ST332B ADSL2+ Tester

Transcription

1 ST332B ADSL2+ Tester

2 ST332B ADSL2+ Tester Chapter One: Introduction Chapter Two: Layout Chapter Three: Main Specifications Chapter Four: Functions Chapter Five: Operation

3 Chapter One: Introduction ST332B tester is multi-functional hand-held ADSL2+ test instrument with small size, specially designed for xdsl line test (xdsl include: ADSL, ADSL2, ADSL2+ READSL etc) and maintenance. It provides xdsl test, PPPoE/PPPoA dial test, DMM test, Modem emulation, ping test,data upload and so on. The tester adopts LCD display and menu operation which can display the test results directly and improve the xdsl broadband service greatly. It s the best choice for the field operators of installation and maintenance.

4 Key Features: Test objects: ADSL2+; ADSL;ADSL2;READSL Multifunction: Physical layer test; Modem emulation ; PPPoE/PPPoA dial ; DMM test; Ping test; Browse IP address information; Remote upgrade Judge the quality of service by four grades Data memory capacity: 50 records LCD display Menu operation Selectable vehicular charger Simple, portable and money-saved

5 Chapter Two: Layout

6 On key 2. Off key 3. Weaken contrast key 4. Deepen contrast key 5. Down key 6 Up key 7. Enter key 8. Back key 9. LCD 10. Backlight key 11. Ethernet LED 12. PPPoE LED 13. Link LED 14. Power LED 15. LAN Port 16. Charge Port 17. xdsl Port LED introduction ETH LED: Shining: Ethernet link in normal condition. Flicker: There is data flux in Ethernet. Link LED: LED flicker slowly: finding central office, LED flicker rapidly: xdsl Modem is doing the xdsl handing; Shining: Link connected and work normally. PPPoE LED: Shinning, successful PPPoE dialing;

7 Chapter Three: Functions Main functions xdsl Test PPPoE/PPPoA Dial Test DMM Test Ping Test Modem Emulation Modem Parameters setting WAN Ping and LAN Ping Test Work Mode Specifications Physical Layer parameters PPPOE/PPPoA Dial and display IP information AC/DC Voltage, loop resistance, insulation, capacitance,meaure Distance Emulate Modem Purpose Test the physical parameters on the line Validate user s PPPoE/PPPoA dial OK or Not Test electric parameters of circuitry You can judge the WAN connecting and LAN connecting state. Judge whether user s Modem Ok or Not Work Mode of ModemADSL/ADSL2+ Data storage and upload Management Software 50 groups records and upload to computer management software Set VPI/VCI and others Save (50groups)and read physical layer parameters Mange the test records and data.

8 Chapter Four: Main Specifications Technical specifications of physical layer 1. Standards: ITU G (G.dmt), ITU G (G.lite), ITU G.994.1(G.hs), ANSI T1.413 issue #2, ITU G.992.5(ADSL2+) Annex A& L 2. Maximal connecting distance is 6.5kmCompatible with ADSL, ADSL2 and READSL ; 3. DSL up/down max speed; 4. DSL up channel speed: 01.2Mbps; 5. DSL down channel speed: 024Mbps 6. DSL up/down attenuation: 063.5dB; 7. DSL up/down noise margin: 032dB; 8. DSL up/down output power3231.5db 9. Error test for CRC, FEC, HEC, NCD, LOS; 10. Display the channel bit chart. 11. Display DSL connection mode; 12.Determine the service quality Excellent, Good, Ok, Poor

9 PPPoE/PPPoA Dial and WAN/LAN Ping You can fulfill the function of Perform PPPoE /PPPoA dialing to user twisted-pair (WAN port) through fixed PPPoE/PPPoA test account. After successful dialing, it could get this terminal IP, opposite terminal IP, chiefly DNS server IP and subordinate IP address. Modem Parameters Setting Operator can set current modem standard and choose ADSL2Plus Auto or Multi mode. What is more, operator can also revise PPPoE properties (PAP/CHAP), user name and password through background management software. Modem Emulation ST332B can emulate the user Modem completely. Operators can take ST332B as user s modem, and dial to logon Internet to test if there is any problem of the Modem. DMM Test ST332B can test such items as follows: AC Voltage: 0 to 400 V; DC Voltage: 0 to 290 V; Capacitance:0 to 1000nF, Loop Resistance: 0 to 20KΩ;

10 PING test It can perform the WAN PING Test and LAN PING Test. LAN PING Test can judge if the connection with IP addresses success or not and also confirm LAN work OK or not. WAN PING test can Ping website addresses directly toward Local WAN, and check the connectivity of WAN Line. Data upload Users can upload data to PC trough RS232 port, which is convenient for users to save and manage the data.

11 Chapter Five: Operation 1.Modem Initialization 2.System Setting 3.Physical Layer Test 4.PPPOE/PPPoA Dial 5.Modem Emulation 6.WAN/LAN Ping Test 7.DMM Test 8.Upload and Background Management Software

12 1. Modem Initialization Firstly the tester will initiate the Modem. Normally it will be successful in initializing and enter the menu display. Like the picture 2. If the initializing is failed the Modem will retry it. And if it still can not initialize Modem it will display Failed. Enter menu? If you press Enter key to enter the system main operation menu the only thing you could do now is View Data. Modem Initializing >>>>>>>>>>> Failed. Enter Menu? xdsl Test DMM Test Dial Test LAN Ping View Data Modem Emu Sys Set Upload

13 2. System Setting xdsl Test DMM Test Dial Test LAN Ping View Data Modem Emu Sys Set Upload Mode Unchanged Please Exit failure xdslmode Set ADSL2+ Mode ADSL MultiMode Setting.. Please Wait. succeed Config succeed ADSL2+ ModeIf the mode be selected, the Modem will be in the ADSL2+ self-adapting mode ADSL MultiMode If selected, the Modem will be set in ADSL mode

14 3.Physical Layer Test 3.1 Operation Press or to move the cursor to the xdsl Test option and press Enter key to enter the xdsl test window. xdsl Test DMM Test Dial Test LAN Ping View Data Modem Emu Sys Set Upload Testing... Please Wait State: Lingking Qos: Standard: Multimode Service qualityfour levels (Excellent, Good, OK and Poor.)

15 3.2 Display records State: Linking QoS : Link Mode: Adsl2Plus Auto State: Showtime QoS : OK Link Mode: G. dmt Up Rate : 0 kbps Dn Rate : 0 kbps Max Rate U : 0 kbps Max Rate D : 0 kbps Up Rate: 512 kbps Dn Rate: 2048 kbps Max Rate U : 912 kbps Max Rate D : 8308kbps Up Atten: 0.0 db Dn Atten: 0.0 db Noise Mar U : 0.0 db Noise Mar D : 0.0 db Up Atten: 13.5 db Dn Atten: 27.0 db Noise Mar U : 15.0 db Noise Mar D : 27.5 db Output PU: 0.0 db Output PD: 0.0 db CRC u: 0 CRC d: 0 Output PU: 12.3 db Output PD: 19.4 db CRC u: 0 CRC d: 0 HEC u: 0 HEC d: 0 FEC u: 0 FEC d: 0 HEC u: 0 HEC d: 0 FEC u: 2 FEC d: 0 NCD u: 0 NCD d: 0 LOS u: 0 LOS d: 0 NCD u: 0 NCD d: 0 LOS u: 0 LOS d: 0

16 Display bit chart After above records show,press Key, the bit chart From 102 channels to 512 channels will be displayed one by one. Press Back key to return to the main menu. The number of channel bit chart will be different due to the difference of user line.

17 3.3 Save test records Save record? Enter:Save Back:Exit Exit Save Saved Record No.:15 xdsl Test DMM Test Dial Test LAN Ping View Data Modem Emu Sys Set Upload If don t want to save the record, press Back to back to the main interface. If need to save the record, press Enter and then the record number will be displayed as the above pic.

18 4. PPP Dialing Setting Self : Peer: DNS1: DNS2: Self : Peer: DNS1: DNS2: The tester has 7 groups VPI/VCI values. Only when tested line s VPI/VCI is same as any one of the 7 groups you could perform PPPoE/PPPoA dialing. The system will succeed in dialing if you enter correct username, password and authorization method. And now the PPPoE/PPPoA LED will be shinning.

19 5. Modem Emulation 1. When ST332B is in operation, it could be used as xdsl Modem. And user could make dialing or logon the Internet by ST332B to see if there is any fault in user Modem. 2. During Modem emulation the ST332B works under RFC1483 Bridge mode. 3. Please confirm the dialing is in Stop state before you make dialing or logon Internet. If not, please revise it at first.

20 6. WAN/LAN Ping test LAN Ping WAN Ping Result 4 packets transmitted 4 packets received 0 loss IP DMM Test Press DMM Test you will see the test items: xdsl Test DMM Test Dial Test LAN Ping View Data Modem Emu Sys Set Upload DC(V) Test: mv AC (V) Test: mv LR Test:: Ω Cap Test: nf Ins Test: M Ω

21 8.Background Management Software Background manage software Senter xdsl test management software is the management software of ST332B, read real-time data, parameter setting, read and save the record and record analyses functions to help you conveniently and efficiently use this tester.

22 Software contents: 1. Physical Layer Test Display Modem physical layer information

23 2. VPI/VCI Modify Modem VPI/VCI parameters

24 3. Modify the information of authentication modify user name, password, authentication mode and DSL configuration

25 4. Data statistics

26 5. Channel bit chart

27 6.Ping

28 THANKS VERY MUCH FOR YOUR ATTENTION.