Skills and Opportunities in the Defence Industry and Advanced Manufacturing. tafesa.edu.au/defence-industries
|
|
- Howard Jones
- 5 years ago
- Views:
Transcription
1 Skills and Opportunities in the Defence Industry and Advanced Manufacturing tafesa.edu.au/defence-industries
2 Careers of the future The Commonwealth Government is investing billions of dollars to enhance the capability of Australia s defence forces. Skilled workers will be needed in South Australia and across Australia to build and maintain: > New Navy frigates > New submarines > Armoured vehicles > Communications and surveillance systems > Infrastructure and facilities. This will increase demand for skilled workers who have: > Trade-training in welding and fabrication; electrotechnology; instrumentation and control; heating, ventilation, air-conditioning and refrigeration; and other building and construction trades > Engineering design skills > Programming, electronics and cyber security > Laboratory operations and quality and safety monitoring > Logistics, purchasing and project management. TAFE SA has a variety of qualification that will help you gain the skills that employers need and that support what the Commonwealth calls, the Workforce Behind the Defence Force. TECHNICAL DESIGN > Civil engineer > Designer > Drafting and computer aided designer (CAD) Diploma Engineering MEM50212 Associate Degree Civil and Structural Engineering (Design Drafting) CRS PAINTING, GLAZING AND PROTECTIVE COATINGS Manufacturing > Painter > Glazier > Fibreglass laminator > Trades assistant > Coatings specialist Certificate II Program in Construction Pathways (Painting and Decorating) CPC20211 Incorporating: Certificate II in Construction Pathways Certificate III Painting and Decorating CPC30611 Certificate III Signs and Graphics CPC30216 Certificate III Glass and Glazing MSF30413 Certificate III Wall and Ceiling Lining CPC31211
3 ENGINEERING, WELDING AND FABRICATION > Engineer > Engineering designer > Drafting and computer aided designer (CAD) > Program controller > Project manager > Planner > Estimator Manufacturing > Steelworker > Plater > Hull welder > Boilermaker > Structure welder > Pipe welder > Sheet metal worker > Progress controller (fabrication) > Welding inspector > Welding supervisor > Machinist > Mechanical fitter/technician > Fitter > Turner > Piping designer > Machinery insulator > Progress controller (outfitting) Engineering/Welding Certificate II Engineering Pathways MEM20413 Certificate III Engineering Fabrication Trade MEM30305 Certificate III Engineering Mechanical Trade MEM30205 Certificate III Engineering MEM30505 Certificate IV Engineering MEM40105 Diploma Engineering Advanced Trade MEM50105 Diploma Engineering MEM50212 Civil Engineering Design and Drafting Associate Degree Civil and Structural Engineering (Design Drafting) CRS Various Manufacturing and Welding short courses Apply Welding Principles MEM05026C Gas Metal Arc (MIG) Welding Basic to Advanced Basic: Perform Routine Gas Metal Arc Welding MEM05050B Intermediate: Weld using gas metal arc welding process MEM05017C (pre-requisites required) Advanced: Perform advanced welding using gas metal arc welding process MEM05018C (pre-requisites required) Gas Tungsten Arc (TIG) Welding Basic to Advanced Basic: Perform Routine Gas Tungsten Arc Welding MEM05049B Intermediate: Weld using gas tungsten arc welding process MEM05019C (pre-requisites required) Advanced: Perform advanced welding using gas tungsten arc welding process MEM05020C (pre-requisites required) Manual Metal Arc Welding (MMAW) Basic to Advanced Basic: Perform Routine Manual Metal Arc Welding MEM05012C Intermediate: Weld using manual metal arc welding process MEM05015C (pre-requisites required) Advanced: Perform advanced welding using manual metal arc welding process MEM05016C (pre-requisites required) Perform Welds to Code Standards using Flux Core, Manual Metal, Gas Metal, or Gas Tungsten processes Perform welds to code standards using flux core arc welding process MEM05042B (previously known as Certificate 8F) Perform welds to code standards using gas metal arc welding process MEM05043B (previously known as Certificate 8G) Perform welds to code standards using gas tungsten arc welding process MEM05044B (previously known as Certificate 7) Perform welds to code standards using manual metal arc welding process MEM05046 (previously known as Certificate 1, 1E, 3, 3E) Perform Pipe Welds to Code Standards using Manual Metal Arc Welding Process Perform pipe welds to code standards using manual metal arc welding process MEM05045B (previously known as Certificate 2 and 4) Welding Inspection CSWIP 3.0 (Level 1) WTIA Welder Supervision Course (Cert 10 & AS2214) Perform welding supervision MEM05024B, Apply metallurgy principles MEM24012B Pre-requisite: Apply Welding Principles MEM05026C
4 ELECTROTECHNOLOGY, ELECTRONIC AND ELECTRICAL ENGINEERING, INSTRUMENTATION, MEASUREMENT AND CONTROL > Electrical technician > Electrician > Electrical technical officer > Electronics technician > Electronics technical officer > Instrument technician > Trades assistant Electrotechnology and Electronic and Electrical Engineering Certificate II Electrotechnology (Career Start) UEE22011 Certificate II Electronics UEE21911 Certificate III Electrotechnology Electrician UEE30811 Diploma Electrical Engineering UEE50411 Advanced Diploma Engineering Technology Electrical UEE62111 Advanced Diploma Electrical Engineering UEE62211 Associate Degree Electrical Engineering CRS Associate Degree Electronic Engineering CRS Instrumentation and Control Certificate III Instrumentation and Control UEE31211 Certificate IV Electrical Instrumentation UEE40411 Certificate IV Instrumentation and Control UEE42211 Various Instrumentation and Control/Measurement short courses Programmable Logic Controllers 1 (PLC1) Develop, enter and verify discrete control programs for programmable controllers UEENEEI150A Advanced PLCs Develop, enter and verify word and analogue control programs for programmable logic controllers UEENEEI151A Advanced programming and diagnostic skills associated with medium to high level PLCs, particularly in the areas of analogue and word manipulation.
5 PLUMBING AND WATER OPERATIONS > Plumber > Water operations manager > Hydraulic systems maintenance worker > Trades assistant Certificate II Program in Pre-Vocational Plumbing Incorporating: Certificate II in Metal Roofing and Cladding CPC20812 Certificate III Plumbing CPC32413 Certificate III Water Industry Operations (Networks) NWP30215 Certificate III Water Industry Treatment (Drinking Water) NWP30315 Certificate III Water Industry Treatment (Wastewater) NWP30315 Certificate IV Plumbing and Services (Hydraulic Services Design) CPC40912 Certificate IV Plumbing and Services (Operations) CPC40912 HEATING, VENTILATING, AIR-CONDITIONING AND REFRIGERATION (HVAC&R) > Heating ventilation and air-conditioning (HVAC) installer > Refrigeration mechanic Certificate II Program in Skills for Work and Vocational Pathways (Air-conditioning and Refrigeration) Incorporating: FSK20113 Certificate II in Skills for Work and Vocational Pathways Certificate III Air-conditioning and Refrigeration UEE32211 Certificate IV Air-conditioning and Refrigeration Servicing UEE42711
6 WORKPLACE HEALTH AND SAFETY > Work, Health and Safety coordinator > Work, Health and Safety inspector Certificate IV Work Health and Safety BSB41415 Diploma Work Health and Safety BSB51315 PROJECT MANAGEMENT > Project manager > Material controller > Program controller > Supervisor > Progress control (fabrication) > Progress control (outfitting) Certificate IV Project Management Practice BSB41515 Diploma Project Management BSB51415 LEADERSHIP > Supervisor > Team leader > Foreman > Manager > Human Resources Advisor > Human Resources Manager Certificate IV Human Resources BSB41015 Certificate IV Leadership and Management BSB42015 Diploma Human Resources Management BSB50615 Diploma Leadership and Management BSB51915 Advanced Diploma Leadership and Management BSB61015 Advanced Diploma Management (Human Resources) BSB60915
7 INFORMATION TECHNOLOGY, PROGRAMMING, CYBER SECURITY AND SIMULATION > Cyber security > Computer programmer > Network security coordinator > Systems administrator > Digital systems illustrator > Game artist > Digital marketer > Software developer > Shipyard producer and event simulator Information Technology Certificate I Information, Digital Media and Technology ICT10115 Certificate II Information, Digital Media and Technology ICT20115 Certificate III Information, Digital Media and Technology ICT30115 Certificate IV Information Technology ICT40115 Certificate IV Information Technology Networking ICT40415 Diploma Information Technology Networking ICT50415 Advanced Diploma Computer Systems Technology ICT60515 Programming Certificate IV Programming ICT40515 Diploma Software Development ICT50715 Cyber Security Advanced Diploma Network Security ICT60215 Simulation Certificate IV Digital Media Technologies ICT40815 Diploma Digital Media Technologies ICT50915 Diploma Program in Simulation and Serious Games Incorporating: Diploma of Screen and Media CUA51015 ACCOUNTING AND COSTS ESTIMATION > Accountant > Purchasing officer > Costs estimator > Procurement officer > Procurement manager Certificate III Accounts Administration FNS30317 Certificate IV Accounting and Bookkeeping FNS40217 Diploma Accounting FNS50217 Diploma Purchasing BSB51515 Advanced Diploma Accounting FNS60217
8 tafesa.edu.au/defence-industries RTO Code: CRICOS Code: 00092B HEP Code: PRV14002 Accurate as at 20 August 2018
Shipbuilding training and career opportunities at TAFE SA. tafesa.edu.au
Shipbuilding training and career opportunities at TAFE SA tafesa.edu.au Join the next generation of Australia s shipbuilders The Australian Government has committed to a naval shipbuilding industry in
More informationTAFE ILLAWARRA - semester 1, 2017 PROPOSED COURSES
Agriculture & Animal Studies AHC20116 Certificate II Agriculture ACM20110 Certificate II Animal Studies AHC30116 Agriculture AHC30216 Agriculture (Dairy Production) ACM30110 Animal Studies ACM30410 Companion
More informationTAFE ILLAWARRA - SEMESTER 1, 2017 PROPOSED COURSES
AGRICULTURE & ANIMAL STUDIES AHC20116 Certificate II Agriculture ACM20110 Certificate II Animal Studies AHC30116 Agriculture AHC30216 Agriculture (Dairy Production) ACM30110 Animal Studies ACM30410 Companion
More informationIndicative fees for students commencing a course in 2019
Indicative fees for students commencing a course in 2019 1. These fees are estimates only for students enrolling in government funded courses in 2019 on a full time basis. 2. The indicative fees for a
More informationExxon Mobil PNG LNG Community Development & Training Services Overview of Services
Overview of Exxon Mobil PNG LNG 1 Overview of Community Devleopment & Training Orion has been awarded a number of community development, recruitment and training service contracts around the world. One
More informationSeychelles Institute of Technology (SIT) Tel , Fax ,
Seychelles Institute of Technology (SIT) Tel. 248 4601501, Fax 248 4601059, Email: director.sit@eduhq.edu.sc INFORMATION FOR S5 SCHOOL LEAVERS INTRODUCTION The Seychelles Institute of Technology (SIT)
More informationour values Specialised maintenance and project delivery services to the mining, heavy industry, manufacturing and utilities sectors.
Specialised maintenance and project delivery services to the mining, heavy industry, manufacturing and utilities sectors. our values ZERO HARM INTEGRITY CONTINUOUS IMPROVEMENT INDIVIDUAL ACCOUNTABILITY
More informationManufacturing Career Pathways & Skill Standards (Credentials) Graphic Model
Manufacturing Career Pathways & Skill Standards (Credentials) Graphic Model Prepared by the Center for Individual & Organizational Effectiveness (C4IOE.com) for the Tri-County Workforce Investment Board
More informationNGINEERING ECHNOLOGY. ENGINEERING and TECHNOLOGY. Level 2 Diploma in. Qualification Specification. Issue 1.0. Overview
NGINEERING ECHNOLOGY Level 2 Diploma in ENGINEERING and TECHNOLOGY Qualification Specification Overview This qualification has been developed to provide learners with an intermediate knowledge and understanding
More informationMANUFACTURING CLUSTER MANUFACTURING PATHWAY COURSE CODES, DESCRIPTIONS & PRE-REQUISITES
MANUFACTURING CLUSTER MANUFACTURING PATHWAY COURSE CODES, DESCRIPTIONS & PRE-REQUISITES Common Course Code 38001 21108 13207 (Production strand only) 13002 39108 Working Title Course Description Pre-Requisite(s)
More informationHigh School Course Guide Manufacturing
8A200 Agricultural Mechanics and Metal Technologies (R) 1 credit Gr: 10-12 Prerequisite: Principles of AFNR Description (only at GHS and SGHS) This course is designed to develop an understanding of agricultural
More informationCanterbury Skill Shortage List
Canterbury Skill Shortage List This is the revised Canterbury Skill Shortage List, effective from 14 August 2017. See notes at the end of this list. Occupational Group Occupation and ANZSCO number Building
More informationOwensboro Community and Technical College Degrees, Diplomas, and Certificates
Owensboro Community and Technical College Degrees, Diplomas, and Certificates Classification of Instructional SOC Code Associate in Arts Degree Associate in Arts 24.0101 No Match Associate in Science Degree
More informationINDUSTRIAL TECHNOLOGIES
55 INDUSTRIAL TECHNOLOGIES Contact: Ron Scozzari 41.267.142 rscozzari@northweststate.edu NorthwestState.edu 2017-201 NorthwestState.edu 56 Industrial Technologies Division Northwest State Community College
More informationLake Superior College Graduate Job Placement History
Accountant - AAS 100.0% 66.7% 77.8% 90.0% 100.0% Administrative Office Specialist - AAS 100.0% 100.0% 100.0% 100.0% 100.0% Advanced Inventor (CAD) - Certificate 0.0% X 100.0% 100.0% 100.0% Architectural
More informationTraineeships Course List 2015
Traineeships Course List 2015 Get skills for a better future This training is subsidised by the NSW Government. TAFE Western is approved to offer traineeships for the eligible students in the courses listed
More informationTraineeships Course List 2015
Traineeships Course List 2015 Get skills for a better future This training is subsidised by the NSW Government. TAFE Western is approved to offer traineeships for the eligible students in the courses listed
More informationTHE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION
THE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION Welding Industry Careers Welder Materials Engineer Welding Engineer Robotics Technician Welding Technician Business Owner
More informationYou are. never too old to set another goal. or to dream a new dream. - C.S. Lewis. NorthwestState.edu NorthwestState.edu
110 You are never too old to set another goal or to dream a new dream. - C.S. Lewis 111 SHORT-TERM TECHNICAL CERTIFICATES Contact: Ron Scozzari 419.267.1429 rscozzari@northweststate.edu NorthwestState.edu
More informationCERT Computed Tomography Specialist 100.0% 100.0% 85.7% 100.0%
PLACEMENT RATES BY LEVEL: AY13 - AY16 LEVEL MAJOR 2015-16 2014-15 2013-14 2012-13 AAS Accounting 100.0% 85.1% 97.4% 100.0% DIP Accounting 100.0% 90.9% 98.0% 100.0% CERT Administrative Support Assistant
More informationDUKE UNIVERSITY CONSTRUCTION STANDARDS
1 00 01 10 Table of Contents DIVISION 00: PROCUREMENT AND CONTRACTING REQUIREMENTS 00 01 10 Table of Contents 06.17.2014 00 21 13 Instructions to Bidders 11.08.2013 00 22 13 Supplementary Instructions
More informationWORK-LEARN TECHNICAL DIPLOMA
Work-Learn Technical Diploma 282 WORK-LEARN TECHNICAL DIPLOMA General Information The ITE Work-Learn Technical diploma is a work-study programme designed to create alternative pathways of success for ITE
More informationNZQF NQ Ref 1545 Version 2 Page 1 of 13
NZQF NQ Ref 1545 Version 2 Page 1 of 13 National Certificate in (Level 5) with strands in Engineering Fabrication, Fire Protection, General and Maintenance Engineering, Mechanical Services, and Precision
More information[GREEN JOB PROGRAMS AT CLC]
Engineering, Math and Physical Architectural Technology Civil & Environmental Technology Construction Management Technology Plan 24CB Plan 24CF Plan 24VA Plan 24BA Plan 24BF 62 Part of program 34 Part
More informationAcademic Program Inventory
Academic Program Inventory Academic Programs Credentials Degree Level CIP CODE SOC Code General Education Associate in Arts AA 24.0101 Associate in Science AS 24.0101 Global Studies AAS 30.2001 - African
More information2017 COURSE GUIDE BE CREATIVE BE JOB READY BE AMBITIOUS
2017 COURSE GUIDE BE CREATIVE BE JOB READY BE AMBITIOUS WHAT S YOUR AMBITION? Want to be job ready? Or maybe more hands-on? A great role model? Whatever you want to be, North Coast TAFE can help you achieve
More informationEFFICIENT, EFFECTIVE, RESPONSIVE QUALIFICATIONS FOR INDUSTRY
EFFICIENT, EFFECTIVE, RESPONSIVE QUALIFICATIONS FOR INDUSTRY Regulated Qualifications December 2016 IOSH Membership - ProQual Level 5 NVQ Diploma in Occupational Health and Safety Practice We are pleased
More informationCompany information PROTEC Facility Solutions PROTEC GmbH » Established: *» General Manager: Ralf Wogawa
Company information PROTEC Facility Solutions PROTEC GmbH» Established: 02.2008*» General Manager: Ralf Wogawa» Main Office: Heidelberg» Locations: Baumholder Kaiserslautern Stuttgart Wiesbaden» Employees:
More informationEstimated Fees for Semester
Estimated Fees for Semester 2 2017 Please note: Fees will vary in accordance to the type of course you are studying, the study mode, whether you enrol in a semester course or a year-long course and how
More informationLOCATION Delivered at one of PMV s national training centres (Perth and Brisbane), or at a client s facility.
- CERTIFICATE III IN INSTRUMENTATION AND CONTROL WHO IS THIS COURSE AIMED AT? The Certificate III course is aimed at those who would like to enhance their PLC, HMI and process skills giving them the edge
More informationAIR CONDITIONING & REFRIGERATION TECHNOLOGY Associate in Applied Science: 90 Credit Hours
AIR CONDITIONING & REFRIGERATION TECHNOLOGY Associate in Applied Science: 90 Credit Hours Course ACR 1111 EPA Certification Information ACR 1121 Intro to Air Conditioning & Refrigeration Technology ACR
More informationThe inventory of SIAST approved programs includes all approved programs, their credential, formal accrediation (if applicable) and campus of offering
SIAST PROGRAM INVENTORY The inventory of SIAST approved programs includes all approved programs, their credential, formal accrediation (if applicable) and campus of offering s with multi-site offerings
More informationEFFICIENT, EFFECTIVE, RESPONSIVE QUALIFICATIONS FOR INDUSTRY
EFFICIENT, EFFECTIVE, RESPONSIVE QUALIFICATIONS FOR INDUSTRY Regulated Qualifications - December 2015 December Focus Policing qualifications ProQual Diploma in Policing (QCF) ProQual Diploma in Policing
More informationQualification Manual. Level 3 Diploma in NGINEERING. Fabrication and Welding. Engineering Technology. Qualification Code: 501/1131/0. Issue 2.
Qualification Manual Level 3 Diploma in Fabrication and Welding NGINEERING Engineering Technology Qualification Code: 501/1131/0 Issue 2.0 0 Engineering and Technology Contents 1.0 About EAL 2.0 Introduction
More informationEFFICIENT, EFFECTIVE, RESPONSIVE QUALIFICATIONS FOR INDUSTRY
EFFICIENT, EFFECTIVE, RESPONSIVE QUALIFICATIONS FOR INDUSTRY Regulated Qualifications - May 2016 April Focus Advanced Learner Loans SFA Learner Loan funding is available for many of our and Level 4 qualifications,
More informationIndustrial Technologies
Industrial Technologies Computer Aided Drafting Credential: Associate in Applied Science Degree in Computer-Aided Drafting A50150 The Computer Aided Drafting curriculum prepares graduates for employment
More informationCAREERS SNAPSHOT INFORMATION AND COMMUNICATIONS TECHNOLOGY TAFENSW.EDU.AU TAFE NSW STRATEGY
CAREERS SNAPSHOT TAFE NSW STRATEGY INFORMATION AND COMMUNICATIONS TAFENSW.EDU.AU Which occupations in this industry are likely to have the largest employment growth over the next three years? Which TAFE
More informationNuclear Standards Advisory Group. September Issue v1.1
September 2017 Issue v1.1 Map for the Nuclear Industry This Map has been developed in conjunction with the Nuclear Standards Advisory Group. It is intended to be a useful guide for those in the UK nuclear
More informationApproved Training Providers
Training Provider 2013-2014 Approved Training Providers Approved Training Program Total Program Cost Azure College Nursing $ 25,665.00 Practical Nursing $ 14,167.00 Career Tech Commercial Truck Driver
More informationNational Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4
NZQF NQ Ref 0124 Version 6 Page 1 of 12 National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4 Credits 254 This qualification has been reviewed. The
More informationHEATING TECHNICIAN INDUSTRY TRAINING PROGRAM PROFILE RECOGNIZED PROGRAM. Occupation Description. Pathways to Certification. Recommended Education
HEATING TECHNICIAN Occupation Description means a person who performs construction related tasks in the residential market dealing with the design, installation and servicing of heating, ventilation and
More informationAS2214 Certification of Welding Supervisors Structural Steel. AS1796 Certification of Welders and Welding Supervisors Cert 10.
First time APPLICATION AS2214 Certification of Welding Supervisors Structural Steel AS1796 Certification of Welders and Welding Supervisors Cert 10 Both NAME: ADDRESS: EMAIL: PHONE: FAX: MOBILE: POSTCODE:
More informationCOURSE LIST SEMESTER 1. southmetrotafe.wa.edu.au SEE INSIDE FOR A LIST OF COURSES AVAILABLE AT SOUTH METROPOLITAN TAFE LAST UPDATED: 02/12/2016
SEE INSIDE FOR A LIST OF COURSES AVAILABLE AT SOUTH METROPOLITAN TAFE COURSE LIST SEMESTER 1 2017 LAST UPDATED: 02/12/2016 Visit our website www. All South Metro TAFE campuses are now smoke-free STUDYING
More informationHRWDB Approved Individual Training Account (ITA) Programs
HRWDB Approved Individual Training Account (ITA) Programs Training Provider Program(s) 1. Abbott Education Center Certified Nurse Aide 2. Adult Learning Center, Virginia Beach Public Schools Certified
More informationCertificate III in Telecommunications Digital Reception Technology
ICT30410 Qualification Notes Certificate III in Telecommunications Digital Reception Technology Descriptor This qualification reflects the role of an individual in the telecommunications industry who can
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2015.
NZQF NQ Ref 0534 Version 4 Page 1 of 15 National Diploma in (Level 6) with strands in Mechanical, Production, and Mechanical Services, and with an optional strand in Practical Endorsement Level 6 Credits
More information1701 North Congress Avenue Austin, Texas FAX tea.texas.gov
7EA Texas Education Agency Commissioner Mike Morath 1701 North Congress Avenue Austin, Texas 78701-1494 512 463-9734 512 463-9838 FAX tea.texas.gov August 21, 2017 TO THE ADMINISTRATOR ADDRESSED SUBJECT:
More informationApprenticeship and Industry Training Act
Apprenticeship and Industry Training Act Certification and Certificate Recognition Order Board Order 2/2009 Consolidated to September 22, 2017 NOTE This is an order of the Alberta Apprenticeship and Industry
More informationENGINEERING. Apply online: CAREER OPPORTUNITY
Apply online: www.midkent.ac.uk/ ENGINEERING Our courses and higher apprenticeships train the engineers of the future as well as those who are already working in the industry. You ll learn the analytical,
More informationASSOCIATE IN APPLIED SCIENCE MAJOR CODE: ENGT
ASSOCIATE IN APPLIED SCIENCE MAJOR CODE: ENGT Your Butler experience will prepare you to apply advanced computer-aided design CAD skills to the creation of graphic representations and simulations in support
More informationHRWDB Approved Individual Training Account (ITA) Programs
HRWDB Approved Individual Training Account (ITA) Programs Training Provider Program(s) 1. Abbott Education Center Certified Nurse Aide 2. Adult Learning Center, Virginia Beach Public Schools Certified
More informationQCTO Pre-Scoping Presentation SAMSA 13 November 2014
QCTO Pre-Scoping Presentation SAMSA 13 November 2014 QCTO Presentation SAMSAl 141113 1 Scoping Agenda Welcome Attendance and introductions Expectations QCTO Mandate Purpose of Occupational Qualifications
More informationAutomotive. Major Code Major Description Award Level. AE41 Automotive Electrical/Electronic Systems Technician Certificate
Students receiving HOPE Grant funds may also be eligible for funding from the HOPE Career Grant. A student s HOPE Career Grant award is a fixed amount per term based on the student s program of study and
More informationConstruction Technical, Supervision and Management (England)
Construction Technical, Supervision and Management (England) Issued by Construction Skills Construction Technical, Supervision and Management (England) Information on the Issuing Authority for this framework:
More informationManufacturing PROGRAMS STUDY
PROGRAMS STUDY of Computer Numeric Control Machining 724 Basic Certificate (B.C.) 19 Credit Hours (CH) 15 CH 123 CNC Milling Operations & Programming 3 137 CNC Turning Operations & Programming 3 19 CH
More informationtafesa.edu.au VET FOR SCHOOLS INFORMATION TECHNOLOGY
tafesa.edu.au VET FOR SCHOOLS INFORMATION TECHNOLOGY TAFE SA Information Technology Studies program can offer you vocational education and training (VET) for schools as part of our nationally recognised
More informationSIAST Program Inventory. Introduction
SIAST Program Inventory Introduction The inventory of SIAST approved programs includes all approved programs, their credential and campus of offering. Programs with multi-site offerings are considered
More informationMEM31215 Certificate III in Engineering - Industrial Electrician
MEM31215 Certificate III in Engineering - Industrial Electrician Release 2 MEM31215 Certificate III in Engineering - Industrial Electrician Modification History Release 2. MSAENV272B updated to MSMENV272.
More informationHRWDB Approved Individual Training Account (ITA) Programs
HRWDB Approved Individual Training Account (ITA) Programs Training Provider Program(s) 1. Abbott Education Center Certified Nurse Aide 2. Adult Learning Center, Virginia Beach Public Certified Clinical
More informationPlease note that tuition fees are updated each year. The tuition fees below will apply to all students enrolled in that academic year.
The Public School tuition fees are listed below the TAFE tuition fees table. The following fees have been approved by the Minister for Education and Training pursuant to the Vocational Education and Training
More informationTAFE NSW DEGREES International Student Guide
DEGREES enjoys an enviable reputation for creating highly capable, industry-ready graduates. Our degrees are designed to give you the foundational knowledge and technical skills you need to excel in your
More informationNational Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5)
NQF Ref 0718 Version 2 Page 1 of 10 National Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5) Level 5 Credits 110 This qualification is expiring. The last date to meet the
More informationEligibility for Trades
सम बन धधत ट र ड म NCVT द व र म धयत प र प त आई.ट.आई. अथव न च दर श त ब च म AICTE द व र म धयत प र प त स स थ न स डडप ऱ म अथव डडग र उत त र Trade Architectural Assistant Attendant Operator (Chemical Plant) Basic
More informationAwards Conferred Supplement 2008/ /13
Conferred Supplement / - / Prepared by: September Continuing Education Conferred Report / - / Number and Percentage of Continuing Education Conferred by Year - - - - - CE Certificate of Completion,77,,,,
More informationCOE Construction Programs - Catalog Year Construction. Construction Technology. Find the Right Educational Degree Plan
PAGE 1 OF 1 NEXT PAGE UPDATED: 08/02/16 CLICK ON YOUR PLAN. GO TO THAT PAGE. COE Construction Programs - Catalog Year 2016-2017 Find the Right Educational Degree Plan There are two distinctly different
More informationSIAST Program Inventory. Introduction
SIAST Program Inventory Introduction The inventory of SIAST approved programs includes all approved programs, their credential and campus of offering. Programs with multi-site offerings are considered
More informationNational Certificate in Electrical Engineering (Electrician for Registration) (Level 4)
NZQF NQ Ref 1195 Version 3 Page 1 of 11 National Certificate in Electrical Engineering (Electrician for Registration) (Level 4) Level 4 Credits 249 This qualification has been revised. The last date to
More informationStudents must complete all courses with a 70% (C-) or better to complete the program.
CAD Technology Certificate Program Program Description 222 Clock Hours of Instruction Program Completion Time 9 Months Upon Completion VDCI Professional Technology Certificate Awarded COMPUTER-AIDED DESIGN
More informationEstimated Fees for Semester
Estimated Fees for Semester 1 2017 Please note: Fees will vary in accordance to the type of course you are studying, the study mode, whether you enrol in a semester course or a year-long course and how
More informationWODONGATAFE Building success through learning
WODONGATAFE Building success through learning COURSE GUIDE 2018 Wodonga TAFE 2018 The course information provided in this publication is a summary intended for prospective students, and is correct at the
More informationArchitectural Technology
Architectural Technology The Architectural Technology curriculum prepares individuals to apply technical knowledge and skills to the fields of architecture, construction, construction management, facility
More informationNGINEERING ANUFACTURE
NGINEERING ANUFACTURE Level 1 Diploma in ENGINEERING and MANUFACTURE Qualification Specification Overview This qualification has been developed predominantly for young people in full time education who
More informationTitle: EAL Level 2 Certificate in BusinessImprovement Techniques (QCF) At a glance. Level: Credit value: Guided learning hours: Minimum learner age:
Title: EAL Level 2 Certificate in BusinessImprovement Techniques (QCF) At a glance Qualification code: Level: Credit value: Guided learning hours: Minimum learner age: Registration end date: Certification
More informationas at 25/05/ Standards Fees and Charges Diploma & above VET Student Loan eligible courses Course Fees + Resource Fees (Concession)
Indicative fees for students commencing a course in 2017 (Courses in Scope and Not Replaced) 1. These fees are estimates only for students enrolling in government funded courses in 2017 on a full time
More informationThe Edge Training Portfolio
The Edge Training Portfolio www.gen2.ac.uk 1 The Edge Contents The Edge 3 We are delighted to introduce The Edge, a new 8.5M funded project which runs until July 2018 and focusses on: Training Programmes
More information2018 Fee Schedule for TAFE International Western Australia and Public Schools
The Public School tuition fees are listed below the TAFE tuition fees table. The following fees have been approved by the Minister for Training and Workforce Development pursuant to the Vocational Education
More informationAGRICULTURE, FOOD & NATURAL RESOURCES
0-0 Career Clusters Articulation Guide Courses are articulated with one or more high schools. (This is a guide and its content is subject to change.) NOTE: Some of these courses may also be accepted as
More informationVOCATIONAL QUALIFICATIONS ENTRY CODES 2017/18. ocr.org.uk
VOCATIONAL QUALIFICATIONS ENTRY CODES 2017/18 ocr.org.uk Contents Introduction 1 Key to forms of assessment 1 Version control 2 1 Skills for Business 3 1.1 Administration (Business Professional) 3 1.2
More information137 (70%) with organisations on Register of Apprenticeship Assessment Organisations
Apprenticeship Standards and End-point assessment organisations As at October 2017 there are: Standards 196 with assessment plans that are Ready for Delivery 137 (70%) with organisations on Register of
More informationGadsden: (850) Leon: (850) Wakulla: (850) Executive Center: (850) Toll Free: (844) CAREER1
Gadsden: (850) 875-00 Leon: (850) 9-00 Wakulla: (850) 96-0980 Executive Center: (850) 1-6085 Toll Free: (8) CAREER1 Name Training Provider(s) Type A/C, Refrigeration and Heating Technology ELIGIBLE TRAINING
More informationTECHNOLOGY EDUCATION
TECHNOLOGY EDUCATION Exploratory Technology 8302 Credit 1 This course is designed for freshman and sophomore students that plan to take advanced technology or vocational courses during their four years
More informationThis qualification has been revised. The last date to meet the requirements is 31 December 2021.
NQF Ref 0223 Version 6 Page 1 of 8 National Certificate in Electrical Engineering (Level 3) Level 3 Credits 149 This qualification has been revised. The last date to meet the requirements is 31 December
More informationList of Legal and Prescribed Qualifications Required for Certain Classes of Employment Included in the Classification Plan for Support Personnel CÉGEP
List of Legal and Prescribed Qualifications Required for Certain Classes of Employment Included in the Classification Plan for Support Personnel CÉGEP June 2012 List of Legal and Prescribed Qualifications
More informationAdult Education CLASS SCHEDULE. at a glance. Envision. Experience. Excel WINTER SPRING SUMMER FALL
Adult Education 2017-2018 CLASS SCHEDULE at a glance WINTER SPRING SUMMER FALL Envision. Experience. Excel. THIS SCHOOL IS ACCREDITED BY Give Us a Year and We ll CHANGE YOUR LIFE! TCTC prepares you for
More informationProgram Title Credential Training Institution
PY 2018-2019 WIOA TRAINING PROGRAMS ELIGIBLE FOR CAREER SOURSE ESCAROSA ITAS Revised 10/15/2018 Program Title Credential Training Institution Accounting Operations Certificate George Stone Center Accounting
More informationApproved Training Providers Programs
2014-2015 Approved Training Providers Programs PROGRAM DEGREE TRAINING PROVIDER LOCATION COST A+ Certification Diploma New Horizons Computer Learning Center Orlando $ 3,945.00 A+, Network+, CCNA Diploma
More informationEAL Level 3 Award In Approving Electrical Installation Work in Dwellings in Compliance with Building Regulations (QCF)
Title: EAL Level 3 Award In Approving Electrical Installation Work in Dwellings in Compliance with Building Regulations (QCF) At a glance Qualification code: Level: Credit value: Guided learning hours:
More informationContents NQF. Engineer your learning pathway by choosing one of INTEC s courses. INTEC Introduction to Mechanical Engineering Certificate
Agent Programme INTEC Programme Career Programme Career Booster Career Starter Job Creator Self Enrichment With complex machinery being at the heart of modern industry, Mechanical Engineering is a dynamic
More information6. Registered Nurse Bachelor of Nursing or Diploma in Comprehensive Nursing, diploma or hospital based certificate and NZ registration
[date] CHEN Deming Minister of Commerce People s Republic of China Your Excellency, I have the honour to refer to the signing on this date of the New Zealand China Free Trade Agreement ( the Agreement
More informationENGINEERING AND TECHNICAL SCIENCES DIVISION SUPPLEMENTAL TEXTS
Building Trades Department Cabinetmaking and Millwork Modern Cabinetmaking, Textbook (1-59070- 376-6), Instructor s Manual (1-59070-378-2) and Workbook (1-59070-377-4) Carpentry Carpentry Framing and Finishing,
More informationQuality Assurance in the occupational learning system. Presented by : Sifiso Mkhonza Director: Occupational Qualifications Design
Quality Assurance in the occupational learning system Presented by : Sifiso Mkhonza Director: Occupational Qualifications Design NQF landscape after 2008 NQF Act (No 67 of 2008) makes provision for an
More informationTVET TAFE DELIVERED VOCATIONAL EDUCATION AND TRAINING
TVET TAFE DELIVERED VOCATIONAL EDUCATION AND TRAINING BE JOB READY GAIN PRACTICAL SKILLS AND EXPERIENCE AMBITION BEGINS WITH TAFE NSW The material contained in this document is intended to provide you
More informationInformation and Communication Technology
Information and Communication Technology 2018-2019 For the latest information visit thegordon.edu.au Call 5225 0600 Contents Student Profile 03 Computer and Network Systems ICT40415 Certificate IV in Information
More informationWorkforce Development Overview CAREER PATHWAY PROGRAMS
Advanced Manufacturing (examples): Welder CNC Machine Programmers and Operators Industrial Electrical Technician Industrial Maintenance Technician Production Technician Manufacturing Engineers Healthcare
More informationIndicative fees for students commencing a course in 2019
Indicative fees for students commencing a course in 2019 1. These fees are estimates only for students enrolling in government funded courses in 2019 on a full time basis. 2. The indicative fees for a
More informationQualification of National Board Team Leaders and National Board Representatives
Qualification of National Board Team Leaders and National Board Representatives The National Board of Boiler and Pressure Vessel Inspectors 1055 Crupper Avenue Columbus, Ohio 43229 614.888.8320 NB-290,
More informationPrograms and Awards Listing by Centers of Excellence
A. Academic Degrees 1. Associate in Arts 2. Associate in I. Academics B. English and Communication 1. Associate of Arts in Communication 2. Associate of Arts in English 3. Interpreting/Sign Language -
More informationInternationally Accredited Coating Applicator Training and Certification Programme
Internationally Accredited Coating Applicator Training and Certification Programme Welcome SSPC Trainthepainter is an internationally recognised Coating Applicator training and certification programme.
More informationCollege and Career Readiness. Basic Skills PLUS Career Pathways by College and NC Career Cluster 1
and Career Readiness Basic Skills PLUS Career Pathways by and NC Career Cluster 1 (October 2016) Basic Skills PLUS is a program that provides workforce preparation activities and workforce training for
More information2-Day Exclusive Sale on NOW! HURRY - Ends 28th September!
2-Day Exclusive Sale on NOW! HURRY - Ends 28th September! Just imagine having the skills to confidently oversee the day to day administration needs of an office. Business administration professionals comprise
More information