1 AT&T DEFINITY Communications System Generic 2 ISDN 7505, 7506, and 7507 Terminals User's Guide
2 NOTICE While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, AT&T can assume no responsibility for any errors. Changes or corrections to the information contained in this document may be incorporated into future issues. TO ORDER COPIES OF THIS DOCUMENT Contact: Order AT&T Customer Information Center 2855 North Franklin Road P.O. Box Indianapolis, IN , In Canada: Document No Issue 1, October 1989 For more information about AT&T documents, see Business Communications Systems Publications Catalog ( ). HEARING AID COMPATIBILITY This equipment is compatible with the inductively coupled hearing aids prescribed by the Federal Communications Commission (FCC). Prepared by The AT&T Documentation Management Organization Winston-Salem, NC AT&T All Rights Reserved Printed in USA
3 Contents Your ISDN Terminal What the Features Do How to Use the Features Abbreviated Dialing Automatic Callback Bridging Call Coverage Call Forwarding Busy/Don't Answer Call Forwarding Follow Me Call Park Call Pickup Call Waiting Conference Drop Hold Intercom (Automatic Dial) Last Number Dialed Leave Word Calling (LWC) Message Mute
4 Priority Calling Select Ring Self-Test Send All Calls Speakerphone Transfer Voice Message Retrieval Tones and Their Meanings Key Words to Know Quick Reference Lists
5 Your ISDN Terminal Your ISDN terminal is designed so that you can conveniently use the many features of the AT&T DEFINITY Communications System Generic 2. Familiarize yourself with your terminal shown in Figure 1 and explained on the following page
6 7507 Figure 1. ISDN Terminals 1
7 Call appearance/feature buttons Redial button Select button Mute button Speaker button Volume button Transfer button At least 2 of these buttons are devoted to handling incoming and outgoing calls (call appearances) and are labeled with an extension number; the remainder are call appearances or access features (feature buttons) and are labeled with a feature name. Each button has a red light and a green light. For redialing the last voice number dialed. Used to access a second level of features on the Redial, Drop Test, Transfer Clock, and Conference Ring and secondary feature buttons. Press to have a conversation at your end without the person at the far end hearing. Mute works with both the handset and the Speakerphone. If your terminal is programmed with a Speakerphone or SPOKESMAN loudspeaker, this button is used to turn the speaker on or off. When on a call, used to decrease or increase the volume of the handset speaker, Speakerphone loudspeaker, or the SPOKESMAN loudspeaker. When not on a call, used to decrease or increase the ringer volume. For transferring a call to another voice terminal.
8 Hold Button Conference button Drop button Message light Dial pad Handset Adjunct jack Line jack For putting a call on hold. For setting up conference calls. For disconnecting from a call or dropping the last party added to a conference call. A green light that comes on steadily when a message has been left for you. The standard 12-button touch-tone pad for dialing the telephone numbers and accessing features. For placing and answering calls (also known as the receiver). In most cases you must lift the handset (go off-hook) before you can use a feature. Located on the bottom of your terminal near the front edge. This jack is used for connecting a speakerphone or a headset adapter and headset to your terminal. A Speakerphone symbol ( ) appears beneath the jack. Located on the back of your terminal. This jack is used for connecting a line cord to your terminal. The jack is labeled LINE. 2
9 What the Features Do Here are brief descriptions of 23 voice features, including what each one does and how you might want to use it. You will have the Conference, Drop, Hold, Message, Mute, Redial, Select Ring, Self-Test, and Transfer features. In addition, you may have many of the other features listed here; your System Manager can advise you. Abbreviated Dialing Allows you to store selected telephone numbers as 3 digits or less for quick and easy dialing. Each number can be a complete or partial telephone number, an extension number, or a trunk or feature code. There are 3 possible types of lists personal, group, and system and you can have a total of 3 lists. Numbers on a personal list are programmable by you; numbers on all other lists are programmable only by the System Manager. Use as a timesaver for dialing frequently called, lengthy, or emergency numbers. Note: Check with your System Manager concerning what types of lists you have and how many of each. Automatic Callback Sends you a special 3-burst ring tone indicating that a previously busy extension is now available. Use to avoid constant redialing when you wish to speak to someone who is frequently busy on the telephone. Note: Can be used only for extensions, not outside numbers.
10 Bridging Permits you to answer or join in calls to someone else s extension by pressing a bridged appearance button on your terminal. This button can be any call appearance button labeled with another user s primary extension number, as assigned to you by your System Manager. Use to assist in handling calls for a designated co-worker. Call Coverage Provides automatic redirection of certain calls to your terminal for answering. (Your System Manager determines which calls will be sent to you.) Use to answer calls for other extensions for whom you provide coverage. Call Forwarding All Calls Temporarily forwards all your calls to another extension or to an outside number, depending on your system. Use when you will be away from your voice terminal and you want your calls to be forwarded to a telephone number of your choice. Call Park Puts a call on hold at your voice terminal, for retrieval at any extension. Use when you need to go elsewhere to get information during a call, or whenever you wish to continue a call from a different location. Also, if the call received is for someone else, use it to hold the call until the called party can answer it from the nearest available telephone. Call Pickup Lets you answer a call at your voice terminal for another extension in your pickup group. Use when you wish to handle a call for a group member who is absent or otherwise unable to answer. Note: You can only use this feature if you and the called party have been assigned to the same pickup group by your System Manager. 3
11 Conference Allows you to add a third party to a call, so that you can conduct a 3-way conversation. (If you wish to conference more than 3 parties, call your attendant for assistance.) Use to set up time-saving conferences, or to spontaneously include a third party important to a discussion. Note: If you have both an active call and a call on hold, you must terminate one of them before you can use Conference. Drop Disconnects from a call without requiring you to hang up the handset or press the switchhook. Can also be used with the Conference feature to disconnect the last party added. Use whenever you are using the handset and want to continue using it for another action after ending a call. Hold Puts a call in a holding state until you can return to it. While a call is on hold, you can place another call, activate another feature, answer a waiting call, or leave your voice terminal to do another task. Use when you have a call that you don t wish to drop, but which you have to interrupt briefly to do something else. Intercom Gives you quick access to specified extensions. With Automatic Intercom, you can call a predetermined partner by pressing a single feature button. With Dial Intercom, you can call any member of a predetermined group of users by pressing a feature button and then dialing the group member s 2- or 3-digit code. Use to rapidly dial frequently called numbers. Last Number Dialed (Redial) Automatically redials the last number you dialed, either an extension or an outside number. Use to save time in redialing a busy or unanswered number.
12 Leave Word Calling (LWC) Leaves a message for another extension to call you back. The called party will be able to dial Message Center, AUDIX, or a covering user to retrieve a short, standard message which gives your name and extension, the date and time you called, and the number of times you called. Use any time you wish to have someone call you back; it will help cut down on repeated call attempts. Message Your Message light comes on to let you know that a caller has left a message for you. You can then follow your System Manager s local message retrieval procedures to get your message. Mute Lets you have a conversation at your end without the person at the far end hearing. Mute works with both the handset and the Speakerphone. Priority Calling Allows you to call another extension with a distinctive 3-burst ring to indicate that your call requires immediate attention. Use when you have important or timely information for someone. Redial See Last Number Dialed Select Ring Allows you to select your own personalized ring from among 8 available ringing patterns. Use to distinguish your ring from that of other nearby voice terminals. Self Test Activates the lights and ringer of your voice terminal. Use when you want to test their operation. 4
13 Send All Calls Temporarily sends all your calls to the extension of a person designated to answer them when you cannot (perhaps a secretary or receptionist). Use when you will be away from your desk for awhile, or when you do not wish to be interrupted by telephone calls. Speakerphone Allows you to place calls or access other features without lifting the handset. Use any time you prefer hands-free communication, or for group listening. SPOKESMAN Loudspeaker Allows you to monitor call progress (hear touch-tone digits as they are dialed, ringing, and the called party answer) and listen (only) to a conversation. Use for group listening. Transfer Transfers a call from your voice terminal to another extension or outside number. Use when your caller needs to speak further with someone else. Note: Calls from an outside number to your voice terminal can be transferred only to an extension, not to another outside number. Voice Message Retrieval Gives you messages (via computerized voice) left for you through Leave Word Calling or as entered by a covering user. If authorized by your System Manager, you may also retrieve messages for one or more of your co-workers. Use to hear all messages received while you were away.
14 How to Use the Features The procedures which follow give short, step-by-step instructions for using each of the features. For your convenience, features are listed alphabetically. Special Instructions The first time you use these procedures, you will need to customize them for yourself by following the directions. Your System Manager can supply the information required. To the right of each feature name is a box. For each feature that you have, mark a [ ] in the blank box as a reminder. (Voice features Conference, Drop, Hold, Message, Select Ring, Self-Test, and Transfer are already marked for you.) To use a voice feature you must have the handset off-hook unless you are instructed to remain on-hook in the procedures. You can activate and cancel most of the voice features by dialing 2- or 3-digit codes (if they are not already assigned to a button). In the blanks provided within the procedures, write in the feature code numbers. Note: If you receive an intercept tone (high-pitched, alternating high and low tone) while attempting to operate any feature, you have taken too much time to complete a procedural step or have made a dialing error. Hang up or press Drop, get dial tone, and begin again at Step 1. 5
15 Conventions The following conventions are used in the procedures: Gray Type xxxxx Feature and Feature xxxxx [handset tone] Procedural steps in gray type are steps that you should follow if you do not have a button assigned for the feature. This box represents a call appearance button which is used exclusively for placing, receiving, or holding calls. The button has a red light and a green light and is labeled with an extension number (shown as xxxxx ). Each of these boxes represents a button that has a feature assigned to it. The button is labeled with the feature name, sometimes followed by an extension number or a person s name (shown as xxxxx ). The tone that appears in brackets after a step indicates what you should hear from your handset after successfully performing that step. For a list of tones and their meanings, see the section titled Tones and Their Meanings. For a list of glossary terms, see the section titled Key Words to Know.
16 Quick Reference Lists At the end of this booklet is a set of quick reference lists. Use them to record your feature and trunk codes, Abbreviated Dialing personal list items, and frequently called miscellaneous extensions. Once you have completed the lists, flip to that page as needed, or make a photocopy and keep it handy. 6
17 Abbreviated Dialing Note: If you hear the intercept tone while programming, start from the beginning. Abbreviated Dialing buttons must first be assigned by your System Manager. To program or reprogram an outside number, extension, or feature access code into a personal list On a separate sheet of paper, jot down the outside numbers, extensions, and/or feature codes you want to program as items on your personal list(s) (see example to the left) Press Program or Dial Abbreviated Dialing Program code [confirmation tone] Dial personal list access code Dial desired list item number (0-9, 00-95, depending on list size) [dial tone] Dial outside number, extension, or feature access code you want to store (up to 35 digits) Press [ # ] Number is stored [confirmation tone] Press Drop and begin again at Step 1 to program additional items on the same list or to program another personal list Hang up or press Drop to end programming
18 Note: Record your personal list items on the Abbreviated Dialing list in the back of this booklet; group and system lists are available from your System Manager. To place a call using a 1 Press Personal List or Group List or System List personal, group, or system or Dial appropriate Abbreviated Dialing List code: list Personal Group [dial tone] System 2 Dial desired list item (1, 2, 3..., 01, 02, etc.) Stored number is automatically dialed 7
19 Automatic Callback To automatically place 1 Press Auto Callback and dial extension another call to an [confirmation tone] extension that is busy Green light comes on until callback is completed or canceled Note: If you send your calls to coverage, you cannot activate Automatic Callback. 2 Hang up (within 7 seconds) or press Drop You will receive a 3-burst priority ring when both your voice terminal and the called extension are idle 3 Lift handset when you hear priority ring [ringback tone] A call is automatically placed to extension, which receives regular ringing Note: Only one Automatic Callback call at a time can be placed, and Automatic Callback is canceled after 20 to 40 minutes if the callback call is not made (called party still busy).
20 To cancel Automatic Callback 1 Press Auto Callback again or Dial Automatic Callback Cancel code [confirmation tone] Green light goes off Bridging To answer a bridged call 1 Press xxxxx of bridged call Note: If your voice terminal has Ringing Appearance Preference, this step is not necessary; you will automatically be connected to the call when you lift the handset. 2 Pick up handset To prevent other bridged 1 Press Exclusion xxxxx while connected to the call terminals from entering a call (on a per call basis) Note: Pressing Exclusion xxxxx again reactivates bridging. 8
21 Call Coverage To answer a call for a 1 Press xxxxx of incoming call when ring begins or co-worker for whom you green light flashes are a coverage point Note: The call is not at your voice terminal until the light is flashing. To leave a message for a 1 Press Coverage Callback while connected to the call co-worker to call the [confirmation tone] original caller s extension Note: To leave a message for a co-worker to call you, activate Leave Word Calling instead.
22 To talk privately with 1 Press Transfer [dial tone] co-worker after answering Call is put on hold a redirected call 2 Press Consult or Dial co-worker's extension [priority ring to co-worker] Note: You can privately discuss call; if co-worker is not available, press the fluttering xxxxx to reconnect to call. 3 Press Transfer again to send call to co-worker or Press Conference Ring to make it a 3-party call 9
23 Call Forwarding Busy/Don't Answer To program Call 1 Press Call Forward Forwarding Busy/Don t or Dial Call Forward Busy/Don t Answer code Answer [dial tone] 2 Dial extension where calls will be sent [confirmation tone] Note: If you hear intercept tone, you are attempting to forward your calls to a restricted telephone or one with Call Forwarding Follow Me activated or you are attempting to forward your calls to a telephone in another partition or group (if you are in a tenant services environment). See your System Manager. 3 Hang up or press Drop
24 To cancel Call 1 Press Call Forward again Forwarding Busy/Don t or Dial Call Forward Cancel code Answer [confirmation tone] 2 Hang up Your calls will ring at your own voice terminal again 10
25 Call Forwarding Follow Me To temporarily redirect all 1 Press Call Forward calls to an extension of or Dial Call Forward Follow Me code your choice [dial tone] 2 Dial extension or number where calls will be sent [confirmation tone] Calls can only be forwarded to another extension, not to an outside number (see your System Manager) Note: You may hear a ring-ping tone for each call forwarded after you have activated this feature and hung up; also, some voice terminals may have restrictions on where calls can be forwarded. See your System Manager. To cancel Call 1 Press Call Forward Forwarding Follow Me or Dial Call Forward Cancel code [confirmation tone]
26 Call Park To park a call (for 1 retrieval at any extension) Press Transfer Second party is put on hold [dial tone] Press Call Park or Dial Call Park trunk code Dial the Call Park zone number [dial tone] Dial an idle answer-back channel number [confirmation tone] Press Transfer Hang up [ringback tone] Held party is transferred to the answer-back channel and hears ringback tone (or music) while waiting To retrieve parked call 1 Dial Call Park Answer-Back code [dial tone] from any extension 2 Dial channel number that call was parked against [confirmation tone] Note: If you receive intercept tone, parked call has been disconnected or retrieved by another party. 11
27 Call Pickup To answer a call to a 1 Press Call Pickup member of your pickup or Dial Call Pickup code group when your voice You are connected to ringing call terminal is idle To answer a call to your 1 Press Hold pickup group while on Present call put on hold another call 2 Press an idle call appearance 3 Press Call Pickup or Dial Call Pickup code Called voice terminal stops ringing [dial tone] You are connected to ringing call Note: To return to held call after completing present call, press fluttering xxxxx.
28 Call Waiting To answer a call waiting 1 Complete present call and hang up [ringing] tone Receive ringing from waiting call (1 internal, 2 outside, 3 priority) 2 Pick up and answer To answer a call waiting 1 Press Hold [recall dial tone] tone, putting present call Present call put on hold on hold 2 Dial Call Waiting answer/hold code You are connected to waiting call Note: You can return to first call by pressing the Hold button. 12
29 Conference To add a third party to a 1 Press Conference Ring [dial tone] call Present call put on hold and you are given a new call appearance 2 Dial number of third party and wait for answer Note: You can privately discuss the call with the third party at this time; if no answer or busy, press fluttering xxxxx to return to the original party. 3 Press Conference Ring again All parties now connected To add a call you ve put 1 Press Conference Ring [dial tone] on hold to another call Held call light flutters; active call light remains you re connected to on 2 Press xxxxx of call on hold 3 Press Conference Ring again
30 To drop third party 1 Press Drop You remain connected to original party 13
31 Drop To disconnect from a 1 Press Drop normal call, or to drop the last party added to a Note: Parties other than the last one must conference call disconnect to be released from the conference call.
32 Hold To keep a call waiting 1 Press Hold while you answer another Green light flutters call, make a call, or perform some other task Note: If you put a conference call on hold, the other parties remain connected. To answer a new call 1 Press Hold while active on another Green light flutters 2 Press xxxxx of incoming call You are connected to incoming call To return to held call 1 Press xxxxx of held call You are connected to held call Note: If you are active on a call and you press the xxxxx of the held call, the active call will be dropped. 14
33 Intercom To make a call to your 1 Press Icom Auto xxx predetermined Automatic Special intercom ring is sent Intercom partner [dial tone] To dial a call to a member 1 Press Icom Dial [dial tone] of your Dial Intercom 2 Dial group member s 1- or 2-digit code group [ringback tone] Special intercom ring is sent To answer any intercom 1 Pick up handset call You are connected to call Note: If you are active on another call, first press Hold, then press flashing xxxxx.
34 Last Number Dialed To automatically redial 1 Press Redial the last number you Number is automatically dialed (up to 32 digits) dialed (extension, outside number, or trunk/feature Note: Pressing the Redial button without lifting code) the handset automatically activates the Speakerphone or SPOKESMAN loudspeaker. Note: Your voice terminal is equipped with a Redial button which is similar in function to the Last Number Dialed feature. Limitations on this feature should be noted. Digits dialed via Abbreviated Dialing, feature dial codes, authorization codes, and SMDR account codes may or may not be retained in memory and may have to be redialed for each call. Check with your System Manager. 15
35 Leave Word Calling (LWC) To leave a message after Note: To do this, you must have a LWC button dialing an extension 1 Press LWC any time after you complete dialing (when call is not [confirmation tone] answered, or you hear a coverage or busy tone, or Message light comes on called voice terminal you have been put on (if equipped) hold) Note: If reorder tone is heard, message is not stored; try again. 2 Hang up or press Drop To leave a message 1 Press LWC without ringing an or Dial Leave Word Calling code extension [dial tone] 2 Dial extension [confirmation tone] Message light comes on called voice terminal (if equipped) 3 Hang up or press Drop
36 To cancel a Leave Word 1 Press Cancel LWC Calling message (you or Dial Leave Word Calling Cancel code [dial tone] cannot cancel messages for an AUDIX subscriber) 2 Dial extension [confirmation tone] Message is deleted Note: If reorder tone is heard, message is not deleted; try again. 16
37 Message To retrieve a message 1 On 7506 or 7507, press MSG Retrieval when your Message light 2 Move through the messages with the following is on buttons: Next for next message Scroll to scroll through messages Delete to delete displayed message ReturnCall to place a call to the extension being displayed 3 Press Normal to end message retrieval and restore voice terminal to normal operating mode Green Normal light comes on Ask your System Manager for local retrieval methods or
38 Mute To mute your handset 1 Press Mute speaker or the Green light comes on Speakerphone Current call is muted (far end cannot hear you) To remove mute 1 Press Mute again Mute light goes off Conversation can resume Note: Switching from the handset to the Speakerphone while the Mute feature is on will automatically turn the Mute feature off. The same is true for switching from the Speakerphone to the handset. 17
39 Priority Calling To place a priority call 1 Press Priority (3-burst ring) or Dial Priority Calling Code [dial tone] 2 Dial extension 3 Wait for called party to answer To change a regular call 1 Press Priority into a priority call Called party receives a priority call waiting tone (3-burst) when you hear a (3-burst) call waiting ringback tone 2 Wait for called party to answer Note: If you still receive a call waiting ringback tone, wait a few minutes and try again.
40 Select Ring To select a personalized 1 ring Press Select (while on-hook) Green light comes on Press Conference Ring Current ring pattern plays To hear the next pattern, press [ * ]; listen to the ring Repeat Step 3 until you hear the ring pattern you want Press [ # ] when you hear the desired ring pattern The set gives two rising tones and returns to the calling mode. Your new ring pattern is saved Note: If you receive a call, go off-hook, or lose power during selection, process is interrupted and you must repeat from Step 1. If you lose power after you have selected your personalized ring, your ring pattern will be saved. 18
41 Self-Test To test the lights and 1 ringer of your voice terminal Press Select (while on-hook) Green light comes on Press Drop Self-test begins If the test passes, the following will occur; proceed to Step 3 You will hear periodic tones if the test is proceeding correctly The green Message light comes on Once you have heard a tone, you can press each button that has a light(s). The green light comes on indicating the button works correctly Lift the handset; the green light will flutter. Press each button on the dial pad [tones in handset] After the last button press, press the Select button, then press the Drop button to exit and return to the calling mode
42 6 Hang up the handset If the self-test fails, or if it passes but your set is not working properly, contact your System Manager Note: If you do not press the Select and Drop buttons, the set automatically exits self-test 30 seconds after the last button press. 19
43 Send All Calls To send all incoming calls 1 Press Send All Calls (while on-hook or off-hook) (except priority calls) or Dial Send All Calls code immediately to an [confirmation tone] assigned extension, AUDIX, or Message Note: You may hear a ring-ping tone as each call Center for coverage is sent to coverage. See your System Manager. To cancel Send All Calls 1 Press Send All Calls again (while on-hook or off-hook) or Dial Send All Calls Cancel code [confirmation tone] Your calls ring at your own voice terminal again
44 Speakerphone To place/answer a call 1 without lifting the handset, or to use speakerphone with any 2 feature 3 Press Speaker Green lights come on Speaker and xxxxx Place or answer call, or access selected feature Adjust speakerphone volume with Volume button Press Speaker again to hang up Green lights go off To prevent party from 1 Press Mute hearing you Green light comes on and party cannot hear you 2 Press Mute again to resume talking to party Green light goes off To change from 1 Lift handset and talk speakerphone to handset Green light on Speaker goes off 20
45 To change from handset to speakerphone 1 Press Speaker Green light on Speaker comes on 2 Hang up handset
46 Transfer To send present call to 1 Press Transfer [recall dial tone] another extension or Present call put on hold outside number 2 Dial extension or number that call is to be transferred to [ringback tone] Remain on line and announce call if desired; if no answer or number dialed is busy, return to held call by pressing its xxxxx 3 Press Transfer again Call is sent to the dialed extension or number Note: Only calls from another extension can be sent to an outside number; you cannot transfer a call from an outside number to another outside number. 4 Hang up or press Drop 21
47 Voice Message Retrieval To retrieve your voice 1 Dial the Voice Message Retrieval code (while messages when your on-hook or off-hook) [dial tone] Message light is on 2 Press [ # ] [voice prompting] Note: Do not press [ # ] if calling from someone else's extension; instead, dial your own extension number and (if prompted) your security code. 3 Move through the messages with these dial pad buttons: (Press [ # ] to retrieve first message) [ # ] NEXT (read next message) [ * ] [ 3 ] DELETE (erase from storage) [ * ] [ 4 ] HELP (request assistance) [ 2 ] [ 3 ] REPEAT (read message again) [ 8 ] CALL (call back named extension) Note: When you call back an extension with [ 8 ], be sure to also delete the message with [ 3 ] either before you place the call or after you complete it; otherwise, the message will remain in storage.
48 4 Hang up or press Drop to end Voice Message Retrieval To retrieve voice messages 1 for a co-worker Dial Voice Message Retrieval Coverage code (while on-hook or off-hook) [dial tone] Dial co-worker s extension [dial tone] Dial co-worker s security code also, if prompted Note: The security code must be dialed within 10 seconds or you will receive an intercept tone. Begin again at Step 1 if this happens. Move through the messages with dial pad buttons previously listed Hang up or press Drop to end Voice Message Retrieval 22
49 Tones and Their Meanings Ringing tones are produced by an incoming call. Handset tones are those which you hear through the handset (receiver). Ringing Tones 1 ring A call from another extension. 2 rings A call from outside or from the attendant. 3 rings A priority call from another extension, or from an Automatic Callback call you placed. ring-ping (half ring, not repeated) A call redirected from your voice terminal to another because Send All Calls or Call Forwarding Follow Me is active. Handset Tones busy tone A low-pitched tone repeated 60 times a minute; indicates the number dialed is in use. call waiting ringback tone A ringback tone with a lower-pitched signal at the end; indicates that the extension called is busy, but the called party has been given a call waiting tone.
50 call waiting tone One, two, or three beeps of high-pitched tone, not repeated; indicates an incoming call is waiting to be answered. Number of beeps designates the source: 1 for an internal call, 2 for an outside or attendant call, 3 for a priority call. confirmation tone Three short bursts of tone; indicates a feature activation or cancellation has been accepted. coverage tone One short burst of tone; indicates your call will be sent to another extension to be answered by a covering user. dial tone A continuous tone; indicates dialing can begin. intercept/time-out tone An alternating high and low tone; indicates a dialing error, a denial of the service requested, or a failure to dial within a preset interval (usually 10 seconds) after lifting the handset or dialing the previous digit. recall dial tone Three short bursts of tone followed by a steady dial tone; indicates the feature request has been accepted and dialing can begin. reorder tone A fast busy tone repeated 120 times a minute; indicates all trunks are busy. ringback tone A low-pitched tone repeated 15 times a minute; indicates the number dialed is being rung. 23
51 Key Words to Know activate To begin or turn on the operation of a feature. attendant The person who handles incoming and outgoing calls at the main telephone console. AUDIX Audio Information Exchange, an optional voice mail and message service which provides coverage for calls to you by recording callers messages and reporting Leave Word Calling messages. call appearance A button used exclusively to place, receive, or hold calls. It has an assigned extension number and is equipped with a red light and a green light. console appearance The authorization (from your System Manager) to initiate Call Forwarding All Calls for an extension other than your own. coverage Automatic redirection of calls from an unanswered voice terminal to another voice terminal. Redirection could be to the extension of a receptionist, secretary, co-worker, AUDIX, or message center. A person who provides coverage is a covering user. DEFINITY Communications System Generic 2 The AT&T switch to which you are connected. It transmits and receives voice and data signals for all communications equipment in your network. dial pad The 12 pushbuttons you use to dial a number and access features.
52 extension A dialing number of 3 to 5 digits assigned to each voice terminal connected to your DEFINITY Generic 2. feature A special function or service, such as Conference, Hold, Send All Calls, etc. feature code A dial code of 1 to 4 digits, which you use to activate or cancel the operation of a feature. group list One of the 3 types of Abbreviated Dialing lists; programmable by the System Manager or a controller of the list. Contains telephone numbers useful to members of a specific group, and stored as a 1- or 2-digit list item, depending on the number of members in the list. handset The handheld part of the voice terminal which you pick up, talk into, and listen from. Also known as the receiver. message retriever for other users. A person authorized by the System Manager to retrieve messages off-hook When the handset is removed from the cradle (for example, when you lift the handset to place or answer a call). on-hook When the handset is left on the cradle. party A person who places or answers a call. 24
53 personal list One of the 3 types of Abbreviated Dialing lists; programmable by the System Manager or by you, the user. Contains telephone numbers of your choice, and stores each of them as a 1- or 2-digit list item, depending on the number of members in the list. personal list item One of the 10 available slots on an Abbreviated Dialing personal list. The first 9 personal list items are given digits 1 to 9, with 0 for the tenth item. (Additional list items may be available. See your System Manager). pickup group A group of up to 25 telephone users who can answer calls for each other through the Call Pickup feature. Group members are determined by the System Manager and are usually located in the same work area or perform similar job functions. priority call An important or urgent call which sends a special 3-burst ring. program reprogram To use your dial pad to assign a telephone number to a personal list item for Abbreviated Dialing. Programming is activated by dialing an access code. retrieve To collect telephone messages with the Message or Voice Message Retrieval features. (Also, with Call Park, to resume a call from an extension other than the one where the call was first placed or received.) ringer The device that produces the electronic ringing sound in your voice terminal. Ringing Appearance Preference If your voice terminal is assigned Ringing Appearance Preference, you will automatically be connected to an incoming call when you lift the handset. You do not have to press a call appearance button.
54 stored number A telephone number which has been programmed and stored as a 1-, 2-, 3-, or 4-digit list item for use with Abbreviated Dialing. It can be a complete or partial telephone number, an extension number, or a trunk or feature code. Once programmed, a number can be accessed by first dialing the list, then the list item digit(s) under which it is stored. If the number is stored on an AD xxxxx button, the number can be accessed by simply pressing that button. switch The device which makes connections for all voice and data calls for a network, and also contains software for features. Also known as a system, switching system, or PBX (private branch exchange). (Your switch is an AT&T DEFINITY Communications System Generic 2.) system list One of the 3 types of Abbreviated Dialing lists; programmable only by the System Manager. Contains telephone numbers helpful to all system users, and stores each of those numbers as a 2-digit to 4-digit list item. System Manager The person responsible for specifying and managing the operation of features for all the voice and data equipment in your network. trunk A telecommunications channel between your DEFINITY Generic 2 and the local or long distance calling network. Trunks of the same kind connecting to the same endpoints are assigned to the same trunk group. trunk code A dial code of 1 to 4 digits which you dial to access a trunk group to place an outside call. voice terminal A telephone equipped with an array of specifically designed features (for example, self-test mode, administrable buttons, etc.) and functional capabilities that distinguish it from a conventional telephone. 25
55 Quick Reference Lists Feature Codes Feature ABBREVIATED DIALING Personal Group System Program CALL FORWARDING BUSY/DON T ANSWER Cancel CALL FORWARDING FOLLOW ME Cancel CALL PARK Answer Back Code Feature Code CALL PICKUP CALL WAITING LAST NUMBER DIALED LEAVE WORD CALLING Cancel Print Messages PRIORITY CALLING SEND ALL CALLS Cancel VOICE MESSAGE RETRIEVAL Coverage
56 Trunk Codes Description Code Item No. Abbreviated Dialing Personal List 1 Personal List Miscellaneous Description Extension Message Attendant
DEFINITY Communications System Generic 2 and System 85 7410 Plus Voice Terminal User's Guide Contents Your 7410 Plus Voice Terminal A Quick Look at the Features How to Use the Features Abbreviated Dialing
AT&T DEFINITY Communications System Generic 1 and Generic 3 ISDN 8510T Voice Terminal User's Guide NOTICE While reasonable efforts were made to ensure that the information in this document was complete
AT&T DEFINITY Communications System Generic 2 and System 85 7406BIS Voice Terminal User's Guide NOTICE While reasonable efforts were made to ensure that the information in this document was complete and
AT&T DEFINITY Communications System Generic and Generic and System 75 7444 Voice Terminal User's Guide NOTICE While reasonable efforts were made to ensure that the information in this document was complete
AT&T DEFINITY Communications System Generic 2 and System 85 8410 Voice Terminal User's Guide NOTICE While reasonable efforts were made to ensure that the information in this document was complete and accurate
DEFINITY Communications System Generic 2 and System 85 8434DX Voice Terminal User s Guide 555-104-767 Comcode 107985525 Issue 2 October 1997 NOTICE While reasonable efforts were made to ensure that the
Avaya one-x Deskphone Value Edition 1616 IP Telephone End User Guide 1616 IP Telephone End User Guide 1 P age Table of Contents About Your Telephone... 3 1616 IP Telephone Button/Feature Descriptions...
Avaya 9640 IP Telephone End User Guide 9640 IP Telephone End User Guide 1 P age Table of Contents About Your Telephone... 3 9640 IP Telephone Button/Feature Descriptions... 3 Scrolling and Navigation...
6402 Voice Terminal User s manual DEFINITY G3 - Release 6.3 or later 555-230-757 Issue 1, July 2000 Copyright 2000 Lucent Technologies All rights reserved Notice While reasonable efforts were made to ensure
AT&T System 25 Multiline Telephone User Guide 1989 AT&T All Rights Reserved Printed in USA TO ORDER COPIES OF THIS DOCUMENT REFER TO DOCUMENT NUMBER 555-540-703. Contact: Your AT&T sales representative,
AT&T System 25 Direct Trunk Attendant Console. User Guide 1989 AT&T All Rights Reserved Printed in USA TO ORDER COPIES OF THIS DOCUMENT REFER TO DOCUMENT NUMBER 555-540-701. Contact: Your AT&T sales representative,
About Your Telephone The 6402D is a single-line telephone with conventional touch-tone dialing and a 16-character display. To familiarize yourself with the buttons and features on your telephone, refer
DEFINITY Enterprise Communications Server Generic 2 and System 85 8434DX Voice Terminal Quick Reference 555-104-768 Comcode 107985517 Refer to the procedures on this card to use the features on your 8434DX
AT&T MERLIN COMMUNICATIONS SYSTEM ATTENDANT S GUIDE: MODELS 1030 AND 3070 WITH FEATURE MODULE 3 Table of Contents Getting Started Three Groups of Callers Your Console Small Attendant Console (illustration)
6408-6416 - 6424 Voice Terminal User s manual DEFINITY G3 - Release 6.3 or later 555-230-758 Issue 1, July 2000 Copyright 2000 Lucent Technologies All rights reserved Notice While reasonable efforts were
AT&T MERLIN COMMUNICATIONS SYSTEM TM USER S GUIDE: MODELS 1030 AND 3070 WITH FEATURE MODULE 1 Table of Contents Available Features Key to Symbols Placing and Answering Calls Placing Calls Outside Calls
AT&T MERLIN COMMUNICATIONS SYSTEM ATTENDANT S GUIDE: MODELS 1030 AND 3070 WITH FEATURE MODULE 5 MERLIN COMMUNICATIONS SYSTEM ATTENDANT S GUIDE: MODELS 1030 AND 3070 WITH FEATURE MODULE 5 Copyright 1986
6408+, 6408D+, 6416D+, 6416D+M, 6424D+, and 6424D+M Telephones User s Guide Contents 6400 Series Multi-line Telephones................... 5 Using the Softkeys................................ 8 Using the
555-540-702 Issue 1 1989 AT&T System 25 Single-Line Telephone User Guide 1989 AT&T All Rights Reserved Printed in USA TO ORDER COPIES OF THIS DOCUMENT REFER TO DOCUMENT NUMBER 555-540-702. Contact: Your
AT&T 555-530-701 Issue 1, June 1988 AT&T SYSTEM 25 DIRECT TRUNK ATTENDANT CONSOLE USER GUIDE 1988 AT&T All Rights Reserved Printed in USA TO ORDER COPIES OF THIS DOCUMENT REFER TO DOCUMENT NUMBER 555-530-701.
AT&T 555-530-702 Issue 1, June 1988 AT&T SYSTEM 25 SINGLE-LINE TERMINAL USER GUIDE 1988 AT&T All Rights Reserved Printed in USA TO ORDER COPIES OF THIS DOCUMENT REFER TO DOCUMENT NUMBER 555-530-702. Contact:
USER GUIDE 3300 ICP - 7.0 Contents ABOUT YOUR PHONE 1 For Users on Resilient 3300 ICP Systems 3 TIPS FOR YOUR COMFORT AND SAFETY 3 Don't cradle the handset! 3 Protect your hearing 4 Angle the phone for
555-520-706 Issue 1, June 1987 AT&T SYSTEM 25 SWITCHED LOOP ATTENDANT CONSOLE USER GUIDE 1987 AT&T All Rights Reserved Printed in USA TO ORDER COPIES OF THIS DOCUMENT REFER TO DOCUMENT NUMBER 555-520-706.
STANDARD TELEPHONE USER GUIDE SAMSUNG idcs 16 March 2005 Samsung Telecommunications America reserves the right without prior notice to revise information in this guide for any reason. Samsung Telecommunications
Business Communications Manager Telephone Feature User Guide 2004 Nortel Networks P0609371 01 March 24, 2004 Telephone button icons The Business Series Terminal (T-series) Feature button is a small globe
Enterprise Edge Telephone Feature Card 2000 Nortel Networks P0908931 Issue 03 Using Enterprise Edge features Using an Enterprise Edge feature Programming memory buttons 1. Press ƒ and enter the desired
Business Communications Manager Telephone Feature User Guide 2004 Nortel Networks N0008599 01 March 8, 2005 Telephone button icons Use this guide as a quick reference for accessing the features of your
MERLIN COMMUNICAIONS SYSEM AENDAN S GUIDE: MODEL 1030 AND 3070 WIH FEAURE MODULE 1 able of Contents age age Key to Symbols Attendant Console for a Small System Attendant Console for a Large System Before
Compact ICS Telephone Feature Card Buttons This card shows the Business Series Terminals buttons. The table below shows which buttons to use on the different types of Nortel Networks telephones. Button
Telephone Features User Guide BCM 4.0 Business Communications Manager Document Status: Standard Document Version: 03 Part Code: N0060608 Date: June 2006 Telephone button icons Use this guide as a quick
Norstar ICS Telephone Feature Guide About this guide Use this guide as a quick reference for accessing the features of your telephone. Your system administrator will inform you if any of these features
20 19 18 17 16 1 2 15 14 13 12 This guide will help you to understand and operate your new IP Phone. Please print this guide and keep it handy! 3 11 For additional information go to: http://www.bullseyetelecom.com/learning-center
M7324 Telephone User Card Your Norstar M7324 telephone Memory and line buttons are buttons with indicators for one touch dialing, feature operation or line access. Display shows the time, date, call information
AT&T 555-530-706 Issue 1, June 1988 AT&T SYSTEM 25 SWITCHED LOOP ATTENDANT CONSOLE USER GUIDE 1988 AT&T All Rights Reserved Printed in USA TO ORDER COPIES OF THIS DOCUMENT REFER TO DOCUMENT NUMBER 555-530-706.
2500 SET FEATURES (Analogue) CALL FORWARD: CALL PICK-UP: CONFERENCE 3: Notify the person you want to forward your calls to! Dial "#" key and "1" key plus extension number calls are to be forwarded to TO
Quick start guide 1040 4-Line small business system with speakerphone This quick start guide provides basic instructions For additional installation options and complete instructions that enable you to
Cal Poly Digital Telephone User Guide 1 2 Explanation of Button Functions Program: Initiates and ends the programming of features. Function Buttons: May be used to activate or cancel features, as userprogrammed
AT&T AT&T System 25 Switched Loop Attendant Console User Guide 1989 AT&T All Rights Reserved Printed in USA TO ORDER COPIES OF THIS DOCUMENT REFER TO DOCUMENT NUMBER 555-540-706. Contact: Your AT&T sales
Tips for Using the Directory To quickly find a name after accessing the Directory, press a number on the keypad that matches the first letter of the name for which you are looking. When entering numbers
Centrex User Guide (Version 2.0) 1. Welcome to CENTREX Welcome to CENTREX! We know you will be pleased with your new telephone service. You have selected a telecommunications system designed with you in
0992_CIB_1ATT_FINAL_022105 2/22/04 4:46 PM Page II User's Manual Part 2 Two-Line Speakerphone with Caller ID/Call Waiting 992 In case of difficulty, visit our Service Center at www.telephones.att.com or
Quick start guide 1070 4-Line small business system with caller ID/call waiting and speakerphone This quick start guide provides basic instructions. For additional installation options and complete instructions
System Speed Dial Account Codes List Most Often Used Codes List Most Often Used Codes Name Code Name Code 1. 1. 2. 2. 3. 3. 4. 4. 5. 5. 6. 7. 6. 7. 8. 8. 9. 10. 9. 10. 11. 11. 12. 13. 14. 12. 13. 14. 15.
AVAYA 9601 SIP DESKPHONE INSTRUCTIONS The following table provides button/feature descriptions for the 9601 deskphone. Name Description 1 Message Waiting Indicator An illuminated red light in the upper
TelNet OfficeEdge Complete Polycom VVX300 / 310 IP Phone. Reference Guide. IP Phone/Calling Features Voicemail Dialing Your Phone Calling Features To dial phone number or extension Lift your handset and
6400 Series Multi-line Telephones Quick Reference Cards Comcode: 108032178 CONTENTS 1 2 3 4 5 CONFERENCE, HOLD, and TRANSFER SELECT RING, REDIAL, SPEAKER, and TEST USING SOFTKEYS to ACTIVATE FEATURES FEATURE
MITEL 3300 IP Communications Platform 5304 IP Phone User Guide NOTICE The information contained in this document is believed to be accurate in all respects but is not warranted by Mitel Networks Corporation
DS 24D Digital Keyset Quick Reference Guide Samsung Means Business This QUICK REFERENCE GUIDE provides the basic operation of your Samsung DS 24D telephone. PLACING CALLS OUTSIDE CALLS - To place a call
Cordless II/Cordless Lite II Quick Reference Guide Using Your Telephone 0893408-2 Cordless II Phone Layout 8 Cordless Lite II Phone Layout ON OFF 1 2 3 4 HOLD 1 TALK CONF CHAN 2 abc TRANSFER REDIAL 3 def
STANDARD TELEPHONE USER GUIDE Release 1, 2, 3, and 4 COPYRIGHT 1992 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. All rights reserved. No part of this manual may be reproduced in any form or by any means graphic,
The list below features a description of each of the Custom Calling Features that we offer. There are bound to be several that you will find to be indispensable. Voice Mail When you are unable to answer
TelNet OfficeEdge Complete Polycom VVX400 Series IP Phone. Reference Guide. IP Phone/Calling Features Voicemail Dialing Your Phone Calling Features To dial phone number or extension Lift your handset and
TelNet OfficeEdge Complete Polycom VVX500 Series IP Phone. Reference Guide IP Phone/Calling Features Voicemail. Dialing Your Phone Calling Features To dial phone number or extension Lift handset and dial
NORTEL NORSTAR b*bbb*bb*bbb...b.*~ Compact DR5 Prime Telephone User Card l What is a Prime Telephone? Your role in operating a Prime Telephone A Prime Telephone can be any Meridian Norstar* telephone that
Call Manager Connection Thank you for selecting Call Manager Connection. It brings you a rich package of features to help manage your business at a great price! Basic package features These six time-saving
Table of Contents Getting Started 3 Using this Guide 3 Connecting Your Phone 4 Adjusting the Footstand / Handset Rest 5 Signing In to Your Phone 5 Choosing the Proper Headset 5 An Overview of Your Phone
CENTREX service user reference guide Clearly different. TABLE OF CONTENTS This user s guide provides instructions for using Centrex features. A check in the circle next to a feature means that your Centrex
AVAYA 9608 IP Phone QUICK REFERENCE GUIDE The phone supports 24 programmable call appearance/feature buttons. The labels for these are displayed in the main display and can be controlled by the adjacent
Comdial Digital Telephone System LCD Speakerphone System Reference Guide Applies to Impression LCD speakerphone models 2022S-xx Using the following software cartridges on a digital telephone system: I0408
Time (Day/Night/Lunch) Service This system supports the Day, Night and Lunch modes. The system operation for originating and receiving calls can be different in the day, night and lunch modes. Time Service
Telecommunication Systems Division Digital Business Telephone Systems Standard Telephone User Guide May 1999 Publication Information Toshiba America Information Systems, Inc., Telecommunication Systems
PROTEGÉ 616 Digital Hybrid Key System Keyset User Guide with display Mat Code 699050 SPRINT PRODUCTS GROUP HAS MADE EVERY EFFORT TO ENSURE THE TECHNICAL ACCURACY OF THIS GUIDE. FEATURES AND TECHNICAL DATA
Telephone operation Basic phone operation DO NOT DISTURB When you activate the Do Not Disturb (DND) function, you will not hear paging tones, voice paging, or incoming call rings. Instead, the LINE light
1 USER S MANUAL Part 2 Caller ID Telephone 962 Please also read Part 1 Important Product Information AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
This section describes how to operate your Cisco IP Phone and includes information on soft keys and phone features. Note Because there are differences in phone and site configurations, not all features
Avaya IP Office Phone Manual Contents 1 PHONES... 3 1.1 Overview of the 5402... 3 1.2 Overview of the 5410... 5 1.3 Overview of the 5420... 7 1.4 Overview of the 1403 / 1603... 9 1.5 Overview of the 1408
LET YOUR PHONE WORK FOR YOU. Custom Calling Features find us. call 939-6112 click htc.net TABLE OF CONTENTS General Information... 3 Features Overview... 4 Call Handling Features... 6 Call Waiting... 6
9 7 6 1 10 12 13 11 2/8 3 14 4 5 Table of Contents 1 General Information The following should be considered when reviewing this User Guide: Instructions are provided for the NEC Xen IPK digital telephones
AVAVA 9608 SIP DESKPHONE INSTRUCTIONS MESSAGE WAITING INDICATOR YOUR PHONE DISPLAY NAVIGATION ARROWS and the OK BUTTON 9608 PHONE INSTRUCTIONS If there are messages in your Avaya Voice Mailbox, the light
Panasonic DT543/546 Training Page 1 of 9 Page 2 of 9 ANSWERING/PLACING A CALL Answer a call: When your phone is ringing: Lift handset or press SP-PHONE for hands free Place an outside call: Lift handset
Hicom 300 Set T8 Operating Instructions Programme 2nd Transfer Transfer Return Transfer Call Forward Park Call Pickup Loudspeaker 1 2 3 4 5 6 + 7 8 9 - * 0 # Hicom 300 Digital User Guide Index Introduction...
System Speed Dial Numbers Record System Speed Dial numbers programmed only at extension 10 in the boxes below. To dial a System Speed Dial number: Press [ Feature ] followed by the Dial Code. Dial Dial
Auto Telecom 2000 CONTENT A. MAKING CALLS... 1 A.01 Inter Office Call (Intercom)... 2 A.02 Automatic Line Access (Trunk Group Access)... 2 A.03 Individual Line Access... 3 A.04 Flash (Open Loop Timed Flash)...