Cisco ATA SPA112 & SPA122.
|
|
- Tyrone Walsh
- 6 years ago
- Views:
Transcription
1 STEP 1 Connect your device's power and ethernet cables. For users with the SPA112: Connect your router with the supplied Ethernet network cable to the SPA112's internet port. Now connect your phone to the SPA112's Phone 1 port. Finally plug the supplied power cable into the SPA112. For users with the SPA122: Connect your router with the supplied Ethernet network cable to the SPA122's Internet port. Temporarily connect your computer to the SPA122's Ethernet port using a Ethernet network cable (this is necessary as the SPA122 will not allow you to access the web configuration interface without changing the default web password). Now connect your phone to the SPA122's Phone 1 port. Finally plug the supplied power cable into the SPA122. STEP 2 Wait 60 seconds after plugging your SPA112/SPA122 in. Pick up the phone connected to the SPA112/SPA122 and dial the * key on your phone 4 times. For users with the SPA112: Have a pen and paper ready. You will hear a message Enter a menu option, then enter on your phone. You will now hear a message giving you the IP address of your SPA112 such as " " and write this number down. For users with the SPA122: Have a pen and paper ready. You will hear a message Enter a menu option, then enter on your phone. You will now hear a message giving you the IP address of your SPA122 such as " " and write this number down. STEP 3 Open a web browser on your computer such as Firefox or Chrome and enter the IP address you heard in step 4 as the address (I.E. where you would normally enter Please note: some browsers will require you to remove leading zero's ( 0 's ) in the IP address. For example if you heard " " you should change this to " ".
2 You should now see a page that looks like this: Enter the default credentials in the appropriate fields. For the SPA112/SPA122 please specify "admin" as the username, and "admin" as the password (without quotes). STEP 4 After entering the password you should see a screen that looks similar to the one below: Click on Network Setup in the top menu bar, and click on the Internet s link on the left side navigation bar and configure your settings accordingly (as shown below):
3 Please use the following settings: DNS Server Order: Manual DHCP Primary DNS: or yours [1] Secondary DNS: or yours [2] Once you have made your changes click on the Submit button to save your changes. STEP 5 Next, click on the Time settings link on the side navigation bar and configure your settings accordingly (as shown below):
4 Time Zone: Time Server Address: Select your specific time zone Manual, time.nist.gov Click the Submit button to save your changes. STEP 6 Now, click on Voice on the top menu bar, and click on the SIP link on the side navigation bar and configure your settings accordingly (as shown below): RTP Packet Size: G729a Codec Name: G729b Codec Name: G729 G729 Click the Submit button to save your changes.
5 STEP 7 We will now configure your EncryptoTel credentials. To do this click on the Line 1 link on the side navigation bar and configure your settings accordingly (as shown below): NAT Mapping Enable: NAT Keep Alive Enable: Proxy: Outbound Proxy: s1.encryptotel.com s1.encryptotel.com SIP TCP Port Min: 5320 Register Expires: 60 Use DNS SRV: DNS SRV Auto Prefix: User ID: Password: Auth ID: Your number with extension. Enter your extension SIP Password here. You may edit the SIP password you wish to use in by logging into your EncryptoTel account and clicking on the Extension menu link and then modifying the appropriate extension. Your number with extension.
6 You cannot register to your account using only the extension number. Use Auth ID: Preferred Codec: Second Preferred Codec: Dial Plan: G729a G711u (*xxx *75xx [49] xxx[2 9]xxxxxxS0 xxxxxxxxxxxx. **275*x.) After you have configured your line settings click the Submit button to save your changes. STEP 8 That's it! You can now make a phone call.
Cisco SPA112 Configuration Guide Using AccessLine SIP Trunks
Cisco SPA112 Configuration Guide Using AccessLine SIP Trunks Version 1.0 1 April 2013 Configuration Guide for the Cisco SPA112 with AccessLine Before you begin you will need to have active SIP Trunks from
More informationCisco IP Phone Configuration Guide
Version 1.0 Date: 2016.09.21 Yeastar Information Technology Co. Ltd. Introduction This guide introduces how to configure Cisco IP phones with Yeastar S-Series VoIP PBX. You have multiple ways to configure
More informationHow to Configure the Cisco SPA303 and SPA504G as an AnyPhone Device: *** Note: The SPA303 does NOT support PoE, and the SPA504G DOES support PoE.
Note: A single Anyphone line has a maximum concurrent call capacity of 4 calls. Hardware capacity should also be taken into consideration. This means that Cisco SPA303 can handle up to 3 concurrent calls,
More informationSipura SPA 3000 How To. (c) Bicom Systems
Sipura SPA 3000 How To Sipura SPA 3000 How To All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording,
More informationCisco's SPA1XX series are the next generation successors to the popular but now discontinued, Linksys (Cisco) PAP2 and PAP2T VoIP ATAs.
Cisco SPA112 and SPA 122 Basic Configuration Guide by Wahroonga Farm The Cisco SPA112 and SPA122 Cisco's SPA1XX series are the next generation successors to the popular but now discontinued, Linksys (Cisco)
More informationNF3ADV VoIP Setup Guide (for Dodo)
NF3ADV VoIP Setup Guide (for Dodo) Configuring your NF3ADV for Dodo VoIP The following steps will take you through the process of setting up your VoIP connection. This guide assumes that the NF3ADV already
More informationinternet phone service
New Features/Promos (8) Welcome. My account Sign Up 0 internet phone service PRODUCTS HOW IT WORKS FEATURES RATES SUPPORT CONTACT US MAKE CALLS RECEIVE CALLS ALL SERVICES Search Home > Support > Grandstream
More informationidor Mobile Setup idor Mobile : idor Mobile System Manual V1.1 1
idor Mobile Setup Table of Contents Login into the Web-GUI... 3 Network Settings... 4 Set Static IP Address... 5 Apartments... 7 Add an Apartment... 7 Edit an Apartment... 9 Delete an Apartment... 9 SIP
More informationSipura SPA 2002 How To. (c) Bicom Systems
Sipura SPA 2002 How To Sipura SPA 2002 How To All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording,
More informationIS-381 / IS-382 IP Audio gateway. User Manual
IS-381 / IS-382 IP Audio gateway User Manual IS-381 IS-382 PORTech Communications Inc. Content 1. Introduction... 1 2. Functions... 1 3. Parts list... 2 4.Main body size... 2 5.Panel description... 3 6.Link
More informationTECHNICAL NOTE HOW TO CONFIGURE ALLOYVOICE SIP TRUNKS ON GRANDSTREAM UCM 6XXX SERIES. 1. Introduction. Author: Adam Wells Date: June 6th, 2018
HOW TO CONFIGURE ALLOYVOICE SIP TRUNKS ON GRANDSTREAM UCM 6XXX SERIES 1. Introduction This Technical note will go through information on how to setup AlloyVoice on Grandstream UCM PBX, as well as general
More informationPLEASE READ. This user manual is from the manufacturer Jive Communications may not support some features discussed in this document.
PLEASE READ This user manual is from the manufacturer Jive Communications may not support some features discussed in this document. Please see our online documentation or contact us for a complete list
More informationDEVICE CONFIGURATION GUIDE
DEVICE CONFIGURATION GUIDE Using the CallSpeak Service with the Linksys PAP2 Phone Adapter DocVersion: CallSpeak-PAP2-DCG-080205 All Rights Reserved Copyright 2005 The use, disclosure, modification, transfer,
More informationCisco Unified Communications UC320W Pre-Installation Site Information
Cisco Unified Communications UC320W Pre-Installation Site Information Use this workbook to gather information from your customer before you install the Cisco Unified Communications UC320W at the site.
More informationSIP Trunking using Optimum Business SIP Trunk Adaptor and the Nortel BCM50 IP-PBX (Release 5.0)- V
NORTEL SIP Trunking using Optimum Business SIP Trunk Adaptor and the Nortel BCM50 IP-PBX (Release 5.0)- V9.0.1.74.660 Goal The purpose of this configuration guide is to describe the steps needed to configure
More informationDolby Conference Phone. Configuration guide for Avaya Aura Platform 6.x
Dolby Conference Phone Configuration guide for Avaya Aura Platform 6.x Version 3.1 22 February 2017 Copyright 2017 Dolby Laboratories. All rights reserved. Dolby Laboratories, Inc. 1275 Market Street San
More informationSipura SPA-1001 Simplified Users Guide Version 1.1a
Sipura SPA-1001 Simplified Users Guide Version 1.1a A Step by Step Introduction Written by Jason from JMG Technology http://www.jmgtechnology.com.au Section 1 Getting Started When you receive your SPA-1001
More informationEIP 7012 Essence VoIP Phone Administration Guide Version 1.0B
Essence Technology EIP 7012 Essence VoIP Phone Administration Guide Version 1.0B Table of Contents 1 Introduction... 1 1.1 Hardware Overview... 1 1.2 Software Overview... 1 2 Keypad interface for IP Phone
More informationPágina 1 de 2 Router Voice Info System SIP Provisioning Regional Line 1 PSTN Line User 1 PSTN User SIP Parameters Max Forward: 70 Max Redirection: 5 Max Auth: 2 SIP User Agent Name: $VERSION SIP Server
More informationANSEL FXS / 1 PSTN. VoIP Telephone Adaptor. User Manual V1.10
ANSEL 5518 1 FXS / 1 PSTN VoIP Telephone Adaptor User Manual V1.10 Quick Guide Step 1: Broadband (ADSL/Cable Modem) Connections for ANSEL 5518 A. Connect ANSEL 5518 WAN port to ADSL NAT Router as the following
More informationNB16WV-02 VOIP Setup Guide (for Generic)
NB16WV-02 VOIP Setup Guide (for Generic) Configuring your NB16WV-02 for VOIP Service The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer
More informationQuick Installation Guide
Quick Installation Guide IP/PRI/FXS/BRI PBX Version 2.1 Quick Installation Guide v2.1 www.cem-solutions.net 2 Table of Contents Initial Setup of IP/PRI/FXS/BRI PBX... 4 Notification LEDs (On the Front
More informationWhere Did It Come From?
Where Did It Come From? If your SPA2100 came pre-programmed from a VOIP provider, you may need to take extra care and may run into certain limitations. We have even heard that sometimes line 1 is not usable...
More informationPeering Grandstream Camera & IP Multimedia Phone on door open. Configuration Guide
Peering Grandstream Camera & IP Multimedia Phone on door open Configuration Guide TABLE OF CONTENTS PEERING GRANDSTREAM CAMERA & IP MULTIMEDIA PHONE ON DOOR OPEN CONFIGURATION GUIDE Contents...1 INTRODUCTION...3
More informationDolby Conference Phone. Configuration guide for Avaya Aura Platform 6.x
Dolby Conference Phone Configuration guide for Avaya Aura Platform 6.x Version 3.2 28 June 2017 Copyright 2017 Dolby Laboratories. All rights reserved. Dolby Laboratories, Inc. 1275 Market Street San Francisco,
More informationDolby Conference Phone 3.0 configuration guide for Unify OpenScape Enterprise Express 8.0.x
Dolby Conference Phone 3.0 configuration guide for Unify OpenScape Enterprise Express 8.0.x 11 July 2016 Copyright 2016 Dolby Laboratories. All rights reserved. For information, contact: Dolby Laboratories,
More informationGrandstream IP Phone Configuration Guides
Grandstream IP Phone Configuration Guides Version 1.0 Yeastar Information Technology Co. Ltd. Table of Contents FOR GRANDSTREAM GXP SERIES... 3 Register with MyPBX... 3 Provisioning for MyPBX... 5 Phone
More informationConfiguring the Grandstream UCM6202 for use with TopView Voice Notification Updated August 2018
Configuring the Grandstream UCM6202 for use with TopView Voice Notification Updated August 2018 Contents Introduction... 2 Voice Notification in TopView... 2 Options for using VOIP in TopView... 2 How
More informationDHCP Option 66 Auto Provisioning Guide
Overview UniFi VoIP Phones can be configured using a Configuration File through TFTP or HTTP/HTTPS download. When a UniFi VoIP Phone boots up or reboots, it attempts to get the provisioning server URL
More informationThermal Printer Configuration (EPSON)
Thermal Printer Configuration (EPSON) STEP A : IDENTIFY THE THERMAL PRINTER MODEL Check for your EPSON printer model by finding the label on the printer. Figure 1.1 For the example above (Figure 1.1),
More informationConfiguration manual. Grandstream Type: Analog Telephone Adapter. Configuration manual Grandstream Version 1.2
Configuration manual Grandstream Type: Analog Telephone Adapter Configuration manual Grandstream Version 1.2 Contents 1 Introduction 1 2 Key terms and abbreviations 1 3 Logging on to the web interface
More informationTT11 VoIP Router 1FXS/1FXO TA User Guide
TT11 VoIP Router 1FXS/1FXO TA User Guide Page 1 Table of Contents: 1.0 Introduction... 3 2.0 Package Contents... 3 3.0 Summary of LED & Connector Descriptions... 4 3.1 The Front LEDs... 4 3.2 The Rear
More informationBasic FXS Gateway Configuration
Mediatrix units with FXS ports Revision 308 2015-06-25 Table of Contents Table of Contents Configuring the Mediatrix Unit 3 Getting Started 3 Logging On to the Mediatrix Unit Web Interface 3 Configuring
More informationDolby Conference Phone. Configuration guide for Unify OpenScape Enterprise Express 8.0.x
Dolby Conference Phone Configuration guide for Unify OpenScape Enterprise Express 8.0.x Version 3.2 28 June 2017 Copyright 2017 Dolby Laboratories. All rights reserved. Dolby Laboratories, Inc. 1275 Market
More informationPlease note, instructions in this guide are based on a PC running Windows 7. Please adapt the actions to suit your operating system.
Please note, instructions in this guide are based on a PC running Windows 7. Please adapt the actions to suit your operating system. Please follow these steps to ensure that any changes made by your previous
More informationAll Rights Reserved. Copyright 2005
Page i All Rights Reserved Copyright 2005 The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright
More informationKeep Referee When REFER Failed: Reg Retry Long Random Delay: 0. RTP Tx Packet Size Follows Remote SDP:
SIP SIP Parameters Max Forward: 70 Max Redirection: 5 Max Auth: 2 SIP Server SIP Reg Starting Sequence Number: DTMF Relay MIME Type: Remove Last Reg: $VERSION application/dtmf-relay SIP User Agent SIP
More informationInstallation with a DSL Connection.
www.voicelift.com Support@VoiceLift.com Office: 1.866.237.3001 Fax: 321.632.7632 Installation with a DSL Connection. DSL connections can be more challenging since most DSL modems are also routers and supply
More informationDMP 128 Plus C V DMP 128 Plus C V AT. RingCentral Configuration Guide REVISION: 1.0 DATE: JUNE 26 TH 2018
DMP 128 Plus C V DMP 128 Plus C V AT RingCentral Configuration Guide REVISION: 1.0 DATE: JUNE 26 TH 2018 Revision Log Date Version Notes June 26 th 2018 1.0 First Release: Applies to Firmware 1.01.0010
More informationLinksys configuration for working with Novataxe. Ver 4.3.1
Linksys configuration for working with Novataxe. Ver 4.3.1 Table of Contents Connection...2 Connect Network Cable...2 Detecting the Linksys GW IP address...2 Default...2 Using Telephone connected...2 Setting
More informationContents. 2 V85 Desktop VoIP Phone User Guide YML772 Rev1
Contents Chaper 1: Introduction... 4 About VoIP... 4 Chapter 2: Getting to know your V85... 6 Before you begin...... 6 Package Contents... 7 Rear of the V85... 8 Chapter 3: Getting your V85 Up and Running...
More informationnexvortex Setup Guide
nexvortex Setup Guide AT&T SYNAPSE May 2012 Introduction This document is intended only for nexvortex customers and resellers as an aid to setting up the Synapse Small & Medium Business Phone System from
More informationDolby Conference Phone. Configuration Guide for Microsoft Skype for Business
Dolby Conference Phone Configuration Guide for Microsoft Skype for Business Version 3.3 31 July 2017 Copyright 2017 Dolby Laboratories. All rights reserved. Dolby Laboratories, Inc. 1275 Market Street
More informationEP502/EP504 IP PBX 1.1 Overview
1.1 Overview The EP502/EP504 is an embedded Voice over IP (VoIP) Server with Session Initiation Protocol (SIP) to provide IP extension phone connection for global virtual office of small-to-medium business
More informationPlease follow the steps that are listed here to get started with your Berkshire 10K ippbx telephone system.
Please follow the steps that are listed here to get started with your Berkshire 10K ippbx telephone system. Step 1 Power-up and log into your PC. Unplug any existing ethernet cable from your PC. Step 2
More informationSpectrum Enterprise SIP Trunking Service Cisco SPA 9000 Firmware IP PBX Configuration Guide
Spectrum Enterprise SIP Trunking Service Cisco SPA 9000 Firmware 6.1.5 IP PBX Configuration Guide About Spectrum Enterprise: Spectrum Enterprise is a division of Charter Communications following a merger
More informationCisco SPA 504G Setup and User Guide
Cisco SPA 504G Setup and User Guide Version 1.0 Created: April 2012 Last Updated: Copyright Copyright 2005, 2006, 2007, 2011, 2012 MyPhones Ltd. Information in this document is subject to change without
More informationDolby Conference Phone. Configuration Guide for Unify OpenScape Enterprise Express 8.0.x
Dolby Conference Phone Configuration Guide for Unify OpenScape Enterprise Express 8.0.x Version 3.3 31 July 2017 Copyright 2017 Dolby Laboratories. All rights reserved. Dolby Laboratories, Inc. 1275 Market
More informationCyberData SIP Page Server V3 Integration with 8x8 Serial Numbers 1461x
CyberData SIP Page Server V3 Integration with 8x8 Serial Numbers 1461x This document covers the integration of CyberData s SIP Page Server V3 with 8x8. This document was written for 8x8 and the following
More informationUser Guide. V110, V210P, V211, V220 VoIP ATA
User Guide V110, V210P, V211, V220 VoIP ATA Welcome to the Wonderful World of VoIP Congratulations on your purchase of a NetComm VoIP ATA. Whether this is your first VoIP device or you are upgrading from
More informationDolby Conference Phone. Configuration guide for Cisco Unified Communications Manager
Dolby Conference Phone Configuration guide for Cisco Unified Communications Manager Version 3.1 22 February 2017 Copyright 2017 Dolby Laboratories. All rights reserved. Dolby Laboratories, Inc. 1275 Market
More informationGRANDSTREAM BUDGE TONE-100 IP PHONE INSTALLATION GUIDE
pag.1 GRANDSTREAM BUDGE TONE-100 IP PHONE INSTALLATION GUIDE pag.2 SUMMARY SERVIZIO VOIP SKYPHO...3 BUDGE TONE-100 PACKAGE CONTENT...3 DEVICE PHISICAL CONNECTION...4 ACCESS TO THE DEVICE...5 Access to
More informationVolume SKYSWITCH. Configuring an Edgemarc Nov Configuring An Edgemarc
Volume 1 SKYSWITCH Configuring an Edgemarc Nov 2017 Configuring An Edgemarc SKYSWITCH Creating An Edgemarc SkySwitch 608 Robin Road Lakeland FL 33803 Phone 747-900-5401 Fax 863-647-5192 Table of Contents
More informationApplication Notes for Configuring Yealink T-18 SIP Phones to interoperate with Avaya IP Office - Issue 1.0
Avaya Solution & Interoperability Test Lab Application Notes for Configuring Yealink T-18 SIP Phones to interoperate with Avaya IP Office - Issue 1.0 Abstract These Application Notes describe the configuration
More informationDMP 128 Plus C V DMP 128 Plus C V AT. Avaya Aura Configuration Guide REVISION: 1.1 DATE: SEPTEMBER 1 ST 2017
DMP 128 Plus C V DMP 128 Plus C V AT Avaya Aura Configuration Guide REVISION: 1.1 DATE: SEPTEMBER 1 ST 2017 Revision Log Date Version Notes August 6 th 2017 1.0 First Release. Applies to Firmware 1.01.0004.002
More informationSPA400 Internet Telephony Gateway with 4 FXO Ports
SPA400 Internet Telephony Gateway with 4 FXO Ports Administration and Configuration Guide v1.0 Using the SPA400 The SPA400 features the ability to connect up to four (4) standard analog telephones lines
More informationConfiguring the Dolby Conference Phone with Avaya Aura Platform 6.*
Configuring the Dolby Conference Phone with Avaya Aura Platform 6.* Version 1.3 December 16, 2015 This product is protected by one or more patents in the United States and elsewhere. For more information,
More informationPancode IP User Manual from Version 49 and above
Pancode IP User Manual from Version 49 and above Contents Contents... 1 Chapter 1. Product Overview... 3 1. Introduction... 3 2. Features... 3 Chapter 2. Quick Setup... 5 Chapter 3. Settings... 9 1. IP
More informationDMP 128 Plus C V DMP 128 Plus C V AT. Cisco CUCM Configuration Guide REVISION: 1.1 DATE: SEPTEMBER 1 ST 2017
DMP 128 Plus C V DMP 128 Plus C V AT Cisco CUCM Configuration Guide REVISION: 1.1 DATE: SEPTEMBER 1 ST 2017 Revision Log Date Version Notes August 4 th 2017 1.0 First Release: Applies to Firmware Version
More informationSipura Technology, Inc.
Sipura Technology, Inc. SPA-2000 User Guide December 2003 Sipura SPA-2000 User Guide v1.0.3.doc 2003 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2) 1 Disclaimer Please Read: This document
More informationPolycom IP Phone Configuration Guides. Yeastar Technology Co., Ltd.
Polycom IP Phone Configuration Guides Yeastar Technology Co., Ltd. Table of Contents 1 For wireless server 300... 3 1.1 Register with MyPBX... 3 2 For soundpoint & SoundStationn... 8 2.1 Register with
More informationTalkswitch. Optimum Business Trunking and the Talkswitch Configuration Guide
Optimum Business Trunking and the Talkswitch Configuration Guide Table of Contents 1. Overview 2. SIP Trunk Adaptor Set-up Instructions 3. Additional Set-up Information 4. International Calling 5. PBX
More informationVS Port FXS SIP. VoIP Telephone Adaptor. User Manual. V2.1h
VS200 2-Port FXS SIP VoIP Telephone Adaptor User Manual V2.1h Quick Guide Step 1: Broadband (ADSL/Cable Modem) Connections for VS200 A. Connect VS200 LAN port to ADSL NAT Router as the following connection.
More informationRemote User - Mediatrix SBC on the Edge
Mediatrix Sentinel and Mediatrix 3000 v. 2.0.40.747 2018-03-29 Table of Contents Table of Contents to Know Before Starting 4 Remote Users - Mediatrix SBC Located on the Edge 5 Getting Started 5 Logging
More informationRadiolabs Bridge in a Box Setup
Radiolabs Bridge in a Box Setup This manual will guide you through creating a point-to-point bridge using your Radiolabs equipment. Step 1: Preparing for setup. To set the bridge up, start by unboxing
More informationConfiguration guide for Switchvox and Bandwidth.com
Configuration guide for Switchvox and Bandwidth.com This document will guide a Switchvox administrator through configuring the system to utilize bandwidth.com s SIP Trunking Service. After you have the
More informationStandard SIP Terminal IP Phone ITX-1615 Phone Manager User Guide
Standard SIP Terminal IP Phone ITX-1615 Phone Manager User Guide Before using this product and document, please read the following document carefully. Also, please keep this document to the place where
More informationConfiguring Guide & Specifications SFT
Configuring Guide & Specifications WWW.AEICommunications.com Table of Contents AEI... 3 Overview... 3 Requirements... 4 Installation... 5 Activation... 6 Configuring Account Settings... 6 Registering the...
More informationRemote User - Mediatrix SBC on the Edge
Mediatrix Sentinel and Mediatrix 3000 v. 43.3.1398 2018-12-13 Table of Contents Table of Contents Information to Know Before Starting 4 Remote Users - Mediatrix SBC Located on the Edge 5 Getting Started
More informationXBox Setup There are two ways of allowing your XBox to communicate with the internet. One is through port forwarding and the other is through the DMZ feature. Port forwarding will enable specified ports
More informationRING CENTRAL CONFIGURATION GUIDE: V3.1 PAGING SERVER
RING CENTRAL CONFIGURATION GUIDE: V3.1 PAGING SERVER Document Part #931042E 3 Justin Court Monterey, CA 93940 (831) 373-2601 Doc. 931042E Page 1 RingCentral Configuration Guide: V3.1 Paging Server Document
More informationexamcollection.premium.exam.161q
300-075.examcollection.premium.exam.161q Number: 300-075 Passing Score: 800 Time Limit: 120 min File Version: 6.0 300-075 Implementing Cisco IP Telephony & Video, Part 2 v1.0 Version 6.0 Exam A QUESTION
More informationYealink IP Phone Configuration Guides. Yeastar Technology Co., Ltd.
Yealink IP Phone Configuration Guides Yeastar Technology Co., Ltd. Table of Contents Register with MyPBX manually... 3 Configuring BLF on Yealink... 6 Provisioning for MyPBX... 8 3.1 Phone provisioning
More informationN B9 WM AXX N V OIP Setu p Gu ide (for Internode)
N B9 WM AXX N V OIP Setu p Gu ide (for Internode) C on figur in g y ou r N B9W MA XXN for In te rn o d e VOIP The following steps will take you through the process of setting up your VOIP connection. Step
More informationXBox Setup.
XBox Setup (NB604) XBox Setup There are two ways of allowing your XBox to communicate with the internet. One is through port forwarding and the other is through the DMZ feature. Port forwarding will enable
More informationTHINKTEL COMMUNICATIONS FONALITY TRIXBOX-PRO
THINKTEL COMMUNICATIONS FONALITY TRIXBOX-PRO SIP-TRUNK Configuration TABLE OF CONTENTS 1.1 CONFIGURING TRIXBOX-PRO WITH THE ITSP (THINKTEL)... 3 1.2 LOGGING IN TO THE TRIXBOX-PRO... 4 1.3 CONFIGURATION
More informationAnalog Telephone Adapter Setup for Q-SYS Softphone
Analog Telephone Adapter Setup for Q-SYS Softphone This document applies to this Cisco device: SPA232D Introduction This document covers the use of the SPA232D in the role of analog telephone adapter (ATA)
More informationThe VH2 can handle one or two VoIP accounts (a single account can be assigned to both channels).
VH2 Quickstart Guide The VH2 is a studio telephone interface device designed to work on VoIP telephone systems. This guide will give you the minimum you need to know to get the system hooked up and running.
More informationA. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
Volume: 383 Questions Question No: 1 Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically? A. On the VCS, navigate to
More informationA Division of Cisco Systems, Inc. Wireless-G. IP Phone. User Guide. Voice WIP330. Model No.
A Division of Cisco Systems, Inc. Voice Wireless-G IP Phone User Guide Model No. WIP330 Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark
More informationQuick Start Guide. Intermedia Unite Cisco SPA112
Quick Start Guide Intermedia Unite Cisco SPA112 2 Welcome to Intermedia Unite. What s in the box? Cisco SPA112 A. SPA112 ATA B. Ethernet cable C. Power adapter D. Plug end A. C. B. D. 3 Guided Setup Your
More informationStep 1: Checking Computer Network Settings:
Configuring your 3G18WV for VOIP The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer Network Settings: You will need to connect your computer
More informationPort Forwarding Setup (RTA1025W)
Port Forwarding Setup (RTA1025W) Port Forwarding Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly connected. This is most commonly
More informationApplication Notes for configuring IPC Unigy with Avaya Communication Server and Avaya Aura Session Manager 6.1 using SIP Trunks Issue 1.
Avaya Solution & Interoperability Test Lab Application Notes for configuring IPC Unigy with Avaya Communication Server 1000 7.5 and Avaya Aura Session Manager 6.1 using SIP Trunks Issue 1.0 Abstract These
More informationQuick Installation Guide
Quick Installation Guide BRI Gateway Version 2.1 Table of Contents Hardware Setup... 1 Accessing the WEB GUI... 2 Creating SIP Trunks... 3 Creating BRI Trunks... 4 Call Routing Rules... 4 Hardware Setup
More informationBusiness Communication Manager Release 5.0 Configuration Guide for Skype for SIP R1.3. Issue 1.0
Avaya BCM Solutions Test Lab Business Communication Manager Release 5.0 Configuration Guide for Skype for SIP R1.3 Issue 1.0 Abstract This document provides guidelines for configuring a SIP Trunk between
More informationPort Forwarding Setup (RTA1025W Rev2)
Port Forwarding Setup (RTA1025W Rev2) Port Forwarding Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly connected. This is most commonly
More informationPhone Adapter with Router
Voice User Guide Model No. SPA2102 Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates
More informationVoIP ATA series (ATA171plus, ATA172plus, ATA-171, ATA-172, ATA-171M, ATA-171P)
ATA Web User Guide VoIP ATA series (ATA171plus, ATA172plus, ATA-171, ATA-172, ATA-171M, ATA-171P) User Guide Released Date : January-2015 Firmware Version : V.303 1. Introduction... 4 2. Hardware Overview...
More informationKTA1010 INSTALL GUIDE
KTA1010 INSTALL GUIDE Table of Contents 1 Check for Required Items... 2 2 Installation... 2 2.1 Installation View... 2 2.2 Connection Chart to determine cable types... 3 3 Ready to use... 3 3.1 Network
More informationATA-171/172/ 171P/171M/ 171+/172+ User s Guide
ATA-171/172/ 171P/171M/ 171+/172+ V2.1 2011/02/25 Table of Contents 1 Introduction...4 Chapter 1.1 Hardware Overview...4 Chapter 2.1 Software Overview...4 Keypad Interface for The ATA...5 Chapter 3.1 Instruction
More informationPort Forwarding Setup (NB7)
Port Forwarding Setup (NB7) Port Forwarding Port forwarding enables programs or devices running on your LAN to communicate with the internet as if they were directly connected. This is most commonly used
More informationHD Voice Conference IP Phone with PSTN (3-Line) VIP-8030NT
HD Voice Conference IP Phone with PSTN (3-Line) Copyright Copyright (C) 2014 PLANET Technology Corp. All rights reserved. The products and programs described in this User s Manual are licensed products
More informationSVG300S+ 2 FXS SIP/IAX ATA USER MANUAL
SVG300S+ 2 FXS SIP/IAX ATA USER MANUAL STEPHEN TECHNOLOGIES CO.,LIMITED ALL RIGHTS RESERVED Contents Preface... 3 About this Manual... 3 Audience... 3 Related Documentation... 3 Document Conventions...
More informationAT&T VOIP Nortel BCM50 Release 3.0 SIP Configuration Guide For Use with AT&T IP Flexible Reach Service. Issue /26/2007
AT&T VOIP Nortel BCM50 Release 3.0 SIP Configuration Guide For Use with AT&T IP Flexible Reach Service Issue 0.7 12/26/2007 Issue 0.7 Page 1 of 37 TABLE OF CONTENTS 1 Introduction... 4 1.1 Pre-IP PBX Configuration
More informationUser Manual. Model: 4GoIP. Version 1.0
User Manual Four Channel s GSM VoIP Gateway Model: 4GoIP Version 1.0 Contents 1 Product Introduction... 3 1.1 General Information...3 1.2 Protocol...3 1.3 Hardware Specification...4 1.4 Software Specification...4
More informationBasic SIP Endpoint Registration
For all Mediatrix units with telephony cards v. 43.1.1264 2018-09-26 Table of Contents Table of Contents to Know Before Starting 3 4 Logging on to the Mediatrix Unit Web Interface 4 Configuring the Default
More informationConfiguring SIP Registration Proxy on Cisco UBE
The Support for SIP Registration Proxy on Cisco UBE feature provides support for sending outbound registrations from Cisco Unified Border Element (UBE) based on incoming registrations. This feature enables
More informationTime Warner Cable Configuration Guide
Time Warner Cable Configuration Guide Patton SmartNode 1k April 2015 Document Version 1.0 1. Overview: This guide describes the configuration procedures required for the Patton SmartNode 1k for interoperability
More information2757 VoIP Phone Users Guide
2757 VoIP Phone Users Guide Rev. 1.0 Table of Contents 1 Introduction... 5 1.1 Package Contents... 5 1.2 Features... 5 1.3 Basic Setup... 6 2 Network Setup... 8 2.1 Static IP Address... 8 2-2 PPPoE...11
More information