H3C S5600 SWITCHING. Overview. Features

Transcription

1 H3C S5600 Overview The H3C S5600 Series Ethernet Switches are a new generation of mlti-layer switches that entirely flfills the enterprise cstomers reqirement of designing and implementing a nified, highly resilient network. One of the most important and innovative highlights of the S5600 Series Ethernet Switches is the IRF (Intelligent Resilient Framework) technology which presents the very advantage of stackable technology. IRF enables network managers to bild adaptable networks with high reliability, scalability and easy management. S5600 Series Ethernet Switches represent the next generation desktop switches, they provide high-density GE ports, 10GE plink, and hot-swappable power sppliers and can be sed in access layer of Gigabit Ethernet network or in aggregation layer with high availability as well as scalability. The H3C S5600 Series Switches are available, offering a cost-effective path for meeting crrent and ftre service reqirements from enterprises and commercial bsinesses. The abndant featres inclde advanced qality of service (QoS), rate-limiting, access control lists (ACLs), static and Roting Information Protocol (RIP) roting, OSPF(Open Shortest Path First) and IRF fnction (distribted device management, distribted redndant roting and distribted link aggregation), QinQ (VLAN-VPN), RSPAN (Remote switched port analyzer), VCT (Virtal Cable Test), Protocol-Based VLAN and Voice VLAN, SSH V2 (Secre Shell V2), MVR (Mlticast VLAN Registration), EAD (Endpoint Admission Defense), DLDP (Device Link Detection Protocol) and HGMP V2(Hawei grop management protocol V2), Mlticast roting, DHCP Server and VRRP (Virtal Redndancy Roting Protocol), HWTACACS, BGP,MSDP (Mlticast Sorce Discovery Protocol), etc. The H3C S5600 Series Ethernet Switches inclde the following models: S C, S C-PWR, S C, S C-PWR and S F. S C/S C-PWR have 24 Ethernet 10/100/1000 Base-T ports, BASE-X SFP (combo), 2 dedicated stacking ports and one expansion slot. S C/S C-PWR have 48 Ethernet 10/100/1000Base-T ports, BASE-X SFP (combo), 2 dedicated stacking ports and one expansion slot. S F has 24 Ethernet 1000Base-X SFP ports, 4 10/100/1000Base-T ports (combo), 2 dedicated stacking ports and one expansion slot. S5600-PWR model spports PoE, which transmit power over Ethernet to endpoint-devices. The combo ports in S5600 are combo of 10/100/1000BASE-T and 1000BASE-X. Featres Fll wire-speed, mlti-layer switching S5600 series switches offer L2/L3 wire-speed switching capacity. The prodct series offers 10GE plink speed, satisfies the most demanding. The hardware spports L3 wire-speed switching, and is able to identify and process the traffic flows from L2-L4. With independent packet filters, all ports distingish different flows and forward them with corresponding priority. Innovative IRF technology S5600 Series adopt an innovative technology, Intelligent Resilient Framework, so bandwidth can be expanded and pgraded smoothly. With IRF technology, S5600 series switches can be stacked p to 8 nits, forming a distribted switching fabric with p to 96G stacking bandwidth between any two nits. From the management and configration perspective, the distribted switches act as one switching device and rn as one logical entity, while from a performance perspective, each switch in the IRF framework can make local forwarding decision both layer2 and layer3, the nit in the fabric can backp each other. Most importantly, IRF can provide the featres that sers are pressing for: reliability, scalability and manageability.

2 2 H3C S5600 S5600 Series switches spport RMON on IRF, cstomers can collect RMON history and statistics data of any nits from any switch in the fabric. detects a new ser MAC address. Frther more, the S5600 Series can Perform 802.1x athentication and MAC address-based athentication simltaneosly. HGMP V2 on IRF fnction allows cstomers to collect the information abot the connection relations of the devices in a network and candidate devices, conseqently maintaining and managing the clster topology. Peer fabric port detection fnction can decide whether a device can join a IRF fabric or not. Excellent PoE (Power over Ethernet) Spply Fnction The S5600 Series spport The Gest VLAN fnction, this fnction enables spplicant systems that are not athenticated to access specific resorces and ths perform the corresponding operations, sch as obtaining 802.1x client, pgrading client, or obtaining other pgrading programs. The S5600 Series can also prevent nathorized access to the network by binding any combination of MAC, IP and PORT. S5600 series spply PoE fnction for endpoint devices, providing power over copper Ethernet cable to endpoint (Powered Device, sch as IP phone, WLAN AP). S5600 series switches provide p to 48 simltaneos fll-powered PoE ports at 15.4W for maximm powered-device spport, sch as IP telephony and wireless LAN deployments. As PSE (Power Sorcing Eqipment) devices, all S5600 series Switches are 802.3af compliant PoE switches. With PoE and Voice VLAN technology, these innovative switches can provide the perfect soltion for a converged voice and data network. S5600 series Switches spports PoE Profile, that means PoE policy configrations applicable to different ser grops are stored in the corresponding PoE Profiles. When sers connect a PD device to the port that crrently has PoE Profile stored, the switch will atomatically apply the PoE configration defined in the corresponding port s PoE Profile to the PD device. Flexible secrity control policies The S5600 Series spport 802.1x athentication to identify sers who attempt to access the network. With the 802.1x client version checking fnction enabled on a switch, the switch checks the version and validity of the 802.1x client rnning on spplicant systems to prevent those that se earlier versions of 802.1x client or illegal clients from logging in. The S5600 Series spport Centralized MAC address athentication, it controls accesses to a network throgh ports and MAC addresses. This kind of athentication reqires no client software. When operating in centralized MAC address athentication mode, a switch begins to athenticate the ser if it Secre Shell V2 (SSH V2) offers secrity information protection and powerfl athentication fnction to safegard the Ethernet switch from attacks sch as IP address spoofing and plain text cipher interception. High reliability The S5600 series spport STP/RSTP and mlti-vlan based MSTP, greatly improving redndant back-p for links and falt tolerance capability, so that the network can rn with high stability. The S5600 series switches spport link-aggregation (inclde manal link aggregation and LACP), it is a simple and cost efficient way to expand the bandwidth of a switch port and balance the traffic among all the ports in a link aggregation. In addition, connection reliability is enhanced. The S5600 Series spport the optional RPS (Redndant Power Spply), ths improving the falt tolerance capability and normal network operation dration. Power modle of the S5600 Series is hot-swappable. The S5600 series spport VRRP, and can bild a VRRP back-p grop with other L3 switches. They can bild a redndant rote topological strctre when a falt occrs to garantee commnication continity and reliability, keeping network stats stable. S5600 spports ECMP (Eqal Cost Mlti-path Protocol) roting, which can be sed for load balance and roting redndancy. Abndant QoS policies The S5600 Series spport L2~L4 complex flow classification based on sorce MAC address/destination MAC address/sorce

3 3 H3C S5600 IP address/destination IP address/ports/protocols. efficiently. The S5600 Series spport flexible qee schedling algorithms, which can be set on the basis of port and qee at the same time. They spport Strict Priority (SP), Weighted Rond Robin (WRR) and SP+WRR; 8 priority qees and 2 drop precedence. The S5600 Series spport SNMP Agent logging, it means the network management operation logging fnction logs operations can perform remotely by administrators throgh SNMP. Abndant System Maintenance and Debgging Methods The S5600 Series spport Committed Access Rate (CAR) and limit the traffic speed in the 64Kbit/s granlarity. The S5600 Series spport RSPAN (Remote switched port analyzer), It breaks throgh the limitation that the mirrored port and the mirroring port have to be located in the same switch, and makes it possible that the mirrored and mirroring ports be located across several devices in the network, and greatly enhances the way that the network administrator can manage the switch. The S5600 Series can configre the Priority for Protocol Packets, each protocol packet has its own priority. Cstomers can modify the priority of the protocol packet with the help of relevant QoS commands. The S5600 Series spport to configre the control policy over Telnet, configring the sorce IP, destination IP, and sorce MAC to control over. Also specify whether the control action is permitting or denying access. Diversified System Configration and Management Modes The S5600 Series spport Simple Network Management Protocol (SNMP) v1/v2/v3 and RMON (Remote Monitoring) v1/2/3/9 grops of MIBs. They can be managed by general network management platform sch as OpenView, and H3C imc network management system. The S5600 Series spport Command Line Interface (CLI), Web based network management, modem dial-p and telnet which make the eqipment management more convenient. The S5600 Series spport System log, Hierarchical alarm management and alarm filtering, Detailed alarm/debg information otpt, Ping and Tracer, they also spport remote maintenance via Telnet Modems and SSH. The S5600 Series spport HWping, it is a new network diagnostic tool sed to test the performance of protocols operating on network and It is an enhanced alternative to the ping command. The S5600 Series spport DLDP (Device Link Detection Protocol), DLDP can detect the link stats of the optical fiber cable or copper twisted pair. If DLDP finds a nidirectional link, it disables the related port atomatically or informs sers to disable it manally depending on specific configration, to avoid potential network problems. The S5600 Series spport Loopback detection on ports, after sers enable loopback detection for Ethernet ports, the switch will monitor whether the ports have loopback on a reglar basis; if the switch detects loopback for a particlar port, and it will pt that port nder control. The S5600 Series spport VCT (Virtal Cable Test) which is convenient for trobleshooting. Cstomers can start the virtal cable test (VCT) to make the system test the cable connected to the crrent electrical Ethernet port. The test items inclde: whether short or open circit exists in the Rx/Tx direction of the cable, and what is the length of the cable in normal stats or the length from the port to the falt point of the cable. The S5600 Series spport HGMP V2 clster management, After enabling HGMP V2, the network administrator can manage several member switches throgh one command switch and only the command switch need a pblic network IP address, it can save pblic IP address greatly and manage the network more

4 4 H3C S5600 Specifications Featres S C S C-PWR S C S C-PWR S F Fixed port 24 10/100/1000 Base-T ports, BASE-X SFP (Combo) ports, and 2 dedicate high speed stacking ports 48 10/100/1000 Base-T, BASE-X SFP (Combo) ports, and 2 dedicate high speed stacking ports Base-X SFP ports, 4 10/100/1000 BASE-T(Combo), and 2 dedicate high speed stacking ports Extended slot Extended modle 8 ports 1000 Base-X SFP modle 1 port Xenpak 10GE Modle 2 ports XFP 10GE modle Performance Wire speed L2/L3 switching Port Switch capacity: 88Gbps Throghpt: 65.47Mpps Port Switch capacity: 136Gbps Throghpt: Mpps Port Switch capacity: 88Gbps Throghpt: 65.47Mpps Switching Fabric 192Gbps 240Gbps 192Gbps Flash 16M 16M 16M 16M 16M POE No Yes No Yes No Switching mode Forwarding Latency SDRAM Store and forward <40µs 128M Layer 2 featre MAC address table VLAN Stack Link aggregation Mirroring STP/RSTP/MSTP Flow control Up to 16K MAC addresses Spport blackhole MAC addresses Spport setting the maximm nmber of MAC addresses that can be learned at a port Spport Port-based VLAN (4k VLANs) Protocol-based VLAN Voice VLAN GVRP QinQ, Selective QinQ VLAN Mapping IRF(DDM, DRR, DLA) Stack p to 8 nits in one stacking grop Spport LACP Spport manal Link aggregation Up to 8 GE or 4 10GE ports in each aggregation grop Up to 32 aggregation grops Many-to-one port mirroring (mltiple monitored ports to one monitor port, N:1) Traffic mirroring IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Mltiple Spanning Tree Protocol instances (MSTP) BPDU Tnnel IEEE 802.3x (fll dplex) Port rate ratio(1% granlarity) and PPS based sppression Layer 3 featre IP roting Mlticast DHCP Spport Static rote Spport RIPv1/v2, OSPF v2, BGP4 Spport ECMP Spport VRRP Spport IGMP v1/v2 Spport IGMP snooping Spport MVR Spport PIM-DM/ PIM-SM/ MSDP DHCP Server DHCP Snooping DHCP Relay DHCP Client DHCP Snooping Option82/DHCP Relay Option82 Convergence

5 5 H3C S5600 Featres S C S C-PWR S C S C-PWR S F QoS ACL Spport bi-directional port rate-limiting, Committed Access Rate (CAR) Eight otpt qees on each port Spport three schedling modes: SP (Strict Priority), WRR (Weighted Rond Robin), SP + WRR Spport packet redirection. Spport re-labeling the 802.1p and DSCP priorities of a packet. L2~L4 Packet filter providing filtering based on sorce/destination MAC address, sorce/destination IP address, port, protocol, VLAN, VLAN range, MAC address range, or invalid frame Spport time range-based ACL Secrity Secrity Featre Spport Centralized MAC address athentication Spport Port isolation Spport MAC address black hole Spport MAC Address Learning Limit Prevent nathorized access to the network by binding of MAC, IP and PORT Spport IP sorce check Spport SSH V2 Spport Port secrity Spport EAD (endpoint admission defense) Spport IEEE 802.1X ser athentication Gest VLAN Spport HWTACACS athentication Management/ Maintenance Management and Maintenance Spport CLI (Command Line Interface), console port, Telnet configration mode Spport Remote configration via modem dial-p Spport System configration with SNMP v1/v2 /v3 Spport HGMP V2 Spport RMON (Remote Monitoring) v1/v2/v3/v9 grops of MIBs Spport H3C imc, Web-based network management Detailed alarm/debg information otpt Spport Ping, Tracert, HWping Spport remote maintenance via Telnet Modems and SSH v2 Spport System log Hierarchical alarm management and alarm filtering Spport DLDP (Device Link Detection Protocol) Saving debgging information into Flash Loopback detection on ports Spport VCT(Virtal Cable Test) Hardware configration Otline dimension 440 mm 43.6 mm 420mm (17.32 in in in.) Weight 7.1Kg 7.4Kg 7.1Kg Power spply Inpt voltage Inpt DC voltage of PoE power modle RPS power Maximm power consmption AC: Rated voltage: 100V to 240V, 50 Hz to 60Hz Maximm tolerance:90v to 264V, 50 Hz to 60Hz DC: Rated voltage: -48V to -60V Maximm tolerance: -36V to -72V The S C-PWR/S C-PWR mst se the external PoE PSU recommended by Hawei-3Com as its DC inpt, bt not the -48VDC power spply generally available in the eqipment room. Otherwise, the device may be damaged. DC inpt of the PoE power modle: Rated voltage: 53.5 V Max voltage range: 52 to 55 V Spported S C: 170 W S C: 230 W S F: 170 W S C-PWR: 540 W (DC inpt) Dissipated power:170w POE power:370w S C-PWR: 560 W (AC inpt) Dissipated power:190w POE power:370w S C-PWR: 970 W(DC inpt) Dissipated power:230w POE power:740w S C-PWR: 640 W(AC inpt) Dissipated power:270w POE power:370w MTBF (Years) Noise parameter S C: 50.8 dba(low speed),52.6dba(high speed) S C: 51.4 dba(low speed),54.5dba(high speed) S F: 54.6 dba(low speed),57.4dba(high speed) S C-PWR: 51.8 dba(low speed),54.1dba(high speed) S C-PWR: 52.2 db(low speed),53dba(high speed)

6 6 H3C S5600 Featres S C S C-PWR S C S C-PWR S F MTTR (hors) <2 <2 <2 <2 <2 Environment Operation temperatre: 0 C ~ 45 C Storage temperatre: -40 C ~ 70 C Operating hmidity: 5% to 85% non-condensing Relative hmidity: 10% ~ 90%, non-condensing Indstry standards spport Ethernet Protocol -IEEE BASE-T Ethernet -IEEE BASE-TX Fast Ethernet -IEEE802.1Q Virtal bridged Local Area Network (VLAN) -IEEE 802.1P QoS -IEEE 802.1D-1998 Priority and Dynamic Mlticast Filtering -IEEE802.3x fll dplex / flow control -IEEE802.3p for levels of priority -IEEE 802.1w Rapid Reconfigration( Spanning Tree ) -IEEE802.1D Spanning Tree -IEEE802.1S MSTP -IEEE 802.1X Port-based athentication -IEEE 802.1Z 1000BaseX Gigabit Ethernet -IEEE 802.3ad Link Aggregation -IEEE 802.3ae 10 Gigabit Ethernet standard Administration Protocol RFC 1812 (IPv4) RFC 826 (ARP) RFC 959 (FTP) RFC 783 (TFTP) RFC 768 (UDP) RFC 791 (IP) RFC 792 (ICMP) RFC 793 (TCP) RFC 2622 (Roting policy) RFC 2474 (Diffserv) RFC 2131 (DHCP) RFC 1058 (RIPv1) RFC 2338 (VRRP) RFC1723 (RIPv2) RFC 2328 (OSPF v2) RFC 3101 (NSSA) RFC 1587 (OSPF NSSA option) RFC 2370 (OSPF Opaqe LSA Option) RFC 1765 (OSPF Database Overflow) RFC 2362 (PIM-SM) RFC 1112 (IGMPv1) RFC 2236 (IGMPv2) RFC 2138 (RADIUS Athentication) RFC 2139 (RADIUS Acconting) RFC 2267 (Network Ingress Filtering) RFC 1157 (SNMP) RFC 1902 (SNMPv2) RFC854 (Telnet) RFC896 (Congestion control in IP/TCP network) RFC925 (Mlti-LAN ARP/Proxy ARP) RFC1122 (Reqirements for Internet Hosts) RFC1156 (TCP/IP MIB) RFC1212 (Concise MIB definitions) RFC1213 (MIB for Network Management of TCP/IP based internets (MIB II)) RFC1757 (RMON (grops and 9)) RFC1901 (Commnity based SNMPv2) RFC2573 (SNMPv3 Applications) RFC2576 (Coexistence between SNMP V1, V2, V3) RFC2597 (Assred Forwarding PHB grop (partial spport)) RFC2618 (Radis Athentication Client MIB) RFC2620 (Radis Acconting MIB) RFC2819 (Remote Network Monitoring MIB (grop 1,2,3,9)) RFC2865 (Remote Athentication Dial In User Service) RFC2869bis (Radis Spport for Extensible Athentication Protocol (EAP)) RFC2932IP (Mlticast Roting MIB) RFC3046 (DHCP/BootP Relay) Safety and Compliance Emissions / Agency Approvals CISPR 22 Class A FCC Part 15 Class A EN Class A ICES -003 Class A VCCI Class A AS/NZS 3548 Class A EN

7 7 H3C S5600 EN Immnity Prodct conforms to: EN 55024: 1998 EN EN EN EN EN EN Safety Agency Certifications UL rd ed. IEC 60950: 1999, corr. Feb. 2000; all national deviations EN 60950: 2000, ZB and ZC deviations CSA 22.2 No rd ed., 1995 AS/NZS 60950:2000, Astralia Networking Application Application in the convergent layer of large enterprise In a large enterprise, the S5600 series are located at the convergent layer. They are downlinked to layer 3 switches (or layer 2 switches), sch as S3600 series (or S5100/S3100), and plinked to a high-performance core layer switch (sch as S7500, S9500). With IRF technology, it can expand and pgrade bandwidth smoothly. Application in the data center In the data center, the S5600 series can be located at the center by the high capacity and performance. They are plinked to core switch throgh the 10 GE interface, and expanded and pgrade bandwidth via IRF technology, so it can meet data center s reqirement.

8 8 H3C S5600 Service and Spport (3Com APR) Global Services offers the resorces and talents of a major corporation pls more than two decades of experience in resolving network challenges and delivering bsiness benefits to enterprises arond the world. Global spport with a personalized, local focs in the local langage helps drive prodctivity and minimize expenses. Becase we nderstand both the technology and the bsiness, we re the partner yo need to remain strong and competitive. Sggested Service, Spport and Training Offerings GardianSM Maintenance Service This service provides comprehensive on-site spport and incldes advance hardware replacement, expedited telephone technical spport and software pgrades Note: May not be available in some contries ExpressSM Maintenance Service This service provides speedy access to H3C shipment of advance hardware replacements (inclding a for-hor option), expedited telephone technical spport and software pgrades An activity-aditing service focsed on improving network performance and prodctivity Network Health Check Incldes traffic monitoring, tilization analysis, problem identification, and asset deployment recommendations Extensive report provides bleprint for action Network Installation and Implementation Services Edcation and Training Experts set p and configre eqipment and integrate technologies to maximize fnctionality and minimize bsiness disrption For large and complex sites, implementation services inclde personalized configration, project management, extended testing and coaching on network administration Self-paced and instrctor-led technology and prodct corses, pls certification programs Prodct Warranty The H3C S5600 Series has a Limited Lifetime hardware warranty that incldes the power spply and fan assembly.

9 9 H3C S5600 Order Information Host 0235A11F LS-S C-OVS H3C S C Ethernet Switch with 24 10/100/1000BASE-T ports and BASE-X ports (SFP Req.) (Combo) (AC 110/220V, RPS DC -48V) 0235A11G LS-S C-PWR-OVS H3C S C-PWR Ethernet Switch with 24 10/100/1000BASE-T ports and BASE-X Ports (SFP Req.) (Combo) with (AC 110/220V, RPS DC -48V) 0235A11D LS-S C-OVS H3C S C Ethernet Switch with 48 10/100/1000BASE-T ports and BASE-X ports (SFP Req.) (combo) (AC 110/220V, RPS DC -48V) 0235A11E LS-S C-PWR-OVS H3C S C-PWR Ethernet Switch with 48 10/100/1000BASE-T Ports and BASE-X ports (SFP Req.) (Combo) (AC 110/220V, RPS DC -48V) Extended Modles for S A40X LSHM1XK1P3 H3C S port 10GE XENPAK Interface Modle,XENPAK Req. 0231A40Y LSHM1GP8P3 H3C S port 1000BASE-X SFP Interface Modle, SFP Req. 0231A41A LSHM1XP2P3 H3C S port 10GE XFP Interface Modle, XFP Req. SFPs for S A562 SFP-GE-SX-MM850-A 1000BASE-SX SFP Transceiver, Mlti-Mode (850nm, 550m, LC) 0231A563 SFP-GE-LX-SM1310-A 1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC) SFP-GE-LH40-SM BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC) SFP-GE-LH40-SM BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC) SFP-GE-LH70-SM BASE-LH70 SFP Transceiver, Single Mode (1550nm, 70km, LC) 0231A085 SFP-GE-T 1000BASE-T SFP 0231A453 SFP-GE-LH70-SM1470-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1470nm, 70km, LC) 0231A454 SFP-GE-LH70-SM1490-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1490nm, 70km, LC) 0231A455 SFP-GE-LH70-SM1510-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1510nm, 70km, LC) 0231A456 SFP-GE-LH70-SM1530-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1530nm, 70km, LC) 0231A449 SFP-GE-LH70-SM1550-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1550nm, 70km, LC) 0231A450 SFP-GE-LH70-SM1570-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1570nm, 70km, LC) 0231A451 SFP-GE-LH70-SM1590-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1590nm, 70km, LC) 0231A452 SFP-GE-LH70-SM1610-CW 1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1610nm, 70km, LC) 0231A11U SFP-GE-LX-SM1310-BIDI 1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1310/RX1490, 10km, LC) 0231A11V SFP-GE-LX-SM1490-BIDI 1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1490/RX1310, 10km, LC) XENPAKs for S A363 XENPAK-SX-MM850 10GBASE-SR XENPAK Modle, Mlti-Mode (850nm, 300m, SC) 0231A323 XENPAK-LX-SM GBASE-LR XENPAK Modle, Single Mode (1310nm, 10km, SC) 0231A324 XENPAK-LH40-SM GBASE-ER XENPAK Modle, Single Mode (1550nm, 40km, SC) XFPs for S A494 XFP-SX-MM850 10GBASE-SR XFP Modle, Mlti-Mode (850nm, 300m, LC) 0231A438 XFP-LX-SM GBASE-LR/LW XFP Modle, Single Mode (1310nm, 10km, LC) 0231A72X XFP-LH40-SM1550-F1 10GBASE-ER/EW XFP Modle, Single Mode (1550nm, 40km, LC)

10 10 H3C S5600 Spare Power Modle for S A41E LSHM1S130H H3C S C 130W Standard Power Spplier 0231A41F LSHM1S180H H3C S C 180W Standard Power Spplier 0231A40V LSHM1P24PH H3C S C-PWR PoE Power Spplier(Optional) 0231A40W LSHM1P48PH H3C S C-PWR PoE Power Spplier(Optional) Stack cables for S A41B CAB-F1STK-65cm-H3 H3C S5600 Series Stacking Cable-65cm 0231A41C CAB-F1STK-120cm-H3 H3C S5600 Series Stacking Cable-120cm 0231A41D CAB-F1STK-5m-H3 H3C S5600 Series Stacking Cable-5m RPS1000-A3 for S A01S AC-RPS1000-A3 Redndant Power Spply, 2 PSU slots, with 1 PSU1500 modle and 5 connector cables 0213A01G AC-Flatpack1500-M Power Spply Unit with 600W (AC 110V) or 1450W (AC 220V) (optional) 0404A053 CAB-RPS PoE-2m-JD5 Cable A with JD5 type connector (optional) RPS500-A3 for S5600 Non-POE Switches 0213A01T AC-RPS500-A3 RPS500-A3 Power with 125W/12V otpt and 375W/48V otpt 0404A03U CAB-Pwr-1m-PS3FP-II RPS500-A3 Power cable U SPARE DC CABLE for S A00E CAB-DC Pwr-2m-F1 S5600 Non-PoE Switch DC Power Inpt Cable-2m (only for S5624P/S5648P/S5624F) (optional) Visit for more information abot H3C enterprise soltions. Copyright 2009H3CTechnologies,Co., Ltd. All rights reserved.h3cand theh3clogo are in varios contries worldwide registered trademarks of H3C Technologies Co., Ltd., a sbsidiary of 3Com Corporation. TippingPoint is in varios contries worldwide a registered trademark of TippingPoint Technologies, Inc., a sbsidiary of 3Com Corporation. All other company and prodct names may be trademarks of their respective companies.while every effort is made to ensre the information given is accrate, neitherh3c or 3Com accepts liability for any errors or mistakes which may arise. All specifications are sbject to change withot notice. 01/2008