Key Features. 1GbE/ 10GbE OTN. Handheld All In One Tester OTN, SDH/SONET, 1G/10G Ethernet, Fiber Channel SDH/ SONET

Transcription

1 BlueScope B BL6000A Handheld All In One Tester OTN, SDH/SONET, 1G/10G Ethernet, Fiber Channel 1GbE/ 10GbE Test & Measurement s [[TYPE A QUOTE SMALLEST, FROM THE DOCUMENT ULTRA LIGHTWEIGHT OR handheld THE SUMMARY testing solution OF AN INfor TERESTING OTN, SDH/SONET, Ethernet, POINT. YOU & Fiber-Channel CAN POSITION THE TEXT BOX ANYWHERE IN OTN SDH/ SONET FC Key Features SONET/SDH Tx Overhead Byte Sequence Generation Rx Overhead Byte Capture Multi-Channel Monitoring The BlueScope BL6000A is the next generation in handheld T&M solutions BlueScope Benefits: Anytime, anywhere Ethernet/SONET/SDH/OTN/Fiber Channel testing Compact, ultra lightweight form factor Intuitive Graphical User Interface (GUI) Reduces training time Eliminates the need for multiple test instruments Reduces cost of ownership Open architecture H/W and S/W platforms Capabilities to Support the Expansion of Your T&M Needs on a Higher Scale Contact Information: Web: US & Canada: Support: support@bluelighttec.com TEL: Sales: sales@bluelighttec.com FAX: Bluelight Technology Incorporated. All rights reserved. Specifications subject to change without notice. All product and company names are trademarks of their respective corporations. Do not reproduce, redistribute, or repost without written permission from Bluelight Technology. Rev 2.0 April 9, 2010 OTN OTU1 & OTU2 OTU1e (Optional) OTU mapping (optional) 1G/10G Ethernet Metro Ethernet: SyncE & 1588v2 32 Multi-stream Traffic Generation & Analysis Y.1564 (Multiple streams) Packet Capture/Decode RFC2544 (Delay, Jitter) PBB/ PBB-TE (Mac-in-Mac) Real Time Traffic Monitoring Packet Flooding Generation Wireless LAN (Wifi) VoIP / IPTV Fiber Channel 1x/ 2x/ 4x

2 Trendsetter of Network Test & Measurement General Specifications Hybrid user interface (UI) with graphical color touch-screen and also keypad at the same time, user-friendly, easy to use Supports multi-physical ports such as one XFP, one Optic 1000BASE-SX/LX/ZX, 100FX/LX, and one RJ45 copper 10/100/1000 BASE-T Multiple testing capabilities: Ethernet, SONET/SDH, OTN, and Fiber Channel Be able to upgrade a new software version via USB or FTP. File Manager: Be able to copy testing results, log files, screen capture and packet capture files to USB memory card Optical power measurement Customizable test profiles for quick and efficient test set configuration Optional Ethernet Features Packet Capture and Decode Packet Flooding Mac/VLAN/IP/User Defined Field Performance Measurement (Throughput Test: 32 multi-streams) L1/Unframed BERT (Cable BERT-RJ45, Unframed BERT-SFP Optic) Network Discovery 100 FX/LX (Optic) VoIP IPTV PBB/PBB-TE(MAC-in-MAC) 10G WAN PHY Y.1564 (SAM) IPv6 Ethernet Timing Synchronization: SyncE & 1588v2 Standard Ethernet Features Performance Measurement (Throughput Test: 4 multi-streams) Packet Filtering (MAC/IP/Port/VLAN/MPLS/TOS/DHCP, Protocol, User defined) IP Tools (Ping, DHCP, Trace Route) Loopback Mode (L1-L4, auto, filtered) MPLS (stacking up to 3 MPLSs) VLAN, Q-in-Q (up to 3 VLANs) Framed Bit Error Test (BERT) L2-4 RFC 2544 (Network Equipment Benchmarking Test) Cable Diagnostics Remote Control via VNC Report Generation PDF, TXT, CSV System Tools

3 SDH / SONET Features and Options Standard SDH/SONET Features SONET/SDH Test: 155Mb/s, 622Mb/s, 2.5Gb/s, 9.6Gb/s STM1/4/16/64 = STS-3/12/48/192 Terminated/Line thru/intrusive thru Mode The received signal is looped through the BL6000 and retransmitted without termination of alarms and errors in Line Thru mode. In the Intrusive thru mode, HO and LO OH bytes, AU/TU pointers and payload signals are retransmitted, But Section/RS and Line/MS OH bytes are terminated and overwritten. High-order Mapping include ACAT STS-1/3c/6c/9c/12c/24c/48c/192c AU-3/AU-4/AU-4-2c/3c/4c/8c/16c/64c Low-order Mapping STS1-VT2-VT2SPE, STS1-VT2- VT1.5SPE, STS1-VT1.5-VT1.5SPE AU4-TU3-VC3, AU4-TU12-VC12, AU4- TU12-VC11, AU4-TU11-VC-11, AU3- TU12-VC12, AU3-TU12-VC11, AU3- TU11-VC-11 Full Overhead Manipulation and Monitoring All OH bytes statically programmable except MFAS, BIP8 Rx Overhead Byte Capture - One Rx OH byte can be selected and up to 256 events captured with byte trigger option Tx Overhead Byte Sequence Generation - One Tx OH byte can be selected for a freely defined sequence of 1~256 bytes Alarm/Error Generation and Monitoring LOS, LOF, OOF Programmable Error/Alarm Generation Error mode : Single Burst, Rate(1E-3 ~1E-9) Alarm mode : Continuous, Periodic (Defected & Non-defected Number of Frames), Single(Defected Number of Frames) Pointer Generation & Monitoring/Capturing High-order (HO) & Low-order (LO) Up to 512 Actions Tandem Connection Monitoring Performance Monitoring G.821, G.828 (incl. G.826), G.829 Standards Service Disruption Time (SDT) Measurement Automatic Protection Switching (APS) is used to switch traffic to backup links if faults will be occurred. During the switch event the service will be disrupted. Limits are defined and need to be checked for this Service Disruption Time. BL6000A has Disruption Separation Time - (1 ~ 2500 msec) Configurable Disruption Sensor Alarm/ Error Round Trip Delay Round Trip Delay can be measured by Local loop and DUT s remote Loop Supported Test pattern PRBS2E31, PRBS2E23, PRBS2E20, PRBS2E15, PRBS2E11, PRBS2E9, each Inverted PRBS and 16bits programmable user-pattern Optional SDH/SONET Features Unframed Line Rate Test OTN: OTN1/2, 1e/2e, 1f/2f SONET/SDH: STM-1/OC3 STM64/OC- 192 Ethernet: 1G 10G Fiber Channel: FC 1X 10X Multi-Channel View Drill down to view the path hierarchy in its entirety on one screen SONET: 48 x STS-1 and 28 x VT 2/1.5 SDH: 48 x AU-3 and 28 x TU12/TU11 Automatic detection of payload type (concatenated or non-concatenated)

4 OTN Features features and Options Standard OTN Features Bulk Test: OTU 1/2, OTU 1e/2e Programmable FEC Error Generation Programmable FEC Error Generation function allows the user to define a detailed position for correctable FEC error and un-correctable FEC error as well Ratio FEC error insertion(1e-3 ~ 1E-9) is supported with random position Graphical FEC Error (Codeword, Byte) Monitoring Correctable FEC Error and Uncorrectable FEC Error positions are accumulated and monitored at graphical hierarchy window, which allows users to easily recognize the position of FEC error Full Overhead Access/ Manipulation All OH bytes statically programmable except MFAS, BIP8 SAPI(16bytes),DAPI(16bytes) and operator specific field(32bytes) of SM/PM/TCM TTI supported PSI(Payload Structure Identifier), PT (Payload Type) and FTFL(Fault Type & Fault Location) are supported Rx Overhead Byte Capture - One Rx OH byte can be selected and captured up to 256 events with Byte trigger option Tx Overhead Byte Sequence Generation - One Tx OH byte can be selected for a freely defined sequence of 1~256 byte In the Intrusive thru mode, OPU OH bytes and payload signals are retransmitted, but OTU, ODU OH bytes are terminated and overwritten. Programmable Error/Alarm Generation incl. TCM Error/Alarm detection incl. TCM Count, Current rate and Average rate are displayed for each error Defected time(second basis) is measured for each Alarm SDT(Service Disruption Time) Measurement RTD(Round Trip Delay) Measurement Supported Test Pattern PRBS2E31, PRBS2E23, PRBS2E20, PRBS2E15, PRBS2E11, PRBS2E9, each Inverted PRBS and 16bits programmable user-pattern Optional OTN Features Mapping/ De-mapping Test: OTU 1 to OTU 2 Line thru/intrusive thru Mode The received signal is looped through the BL6000 and retransmitted without termination of alarms and errors in Line Thru mode.

5 Fiber Channel Features and Options Standard Fiber Channel Features Other Optional Features Performance Measurement: Line Emulation Mode Gbps, 2.125Gbps, 4.250Gbps Real signal delay based on hard-wired Speeds DDR2 memory provides high Point to Point Topology Testing accuracy( +/- 1 step resolution) Configurable IFG G ~ 9.953G : 5.6 ~ 6.4 ns Support B2B Credits 4.25G ~ 1.06G : 7.5 ~6.0 ns Support Port Login 622M : 12.8ns Selectable Class of Service 155M : 51.4ns Support RRDY Injection Signal delay can be injected to OTN Up to 32 Streams Per Port (incl. over-clocked OTN), SDH/SONET, FC-2 Packet Frames Ethernet (1GE & 10GE) and Fiber (Continuous, Burst-Once, Random Channel (1X,2X,4X,10X) Length) Delay Range and Step Resolution FC-2 Frame Header Configuration Error / Alarm Injection during Signal Delay Payload (PRBS, Increment, Decrement, Line Emulation User Pattern) Bit Error Insertion Frame Size (28 byte up to 2148 byte) LOS Alarm Insertion Frame Rate (%, BPS, FPS) Error Injection (FCS, Duplicated, Lost, Late Frame, Bit Error) Packet Filtering FC-2 Frame Header User Definable Filter D_ID, S_ID R_CTL, CS_CTL, TYPE SEQ_ID, DF_CTL, SEQ_CNT OX_ID, RX_ID, Parameter Loopback Layer 1 (All), L2 (All and Filtered), and Auto Loopback with Marker Per Frame/Per Packet based Measurement Packet Flooding Random or Incremental Flooding Based on D_ID, S_ID, User Defined Field Controlled by Start and Stop Values