Network Master Series

Transcription

1 Data Sheet Network Master Series Network Master Flex MT1100A 10G Multirate Module MU110010A 100G Multirate Module MU110011A 40/100G Module CFP2 MU110012A 40/100G Advanced Module MU110013A

2 Network Master Flex MT1100A Overview Redefining Transport Testing All-in-one Support for R&D, Manufacturing and I&M of 100 Gbps Core and Metro Networks Today s core and metro communications networks are implementing 100 GigE and OTN technologies rapidly to provide sufficient bandwidth supporting the explosive increase in mobile communications data. These high-bit-rate networks demand very high reliability due to the large data volumes and variety of client signals in use. Consequently, every stage from R&D through to manufacturing, installation, and maintenance, requires precision testing and verification of network equipment and transport devices. The all-in-one Network Master Flex MT1100A supports all the latest communications network technologies. Selecting and installing up to two modules from a range of three module options supports all-in-one R&D, manufacturing, installation and maintenance tests of network and transport equipment operating at bit rates from 1.5 Mbps to 100 Gbps. The large, 12.1-inch color LCD touch panel with easy-to-use GUI plus remote operation of a full range of test functions over an Internet connection greatly improves test efficiency and helps cut costs. Key Benefits and Features: All-in-one transport tester Supports testing from 1.5 Mbps to 100 Gbps Up to 4 ports at all rates Various interfaces for optical transceivers support: CFP, CFP2, CFP4, CXP, QSFP+, SFP+, SFP Various interfaces for electrical support: CAUI, XLAUI, CAUI4 Easy and intuitive GUI WLAN/Bluetooth/LAN connectivity PDF, CSV and XML report generation for documenting test results Remote operation (VNC, Dedicated GUI software) Remote control (scripting, via Ethernet, WLAN, GPIB) Compact, lightweight design for maximum field portability High performance in small form factor Modular platform ensuring maximum return on investment Key Applications: Core and metro networks installation and maintenance OTN up to OTU4 including mapping of Ethernet, CPRI, Fibre Channel and SDH/SONET client signals, multistage mapping and FEC (Forward Error Correction) also supporting O.182 Poisson error addition Testing and verification of new OTN functions ODU0, ODU2e, ODU3e1, ODU3e2, ODU4, ODUflex Carrier Class Ethernet installation and troubleshooting Ethernet testing up to 100 Gbps including RFC 2544, Y.1564 and RFC 6349 (Up to 10 Gbps) 100GBASE-SR4 RS-FEC Ethernet OAM MPLS-TP and PBB IP Channel Statistics (up to 10 Gbps) Frame capture for advanced troubleshooting Mobile Fronthaul and backhaul installation and verification Synchronous Ethernet testing up to 10 Gbps (ITU-T G.826x, IEEE 1588 v2) TCP Throughput testing with RFC 6349 or iperf Powerful Storage Area Networking (SAN) testing Fibre Channel up to 10 Gbps Quick and easy testing of SDH/SONET and PDH/DSn networks SDH/SONET (STM-1 to 256/OC-3 to 768) PDH/DSn (E1, E3, E4, DS1, DS3) 1: Available for certified countries and regions including USA, Canada, Japan and EU countries. Please visit the Anritsu web site for updated information. The Bluetooth mark and logos are owned by Bluetooth SIG, Inc. and are used by Anritsu under license. Connector Panel Overview Power Supply Module Battery and AC Power Supply Module MU110001A AC only High Power Supply Module MU110002A Test Module (Select one or two modules) 10G Multirate Module MU110010A 100G Multirate Module MU110011A 40/100G Module CFP2 MU110012A 40/100G Advanced Module MU110013A Mainframe Network Master Flex MT1100A inch active TFT display and touch screen Power switch Speaker 1 Unit Sync. Input (for future use) 2 Unit Sync. Output (for future use) 3 Audio (3.5ø: CTIA Standard) 4 AUX (for G0325A, GPS receiver) 5 External Clock Input 6 USB Mini-B 7 USB A 8 USB A 9 Ethernet Service Interface 2

3 Measurement Modules Redefining Transport Testing 10G Multirate Module MU110010A Tx Reference Clock Output 2 Port1, Tx Mini-bantam (DS1) 3 Port1, Tx BNC (E1, E3, E4, DS3, STM-1e, STS-3) 4 Port1, Rx Mini-bantam (DS1) 5 Port1, Rx BNC (E1, E3, E4, DS3, STM-1e, STS-3) 6 Port2, Tx Mini-bantam (DS1) 7 Port2, Tx BNC (E1, E3, E4, DS3, STM-1e, STS-3) 8 Port2, Rx Mini-bantam (DS1) 9 Port2, Rx BNC (E1, E3, E4, DS3, STM-1e, STS-3) 10 Port1, Tx/Rx RJ48 (E1 balanced) 11 Port2, Tx/Rx RJ48 (E1 balanced) 12 Port1, Tx/Rx SFP/SFP+ (OTN, Ethernet, CPRI/OBSAI, Fibre Channel, SDH/SONET optical) 13 Port2, Tx/Rx SFP/SFP+ (OTN, Ethernet, CPRI/OBSAI, Fibre Channel, SDH/SONET optical) 14 Port1, Tx/Rx RJ45 (Ethernet electrical) 15 Port2, Tx/Rx RJ45 (Ethernet electrical) 100G Multirate Module MU110011A Port1, Tx/Rx RJ45 (Ethernet electrical) 17 Port2, Tx/Rx RJ45 (Ethernet electrical) 18 Tx Reference Clock Output 19 AUX Input (for future use) 20 Tx/Rx CFP (OTN, Ethernet, SDH/SONET optical) 21 Port1, Tx/Rx QSFP+ (OTN, Ethernet optical) 40/100G Module CFP2 MU110012A 22 Port2, Tx/Rx QSFP+ (OTN, Ethernet optical) 23 Port1, Tx/Rx SFP/SFP+ (OTN, Ethernet, CPRI/OBSAI, Fibre Channel, SDH/SONET optical) 24 Port2, Tx/Rx SFP/SFP+ (OTN, Ethernet, CPRI/OBSAI, Fibre Channel, SDH/SONET optical) 25 Act, Link Indicators Tx Reference Clock Output 27 AUX Input (for future use) 28 Port1, Tx/Rx CFP2 (OTN, Ethernet optical) 29 Port1, Tx/Rx CXP (Ethernet optical) 30 Port1, Tx/Rx QSFP+ (OTN Ethernet optical) 40/100G Advanced Module MU110013A 31 Port2, Tx/Rx CFP2 (OTN, Ethernet optical) 32 Port2, Tx/Rx CXP (Ethernet optical) 33 Port2, Tx/Rx QSFP+ (OTN Ethernet optical) 34 Act, Link Indicators Port1, CFP2 Sync. Clock Output 36 Port2, CFP2 Sync. Clock Output 37 Tx Reference Clock Output 38 AUX Input (for future use) 39 Port1, Tx/Rx CFP2 (OTN, Ethernet optical) 40 Port1, Tx/Rx CXP (Ethernet optical) Port1, Tx/Rx QSFP+ (OTN Ethernet optical) 42 Port2, Tx/Rx CFP2 (OTN, Ethernet optical) 43 Port2, Tx/Rx CXP (Ethernet optical) 44 Port2, Tx/Rx QSFP+ (OTN Ethernet optical) 45 Act, Link Indicators 3

4 Configuration Guide Mainframe and Modules Product Number Product Name Description MT1100A Network Master Flex Network Master Flex Mainframe MU110001A Battery and AC Power Supply Module Power supply module for MT1100A Includes G0237A 2 (Battery), Z1862A (Hexagon wrench) MU110002A AC only High Power Supply Module High power supply module for MT1100A Includes Z1862A (Hexagon wrench) MU110010A 10G Multirate Module SFP/SFP+: 2, RJ45: 2, BNC (Tx/Rx): 2, RJ48: 2, Mini-bantam (Tx/Rx): 2 MU110011A 100G Multirate Module CFP: 1, QSFP+: 2, SFP/SFP+: 2, RJ45: 2 MU110012A 40/100G Module CFP2 CFP2: 2, CXP: 2, QSFP+: 2, CFP4: 2 (with J1665A), QSFP28: 2 (with J1686B) MU110013A 40/100G Advanced Module CFP2: 2, CXP: 2, QSFP+: 2, CFP4: 2 (with J1665A), QSFP28: 2 (with J1686B) Power Supply Module Test Modules Mainframe MU110001A or MU110002A One or two modules in MU110010A/11A/12A/13A MT1100A One mainframe, one or two test modules and one power supply module can be combined flexibly for various applications. AC inlet Li-ion batteries (For MU110001A) MT1100A + MU110001A + MU110011A Overview Power Supply Modules and Test Modules Combination Battery and AC Power Supply Module MU110001A Module 1 Module 2 No Module MU110010A MU110011A MU110012A MU110013A MU110010A MU110011A MU110012A MU110013A AC only High Power Supply Module MU110002A Module 1 Module 2 No Module MU110010A MU110011A MU110012A MU110013A MU110010A MU110011A MU110012A MU110013A : Available : Not Available Test Modules and Maximum Operating Ports Protocol PDH/DSn OTU1 100 Mbps to 1 Gbps Ethernet STM-16/OC-48 1GFC to 4GFC OTU2/1e/ 2e/1f/2f 10 Gbps Ethernet STM-64/OC-192 8GFC to 10GFC OBSAI1 X to 4 X CPRI Option 1 to 8 OTU3/3e1/3e2 40 Gbps Ethernet STM-256/OC-768 OTU4 100 Gbps Ethernet 4 MU110010A 2 ports 2 ports 2 ports MU110011A 2 ports 2 ports 2 ports 1 1 port MU110012A 2 ports 2 2 ports MU110013A 2 ports 2 2 ports 1: Up to two ports in two QSFP+ and one CFP can be operated simultaneously. 2: MU110012A/13A does not have a STM-256/OC-768 physical interface. MU110012A/13A-083/084 are the options for STM-256/OC-768 client signals mapped in the OTN. Please refer to page 7.

5 OTN Mappings Support the mappings of OTU1 and OTU2x in MU110010A ODTU2.ts ODU/ OPU Flex FC-400 FC-800 CPRI Opt. 7/6 OTU2 Extended ODU/OPU2 ODU/OPU2 ODTU12 (PT=20) GFP-F GFP-F CPRI Opt. 5/4 MAC/IP 10GbE STM-64/OC-192 OTU1 ODTU12 (PT=21) ODTU2.1 ODU/OPU1 ODTU01 (PT=20) ODU/OPU0 GFP-T STM-16/OC-48 FC-200 CPRI Opt. 3 GigE STM-4/STM-1 /OC-12/OC-3 FC-100 CPRI Opt. 2/1 OTU2e/1e ODU/OPU 2e/1e 10 GigE OTU2f/1f ODU/OPU 2f/1f FC-1200 MU110010A-001 Up to 2.7G Dual Port MU110010A-051/052 OTN 10G Single/Dual Channel MU110010A-061 ODU Multiplexing MU110010A-062 ODU Flex MU110010A-011/012 Ethernet 10G Single/Dual Channel MU110010A-081/082 STM-64 OC-192 Single/Dual Channel MU110010A-002 1G 2G 4GFC Dual Port MU110010A-091/092 FC 8G 10G Single/Dual Channel MU110010A-071 CPRI/OBSAI Up to 5G Dual channel MU110010A-072/073 CPRI/OBSAI 6G to 10G Single/Dual channel Support the mappings of OTU1 and OTU2x in MU110011A ODTU2.ts ODU/ OPU Flex FC-400/FC-800 OTU2 Extended ODU/OPU2 ODU/OPU2 ODTU12 (PT=20) GFP-F GFP-F CPRI Opt. 7/6/5/4 MAC/IP 10GbE STM-64/OC-192 OTU1 ODTU12 (PT=21) ODTU2.1 ODU/OPU1 ODTU01 (PT=20) ODU/OPU0 GFP-T STM-16/OC-48 FC-200 CPRI Opt. 3 GigE STM-4/STM-1 /OC-12/OC-3 FC-100 CPRI Opt. 2/1 OTU2e/1e ODU/OPU 2e/1e 10 GigE OTU2f/1f ODU/OPU 2f/1f FC-1200 MU110011A-003/001 Up to 10G Single/Dual Channel MU110011A-061/063 ODU Multiplexing/40/100G ODU Multistage MU110010A-062 ODU Flex MU110011A-005/004 Up to 10G FC Single/Dual channel MU110011A-071/072 CPRI /OBSAI Up to 10G Single/Dual Channel 5

6 OTN Mappings Support the mappings of OTU3 in MU110011A/12A/13A ODTU3.ts ODU/ OPU Flex FC-400/FC-800 CPRI Opt. 7/6/5/4 GFP-F MAC/IP OTU3 ODU/ OPU3 STM-256/OC-768 TC 40 GigE ODTU2.ts ODU/ OPU Flex FC-400/FC-800 CPRI Opt. 7/6/5/4 ODTU23 (PT=20) ODTU23 (PT=21) ODTU13 (PT=20) Extended ODU/OPU2 ODU/OPU2 ODTU12 (PT=20) ODTU12 (PT=21) ODU/OPU1 GFP-F GFP-F MAC/IP 10GbE STM-64/OC-192 ODTU23 (PT=21) ODTU01 STM-16/OC-48 FC-200 ODTU2.1 CPRI Opt. 3 ODTU3.1 ODU/OPU0 GFP-T GigE STM-4/STM-1 /OC-12/OC-3 FC-100 OTU3e1 OTU3e2 ODU/OPU 3e1 ODU/OPU 3e2 ODTU 2e3e1 ODTU 3e2.8 Not supported mappings on 2 port mode MU110011A/12A/13A-053/054 OTN 40 Gig Single/Dual Channel MU110011A/12A-061 ODU Multiplexing MU110011A/12A/13A /100G ODU Multistage MU110011A/12A/13A-062 ODU Flex MU110011A/12A/13A /100G ODU Multistage MU110011A/12A/13A-003/001 Up to 10G Single/Dual Channel ODU/OPU 2e ODU/OPU 2e CPRI Opt. 2/1 10 GigE 10 GigE MU110011A/12A/13A-005/004 Up to 10G FC Single/Dual channel MU110011A-071/072 CPRI/OBSAI Up to 10G Single/Dual Channel MU110012A/13A-071/072 CPRI Up to 10G Single/Dual Channel MU110011A/12A/13A-013/014 Ethernet 40G Single/Dual Channel MU110011A/12A/13A-083/084 STM-256 OC-768 Single/Dual Channel 6

7 OTN Mappings Support the mappings of OTU4 in MU110011A/12A/13A ODTU4.ts ODU/ OPU Flex FC-400/FC-800 CPRI Opt. 7/6/5/4 GFP-F MAC/IP MPLS IP OTU4 ODU/ OPU4 100 GigE ODTU4.31 ODU/OPU3 STM-256/OC-768 TC 40 GigE ODTU4.8 ODU/OPU2e TC FC-1200 Extended ODU/OPU2 GFP-F 10 GbE ODTU2.ts ODU/ OPU Flex FC-400/FC-800 CPRI Opt. 7/6/5/4 GFP-F MAC/IP ODU/OPU2 ODTU4.2 ODTU12 (PT=20) ODTU12 (PT=21) ODU/OPU1 STM-64/OC-192 STM-16/OC-48 FC-200 ODTU4.1 ODTU2.1 ODTU01 ODU/OPU0 CPRI Opt. 3 GFP-T GigE STM-4/STM-1 /OC-12/OC-3 Supported at one port usage MU110011A/12A/13A-055/056 OTN 100G Single/Dual Channel MU110011A/12A-061 ODU Multiplexing MU110011A/12A/13A /100G ODU Multistage MU110011A/12A/13A-062 ODU Flex MU110011A/12A/13A /100G ODU Multistage MU110011A/12A/13A-003/001 Up to 10G Single/Dual Channel FC-100 CPRI Opt. 2/1 MU110011A/12A/13A-005/004 Up to 10G FC Single/Dual Channel MU110011A-071/072 CPRI/OBSAI Up to 10G Single/Dual Channel MU110012A/13A-071/072 CPRI Up to 10G Single/Dual Channel MU110011A/12A/13A-015/016 Ethernet 100G Single/Dual Channel MU110011A/12A/13A-013/014 Ethernet 40G Single/Dual Channel MU110011A/12A/13A-083/084 STM-256 OC-768 Single/Dual Channel SDH/SONET Mappings STM-256 OC-768 AUG-256 VC4-256c STS-768c C-4-256c STS-768cSPE Bulk STM-64 OC-192 AUG-64 VC4-64c STS-192c C-4-64c STS-192cSPE Bulk STM-16 OC-48 AUG-16 VC4-16c STS-48c C-4-16c STS-48cSPE Bulk STM-4 OC-12 AUG-4 VC4-4c STS-12c C-4-4c STS-12cSPE Bulk Bulk STM-1 OC-3 AUG-1 VC4 STS-3c C-4 STS-3cSPE E4 TUG-3 VC-3 Bulk E3 MU110010A-081/082 STM-64 OC-192 Single/Dual Channel MU110011A-083/084 STM-256 OC-768 Single/Dual Channel VC-3 STS-1 C-3 STS-1SPE DS3 Bulk TUG-2 VTG VC-12 VT2 C-12 VT2SPE E1 Bulk VC-11 VT1.5 C-11 VT1.5SPE DS1 7

8 Optical Transceivers Specification Model/Order No. G0332A 100M FX 1310 nm MM SFP G0329A 10G LR 1310 nm SFP+ G0315A 10G LR/LW 1310 nm SFP+ G0316A 10G ER/EW 1550 nm 40 km SFP+ G0318A 10G ZR/ZW 1550 nm 80 km SFP+ G0319A Up to 2.7G 1310 nm 15 km SFP G0320A Up to 2.7G 1310 nm 40 km SFP G0321A Up to 2.7G 1550 nm 80 km SFP G0328A 1G/2G/4G FC 850 nm SFP G0322A 1G/2G/4G FC 1310 nm SFP G0323A 1G/2G/4G FC 1550 nm SFP G0356A 8G FC/10G SR 850 nm SFP+ G0334A 40G LR nm QSFP+ G0335A 40G LR nm CFP G0336A 40G FR 1550 nm CFP G0337A 100G LR nm CFP G0338A 100G LR nm CFP2 G0339A 100G 850 nm CXP G0366A 100G BASE-SR4 QSFP28 G0364A 100G BASE-LR4 QSFP28 Description (Approx. Distance) 100BASE - FX 1310 nm multi mode (2 km) 10GBASE - LR 1310 nm single mode (10 km) 10GBASE - LR 1310 nm single mode (10 km) 10GBASE - ER 1550 nm single mode (40 km) 10GBASE - ER 1550 nm single mode (80 km) STM-1/4/16 short haul 1310 nm single mode (15 km) STM-1/4/16 long haul 1310 nm single mode (40 km) STM-1/4/16 long haul 1550 nm single mode (80 km) 1GFC, 2GFC, 4GFC 850 nm multi mode (0.5 km) 1GFC, 2GFC, 4GFC 1310 nm single mode (10 km) 1GFC, 2GFC, 4GFC 1550 nm single mode (40 km) 8GFC, 10GFC, 10GBASE - SR 850 nm multi mode (0.3 km) 40G Ethernet/OTN 1310 nm single mode (10 km) 40G Ethernet/OTN 1310 nm single mode (10 km) 40G SDH/OTN 1550 nm single mode (2 km) 100G Ethernet/OTN 1310 nm single mode (10 km) 100G Ethernet/OTN 1310 nm single mode (10 km) 100G Ethernet 850 nm multi mode (0.1 km) 100G Ethernet 850 nm multi mode (0.1 km) 100G Ethernet 1310 nm single mode (10 km) Max. Input Power Input Sensitivity Input Wavelength Output Power Output Wavelength 14 dbm 31 dbm 1270 nm to 1600 nm 20 to 15 dbm 1280 nm to 1380 nm OK +0.5 dbm 14 dbm 1260 nm to 1355 nm 8.2 to +0.5 dbm 1260 nm to 1355 nm OK +0.5 dbm 14.4 dbm 1260 nm to 1565 nm 6 to 1 dbm 1290 nm to 1330 nm OK 1 dbm 15.8 dbm 1260 nm to 1565 nm 3 to +3 dbm 1530 nm to 1560 nm 8 dbm 22 dbm 1260 nm to 1565 nm 0 to +5 dbm 1525 nm to 1565 nm 0 dbm 18 dbm 1270 nm to 1580 nm 5 to 0 dbm 1260 nm to 1360 nm OK 9 dbm 27 dbm 1270 nm to 1580 nm 2 to +3 dbm 1280 nm to 1335 nm 9 dbm 28 dbm 1270 nm to 1580 nm 2 to +3 dbm 1500 nm to 1580 nm 3 dbm 15 dbm 830 nm to 860 nm 9 to 0 dbm 830 nm to 860 nm 3 dbm 18 dbm 1260 nm to 1360 nm 8 to 0 dbm 1260 nm to 1360 nm 3 dbm 18 dbm 1470 nm to 1600 nm 0 to +5 dbm 1510 nm to 1590 nm 1 dbm 11.1 dbm 840 nm to 860 nm 7.3 to 1.0 dbm 840 nm to 860 nm OK +2.3 dbm +2.3 dbm +3 dbm +4.5 dbm +4.5 dbm +2.4 dbm +2.4 dbm +4.5 dbm 11.5 dbm 11.1 dbm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm +8.3 dbm (max.) (Total) 2 to +2.3 dbm +8.3 dbm (max.) (Total) 2 to +2.3 dbm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm Loop Back >4 db ATT >13 db ATT >12 db ATT >12 db ATT 6 dbm 1530 nm to 1565 nm 0 to +3 dbm 1530 nm to 1565 nm OK 10.3 dbm 10.3 dbm 9.5 dbm 9.9 dbm 8.6 dbm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm 840 nm to 860 nm 840 nm to 860 nm nm to nm nm to nm nm to nm nm to nm +8.9 dbm (max.) (Total) 2.9 to +2.9 dbm +8.9 dbm (max.) (Total) 2.9 to +2.9 dbm +8.9 dbm (max.) (Total) 7.6 to +2.4 dbm +8.9 dbm (max.) (Total) 9.1 to +2.4 dbm dbm (max.) (Total) 4.3 to +4.5 dbm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm nm to nm >3 db ATT >3 db ATT >8 db ATT OK OK OK OK 840 nm to 860 nm OK 840 nm to 860 nm OK nm to nm nm to nm nm to nm nm to nm OK 8

9 Optical Transceivers Interface List MU110010A MU110011A MU110012A MU110013A Model/ Order No. Name Form Factor 100 Meg Ethernet 156 Meg STM Meg CPRI 622 Meg STM Meg OBSAI 1 Gig FC 1.23 Gig CPRI 1.25 Gig Ethernet 1.54 Gig OBSAI 2 Gig FC 2.46 Gig CPRI Gig STM Gig OTU Gig CPRI OBSAI 4 Gig FC 4.92 Gig CPRI 6.14 Gig CPRI OBSAI 8 Gig FC 9.83 Gig CPRI 9.95 Gig STM Gig CPRI 10.3 Gig Ethernet 10.5 Gig FC 10.7 Gig OTU Gig OTU1e Gig OTU2e Gig OTU1f 11.3 Gig OTU2f 40G SDH/SONET 40G Ethernet 40G OTN 100G Ethernet 100G OTN G0332A G0329A G0315A G0316A G0318A G0319A G0320A G0321A G0328A G0322A G0323A G0356A G0334A G0335A G0336A G0337A G0338A 100M FX 1310 nm MM SFP 10G LR 1310 nm SFP+ 10G LR/LW 1310 nm SFP+ 10G ER/EW 1550 nm 40 km SFP+ 10G ZR/ZW 1550 nm 80 km SFP+ Up to 2.7G 1310 nm 15 km SFP Up to 2.7G 1310 nm 40 km SFP Up to 2.7G 1550 nm 80 km SFP 1G/2G/4G FC 850 nm SFP 1G/2G/4G FC 1310 nm SFP 1G/2G/4G FC 1550 nm SFP 8G FC/10G SR 850 nm SFP+ 40G LR nm QSFP+ 40G LR nm CFP 40G FR 1550 nm CFP 100G LR nm CFP 100G LR nm CFP2 SFP SFP+ SFP+ SFP+ SFP+ SFP SFP SFP SFP SFP SFP SFP+ QSFP+ CFP CFP CFP CFP nm, MM, 2 km 1310 nm, SM, 15 km 1310 nm, SM, 40 km 1550 nm, SM, 80 km 850 nm, MM, 0.5 km 1310 nm, SM, 10 km 1550 nm, SM, 40 km 850 nm, MM, 0.3 km 1310 nm, SM, 10 km 1310 nm, SM, 10 km 1550 nm, SM, 40 km 1550 nm, SM, 80 km 1310 nm, SM, 10 km 1310 nm, SM, 10 km 1550 nm, SM, 2 km 1310 nm, SM, 10 km 1310 nm, SM, 10 km G0339A 100G 850 nm CXP CXP 850 nm, MM, 0.1 km G0366A 100G BASE-SR4 QSFP28 QSFP nm, MM, 0.1 km G0364A 100G BASE-LR4 QSFP28 QSFP nm, SM, 10 km 9

10 Mainframe/Power Modules Specifications Network Master Flex MT1100A Mainframe User Interfaces Display Supported Languages 12.1-inch active matrix TFT display ( pixels) and touch screen English, Chinese, Japanese, French, Russian, Spanish Service Interfaces USB Interface Ethernet Interface WLAN Interface Bluetooth Interface MT1100A operates as host: USB 2.0 type A (2 ports) MT1100A operates as device: USB 2.0 type Mini-B (1 port) Ethernet 10M/100M/1000M, Connector: RJ45 IEEE b/g/n Bluetooth EDR : Available for certified countries and regions including USA, Canada, Japan and EU countries. Please visit the Anritsu web site for updated information. Other Interfaces Unit synchronization Input Unit Synchronization Output Audio Interface AUX Connector Built-in Loudspeaker Ext. Clock Input (Not used) (Not used) For connection of CTIA Standard head set Connector: 3.5-mm diameter jack For connection of G0325A GPS receiver Monitors speech of voice channel Output level: user-controlled from user Interface For connection of external clock signals: SETS (E1: Mbps), BITS (DS1: Mbps),or MHz TTL signal in accordance with ITU-T G.703, 10 MHz Connector: BNC Miscellaneous Dimensions and Mass Environmental EMC LVD 320 (W) 225 (H) 46 (D) mm (excluding projections), 2.5 kg Temperature and Humidity Operating: 0 to +40 C, 80% RH (non-condensing) Storage: 20 to +60 C, 80% RH (non-condensing) EN , EN EN Battery and AC Power Supply Module MU110001A Battery Power Supply Dimensions and Mass Environmental Module Combination EMC LVD 14.4 V rechargeable and replaceable intelligent Li-ion battery Operation time: 1 hour (typ.) (with MU110011A, 100 Gbps Ethernet operation) Charging time: 6 hours (typ.) (25 C) Remaining capacity indication:% 100 V(ac) to 240 V(ac), 50 Hz/60 Hz 380 VA (max.) 320 (W) 225 (H) 82 (D) mm (excluding projections), 3.0 kg (without battery) Temperature and Humidity Operating: 0 to +40 C, 80% RH (non-condensing) Storage: 20 to +60 C, 80% RH (non-condensing, without battery) 20 to +50 C, 80% RH (non-condensing, with battery) 1 module: Un limited 2 modules: MU110010A + MU110010A MU110010A + MU110011A MU110010A + MU110012A MU110010A + MU110013A EN , EN EN AC only High Power Supply Module MU110002A 10 Power Supply Dimensions and Mass Environmental EMC LVD 100 V(ac) to 240 V(ac), 50 Hz/60 Hz 700 VA (max.) 320 (W) 225 (H) 72 (D) mm (excluding projections), 3.0 kg Temperature and Humidity Operating: 0 to +40 C, 80% RH (non-condensing) Storage: 20 to +60 C, 80% RH (non-condensing) EN , EN EN

11 Measurement Modules Specifications 10G Multirate Module MU110010A Test Port/Reference Standard SFP/SFP+: 2 ports SFF-8431, SFF-8472 compliant, IEEE 802.3ae-2002, IEEE compliant RJ45: 2 ports IEEE BASE-T, 100BASE-TX, 1000BASE-T compliant Auto MDI-X 10 Mbps/100 Mbps full/half duplex, 1000 Mbps full duplex BNC: 2 ports ITU-T G.703 compliant RJ48: 2 ports ITU-T G.703 compliant RTT Bantam: 2 ports ANSI DS1.102 compliant Bit Rate Standard Bit Rate Interfaces 10BASE-T 12.5 Mbps RJ45 100BASE-TX 125 Mbps RJ BASE-T 1.25 Gbps RJ45 100BASE-XX 125 Mbps SFP 1000BASE-XX 1.25 Gbps SFP 10GBASE-XX Gbps SFP+ STM-1/OC Mbps SFP STM-4/OC Mbps SFP STM-16/OC Gbps SFP STM-64/OC Gbps SFP+ OTU Gbps SFP OTU Gbps SFP+ OTU1e Gbps SFP+ OTU2e Gbps SFP+ OTU1f Gbps SFP+ OTU2f Gbps SFP+ 1GFC Gbps SFP 2GFC Gbps SFP 4GFC 4.25 Gbps SFP 8GFC 8.5 Gbps SFP+ 10GFC Gbps SFP+ Standard Bit Rate Interfaces E Mbps RJ48, BNC E Mbps BNC E Mbps BNC DS Mbps RTT Bantam DS Mbps BNC STM-1e/STS Mbps BNC CPRI Mbit/s SFP CPRI2 1,228.8 Mbit/s SFP CPRI3 2,457.6 Mbit/s SFP, SFP+ CPRI4 3,072.0 Mbit/s SFP, SFP+ CPRI5 4,915.2 Mbit/s SFP+ CPRI6 6,144.0 Mbit/s SFP+ CPRI7 9,830.4 Mbit/s SFP+ CPRI8 10,137.6 Mbit/s SFP+ OBSAI 1x 768 Mbit/s SFP OBSAI 2x 1,536 Mbit/s SFP, SFP+ OBSAI 4x 3,072 Mbit/s SFP, SFP+ OBSAI 8x 6,144 Mbit/s SFP+ Tx Ref. Clock Output Frequency : Selectable from 1/16, or 1/64 against the bit rate. (Available only when one of SFP ports is selected) Level : 250 mvp-p (min.), 550 mvp-p (max.) Termination : 50Ω/AC (Single ended) Connector : SMA Dimensions and Mass 320 (W) 225 (H) 37 (D) mm, 1.4 kg Environmental Temperature and Humidity Operating : 0 to +40 C, 80% RH (non-condensing) Storage : 20 to +60 C, 80% RH (non-condensing) EMC EN , EN LVD EN Laser Safety 3 IEC : 2007 CLASS 1 21CFR and : The frequency accuracy depends on the accuracy of the MT1100A internal clock or the external clock of MT1100A. Refer to the external interfaces in MT1100A specifications. 2: Excludes deviations caused by conformance to Laser Notice No. 50 dated June 24, : Safety measures for laser products This product complies with optical safety standards in 21CFR , and IEC ; the following descriptive labels are affixed to the product. 11

12 Measurement Modules Specifications 100G Multirate Module MU110011A Test Port/Reference Standard CFP: 1 port CFP MSA Hardware Specification, Rev. 1.4 compliant CFP MSA Management Interface Specification V2.2 R06a compliant (Not supported to MSA 100GLH) IEEE 802.3ba-2010 compliant QSFP+: 2 ports SFF-8436, SFF-8472 compliant IEEE 802.3ba-2010 compliant SFP/SFP+: 2 ports SFF-8431, SFF-8472 compliant IEEE 802.3ae-2002, IEEE compliant RJ45: 2 ports IEEE BASE-T, 100BASE-TX, 1000BASE-T compliant Auto MDI-X 10 Mbps/100 Mbps full/half duplex, 1000 Mbps full duplex Bit Rate 1 Standard Bit Rate Interfaces 10BASE-T 12.5 Mbps RJ45 100BASE-TX Mbps RJ BASE-T 1.25 Gbps RJ45 100BASE-XX Mbps SFP 1000BASE-XX 1.25 Gbps SFP 10GBASE-XX Gbps SFP+ 40 GigE Gbps 4 Lane CFP, QSFP+ 40GBASE-FR Gbps CFP 100 GigE Gbps 10 Lane CFP STM-1/OC Mbps SFP STM-4/OC Mbps SFP STM-16/OC Gbps SFP STM-64/OC Gbps SFP+ STM-256/OC Gbps 4 Lane CFP FR model Gbps CFP OTU Gbps SFP OTU Gbps SFP+ OTU1e Gbps SFP+ OTU2e Gbps SFP+ OTU1f Gbps SFP+ OTU2f Gbps SFP+ OTU Gbps 4 Lane CFP, QSFP+ FR model Gbps CFP Standard Bit Rate Interfaces OTU3e Gbps 4 Lane CFP, QSFP+ FR model Gbps CFP OTU3e Gbps 4 Lane CFP, QSFP+ FR model Gbps CFP OTU Gbps 10 Lane CFP 1GFC Gbps SFP 2GFC Gbps SFP 4GFC 4.25 Gbps SFP 8GFC 8.5 Gbps SFP+ 10GFC Gbps SFP+ CPRI Mbps SFP CPRI2 1,228.8 Mbps SFP CPRI3 2,457.6 Mbps SFP, SFP+ CPRI4 3,072.0 Mbps SFP, SFP+ CPRI5 4,915.2 Mbps SFP+ CPRI6 6,144.0 Mbps SFP+ CPRI7 9,830.4 Mbps SFP+ CPRI8 10,137.6 Mbps SFP+ OBSAI 1x 768 Mbps SFP OBSAI 2x 1,536 Mbps SFP, SFP+ OBSAI 4x 3,072 Mbps SFP, SFP+ OBSAI 8x 6,144 Mbps SFP+ Tx Ref. Clock Output Frequency: Select 1/16 or 1/64 for bit rates of 10G or less. Select 1/16 or 1/64 for each lane rate for XLAUI and OTL3.4 of 40G. Select 1/16 or 1/64 for each lane rate for CAUI and OTL4.19 of 100G. (RJ45 port cannot be selected) Level: 250 mvp-p (min.), 550 mvp-p (max.) Termination: 50Ω/AC (Single ended) Connector: SMA Dimensions and Mass 320 (W) 225 (H) 60 (D) mm, 3.0 kg Environmental Temperature and Humidity Operating : 0 to +40 C, 80% RH (non-condensing) Storage : 20 to +60 C, 80% RH (non-condensing) EMC EN , EN LVD EN Laser Safety 3 IEC : 2007 CLASS 1 21CFR and CFP : 100GBASE-LR4, 40GBASE-LR4, 40GBASE-FR QSFP+ : 40GBASE-LR4 SFP : 4GFC(SX), 4GFC(LX), 4GFC(EX), OC-48 LR-1/STM L-16.1, OC-48 LR-2/STM L-16.2, 100BASE-FX, 100BASE-LX SFP+ : 1000BASE-SX/LX/ZX, 10GBASE-LR, 10GBASE-ER, 10GBASE-ZR IEC : 2007 CLASS 1M 21CFR and CFP : 100G BASE-SR10 QSFP+ : 40GBASE-SR4 1: The frequency accuracy depends on the accuracy of the MT1100A internal clock or the external clock of MT1100A. Refer to the external interfaces in MT1100A specifications. 2: Excludes deviations caused by conformance to Laser Notice No. 50 dated June 24, : Safety measures for laser products This product complies with optical safety standards in 21CFR , and IEC ; the following descriptive labels are affixed to the product. 12

13 Measurement Modules Specifications 40/100G Module CFP2 MU110012A Test Port/Reference Standard CFP2: 2 ports CFP MSA CFP2 Hardware Specification, Rev. 1.0 compliant CFP MSA Management Interface Specification V2.2 R06a compliant (Not supported to MSA 100GLH) IEEE 802.3ba-2010 compliant CXP: 2 ports InfiniBand Architecture Annex A6: CXP compliant SFF-8642, IEEE 802.3ba-2010 compliant QSFP+: 2 ports SFF-8436, SFF-8472 compliant IEEE 802.3ba-2010 compliant Bit Rate 1 Standard Bit Rate Interfaces 40 GigE Gbps 4 Lane QSFP+ 100 GigE Gbps 10 Lane CXP 100 GigE Gbps 4 Lane CFP2 OTU Gbps 4 Lane QSFP+ OTU3e Gbps 4 Lane QSFP+ OTU3e Gbps 4 Lane QSFP+ OTU Gbps 4 Lane CFP2 Tx Ref. Clock Output Frequency Select 1/16 or 1/64 for each lane rate of XX. 40 GigE : XLAUI OTU3, OTU3e1, OTU3e2 : OTL GigE : CAUI OTU4 : OTL4.10 Level: 250 mvp-p (min.), 550 mvp-p (max.) Termination: 50Ω/AC (Single ended) Connector: SMA Dimensions and Mass 320 (W) 225 (H) 60 (D) mm, 3.0 kg Environmental Temperature and Humidity Operating : 0 to +40 C, 80% RH (non-condensing) Storage : 20 to +60 C, 80% RH (non-condensing) EMC EN , EN LVD EN Laser Safety 3 IEC : 2007 CLASS 1 21CFR and QSFP+ : 40G BASE-LR4 CFP2 : 100G BASE-LR4 CFP4 : 100G BASE-LR4 QSFP28 : 100G BASE-LR4 IEC : 2007 CLASS 1M 21CFR and QSFP+ : 40G BASE-SR4 CXP : 100G BASE-SR10 QSFP28 : 100G BASE-SR4 1: The frequency accuracy depends on the accuracy of the MT1100A internal clock or the external clock of MT1100A. Refer to the external interfaces in MT1100A specifications. 2: Excludes deviations caused by conformance to Laser Notice No. 50 dated June 24, : Safety measures for laser products This product complies with optical safety standards in 21CFR , and IEC ; the following descriptive labels are affixed to the product. 13

14 Measurement Modules Specifications 40/100G Advanced Module MU110013A Test Port/Reference Standard CFP2: 2 ports CFP MSA CFP2 Hardware Specification, Rev. 1.0 compliant CFP MSA Management Interface Specification V2.2 R06a compliant (Not supported to MSA 100GLH) IEEE 802.3ba-2010 compliant CXP: 2 ports InfiniBand Architecture Annex A6: CXP compliant SFF-8642, IEEE 802.3ba-2010 compliant QSFP+: 2 ports SFF-8436, SFF-8472 compliant IEEE 802.3ba-2010 compliant Bit Rate 1 Standard Bit Rate Interfaces 40 GigE Gbps 4 Lane QSFP+ 100 GigE Gbps 10 Lane CXP 100 GigE Gbps 4 Lane CFP2, CFP4 2, QSFP28 2 OTU Gbps 4 Lane QSFP+ OTU3e Gbps 4 Lane QSFP+ OTU3e Gbps 4 Lane QSFP+ OTU Gbps 4 Lane CFP2, CFP4 2, QSFP28 2 Tx Ref. Clock Output Frequency Select 1/16 or 1/64 for each lane rate of XX. 40 GigE : XLAUI OTU3, OTU3e1, OTU3e2 : OTL GigE : CAUI OTU4 : OTL4.10 Level: 250 mvp-p (min.), 550 mvp-p (max.) Termination: 50Ω/AC (Single ended) Connector: SMA Sync Clock Output Frequency Select 1/8 or 1/16 against the bit rate of the data lane for CFP2 port. 100 GigE : CAUI4 OTU4 : OTL 4.4 Level: 150 mvp-p (min.), 650 mvp-p (max.) Termination: 50Ω/AC (Single ended) Connector: SMA Dimensions and Mass 320 (W) 225 (H) 60 (D) mm, 3.0 kg Environmental Temperature and Humidity Operating : 0 to +40 C, 80% RH (non-condensing) Storage : 20 to +60 C, 80% RH (non-condensing) EMC EN , EN LVD EN Laser Safety 4 IEC : 2007 CLASS 1 21CFR and QSFP+ : 40G BASE-LR4 CFP2 : 100G BASE-LR4 CFP4 : 100G BASE-LR4 QSFP28 : 100G BASE-LR4 IEC : 2007 CLASS 1M 21CFR and QSFP+ : 40G BASE-SR4 CXP : 100G BASE-SR10 QSFP28 : 100G BASE-SR4 1: The frequency accuracy depends on the accuracy of the MT1100A internal clock or the external clock of MT1100A. Refer to the external interfaces in MT1100A specifications. 2: Required for an interface converter. 3: Excludes deviations caused by conformance to Laser Notice No. 50 dated June 24, : Safety measures for laser products This product complies with optical safety standards in 21CFR , and IEC ; the following descriptive labels are affixed to the product. 14

15 OTN Testing Specifications OTN Testing OTN Test Framing Transmitter Clock Receive Signal Rate OTU4, OTU3, OTU3e1, OTU3e2, OTU2, OTU2e, OTU1e, OTU2f, OTU1f, OTU1 Internal clock accuracy: ±4.6 ppm, Clock offset: ±200 ppm (0.1 ppm steps) Received clock TTL level external 2 MHz clock SETS (E1: Mbps), BITS (DS1: Mbps) Signal from optional GPS receiver ±200 ppm Frequency deviation indication resolution: ±0.1 ppm Scrambling Complies with ITU-T G.709 OTN Mapping See page 5, 6 OTN Alarms Detected alarms OTU layer: OTU-AIS, LOF, OOF, LOM, OOM, SM-TIM, SM-BIAE, SM-BDI, SM-IAE ODU layer: LOS, ODU-AIS, ODU-OCI, ODU-LCK, PM-TIM, PM-BDI, FSF, FSD, BSF, BSD ODU multiplexing: ODU-LOFLOM, ODU-OOF, OOM, ODU-AIS, ODU-OCI, ODU-LCK, PM-TIM, PM-BDI, MSIM OPU layer: PLM, OPU-MSIM, Client-AIS, CSF, LSS TCM: TCMi-TIM, TCMi-BIAE, TCMi-BDI, TCMi-IAE, TCMi-LTC (i = 1 to 6) OTL: LOF, OOF, OOR, LOR, ILA/OLA (OTU4, OTU3, OTU3e1, OTU3e2) Generated alarms OTU layer: OTU-AIS, OTU-OOF/LOF, OOM/LOM, SM-TIM, SM-BIAE, SM-BDI, SM-IAE ODU layer: ODU-AIS, ODU-OCI, ODU-LCK, PM-TIM, PM-BDI, FSF, FSD, BSF, BSD ODU multiplexing: OOF/LOF, OOM/LOM, ODU-AIS, ODU-LCK, PM-TIM, PM-BDI, FSF, FSD, BSF, BSD OPU layer: Client-AIS, CSF TCM: TCMi-TIM, TCMi-BIAE, TCMi-IAE, TCMi-BDI, TCMi-LTC (i = 1 to 6) OTL: LOF, OOF, OOR, LOR (OTU4, OTU3, OTU3e1, OTU3e2) OTN Errors Detected errors OTU layer: FAS, MFAS, SM-BEI, SM-BIP8, FEC-Correctable, FEC-Uncorrectable ODU layer: PM-BIP8, PM-BEI OPU layer: Pattern error error: CRC8 error, CRC5 error GFP errors: chec corrected, chec uncorrectable, thec corrected, thec uncorrectable, CSF Signal, CSF Sync, Invalid GFP Frame, Superblock CRC, ehec corrected, ehec uncorrectable, FCS, CMF Sync, CMF Signal, SSF, PTI Missmatch, UPI Mismatch TCM: TCMi-BEI, TCMi-BIP-8 (i = 1 to 6) OTL: MFAS, LLM (OTU4, OTU3, OTU3e1, OTU3e2) Generated errors OTU layer: Bit all, FAS, OTU-FAS, MFAS, SM-BIP8, SM-BEI ODU layer: PM-BIP8, PM-BEI, ODU-FAS TCMi-BIP8, TCMi-BEI (i = 1 to 6) Pattern error OTL: MFAS, LLM (OTU4, OTU3, OTU3e1, OTU3e2) : CRC8, CRC5, Invalid JC1, Invalid JC2,Invalid JC1&JC2 GFP: chec, thec, Superblock CRC, ehec, FCS, CMF Inserted Error bits are editable. Error Performance G.8201/M.2401 analysis of received signal based on detected errors and alarms: BBE, BBER, SES, SESR, UNAV Justification Analysis Count : Positive (+1), Positive (+2), Negative ( 1), Offset (ppm) : CRC8 Error, CRC5 Error, Inc, Inc > 1, Inc > 2, Inc Over, Dec, Dec > 1, Dec > 2, Dec Over, Offset (ppm), Cm (t) Max., Cm (t) Min. BER Test Pattern Pattern generation and detection for bulk test patterns: Test patterns: PRBS 9, PRBS 11, PRBS 15, PRBS 20, PRBS 23, PRBS 29, PRBS 31, Null PRBS patterns can be inverted. User-defined patterns (Pattern length: 2048 bits, 32 bits) FEC Test ITU-T O.182 Random error insertion Overhead User-editable header bytes OTU layer: FAS, SM, GCC0, RES ODU layer: PM, FTFL, APS/PCC, GCC1, GCC2, RES, EXP, TCMi (i = 1 to 6) OPU layer(s): PSI Capture and display current overhead bytes The following signals are decoded: TTI (SM, PM, TCMi (i = 1 to 6) of high-order, FTFL, PT) OTL Skew OTU4, OTU3, OTU3e1, OTU3e2 Insertion Bits: 0 to (Tx lane) Detection Relative skew, Marker map Through Mode Transparent mode OH overwrite mode The OTU, ODU and OPU overhead can be changed. The FEC encoder and decoder can be set On/Off in any mode 15

16 OTN/Ethernet Testing Specifications OTN Results Status Statistics APS Round Trip Delay (Propagation Time) Measurement Tributary Scan Current information on: Alarms and errors on monitored line Input level indication for optical signals Frequency Frequency deviation User-defined measurement resolution: 1, 2, 5, 10, 15, 30 s, 1, 5, 10, 15, 30 min, 1, 2, 4, 6, 12 h Logged information: Alarms (s), Errors (count or count and ratio), Client Frequency, Deviation APS (Automatic Protection Switching) test and analysis APS switching time is measured. A switching time exceeding the user-defined threshold is highlighted. Start and stop triggers can be selected independently. Trigger events can be selected from the high-order OTU and ODU, Pattern bit error, LOS (Loss of Signal). Switching time, Switching count, Pass/Fail, Minimum, Maximum and Average can be displayed. APS switching time measurement resolution: 0.1 ms Resolution: 0.1 µs Measured Max. time: 10.0 s Interval: 0.5, 1, 2, 5, 10 s Supports up to 10 Gbps Detected alarms: OTU-AIS, LOF, OOF, LOM, OOM, SM-BIAE, SM-BDI, SM-IAE, ODU-AIS, ODU-OCI, ODU-LCK, PM-BDI, LOFLOM Ethernet Testing Ethernet Test Test Configuration Monitor/Generate, Pass-through, Reflector Encapsulation EtherType II (DIX v.2), IEEE with (LLC1), IEEE with SNAP 100 GigE FEC Interface : CFP2 slots FEC enable : On/Off FEC Code : RS (528, 514, 7, 10) FEC status & counter Loss of FEC alignment, Corrected CW, Uncorrectable CW, Corrected Symbol each lane FEC related Error Injection Bit error per CAUI4 lane encoded RS-FEC (Injection timing is Single/Burst.) Configuration, Monitor/Generate Traffic Generation Stacked VLAN Multistream Timing Functionality Receiver Setting Error Generation Alarm Generation PCS Skew Variable line rate traffic generation, up to full line rate Line load profile: Constant, Ramp Traffic duration: Continuous, Programmable number of seconds or frames Adjustable frame size: 60 bytes to bytes Frame sizes: Constant, Stepped, Random Payload profiles: Data, Video, Voice User-defined traffic mix of unicast and broadcast frames Fixed or incremented IP identifier User programmable DSCP/TOS byte Configurable IP and Ethernet source and destination addresses (supports IPv4 and IPv6 addressing) IPv4: Fixed, DHCP, DNS IPv6: Fixed Address increment, Decrement and Random generation supported User programmable UDP/TCP address Automatic TCP connect (user selectable) UDP check sum: Automatic, Fixed (null); TCP check sum: Automatic Generate pause frames, Respond to pause frames Answer incoming ARP, Ping requests (On/Off) Up to 8 user-settable VLAN tags Parameters per VLAN tag: Ether-type 0x8100 (802.1Q), 0x88a8 (802.1ad), 0x9100 or 0x9200 User-defined VLAN ID, CFI, VLAN priority Address increment, Decrement and Random generation supported Only one VLAN level supported at ping, traceroute and RFC 2544 router latency tests Number of streams: Up to 16 streams per port can be activated Timing sources (selectable): Internal, Received clock, 2-MHz signal, SETS (E1: Mbps), BITS (DS1: Mbps), PTP (IEEE 1588 v2) recovered clock or signal from optional GPS receiver Frequency deviation: ±200 ppm (0.1 ppm steps) The frequency deviation of received Ethernet signals can be measured against the internal clock. User-defined expected preamble length: 3 bytes to 15 bytes User-defined IFG lower threshold: 8 bytes to 15 bytes (Ethernet 10 Mbps, 100 Mbps, 1000 Mbps) User-defined Jumbo frame size upper limit: 1519 bytes to bytes FCS, Preamble, Error symbol, IFG for ethernet 10 Mbps, 100 Mbps, 1000 Mbps, Wrong IP check sum, Fragmented IP, Wrong layer 4 check sum, PRBS bit error, BER test sequence error 40 Gbps/100 Gbps: Invalid block type (0x00, 0x2d, 0x33, 0x66), Invalid sync. header (00, 11), Invalid alignment marker, BIP error No link, Remote fault, Local fault (10 Gbps) PCS 10 Gbps/40 Gbps/100 Gbps: High BER 40 Gbps, 100 Gbps Insertion 100 Gbps Tx lane: 0 to 4224 bits 40 Gbps, 100 Gbps physical lane: 0 to 8448 bits Detection Relative skew, Marker map 16

17 Ethernet Testing Specifications Result, Monitor/Generate Status Resolution Performance Statistics Frame Statistics Burst Statistics Frame Distribution Statistics Multistream Statistics Transmit Statistics Filter Adjustable Thresholds DHCP Link status, Interface type, Jabber detected, Frames present, MPLS/EoMPLS/VLAN, Speed, Full or half duplex, Local clock (Ethernet 1000 Mbps), LFS LF/RF (Ethernet 10 Gbps), Signal present, Bit rate of incoming Ethernet signal, Auto negotiation complete Link partner abilities: Pause capable and Asymmetric pause request (not Ethernet 10 Gbps), Remote fault, Speed/Duplex Indicators for Utilization, Throughput and Errored frames Signal level indication for optical Ethernet interfaces User-defined resolution for statistical measurements: 1, 2, 5, 10, 15, 30 s, 1, 5, 10, 15, 30 min, 1, 2, 4, 6, 12 h Event log: Major measurement events incl. errors and alarms are logged with 1-second resolution. Utilization (Max./Min./Avg.), Throughput (Max./Min./Avg.), Frame rate (Max./Min./Avg.) Total frames, Total valid frames, Unicast/Multicast/Broadcast frames, Number of pause frames Number of VLAN tagged frames, Max. number of VLAN layers detected, Last received VLAN ID, Last received VLAN priority Number of MPLS frames and MPLS-TP frames. Max. number of MPLS layers detected. Last received MPLS Label, MPLS Priority and MPLS TTL. Number of PBB frames. Last received B/I-tag ID and B/I-tag priority. Total errored frames, Fragmented frames, Number of oversized and undersized (runts) frames, Number of FCS errored frames, Error symbol frames (not Ethernet 10 Gbps)/Code violation frames (Ethernet 10 Gbps), Number of collisions (10 Mbps, 100 Mbps half duplex), Preamble violations, IFG violations (Ethernet 10 Mbps, 100 Mbps, 1000 Mbps), False carrier, 10G LFS LF (local fault), 10G LFS RF (remote fault) Total frames, Total valid frames, Number of burst, Total frames in bursts, Burst size (Max./Min./Avg.) Total valid/ frames, 64 to 127, 128 to 255, 256 to 511, 512 to 1023, 1024 to 1518 byte frames, Total number of jumbo frames Frame size (Max./Min./Avg.) Available information per stream: Frame loss count/rate, Throughput, Latency, Packet jitter, Frames and bytes received and transmitted Total frames, Total valid frames, Unicast/Multicast/Broadcast frames, FCS errors, Total errors 64 to 127, 128 to 255, 256 to 511, 512 to 1023, 1024 to 1518 byte frames, Total number of jumbo frames Total number of frames (Tx (own port) Rx (selectable port)) Up to 8 filter conditions can be defined. Each condition can filter using: IP or MAC source address, IP or MAC destination address, Broadcast address, IEEE OUI value, Encapsulation type, VLAN ID and VLAN tag priority, MPLS, PBB source and destination MAC address, PBB B/I-tag, MPLS-TP source and destination MAC address, TPC/UDP source and destination port, User-defined pattern at defined offset Utilization, Throughput, Errored frames, Collision rate, Unicast frames, Multicast frames, Broadcast frames, Pause frames, Fragmented frames, Undersized frames (runts), Oversized frames, FCS errored frames, IFG violations (Ethernet 10 Mbps, 100 Mbps, 1000 Mbps), Preamble violations, BER test pattern errors, Sequence errors, Diff.Tx-Rx Display source IP address assigned by DHCP Display current lease expire time Display IP addresses of primary and secondary DNS server when obtained by DHCP Gateway setup using DHCP BER Test and Service Disruption Measurement BER Test Generation and detection of test patterns, Count of errors in received test pattern, Pattern generation: Unframed (Layer 1), Framed Ethernet (MAC) header (Layer 2), Framed Ethernet (MAC) header with IP header (Layer 3) or Framed Ethernet (MAC) header, Framed with IP header and TCP/UDP header (Layer 4), User-defined header pattern (14 byte to 256 byte) Detection of sequence errors and loss of sequence synchronization Frame loss count and frame loss seconds Throughput measurement results are calculated for: Utilization layer, Physical layer, Physical layer excluding preamble, Link layer, Network layer and Data layer Min./Max./Avg. values Performance (M.2100 type) parameters: ES, SES, ALS, UAT, AVT, EFS Test patterns: PRBS 9, PRBS 11, PRBS 15, PRBS 20, PRBS 23, PRBS 29, PRBS 31, HF test pattern, CRPAT, JTPAT, SPAT, 55 Hex, Fox, 32-bit user programmable User-defined resolution: 1, 2, 5, 10, 15, 30 s, 1, 5, 10, 15, 30 min, 1, 2, 4, 6, 12 h Error Generation FCS, Preamble, Error symbol, IFG for Electrical Interface (10 Mbps, 100 Mbps, 1000 Mbps), Wrong IP check sum, Fragmented IP, Wrong layer 4 check sum, PRBS bit error, BER test sequence error Alarm Generation No link, Remote fault Service Disruption Measurement Service disruption measurement activated as part of BER test Max./Avg. service disruption time, Resolution: 0.1 µs Number of service disruptions Disruption Type: Packet, LOS RFC 2544 Test RFC 2544 Test Switch/Router test and Single ended network test modes: Throughput, Frame loss, Latency or Packet jitter, Back-to-back frames (burstability) End-to-end network test mode (two MT1100A units in Local-remote setup) Throughput, Frame loss, Back-to-back frames (burstability) Router latency test mode IP ping based latency test or packet jitter Service Activation Test (Y.1564) Service Activation Test Service Configuration Test ITU-T Y.1564 Service Activation Test Up to 8 services per port Color-aware and non-color-aware in combinations (IP DSCP or VLAN PCP) Test modes: One-way (uni- or bi-directional, symmetrical or asymmetrical), Round-trip Verification against service acceptance criteria: Information rate, Frame transfer delay, Frame delay variation, Frame loss rate, Availability Optional GPS timing synchronization Subtests for: Committed information rate, Excess information rate, Traffic policing, Committed burst size, Excess burst size Step duration: 1 s to 60 s (user programmable) Number of steps: 1 to 10 (user programmable) Slope: Rising/Falling Results: Pass/Fail indication, IR (Max./Min./Avg.), FL (Count/FLR), FTD, FDV (Max./Min./Avg./Current (during measurement)) 17

18 Ethernet Testing Specifications Service Performance Test All services tested simultaneously at CIR Duration 15 min, 2 h, 24 h, user programmable Results: Pass/Fail indication, IR (Max./Min./Avg.), FL (Count/FLR), FTD, FDV (Max./Min./Avg./Current (during measurement)), AVAIL (%), Unavail (s) RFC 6349 TCP Throughput Test TCP Throughput Test TCP Throughput Test According to RFC 6349 Supports connecting to iperf server Test Direction Setup Local Remote Remote Local Simultaneous in both directions For RFC 6349 test sequence, user can choose to measure for: Path MTU Baseline RTT Window Scan and Throughput Multi-Service Multi-Service: DSCP or TOS can be set to each TCP connections Measurement results include: Auto-calculation of Bandwidth Delay Product (BDP) Transmitted and Retransmitted Bytes TCP Transfer Time Ratio TCP Efficiency Retransmitted Percentage Buffer Delay Percentage Cable Test Cable Test Identifies cable faults like short circuits, or breaks in wire pair, and displays distance from instrument to fault Ping Test and Traceroute Ping Test Traceroute For Connectivity and Configuration check Round Trip Time (RTT) Supports IPv4 and IPv6 addressing Answer incoming ping requests (On/Off) Trace IP route over IP network User-defined Max. number of hops (1 to 255) Information per hop: Ping time (Max./Min./Avg.), Number of ping timeouts IP Channel Statistics Supported Bit Rate Statistics 10 Mbps, 100 Mbps, 1 Gbps, 10 Gbps Statistics for up to 230 channels, identified by user-defined combinations of: IPv4, IPv6 or MAC address VLAN ID or MPLS label Protocol information IP next header (protocol) TCP/UDP ports Traffic capacity: 10 Mbps, 100 Mbps, 1 Gbps, 10 Gbps, line speeds: 100% line load Available Information per channel: Frame count/rate, Throughput, Byte count, MPLS frames, IP frame/packet size distribution, IP header bytes, IP fragments, TTL threshold violations, IP packet count/rate, IP bytes, IP throughput, IP header errors, TCP/UDP bytes, TCP/UDP packet count/rate, Throughput, TCP/UDP errored packets, Undersize frames, Oversize frames MPLS/MPLS-TP Number of MPLS Header Parameters per MPLS Header Statistics OAM (MPLS-TP) Up to 8 MPLS headers set by user User-defined label, Exp and TTL fields in each MPLS header Address increment, Decrement and Random generation An EoMPLS (Ethernet over MPLS) or PWE3 (Pseudo-wire emulation edge-to-edge) label (RFC 4448 control word) can be added. MPLS can only transport VLAN if EoMPLS activated. Number of labels (Max./Min.) Number of MPLS-TP frames Last received MPLS-TP label/priority/ttl ITU-T G comply Supported OAM messages ITU-T Y.1731: CCM, LBM, LBR, LTM, LTR, AIS, LCK, TST, MCC, LMM, LMR, 1DM, DMM, DMR, EXM, EXR, VSM, VSR, SLM, SLR IEEE 802.1ag: CCM, LBM, LBR, LTM, LTR PBB (Mac-in-Mac MiM) Programmable Field Result OAM B-tag, I-tag, MAC destination and source addresses Number of PBB frames, Last received B-tag VLAN ID, Last received B-tag priority, Last received I-tag priority, Last received I-tag service ID Supported OAM messages ITU-T Y.1731: CCM, LBM, LBR, LTM, LTR, AIS, LCK, TST, MCC, LMM, LMR, 1DM, DMM, DMR, EXM, EXR, VSM, VSR, SLM, SLR IEEE 802.1ag: CCM, LBM, LBR, LTM, LTR 18

19 Ethernet Testing Specifications Ethernet OAM OAM Standards Supported Messages Supported IEEE 802.3ah Function Statistics ITU-T Y.1731 (Service layer OAM) IEEE 802.1ag (Connectivity layer OAM) IEEE (formerly IEEE 802.3ah) (Access link OAM) Generates and receives following OAM messages. Supported OAM messages ITU-T Y.1731: CCM, LBM, LBR, LTM, LTR, AIS, LCK, TST, MCC, LMM, LMR, 1DM, DMM, DMR, EXM, EXR, VSM, VSR, SLM, SLR IEEE 802.1ag: CCM, LBM, LBR, LTM, LTR IEEE 802.3ah: Information, Variable request, Variable response, Loopback control Discovery Loopback activate Number of each message generated/received Synchronous Ethernet Test Supported Bit Rate SyncE (ITU-T G.826x) Functionality IEEE 1588 v2 Functionality 10 Mbps, 100 Mbps, 1 Gbps, 10 Gbps Specify Quality Level (QL) of transmitted Ethernet signal. Analysis of QL indicated in received Ethernet signal with alarm at missing QL indications. SyncE results: SSM Rx count and rate, SSM Tx count, Indicated QL statistics, SSF seconds ESMC messages captured and exported in Wireshark format. Each port of the Ethernet interface can act as a timing master or a timing slave independently. Supported modes: Multicast (native PTP), Unicast (G ) When acting as master in Unicast (G ) mode, one slave is accepted at a time. If the slave requires 32, 64, or 128 Sync messages per second, IEEE paragraph specifying 90% confidence interval is not followed. Configurable parameters (per port): Clock identity, Port number, Priority 1, Priority 2, Domain number, Clock class, Slave only mode, Time source, Encapsulation, Announce receipt timeout, Clock accuracy, Clock step mode, Announce interval, Sync interval, Minimum delay request interval and Unicast duration. The UTC offset used when acting as clock master can be specified. Ethernet Frame Capture Capture Buffer Size Capture Frame Slicing Include Tx Frame Capture Trigger Trigger Error Trigger Condition Field Capture Data 1 Mbytes to 128 Mbytes (10 Mbps, 100 Mbps, 1 Gbps, 10 Gbps) 512 kbytes (40 Gbps, 100 Gbps) When capture buffer full: Stop or Wrap If activated capture frame is first 64 bytes or 128 bytes of each frame (ignores rest of frame) On/Off Manual, On error, Field match Trigger position: Top, Middle Fragmented frames Oversize frames Undersized frames Undersized and oversized frames FCS errored frames Any type Enabled when capture trigger setting is field match Offset: 0 to bytes Length: 1 bytes to 16 bytes Value: 16-byte data (max.) Pcap format for display in Wireshark 10G WAN-PHY WAN Mode Terminology Error Generation Alarm Generation Error Measurement Alarm Detection Overhead Byte Functionality 10 Gbps Ethernet SDH or SONET SDH: A1A2, B1, B2, MS-REI, B3, HP-REI SONET: A1A2, B1, B2, REI-L, B3, REI-P SDH: LOF, OOF, MS-AIS, MS-RDI, MS-TIM, AU-AIS, AU-LOP, HP-PLM, HP-UNEQ, HP-TIM, HP-RDI, LCD SONET: LOF, SEF, TIM-S, AIS-L, RDI-L, AIS-P, LOP-P, TIM-P, PLM-P, UNEQ-P, RDI-P SDH: A1A2, B1, B2, MS-REI, B3, HP-REI SONET: A1A2, B1, B2, REI-L, B3, REI-P G.826, G.828+G.829 or M (M.2100) error performance parameters are calculated SDH: LOS, LOF, OOF, MS-AIS, MS-RDI, MS-TIM, AU-AIS, AU-LOP, HP-PLM, HP-UNEQ, HP-TIM, HP-RDI, LCD, LSS SONET: LOS, LOF, SEF, TIM-S, AIS-L, RDI-L, AIS-P, LOP-P, TIM-P, PLM-P, UNEQ-P, RDI-P, LCD-P, LSS Generation of user-defined overhead bytes Capture and display of current overhead bytes Reflector Reflector Mode The following parameters are user selectable: Reflector MAC/IP address Swap all MAC addresses or one specific MAC address Swap IP addresses Swap port numbers on UDP/TCP frames Force ACK on TCP frames Answer incoming ARP, Ping requests Wireshark is a registered trademarks of the Wireshark Foundation. 19