ExtremeXOS Hardware and Software Compatibility Matrix

Transcription

1 ExtremeXOS Hardware and Software Compatibility Matrix This document provides information about the minimum version of ExtremeXOS software required to support BlackDiamond and Summit switches, E4G series routers, and pluggable interfaces such as, XENPAK, and XFP optical modules. This document includes the following sections: Component Support on page 1, +, and Q+ Support on page 10 XENPAK Module Support on page 23 XFP Module Support on page 25 Component Support Table 1: BlackDiamond 8800 Series Switches Component Support BlackDiamond 8800 Series Component Minimum BootROM Version MSM-48c MSM G48T-e G24X-e MSM G24X-c G96T-c G48X-xl G48T-xl G8X-xl G6X-xm G48Te G48Pe G48Ta G48Xa G48Tc G48Te G48Xc Rev 04 Published: April

2 Table 1: BlackDiamond 8800 Series Switches Component Support (Continued) BlackDiamond 8800 Series Component G24Xc S-G8Xc S-10G2Xc G4Xa G4Ca G4Xc G8Xc S-10G1Xc PSU Controller /1200 W AC PSU (Model # 60020/PS 2336) N/A 600/900 W AC PSU (Model # 41050/PS 2431) N/A (BlackDiamond 8806 only) 1200 W DC PSU (Model # 60021/PS 2350) N/A Minimum BootROM Version NOTE Upgrading the BootROM on a BlackDiamond 8810 or BlackDiamond 8806 switch is not automatic when software is upgraded. The user must be running the minimum required BootROM version or later. Use the install firmware command after upgrading the ExtremeXOS image to ensure that the BootROM is at the latest level. Table 2: BlackDiamond X8 Series Switches Component Support BlackDiamond X8 Series Component Minimum BootROM Version BDX-MM BDXA-FM10T BDXA-FM20T BDXA-10G48X BDXA-40G12X BDXA-40G24X AC Power Supply (Model # 48011) N/A 2

3 Table 3: BlackDiamond Switch Component Support BlackDiamond Component Minimum BootROM Version MSM MSM-1XL G2H G2X G6X G20X G60T G60X PSU Controller N/A 700/1200 W AC PSU (Model # 60020/PS 2336) N/A 1200 W DC PSU (Model # 60021/PS 2350) N/A Table 4 lists the part numbers for the BlackDiamond modules with the Rev. D ASIC: Table 4: BlackDiamond I/O Modules with Part Numbers I/O Module 8000 Level Part No Level Part No. G60T , after Rev , after Rev. 03 G60X , / after Rev , after Rev. 03 G20X , after Rev , / after Rev G2X , after Rev , / after Rev G2H , / after Rev , after Rev G6X , / after Rev , after Rev

4 Table 5: BlackDiamond Series Switches Component Support BlackDiamond Series Component Minimum BootROM Version MSM-5 (BlackDiamond 12804) MSM-5 (BlackDiamond 12802) MSM-5R (BlackDiamond 12802) MSM-5R (BlackDiamond 12804) MSM-6R XM-2X N/A XM-2HR N/A XM-2XR N/A GM-20T N/A GM-20XT N/A GM-20XTR N/A PSU Controller N/A 700/1200 W AC PSU (Model # 60020/PS 2336) N/A 1200 W DC PSU (Model # 60021/PS 2350) N/A Table 6: BlackDiamond Series Switches Component Support BlackDiamond Series Component Firmware Version Required with ExtremeXOS GM-40X uc 2.9 FPGA: A FPGA: P FPGA: T FPGA: W1 & W2 0.0.d BootROM HM-2X24GA uc 2.9 FPGA: A FPGA: P FPGA: T FPGA: W FPGA: D1 0.0.b BootROM

5 Table 6: BlackDiamond Series Switches Component Support (Continued) BlackDiamond Series Component XM-8X uc 3.0 FPGA: A FPGA: P FPGA: D1 and D2 (manual upgrade) 0.0.b FPGA: T1 & T FPGA: WH BootROM XFM-1 (shown as Fabric-1 through Fabric-5) (BlackDiamond 20808) uc 2.9 XFM-2 (shown as Fabric-1 through Fabric-5) (BlackDiamond 20804) uc 2.9 MM Basic uc 2.9 FPGA: S 0.3.e BootROM PSUCTRL 3.0 Fan Tray (BlackDiamond 20808) uc (shown as Revision ) 2.9 Fan Tray (BlackDiamond 20804) uc (shown as Revision ) 2.9 Firmware Version Required with ExtremeXOS NOTE Use the check firmware version command to verify that all components on the BlackDiamond series switches (I/O modules, fans, and so on) are running the latest version of ExtremeXOS firmware. If the command output shows that one or more components are not running the latest firmware, use the install firmware command to update all down level components. Be sure to run the show slot, show fans, show power, and show fabric commands to verify that all components are installed and operational before attempting to upgrade or downgrade the switch firmware. Table 7: Summit X150 Series Switches Component Support Summit X150 Series Component Minimum BootROM Version Summit X150-24t switch Summit X150-48t switch Summit X150-24p switch

6 Table 8: Summit X250e Series Switches Component Support Summit X250e Series Component Minimum BootROM Version Summit X250e-24p switch Summit X250e-48p switch Summit X250e-24t switch Summit X250e-48t switch Summit X250e-24x switch Summit X250e-24tDC switch Summit X250e-48tDC switch Summit X250e-24xDC switch Table 9: Summit X350 Series Switches Component Support Summit X350 Series Component Switch Model Summit X350-24t switch Summit X350-48t switch Option Cards XGM2-2bt N/A XGM2-2sf N/A XGM2-2xf N/A XGM2-2xn N/A Minimum BootROM Version Table 10: Summit X440 Series Switches Component Support Summit X440 Series Component Minimum BootROM Version Summit X440-8t switch Summit X440-8p switch Summit X440-24t switch Summit X440-24p switch Summit X440-24t-10G switch Summit X440-24p-10G switch Summit X440-48t switch Summit X440-48p switch Summit X440-48t-10G switch Summit X440-48p-10G switch

7 Table 11: Summit X450a and X450e Series Switches Component Support Summit X450a and X450e Series Component Summit X450a Series Summit X450a-48t switch Summit X450a-48tDC switch Summit X450a-24t switch Summit X450a-24tDC switch Summit X450a-24xDC switch Summit X450a-24x switch Summit X450e Series Summit X450e-24p switch Summit X450e-48p switch Summit X450e-24t switch Summit X450e-48t switch Option Cards XGM2-2bt N/A XGM2-2sf N/A XGM2-2xn N/A XGM2-2xf N/A Minimum BootROM Version Table 12: Summit X460 Series Switches Component Support Summit X460 Series Component Switch Model Summit X460-24p switch Summit X460-24t switch Summit X460-24x switch Summit X460-48p switch Summit X460-48t switch Summit X460-48x switch Stacking Modules SummitStack SummitStack-V Option Cards XGM3-2sf N/A XGM3S-2sf N/A XGM3S-2xf N/A XGM3SB-4sf N/A Minimum BootROM Version 7

8 Table 13: Summit X480 Series Switches Component Support Summit X480 Series Component Switch Model Summit X480-24x switch Summit X480-48t switch Summit X480-48x switch Option Cards VIM2-10G4X N/A VIM2-SummitStack N/A VIM2-SummitStack N/A VIM2-SummitStack-V N/A VIM3-40G4x N/A Minimum BootROM Version Table 14: Summit X650 Series Switches Component Support Summit X650 Series Component Software Version Switch Model Summit X650-24t switch Summit X650-24x switch Option Cards VIM1-10G8X N/A VIM3-40G4x N/A VIM1-SummitStack N/A VIM1-SummitStack N/A VIM1-SummitStack N/A Minimum BootROM Version NOTE Upgrading the BootROM on Summit family switches is not automatic when software is upgraded. You must be running the minimum required BootROM version. Use the download bootrom command to download a BootROM image. 8

9 Table 15: Summit X670 Series Switches Component Support Summit X670 Series Component Manufacturing Part No. Minimum ExtremeXOS Minimum BootROM Version Switch Model Summit X670-48x switch Rev Rev Summit X670V-48x switch Rev Rev Option Card VIM4-40G4X N/A N/A Table 16: E4G Series Routers Component Support E4G Series Component Software Version Minimum BootROM Version E4G-200 router E4G-200 CLK module N/A E4G-200 F16T1E1 module N/A E4G-400 router XGM3S-2xf option card N/A XGM3S-2sf option card N/A XGM3SB-4sf option card N/A E4G-B16T1E1 option card N/A 9

10 , +, and Q+ Support Table 17: BlackDiamond 8800 Series Switches /+/Q+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX FX or (not supported in ) 1000BASE-T FX/1000LX BX /100/1000BASE-T copper ER LR LRM SR direct-attach passive copper cable 1 meter meters meters meters Q+ SR4 Q Q+ direct-attach passive copper cable 0.5 meter meter meters meters Q+-to-+ direct-attach fan-out passive copper cable 3 meters meters Q+ direct-attach active optical cable 10 meters meters meters

11 Table 18: BlackDiamond X8 Series Switches /+/Q+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX BX ER LR LRM SR direct-attach passive copper cable 1 meter meters meters meters Q+ SR4 Q Q+ direct-attach passive copper cable 0.5 meter meter meters meters Q+-to-+ direct-attach fan-out passive copper cable 3 meters meters Q+ direct-attach active fiber cable 10 meters meters meters Table 19: BlackDiamond Series Switches Support LX LX Industrial Grade LX SX

12 Table 19: BlackDiamond Series Switches Support (Continued) SX Industrial Grade ZX BASE-T BX Table 20: BlackDiamond Switch Support LX LX Industrial Grade LX SX SX Industrial Grade ZX FX/1000LX BASE-T BX Table 21: BlackDiamond Switch Support LX LX Industrial Grade SX SX Industrial Grade ZX LX FX/1000LX BASE-T BX Table 22: BlackDiamond Series Switches Support LX LX Industrial Grade SX SX Industrial Grade ZX LX BX /100/1000BASE-T copper

13 Table 23: Summit X150 Series Switches Support LX LX Industrial Grade SX SX Industrial Grade ZX LX BASE-BX BASE LX BASE-FX for fast Ethernet ports (P/N 10067) BX Table 24: Summit X250e Series Switches Support LX LX Industrial Grade SX SX Industrial Grade ZX LX BASE-FX for fast Ethernet ports (P/N 10067) BASE BX BASE LX BASE BX NOTE The XGM2-2sf ports are 10-Gb + ports and do not support 1-Gb optics (PD ). Table 25: Summit X350 Series Switches /+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX FX (P/N 10063) BASE BX

14 Table 25: Summit X350 Series Switches /+ Support (Continued) Pluggable Interface Type 10/100/1000BASE-T copper (not supported on combo ports) + (XGM2-2sf option card required) ER LR SR LRM direct-attach passive copper cable (XGM2-2sf option card required) 1 meter meters meters meters

15 . Table 26: Summit X440 Series Switches Support Type LX LX Industrial Grade SX SX Industrial Grade ZX LX FX (P/N 10063) BASE BX FX/1000LX BASE-FX for fast Ethernet ports (P/N 10067) BASE-LX BASE BX NOTE The XGM2-2sf ports are 10-Gb + ports and do not support 1-Gb optics (PD ). Table 27: Summit X450a Series Switches /+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX FX (P/N 10063) FX/1000LX (Summit X450a-24x) BX /100/1000BASE-T copper (not supported on combo ports) + (XGM2-2sf option card required) ER LR SR LRM direct-attach passive copper cable (XGM2-2sf option card required) 1 meter meters

16 Table 27: Summit X450a Series Switches /+ Support (Continued) Pluggable Interface Type 5 meters meters

17 NOTE The XGM2-2sf ports are 10-Gb + ports and do not support 1-Gb optics (PD ). Table 28: Summit X450e Series Switches /+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX BX (XGM2-2sf option card required) ER LR SR LRM direct-attach passive copper cable (XGM2-2sf option card required) 1 meter meters meters meters

18 Table 29: Summit X460 Series Switches /+/Q+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX BASE-LX BX FX (P/N 10063) BX BASE-FX for fast Ethernet ports (P/N 10067) 100FX/1000LX /100/1000BASE-T copper (XGM3-2sf or XGM3S-2sf option card required) ER LR SR LRM direct-attach passive copper cable (XGM3-2sf or XGM3S-2sf option card required) 1 meter meters meters meters Q+ (used for stacking with SummitStack-V80 option card) SR4 Q Q+ direct-attach active optical cable (used for stacking with SummitStack-V80 option card) 10 meters meters meters Q+ direct-attach passive copper cable (used for stacking with SummitStack-V80 option card) 0.5 meters meter meters meters Q+-to-+ fan-out passive copper cable (used for stacking with SummitStack-V80 option card) 3 meters meters

19 Table 30: Summit X480 Series Switches /Q+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX BASE-FX for fast Ethernet ports (P/N 10067) 100BASE-LX BASE-FX BX FX/1000LX FX (P/N 10063) BX /100/1000BASE-T copper Q+ (used for stacking with VIM2-SummitStack-V80 module) SR4 Q Q+ direct-attach active optical cable (used for stacking with VIM2-SummitStack-V80 module) 10 meters meters meters Q+ direct-attach passive copper cable (used for stacking with VIM2-SummitStack-V80 module) 0.5 meters meter meters meter Q+-to-+ fan-out passive copper cable (used for stacking with VIM2-SummitStack-V80 module) 3 meters meters

20 Table 31: Summit X650 Series Switches /+/Q+ Support Pluggable Interface Type BX LX LX Industrial Grade SX SX Industrial Grade ZX LX /100/1000BASE-T copper 1000 speed support only + ER LR SR direct-attach passive copper cable 1 meter meters meters meters Q+ (used for stacking with VIM3-40G module) SR Q Q+ direct-attach active optical cable (used for stacking with VIM2-SummitStack-V80 module) 10 meters meters meters Q+ direct-attach passive copper cable (used for stacking with VIM2-SummitStack-V80 module) 0.5 meters meter meters meters Q+-to-+ fan-out passive copper cable (used for stacking with VIM2-SummitStack-V80 module) 3 meters meters

21 Table 32: Summit X670 Series Switches /+/Q+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX /100/1000BASE-T copper Note: Not supported on the Summit X670V switch. + ER LR SR direct-attach passive copper cable 1 meter meters meters meters Q+ (requires VIM4-40G module) SR4 Q Q+ direct-attach active optical cable (requires VIM4-40G module) 10 meters meters meters Q+-to- direct-attach fan-out passive copper cable (requires VIM4-40G module) 3 meters meters Q+ direct-attach passive copper cable (requires VIM4-40G module) 0.5 meter meter meters meter

22 Table 33: E4G Series Routers /+ Support Pluggable Interface Type LX LX Industrial Grade SX SX Industrial Grade ZX LX BASE-LX BX FX (P/N 10063) (not supported on E4G-400 combo ports) 1000BX BASE-FX for fast Ethernet ports (P/N 10067) 100FX/1000LX (not supported on E4G-400 combo ports) 10/100/1000BASE-T copper (not supported on E4G-400 combo ports) + (XGM3S-2sf or XGM3SB-4sf option card required) ER LR SR LRM direct-attach passive copper cable (XGM3S-2sf or XGM3SB-4sf option card required) 1 meter meters meters meters

23 XENPAK Module Support Table 34: BlackDiamond Series Switches XENPAK Support XENPAK Module ER LR SR ZR LW LX Table 35: BlackDiamond Series Switches XENPAK Support XENPAK Module ER LR SR ZR LW LX Table 36: BlackDiamond Series Switches XENPAK Support XENPAK Module ER LR SR ZR LW LX Table 37: Summit X350 Series Switches XENPAK Support XENPAK Module ER LR SR ZR LX

24 Table 38: Summit X450a Series Switches XENPAK Support XENPAK Module ER LR SR ZR LW CX LX Table 39: Summit X450e Series Switches XENPAK Support XENPAK Module ER LR SR ZR CX LX NOTE XENPAKs not supplied by Extreme Networks will show up as Unsupported Optic Module in the show ports x:y information detail and show ports x:y configuration command output. 24

25 XFP Module Support : Table 40: BlackDiamond 8800 Series Switches XFP Support XFP Module ER LR SR ZR Tunable DWDM (40 channels) Tunable DWDM (80 channels) Table 41: BlackDiamond Series Switches XFP Support XFP Module ER 12.2 LR 12.2 SR 12.2 ZR 12.2 Tunable DWDM (40 channels) Tunable DWDM (80 channels) Table 42: Summit X350 Series Switches XFP Support XFP Module ER LR SR ZR Table 43: Summit X450a and X450e Series Switches XFP Support XFP Module ER LR SR ZR

26 Table 44: Summit X460 Series Switches XFP Support XFP Module (requires XGM3S-2xf option card) ER LR SR ZR Tunable DWDM (up to 80 channels) Table 45: Summit X480 Series Switches XFP Support XFP Module ER LR SR ZR Tunable DWDM (40 channels) Tunable DWDM (80 channels) Table 46: E4G-400 Cell Site Aggregation Router XFP Support XFP Module (requires XGM3S-2xf option card) ER LR SR ZR Tunable DWDM (up to 80 channels) AccessAdapt, Alpine, Altitude, BlackDiamond, Direct Attach, EPICenter, ExtremeWorks Essentials, Ethernet Everywhere, Extreme Enabled, Extreme Ethernet Everywhere, Extreme Networks, Extreme Standby Router Protocol, Extreme Turbodrive, Extreme Velocity, ExtremeWare, ExtremeWorks, ExtremeXOS, Go Purple Extreme Solution, ExtremeXOS ScreenPlay, ReachNXT, Ridgeline, Sentriant, ServiceWatch, Summit, SummitStack, Triumph, Unified Access Architecture, Unified Access RF Manager, UniStack, XNV, the Extreme Networks logo, the Alpine logo, the BlackDiamond logo, the Extreme Turbodrive logo, the Summit logos, and the Powered by ExtremeXOS logo are trademarks or registered trademarks of Extreme Networks, Inc. or its subsidiaries in the United States and/or other countries. sflow is the property of InMon Corporation. Specifications are subject to change without notice. All other registered trademarks, trademarks, and service marks are property of their respective owners. 2011, 2012 Extreme Networks, Inc. All Rights Reserved. 26