INNOV.NET PTY LTD. User guide

Transcription

1 User guide 0

2 Contents Compatibility... 1 What s in the package?... 1 Add device... 2 Legend... 2 Meaning of the LED indicators... 2 Setup the RM Mini Setup e-control on your smartphone... 3 How to pair a remote control with a RM Mini 3 from your smartphone?... 5 Can I program a remote control using the Internet session while the Wi-Fi router is turned on?... 5 Can I add a new device of BroadLink using the Internet session?... 5 FAQ... 5 Technical specification Contact us: Compatibility: iphone, ipad, ipod and Android devices. For Apple devices it requires ios 6.0 or latest. Language support: English, French, Hebrew, Japanese, Portuguese, Russian, Chinese, Spanish, and Vietnamese. What s in the package? RM Mini 3 x 1 and a user guide. 1

3 Add device Legend newly added device. Wi-Fi signal. remote control device is online. remote control device is offline. Meaning of the LED indicators. a) Blue LED flashes rapidly: The device is in configuration mode (SmartConfig ) and waiting for setup. This mode is enabled after the device is powered on for first time or you long press the reset button. b) Blue LED flashes every second: The device configuration is failed. This is usually caused by incorrect input of password. Please reset the device and try again. c) Blue LED flashes blink for 4 times and stop for 1 sec. and repeats the cycle: The device is in AP configuration mode. This mode is enabled after you long press the reset button when the device is already in configuration mode. d) Off: The device is configured successfully. You can view the device shortcut icon in the main control page or tap the + icon on top right corner and then choose Device list to view the device. 2

4 Setup the RM Mini 3 * You need the Wall mount USB power adaptor and RM Mini 3. * Connect the USB cable to your RM Mini 3 as shown below. * Plug in the RM Mini 3 into the USB wall mount AC adaptor (5V DC and 500mA) * Plug into the General Purpose Outlet (GPO) and turn on the GPO. * The blue light on the RM Mini 3 will be constantly flashing as shown below: This mean the RM Mini 3 is ready to pair the device. If the blue light is stationary, rest it by using a paper clip as shown below: Press and hold the reset button for 3 seconds and release it then the light will start flashing rapidly. * Turn on the Wi-Fi router. Setup e-control on your smartphone * Download the e-control software from your App Store (ios) or Google Play (Android). * Ensure your smartphone is connected to your Wi-Fi network. 3

5 * Open the e-control application and tap the + icon on top right corner then choose Add device. * In the configuration page, the Wi-Fi SSID should be filled automatically and you just need to input the password of your Wi-Fi network to start the configuration. If configuration failed, reset the device. * Once the e-control detected the device, the eremote will automatically displayed on the Device list. * Tap on the eremote and commence pairing your remote control devices. Note: The password of your Wi-Fi network will be saved and you will never need to input the password the next time when you configure the devices. Control panel explanations 4

6 How to pair a remote control with a RM Mini 3 from your smartphone? * Download e-control software from Google Play (Android) or App Store (ios) to your smartphone. * Turn on your Wi-Fi router. * Turn on the RM Mini 3. * Place the remote control next to the RM Mini 3. * You need to select an RM device before choosing remote type if you have more than one RM device. * At the top right corner tap the "+" icon and select Add remote. * Select a remote template. * Press a button from the remote control once and you will see the amber light flashing on the RM Mini 3 and your smartphone displayed the message as "Saved successfully". * Complete the programming of the buttons of the remote control. * Tap on the icon < back button from the top left corner of the e-control s application. * An icon will be created and displayed on the Control page. Now test the function of the icon that was created. Can I program a remote control using the Internet session while the Wi-Fi router is turned on? Yes you can. Ensure the RM Mini 3 is placed next to your remote device. Can I add a new device of BroadLink using the Internet session? No. To add a new device it requires the Wi-Fi router s authentications. That is to verify the Wi-Fi s login name and the password. FAQ How to pair the air conditions with the RM Mini 3? Follow the below instructions: * Plug in and turn on the RM Mini 3 where it closes to the air condition unit. * Place the air condition s remote control and your smartphone next to the RM Mini 3. * Start pairing the remote control. Can a RM Mini 3 covers all the remote controls of the house? It is depending on the location of the remote control s appliances were installed. RM Mini 3 works within the reception of the signal. If the remote control appliances is separated with a partition wall, then it is required another RM Mini 3 to control from there. Can RM Mini 3 works on tablets? Yes it can. Provided the tablet has the Internet and Wi-Fi capabilities. When I clicked on the and got the error message. Ignore the error message. The sa pdf file is a user guide. Do I need to install special software program to enable the connection of RM Mini 3? 5

7 No. The RM Mini 3 has a built in software application that will detect, communicate and connect to the Wi-Fi router. However, in order for the RM Mini 3 to work, the Wi-Fi router must turn on all the time. How to update the firmware of RM Mini 3? In the e-control application, tap on the + button on the top right corner, then tap on the Device list and select eremote from the list. Tap on the setting icon that is located at the top right corner and select Device info. Tap on the Firmware update. This will update the firmware to the latest version. How to reset the RM Mini 3? On the RM Mini 3, use a paper clip pin and press on the Reset s hole until the amber light is flashing and then release it. Then the RM Mini 3 is back to default factory status. What should I do if my smartphone is lost? To avoid unauthorized usage of your device(s) you should power off all the BroadLink devices and reset it. Does the product support 5G network configuration? BroadLink s products are currently supporting 2.4G Wi-Fi network only. e-control application Where can I download the e-control application? The e-control application is available from Google s Play Store for Android devices or App Store for ios devices. Is the e-control application free? Yes it is. What is the e-control application icon looks like? The e-control application icon looks like this. Can all BroadLink products controlled by the e-control application? Yes it can. Can I pair multiple remote controls with RM Mini 3 simultaneously? No. The RM Mini 3 can only pair one remote control at a time. How to protect my device and avoid being searched by others? BroadLink's devices are connected to your secured Wi-Fi router. Therefore your device will be seen and control by you. In addition, there is a lock features in the e-control application you can explore. How to lock my devices in e-control? 6

8 Go to the Device list and tap on the device icon that you wish to lock. Then tap on the setting icon on the top right corner and tap on the Lock device's button. Can I control BroadLink devices when I am away from home? Yes you can. All BroadLink devices are automatically linked to the Internet only when your Wi-Fi router is turned on and has Internet access. The BroadLink devices enables the owner to remote control the devices anywhere in the world from the smartphone via Internet. Will the device settings lost when my phone has no network connection or it is powered off? No. All action settings are saved in the device permanently unless you reset the device. The settings or configuration of the BroadLink devices in your phone will stay unless you have changed or deleted it. What to do when I make a mistake while pairing the remote control? You can redo it by deleting the icon first. First hold on the icon for more than 1 second and the option list will display. Tab on the Delete button and the icon will be deleted and you may start pairing again. Can I modify the name of my device? Yes you can. There are couple easy methods to modify the device name as follows: Method 1 * Tap on the icon you wish to change the name. Then tap on the setting icon on the top right corner and tap on the Device info. In the Name s field delete the existing one and key in the new name then tap on the Save button on the top right corner. Method 2 * Long press the device item on the device list and choose Edit name from popup menu. Then in the device operation page, tap the icon on top right corner and choose Edit device. Can I take a picture of the device and use it as an icon for the device? Yes. You can. Tap on the icon you wish to change the picture of the icon. Then tap on the setting button on the top right corner and tap on the Device info. In the Icon s field, tap on the > button and an option list will be displayed. Select Take a picture and once you happy about it tab on the Save button on the top right corner. (Please note: the picture will be stored in the smartphone). What to do when I cannot find a template for my device? A User-Defined template is readily available from the e-control under Add remote. Received Connection offline messages. What to do? Need to restart the smartphone. Receives Poor internet connections messages. What to do? Ensure the Internet signal coverage is strong and perform the required task again. If that doesn t work, restart the smartphone. 7

9 How to find out the firmware version of RM Mini 3? In the Control page, go to the top right corner and tap on the + icon, then a list of the device will be displayed. Tab on eremote and on the top right corner, tap on the setting on the top right corner, and tap on Device info. Select Firmware update and the firmware version shall display on your smartphone. This is also where you update the firmware. What is the function of Push Message in e-control? The function of Push Message in e-control is to grab the information from the server and send to a smartphone immediately. Eg, in S1, when a door is opened and instantly a message will send to smartphone and inform the owner of the situation. How to delete the device permanently from e-control? In the main control page, tap + on the top right corner and choose Device list to view all devices. For ios system, slide from right to left on a device item to delete it; For Android system, long press the device icon and choose Delete to delete the device. How to backup and restore settings? You can back up all device and application s settings to cloud and restore it when needed. To do so, it is required to login to your account before engaging the backup operations. To back up the settings, tap on the icon at the top left corner and then choose Backup in the menu. Tap Backup to cloud and choose OK to start backup. To restore the settings, tap on the icon in top left corner and then choose Backup in the menu. Tap Cloud backup list and choose a backup file from the list to start restoration. Note: After restoration, you need to connect your devices in the same Wi-Fi (WLAN) network before using the device. How to share settings with other phones? Settings can be shared to other phones but must be on the same Wi-Fi (WLAN) network and application version without using account. To share the setting follow the below instructions: * Tap the icon in top left corner and then choose Share in the menu. Tap Share to other phones in WLAN to prepare the sharing. * On another phone, tap Import from shared phone in WLAN in Share menu, the application will search available sharing data and import it. Note: Keep your phone active and unlock during sharing and importing. What is Cloud Share? You can use cloud share function to share your RM panel to the cloud. Other users can download the shared panel and do not need to learn each button. How to use Access Point (AP) configuration? * Make sure Wi-Fi (WLAN) is enabled on your smartphone and your device is in AP configuration mode. Slow blink for 4 times and stop for 1 second and repeats the cycle: 8

10 The device is in AP configuration mode. This mode is enabled after you long press the reset button when the device is already in configuration mode. * Open the app, tap the + icon on top right corner and then choose Add device. * In the configuration page, tap AP mode on top right corner and tap OK after you read the prompt. The app will lead you to the Wi-Fi selection page. * Connect to the network BroadlinkProv and tap to return. The app will show a Wi-Fi list. Please designate the same Wi-Fi network you used before AP configuration and input the password. * After configuration, the app will automatically connect to your previous Wi-Fi network and you will see the device in the list. Note: When using AP configuration, your smartphone should connect to the same Wi-Fi network that you want the devices to connect to. What should I do if the data is lost or devices cannot be controlled after the application is updated? Check if you have deleted the files under BroadLink directory (for Android phones it is stored in the root directory of SD card) including pictures or changed the SD card. If you have done the above operations by mistake, please uninstall the APP and reinstall the application. How to learn infrared code? In the device panel, tap an unlearned button, a prompt box including waiting for button learning will pop up and the orange LED of the device will be on. Point the remote to RM and press the matching button on remote. If the orange LED is off and it shows Save Successfully, it means the learning is successful. Then you can tap the learned button on APP, if the orange LED is on, which means the IR command is sent successfully. How to learn an aircon remote automatically by using the template of Pre-Defined Aircon? When you add a remote, select Air Conditioner. A prompt box will pop up and the orange LED will be on. Then press any button of ON/OFF / Mode / Temperature up and down etc and the orange indicator will be off. The device will search the IR code in the cloud code library and download the matching template. After the template is downloaded, you can test your smart phone by controlling the aircon. Why I can t use some of the buttons in Pre-Defined Aircon panel? Try to program and learn more buttons. Alternatively you might like to use User-Defined aircon template and learn each button. Customer can also submit an request to include the model of the remote control to innov.net_enquiries@yahoo.com. We will check with our engineer and about the request and reply to you. How to add a User-Defined Aircon? The IR code of aircon is more complex than TV. Each button of TV remote only represents a specific IR code. Each button of aircon may trigger a code combination, including temperature, mode, wind speed, etc. So we pre-define buttons for frequently used functions, such as cooling, heating and auto mode. Each of them are treated as ON button for a combination. For example, if you want to learn cooling at 22 C, you should pre-set the mode to cooling and temperature to 22 C on your remote and then press the ON/OFF button to turn off the aircon. Tap Cooling at XX C in the panel on APP to prepare 9

11 learning. Now, press ON/OFF button on the remote control to finish the learning and the learned status will be turn on cooling at 22 C. You can learn the OFF button in any status when you press the ON/OFF button to turn off the aircon (Although we use only one button for both ON and OFF functions on aircon remote but in the APP you need to learn them separately.) You can repeat the above learning steps to learn all the status with all temperature levels. How to learn a combination button? Choose an unlearned user-defined button and tap Learn combo to start the learning. Combination button learning can execute multiple commands. For example, if you want to switch to Channel 128 for TV, you need to learn button 1, 2 and 8 one by one. When you tap the button CH128, it will execute the command 1-2-8, just like you press the buttons 1, 2 and 8 on remote. You can also learn a combination button to turn on set-top box, TV and audio just by pressing one button. Why I cannot learn any button in mi TV and Apple TV panel? These two panels are pre-set with all IR codes for mi TV and Apple TV which can be used by users directly without learning. What is scene? It is a pre-program function to activate all selected devices with pre-set time lag. Customer can select devices and define the action of each device. How to set the timer tasks of the RM? Long press the learned button on the panel and tap Timer ON. After setting, tap Save on top right corner to save the timer. How many timer tasks can be added for RM Mini 3? 15. How to delete the timer task in e-control? On remote list page, tap on top right corner and select Timer. You can view and delete the timers here. How to update the e-control s app? Like any smartphone s apps, when there is a new update available, your smartphone will prompt you to update the app. This applies to Android and Apple devices. How to find out e-control s app version number? In the Control page as shown below, 10

12 click on the icon, select Settings -> About BroadLink -> then you should be able to see the version starting with v follows by the numeric figures. Technical specification Product RM Mini 3 Communication Mode Wireless Power Wi-Fi: b/g/n (2.4GHz) 0.85W Operating Related Humidity 85% Operating Temperature Power Supply 0~50 C AC100~240V,50/60Hz Power Input DC 5V 500mA (Micro USB ) Infrared frequency Infrared Direction Infrared Control Range: Device size (mm) 38K All Directions 12m 55 x 55 x 64.5mm Package size (mm) 136 x 136 x 72 Weight 75g Contact us: Innov.Net Pty Ltd innov.net_enquiries@yahoo.com; 11