SYSTEMS PLANNING AND MANAGEMENT TOWARDS SMART GRID APPLICATION

Transcription

1 Terms SEMINAR and ON Conditions MALAYSIAN STANDARDS FOR POWER 14-May-15 (Thursday),, Auditorium Dato Yahaya Ahmad, SIRIM Berhad, Shah Alam Introduction Tentative Programme The Malaysian Grid Code (Grid Code), published by the Energy Commission Malaysia, is a regulatory instrument much needed to coordinate various electricity supply activities. It is a set of technical specification which defines the parameters an electricity generating plant and grid system network have to meet to ensure proper functioning of the electrical grid. The Grid Code is a set of technical regulations used by utility companies such as Tenaga Nasional Berhad (TNB) and Independent Power Producers (IPPs) in the Peninsular Malaysia that serves as the main guidelines in electricity supply operation; to ensure the electricity supply in Peninsular Malaysia remains reliable. The planning, design, and operation of a power system requires engineering studies to evaluate performance of existing or proposed system, reliability, safety, and economics. Studies, properly thought off, structured and conducted, are cost-effective way to prevent the unexpected and to optimize equipment selection. In the design stage, the studies specify equipment and ratings to avoid potential deficiencies in the system before it goes into operation. In existing systems, the studies help identify the cause of failure and mal-operation, and determine corrective measures for improving system performance. The need to carry out system studies is also in line with the requirement of the Grid Code. Realising the importance of the minimum requirement for studies on planning, design and operation of high voltage power systems, and the associated enablers for good practice of grid management, the Department of Standards Malaysia has published various series of Malaysian Standard (MS) on power system planning and management. These MS are fundamental in initiatives towards developing smart grid applications. The MS referred in this seminar are developed by the Working Group on Power System Planning, Operation and Studies (WG/E/7-6) and the Working Group on Power Systems Management and Associated Information Exchange (WG/E/7-4). These WGs were established within the Malaysian Standards Development Systems under the purview of the Department of Standards Malaysia, a government agency of the Ministry of Science, Technology and Innovation (MOSTI). Objectives To provide awareness to the stakeholders on the MS related to power systems studies and interfaces among enabling systems and devices. To provide guidelines for power system studies on planning, design and operation. To provide a platform for user-expert discussion on the use of the MS related to power system planning, operation and grid management enabling devices. To promote and encourage active participation from private and public technical sectors in the standard development activities for power system planning, operation and grid management enabling devices. Target Audiences Power system planning and design engineers / experts Power system automation engineers / experts Power system operation engineers / experts Smart grid system manufacturers Oil and gas power generation engineers Electrical train and transportation engineers Independent power producers Researchers Power utility companies Asset managers Project managers Power system lecturers CPD hours applied from BEM MANAGED BY: Time Subject 8.00 am Registration 9.00 am Opening Remarks By: YBhg. Datuk Fadilah Baharin Director General Department of Standards Malaysia 9.15 am Keynote Address on IEC Framework Smart Grid Application By: Mr. Razib bin Dawood Working Group (WG) on Power System Planning, Operation and Studies; WG on Power Systems Management and Associated Information Exchange / Suruhanjaya Tenaga 9.45 am Introduction of Seminar on MS for Power Systems Planning and Management Towards Smart Grid Application By: Tn. Hj. Mohd Yusof bin Rakob Chairman of WG on Power System Planning, Operation and Studies am Paper 1: Overview of MS 2572:14 for Smart Grid Application (Power flow, Stability and Modeling) By: Mr. Zaharulnain Osrin WG on Power System Planning, Operation and Studies/ Advanced Power Solutions Sdn. Bhd am Break and Networking Session am Paper 2: Overview of MS 2572:14 for Smart Grid Application (Short circuit, Harmonics and Reliability) By: Dr. Hazlie Mokhlis WG on Power System Planning, Operation and Studies / Universiti Malaya pm Paper 3: Communication Networks and Systems for Power Utility Automations (MS IEC series) By: Ir. Aminuddin Musa WG on Power Systems Management and Associated Information Exchange / Tenaga Nasional Berhad (Transmission) pm Lunch 2.00 pm Paper 4: Common Information Model and Energy Management System (MS IEC Series) By: Ir. Tajul Ariffin Sulaiman Tenaga Nasional Berhad (Transmission) 2.45 pm Paper 5: Security in the Power Systems (MS IEC Series) By: Ir. Wan Azlan Wan Kamarul Zaman WG on Power Systems Management and Associated Information Exchange / Tenaga Nasional Berhad (Transmission) 3.30 pm Paper 6: Industry Perspective on Smart Grid Application (Power Utilities Experience) By: Ir. Dr. Mohd Fadzil Mohd Siam Tenaga Nasional Berhad Research Sdn. Bhd pm Closing Remarks By: Tn. Hj. Mohd Yusof bin Rakob Chairman of WG on Power System Planning, Operation and Studies 4.30 pm Refreshments and End of Seminar

2 Terms SEMINAR 2 and ON Conditions MALAYSIAN STANDARDS FOR POWER 14-May-15 (Thursday),, Auditorium Dato Yahaya Ahmad, SIRIM Berhad, Shah Alam Fees and Seminar Packages All seminar packages offered are inclusive of seminar materials, certificate of attendance, refreshments and lunch. The seminar packages offered are as follows: Package A RM80 : Entrance to the seminar and will not receive any MS. Package B RM280 : Entrance to the seminar and entitled to receive MS 2572:14 - Guidelines for power system steady state, transient stability and reliability studies Purchase of Malaysian Standards (MS) Other MS for Power Systems Management and Associated Information Exchange are also available for individual purchase from SIRIM Berhad. Tick ( ) in the column below if you wish to purchase the MS and would like to receive the document (s) on the seminar day. Please return this page together with the Registration Form (pg 5) to us at (fax) and zakiiah@sirim.my. LIST OF MALAYSIAN STANDARDS ON POWER SYSTEMS MANAGEMENT AND ASSOCIATED INFORMATION EXCHANGE AVAILABLE FOR PURCHASE FROM SIRIM BERHAD: For more information on the purchase of these documents, please contact Ms Shamsidar Lokman at , sidar@sirim.my. These documents are also available at *SIRIM Library members are entitled to 10% discounts No. MS No. Description Price (RM) Tick ( ) 1 MS 2572:14 Guidelines for power system steady state, transient stability and reliability studies 2 MS :11 Communication networks and systems in substations - Part 1: Introduction and overview 3 MS :14 Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs (IEC :09, 4 MS :12 Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models (IEC :11, 5 MS :14 Communication networks and systems for power utility automation - Part 7-2: Basic communication structure - Abstract communication service interface (ACSI) (IEC :10, 6 MS :13 Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes (IEC :10, 7 MS :13 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes (IEC :10, 8 MS :14 Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping (SCSM) - Map-pings to MMS (ISO and ISO ) and to ISO/IEC (IEC :11, 9 MS IEC/TS :11 Communication networks and systems in substations - Part 2: Glossary(IEC/TS :03, IDT) 10 MS IEC :11 Energy management system application program interface (EMS-API) - Part 1: Guidelines and general requirements (IEC :05, IDT) 11 MS IEC :12 Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base (IEC :11, IDT)

3 Terms SEMINAR 3 and ON Conditions MALAYSIAN STANDARDS FOR POWER 14-May-15 (Thursday),, Auditorium Dato Yahaya Ahmad, SIRIM Berhad, Shah Alam Purchase of Malaysian Standards (MS) Other MS for Power Systems Management and Associated Information Exchange are also available for individual purchase from SIRIM Berhad. Tick ( ) in the column below if you wish to purchase the MS and would like to receive the document (s) on the seminar day. Please return this page together with the Registration Form (pg 5) to us at (fax) and zakiiah@sirim.my. LIST OF MALAYSIAN STANDARDS ON POWER SYSTEMS MANAGEMENT AND ASSOCIATED INFORMATION EXCHANGE AVAILABLE FOR PURCHASE FROM SIRIM BERHAD: For more information on the purchase of these documents, please contact Ms Shamsidar Lokman at , sidar@sirim.my. These documents are also available at *SIRIM Library members are entitled to 10% discounts No. MS No. Description Price (RM) Tick ( ) 12 MS IEC :12 Energy management system application program interface (EMS-API) - Part 501: Common Information Model Resource Description Framework (CIM RDF) schema (IEC :06, IDT) 13 MS IEC/TS :11 Energy management system application program interface (EMS-API) - Part 2: Glossary (IEC TS :04, IDT) 14 MS :12 Power systems management and associated information exchange - Data and communications security - Part 3: Communication net-work and system security - Profiles including TCP/IP (IEC :07, 15 MS :15 Power systems management and associated information exchange - Data and communications security - Part 4: Profiles including MMS 16 MS IEC/TS :11 Power systems management and associated information exchange - Data and communications security - Part 1: Communication net-work and system security - Introduction to security issues (IEC/TS :07, IDT) 17 MS IEC/TS :11 Power systems management and associated information exchange - Data and communications security - Part 2: Glossary of terms (IEC/TS :08, IDT)

4 Terms SEMINAR 4 and ON Conditions MALAYSIAN STANDARDS FOR POWER 14-May-15 (Thursday),, Auditorium Dato Yahaya Ahmad, SIRIM Berhad, Shah Alam Fees and Seminar Packages Fees All seminar packages offered are inclusive of seminar materials, certificate of attendance, refreshments and lunch. The seminar packages offered are as follows: Package A RM80 : Entrance to the seminar and will not receive any MS. Package B RM280 : Entrance to the seminar and entitled to receive MS 2572:14 - Guidelines for power system steady state, transient stability and reliability studies Registration and Fee Policy Registration is on first-come first-served basis. Limited to 100 pax. Registration can be done online at: Alternatively, registrant may also submit nomination of participants by filling up the registration form and send it via fax or to :- Ms Zakiiah Abdul Ghani (Tel: /zakiiah@sirim.my) Ms Asikhin Jamingan (Tel: /asikhin@sirim.my) Confirmation of reservation will be sent via . Walk-in delegates will only be admitted on the basis of seat availability at the seminar and with immediate full payment. SIRIM Berhad reserves the right to amend or cancel the programme due to circumstances beyond its control. In the event of such, SIRIM Berhad will provide an alternative arrangement to the delegate(s). Upon registration, you are deemed to have understood and agreed to the above terms and conditions. Cancellation and Replacements Policy Any cancellation must be received in writing within 7 days working days prior to the event else full payment will be imposed. A substitute delegate is welcomed if substitution is received in writing before the programme. Any no show by registered delegates will be liable for full payment of the programme fees. Payment Methods Full payment must be made before programme commence. All payments to be made payable to SIRIM Berhad either by cheque, Bank Draft or Cash Deposit. Please mail payment with registration form to : SIRIM Berhad, No. 1 Persiaran Dato Menteri, Section 2, PO Box 7035, Shah Alam, Selangor Attn:Ms Zakiiah Abd Ghani /Ms. Nor Asikhin Jamingan, Marketing and Sales Section, Technical Services Division, Level 1, Block 1 Payment via Cash/Cheque Deposit can be made payable to: SIRIM Berhad, Acount No : (CIMB Bank Berhad) - Please keep receipt/transaction record as proof of payment. Map to location Parking Space Seminar Venue IN 4

5 SEMINAR ON MALAYSIAN STANDARDS FOR POWER 14-May-15 (Thursday), Auditorium Dato Yahaya Ahmad, SIRIM Berhad, Shah Alam MANAGED BY: Tel: (Zakiiah) / 5114 (Asikhin) Fax: zakiiah@sirim.my / asikhin@sirim.my Closing date: 8-May-15 Contact Person :..... Organisation :... Company Registration No : Address: Tel. No:.. Fax No :.. Date :... Signature :.. Please indicate the nature of your business: Official Organisation Stamp: Manufacturer Retailer Exporter Importer Government/ Authority Distributor/ Wholesaler Academic Association/ NGO Others (Please specify) Mode of payment: Please tick ( ) one. Enclosed cheque/bank draft no for RM payable to SIRIM Berhad. Enclosed banked in slip for RM payable to SIRIM Berhad (Bank: CIMB). No Participant Tel. No Dietary * Seminar Fee The fees, sum or charges under this contract are exclusive of Malaysian sales tax, service tax and/or any other taxes that may be introduced by the Government of Malaysia from time to time, including the Goods and Services Tax (GST), which is proposed by the Government of Malaysia to be implemented effective from 1 April 15. Upon the implementation of GST, to the extent any supply under this contract is subject to GST, such GST shall be recoverable from you in addition to the fees, sum or charges for such supply under this contract. + GST 6% * Please cross whichever is not applicable TOTAL Disclaimer: SIRIM Group is committed in ensuring the confidentiality, protection, security and accuracy of personal information made available to SIRIM Group in accordance with the Personal Data Protection Act 10. It is your obligation to ensure that all personal information submitted and retained is accurate, not misleading, updated and complete in all aspects. SIRIM Group or its authorised officers shall not be responsible for any personal information submitted by SIRIM Group Staff that is inaccurate, misleading, incomplete or not updated. Please refer to our Personal Data Protection Policy at for further information. 5