Installation, Testing, Commissioning, Troubleshooting, and Maintenance. Our Consultant: MR. TAN SWEE BENG

Transcription

1 14 & 15 MAY 2018 SUNWAY CLIO HOTEL Our Consultant: MR. TAN SWEE BENG This training plan assumes that the new trainee have some basic knowledge of Refraction and Reflection of light through media of different density and refractive Indexes. This basic optical transmission theory is currently included in the Syllabus for Physics at SPM level and also included as part of Transmission studies if the trainee has gone through trainings for Certificate or Diploma in Telecommunications covered under the subject of Transmission theories. To build a strong foundation and good understanding on optical fiber transmission system, it is important that the training should start with the theories governing the optical transmission in an optical fiber. It is then followed by the design and properties of the optical fiber and cable, criteria for network and system design, implementation as well as Operation and Maintenance requirements.

2 TRAIN INSANE, OR REMAIN THE SAME.

3 COURSE INTRODUCTION This training plan assumes that the new trainee have some basic knowledge of Refraction and Reflection of light through media of different density and refractive indexes. This basic optical transmission theory is currently included in the Syllabus for Physics at SPM level and also included as part of Transmission studies if the trainee has gone through trainings for Certificate or Diploma in Telecommunications covered under the subject of Transmission theories. To build a strong foundation and good understanding on optical fiber transmission system, it is important that the training should start with the theories governing the optical transmission in an optical fiber. It is then followed by the design and properties of the optical fiber and cable, criteria for network and system design, implementation as well as Operation and Maintenance requirements. WHO SHOULD ATTEND Open to beginners and experienced fiber optics personnel Those who are maintaining fiber optics network Those who are in supervision of IT projects Open to businessmen to expand & diversify their business network Open those who like to upgrade technical knowledge and skills LIST OF EQUIPMENT FOR DEMONSTRATION 1. Fusion Splicing Machine - to joint or splice two fiber optics by using fusion method 2. OTDR - Optical Time Domain Reflectometer - to determine length of fiber optics cable, to determine exactly damaged fiber optics location and troubleshooting purpose 3. Power Meter and Light Source - to conduct final acceptance test fiber optics after installation. 4. Fiber Inspection Probe - to check fiber in working status 5. Visible Light Source - to check fiber pigtails and patchcords continuity

4 COURSE CONTENT Module A. Introduction to Optical Fiber Transmission Systems. (2 hours) This module would base on a generic model for typical optical fiber transmission system to describe: i. A brief description on each of its important network elements and functions. ii. Brief description on applications of optical fiber. iii. Compares the features and advantages of optical fiber transmission system over other media such as copper lines and wireless or microwaves. iv. How an optical fiber is drawn from a pre-form. This module aims to lay a strong interest and present the importance of optical fiber transmission for modern telecommunication networks to support broadband Module B. Optical Fiber Design, Working Principles and Optical Loss Mechanisms. (2 hours) This module covers the following subjects: i. The structural design of an optical fiber. ii. Theory of optical signal transmission within the fiber core. iii. Different modes of transmission in different types of fiber. iv. Optical power loss mechanisms. v. Different type of optical dispersion and their effects on optical transmission signal. vi. Different optical transmission windows over the optical spectrum. vii. Types of Single Mode fibers as specified under ITU-T and their characteristics. This module aims to provide a good understanding on optical fiber theories as basis for sound optical network planning as well as operation and maintenance. Module C. Optical Fiber Cable Designs. (2 hours) This module covers the subject of: i. Different types of optical cable designs and their applications. ii. Installation methods and laying in of different types of cables. iii. Different ways to joint an optical fiber cable and jointing tools and accessories of optical fiber cable. This module will provide a sound knowledge on different type optical cables, their designs and applications.

5 Module D. Optical Network Elements. (2 hours) Subjects covered under this module include: i. Active network element for different applications ii. Passive elements in a typical optical network within and outside exchanges. iii. Design and construction of an optical connectors. Module E. Basic Optical Network Designs. (2 hours) The purpose of this module is to describe: i. Different network elements in an optical fiber network. ii. Optical network design with maximum resiliency to fiber breaks and system failures. iii. Introduction to different of network protecting switching modes. This module aims to introduce trainees to basic optical network designs and their various possible modes of protection switching to restore services manually or automatically. Module F. Optical fiber tools and test equipment with hands-on practical session (4 hours) This module introduces basic tools and test equipment required to install and maintain an optical fiber network with a brief description on their principles of operation and applications in different scenario. i. Installation tools (Splicing Machine & tools) ii. Acceptance and commissioning test equipment (Optical power meter and OTDR) iii. Maintenance and trouble-shooting tools (OTDR, Visible Light Source and Fiber Inspection Probe) This module introduces trainees to tools and test equipment required for optical network installation, test and maintenance. It also serves to prepare trainees for more advance courses on actual optical fiber splicing, testing and troubleshooting modules.

6 OUR CONSULTANT Mr. Tan Swee Beng is a free lance telecommunication consultant; holding a Diploma from UTM in 1975 and BSc. (Hons) degree in Telecommunication from Portsmouth University in England (1982) under the JPA scholarships; he has accumulated more than 40 years of experiences in the telecommunication industry, particularly in optical fiber network design, operation and maintenance. Mr. Tan was among the pioneer group of engineers from Telekom Malaysia who were involved in installation, operation and maintenance of fiber optic systems in Malaysia since 1982 and is widely recognized as among the most experienced and respected fiber optic experts in Malaysia. During his service in TM, he last served as AGM in Network Development Department, HQ where he was instrumental in drawing up TM s first FTTH design and specifications. Upon retirement from active duties, he conducted numerous trainings in FTTH planning, implementation and maintenance for TM engineers as well as its contractors between years 2008 to 2010 in its training center. Between years 2010 to 2014, he was engaged as full time OSP and fiber optic technical consultant to Huawei Technologies South Pacific HQ; where he played a leading role in the network design and implementation for various OSP and FTTH projects in Malaysia (Maxis NGBB), Indonesia (FTTH), Brunei (FTTH), New Zealand (Ultra Fast Fiber using micro duct and air blown cable), Hungary (FTTH) and Singapore under Huawei. During this period, he drew up OSP and network specifications, conducted trainings to telco and their contractors in those countries on fiber optic related subjects, including optical transmission theory, OSP and optical network design, implementation, testing and maintenance and helped to ensure successful project implementation.

7 14 & 15 MAY 2018 IDA Please register the following personnel to attend the training as above Please photocopy for multiple bookings. Name: Designation & Dept. : Office (Direct Line) Mobile Phone: 4 EASY WAYS TO REGISTER Call : Fax : /2 register@iknowledge.com.my Mail : Suite 3A21, Kelana Centre Point, Block A, Jalan SS7/19, Kelana Jaya, Petaling Jaya Selangor, Malaysia TRAINING INVESTMENT Early Bird Registration (Before 14 th April 2018) Early Bird Pricing : RM 3200 per pax (RM 3392/pax incl 6% GST) Name: Designation & Dept. : Office (Direct Line) Mobile Phone: Name: Designation & Dept. : Office (Direct Line) Mobile Phone: Normal Registration Individual Pricing : RM 3400 per pax (RM 3604/pax incl 6% GST) Group Pricing : RM 3300 per pax (RM 3498/pax incl 6% GST) (for 3 pax and above) GST No. : UPCOMING COURSES i. Business Continuity Planning Workshop ii. Grounding for Electrical Substations iii. Basic Air Conditioning iv. Emergency Generator Set & It s Maintenance Please contact our sales personnel for detailed of 2017 course calendar COMPANY REGISTRATION POLICY It is important to read and understand our Company Registration Policy before signing or stamping the registration form. You may get a copy of our policy from our personnel or from the link below: Company Name: Contact Person: Designation: Address: Office (General Line): Office (Direct Line): Fax No: Person In Charge: (Finance) (Finance): Contact Number: (Finance) I hereby agree to Asia iknowledge Sdn. Bhd. s Company Registration Policy by signing or affixing the company stamp below: CANCELLATION & PAYMENT POLICY You may substitute the participants any time. No cancellation is allowed upon issuance of confirmation and tax invoice. Payment has to be made prior to training date. PROGRAM POLICY Our consultant & topics are confirmed at the time of publishing. However, circumstances beyond the control of the organizers may occur. Asia iknowledge S/B reserves the right to alter or modify the advertised speakers/ dates/topics if necessary. PAYMENT DETAILS Payment is required within 7 days upon receipt of the invoice. All payment must be received 7 working days prior to the training date. 1. Direct Deposit Company Name: ASIA IKNOWLEDGE SDN BHD Account number: Bank: United Overseas Bank (Malaysia) Berhad, UOBM Damansara Uptown, Ground Floor, No. 1, Jalan SS21/58, Damansara Uptown, Petaling Jaya, Selangor * Please instruct your bank to pay all transfer charges from your account and send in a copy of remittance advice by /fax. 2. Bank Cheque or Bank Draft Payable to ASIA IKNOWLEDGE SDN BHD Authorized Signature Company Stamp