ENGINEERING AND TECHNICAL SCIENCES DIVISION SUPPLEMENTAL TEXTS
|
|
|
- Marcus Fitzgerald
- 6 years ago
- Views:
Transcription
1 Building Trades Department Cabinetmaking and Millwork Modern Cabinetmaking, Textbook ( ), Instructor s Manual ( ) and Workbook ( ) Carpentry Carpentry Framing and Finishing, Level Two, 4 th Edition Carpentry Fundamentals, Level One, 4 th Edition Core Curriculum, Introductory Craft Skills, 3 rd Edition Modern Carpentry, Texbook ( ) Instructor s Manual ( ), and Workbook ( ) Electrician Occupations Electrical Systems Based on the 2008 NEC (National Electrical Code) Umstattd and Davis Goodheart-Wilcox Pearson/Prentice Hall Pearson/Prentice Hall Pearson/Prentice Hall Wagner and Smith Goodheart-Wilcox Callanan and Wusinich American Technical Publishers Electrical Wiring: Residential, 16th edition Mullin Thomson/Delmar Learning NEC 2008 (National Electrical Code International Electrical Code Series) National Fire Protection Assoc Practical Problems in Mathematics for Electricians ( ) Herman Delmar
2 Electronic Technology Department Electronic Technology Core Mathematics for Grob Basic Electronics Grob Glencoe 1995 ( ) Electronics Technology: Devices and Circuits Dugger Goodheart and Wilcox 1994 ( ) Computer Service/Network Technician A+ Guide to Managing and Maintaining Your Andrews Thomson PC, 5 th edition, Text ( ) and Lab Manual ( ) Practical Network Cabling ( X) Derfler and Freed Que Network+ Certification, Text ( ) and Lab Guide ( ) Cisco Network Cisco Systems Networking Academy: Engineering Journal/Workbook Vol. 1 ( ) Cisco Systems Networking Academy: First Year Companion Guide ( ) Cisco Systems Networking Academy: Engineering Journal/Workbook Vol. 2 ( ) Cisco Systems Networking Academy: Second Year Companion Guide ( ) Ratliff Prentice Hall/Marcraft
3 CCNP Cisco Networking Academy Program: McGregor Macmillan 2001 Sem. 5 Companion Guide, Advanced Routing ( ) CCNP Cisco NP: Multilayer Switching Companion Guide ( ) Cisco Press 2003 CCNP Cisco Networking Academy Program: Remote Access Companion Guide ( ) CCNP Cisco Networking Academy Program: Semester 5 Lab Companion Advanced Routing ( ) Cisco Macmillan 2002 Technical Occupations Heating and Air Conditioning Service Specialist ACR Electrical Systems (MAVC#400602) MAVCC 1997 Electricity for Refrigeration, Heating, and Air Smith Delmar 2003 Conditioning ( ) Fundamentals and Air Conditioning and Refrigeration (MAVC#800402) MAVCC
4 Practical Problems in Mathematics for DeVore Delmar 1998 Heating and Cooling Technicians ( X) Refrigeration and Air Conditioning Whitman Delmar Technology, 4 th edition ( ) Refrigeration and Air Conditioning Whitman Delmar Technology, Study Guide ( ) Residential and Light Commercial HVAC Stephenson MAVCC (MAVC#601702) Residential Construction Academy HVAC, Silberstein Thomson/Delmar Learning Student Text ( ) Precision and Computer Aided Machining Basic Blueprint Reading and Sketching, 8 th Olivo and Olivo Thomson/Delmar Learning edition ( ) Interpreting Engineering Drawings Jensen Delmar 2002 ( ) Practical Problems in Mathematics for Davis Delmar 1995 Manufacturing ( ) Technology of Machine Tools Drar Glencoe 1997 ( ) Machinery s Handbook 26 ( ) Oberg Industrial 2000 Machining and CNC Technology Fitzpatrick McGraw-Hill Mastercam X: Mill and Solids Lin and Shay Scholars International Technical /Computer Aided Drafting Program Architectural Drafting and Design, 4 th edition Jefferis and Madsen Thomson
5 (Textbook [ ], Solutions Manual, and Workbook) Autocad and Its Applications: Basics, 14 th edition Autocad and Its Applications: Advanced, 14 th edition Architecture Drafting and Design ( ) Electrical and Electronic Drawing ( ) Engineering Drawing and Design Shumaker, Madsen, and Madsen Goodheart and Wilcox Shumaker, Madsen, and Goodheart and Wilcox Madsen Hepler Glencoe 1991 Baer Glencoe 1986 Jensen Glencoe 1990 ( ) Technical Drawing ( ) Giesecke Prentice Hall 2003 Interior Planning and Design ( ) Scalise Thomson/Delmar Learning Welding Oxyacetylene Welding, Cutting and Brazing (EW-269:OAW) Hobart 1983 Basic Shielded Metal Arc Welding Hobart 1981 (EW-369:SMA) Symbols for Welding (EW-342) Hobart 1977 Blueprint Reading for Welders and Fitters Hobart 1978 (EW-459) Gas Metal Arc Welding Basic Hobart 1981 (EW-269: GMA) Gas Tungsten Arc Welding (EW-269:GTAW) Hobart
6 Shielded Metal Arc Welding Advanced 1 Hobart 1982 (EW-269:SMAW) Shielded Metal Arc Welding Advanced 2 Hobart 1995 (EW-269:SMAW) Gas Metal Arc Welding Advanced Hobart 1977 (EW-269:GMA) Flux Cored Arc Welding (EW-269:FCAW) Hobart 1985 Gas Tungsten Arc Welding (TIG) Pipe and Hobart 1979 Tubing (EW-269:GTAW) Shielded Metal Arc Welding Pipe (Uphill) Hobart 1978 (EW-269:SMAW) Shielded Metal Arc Welding Pipe (Downhill) Hobart 1982 (EW-269:SMAW) Pipe Layout for Fitters and Welders (EW 517) Hobart 1983 Transportation Technology Department Automotive Brake Systems, 3 rd edition, Student Text, Shop Manual, Instructor Guide, CD-ROM ( ) Automotive Electricity and Electronics, 3 rd Edition, Student Text and Shop Manual Automotive Engine Performance, 3 rd Edition, Student Text ( ) and Shop Manual Automotive Suspension and Steering Systems, 3 rd edition, Student Text, Shop Manual, Instructor Guide, CD-ROM ( ) Owen Thomson/Delmar Learning Hollembeak Thomson/Delmar Learning Fidler Thomson/Delmar Learning Knowles Thomson/Delmar Learning
7 Automotive Technology: A Systems Erjavec Delmar 2000 Approach ( ) Automotive Technology: A Systems Erjavec Delmar 2000 Approach, Tech Manual ( X) Math for the Automotive Trade, 4 th edition Peterson and dekryger Thomson/Delmar Learning ( ) Today s Technician: Automatic Erjavec Delmar 2003 Transmissions and Transaxles ( ) Today s Technician: Automotive Electricity Hollembeak Delmar 2003 and Electronics ( ) Today s Technician: Automotive Engine Knowles Delmar 1999 Performance ( ) Today s Technician: Automotive Engine Hollembeak Delmar 2002 Repair and Rebuilding ( ) Today s Technician: Automotive Heating and Dwiggins Delmar 2001 Air Conditioning ( X) Today s Technician: Manual Transmissions Erjavec Delmar 2002 and Transaxles ( )) Understanding Math: Fractions (Software) Neufeld 2002 (1-B ) Understanding Math: Graphing (Software) Neufeld 2002 (1-B ) Understanding Math: Integers (Software) Neufeld 2002 (1-B ) Understanding Math: Percent (Software) Neufeld 2002 (1-B ) Collision Repair Technology 7
8 Auto Body Repair Technology, 4 th Edition, Duffy and Scharff Thomson/Delmar Learning Student Text and Technician s Manual I-CAR Professional Automotive Collision Repair, 2nd edition, Textbook and Technicians Manual ( ) Daffy Delmar/Thomson I-CAR Collision Repair CDs (43 each) ICAR Education Foundation Math for the Automotive Trade, 4 th edition Peterson and dekryger Thomson/Delmar Learning ( ) Diesel Equipment Technology Diesel Fundamentals (MAVC#400022) MAVCC 1988 Diesel Engine and Fuel System Repair, 5 h Dagel Prentice Hall edition ( ) Diesel Electrical Systems (MAVC#400042) MAVCC 1989 Hydraulics (MAVC#101112) Decker MAVCC 1986 Diesel Power Trains (MAVC#400072) MAVCC 1983 Sport Vehicle Technology Motorcycles: Fundamentals, Service, Repair Johns Goodheart and Wilcox 1999 ( ) Workbook for Motorcycles: Fundamentals, Johns Goodheart and Wilcox 1999 Service, Repair ( ) Property Management Residential Construction Academy, Facilities Maintenance Standiford Thomson
TECHNOLOGY EDUCATION
TECHNOLOGY EDUCATION Exploratory Technology 8302 Credit 1 This course is designed for freshman and sophomore students that plan to take advanced technology or vocational courses during their four years
OFFICE OF INSTRUCTIONAL PROGRAMS AND SERVICES Summary of State Board of Education Agenda Items January 15 16, 2009
OFFICE OF INSTRUCTIONAL PROGRAMS AND SERVICES Summary of State Board of Education Agenda Items January 15 16, 2009 Office of Curriculum and Instruction 09. Approval of textbook ratings, as recommended
Checklist for Teaching the new Welder Program Outline (Harmonized 2016) using Existing Welding Learning Resources
Checklist for Teaching the new Welder (Harmonized 2016) using Existing Welding Learning The following checklist lists the Lines and Competencies from the new Welder (Harmonized 2016) and references the
High School Course Guide Manufacturing
8A200 Agricultural Mechanics and Metal Technologies (R) 1 credit Gr: 10-12 Prerequisite: Principles of AFNR Description (only at GHS and SGHS) This course is designed to develop an understanding of agricultural
Mechanical Technology Associate in Applied Science- 61 credit hours
Mechanical Technology Associate in Applied Science- 61 credit hours Purpose: The intent of the AAS curriculum is to allow students maximum flexibility in the selection of subject matter. Students may pursue
Excel in CTE Funded Courses
2018-2019 Excel in CTE Funded Courses Course Title Course ID Credit Hours Offered @ High School BUSINESS ACCOUNTING ACC 100 3 MHS / BVHS FINANCIAL ACCOUNTING ACC 120 3 MHS / BVHS COMPUTERIZED ACCOUNTING
MANUFACTURING CLUSTER MANUFACTURING PATHWAY COURSE CODES, DESCRIPTIONS & PRE-REQUISITES
MANUFACTURING CLUSTER MANUFACTURING PATHWAY COURSE CODES, DESCRIPTIONS & PRE-REQUISITES Common Course Code 38001 21108 13207 (Production strand only) 13002 39108 Working Title Course Description Pre-Requisite(s)
Industrial Maintenance Technology
Industrial Maintenance Technology 178 Industrial Maintenance Technology Location: Patterson Campus - Bldg. Q Program Information The Industrial Maintenance Technology Program at is a Multi- Craft curriculum.
Automotive Service Technician Foundation Program AST1 Trades Training. Program Outline
Automotive Service Technician Foundation Program AST1 Trades Training Program Outline PROGRAM IMPLEMENTATION DATE: November 2006 OUTLINE EFFECTIVE DATE: September 2017 PROGRAM OUTLINE REVIEW DATE: March
You are. never too old to set another goal. or to dream a new dream. - C.S. Lewis. NorthwestState.edu NorthwestState.edu
110 You are never too old to set another goal or to dream a new dream. - C.S. Lewis 111 SHORT-TERM TECHNICAL CERTIFICATES Contact: Ron Scozzari 419.267.1429 rscozzari@northweststate.edu NorthwestState.edu
Main Book List by Program - Updated 09/26/17 Book List Key. Course Name. Accounting OCP A
Accounting OCP A OCP B OCP C OCP D 9781934422502 FORMATTING BUSINESS DOCUMENTS $55.14 9781337251891 ENHANCED DISCOVERING COMPUTERS 2017 $98.29 9781305991941 BUNDLE: ILLUSTRATED MICROSOFT OFFICE WORD 2016
Awards Conferred Supplement 2008/ /13
Conferred Supplement / - / Prepared by: September Continuing Education Conferred Report / - / Number and Percentage of Continuing Education Conferred by Year - - - - - CE Certificate of Completion,77,,,,
WINTER SPRING SUMMER FALL
Join us for our ADULT EDUCATION OPEN HOUSE THURSDAY, FEB 22 FROM 10AM - 7PM THURSDAY, MAR 22 FROM 10AM - 7PM THURSDAY, APR 19 FROM 10AM - 7PM THURSDAY, MAY 17 FROM 10AM - 7PM THURSDAY, JUNE 14 FROM 10AM
Business Office Assistant
PUBLISHER / ARS1105 Industrial Refrigeration Handbook 9780070616233 McGraw Hill YES IMT1705 Fluid Power: Hydraulics an Pneumatics, 2nd Edition 9781605259314 Goodheart-Wilcox YES IMT1705 / IMT 1903 Industrial
CPCC FA APPROVED PROGRAMS OF STUDY
APPROVED PROGRAMS Page 6 CPCC FA APPROVED PROGRAMS OF STUDY 2016-2017 TITLE PRG CODE Required Credits DEGREES Associate in Arts A10100 60 Associate in Engineering A10500 60 Associate in Fine Arts A10200
CERT Computed Tomography Specialist 100.0% 100.0% 85.7% 100.0%
PLACEMENT RATES BY LEVEL: AY13 - AY16 LEVEL MAJOR 2015-16 2014-15 2013-14 2012-13 AAS Accounting 100.0% 85.1% 97.4% 100.0% DIP Accounting 100.0% 90.9% 98.0% 100.0% CERT Administrative Support Assistant
Owensboro Community and Technical College Degrees, Diplomas, and Certificates
Owensboro Community and Technical College Degrees, Diplomas, and Certificates Classification of Instructional SOC Code Associate in Arts Degree Associate in Arts 24.0101 No Match Associate in Science Degree
Industry Certification Funding List Division of Workforce Education Certification Program Certification Code Certifying Agency
2008-09 Industry Certification Funding List Division of Workforce Education Certification Program Certification Code Certifying Agency ADDA Drafter Certification AMDDA001 American Design Drafting Association
ASSOCIATE IN APPLIED SCIENCE MAJOR CODE: ENGT
ASSOCIATE IN APPLIED SCIENCE MAJOR CODE: ENGT Your Butler experience will prepare you to apply advanced computer-aided design CAD skills to the creation of graphic representations and simulations in support
Vocational Training Programs
CNC Machinist Course code: 51-4012 Program Title: CNC Machinist Credits: 49.5 600 Clock Hours 24 Weeks Prerequisites: Basic Mathematics Course Description: This course will introduce the student into blueprinting,
Adult Education CLASS SCHEDULE. at a glance. Envision. Experience. Excel WINTER SPRING SUMMER FALL
Adult Education 2017-2018 CLASS SCHEDULE at a glance WINTER SPRING SUMMER FALL Envision. Experience. Excel. THIS SCHOOL IS ACCREDITED BY Give Us a Year and We ll CHANGE YOUR LIFE! TCTC prepares you for
INDUSTRIAL TECHNOLOGIES
55 INDUSTRIAL TECHNOLOGIES Contact: Ron Scozzari 41.267.142 rscozzari@northweststate.edu NorthwestState.edu 2017-201 NorthwestState.edu 56 Industrial Technologies Division Northwest State Community College
Addendum Catalog Volume 7
Addendum 2014-2015 Catalog Volume 7 Effective November 1, 2014 Page 15, Leave of Absence and Standard Period of Non-Enrollment The catalog section shall be replaced with the following information: The
Lake Superior College Graduate Job Placement History
Accountant - AAS 100.0% 66.7% 77.8% 90.0% 100.0% Administrative Office Specialist - AAS 100.0% 100.0% 100.0% 100.0% 100.0% Advanced Inventor (CAD) - Certificate 0.0% X 100.0% 100.0% 100.0% Architectural
Industry Certification Funding List By Program Division of Workforce Education Program Code Certification Certifying Agency
2008-09 Industry Certification Funding List By Program Division of Workforce Education Program Code Certification 8718100 3-D Animation Technology ADOBE011 Adobe Certified Associate (Flash) ADOBE009 Adobe
Total Training Cost. Maximum Scholarship Amount. Pell Grant Eligible. Clock Hours. Credit Hours
INSTITUTION NAME PROGRAM NAME Maximum Scholarship Amount Total Training Cost Credit Hours Clock Hours Pell Grant Eligible AAA SCHOOL OF DENTAL ASSISTING Entry Level Dental Assisting with Expanded Functions
Mississippi Community College Board Spring 2019 Available Certifications
Automotive 47.0604 Automobile Test Auto Maintenance & Light Repair Automatic Transmission/Transaxle Brakes Electrical/Electronic Systems Engine Performance Engine Repair Heating and Air Conditioning Manual
Statewide Articulation Agreements
High School CTE Program & Course Sequence CSN Articulated College Credit/Course CSN Degree/Certificate Pathways BUSINESS & MARKETING Accounting & Finance Accounting & Finance I ACC 201 - Financial Accounting
CPCC APPROVED PROGRAMS OF STUDY
CPCC APPROVED PROGRAMS OF STUDY 2015-2016 TITLE PRG CODE Required Credits DEGREES ASSOCIATE IN ARTS A10100 60 ASSOCIATE IN ENGINEERING A10500 60 ASSOCIATE IN FINE ARTS A10200 64 ASSOCIATE IN SCIENCE A10400
AIR CONDITIONING & REFRIGERATION TECHNOLOGY Associate in Applied Science: 90 Credit Hours
AIR CONDITIONING & REFRIGERATION TECHNOLOGY Associate in Applied Science: 90 Credit Hours Course ACR 1111 EPA Certification Information ACR 1121 Intro to Air Conditioning & Refrigeration Technology ACR
Automotive Technician Textbooks - CS Campus
Automotive Technician Textbooks - CS Campus Books Automotive Technician Cert Test Preparation Manual, 4th ed 9781428321014 AUT119-131, 134-135, 213-217 $ 65.95 $ 5.44 $ 71.39 Automotive Machining and Engine
Academic Program Inventory
Academic Program Inventory Academic Programs Credentials Degree Level CIP CODE SOC Code General Education Associate in Arts AA 24.0101 Associate in Science AS 24.0101 Global Studies AAS 30.2001 - African
NOVA STEM Academy Associate of Science in Engineering
Summer Session 1 - before Credits Summer Session 3 - before entering NOVA Credits SDV 101 College Success Skills 1 Humanities/Fine Arts 3 EGR 115 Engineering Graphics 2 CST 110 Introduction to Communication
Check with your counselor for any school-specific program prerequisites Open to both Juniors and Seniors
Course Description: This program introduces students to the skills needed to inspect, maintain, and repair automobiles and light trucks with internal combustion engines. Instructional units include: Automotive
HEAVY DUTY EQUIPMENT TECHNICIAN
Canadian Council of Directors of Apprenticeship Harmonization Project HEAVY DUTY EQUIPMENT TECHNICIAN Nova Scotia Apprenticeship Agency Industry Consultation February 25, 2015 Overview - Current Heavy
Industrial Welding Technology
Carl Sandburg College 1 Industrial Welding Technology Associate in Applied Science www.sandburg.edu/academics/welding The Welding program is designed to provide the graduate with skills needed to enter
Automotive. Major Code Major Description Award Level. AE41 Automotive Electrical/Electronic Systems Technician Certificate
Students receiving HOPE Grant funds may also be eligible for funding from the HOPE Career Grant. A student s HOPE Career Grant award is a fixed amount per term based on the student s program of study and
Prior Learning Assessment Opportunities (alphabetical by program) Last Updated: 9/8/2014
Prior Learning Assessment Opportunities (alphabetical by program) Last Updated: 9/8/2014 Accounting 10-101- 1: Administrative Professional 10-106- 6: 106-005 Administrative Professional Internship 106-137
State Adopted Instructional Materials with Anticipated Funding for School Year
State Adopted Instructional Materials with Anticipated Funding for School Year 2014-15 ARCHITECTURE AND CONSTRUCTION BUILDING CONSTRUCTION CLUSTER 1, 2, 3, 4 Carpentry, 5th Edition 13-80255 Student Edition
Industrial Technologies
Industrial Technologies Computer Aided Drafting Credential: Associate in Applied Science Degree in Computer-Aided Drafting A50150 The Computer Aided Drafting curriculum prepares graduates for employment
EDGE Course Offerings by College
7 8 9 10 11 1 1 1 1 1 17 18 19 0 A+: Fund. Of Computer Systems 170 IT 70 (Must pass Comp TIA's A+ Certification Exam) Accounting II 10 AC10 Fundamentals of Agri Mechanics 011 TS Component III:Power, Structural
REPORT: EQ0200RG FORT HAYS STATE UNIVERSITY - COURSE EQUIVALENCY SYSTEM 08/11/16 CURRENT COURSE OFFERINGS EVALUATED FOR TRANSFER PAGE: 1
CURRENT COURSE OFFERINGS EVALUATED FOR TRANSFER PAGE: 1 AMT 101 11F Electrical I 3.0 EL 3.0 AMT 103 11F Electrical II 2.0 EL 2.0 AMT 107 11F Engine Performance I 3.0 EL 3.0 AMT 112 08F Automotive Engines
Fall 2016 Program Review
Set for PRC Review in Fall 2018 Program (WELD) - Welding AS.1490 Program Catalog Summary: Associate in Science: SC Program: AS.1490 PROGRAM DESCRIPTION: The Welding Technology Program is designed to prepare
Board of Education Agenda Item
Board of Agenda Item Item: N. Date: January 10, 2008 Topic: First Review of Revisions of Industry, Professional, or Trade Association Certification Examinations and Occupational Competency Assessments
Advanced Systems Technology Program
Advanced Systems Technology Program Organization Washburn Institute of Technology Program Number 47.0303 Instructional Level Instructional Area Certificate Industrial Technology Target Population Secondary
School of Technology & Applied Sciences
Milwaukee Area Technical College Available Certifications and Licensures by School School of Technology & Applied Sciences Civil Engineering Technology Associate Degree During the program you will be prepared
TECHNOLOGY and ENGINEERING EDUCATION
TECHNOLOGY and ENGINEERING EDUCATION SOME OCCUPATIONS RELATED TO INTEREST AND ABILITY IN TECHNOLOGY AND ENGINEERING EDUCATION Engineering: Civil, Mechanical, Industrial, Architectural, Electrical, Chemical,
SOWELA Prior Learning Assessment Matrix
BIOL 1010/1011, General Biology I Biology - BIOL 1010 & POLI 1100, American Government United States Gov. & Politics CHEM 1010/1011, General Chemistry - Chemistry CHEM 1010 & ENGL 1010, English Composition
Manufacturing PROGRAMS STUDY
PROGRAMS STUDY of Computer Numeric Control Machining 724 Basic Certificate (B.C.) 19 Credit Hours (CH) 15 CH 123 CNC Milling Operations & Programming 3 137 CNC Turning Operations & Programming 3 19 CH
Skills and Opportunities in the Defence Industry and Advanced Manufacturing. tafesa.edu.au/defence-industries
Skills and Opportunities in the Defence Industry and Advanced Manufacturing tafesa.edu.au/defence-industries Careers of the future The Commonwealth Government is investing billions of dollars to enhance
Electrical Technology
Electrical Technology 144 Electrical Technology Location: Patterson Campus - Bldg. M Program Information Electrical wiring is an integral part of industry, commercial enterprises, and residential homes.
Secondary Program Name Required Segments Course Number Semester Course Name Credits Post-Secondary CIP Code(s)
Information Post- Information Program Name Required Segments Course Number Semester Course Name Credits Post- (s) 11.0201 Computer Programming and Programmer 5,6,9,10,11 CS 2150 C++ Programming 3 11.0701
Program Title Credential Training Institution
PY 2018-2019 WIOA TRAINING PROGRAMS ELIGIBLE FOR CAREER SOURSE ESCAROSA ITAS Revised 10/15/2018 Program Title Credential Training Institution Accounting Operations Certificate George Stone Center Accounting
ADVANCED TECHNOLOGY CENTER (ATC)
52 ADVANCED TECHNOLOGY CENTER (ATC) Pioneering in Educational Excellence The world of business and industry is a dynamic place, constantly changing and evolving every day. Ongoing, in-depth education based
Sustainability Technologies Credential: Biofuels Certificate in Sustainability Technologies C40370B. Industrial Technologies
Course Requirements for Green Building Certificate Required Courses (17 SHC) ARC 111 Intro to Arch 1-6-3 CST 111 Construction I 3-3-4 CST 112 Construction II 3-3-4 CST 150 Building Science 2-2-3 SST 140
AUTOMOTIVE TECHNOLOGY ASSOCIATE OF APPLIED SCIENCE
MONTANA STATE UNIVERSITY BILLINGS AUTOMOTIVE TECHNOLOGY ASSOCIATE OF APPLIED SCIENCE ADVISING WORKSHEET 2013-2014 City College Jacket Student Central Phone: 406-247-3019 Fax: 406-247-3095 Name Student
CPCC APPROVED PROGRAMS OF STUDY
1 of 8 CPCC APPROVED PROGRAMS OF STUDY 2017-2018 PRG CODE TITLE CIP CODE DEGREES A10100 Associate in Arts 24.0101 A10500 Associate in Engineering 14.0102 A10700 Associate in Fine Arts in Music 24.0101
Automotive Technician Certification Test Preparation Manual 4th Edition
Automotive Technician Certification Test Preparation Manual 4th Edition Appliances, Apps & Games, Arts, Crafts & Sewing, Automotive, Baby, Beauty Pharmacy Technician Certification Quick-Study Guide, 4th
Vocational Degrees & Certificates
VOCATIONAL EDUCATION PROGRAM General Catalog 2011-2013 The vocational training divisions of COM-FSM are learning communities dedicated to creating a high quality workforce through educational excellence
Discipline Review for Penn Valley
Section I: Student Demographics Gender Discipline Review for Penn Valley Fall 27 Fall 28 Fall 29 Fall 2 Fall 2 Female 8 67% 758 63% 788 6% 937 62% 97 62% Male 47 33% 443 37% 58 39% 573 38% 6 38%,27,2,296,5,57
Career and Technology Education (CTE) Assessments by Program of Study CCRCCA Qualification
Career and Technology Education (CTE) Assessments by Program of Study CCRCCA The chart below displays the following: All industry or national assessment per Program of Study (POS) meeting Maryland State
TECHNICAL EDUCATION. Who should apply? Current 10 th & 11 th grade students Students enrolled and in good standing at their home high school
TECHNICAL EDUCATION Who should apply? Current 10 th & 11 th grade students Students enrolled and in good standing at their home high school How are programs offered? Juniors Take a 2 year program in one
1701 North Congress Avenue Austin, Texas FAX tea.texas.gov
7EA Texas Education Agency Commissioner Mike Morath 1701 North Congress Avenue Austin, Texas 78701-1494 512 463-9734 512 463-9838 FAX tea.texas.gov August 21, 2017 TO THE ADMINISTRATOR ADDRESSED SUBJECT:
THE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION
THE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION Welding Industry Careers Welder Materials Engineer Welding Engineer Robotics Technician Welding Technician Business Owner
Program Name CIP Code Required Segments Course Number Course Name Credits Program Name Business, Management and Administration 52.
Business, Management and Administration 52.0299 7 FIN 1010 Personal Finance 3 Business, Management and Administration 52.0299 5,10 LAW 2110 Business Law 3 Business, Management and Administration 52.0299
Catalog Addendum 3 December 2017
2017 2018 Catalog Addendum 3 December 2017 The College of the Desert Catalog Addendum represents course and program revisions made since the last publication of the Catalog. Included in this Addendum are
ADULT EDUCATION PROGRAMS
www.mbit.org 2018-2019 Course Descriptions ADULT EDUCATION PROGRAMS Automotive 2 Computer Courses 3-4 Construction 5 Drafting & Design 5 Evening Course Descriptions 2740 York Road Jamison, PA 18929 Phone:
Students must complete all courses with a 70% (C-) or better to complete the program.
CAD Technology Certificate Program Program Description 222 Clock Hours of Instruction Program Completion Time 9 Months Upon Completion VDCI Professional Technology Certificate Awarded COMPUTER-AIDED DESIGN
Truck Driver Institute (TDI) 5750 East Milton Road, Milton
Eligible Training Providers/Program List WIOA Program Year 2017-2018 Chipola College 3094 Indian Circle, Marianna 32446 850.526.2761 Automotive Service Technology 493023 Business Administration 111021
Course List. Term 2013CCLO. Campus 180th Street & Hwy 10, Cloverdale. Location Cloverdale COMMENT START DATE NOV 12/13
Course List Term 2013CCLO Campus 180th Street & Hwy 10, Cloverdale Location Cloverdale DEPARTMENT AAST - Automotive Mechanics Apprentice COURSE 1020 Apprenticeship: Automotive Service Level 2 SECTION C21
qwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjkl zxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiop asdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmq
qwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjkl zxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiop asdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmq Miami Dade County Public Schools wertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklz
Discipline Review for Blue River
Section I: Student Demographics Gender Discipline Review for Blue River Fall 7 Fall 8 Fall 9 Fall Fall Female 63% 3 4 9% 64 4% 38 Male 46 37% 39% 69 4% 3 4 96 39% 397 386 49 487 4 Ethnicity Am. Indian
TECHNOLOGY DEPARTMENT TECHNICAL & COMPUTER AIDED DRAWING
TECHNOLOGY DEPARTMENT AUTOMOTIVE TECHNOLOGY TRANSPORTATION SYSTEMS (1208) sem This course is an overview of Aerospace, Land and Marine Transportation systems. Vehicle types, engine variations, and auxiliary
Electrical Technology (ELT)
142 The College for Real Careers (ELT) Program Information Electrical wiring is an integral part of industry, commercial enterprises, and residential homes. The Electrical/Instrumentation Technology curriculum
Technical Programs. Technical Programs of Study
Technical Programs Technical programs provide students with the skills necessary for immediate career opportunities. These programs are an excellent fit for students who enjoy working with their hands,
Career and Technical Education. Career Clusters
Career and Technical Education Career Clusters Foundational Courses courses essential for a particular career area - courses that compliment and enrich knowledge of a particular career area Agriculture,
Industry Certification Funding List
2009-10 Industry Certification Funding AMDDA001 ADDA Drafter Certification American Design Drafting Association ADOBE010 Adobe Certified Associate (Dreamweaver) Adobe Systems ADOBE011 Adobe Certified Associate
Degrees and Certificates
Degrees and Certificates 1 Degrees and Certificates Programs, degrees and certificates are listed in alphabetical order (by 1st letter of title). Additionally, degrees and certificates are included under
LINCOLN ELECTRIC EDUCATION PARTNER SCHOOLS
LINCOLN ELECTRIC EDUCATION PARTNER SCHOOLS Lincoln Electric s Welding Certification Program In Partnership with the National Coalition of Certification Centers (NC3) Joining Forces to Advance Welding Education
<Selection_Process> Name of Grant Program. ER Perkins Program Effectiveness Report
Report Status: Report ID: Orga nization: Camp us/site: School Year: Part 5: CTE Concentrator (Codes 2 and 3) Certifications or Licenses Earned No Students Received Certification Help
Transfer Degrees: Total Transfer Degrees 1,088 1,244 1,201 1, Associate in Applied Science
MCC-KC Degrees Awarded by Area of Study 2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 Transfer Degrees: Associate in Arts 984 1,077 1,024 1,185 1195 Associate in Arts - Business 5 48 65 107 131 Associate
MCC-BR Degrees Awarded by Area of Study
2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 MCC-BR Degrees Awarded by Area of Study 2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 Transfer Degrees: Associate in Arts 202 216 190 262 248 Associate
MCC-PV Degrees Awarded by Area of Study
2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 MCC-PV Degrees Awarded by Area of Study 2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 Transfer Degrees: Associate in Arts 104 120 140 138 139 Associate
MCC-MW Degrees Awarded by Area of Study
2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 MCC-MW Degrees Awarded by Area of Study 2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 Transfer Degrees: Associate in Arts 331 350 324 357 394 Associate
Shipbuilding training and career opportunities at TAFE SA. tafesa.edu.au
Shipbuilding training and career opportunities at TAFE SA tafesa.edu.au Join the next generation of Australia s shipbuilders The Australian Government has committed to a naval shipbuilding industry in
Miller Welding Automation. Systems and Robot Training
Miller Welding Automation Systems and Robot Training Miller Training Solutions Thank you for choosing Miller Welding Automation products and recognizing effective technical training is a key element of
Industrial Technologies
2016-17 College Catalog Central Carolina Community College laboratory and mechanical skills need to conduct quality control testing and diagnose biofuels related problems. Upon completion of the certificate
Electrical Systems Technology
Electrical Systems Technology This curriculum is designed to provide training for persons interested in the installation and maintenance of electrical systems found in residential, commercial, and industrial
Sumner County Board of Education 695 East Main Street Gallatin, TN (615) FAX (615)
Sumner County Board of Education 695 East Main Street Gallatin, TN 37066-2472 (615) 451-5200 FAX (615) 451-5216 Approved by the Sumner County Board of Education, meeting in regular session, April 18, 2006.
Automotive Systems Technology
Automotive Systems Technology The curriculum prepares individuals for employment as Automotive Service Technicians. It provides an introduction to automotive careers and increases student awareness of
IP Networking Fundamentals Theory and Practice
IP ing Fundamentals Theory and Practice Introductory course into computer networking Prof. Dr. Károly Farkas Guest Professor Department of Informatics, UZH farkas@ifi.uzh.ch Introduction Reader: Prof.
QUAL-205 Team Problem Solving CAC, SAC, WAC 4 4 Required 18 19
Quality Assurance Associate in Applied Science Technology Division Office: Regional Technology Center M-TEC RTC2700 Phone: (810) 762-0500 The Quality Assurance program is designed to give students the
Kankakee Area Career Center
2016-2017 Kankakee Area Career Center Career & Technical Education At Its Best! Kankakee Area Career Center: About Us The primary purpose of the Kankakee Area Career Center is to meet Career and Technical
Submitted by Diesel, Heavy Equipment and Welding Tanana Valley Campus College of Rural and Community Development University of Alaska Fairbanks
Format 3A New Occupational Endorsement Occupational Endorsement Entry Level Welder Submitted by Diesel, Heavy Equipment and Welding Tanana Valley Campus College of Rural and Community Development University
This qualification has been reviewed. The last date to meet requirements is 31 December 2020.
NZQF NQ Ref 1143 Version 2 Page 1 of 13 National Certificate in Motor Industry (Advanced Technical) (Level 5) with strands in Automotive Electrical and Mechanical, and Collision Repair Level 5 Credits
COE Construction Programs - Catalog Year Construction. Construction Technology. Find the Right Educational Degree Plan
PAGE 1 OF 1 NEXT PAGE UPDATED: 08/02/16 CLICK ON YOUR PLAN. GO TO THAT PAGE. COE Construction Programs - Catalog Year 2016-2017 Find the Right Educational Degree Plan There are two distinctly different
The Following Training Programs are Included in Virginia's New Economy Workforce Industry. Business & Customer Service. Business & Customer Service
The Following Training Programs are Included in Virginia's New Economy Workforce Industry Name of Community College Blue Ridge Community College Credential Grants Program (Updated 5/31/17) Type of Job
Steamfitter/Pipefitter Apprenticeship Year 2 PFIT 2 Trades Training. Program Outline
Steamfitter/Pipefitter Apprenticeship Year 2 PFIT 2 Trades Training Program Outline PROGRAM IMPLEMENTATION DATE: February 2015 OUTLINE EFFECTIVE DATE: February 2015 PROGRAM OUTLINE REVIEW DATE: February
Estimated Program Costs Associate Degree, Technical Diploma/Degree, or Degree Certificates
Estimated Program Costs Associate Degree, Technical Diploma/Degree, or Degree Certificates Total Program Costs include tuition, material and supplemental fees, and other costs. The other costs could include
Program Overview Area 8 - ACC - Design, Manufacturing, Construction, and Applied Technologies Pathway in ACC District
Program Overview Area 8 - ACC - Design, Manufacturing, Construction, and Applied Technologies Pathway in ACC District Emsi Q2 2017 Data Set June 2017 Austin Community College 5930 Middle Fiskville Road