M60. Getting connected with your device

Transcription

1 M60 Getting connected with your device

2 LEGAL INFORMATION Copyright 2016 TOZED CORPORATION. All rights reserved. We reserve the right to amend the technical parameters of the user manual. We will improve this user manual and adjust the printing errors in time without notification in advance.

3 Knowing the appearance and key functions of your device 1.Left Key 7.Call History 13.Delete 2.Direction Key 8.Configuration 14.Number Key 3.Select Key 9.Volume Up 15.Quick Key 4.Screen 10.Volume Down 16.Microphone 5.Right Key 11.Power On/Off 17.Handfree Key 6.Contact 12.Mute 18.Dial Key

4 Connecting your device To start using your device, connect your device as the following schematic diagram.

5 Note: ❶ means computer that should be connected with M60 by network cable. ❷ means DC adaptor. ❸ means wireless devices (e.g. phone, pad, laptop) Install SIM: push the SIM from SIM slot. After hearing a click sound, the SIM card is fixed right.

6 Configuring your PC The following steps shows how to configure the Internet protocol in Windows10 system for WIFI connection. 1. Go to Control Panel and find Network and Internet, and then go into Network and Sharing Centre. Select Change adapter settings.

7 2. Find Wireless Network Connection and right click it, and then click Properties. In WiFi Properties, double-click Internet Protocol Version 4(TCP/IPv4), or select Internet Protocol Version 4(TCP/IPv4) and then click Properties.

8 3. Select Obtain an IP address automatically, and Obtain DNS server address automatically. Click OK to confirm.

9 Wireless connection Method 1: Normal Connect Select the SSID on computer or mobile phone and click Connect. After inputting password, the WiFi can be used (default SSID and password can be seen on M60 sticker).

10 Method 2: WPS Connect PC: Select the SSID on computer and click Connect as above. Press WPS Connect in M60 WPS Setting menu, and then your computer will connect to the SSID automatically without inputting password. Mobile Phone: Press WPS Connect in M60 WPS Setting menu, and then operate phone WLAN Menu Advanced Settings WPS connection. The phone will connect with the SSID automatically without inputting password. Note: If need to use WPS Connect, please first switch on the WPS function as follows: WPS Setting WPS Switch Switch on Save. Then the WPS can be seen on idle screen. Switch off to disable WPS feature. Router Function menu on M60 device Top level Secondary Remark WiFi Status Show WiFi status Router WiFi Setting SSID, WPS Setting menu, etc. Function DHCP Settings local IP, DHCP switch, Advanced Setting

11 Standby status Network signal strength Battery label WIFI signal Current network type 4G Calling forward open Connect power supply Missing calls In charging VoLTE active (if no, VoIP active)

12 Web configuration The device supports standard internet cable or WLAN wireless way to connect with computer or wireless devices. No matter what way to connect, please make sure to set the mode: obtain IP address as automatically. Please enter in the IE browser after the computer obtain the IP address. Then inputting username and password to access WEB UI. Router s default username is "user", and password can be seen on device sticker. For logging into the WEB UI, proposed browsers are as follows: at least IE 7.0 at least Firefox 3.0 at least Safari 4.0 at least Opera 10.0 at least Chrome 10.0

13 Main features 1. Main features on phone menu 1) Voice Call Calls Method#1. Pick up the handset or press the Handfree Key, then dial the number and wait for a few seconds or Dial press the key. Method#2. Dial the number then press the key. Method#3.pick up the handset and dial the number, and then press the key. Answer Call options When receive a call, the phone will ring, pick up the handset or press the Handfree Key to answer the call. When you are in a call, press the Volume Up or Volume

14 Down Key to change the volume. Press the Mute Key so that other side cannot hear your voice, press Mute Key again to cancel mute. Call setting In idle screen, press Configuration Key Select Call Setting. 2) Call History Press Call History Key to enter the Call History Menu as follows. Top level menu Secondary menu Remark Call History Call sent Call missed Call received Erase calls Sent call list Missed call list Received call list Delete call history

15 3) Contact Press Contact Key to enter the Contact menu as follows. Top level menu Secondary menu Remark Browse Browse contacts Add Create contacts Contact Search Search contacts Delete All Delete all contacts Memory Space Contacts details

16 4) Configuration Press Configuration Key to enter the Contact menu as follows. Top level menu Secondary menu Remark LCD setting Sound setting Setting backlight Set volume, ring type, ring volume etc. Configuration Time setting Network setting Call setting Security Set update time and time format Select Network and set APN Sip config, Auth config, call wait etc. PIN setting and factory reset

17 5) Router functions Top level menu Secondary menu Remark Router functions WiFi status WiFi setting DHCP setting WiFi Status Set SSID, password, WPS setting etc. Setting local IP, DHCP switch, senior setting 6) System Info Top level menu Secondary menu Software Version System Info Voice status Hardware Info

18 Model Version Battery MAC Address Running time Mobile Counter 7) Quick Dial M60 provides 8 quick keys to make quick dial. Before using this function, please setting quick key number as follows. * If you have not set quick key number before, you can press the Quick Key input the number press Left Key to save. * If you want edit the quick key number that you have already set before, please press Configuration Key Select Call Setting Select Quick Dial Select

19 the quick key that you want to edit. You can press Delete Key to delete the number and set a new number. 2. Main features on WEB UI 1) Port Forwarding Log into the WEB UI. Select Port Forwarding in Firewall Settings menu, and then set port forwarding.

20 2) DDNS Settings Log into the WEB UI. Select DDNS Settings in Route Function menu, and then set DDNS parameters.

21 Warning and notice Do not insert SIM card when the device is powered up. Please power off the phone if long time non use the phone. Use original power adapter and battery, or accessories that authorized by Tozed, otherwise it may damage the device or cause dangerous. Do not put the phone in the sunlight or high temperature place, it may cause explosion due to high temperature of battery. Some electronic devices will disturb electromagnetic field. Keep your device away from TV, radio or other electronic devices to have best performance. Do not attempt to dismantle your device. It will make you void your warranty. The device is for indoor only. Do not use it outside.

22

23

24 Customer Service Hotline: General Office Dialog Broadband Networks (Pvt) Ltd. (PV 261) No. 475, Union Place, Colombo 02 Sri Lanka Tel / FAX

25

26