts list Component layout plan (internal photos) Instruction manual Product photos, etc. 3

4 Global Radio Law Certifications In order to export wireless devices, the requirements of destination market's Radio Law have to be met. only do the regulations and standards by each country's certification system differ, they are frequently subject to revision. Almost all the countries have mandatory certification systems in relation to Radio Law. In Japan, the devices classified as extremely low power radio station are not to acquire certification. However, these devices are to acquire certification in many other countries. In this situation, We have provided regulatory information and certifications of approximately 200 countries/regions, leveraging cooperative relationship we have built with global regulatory organizations. From checking the latest information on global Radio Laws and gaining knowledge on marking requirements for labels and manuals to obtaining certifications from multiple countries, we have a system in place to accurately and quickly respond to your needs. is an accredited testing organization recognized by JAB (Japan Accreditation Board for Conformity Assessment), NVLAP (America's National Voluntary Laboratory Accreditation Programme) and A2LA (American Association for Laboratory Accreditation). CertNo (Testing) Our test data are accepted in many markets including North America and Europe. NVLAP 認定範囲は Each accreditation symbol has a different scope, therefore refer to the We also provide below services to meet your specific certification needs. following web site for detailed accreditation scope. all testing is covered by each of the accreditations listed. all calibration services offered are covered by the A2LA accreditation scope.please see 's accreditation scopes at Certification under Japanese Radio Law is recognized as a Registered Certification Body under the Radio Law by the Minister of Internal Affairs and Communications. As such, we are able to provide one-stop service from testing to certification, covering Technical Regulations Conformity Certification and Attestation of the Construction Design to specified wireless equipment of unlicensed, blanket licensed and other facilities. Certification under Japanese Telecommunications Business Act is recognized as a Registered Approval Body under the Telecommunications Business Act by the Minister of Internal Affairs and Communications. We provide a complete service from testing to certification, covering Technical tandards Conformity Approval and Certification of Type in accordance with the Article 4 Item 1 (Terminal equipment for communications) and Item 2 (Other terminal equipment) of the Rules for Technical tandards Conformity Approval for terminal equipment. Conformity Assessment/Certification for R&TTE/RE Directive As we are registered as a ified Body under the R&TTE/RE Directive, the testing data we produce under the Directive are accepted by the EU member countries and we can issue a certificate of EU type examination. Thus we can help your product enter Europe through our comprehensive services including testing, TCF creation and notification to global radio regulatory agencies. North America TCB ervices UL Verification ervices and are recognized as Telecommunication Certification Body (TCB) to issue approval to telecommunication device on behalf of the U.. Federal Communications Commission (FCC). We enable you to obtain the FCC and Industry Canada(IC) certifications in a shorter period of time. eminars on Global Wireless Regulations 4 In response to our clients' requests, we conduct individual seminars relating to regulations and application procedures that differ from country to country (e.g. UA/Europe) as well as specific testing requirements. We also cover topics and important points from country specific type approval applications, based on our extended experience in the business.

5 Radio Law Certifications of Major Markets Country (Region) Certification Competent authority or tandard (Directive) Local representative Marking Requirements Local testing Turnaround time Expiry date Remarks Japan MIC (Ministry of Internal Affairs and Communications) around 1 week UA FCC (Federal Communications Commission) around 1 week Canada IED (Innovation, cience and Economic Development Canada) (necessary to register at the authorities) around 1.5 weeks (for FCB application) EU + EFTA member states elfdeclaration RE Directive (Radio Equipment Directive) TCF creation: around 1 week N.B. validation: around 1 week (Required for renewal of standards) Russia Minsvyaz (Ministry of Information Technology and Communications of the Russian Federation in Moscow) No around 10 weeks Israel MoC (Ministry of Communications) around 16 weeks audi Arabia CITC (Communications and Information Technology Commission) No around 2-4 weeks United Arab Emirates * TRA (Telecommunications Regulatory Authority) around 5 weeks * Applicants (Producers) that have not acquired the producer registration (Registration Certificate) need to do so when applying for certification. outh Africa ICAA (Independent Communications Authority of outh Africa) around weeks China RRC (tate Radio Regulatory Commission) around 6-8 weeks outh Korea KCC (Korea Communications Commission Republic of Korea) around 4-6 weeks Indonesia DPPI (Direktorat Jenderal umber Daya Dan Perangkat Pos Dan Informatika) * around 8-10 weeks *Required for wireless type approval including import licence. for cases where only wireless type approval is requested. Taiwan NCC (National Communications Commission) (RF licence ) around 6-8 weeks Australia elfdeclaration ACMA (Australian Communications and Media Authority) around 2 weeks New Zealand elfdeclaration MBIE (Ministry of Business Innovation and Employment) around 2 weeks Argentina ENACOM (Ente Nacional de Comunicaciones) (Necessary to register at the authorities) around weeks Brazil ANATEL (Agencia National de Telecomunicacoes) (Barcode licence ) around weeks Chile UBTEL (ubsecretaria de Telecomunicaciones) around 6-8 weeks The above is based on the research on global Radio Laws and actual application results to short-range wireless devices as of June The turnaround times are the periods usually taken in typical certification. Actual times will differ depending on the wireless technology used. In certain countries, it may be possible to apply for express services to shorten the turnaround time. We can make a request to a local authority upon your request. RE and FCC reports : It is possible to obtain certification, using test reports based on RE Directive or FCC. If no local representatives are available, we can introduce a local representative proxy agent in specific countries. Please contact us individually. 5

6 Global /EMC Certifications While the regulations for product safety and EMC differ in every country and region around the world, UL has a system in place to support you from specifying essential standards and requirements and conducting necessary tests and assessments to providing certifications. By making full use of UL's global network, we are able to provide the certificates and certification marks you need in a very efficient manner. We also can help you gain energy efficiency certification. Please contact us to find out more. Testing/Evaluation Construction review: By reviewing regulatory requirements, we evaluate the product construction to confirm whether the product is ready to receive conformance test. testing: Testing to IEC, EN and national standards EMC(Electromagnetic Compatibility)/EMF (Electromagnetic Field) testing Report preparation: We prepare reports and documents based on your needs, including reports for individual testing and CB certification, TCF (Technical Construction File) for CE Marking, etc. Issuance of Certificates/ Certification Marks UL is recognized in many countries as a certification body. Examples: C-UL Mark (Canada), D Mark (Denmark), DENAN PE Mark (Japan), PC Mark (Japan), Mark (Japan), UL-EU Mark (Europe), G Mark (Germany/Europe), Mark (Argentina), INMETRO Mark (Brazil), NOM Mark (Mexico), Australia/ New Zealand safety certification, Mark (ingapore), CB Certificate/report Certification upport ervice We can even help you obtain certificates and marks not listed above. We formulate a certification plan, fill out the necessary forms, coordinate sample preparation, prepare necessary documents for obtaining certification and work as liaison to relevant certification bodies, thus enabling you to obtain the certification marks and certificates you want. Examples: CCC Mark (China), KC Mark (Korea), BMI Mark (Taiwan), EAC Mark (Russia, Belarus, Kazakhstan, Armenia, Kirghiz) 6 CB Testing and Certification UL is able to issue CB test reports and CB certificates as an IECEE recognized National Certification Body(NCB) and CB Testing Laboratory(CBTL). You can use the CB certificate for not only CE marking report but also report for UL/ cul Mark, UL-G Mark, D Mark and Mark UL issues. By addressing national differences, only minimal confirmation tests are to obtain third party certification marks of CB cheme member countries such as CCC Mark. Please check 's recognition scope for CB cheme in the table on the right. NCB/CBTL Recognition NCB CBTL Category UL (U) Head office laboratory MED(Medical equipment) MEA(Measuring instruments) PV(Photovoltaic product) MIC(Others) UL (Demko) Head office laboratory BATT(Battery) LITE(Lighting apparatus) UL (JP) Head office laboratory TRON(AV equipment) OFF(IT equipment) HOU(Household and similar appliances) Head office EMC laboratory Yokowa EMC laboratory honan EMC laboratory EMC(Electromagnetic Compatibility)

7 /EMC Certifications of Major Markets Country (Region) Mandatory/ Voluntary Program/ Mark Local Marking Representative Requirements Conformity requirements Local testing Initial factory inspection Turnaround time (excluding initial factory inspection) Expiry date Remarks Japan Mandatory PE CB/EMC report Around 4 weeks UA Voluntary UL Around 4 weeks Canada Mandatory cul Around 4 weeks EU + EFTA member states Mandatory CE Optional CB/EMC report No (elf-declaration) Russia, Belarus, Kazakhstan Armenia,Kirghiz Mandatory EAC CB/EMC report Around 4 weeks Israel Mandatory II CB/EMC report No Around 6 weeks India Mandatory CR No Around 6 weeks* *Please contact us. outh Africa Mandatory NRC LoA No No Around 10 months outh Africa Mandatory AB No EMC No TBD TBD Regulation has been changed on May No CoC will be issued and local test report. China Mandatory CCC Around 8 weeks outh Korea () outh Korea (EMC) Mandatory KC Mandatory KC EMC* ingapore Mandatory pring Taiwan Mandatory BMI * (Only for Certification cheme: Type 1) Around 6 weeks EMC No Around 4 weeks CB/EMC report * No Around 3 weeks ( for some IT equipment) Around 8 weeks *Limited in s which ( for Confirmation issued by NCB who contracted cheme: Type 2) with KTC. *For wireless devices, KC EMC certification includes in radio law certification. *Only for some IT equipment. CB can be converted into CN at local accredited labs. EMI report requires Taiwan exclusive CN report, or local testing. Australia/New Zealand Mandatory UL NZ CoA No* No Around 2 weeks *May be depending on the items and certification bodies. Australia/New Zealand Mandatory RCM * EMC report No (elf-declaration + Online registration) *Based on the above UL NZ CoA elf declaration, after registering at the relevant authorities and display the RCM mark Argentina Mandatory Argentina * Around 2 weeks * if the factory have CIG 023 report that UL made within 1 year. Brazil Voluntary* INMETRO * Around 4 weeks *Mandatory only for IT equipment for government procurement. And + EMC and Energy efficiency will be in that cases. Mexico Mandatory NOM NOM report can be created by UL Japan No Around 6 weeks Mexico Mandatory UL MX CoC* Can be issued with UL approval No Around 1 week *UL MX CoC is possible for only a part of product categories. The above is based on the research on global safety/ EMC standards and actual application results for IT equipment as of January The turnaround times are the periods usually taken in typical certification. Depending on the product and factory approval status, the times may vary. We can make a request on turnaround time to a local authority upon your request. In the case local testing is, the sample transport time is not included. : It is possible to obtain certification using the CB certificate/report issued by. EMC report : It is possible to obtain certification using the EMC report issued by. If no local representatives are available, we can introduce a local representative proxy agent in specific countries. Please contact us individually. Even if there is no expiry date, you may need to update or change your certification due to changes in product or the expiration of applicable standards. 7

8 , Inc. ul.com/jp Head Office , Asama-cho, Ise-shi, Mie , Japan Ise Laboratory , Asama-cho, Ise-shi, Mie , Japan Tel: Fax: Head Office EMC Laboratory , Asama-cho, Ise-shi, Mie , Japan Tokyo Head Office Marunouchi Trust Tower Main Building 6F, Tel: Fax: , Marunouchi, Chiyoda-ku, Tokyo , Japan Global Market Access Tel: Fax: Tel: Fax: honan EMC Laboratory , Megumigaoka, Hiratsuka-shi, Kanagawa , Japan Tel: Fax: Yokowa EMC Laboratory 108, Yokowa-cho, Ise-shi, Mie , Japan Tel: Fax: Contact for Inquiries Kashima EMC Laboratory 1614, Mushihata, Katori-shi, Chiba , Japan Consumer Technology Division Tel: Fax: Automotive Technology Center , Neuramachi,Miyoshi-shi,Aichi Japan UL and the UL logo are trademarks of UL LLC Other marks are the property of their respective owners of those marks. Tel: Fax: This document is for general information purposes only and is not intended to convey legal or other professional advice. 1707N_V1.4