Connected Home Solutions

Transcription

1 Connected Home Solutions REPRESENTED LOCALLY BY INVICTUS SALES & MARKETING, LLC.

2 Eaton s home automation hub is a powerful gateway for your connected home. With a single app, it puts automation and energy management a touch away. Eaton s home automation hub provides homeowners, builders and electrical contractors with a single, smart home solution for integrated automation and energy management. Single app control: Manage lighting, security systems, locks, garage door openers, thermostats, cameras, entertainment networks, sensors and more. Security enabled: Integrate with popular security systems to simplify control. Simplified installation: Install the hub and Z-Wave based products with ad-hoc wifi capability and mobile app. User interface: The intuitive mobile app works across different eco-systems and supports voice control. Remote access: Allow users to access the system and connected devices away from home. Eaton s Home Automation Hub CONNECTING YOUR HOME Mobile and voice based control Single app control: Manage lighting, security systems, locks, garage door openers, thermostats, cameras, entertainment networks, sensors and more. WiFi Home Automation Hub is a powerful gateway for your connected home. With a single app, it puts automation and energy management a touch away. Thermostats Door locks Lighting controls Security Sensors Music systems Garage door openers 2 EATON

3 HOMECT Product description 120V/AC/c.a/CA; 50/60Hz power supply Design features Simple and quick installation App based local and remote control of hub and all devices connected to it AP/Ad-hoc WiFi mode for installation without an active internet connection Can be mounted on the wall or placed on a flat surface Powered by micro USB or Power over Ethernet (PoE). PoE injector sold separately Built-in WiFi and Z-Wave radios for connecting wide variety of devices Automatic over the air software updates to ensure the device is always up to date Support for configurable scenes, schedules and notifications (text and ) Auto discovery and simple setup of popular smart home products including lighting controls, thermostats, garage door openers, door locks, sensors and more Works with Eaton Home App (available for IOS and Andriod devices) Works with Amazon Alexa for voice based control Description Catalog no. Home Automation Hub HOMECT RF9540-NDW Home automation bundles Description Color Catalog no. with (2) Z-Wave Dimmers RF9540-NDW DW RF95KIT44 with (2) Z-Wave Switches RF9501DW DW RF95KIT11 with (1) Z-Wave Dimmer RF9540-NDW and (1) Z-Wave Switch RF9501DW DW RF95KIT41 with (2) Z-Wave Dimmers RF9540-NDW and (2) Z-Wave Switches RF9501DW DW RF95KIT4411 culus Listed UL 498 and UL1310; NOM certified RF9501DW Color information: DW (Decorator White) DW Decorator White Home automation bundles RF95KIT44 Hub + (2) RF9540-NDW RF95KIT11 Hub + (2) RF9501DW RF95KIT41 Hub + (1) RF9540-NDW and (1) RF9501DW RF95KIT4411 Hub + (2) RF9540-NDW and (2) RF9501DW REPRESENTED LOCALLY BY INVICTUS SALES & MARKETING, LLC. Compliances, specifications and availability are subject to change without notice. EATON 3

4 * We make what matters work.* At Eaton, we believe that power is a fundamental part of just about everything people do. Technology, transportation, energy and infrastructure-these are things the world relies on every day. That s why Eaton is dedicated to helping our customers find new ways to manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. To improve people s lives, the communities where we live and work, and the planet our future generations depend upon. Because that s what really matters. And we re here to make sure it works. See more at Eaton.com/whatmatters Visit our website: REPRESENTED LOCALLY BY INVICTUS SALES & MARKETING, LLC. Electrical Sector 203 Cooper Circle Peachtree City, GA United States Eaton.com Eaton.com/wiringdevices Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com 2017 Eaton All Rights Reserved Printed in USA Publication No. BR610022EN_V1 August 2017 Electrical Sector Canada Operations 5925 McLaughlin Road Mississauga, Ontario, L5R 1B8 Canada EatonCanada.ca Eaton.com/wiringdevices Eaton is a registered trademark. All other trademarks are property of their respective owners. Electrical Sector Mexico Operations Carr. Tlalnepantla - Cuautitlan Km 17.8 s/n Col. Villa Jardin esq. Cerrada 8 de Mayo Cuautitlan, Mexico CP Mexico Eaton.mx Eaton.com/wiringdevices Follow us on social media to get the latest product and support information.

5 Technical Data Effective August 2017 Project Name: Project Number: Catalog Number: Prepared By: Date: Type: Description The home automation hub is a powerful gateway for your connected home. From a single app, the hub can manage lighting controls, home security systems, door locks, garage door openers, thermostats, and more! HOMECT Design features Simple and quick installation App based local and remote control of hub and all devices connected to it AP/Ad-hoc WiFi mode for installation without an active internet connection Can be mounted on the wall or placed on a flat surface Powered by micro USB or Power over Ethernet (PoE). PoE injector sold separately Built-in WiFi and Z-Wave radios for connecting wide variety of smart home devices Automatic over the air software updates to ensure the hub is always up to date Support for configurable scenes, schedules and notifications (text and ) Auto discovery and simple setup of popular smart home products including lighting controls, thermostats, garage door openers, door locks, sensors and more Works with Amazon Alexa for voice based control Table 1. Catalog No. Description HOMECT * *Powered by micro USB or Power over Ethernet (PoE). PoE injector sold separately. Compliances, specifications and availability are subject to change without notice. REPRESENTED LOCALLY BY INVICTUS SALES & MARKETING, LLC.

6 Technical Data Effective August 2017 Project Name: Project Number: Catalog Number: Prepared By: Date: Type: Applications Eaton s home automation hub is designed to act as a single solution for home owners, home builders and electrical contractors looking for a smart home system that incorporates home automation & energy management. The home automation hub is designed to provide best in class user experience with Eaton s line of compatible home automation products. The hub also allows homeowners and installers to integrate variety of other popular smart home devices such as Nest thermostats, Amazon Echo, Kwikset locks, as well as security systems. By integrating the control of these various devices into a single app, we help simplify home automation experience for the homeowners. The hub is a powerful device that continues to let homeowners access their smart home even when the internet connection to the cloud is down. With ad-hoc WiFi capability, contractors can install the controller and Z-Wave based products in new home construction when there is no internet connectivity. With automatic firmware updates, Eaton ensures the hub is always current. This allows the device to have the latest features and fix any issues without service interruptions and expensive call backs. Eaton s Home Automation Hub CONNECTING YOUR HOME Mobile and voice based control Single app control: Manage lighting, security systems, locks, garage door openers, thermostats, cameras, entertainment networks, sensors and more. WiFi Home Automation Hub is a powerful gateway for your connected home. With a single app, it puts automation and energy management a touch away. Thermostats Door locks Lighting controls Security Sensors Music systems Garage door openers Eaton s home automation hub provides homeowners, builders and electrical contractors with a single, smart home solution for integrated automation and energy management. Table 2. Specifications Device Type Input Connections Computing Operating Environment Physical Dimensions Mounting Home Automation Hub Network: 1 Ethernet Port, 8 wire RJ45 with LED indicators for diagnostic 10/100/1000 BaseT Ethernet port Power: af POE or 5Vdc over micro USB USB: 2 USB 2.0 ports (for future connectivity) Connectivity: n Wi-Fi and MHz (Z-Wave) Processor: Quad Core 900MHz Memory: 1GB DDR2, 8GB flash Operating System: Linux Temperature: 41 to 113 F (5 to 45 C) Relative humidity: 10 to 90% (non-condensing) (W X H X D) 3.85 X 5.98 X 1.32 in (W X H X D) 3.85 X 5.98 X 1.32 in 2 EATON Compliances, specifications and availability are subject to change without notice.

7 Technical Data Effective August 2017 Project Name: Project Number: Catalog Number: Prepared By: Date: Type: Table 3. Compatible products Compatible access, lighting, sensors, and water devices can be added using the Eaton Home App. See the folowing for compatible devices. Manufacturer Lighting ControlsLighting Controls Device Type Model Eaton Z-Wave dimmers & accessory dimmers RF9540-N, RF9542-Z, RF9534, RF9536-N, RF9537-N Sensorsighting Controls Z-Wave switches & accessory switches Z-Wave scene controller Z-Wave tamper resistant receptacle Z-Waveplug-in moldules RF9501, RF9517, RF9518 RFWC5 RFTR9505-T Aeotec Multi Sensor DSB05 Door/Window Sensor Range Extender Recessed Door/Window Sensor Water Sensor RFAPM, RFLDM Fibaro Door/Window Sensor FGK-101, 102, 103, 104, 105, 106, 107 Access Controlighting Controls Flood Detection Sensor Motion Detection Sensor DSB29 DSD37 DSB54 DSB45 FGFS-101 FGMS-001 Kwikset Deadbolt 910, 912, 914, 916 Schlage Deadbolt BE369, BE468, BE469 Lever Yale Deadbolt YRD-110, YRD-120, YRD-220, YRD-240 FE599 Linear Garage Door Controller GD00Z Climate Controlighting Controls Clare Controls Thermostat CH-THSTAT-Z, CH-THSTAT-W, CH-TSB10-WF Waterighting Controls Thermostat/Humidistat CH-THSTAT-W Clare Controls Water Valve CH-WV01 Water Sensor and Freeze alarm CH-WWA-02-W Fibaro Flood Sensor FGFS-101 WaterCop Shut-Off Valve WCVLF Securityighting Controls Resolution Products Helix RE6100P We are always adding more devices to be compatible with our system. Please visit our website for the latest list of compatible devices. Compliances, specifications and availability are subject to change without notice. EATON 3

8 Technical Data Effective August 2017 Project Name: Project Number: Catalog Number: Prepared By: Date: Type: Table 4. Auto-discoverable devices Auto-discoverable devices include some popular smart home devices including CCTVs, video doorbells & music devices. These devices will automatically show up in your Eaton Home App as soon as they are installed on your device and are on the same WiFi network as the Eaton home automation hub. Manufacturer Device Type Model Climate Controlighting Controls Google Nest Learning Thermostat Generation 1, 2 & 3 Honeywell Thermostat Lyric T6 Pro Wi-Fi, Lyric T5 Wi-Fi, Lyric Round CCTV/Videoghting Controls Clare Controls 1 MP Indoor Wi-Fi Cube Camera with IR CVP-B1C50-IDIW 2 MP Indoor Pan and Tilt Camera with IR CVP-B2PT50 2 MP Indoor Wi-Fi Cube Camera with IR CVP-B2C50-IDIW 2 MP Low Profile Mini-Dome Camera with Wi-Fi CVP-B2D50-ODIW 2 MP Mini-Dome Camera CVP-B2D50-ODI 2 MP Turret Camera with Enhanced IR CVP-B2T50-ODI 2 MP Mini-Bullet Camera with IR CVP-B2B50-ODI 2 MP PTZ Pan/Tilt/Zoom Camera with IR CVP-M2PTZ50-ODI 4 MP Varifocal Bullet Camera with IR CVP-M4B50-ODI 4 MP Motorized Varifocal Dome Camera with IR CVP-M4D50-ODIM 4 MP Vairfocal Dome Camera with IR CVP-M4D50-ODI Video Doorbellighting Controls Clare Controls Video Doorbell CVP-B2DB50-ODIW Music hting Controls Denon Heos All models Sonos Sonos All models We are always adding more devices to be compatible with our system. Please visit our website for the latest list of compatible devices. Table 5. Color Ordering Information DW (Decorator White) Compliances, specifications and availability are subject to change without notice. REPRESENTED LOCALLY BY INVICTUS SALES & MARKETING, LLC. Electrical Sector 203 Cooper Circle Peachtree City, GA United States Eaton.com Eaton.com/wiringdevices Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com Electrical Sector Canada Operations 5925 McLaughlin Road Mississauga, Ontario, L5R 1B8 Canada EatonCanada.ca Eaton.com/wiringdevices 2017 Eaton All Rights Reserved Printed in USA Publication No. TD610076EN August 2017 Electrical Sector Mexico Operations Carr. Tlalnepantla - Cuautitlán Km 17.8 s/n Col. Villa Jardín esq. Cerrada 8 de Mayo Cuautitlán, México CP México Eaton.mx Eaton.com/wiringdevices Eaton is a registered trademark. All other trademarks are property of their respective owners.

9 FAQs - Frequently Asked Questions Eaton s Home Automation Hub 1. What is the? The is a powerful gateway for your connected home. From a single app which can be downloaded from the Apple App store or Google Play, the hub can manage lighting controls, home security, door locks, garage door openers, thermostats, and more! 2. What technology supports the? Eaton s supports Z-Wave and WiFi wireless protocols. The technology enables the hub to be compatible with Eaton s Z-Wave based wireless lighting controls as well as a host of other Z-Wave and WiFi based smart home devices. 3. What can the homeowner do with the? The homeowner can control compatible, installed residential products by setting up scenes and schedules and creating automations through the Eaton Home app. It also supports activated controls through Amazon Alexa. For example: Scenes: Configure a scene that locks the front door, turns ON the living room lights to 30% dim level, and sets the thermostat to 76. Automations: Create automations to initiate sensor based actions that enable your garage door to open and hallway lights to turn ON as you arrive home. Schedules: Set up a schedule through the Eaton Home app that enables your interior and exterior lights to turn ON at a precise time. Voice based control: Eaton s supports integration with Amazon Alexa to activate convenient voice commands such as turning lights ON and OFF, locking doors and simply adjusting thermostats. 4. What is the wireless range for the? Wireless range is dependent on many factors in a residential application, but a typical application may have a range of about 60 ft. For a Z-Wave installation, you can enhance the range of the hub by adding Eaton s Z-Wave Wireless devices at regular intervals as they all act as repeaters and help create a stronger mesh network. 5. How many times can a Z-Wave signal be repeated? A Z-Wave signal can be repeated up to a total of 4 times. That means a device can have up to 3 devices (already installed in the network) between itself and controller, unless it can directly be reached by the controller. 6. Will my connect to 5GHz network? No. The will only connect to 2.4GHz network 7. Where is the ideal location in the home to place the? The relies on wireless communication to talk to devices and control them. Just like your WiFi router, your hub should be placed centrally within the home network preferable at a slight elevation from ground. Avoid placing the hub in a cabinet or near anything that might interfere with its radio signal. 8. How does the Eaton Home app connect to my? The Eaton Home app connects to your using a cloud. The account that you create while setting up the app and the controller will be used by the cloud to access your system. 9. Does the support integration with Amazon Alexa, Google Home and IFTTT? Eaton s integrates with Amazon Echo and other Alexa enabled devices for convenient voice based control of your system. Currently Eaton s does not support integration with Google Home and IFTTT, but we are continuously adding features to the hub. Look for more information on this soon! 10. How many devices can I have on my network? Eaton s is a Z-Wave Plus certified gateway. A single Z-Wave network supports up to 232 devices but we recommend limiting a wireless network to around 100 devices for the most optimal experience. 11. What happens to my installed connected home devices when internet or power goes out? If your internet goes down but your WiFi network is still present, your will be able to control Eaton s Z-Wave devices and select other devices through your Eaton Home app. If your power goes out, your home automation bridge will not be able to communicate with the connected devices in your home. However, all the settings and associations will remain in the hub for you to seamlessly use once the power comes back. 12. What other devices does my work with? Eaton s seamlessly integrates with many popular smart home devices. Please visit for the most up to date list. Installation Guide Brochure Spec Sheet Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com Eaton s Wiring Devices Division 203 Cooper Circle Peachtree City, GA Eaton.com/wiringdevices 2017 Eaton All Rights Reserved Printed in USA Publication No. PA610004EN November 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.

10 Home Network Security Best Practices Security is top priority at Eaton. This document contains a brief description of how Eaton Home protects your security and some suggestions for keeping your home network secure. Eaton Home Eaton values the customer s security and has worked hard to make sure that the Eaton Home app is protected. SmartHome system PIN (personal identification number) Eaton Home secures app access through a PIN, assigned by default and the customized by the user. The default SmartHome PIN should be changed immediately after your first connection to the SmartHome with the app. To change the PIN, open the app and browse to Reset PIN (Settings > Configuration > Reset PIN), and then select a PIN that contains a combination of letters (upper and lowercase), numbers, and symbols. Avoid selecting an easily guessed PIN Consider changing your PIN every 30 to 90 days or after guests/installers access your smart home system. This prevents continued access from undesired users. Note: For added security, first time connections to the Eaton Home project with a user device (smartphone) must be made while on premises and connected to the LAN. Secure tokens for remote connections Eaton Home uses secure tokens for device connections. Thermostats, security devices, etc., all use tokens. These tokens are short lived and change regularly to ensure that connections are safe. Reverse proxy The Eaton Home app opens a secure encrypted tunnel to a cloud based system using authorized user provided credentials, to authenticate device communication in the home. The encrypted tunnel is created between the user s device and the Eaton Home app, no further communication is made to other internet services. Homeowner notified when their system is accessed using Pro Install app The homeowner is notified when a installer accesses their project using the Eaton s Pro Install app. This appears as pop-up notification on all connected Android smartphones or ios devices. This alerts the homeowner that their system is being accessed. So, no more blind updates or changes. The homeowner can contact the installer to learn about the changes. Controlled incoming connections The Eaton s only uses encrypted SSL (Secure Socket Layer) based protocols to communicate with client devices and the app. The hub initiates all connections and does not allow traffic over ports without valid credentials. This makes unauthorized devices unable to connect to your Eaton Home system. Home network security Not only do we care about Eaton Home security, but also general home network security. See the security suggestions below. Change your default router administrator password and username Most WiFi wireless routers and access points have a manufacturer set default admin username and password. This information is often simple and documented. If unchanged, this leaves you vulnerable to cybercriminals. These settings should be changed immediately. A secure router password should be at least 20 characters long and include a combination of numbers, letters (upper and lowercase), and symbols. Some routers allow remote access from the internet. Disabling this feature helps prevent hackers from connecting to your router on a device not on your wireless network. Choose a strong WiFi password Default router passwords are easy to guess when manufacturer information is known or available. A secure wireless password should be at least 20 characters long and include a combination of numbers, letters (upper and lowercase), and symbols. A complex password also discourages hackers from accessing your network to borrow your data. Use network encryption Do not use outdated encryption technology. WEP and WPA encryption are older and susceptible to hacking. WPA2 AES is the current secure standard, compatible with most modern routers and WiFi devices.

11 Home Network Security Best Practices Hide your network SSID If you do not need to broadcast your SSID, hide it. Most routers allow an admin user to disable the network broadcast feature. Change your network s default SSID Routers come with a default manufacturer WiFi name (SSID), often containing the manufacturer name. Broadcasting this manufacturer name makes it easier for hackers to exploit the known vulnerabilities of the router. The SSID name should be changed immediately and not include personal information (names, address, etc.). Do not make it easy for a hacker to guess which WiFi network is yours. Use guest networks on your router When possible setup a guest network with an SSID, password, and IP scheme different from the home s current SSID. This allows guests to connect to your home s internet, but can be disabled or changed as desired. For example when changing the IP scheme from /24, set the guest account to /24. Make the scheme different. This prevents access to on premises equipment isolating the network from guest access. Note: If a guest network will not be used, disable the guest network option so that it cannot be exploited. Strategically position your router Set up your router as close to the center of your home as possible. This maximizes your signal coverage while minimizing the signal strength outside of your house. A hacker can infiltrate your wireless network if it can be accessed from a neighboring house or outside on the street. Disable remote access Some routers allow remote access from the internet. Disabling this feature helps prevent hackers from connecting to your router on a device not on your wireless network. Keep your router s firmware/software up-to-date Router firmware/software may contain exploitable flaws. Ensure your router is running the latest firmware/software to minimize vulnerability to router exploits. Your router may support auto-updates, check for and enable the auto-update setting. Use a firewall Your router may include a network firewall. For added security, ensure that your network firewall is enabled. Contact Information Eaton Electrical Sector 203 Cooper Circle, Peachtree City, GA Call Technical Support (Eaton Care) at or techsupport@eaton.com Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com Eaton s Wiring Devices Division 203 Cooper Circle Peachtree City, GA Eaton.com/wiringdevices 2017 Eaton All Rights Reserved Printed in USA Publication No. TD610080EN November 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.

12 installation and setup guide is placed in a closed off area, the wireless signal strength may be compromised. Note: To prevent radio frequency (RF) interference, we recommend that you place the away from devices that may cause interference and away from grounded metals. Figure 1: HOMECT connections Description The Eaton Home Automation Hub (HOMECT) provides all device management services, supports Eaton Home user interface services, and acts as the gateway to the Cloud for system updates. The hub comes complete with the EatonOS preloaded. The controller also comes equipped with a Z-Wave (908.4 MHz) transceiver for controlling your other devices, such as integrated lighting, thermostats, sensors, and locks. Note: Models are subject to change without notice. WARNING: Any changes or modifications made to this product not expressly authorized by the manufacturer could void the user s right to operate this device. Unpacking the Home Automation Hub Remove all contents from the Hub packaging and ensure you have the following items. 1 (p/n HOMECT) 1 5v micro USB power supply (p/n ) 1 wall mounting kit (p/n ) o 1 wall mounting bracket (p/n ) o 2 long screws (8-32 5/16 ) (p/n ) o 2 short screws (6-32 3/4 ) (p/n ) 1 paper clip (p/n ) 1 Quick Start Guide 5 UUID/Mac identification labels WARNING: Do not apply power to the HOMECT until installation is complete. Failure to do so may result in bodily injury and/or damage to the equipment. Installation We recommend placing the in an open centrally located area within the home, and using the included wall mount to attach the to a standard single gang box. The should not be mounted in a structured enclosure, panel, or closet. If the (1) Recessed push button (2) 2 USB ports (3) Wire routing channel (4) Wall mount slots (5) Micros USB ports (6) Ethernet port

13 Powering on and connecting the HOMECT After installing the and downloading the Eaton App, power on the hub. The can be powered using PoE (sold separately) or the included 5v micro USB adapter. WARNING: You must follow the instructions below to power your. Failure to do so may result in bodily injury and/or damage to the equipment. To connect power to the HOMECT using PoE: Note: PoE connection requires two Ethernet cables, they are referred to as cable #1 and cable #2. 1. Plug an Ethernet cable (#1) into the Ethernet port on your. See Figure 2, item Plug the opposite end of the cable into the PoE injector (sold separately) port labeled POE. See, Figure 2, item Plug a separate Ethernet cable (#2) into the LAN port on the PoE injector. See, Figure 2, item Plug the opposite end of the Ethernet cable (#2) into an Ethernet port on your router. See Figure 2, item Plug the PoE power supply into the D/C port on the PoE injector. See Figure 2, item Plug the PoE power supply into a wall outlet. See Figure 2, items 6 and 5. Figure 2: HOMECT PoE connection (1) Ethernet cable #1 (1.1) Ethernet cable #1 connected to the HOMECT Ethernet port (1.2) Ethernet cable #1 connected to the PoE port on the PoE injector (2) Ethernet cable #2 (2.1) Ethernet cable #2 connected to the LAN port of the PoE injector (2.2) Ethernet cable #2 connected to the Ethernet port on router (3) HOMECT (4) PoE injector (5) Wall outlet (6) PoE injector power supply (6.1) PoE injector power supply cable (6.2) PoE power supply connected to the DC port (7) Wireless router To connect power to the HOMECT using the micro USB: 1. Plug the micro USB end of the power adapter into the micro USB port on the upper-right rear corner of the See Figure 3, item Plug the power adapter s opposite end into a wall outlet. See Figure 3, items 2 and Check the LED on the top edge of the Home automation hub. It flashes red until Wi-Fi is configured. See Figure 6, item 1. Figure 3: HOMECT 5v micro USB connection (1) HOMECT (2) 5v micro USB power supply (2.1) 5v micro USB power supply cable (2.2) 5v micro USB plugged in to the HOMECT micro USB port (3) Wall outlet Eaton Home setup After the s installation, setup the connection. There are two different setup options, PoE (Power over Ethernet) and Wi-Fi connection. Follow the steps according to how the is powered. To connect your HOMECT using PoE: Notes: If the s LED is not solid blue after 90 seconds, see Troubleshooting on page 4. Your Android or ios device must be connected to your home network. 1. Download and open the Eaton Home App. 2. Tap the Inventory icon, and then tap the Settings icon. 3. The Locations dialog displays. Select the displayed project. Note: The project displays as -- No project --. See Figure Enter the PIN 1234 as prompted. 5. Tap outside of the Locations dialog box. You are now ready to configure the project.

14 Figure 4: Eaton Home project display Configure, test, and deploy a project Refer to the following instructions on creating, testing, and deploying devices. You can deploy the devices through your Eaton Home app. Including Z-Wave device to Home Automation Hub: For the Eaton Home mobile application, follow the following steps: Tap the Inventory icon on the top right Select Devices from the Configure menu at the bottom of the screen Tap the Inventory icon from the bottom of the screen Select the category of device you want to add to the controller. E.g.: Lighting Name the device you want to add and select the area you want. Tap Continue Tap Start Discovery Mode to put the device in inclusion mode. Follow the instructions with your Z-Wave device to put that device in pairing mode. Follow the instructions on the screen to compete the inclusion process. Once the device has been included, the app will allow you to configure the device settings. You can tap < icon to exit to the main screen. Excluding Z-Wave device to Home Automation Hub: For the Eaton Home mobile application, follow the following steps: Tap the Inventory icon on the top right Select Devices from the Configure menu at the bottom of the screen Select the category of device you want to exclude from the network; the screen should show list of all the devices in that category. Tap next to the name of the device you want to exclude. Tap Remove from the drop down menu Tap Start Removal Mode to put the controller in exclusion mode. Follow the instructions with your Z-Wave device to put that device in exclusion mode. Follow the instructions on the screen to compete the exclusion process. Mounting the on a standard single gang box 1. Place the wall mount against a standard gang box. See Figure 5, items 1 and Align the long screws in the wall mount, and then fully screw them in. Repeat this with the short screws, stopping with enough room remaining to support the. See Figure 5, items 4 and Align the over the screws, and then slide it down, locking it in place. See Figure 5, item 6. Figure 5: wall mounting (1) (2) (3) Gang box Wall Wall mount (4) (5) (6) Short screws Long screws Understanding LED colors and the Home automation hub status The has LED indicators that change colors based on the s status. Once powered on, observe the s LED status. Figure 6 identifies the LEDs on the Home automation hub. Note: The Eaton Home connection can take up to 90 seconds. Wait the full 90 seconds before attempting to troubleshoot. Blue When the LED flashes blue in 1 second intervals, the device is booting normally. When the device is solid blue after booting up, the device is functioning properly. When the LED flashes blue in.5 seconds intervals, the HOMECT is unable to connect to the internet. Red/Blue Alternating: When the LED flashes red and blue in.5 second intervals, the is restarting in Access Point (AP) mode. Flashing in unison at.5 second intervals: The Home automation hub is updating.

15 Red/not lit When the LED flashes red in.5 second intervals, the is in AP mode. Note: When the controller is in AP mode, it creates its own wireless network. When the LED is red or not lit, see the troubleshooting steps on page 4. Figure 6: top-edge (1) LEDs - Illuminates solid blue when operating normally Trouble shooting steps When the is not functioning properly, use the LED table and troubleshooting steps below. LED display Blinking red in 2 second intervals Troubleshooting The is not connected to your local network. The Eaton Home connection may take up to 90 seconds. Wait the full 90 seconds before shutting off/rebooting the Home automation hub. Ensure that there is internet in the home, reset the router, and then shut down and restart the. Ensure that the SSID is correct. Shut down and restart the Home automation hub, re-enter the SSID, and wait for connection. To shut down the : 1. Locate the recessed push button on the Home automation hub. See Figure 1, item Insert the paper clip (provided) pressing the button down and holding for 5 seconds. See Figure Remove the paper clip and observe the LED behavior. The s LED indicators alternate red and blue signifying it has started shutting down. 4. After the shuts down, disconnect the s power supply. 5. Reconnect the power supply and verify that the restarts. Continue with installation and setup. To reset the and enter AP mode: 1. Locate the recessed push button on the Home automation hub. See Figure 1, item Insert the paper clip (provided) pressing the button down and holding for 20 seconds. See Figure Remove the paper clip and observe the LED behavior. The s LED indicators alternate red and blue signifying it has entered the reboot state. 4. Once the boots and the LED flashes red in.5 second intervals, it is in AP mode. Continue with installation and setup. Note: If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable. Figure 6: Paper clip pressing the recessed push button Solid red Not lit Eaton OS is not operational. Check the network connectivity. If there is no connection, restart the network. If there is connection, shut down and restart the Home automation hub. There is no power connected to the, or the is shut down. Check the power supplies are plugged in and wired correctly. Other things to check when troubleshooting: Ensure that the home has internet connection. If the SSID menu closes before it has successfully connected, you must shut down and restart the. If the problem persist after following the troubleshooting steps, please contact tech support.

16 Specifications I/O ports USB 2 General Processor Operating system Memory Power Operating temperature Broadcom ARM7 Linux 1 GB DRAM, 8 GB Flash 3.5 W (700 ma at 5 VDC) 41 to 113 F (5 to 45 C) Relative humidity 10 to 90%, non-condensing Dimensions (W x H x D) 3.85 x 5.98 x 1.32 in. (9.77 x x 3.35 cm) Installation and Setup Guide: Scan code to view the installation & setup guide for more information. Contact information Eaton Electrical Sector 203 Cooper Circle, Peachtree City, GA Call Technical Support (Eaton Care) at or techsupport@eaton.com Regulatory information Manufacturer: Eaton Electrical Sector 203 Cooper Circle, Peachtree City, GA FCC compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warranty information Eaton offers a two (2) year limited warranty on original Eaton components, from the date of shipment from Eaton. To view complete limited warranty details, including limitations and exclusions, Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com Eaton s Wiring Devices Division 203 Cooper Circle Peachtree City, GA Eaton.com/wiringdevices 2017 Eaton All Rights Reserved Printed in USA Publication No. TD610079EN October 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.

17 Product Details Troubleshooting Additional Information and Support (1) (5) LED Indicators LED Display Solid Blue Troubleshooting Everything is working correctly. Installation and Setup Guide: Scan code to view the installation & setup guide for more information. Home Automation Hub (2) (6) Blinking Red in 2 second intervals Solid Red Not Lit Blinking Red and Blue The hub is not connected to your home network. Shutdown and power cycle the hub. ControllerOS is not operational. Shut down and power cycle the hub. There is no power connected to the hub. Check that the power supplies are plugged in and wired correctly. Firmware update in progress. It can take up to 5 minutes. Warranty Information Eaton offers a two (2) year limited warranty on original Eaton s Home Automation Hub components, from the date of shipment from Eaton. To view complete limited warranty details, including limitations and exclusions, visit Scan the code above to view product warranty details. Support Quick-Start Guide When the hub reboots, it can take up to 25 seconds to successfully restart in *AP mode. For technical issues and additional support, please contact Eaton Care at: techsupport@eaton.com or by phone (866) (3) (4) To shut down the hub, use the provided paper clip to press and hold the recessed push button down for 5 seconds. For more information visit: (1) Recessed push button (4) Wall mount slot (2) 2 USB ports (5) Micro USB port (3) Wire routing channel (6) Ethernet port To shut down hub and power cycle in AP mode, use the provided paper clip to press and hold the recessed button down for 20 seconds. *AP mode: when the hub is broadcasting local WiFi for installation purposes. Eaton Peachtree City, GA

18 Thank You! In today s competitive market place, we understand that you have many choices for your home automation needs. Thank you for choosing Eaton s Home Automation Hub. Installation Option 1: WiFi To connect to Eaton s Home Automation Hub you must have the Eaton Home App, and access to your home s WiFi. Step 6 - Reconnect your Android or ios device to your home WiFi, and then re-open the Eaton App. a. Tap, and then tap. b. Select the project No project (EatonHome). c. Enter the PIN 1234 when prompted. d. Tap outside of the Locations box or tap Done. You are now ready to use your hub. b. The Locations dialog displays. Select the displayed project. Note: The project displays as No project (EatonHome). c. Enter the PIN 1234 as prompted. d. Tap outside of the Locations box or tap Done. You are now ready to use the hub. Included in the Box Installation Option 2: Power over Ethernet To Mount the Hub to Wall Hub Mounting bracket and screws Recommended Tools Micro USB power supply UUID/Mac identification labels Optional: Power over Ethernet (PoE) injector (Not included, purchased separately. Part #: RFPOE) #2 Phillips head screwdriver (for installing mounting bracket) Needle nose pliers (for inserting micro USB plug into the hub) Paper clip Quick Start Guide Step 1 - Use pliers to plug USB power supply into hub. Step 2 - Plug USB power supply into wall outlet. Step 3 - Download the Eaton Home App from the Apple App Store or Google Play Store. Step 4 - Open the Eaton Home App & connect your Android or ios device to the Eaton Access Point WiFi (EatonWiFi-XXXX) through the WiFi settings menu on your device. Note: XXXX represents the last 4 characters of the unit s MAC address. It can take up to 2 minutes for the Eaton WiFi to appear. Step 5 - Open the Eaton Home App. a. Enter the home s WiFi SSID and password, tap Next. b. Follow the displayed instructions. c. Wait for the LED to become solid blue, this can take up to 90 seconds. Note: If the LED does not change to solid blue, see the Additional Troubleshooting panel or the Installation and Setup Guide. (PoE injector requires separate purchase Part #: RFPOE). To connect to Eaton s Home Automation Hub you must have the Eaton Home App, and access to your home s WiFi. Simple Setup Using Wired Connection Step 1 - Connect the hub to the PoE injector Step 2 - Connect the injector to the router, and then connect the injector to the power supply. Step 3 - Download, and then open the Eaton Home App. a. Tap, and then tap. Step 1 - Attach the mounting bracket to the gang box. Step 2 - Plug in the hub, and then slide it on to the mounting bracket. Note: Do not throw away the micro USB power supply used for WiFi, it may be required for other features. If the hub fails to connect see the Installation and Setup Guide, scan the QR code below. Installation and Setup Guide: Scan code to view the installation & setup guide for more information. (steps continued...) (steps continued...)

19 Home Automation Hub - integrated devices list Compatible access controls, lighting, sensors, and water devices can be added using the Eaton Home and Pro Install app. See the following for compatible devices. Manufacturer Lighting ControlsLighting Controls Device Type Model Eaton Z-Wave dimmers & accessory dimmers RF9540-N, RF9542-Z, RF9534, RF9536-N, RF9537-N Sensorsighting Controls Z-Wave switches & accessory switches Z-Wave scene controller Z-Wave tamper resistant receptacle Z-Waveplug-in moldules RF9501, RF9517, RF9518 RFWC5 RFTR9505-T Aeotec Multi Sensor DSB05 Door/Window Sensor Range Extender Recessed Door/Window Sensor Water Sensor RFAPM, RFLDM Fibaro Door/Window Sensor FGK-101, 102, 103, 104, 105, 106, 107 Access Controlighting Controls Flood Detection Sensor Motion Detection Sensor DSB29 DSD37 DSB54 DSB45 FGFS-101 FGMS-001 Kwikset Deadbolt 910, 912, 914, 916 Schlage Deadbolt BE369, BE468, BE469 Lever Yale Deadbolt YRD-110, YRD-120, YRD-220, YRD-240 FE599 Linear Garage Door Controller GD00Z Climate Controlighting Controls Clare Controls Thermostat CH-THSTAT-Z, CH-THSTAT-W, CH-TSB10-WF Waterighting Controls Thermostat/Humidistat CH-THSTAT-W Clare Controls Water Valve CH-WV01 Water Sensor and Freeze alarm CH-WWA-02-W Fibaro Flood Sensor FGFS-101 WaterCop Shut-Off Valve WCVLF Securityighting Controls Resolution Products Helix RE6100P We are always adding more devices to be compatible with our system. Please visit our website for the latest list of compatible devices. See reverse side for Auto-discoverable devices

20 Home Automation Hub - integrated device list Auto-discoverable devices include some popular smart home devices including CCTVs, video doorbells & music devices. These devices will automatically show up in your Eaton Home app as soon as they are installed on your device and are on the same WiFi network as the Eaton home automation hub. Manufacturer Climate Controlighting Controls Device Type Model Google Nest Learning Thermostat Generation 1, 2 & 3 Honeywell Thermostat Lyric T6 Pro Wi-Fi, Lyric T5 Wi-Fi, Lyric Round CCTV/Videoghting Controls Clare Controls 1 MP Indoor Wi-Fi Cube Camera with IR CVP-B1C50-IDIW Video Doorbellighting Controls 2 MP Indoor Pan and Tilt Camera with IR CVP-B2PT50 2 MP Indoor Wi-Fi Cube Camera with IR CVP-B2C50-IDIW 2 MP Low Profile Mini-Dome Camera with Wi-Fi CVP-B2D50-ODIW 2 MP Mini-Dome Camera CVP-B2D50-ODI 2 MP Turret Camera with Enhanced IR CVP-B2T50-ODI 2 MP Mini-Bullet Camera with IR CVP-B2B50-ODI 2 MP PTZ Pan/Tilt/Zoom Camera with IR CVP-M2PTZ50-ODI 4 MP Varifocal Bullet Camera with IR CVP-M4B50-ODI 4 MP Motorized Varifocal Dome Camera with IR CVP-M4D50-ODIM 4 MP Vairfocal Dome Camera with IR CVP-M4D50-ODI Clare Controls Video Doorbell CVP-B2DB50-ODIW Music hting Controls Denon Heos All models Sonos Sonos All models We are always adding more devices to be compatible with our system. Please visit our website for the latest list of compatible devices. Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com Eaton s Wiring Devices Division 203 Cooper Circle Peachtree City, GA Eaton.com/wiringdevices 2017 Eaton All Rights Reserved Printed in USA Publication No. PA610005EN October 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.